Tag Archives: Captain America

#1070: Sam Wilson – Captain America, Vision, & Kate Bishop – Hawkeye

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , ,

SAM WILSON – CAPTAIN AMERICA, VISION, & KATE BISHOP – HAWKEYE

MARVEL LEGENDS SERIES

falccapviskateguy1

Wow, Hasbro sure is swamping us with Marvel Legends, aren’t they?  After a fair delay, the Giant-Man Series finally hit just about everywhere, very closely trailed by the Juggernaut Series.  The Abomination and Dr Strange series are also starting to hit in some areas as well. On top of that, there have been a number of exclusive items, with Walgreens getting two figures right on top of each other, and Walmart getting a pair of exclusives (that I still need to find).  There have also been two boxed sets: the Civil War Spider-Man set (which had a movie Spidey alongside re-decoed versions of Cap and Iron Man), and a set containing Sam Wilson as Cap, Kate Bishop as Hawkeye, and Vision…as Vision!

THE FIGURES THEMSELVES

This trio is exclusive to Toys R Us and is loosely themed around looks from the post-Axis Marvel Now! stuff.  Sam and Kate both follow a firm legacy heroes theme, which kind of makes Vision stick out a bit.  Of course, flip-side, Sam and Vision are both part of the main Avengers line-up, and Kate isn’t.  So, exactly who’s left out is really up to you.

SAM WILSON – CAPTAIN AMERICA

falccapviskateguy5We’ve gotten him in both Minimate and 3 3/4-inch form, so it was about time we got a FalCap Marvel Legend.  Bonus points for being the first Sam Wilson Legend since the Toy Biz run!  The figure is about 6 1/2 inches tall and he has 32 points of articulation.  Structurally, he shares several pieces with 2014’s Marvel Now! Cap figure.  He has the arms, legs, and pelvis from that figure, along with an all-new head, torso, belt, and shoulders.  The Now! Cap parts aren’t a perfect match for FalCap’s design, but they’re close enough to work without too much trouble.  The new pieces match up well with the older parts, and are pretty decent sculpts on their own terms as well.  I wasn’t 100% sold on the head sculpt at first glance (as with so many of Hasbro’s Cap sculpts, I think it looks a little too mean for the character), but after having it in hand, I actually don’t mind it.  His hair seems a little closer cropped than his usual comics appearance, but it’s not like it’s completely wrong or anything.  All in all, it’s one of those sculpts that has some minor flaws here and there, but looks a lot better as a whole, which is what really matters.  The paintwork on FalCap is pretty solid. The shades on the colors are a bit more subdued than those on Now! Cap, which is fair, since he was probably a little too bright.  These colors look about right for Sam’s comics design, and still have enough vibrance to give him some pop.  The application of said paint is decent enough, though there’s still a bit of slop, especially on the switches from blue to white.  He could be a little better, but he could also could be far worse.  FalCap includes his mighty shield, which is all well and good, but what he doesn’t include are his wings.  Sure, he doesn’t always have them, but he does most of the time, and their omission here is a bit glaring.

VISION

falccapviskateguy3Vision’s a popular guy!  This is his third Legend in the last year, and the second time he’s been in one of these exclusive three-packs.  This time around, he’s based on his Daniel Acura-designed look from the latter half of Remender’s Uncanny Avengers run, which also happens to be the costume he’s wearing currently.  If I’m honest, it feels a little over designed, though, and I miss the yellow.  Also, the red bits make it look like he’s running around half naked.   That said, I like it a bit better then his first Now! look.  The figure is about 6 1/4 inches tall and he has 32 points of articulation.  He’s built on the Bucky Cap body, with a new head and an add-on for the cape.  I was a bit disappointed with the last Vision head sculpt, so I’m happy they didn’t re-use it a third time here. This may well be my favorite Legends Vision sculpt.  It just captures the character quite nicely, and is very sharply defined features.  The cape is kind of an awkward design, but it’s been translated into three dimensions well enough.  It’s definitely a better attempt at a cape than the one Hasbro was using before (which, judging by all the currently shown figures, has been justly retired from the line).  Paint is the one real downside to this guy.  Of the three figures included in this set, this guy definitely has the sloppiest paint in the bunch.  It’s just all over the place.  I mean, he looks okay from a normal viewing distance, but up close he’s got a lot of rough edges, and there’s a few spots where the paint doesn’t really follow the sculpt very well.  That being said, the colors are at least nice and vibrant, and he stands out quite nicely on the the shelf.  Vision doesn’t get any accessories, but I can’t really think of what you’d give him, so that’s okay.

KATE BISHOP –  HAWKEYE

falccapviskateguy2At long last, Kate Bishop makes her way into the action figure world!  It took them long enough, since the rest of her Young Avengers teammates were released way back in 2006.  Of course, this costume doesn’t technically match the rest of them, and we still don’t have Cassie Lang, but let’s not kick the gift horse in the mouth here.  Kate here is sporting her more recent, jumpsuit look from the pages of the last two Hawkeye series.  It’s not a bad look (and it makes me feel a little bad that I never got one of the Now! Hawkeye figures), and it’s the one she’s been wearing for the last several years.  The figure is about 6 inches tall and she has 27 points of articulation.  She’s built on the Phoenix body, which is definitely a good one.  It works pretty well for Kate, especially since this is the slightly more grown-up version of Kate from the last few years.  She gets a new head and lower legs, which blend well with the rest of the body.  The head does a very good job of capturing Kate, and possesses a lot more personality than is usually seen on female figures.  Kate also got a new left hand for gripping her bow, which is cool.  She has to make due with the basic open gesture right hand to be her drawing hand, which isn’t perfect, but isn’t as bad as you might think.  She also gets an add-on piece for her belt and quiver, which sits very nicely, and does a great job of completing her look.  Kate ends up with the best paintwork of the three figures in this set (which is nice, since it’s her debut figure and all).  It’s still not 100% perfect, but it’s pretty close.  Kate is packed with her bow, which is the same one included with the last few Hawkeyes, but with proper paint this time around.  Some arrows might have been nice, but the lack of them isn’t new to this figure, so it’s not hugely surprising.

THE ME HALF OF THE EQUATION

I picked these guys up from my local TRU last month.  I was actually searching (unsuccessfully) for the Juggernaut series at the time, so these guys were a little bit of a surprise.  This is a set I’ve been eagerly awaiting, ever since it’s announcement.  Kate is the main draw, of course, since she’s never had a figure before, and I’m a pretty big Young Avengers fan.  She’s the strongest figure in the set, too, making her the   real star here.  That being said, FalCap was somewhat overdue, the new Vision is much appreciated, and both figures are both really solid additions to the line.  Unlike prior sets, all three figures included here are real winners, and I don’t think any of the three feels like a forced heavy hitter.

falccapviskateguy7

#1030: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , ,

CAPTAIN AMERICA

MARVEL LEGENDS SERIES

Cap12inchML1

In 2006, Toy Biz was in their last year of making Marvel toys. In that year, they were committed to offering Marvel figures in just about every style imaginable. Marvel Legends was their flagship line, so they used its name on a few different things, including the double-sized Marvel Legends Icons. When Hasbro picked up the Marvel license, they continued Icons for a few more series, but the line ultimately fizzled. With Marvel Legends back on the upswing, Hasbro has decided to give the scale/style another try. Of course, like the recently renamed 3 ¾ inch line, this new line has *also* just been named Marvel Legends Series, which makes differentiating between all the lines a bit difficult. It’s Star Wars: The Black Series all over again! Oh well, might as well just look at this here Captain America.

THE FIGURE ITSELF

Cap12inchML2Captain America is one of the first three figures in the 12-inch Marvel Legends Series. He uses a variation of Cap’s “Marvel Now” look, which is a pretty solid meshing of the comic and movie styles. The figure actually comes in at 11 ¾ inches, so he’s just under 1/6 scale. He has 32 points of articulation, which includes moving shoulder pads, but doesn’t include any actual waist movement. He does still have some movement further up on the torso, but it doesn’t offer quite the same movement. When Toy Biz did the Icons figures, most of them had sculpts that were more or less up-scaled versions of some of their 6-inch Legends. At first glance, I thought Hasbro may have just up-scaled the 6-inch Marvel Now! Cap, but this figure appears to have an entirely new sculpt. The overall quality of the sculpt is quite good. The uniform exhibits a number of fun textures, which make it look like it’s been assembled from a number of different materials. I particularly like the knit appearance of the white areas of the costume. I also quite like that you can actually see the zippers and stuff that show how the costume would be put on in real life. It’s nice that Hasbro is taking advantage of the larger scale to add in details that you might not expect to see. One of my main issues with the smaller-scale Now! Cap (and most of Hasbro’s comic Caps) was the head, which I felt didn’t have the classically heroic look I’d expect from a Captain America. This figure does a bit better, mostly due to the larger scale, but I can’t help but feel that his eyes are just the slightest bit too wideset. It’s not enough to ruin the figure, but it’s enough to bug me a bit. The helmet is a separate (non-removable) piece from the actual head, which is a nice touch, which helps sell that it’s a helmet. Cap’s paintwork is pretty decent. Perhaps not as impressive as it could be, given the scale, but it’s still pretty nice considering Hasbro’s track record with such things. There are even a few bits, such as the kneepads, where they even go above and beyond what we’ve come to expect, and give us some actual detail texture work. Cap includes an extra, unmasked head, as well as a spare empty helmet for him to hold, two sets of hands in fist and gripping positions, and, of course, his mighty shield. The shield is tied into the figure’s “action feature.” When you press the star on Cap’s chest, the star on his back pushes out, and can be flipped over and plugged into the center of the shield. The shield’s straps can then be removed and it can be mounted on Cap’s back. It seems like a rather complicated way of handling something that’s usually done with a simple peg system, but I guess that might not have worked as well at this scale.

THE ME HALF OF THE EQUATION

When this guy was announced at Toy Fair, I was actually pretty excited. I mean, yeah, it’s another Captain America, but it’s a pretty cool one. My parents bought me this figure on my birthday this year, at my request. I can’t say that I would spend $50 on every figure this line decides to offer, but I feel like Cap was worth it, and I’m happy to have him. Here’s hoping Hasbro can make this line a success!

Cap12inchML3

#1000: Captain America – Rescue Uniform Version

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CAPTAIN AMERICA – RESCUE UNIFORM VERSION

CAPTAIN AMERICA: THE FIRST AVENGER (HOT TOYS)

CapRescue1

Yes, dear reader, you read that review number correctly. Today marks the 1000th review on The Figure in Question! That’s a pretty big number, isn’t it? It’s kind of a turning point, since from here on out, that 0 at the beginning is gone. Goodbye little 0. You served me well.

Okay, let’s get the next 1000 reviews kicked off with one of my special Deluxe Reviews! This one is another Hot Toys figure, once again from their massive subset of Marvel Studios figures. As I noted in #0900, I generally try to avoid doubling up on characters when it comes to high-end collectibles. The one major exception to this, however, is Captain America. I’ve got a bit of Captain America addiction, mostly due to The First Avenger being my favorite of the Phase I solo films. In TFA, Steve has two distinct Captain America uniforms. The first is the Star Spangled Man look and the second is his main battle uniform. The figure I’m looking at today is sort of the bridge between those two looks.

THE FIGURE ITSELF

CapRescue2Rescue Uniform Captain America was figure 180 in Hot Toys’ Movie Masterpiece Series. He was one of the three SDCC exclusive figures from Hot Toys in 2012, though he didn’t technically ship until after the con. The Rescue Uniform is so called in reference to Cap wearing it during his mission to rescue the Hydra-captured Allied soldiers at The First Avenger’s mid-point. Pretty much, it’s some fatigues and a bomber jacket thrown over the “Star Spangled Man” costume, in reference to the times during WWII set comic stories where Steve wore his costume under his fatigues to maintain his secret identity, as well as the WWII battlefield uniform from The Ultimates. The figure is a little over 12 inches tall and, according to Sideshow’s website, he has “over 30 points of articulation.”

First up, let’s look at the figure’s head sculpt. This was Hot Toys’ first stab at an unmasked Chris Evans. Although CapRescu3later figures would come closer with the likeness, this is far from a bad first try. Facially, I think it’s pretty spot-on. What really seems to throw the whole likeness off just a tiny bit is the hair, which is much more matted to the head than Evans usually has it. That being said, it’s supposed to be under the helmet, so it doesn’t look that off. All-in-all, it’s not one of the strongest heads HT’s ever done, but it’s still a solid piece. My only real complaint is that it seems a little less textured than other sculpts. That’s pretty minor, though. The paintwork is nice and solid, looking just as lifelike as ever. The hair is a touch darker than usual, but this, coupled with the more matted sculpt, sells his hair as being sweaty and matted, which seems pretty accurate to what happens when you go on a mission wearing a metal helmet.

Cap’s costume is quite involved, and impressively so. He doesn’t get the whole “Star Spangled Man” costume; just the torso portion of the shirt and the trunks. That’s more than enough to sell the effect, though, and what we can see matches up pretty much perfectly with the full SSM Cap from later on. He also gets a faux-leather jacket, a pair of khaki trousers, gaiters, and a two-part harness with lots of pouches. The pieces are all very nicely tailored and fit well on the chosen body. He also gets a pair of sculpted shoes, which are both incredibly well detailed. As with the SSM Cap, the star logo on his torso is a sculpted element as well, which plugs into the center of his chest. The most important piece of his outfit is his helmet (and by extension, the goggles on the helmet). The helmet is two pieces (as a proper WW II helmet would be). The under piece is plastic, and has the straps and such attached to it, while the over piece is metal, and quite solid metal at that. It’s very nicely textured, and looks like the real prop from the movie. It also sits on his head just right, and is pretty secure when in place. The goggles are a little difficult to get on the helmet at first, but once they’re in place, they stay put and they look pretty great too.

Cap(Rescue)AccessoriesCap’s underlying body is a bit better than the last Cap I looked at, given that it’s less of a Frankenstein creation. It’s just a pretty standard muscle body, which means he loses some articulation for the sake of the upper body’s appearance. But, that just ends up making him a bit more realistic, and it’s a good fit for this particular design.

Captain America includes a somewhat smaller accessory compliment, due to the more complex costume. However, he still gets a few cool items, including:

  • 6 different hands
  • Machine gun
  • Pistol (w/ holster)
  • Knife (w/sheath)
  • Shield
  • Display stand

All of the hands are sculpted wearing the leather gloves he has in the movie. There’s a pair of fists, a pair of relaxed hands, a grip for the shield, and a grip with a trigger finger for the two guns.

The weapons are all very nicely sculpted to match the in-film props. The two guns have moving pieces, just like their real counterparts would, which is certainly a fun bonus. The holster and sheath can be attached to the figure, with the holster attaching to the belt on the waist and the sheath tying onto his shin. These all allow for a complete rescue look.

The shield is the same piece as the SSM version. However, while that one was totally clean, this one has scrapes and dirt all over it, matching the figure’s more battle-ready appearance. It’s definitely some solid work, and it helps to differentiate him from the other figure even further. It would have been nice to also get a version of the shield with a dent from where Red Skull punched it, but this is the more important of the two, so I’m happy to have it.

Lastly, there’s the display stand. It’s the same basic stand we’ve seen lots and lots of times before, but it still works for what it’s supposed to do, so that’s good.

THE ME HALF OF THE EQUATION

Rescue Cap isn’t one of my first Hot Toys figures. He’s not even my first Hot Toys Cap. He is, however, the figure that is the most responsible for just how many Hot Toys figures are in my current collection, because he’s one of the earliest HT figures that I bought for myself. Rescue Cap is one of my favorite looks from the movies, so when HT first showed the prototype, I was eager to get him. It took a while for him to finally get slotted as a con exclusive, but he finally did and I sat on Sideshow’s website for several hours the day he went up for sale to make sure I got one. He’s probably my favorite HT figure I own, if I’m honest. There’s just a lot to like about this figure, and, above all, he’s a ton of fun! Of course, getting this figure led me to want to finish out the TFA Cap set, as well as picking up the Avengers Cap and, by extension, the rest of the Avengers. So, there was that…

CapRescue5

#0986: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CAPTAIN AMERICA

MARVEL SUPER HEROES (TOY BIZ)

“When Captain America throws his mighty shield! All Foes who chose to oppose his shield must yield!”

–Captain America Theme Song

My first introduction to Captain America was through VHS copies of the ‘60s cartoon. As cheesy as they are, I loved every minute of them. Sadly, in the mid-90s, when I was becoming so fond of Cap as a character, he was more or less absent from toy shelves. I eventually got the Spider-Man: The Animated Series version when it was finally released, but the figure I always wanted was Toy Biz’s first version of the character, which I’ll be looking at today!

THE FIGURE ITSELF

Captain America was released in Series 1 of Toy Biz’s Marvel Super Heroes line. This Cap stands just under 5 inches tall and has 7 points of articulation. This figure predates elbow articulation becoming a standard for Toy Biz’s Marvel stuff, as they were still very much aping the Kenner Super Powers style, and none of those had elbow movement. Really, this whole figure in general feels like a Captain America figure done to fit with Super Powers (well, aside from size, since he’s taller than any figure Kenner put out), which is far from a bad thing. Rather than the more ‘90s-esc proportions of which Toy Biz would later become so fond, Cap is pretty subdued, and looks more or less like a real person. His torso features some awesome detailing for the scale-mail, and I love the way they’ve sculpted the star logo so as to make it pop a bit more. Figures of Captain America have the unfortunate tendency to miss the mark on the good Captain’s face. I guess he’s just one of those characters where it has to be just right. I think this figure’s the closest anyone’s ever gotten to my ideal Captain America, at least from a comic-based perspective. It’s a little round by today’s standards, but I really like the overall style present here.  There’s just a certain sincerity to it that lots of Caps lack. Cap’s paintwork is quite nicely handled, especially for the time. The colors are all nice and bold, and he really sells the whole patriotic super hero thing. His eyes are admittedly a little wonky, and it would have been nice for his belt buckle to be something other than the unpainted blue plastic, but those are relatively minor complaints. Cap was packed with his mighty shield, as well as a weird launching device for it. However, my figure sadly lacks these pieces.

THE ME HALF OF THE EQUATION

As I noted in the intro, this was a figure I really wanted growing up. Unfortunately, he was released before I got into collecting, and wasn’t very easy to find after the fact. So, I had to settle for the US Agent repaint from a few series later. In fact, my dad, as awesome as he was, even bought me an extra US Agent and we painted him up in proper Cap colors, which held me over quite nicely. This particular figure ended up being one of the fifteen figures I picked up at the last Balticon. I’m glad to finally have the official version, and he’s aged a bit better than a lot of Toy Biz’s output from the same time period.

CapMSH3

#0960: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA

MARVEL LEGENDS (HASBRO)

CapCW1

Despite the movie being out for over a month now, the tie-in toys for Captain America: Civil War are still coming out in little dabs and trickles, here and there. There are three assortments of Marvel Legends being released this year to coincide with Civil War, and while the first of those three has been out for a few months, the actual movie-related figures are in the second and third assortments. The second set is starting to hit stores now, and today I’ll be taking a look at the latest version of Captain America!

THE FIGURE ITSELF

CapCW2Cap is part of the second series of this year’s Captain America-inspired Marvel Legends. The series has officially been dubbed the “Giant-Man Series,” after its Build-A-Figure. The figure is about 6 inches tall and he has 32 points of articulation. He’s based on Cap’s appearance in Civil War…sort of. Why “sort of”? Well, if you’re a faithful follower of the site, this guy probably looks familiar. That’s because his sculpt is 100% the same as the one used for the Age of Ultron version of Cap. Which in turn means it’s using everything but the torso from the Winter Soldier STRIKE Suit Cap. That’s not a terrible thing; those are both strong figures, mostly due to the high quality of the sculpt.  And, to be fair, the three designs aren’t that different from each other. However, the AoU figure made some compromises on his design for the sake of re-use from the STRIKE Suit Cap, so this figure inherits those compromises, in addition to having several of his own. The AoU figure at least got the new torso to somewhat make up for it, but this figure doesn’t get anything new. At the very least, a new set of hands without the extra holes in the gloves would have been nice. Also, while the sculpt is still very strong, minor flaws that weren’t a big deal the first time around, such as the slightly small stature of the figure, become much more noticeable with each iteration. This isn’t a bad sculpt at all, and independent from the other two figures to use it, this Cap is still quite good. The paintwork on this figure is a marked improvement over the AoU figure, at least in terms of application, which is all around much sharper and exhibits far less bleed over. The actual palette is much more subdued than the AoU figure, which I think suits the sculpt a bit more than the brighter look of the AoU Cap. For accessories, Cap includes his shield (the same as the ones included with the other two Caps), and the head of Giant-Man. He lacks the unmasked head and extra hands of the last two figures, which coupled with the much smaller B-A-F piece and the totally reused sculpt is a serious step down in terms of value.

THE ME HALF OF THE EQUATION

Super Awesome Girlfriend and I found this figure at a Walmart on the way back from the beach. She asked if I wanted him and I decided I’d be good and skip him, since I already have the other two. So, she decided she’d buy Cap anyway, for herself. Then, when we walked out of the store, she turned to me and said: “Upon further thought, I don’t have space for this Captain America right now. I think I’ll have to leave it with you. Do you think you can take care of it, like a shared custody thing?” She’s crafty that one.

This figure perplexes me. I’ve gotten more or less the same figure twice before, but this time he’s got a far less impressive accessory complement. Plus, they’re putting almost the exact same figure in a three-pack with Spidey, only that one had the missing accessories. I should be annoyed by this figure. But I’m not. Actually, he’s my favorite of the three Caps, and I don’t feel like he’s a waste at all. It’s weird.

CapCW3

#0953: Captain America & Winter Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA & WINTER SOLDIER

MARVEL MINIMATES

Cap&WSCW1

As big a movie as it was, one of the best parts of Captain America: Civil War was that it didn’t abandon the plot threads of its predecessor, The Winter Soldier. Cap and Bucky’s friendship was front and center, and their desire to look out for each other forms the emotional core of the film. Neither character is a stranger to toys, but they’ve gotten a few movie specific figures, including some Minimates, which I’ll be looking at today.

THE FIGURES THEMSELVES

Captain America and Winter Soldier are part of Marvel Minimates Series 66, which is the first of two series based on Captain America: Civil War. Like Panther & Iron Man, these two are one of the sets shared between the specialty and TRU assortments.

CAPTAIN AMERICA

Cap&WSCW2Cap’s STRIKE Suit in The Winter Soldier is generally viewed as one of the stronger MCU designs, so it’s not a shock that his subsequent looks have been tweaks on that design. His Civil War design isn’t much different than his AoU design, just with a few minor changes here and there. Because of the similarity in designs, this Cap and the Series 61 Cap are constructed from the same selection of pieces: add-ons for the helmet, harness, belt, and gloves.  These are all pretty great pieces, and they work very nicely capturing Cap’s onscreen design. Cap’s paintwork is also pretty strong. His costume is exquisitely detailed, and the linework is some of the sharpest that I’ve seen on a Minimate in some time. There’s some minor issue with the basic color work, such as the misplaced “A” on the forehead and the slight bleed over from the brown of the gloves onto the “fingers.” However, the overall paint looks pretty solid. Under the mask, there’s a very angry Steve Rogers, which matches up well with the Mark 46’s Tony expression. For accessories, Cap includes his shield, a shield-bearing hand, an extra hairpiece for an unmasked look, and a clear display stand.

WINTER SOLDIER

Cap&WSCW3Though he might seem a little lacking compared to his pack -mate’s eight different MCU-based Minimates, Bucky here has still gotten three MCU-mates of his own. This one is based on Bucky’s look from the back half of the film. It’s admittedly not quite as exciting a look as the one he was sporting in Winter Soldier, but it’s not terrible. The figure is about 2 ½ inches tall and he has 14 points of articulation. Bucky has two add-on pieces, both re-used: one for his hair and on for the bottom bit of his jacket. The hair isn’t quite a perfect match (since his hair’s a bit shorter this time than it was last time), but it’s close enough to work. Bucky’s paint isn’t quite as solid as Cap’s. A lot of it’s the design, which just doesn’t allow for as many fun details, but there are also a few instances of slop or smears, most noticeably the red star on his shoulder. In addition, there’s one notable flaw: his left hand. The fingers should be silver, since that’s his robotic side, but the figure gives fleshy fingers to both hands. It’s a rather simple mistake, and not too difficult to correct. The likeness on the face is a bit generic, but there’s some definite resemblance to Sebastian Stan. In terms of accessories, this Winter Soldier is a little lacking compared to the last movie’s version. He includes a pistol, an SMG, two knives, and a clear display stand. That’s an okay assortment, but I feel like a rifle would have been a better fit.

THE ME HALF OF THE EQUATION

This set was picked up at the same time as Panther and Iron Man. I don’t find this set to be quite as strong as that one, but it’s not bad. Cap’s a pretty strong figure. He’s not super different from the AoU version, but he definitely has a superior paint job. I think that the Series 55 version of Winter Soldier is still my preferred version, but this one’s still a pretty solid ‘mate.

#0939: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CAPTAIN AMERICA

MARVEL SUPER HEROES SECRET WARS (MATTEL)

CapSW1

For about a decade now, Hasbro has held the Marvel license. At the same time, Mattel has held the DC license. However, for a short period of time, the licenses were actually reversed. Well, sort of. In the ‘80s, Kenner Toys (who were later purchased by Hasbro) held the DC license and produced the popular DC Super Powers line. At about the same time, Mattel was given the Marvel license, and produced the Marvel Super Heroes Secret Wars line. It was nowhere near as successful as Super Powers, but it did manage to produce a few Marvel mainstays, including Captain America, who I’ll be looking at today!

THE FIGURE ITSELF

CapSW2Captain America was part of Series 1 of the Marvel Super Heroes Secret Wars line. As noted in my Wolverine review, the line was designed to tie-in with the Secret Wars maxi-series being published by Marvel Comics (a series that was itself being published because Mattel had requested a comic they could more easily produce a tie-in for). Cap was one of three Avengers produced by the line, with the other two slots being filled by Iron Man and Falcon. The figure is about 4 ½ inches tall and he’s got 5 points of articulation. The Secret Wars line was built pretty heavily on parts re-use, but Cap only used the standard torso. His head, arms, and legs were all unique pieces (though the legs would later be used for the Europe-exclusive Iceman figure). They do a decent enough job of capturing Cap’s look, though, like just about every figure in the line, he’s rather devoid of detail. The Secret Wars figures had a physique that, to quote my friend Jill, “looks like dough.” On the plus side, the gloves and boots do showcase a bit more detail than was often seen in this line. Cap’s face is also appropriately heroic. I do have to wonder where his ears have gotten to, though. Cap’s paintwork is certainly bold, with all the proper colors. It’s not particularly exciting, if I’m honest. There’s not much beyond the most basic work, and even then, some areas still feel a bit phoned in: the belt is only present at the very front, and he only gets two red stripes on each side. There are also sloppy edges all over the place, and all of the painted details are notoriously prone to paint wear. Cap’s lone accessory was a shield. That might seem appropriate, but it’s not; rather than give him his actual shield, Mattel instead gave him a wonky lenticular shield, with the same secret identity revealing gimmick as seen with the rest of the line. Yes, Mattel actually made a figure of Captain America and didn’t give him his mighty shield. They went there.

THE ME HALF OF THE EQUATION

Despite being an older figure, Cap is a relatively new acquisition. I found him at a rather cool antique store that I went to with my parents, just two weeks ago. Secret Wars has never been my thing, but there are a few figures I have an appreciation for, and Cap was one of them. Is he a fantastic figure? No, he’s really not. He’s kinda dopey, and he’s several steps behind what Kenner was doing at the same time with Super Powers. However, I must admit having an affinity for sort of dopey figures, so I find myself quite liking this guy.

CapSW3

#0927: Captain America & Crossbones

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN AMERICA & CROSSBONES

CAPTAIN AMERICA: CIVIL WAR MINIVERSE

CrossbonesCap1

Well, here it is; today’s the day of the official release of Captain America: Civil War. By the time this is posted, I’ll have already seen the movie, and hopefully I’ll have enjoyed it immensely. In honor of the film, I’ll be taking a look another set of figures from Hasbro’s smaller-scale line. I’m going full-on #TeamCap today, with the main man himself, as well as his returning foe, Crossbones.

THE FIGURES THEMSELVES

Cap and Crossbones are part of the first series of Captain America: Civil War Miniverse figures. This is one of two sets in the first series that isn’t Team Cap vs. Team Iron Man, but it’s still a versus set, and it’s probably the most sensible pairing of the bunch.

CAPTAIN AMERICA

Like Vision, Cap is getting his second 2 ½-inch figure here, following the one he got from Age of Ultron. This figure stands about 2 ¾ inches tall and has 5 points of articulation. Cap’s design has changed again for Civil War (though it’s probably the most minor set of between film changes he’s gotten), and as such he’s gotten an all-new sculpt. It’s not too bad, though there are a few issues with proportions. Most notably he seems to be missing his neck, which throws off the size of his head relative to his shoulders and just makes him look a bit odd. Other than that, the sculpt’s actually quite good. There’s some great detail work on the costume, and he’s fairly accurate to the source material. He even has more normally-sized feet than the last two, which is nice to see. Cap takes a bit of a dive on the paint side of things. It’s not really the quality of what’s there (though there are some issues with application, such as the skin tone of the face going over the chinstrap of his helmet), but rather what’s not there. His legs feature not paint at all, leaving the boots and kneepads blue, and his gloves are straight brown, leaving his fingers the wrong color. The worst part is his torso, which looks alright from the front, but has all the paint rather jarringly end at the sides, leaving his back completely unpainted. Could they not spring for just a few more paint apps? On the plus side, Cap has the most extra parts of anyone in the series. He includes his shield, which is pretty nicely sized. He also gets the wonky clip-on armor in this set. If you thought Bucky’s armor was weird, wait ‘til you get a load of Cap and his…spinning bicycle wheels? Yeah, still not quite getting these.

CROSSBONES

CrossbonesCap2Crossbones is another returning character from The Winter Soldier, though this is the first time he’s actually been “Crossbones” (he was just “Rumlow” in the last film). Crossbones is a fairly prominent recurring Cap villain in the comics (where he was the right-hand man of Red Skull), but time will tell as to whether he’s as prominent in the movies. The figure’s the same height as Cap and has the same articulation as well. He has a new sculpt based on Crossbones’ new armored look from the film, which is a pretty awesome look if I do say so myself. The actual figure? Eh…he’s okay, but definitely a little wonky. Above the waist, he’s actually not too bad; he’s got decent proportions and some very nice detailing on the armor. The legs are what really throws him off. They’re oddly shaped, and lack a lot of the detailing seen on the rest of the figure. It’s almost like they came from a different figure, but I honestly can’t say what sort of figure on which they wouldn’t look out of place. Crossbones has minimal painted details, but that’s more or less appropriate for him, since he’s mostly just black and white in the film. He’s lacking any detailing for his eyes, but that’s actually pretty forgivable at this scale. The white details are actually pretty convincingly worn, which is quite impressive given the work on the rest of the figures. Crossbones includes no accessories.

THE ME HALF OF THE EQUATION

After getting Vision and Winter Soldier from my parents, I decided to pick up a few of the other sets, including this pair. These two are definitely more movie specific that the last pair, but they feel a little less balanced than the prior set. Both figures are pretty cool overall, but both have fairly major setbacks (the paint in Cap’s case, and those wonky legs in Crossbones’). All in all, not a bad set, especially for the price, but I do hope we see Crossbones at a larger scale later.

#0900: Captain America – Star Spangled Man Version

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CAPTAIN AMERICA – STAR SPANGLED MAN VERSION

CAPTAIN AMERICA: THE FIRST AVENGER (HOT TOYS)

CapSSM1

Whelp, looks like I’ve stumbled my way through another 100 reviews, bringing my total reviews up to a resounding 900. Wow, that’s a lot. I need to get a life. Oh, right, the toys. The toys are my life. That works out, then. As is customary for all reviews divisible by 100, I’ll be doing another Deluxe Review.

When you’re dealing with high-end action figures, where each figure costs a small fortune, you would think that you might want to avoid doubling up on characters. By and large, that’s been what I’ve attempted to do in my high-end collecting. However, there was one main exception: Captain America. For some reason, I just kept buying the guy. Cap’s costume in the Marvel Studios movies has minor changes in each film, in an attempt to take him just a little closer to his comics counterpart. However, he actually started out in a costume that was an almost exact replica of his classic comics look, even if it ended up being a bit of a joke.

THE FIGURE ITSELF

CapSSM3Captain America was released as figure number 205 in Hot Toys’ Movie Masterpiece Series. He was one of three figures “exclusive” to San Diego Comic Con 2013 (I say “exclusive” because he was available through Sideshow’s website, and didn’t actually ship until a while after the con). Chronologically, he’s the first of the three exclusives. This version of Cap hails from Captain America: The First Avenger, and is based on the propaganda costume Steve wears during the “Star Spangled Man” musical montage (hence the name). With the exception of covering up his ears (for silly practical reasons like being able to turn his head), it’s a pretty straight recreation of his comics look. The figure stands roughly 12 inches tall and has “over 30 points of articulation” according to the blurb on Sideshow’s site.

CapSSM4While masked and unmasked heads have more or less become the norm on HT’s Cap figures now, this guy only includes the masked look. This is presumably due to him being a follow-up figure to the Rescue version, which was unmasked. The head sculpt is the usual HT quality; tons of little detail work that makes it look like the real person it’s emulating. Well, it looks like a real person. There’s certainly a bit of Evans in there, but it’s not as spot-on as other HT sculpts. Also, his face looks oddly out of proportion with the rest of his head, like it’s just a bit too big. This probably isn’t helped by the fact that his neck is nowhere near as thick as it is in the movie, which makes him look slightly bobble-headed and less heroic. The expression on his face is rather serious, which seems a bit out of place for this costume within the context of the movie, but makes sense when you recall that a major appeal of this figure was selling it to people who just wanted a comics accurate Cap. The texturing on his mask is pretty nicely done; it seems a bit heavy when viewed up close, but looks just about right when viewed from a little further away. The head is finished off with an absolutely top-notch paintjob, which does a lot to distract from some of the more minor issues present here.

CapSSM2Cap’s costume makes use of seven different pieces; He has a cloth bodysuit, which makes up the majority of his costume, as well as a pair of shorts to go over it and a belt. The pieces are fairly well tailored, but not completely without issue. The shorts seem a bit more obtrusive than they were in the movie, and the red and white stripes on the torso stick out a little bit on the sides. The star symbol is actually a sculpted piece, which plugs into the center of his chest, in order to keep it properly centered. There are sculpted pieces for the boots and the tops of the gloves, which are very nicely handled and do a great job of simulating the leather used for the real items in the movie.

The weakest part of this figure by far is the underlying body. While I haven’t undressed my figure, I’ve seen pictures of the underlying body; it’s a Frankenstein’s Monster of earlier base bodies, which don’t all quite fit together, resulting in some odd gaps. The gaps have been filled with padding, which does an alright job, but has to be shifted from time to time to prevent him from getting weird lumps, and it also gets in the way of some of his articulation. Also, for reasons I can’t begin to fathom, the arms they chose are the ones with the most limited elbow movement available, which is incredibly limiting in what you can do with the figure, and makes little sense, since the joints could have easily been hidden by the sleeves.

Cap’s accessories complement does a fair bit to make up for the somewhat lackluster body. He included:CapSSM6

  • 7 different hands
  • Tommy gun
  • Pistol (w/ holster)
  • Grenade (w/ pouch)
  • Utility belt (w/ two pouches)
  • Ammo belt
  • Leather strap
  • Shield
  • Cue cards
  • Display stand

The hands are all sculpted to match up with the top parts of the gloves on the costume. They come in relaxed (R and L), fists (R and L), tight and loose grips (both L), and a trigger finger (R). The one glaring omission here is a pointing hand for an “I Want You” style pose. You can sub in the trigger finger (as I did), but it’s not quite the same.

The Tommy gun, pistol, grenade, utility belt, ammo belt, and leather strap are all based on the sequence in the montage where Cap is filming a propaganda film. The gun is the coolest piece, and it even has a removable ammo drum, with a few rounds visible at the top. All in all, these paces make for a pretty cool alternate look.

CapSSM5The Shield is the coolest piece, not necessarily for itself (though it is a good recreation of the first shield in the movie), but for the cue cards. In the movie, Cap has a speech about buying war bonds, which he has to give at each Star Spangled Man performance. It’s revealed during the montage that he has cue cards with the words from the speech taped onto the inside of his shield. It’s a brief little moment, but a cool character piece. You have to attach the cards yourself, but it’s a super cool touch that HT included them, and it offers a fun extra that most companies would overlook.

Finally, there’s the display stand, which is a fairly standard, run of the mill piece, but nice to have regardless.

THE ME HALF OF THE EQUATION

This Cap is the “newest” of my HT Caps. The First Avenger was my favorite Phase 1 solo film, and I love the whole Star Spangled Man sequence, and Cap’s costume is one of the most distinctive in comics, so I was pretty excited when this figure was first shown off. Then there was the waiting (since it took over a year from showing him at a con for him to actually get a slot in the line). I bought him through Sideshow’s site when he was finally listed. Then the real trouble began. See, Sideshow ships through UPS, and they require a signature for delivery. I missed the driver the first two times Cap went out for delivery, and wouldn’t be home for the third, so I contacted UPS about having him held for pickup at the distribution center. They told me they weren’t allowed to do that, and that he’d be sent back to Sideshow if I wasn’t there the next day. A few calls later, I was told to just show up for pick-up that evening, despite it not being officially set-up. Well, surprising no one, that didn’t work out, resulting in another 5 hours of phone calls, before I was finally get it all sorted out, and was able to pick him up the following morning. After all of that, this better be the best darn Cap figure I’ve ever owned, right? Well, not quite. Honestly, he’s not a bad figure, but he’s probably the weakest of the Cap figures I have, due mostly to the weird body. Still, I’m glad I have him, and he rounds out my set of First Avenger Caps quite nicely.

#0890: Captain America & Scarlet Witch

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN AMERICA & SCARLET WITCH

MARVEL MINIMATES

Cap&ScarletWitch1

When Minimates first started out, getting just one Avenger was a pretty big deal.  It’s less of a big deal now, especially when it comes to heavy hitters like Captain America and Iron Man.  That said, it’s still kind of cool to get those slightly less well-known Avengers, like Scarlet Witch.  Although, it’s hard to imagine Scarlet Witch being quite as overlooked following her fantastic appearance in Age of Ultron and upcoming appearance in Captain America: Civil War.  Time will tell.

THE FIGURES THEMSELVES

Cap and Scarlet Witch were released as part of the 16th series of Toys R Us exclusive Marvel Minimates.  They were done to sort of tie-in with the release of the Marvel Now!-themed Series 51.

CAPTAIN AMERICA

Cap&ScarletWitch2This figure is Cap’s 29th foray into the world of Minimates (although it’s only the 27th for Steve Rogers as Cap) and it showcases Cap’s redesign following the Marvel Now! relaunch.  The design still shares most of the pivotal details of Cap’s traditional costume, while also working in a few more movie-esque parts.  Cap makes use of add-on pieces for his helmet, gloves, and belt.  Each of these is a brand-new sculpt, and they are all quite well handled.  The helmet is a very adept recreation of the comics design, and it features etched in lines for the ‘A’ and the head wings.  The gloves are bulky, but not overly, and they offer a more intricate, stylized take on the character’s traditional flared gloves.  The left glove has a peg allowing it to be used with the shield, and it can be swapped out with a non-pegged hand for display sans-shield.  Lastly, the belt is a fairly straight forward piece, which does its job without being obtrusive.  Isn’t that what belts are for?  The painted detailing on Cap is really quite good.  Some of the white areas on the helmet miss their mark just a slight bit, but the detail work, specifically on the figure’s torso which features an intricate hexagonal design, is very sharp and brings a lot of dimension to the figure.  Also, even after all this time, I still marvel (heh) when Diamond gets the eye placement perfect on a figure.  The eyes here line up exactly with the painted face, and it just looks really cool.  For accessories, Cap includes the standard clear base, as well as his mighty shield, and a hairpiece that allows him to be displayed unmasked.

SCARLET WITCH

Cap&ScarletWitch3Wanda Maximoff, aka the Scarlet Witch, hasn’t received anywhere near as many Minimates as the good Captain.  However, this was her third Minimate and it was even released in fairly close proximity to the second.  That’s not bad for a character most people hadn’t heard of before Avengers: Age of Ultron.  Like Cap, Wanda is presented here in her first Marvel Now! costume.  Unlike Cap, it moves a bit further away from the “classic” design.  YMMV on how well that works out, but there were far worse redesigns during Now!  Wanda has additional sculpted pieces for her hair/headpiece and the bottom of her jacket.  These are new to the figure.  The headpiece is similar to the two prior Wandas, but it sits a little lower, and the hair is a little fuller.  It makes for a good rendering of John Cassidy’s illustrations of the character in Uncanny Avengers, which I feel certain is what they were going for.  The bottom/skirt of her jacket is similar to Cap’s belt; it’s not the most thrilling piece ever, but it does what it’s supposed to.  It’s nice that it has a more organic shape and flow to it than a lot of skirt pieces, so there’s that going for it.  Wanda’s paint is mostly a mix of reds, befitting a character named the Scarlet Witch.  The metallic red of the head piece certainly pops, although there’s a fair bit of bleed over from her hair, made more noticeable by the aforementioned popping of the metallic red.  Aside from that, the paintwork is relatively clean.  The detailing on the torso block is fairly sharp and does a fairly nice job of giving her a more feminine figure.  Wanda is accessorized with a clear display stand and a pair of spell-casting hands, which were first introduced on the AvX Scarlet Witch.  They were cool there and they’re cool here.  They’re a great representation of her powers as they are usually depicted in the comics, and they make the figure stand out a bit more on the shelf.

THE ME HALF OF THE EQUATION

I got these two from TRU’s online store.  Things actually went pretty smoothly that time.  Generally, I overlook variants of A-listers, and I wasn’t super thrilled then Cap’s Now! redesign was unveiled, but I find myself very impressed with the quality of this figure.  He reminds quite a lot of the original Wave 5 Cap, and that’s a very good thing.  Wanda is one of my favorite Avengers, so I’m always happy to see her turn up in the various Marvel toylines.  The Now! look isn’t my favorite, but it’s unique and it is certainly a valid choice for a figure.  Being released in close proximity to a more classically inspired Wanda, this one comes across as a little less exciting.  Still, it’s a solid Minimate and a decent version of the character.