Tag Archives: Captain America

#0743: Falcon as Captain America & Red Onslaught

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

FALCON as CAPTAIN AMERICA & RED ONSLAUGHT

MARVEL MINIMATES

Falcap&Redons1

Change is an interesting thing in comics. While big sweeping changes to the established rules are a near constant, it is, at its heart, a very status quo based medium. No matter how great the change, things will always even out in enough time. In the last decade Marvel and DC have both become very entrenched in doing their best to convince everyone that this change will be the one that sticks, before inevitably resetting everything back to where it was. Ultimately, Bruce Wayne will always be Batman again, Tony Stark will always be Iron Man again, Bruce Banner will always be the Hulk again, and Steve Rogers will always be Captain America again. But, it’s certainly okay to let others who take up those identities have their time to shine, especially if they’re a good fit, such as Sam Wilson, aka the Falcon, as the newest Captain America. I’ll be looking at the first official figure of him in the role today.

THE FIGURES THEMSELVES

Cap and Red Onslaught were released as part of Series 62 of Marvel Minimates. The whole series was based around the Axis cross-over event from last year. Yay.

FALCON as CAPTAIN AMERICA

Falcap&RedOns6Steve Rogers may have tons of Minimates under his belt, but this is only the third time Sam Wilson has made into ‘mate form. Here’s to lots more! As Captain America, Sam’s only actually had one look, so that’s the one DST’s gone with here. It’s actually a good merging of the Captain America and Falcon looks, and a pretty strong design all around, so I can’t really complain. Cap is built on the usual Minimate body, so he’s about 2 ½ inches tall and he has 14 points of articulation. He’s got 5 add-on pieces, used for his hair/goggles, harness, wings, and belt. These are all new pieces to this figure. They’re decently sculpted and accurate to the source material. The left wing has a peg to attach the shield, which is nice, but without an extra piece, it means that he’s permanently left with that pesky peg. Paint wise, Cap’s kind of a mix of good and bad. The colors are nice and bold, and the detail work is pretty sharp for the most part. However, the base color work is all over the place. Literally. He’s got a lot of slop and bleed over, especially on the mask piece. The overall figure looks alright, but that slop sure is annoying. Cap is packed with a spare hairpiece, his mighty shield, a pair of wristbands for a sans wings look, an extra wristband for use with the shield, a flight stand, and a clear display stand. That’s actually a pretty great assortment.

RED ONSLAUGHT

Falcap&RedOns3Red Onslaught. Oh, Red Onslaught. Let’s combine one of the most menacing Marvel villains with a literal walking Mega-Event. Brilliant. But hey, sales is sales. Plus, it means DST gets to reuse all those fancy parts they sculpted for the Series 50 Onslaught, so that’s a win for them. The figure makes use of 11 sculpted add-ons, all reused from the aforementioned Series 50 version. The parts are nicely sculpted, sharp looking, and they do a good job of bulking him up. Paint is where this guy really deviates from the series 50 counterpart. Where the 50 version was done up in metallic colors, this one is all flat colors, which make for a sufficiently different look. He’s also got the expected Red Skull detailing for the head, which is easily the best Red Skull we’ve gotten so far. The paintwork on the armor is good, but the real Falcap&RedOns4cool part here is what’s under the armor. He’s got a fully detailed Red Skull look underneath, which is certainly a cool touch. To aid with the alternate look, the figure has a black trench coat and a pair of black hands and feet, as well as an extra head and helmet to complete the Onslaught look, a cosmic cube holding hand, a bandaged stump (for Skull’s Uncanny Avengers look), and a clear display stand.

THE ME HALF OF THE EQUATION

So, I had no interest in Axis or any of its fallout, and as such wasn’t super excited by the prospect of a whole series of ‘mates based on the story. That said, I really like Falcon and the concept of him taking over Cap’s role is cool. The design translates very well to ‘mate form, even with its paint flaws. I was not initially enamored by having to buy Red Onslaught, but the extra Red Skull parts make the figure really worthwhile, especially since it’s the best ‘mate of the character so far. This is a really fantastic set, and I’m glad to have picked it up.

#0667: Captain America TTA Part B

Posted by Ethan Wilson in Reviews and tagged with , , , ,

WORLD WAR II CAPTAIN AMERICA & ARMORED CAPTAIN AMERICA

MARVEL MINIMATES

CapTTA1

“One of these days, I’ll get the other half of the set. I mean, everybody’s gotta have a crazy 90s armored Captain America in their collection, right? How could you not? “
–Ethan Wilson
The Figure In Question #0020: Captain America Through The Ages Part A

Hey guys! Guess what! I got the other half of that set! It totally happened! Aren’t you so excited? I sure am! Without further delay, let’s have a look at the second half of the Captain America Through the Ages boxed set!

THE FIGURES THEMSELVES

World War II Cap and Armored Cap make up the second half of the Toys R Us exclusive Marvel Minimates Captain America Through the Ages boxed set, which was released to coincide with Cap’s return to life a few years back. The other two figures in the set were Reborn Cap and Suspended Animation Cap, who I reviewed here.

WORLD WAR II CAPTAIN AMERICA

CapTTA2This set took a few cues from the Captain America: Reborn series that returned Cap to the land of the living. The default Cap was based on his appearance at the end of the series, and this Cap is based on his appearance early on in the series when he’s reliving his WWII days. It’s not incredibly far removed from his earliest comics appearances, but it has been given a few updates to make it just a touch more “real-world.” The figure is roughly 2 ½ inches tall and has 12 points of articulation (due to the sculpt of the boots). Cap has sculpted add-ons for his helmet, upper torso, glove cuffs, belt, and boots. He shares the boots and glove cuffs with the Reborn Cap in this same set, but other than that all of his pieces are new to him, and as far as I can tell they’ve remained unique. The helmet is a nice update on his original mask design, merged with just a touch of Ultimates styling. It ended up being the inspiration for the film take CapTTA4on the costume, so it looks pretty familiar nowadays. The upper torso is an interesting piece; it applies the more recent change of giving Cap three-dimensional scales on his upper torso and also serves to bulk him up a bit. I’m not typically a fan of the really obvious scales, but in this case it doesn’t look too bad; in fact, it kind of makes him stand out nicely from the crowd. Cap’s paintwork is noticeably more subdued here than on most versions of the character, but it’s definitely true to the design DST’s aiming to capture. It actually looks pretty cool, almost like a faded photo from the 40s. The paint is pretty great overall, with no issues of slop or bleed over to speak of. The underlying face has a nice Jack Kirby feel to it, which is perfect for a WWII era Cap. This version of Cap is packed with his original mighty shield, a spare, more classically inspired mask, and a spare hairpiece to display him unmasked.

ARMORED CAPTAIN AMERICA

CapTTA3From one extreme to the other. Behold, the 90s. Oh joy. In the 90s, Cap’s powers stopped working correctly, leaving him with brittle bones and stuff. So, like all good 90s heroes, he got powered armor. Yay. Here it is, in all its glory. He’s got 6 all new sculpted pieces, which, to date, still remain unique to him. Because no one else would ever touch something this ugly. To their credit, the pieces all do a pretty good job of capturing the design from the comics and translating it to fit on a Minimate body. Truth be told, the blocky nature of the line actually does the design some favors, and he manages to get some pretty great mobility, in spite of the bulky armor. The paintwork on this figure isn’t quite as great as WWII Cap, but it’s not bad. The metallic red works pretty well, and the stretched out A on the head captures the 90s styling pretty decently. And he’s even got a proper grimace under the helmet! There’s a bit of slop around the edges of the torso stripes and the head wings, but neither is horribly distracting. Armored Cap includes his trusty shield, done up to match the armor, as well as a hair piece (which has some pretty bad flashing on the sides. Yikes!)

THE ME HALF OF THE EQUATION

In case you’re wondering, no, I didn’t break down and buy these two for their inflated eBay prices. I actually had some restraint. I did, however, end up finding a sealed Cap TTA set while at Yesterday’s Fun. And the best part is that it wasn’t much more than retail! So, I got these two guys, along with spares of the other two, which is pretty awesome. This pair is an interesting combination. I fully admit to way underestimating WWII Cap. He might well be the best figure in the set. Armored Cap, though? Well, he’s better than I expected, but he’s still my least favorite. Honestly, I’m just glad to finally have the whole set!

#0620: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CAPTAIN AMERICA

MARVEL LEGENDS (TOYBIZ)

CapAmericaML1

My relationship with ToyBiz’s run on Marvel Legends was and still remains a love-hate one. I enjoyed the figures (though that’s widely changed over time) but collecting the line was one of the most grueling, frustrating experiences of my collecting career. Even from the start, things were pretty rough, with two of the four first series figures being in higher demand than the others. One of those two was Captain America, who up until this point was running short on good figures. But I got one, and that’s what matters to me!

THE FIGURE ITSELF

CapAmericaML2As noted in the intro, Captain America was released in the first series of Marvel Legends. The figure is 6 1/4 inches tall and features 36 points of articulation. The articulation is okay, but Cap is definitely hindered by being released before ToyBiz had perfected some of the joint styles. The neck and mid-torso movement are particularly limited, almost to the point of making you wonder why they even bothered. Cap’s sculpt was all new (in fact, I believe it remained completely unique to him) and it’s got some definite highs and lows. Let’s start with the highs. The head sculpt is quite good. In fact, it’s probably my favorite Captain America head sculpt to date. It has strong enough features, and has a determined expression while avoiding looking too angry. From the neck down, the sculpt takes a bit of a downturn. The proportions are a little wonky, and a lot of the muscles look strange and misshapen. Not terribly so, but definitely noticeably off. The hands are well sculpted, but they seem a little on the large side. The real issues with the sculpt are on the lower half, where the articulation becomes far more obvious, and we get things like the wonky duck feet he’s sporting. Still, as a whole the sculpt doesn’t seem too bad, and it’s certainly better than some of the other sculpts in the line, even the ones that came later. It just goes to show that a quality head sculpt can go a long way. The paintwork on Cap isn’t perfect, but it’s pretty decent. Slop and bleed over are both minimal, and the colors seem pretty good, if maybe a tad washed out. The patterning on the upper portion of the blue is pretty cool, though it’s a little jarring that it just stops on the under sides of the arms. Cap came packed with a display stand, sculpted to resemble the wreckage of a tank and a portion of brick wall, as well as a small plastic American flag, and a reprint of Captain America #100.

THE ME HALF OF THE EQUATION

While I was able to find his series-mate Iron Man when the series was first released, I was not quite so lucky with the good Captain here. At least, not at first. However a year or so later, KB Toys marked all of their Marvel Legends down to $4. Most of their stock was made up of easy to find figures from later series of the line, but I was able to find one lone Captain America amongst them, which I happily bought. And he’s stuck with me since. The figure is far from perfect, and he shows his age, but I must admit, after digging him back out for the review, I enjoy him a lot more than I thought I would. I think this guy might just stay out of storage for the time being.

CapAmericaML3

#0567: Captain America & Thor

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA & THOR

MARVEL MINIMATES

ThorCapAvAoU1

Alright, we’re starting to get into full swing here with the Age of Ultron Minimates reviews. I looked at two of the new comers and two of the mainstays of the main team. Today, I’ll be taking a look at another set of the returning team members. Interestingly enough, it’s my favorite member of the main team and my least favorite member of the main team, packed together, Captain America and Thor. Now, hopefully the Hemsworth fans won’t kill me before I finish the review.

THE FIGURES THEMSELVES

These two are part of the first assortment of Age of Ultron Minimates. Cap and Thor were one of the two sets of Age of Ultron-themed Marvel Minimates available in both the TRU assortment and Series 61 of the main Marvel Minimates line. Mine are the specialty release, and there are a few differences between Thor in the two releases, which I’ll get to shortly.

CAPTAIN AMERICA

ThorCapAvAoU2Chris Evans as Captain America may very well be one of my favorite things about the Marvel movies. His take on Cap is on par with Christopher Reeve’s Superman in terms of definitiveness. This figure is the 7th Minimate of his take on the character. He stands approximately 2 ½ inches tall and features the normal 14 points of articulation. Cap is based on his primary look from the film, which, as I noted in my review of the Marvel Legends version of the costume, is a tweak of his STRIKE team suit from The Winter Soldier. As such, it shares many of the same pieces with Series 55’s version of that suit. The helmet, harness, and belt are all the same, and they are just as good here as they were there. The gloves are a reuse of the ones seen on the AoU boxed set’s Nick Fury figure, and they represent a closer match to the gloves from the film than the WS pieces. The paintwork on Cap is generally not bad. There’s a bit of slop in a few areas, and, like the rest of the series, the detail lines could stand too be a little darker, but he looks pretty good overall. The face has a passing resemblance to Evans, which is certainly more than Hasbro’s managed. At first, I didn’t care for the facial expression, but it’s grown on me a little. I still feel that it should commit to either a calm expression or an aggressive one. This one is somewhere in between and ends up looking a little goofy. Cap includes his mighty shield (which is the same as all the previous movie shields), a hand for it to plug onto, a spare hairpiece (which is the same as last year’s Star-Lord, among others), and a clear display stand. These are mostly good pieces, but I don’t think the hair-piece works very well for Cap. It seems he was given this one so that he, Iron Man, and the two Hawkeyes didn’t all have the same hair, but it doesn’t work.

THOR

ThorCapAvAoU3So, hey, remember in the intro when I said Thor was my least favorite cinematic Avenger? Please don’t hurt me, I can explain. See, Thor’s never been one of my favorite Avengers. Yes, he’s a founding member, but he just doesn’t fit well with the whole team thing. Now, I do love Chris Hemsworth’s portrayal of the character in the movies, and I enjoy his interaction with the others, but I can’t say I’m hurt by him having reduced screen time in AoU. Anyway, Hemsworth’s Thor has shown up a little less frequently as a Minimate, with this only being his 5th appearance in the line. Thor is just a slight bit taller than Cap, though he’s only got 12 points of articulation, thanks to the boots. Thor is based on his sans-sleeves look from the film. Seeing as it’s the look he has for both the opening and closing battles, it’s certainly well chosen. It’s also more or less the same design he had in The Dark World, and the figure uses the same selection of parts as the Series 53 Thor from that movie. I don’t actually have that figure (cuz Malekith sucks), but these pieces are all pretty decent parts, and they result in a Thor that looks like Thor. Yay. Now, for paint, it’s important to note that I have the specialty release of Thor, which, simply put, means the paint is better. The TRU Thor was missing a fair portion of the silver detailing on the torso and prevalent instances of the detail lines of the face not lining up with the colors. These issues aren’t present here. However, the figure still has a fair bit of bleed over on the major color changes, and the whites of the eyes and mouth are still the slightest bit misalligned. Also, the face on this figure doesn’t particularly capture Hemsworth’s likeness, though it is DST’s best attempt to date. Perhaps his likeness is just hard to translate. Thor includes his hammer Mjolnir, a flying base, and a clear display stand.

THE ME HALF OF THE EQUATION

Like Iron Man & Black Widow, I picked up this set from my local comicbook store. This set is a little bit more exciting than yesterday’s, I think in part due to the strength of the two figures that these two are based upon. I’m glad to have another movie Cap in a more conventional set of colors, and this is the best movie Thor that I own (and I didn’t even have to buy a Malekith to get him!). All in all, this is a pretty decent set, and a worthy update on two rather important characters.

#0563: Ultron, Captain America, & Hulk

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ULTRON, CAPTAIN AMERICA, & HULK

MARVEL SUPER HERO MASHERS

UltronCap&IM1So, it’s been almost a whole week since I took a look at anything Avengers-related. I don’t know about you guys, but that feels a little bit too long to me. Fortunately, I’ve got another set ready to go, and it’s even got an Ultron in it! Yay!

This review marks my second look at one of Hasbro’s newest ventures, Hero Mashers, a somewhat more kid-aimed line of figures whose whole gimmick is that you, well, mash them together. It’s not exactly the highest brow concept, but as long as it’s fun, who cares?

THE FIGURES THEMSELVES

Ultron, Captain America, and Hulk make up a three-pack that is part of the Marvel Super Hero Mashers line. The set is exclusive to Target and it was released to sort of coincide with the release of Age of Ultron. Hulk and Cap are re-decos of previous figures, but this is currently the only way to get Ultron. I’d like to address upfront that these figures are mostly made up of previous Mashers parts, but since I am not really familiar with the line, I don’t quite know the origins of each part.

ULTRON

UltronCap&IM2Clearly, this guy’s the selling point of the set, it being his introduction to the line and all. The figure is about 6 inches tall and has 24 points of articulation. Design-wise, he seems to be an amalgam of various Ultron looks, though he does seem to skew more towards the modern side of things. I’m fairly certain that the only piece on this figure that is actually a new sculpt is the head. It’s a rather nice piece, with some pretty decent detail work. Ultron’s head is less affected by the stylization of the Mashers line than others, which definitely works in his favor. The body is a mix of pieces from various other figures in the line. He seems to draw mostly from Iron Man and Dr. Doom, which isn’t a bad choice of parts. For the most part, everything meshes together pretty well, though it is worth noting that his right hand is noticeably larger than his left. It’s not really an issue on a robotic character such as Ultron, but it does leave me wondering if it was intentional. I’m not super keen on the red energy blade thingy, which isn’t removable. Regular release Mashers tend to have more standard parts to replace the wonkier ones like this one, but Ultron seems to have gotten the short end of the stick on that one, with no additional pieces. That’s a little annoying. Ultron is mostly just molded in silver, though he does feature some minimal red paintwork for his eyes and mouth, as well as some slight detailing on the torso (which, it has been noted, when coupled with the sculpt of the chest ends up looking not unlike a frowning face. Can’t unsee it…) and the aforementioned red energy blade thingy. What’s there is cleanly handled, if a bit sparse. As previously noted, Ultron includes no accessory.

CAPTAIN AMERICA

UltronCap&IM3Cap is the first of the two repaints in the set. He stands 6 inches tall and has 24 points of articulation, just like Ultron. Cap is generally built from the same pieces as the series 1 version of Cap, with the exception of the hands and feet, which come from elsewhere, though I couldn’t begin to say specifically where. Cap is definitely more stylized than Ultron, though not to an unreasonable degree. Generally, he’s more squared off at the edges than the average Captain America figure. The hands present a similar problem to Ultron’s left hand, in that they have the what appear to be sections of railroad track permanently affixed to them. It’s less annoying here, given that this isn’t the only Cap available, but it’s still a little annoying that there isn’t an alternative. From the standpoint of paint, this figure ends up having a little extra value to it. See, instead of the usual blue, he’s got black, which actually makes him a pretty decent stand-in for lesser known Marvel hero US Agent. It’s also worth noting that the paint is all cleanly handled, with no issues with bleed over or slop. Cap is the only figure in this set to get an accessory; he comes armed with his mighty shield, which can be plugged into either of his hands.

HULK

UltronCap&IM4Last, and sadly least, it’s the Hulk. He’s the second repaint in the set, and easily the weakest figure (spoilers). Hulk is about 6 ½ inches tall and he features the same 26 points of articulation (check out those spinning fists!). Like Cap, he’s mostly built from the last Hulk, with different hands and feet. Hulk doesn’t translate as well to this style, being a character who should be a bit more organic. He’s got a neck that is the same size as Cap’s, which looks really strange. And then there’re the hands and feet, which are mechanical in nature for some odd reason. In addition, his right hand has a cannon of some sort affixed to it, and, just like the other two, there isn’t an alternate piece. Hulk ends up with a rather straightforward Hulk style paint scheme, though it’s not without issue. The hands and feet are a metallic green, in contrast to the flatter green of the upper arms, head, and torso, suggesting that maybe it’s armor or something. Also, the greens of head and arms don’t match the torso, which really bugs me. Like Ultron, Hulk is without any accessories.

THE ME HALF OF THE EQUATION

So, I was at Target with my Dad a few weeks ago, and they had this set. I knew of its existence, but I hadn’t actually seen it. It being Ulton’s debut in the line, I kinda had to go for it. Ultron’s definitely the best piece of this set. He’s just shy of greatness; it would be really nice to have an alternate left hand. Cap isn’t bad, but he’s not the most exciting, and Hulk is really just filling space. I feel like this set would be best for a kid who doesn’t have Hulk and Cap yet, since they are at least fun to mess with. For a collector, you’re essentially paying the price of three figures for an Ultron. For me it was worth it, but your mileage may vary.

UltronCap&IM5

#0542: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CAPTAIN AMERICA

MARVEL RETRO FIGURES (DIAMOND SELECT TOYS)

CapRetro1

So, today, you were probably expecting to read a review of that Marvel Legends Hobgoblin I’ve been building for the last week. Well, dear reader, you’re just going to have to test your patience on that one, because I’m going to be doing a bit of a theme for the next two weeks.  Aren’t I just the worst?

If you’ve been living under a rock for the last few months, you might be unaware that a little movie called Avengers: Age of Ultron is set to be released (in the US, anyway) on May 1st. That means that there are 14 days until it’s released. So, I’ll be counting down by doing a review of a figure of each of the film’s main characters each day between now and then.  Let’s kick things off with “The First Avenger” Captain America.

THE FIGURE ITSELF

CapRetro10Captain America is the second figure in Diamond Select Toys’ Marvel Retro Figures line, which is DST’s new line of figures based on the old Mego figures from the 70s. Cap follows Spider-Man and will be followed by Wolverine and Thor later this year. The figure is built on the line’s standard body, which is a re-fit Mego Type II body, with a few improvements by Paul “Dr. Mego” Clarke. Said body (with the addition of a head) stands roughly 8 inches tall and has 16 points of articulation. As I noted in my review of the Spider-Man figure, this version of the body has a sturdier construction than the original Mego bodies, and is even a little sturdier than DST’s previous Star Trek and Planet of the Apes retro lines. Just like Spider-Man, Captain America is essentially three figures in one. There are three complete sets, each consisting of a head, a costume, and accessories, and one body for them all to share. For the purposes of this review, I have provided two spare bodies of my own, but the actual set only has the one.

CapRetro9First of the three looks is Cap’s “vintage” look, which is the one that comes pre-built on the included body. He’s a recreation of the original Captain America Mego. The vintage Cap is widely remembered for the changes to his costume and his overall goofy look. This figure remains true to that. He uses the same head sculpt as the original figure. Purely looking at the sculpt of the head, it’s actually not bad. It’s a teeny bit dated, but it’s generally a fairly generic hero head. What really makes the head goofy looking is the paint, which has also been recreated here. Overall, it’s a pretty good match for the original Cap head. Some of the line work, particularly on the “shadow” of the mask, is a little fuzzy at the edges. Also, the already goofy eyes are made a little goofier by the fact that the pupils are just a tiny bit misplaced. It looks a little bit like he’s glancing to his right. The figure’s body suit is tailored to match the original, and they’ve done a pretty great job of that. It sits very nicely, and the colors of the cloth are all well-matched. The star emblem presents a bit of a problem. The original figure had a decal, which, over time, fell off of just about every single figure. On this one, it’s been replaced by a piece of thick pleather-like material. It’s an understandable change, but rather than properly affix it to the costume, it’s held on in the center with a rather simple threading. The end result is a) a fairly noticeable dot in the center of the logo and b) a logo which sticks up at the sides and doesn’t stay straight. Surely there had to be a better solution than that to get the logo to stay in place. The other essential piece of the costume is the boots. The original was notable for not having the proper buccaneer-style boots of Cap’s comic look, and that’s replicated here. The original Mego Cap boots, like all Mego boots, were molded in a thin, stiff plastic. Here, they’re done in a rubberier material, making them both sturdier and easier to get on and off the figure. This version of the figure includes the same one accessory as his vintage counterpart: his shield. The actual piece is a pretty straight re-cast of the original shield, but the decal is noticeably not as smoothly applied as the vintage one, which is too bad.

CapRetro4Second up is the updated take on the classic Cap design. Like Spider-Man, this figure is meant to be what a Mego Cap might look like with modern toy making technology at its disposal. To start with, the figure gets a brand-new head sculpt. This one offers a more… idealized take on Cap’s head. Where Spidey’s head felt like an evolution of the original head, this one feels more like a start from scratch. Many of the same elements are there, but placement seems better. The eyes aren’t buggy, the jaw is a little more chiseled, and the facial feature in general are a little bit more evenly place on the head, so he doesn’t have such a huge forehead going on. He also has a lot more detailing, especially on the actual mask which sports some seams along the top and a more defined set of eyeholes. The head is a little bit on the large side, and this is emphasized by the fact that the neck is perhaps a touch too long. It’s not terrible, but it is noticeable in light of Spider-Man, who had a more accurately proportioned head and neck. The paintwork on the head is pretty great. The colors are well chosen and everything is bold and mostly clean. The tailoring on the figure’s costume is tighter than the vintage one, and is actually a little too tight in a few areas. CapRetro5Once the costume is fully in place, it looks pretty good, but it’s a real pain getting it to that point. The material chosen for the costume is quite nice; the blues match very well with the mask and I like the scaled pattern on his upper half quite a bit. Also, the option to have him with or without the shorts is nice, though, once again, those can be a bit difficult to get on. The star is the same as the one on vintage costume, which is disappointing, but at the very least it’s consistent. This version of Cap fixes the vintage one’s issue with the boots, supplying a pair of the proper cuffed boots, grabbed, I believe, from the Mego version of Will Scarlett. They’re pretty straight forward and pretty much perfect for the character, so they’re a great choice. Cap includes three sets of sculpted hands, each sculpted with the proper gloved look for the character, and cast in a red that matches the cloth potion of the gloves. There is a pair of fists, a pair for saluting, and a pair in an open pose for shield throwing and such. Speaking of shield throwing, Cap also includes a brand-new version of his mighty shield. The rings and star are sculpted and then painted, rather than just being a sticker, resulting in a very nice final product. The figure also includes Cap’s original, pointed shield, done in a similar fashion to the round one.

CapRetro3Last up is Cap’s “alter ego,” Private Steve Rogers, wearing his WW2 Army uniform. The figure features a head sculpt built from the same base sculpt as the updated Captain America head, meaning they match up appropriately. According to the included booklet, this head was sculpted first and then reverse engineered into a Cap head. Truth be told, I do think this might be the stronger of the two heads. The Cap head certainly isn’t bad, but this one really feels like it gets the Mego aesthetic down and it captures the “classic” Steve Rogers look pretty much perfectly. It helps that it’s topped off with the cleanest paintwork of the three included heads; there’s pretty much not a drop out of line on this one. Steve’s outfit is made up of a shirt, pants, belt, tie, boots, and boot covers (EDIT: As an astute reader reminded me, the outfit also includes an extra set of regular flesh tone hands.  They’re identical to the ones that come on the body, so I’m not certain what their purpose is, but they’re there). Getting Steve’s uniform properly assembled is certainly quite a task, and it took me a good 15 minutes to do so, but he stays together pretty well once CapRetro7assembled. The uniform is well-tailored and the shirt in particular has plenty of layers to it. One thing I did notice is that on my figure the boot covers had two different lengths of elastic at the bottom, which is minor, but slightly annoying. The boots are very nicely sculpted, with lots of nice little details, and they go on fairly easily. Steve’s only accessory (unless you opt to give him the pointed shield) is his helmet, which sits very nicely on his head.

Like the Spider-Man set, this set also includes a booklet with a few articles about Mego and the creation of the set. It’s a pretty fun read, so there’s certainly some value to it.

The packaging is similar to that of the first. However, there were a few changes for the better. First of all, the reproduction of the original box isn’t glued in place this time, which is much appreciated. Additionally, the extra costumes are place on mock bodies instead of being clipped in place, which avoids the small holes the Spider-Man costumes suffered. Unfortunately, the extra pieces are still blister packaged in place, so they can’t be removed without tearing up the backing.

CapRetro2

THE ME HALF OF THE EQUATION

Growing up playing with my dad’s old Mego figures, I had one particular figure who was my favorite above the rest. That figure was Captain America. Sure, he was goofy, and inaccurate, but he was just so much fun. I would sit there at my grandparents’ house, watching my VHS copies of the 60s cartoon, holding that figure the whole time. When this line was announced and Cap was shown, there was no doubt that I was buying this figure.

Most of the time, when I get a figure, my initial reaction to the figure is rather indicative of my final opinion of said figure. In the case of Captain America, my initial reaction, especially to the updated version of the figure, was one of disappointment. I love the old Cap figure, and this one seemed to fall short of what I wanted. But then, I played around with him a bit, and I took the pictures for the review. And somewhere between taking the pictures and writing this review, I fell in love with this figure. I don’t know quite how it happened, but it did.

The set isn’t without its drawbacks. For the price they’re asking, some work could still be done on making the packaging a little bit more collector friendly and on making sure the costumes fit the figures as best they can. All that said, an admirable job was done on this figure, and I’m extremely happy to have gotten him.

CapRetro8

 

*Incidentally, I had originally intended to review a completely different Cap figure today. However, this guy arrived, and I didn’t want to push him back to after the Age of Ultron prep stuff, so I bumped that one. The rest of the AoU-themed stuff will be older figures from my pre-existing collection.

#0530: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

CAPTAIN AMERICA

MARVEL LEGENDS INFINITE SERIES

CapAoU1

We haven’t yet begun this year’s summer movie season, but it is fast approaching. The movie I’m most anticipating is May’s Avengers: Age of Ultron, which looks set to be a fantastic ride. Hasbro’s been steadily pumping out product in anticipation for the movie. Their 6-inch line started off with an assortment of exclusively comics based figures in Series 1, but Series 2 brings a few of the movie’s main players into the game (though still not freaking ULTRON!!! Sorry, I’m a bit impatient…) in true Legends style. First off, I’ll be taking a look at everyone’s favorite sentinel of liberty, Iron Patriot…no, sorry, Captain America!

THE FIGURE ITSELF

CapAoU2Captain America is part of Series 2 of Hasbro’s Avengers Marvel Legends Infinite Series. He’s one of three movie based figures in this particular series. The figure stands just over 6 inches tall, with 32 points of articulation. The figure is, of course, based upon Cap’s look from Age of Ultron, which appears to be a melding of the two costumes he had in The Winter Soldier. It feels like the closest we’ve gotten to the classic Cap design in the movies, so I’m a fan. If you feel like you’ve seen this figure before, that’s because you pretty much have, at least from a sculptural standpoint. Cap gets a new upper and lower torso, but other than that he’s a pretty straight re-use of the STRIKE Suit figure from the Winter Soldier line. This certainly isn’t a bad thing since a) the costume in the movie looks to use a lot of the same tailoring as the STRIKE suit, and b) the STRIKE suit figure had a pretty tremendous sculpt. All the texturing and fine details are still there and they still look really great. Also, it’s minor, but the belt has been glued in place on this figure, so it doesn’t rattle around like it did on the STRIKE suit Cap. The new torso matches up very well with the other parts, in style, size and texture, and it’s even a touch longer than the previous one, giving Cap some much needed additional height. Unfortunately, the paint is where the figure takes just a bit of a dip. From a general standpoint, it’s certainly passable, and better than that seen on Batroc the Leaper yesterday. However, it’s not quite up to the same level as STRIKE suit Cap, which makes the issues more noticeable. The colors are actually pretty well chosen, and he’s certainly more exciting to look at than CapAoU4the much more drab appearance of the last Cap. The biggest issue at play here is bleed over. Pretty much all of the base color work exhibits some form of it, which is really annoying. Also, the white on his lower torso isn’t consistent, letting the underlying blue plastic show through in a couple of spots. And to top it all off, the right eye on my figure is painted just off center, which makes Cap look just a tiny bit cross-eyed. Cap has pretty much the same accessory load out as the STRIKE figure: unmasked head, saluting hand, pointing hand, shield, and Thanos’ leg (subbing in for the Mandroid’s leg). The head, hands, and shield are all pretty much the same as the previous release. The head seems to have paint that’s just a touch better, and the shield is in the more traditional colors (which makes it look less over-sized, for some reason).

THE ME HALF OF THE EQUATION

Cap was purchased, along with the rest of Series 2, from Big Bad Toy Store. For the most part, I got him because I was getting the rest of the series, but I will admit to digging the new costume design. I definitely like the more traditional color scheme. The STRIKE suit Cap was one of Hasbro’s best Cap figures. This figure, making use of a lot of the same pieces, does pretty well. However, it’s really held back by the paint work. The level of detail just isn’t there this time, which is disappointing. Not enough to ruin the figure, but certainly enough to hold it back from being as great as it could have been. This figure should have overtaken the last movie Cap with ease, but instead the choice between the two comes down to personal preference of costume design. And that’s too bad.

CapAoU5

#0429: Infinity Minimates

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SPACE SUIT CAPTAIN AMERICA, ARMORED HULK, INFINITY THANOS, & THANE

MARVEL MINIMATES

Marvel Minimates is really just the line that keeps on giving. I have a pretty substantial back log of figures I already had before the site was started, so they were already going to show up a lot. However, they also provide new releases on a very regular basis. Which makes for even more frequent reviews. Yay.

Marvel Minimates is also one of the few Minimates lines to be fairly consistently supported by Toys R Us. TRU has carried 18 of their own exclusive series of the line. In addition, they’ve offered fans the opportunity to influence the line a bit with Fan’s Choice boxed sets based on certain events. Today, I’ll be looking at the most recent of those sets, based on last year’s Infinity cross-over. Full disclosure: I haven’t read any of Infinity, so I can’t really speak to any story specific stuff. I know the general gist of it, and I know who the one storyline specific figure in this set is.

THE FIGURES THEMSELVES

These four were released as part of a Toys R Us exclusive four-pack. The line-up was chosen via a poll on Toys R Us’s website. There were two other figures, Ronan the Accuser and Space Suit Iron Man, who did not make the cut for this set, but will be appearing in the TRU Series 19.

SPACE SUIT CAPTAIN AMERICA

There have been a fair number of Captain America ‘mates, especially recently, but this is the first time he’s been space worthy. It’s also the third ‘mate based on Cap’s Marvel Now! appearance. Cap’s clearly the “safe” figure in this set, but that’s not necessarily a bad thing. The figure is about 2 ½ inches tall and he sports 14 points of articulation. He’s based on Cap’s space-faring look from Infinity, which I understand is the look he had for most of the story. It’s basically just a tweak on his regular Now! design and it looks pretty good. The figure makes use of the standard Minimate body, with non-standard upper arms and hands, as well as add-ons for his helmet and space-y web gear. The hands and helmet hail from the previous two Now! Caps, which is a sensible re-use. They’re well-sculpted pieces that are accurate to the source material, so it’s a win-win. The upper arms originally appeared on the Series 49 Mark 42. They aren’t quite as warranted as the hands and helmet, but they’re reasonable enough as a generic set of tech-y arms. The web gear is the only really new piece present. It’s well enough sculpted, and it seems to be pretty accurate to the source material. It’s not the most exciting piece, but it does its job. Cap’s paint work is pretty decent. For the most part, everything is clean, and the details are sharp. However, the paint on the helmet/head is applied in such a way that is impossible for me to get the helmet off his head, which is rather annoying. Cap includes his mighty shield and a hand wield said shield (both reused from the previous Now! figures), as well as a hair piece (also from the Now! Cap), and a clear display stand. The shield is a bit sloppy paint-wise, and the hair is ultimately not very useful due to the issues with the helmet.

ARMORED HULK

Hulk here is a bit less space-ready than the Cap figure. As the name implies, he’s just an armored version of the character. The figure is over 2 ½ inches tall, closer to the 3 inch mark, and he features 12 points of articulation. He’s based on the character’s Now! look. This is the second Minimate based on the look, but the first one was more armor-lite. This is what the character’s looked like for most of the Now! run. The figure is built on the basic Minimate body, with non-standard pieces for the hands and feet, as well as add-ons for the hair, torso, upper arms, waist, torso extender, and upper legs. The hair and upper arms first cropped up on the Series 41 Mega Rage Hulk, the feet first appeared on TRU’s Hulk as Nul, the hands are from the Hulk TTA Maestro, and the torso extender, waist cover, and upper legs are from the TRU 16 Now! Hulk. The chest piece is the only truly new part, however it’s nicely handled. The reused pieces are used a such a way that it wasn’t immediately obvious that the torso was the only new part, which is a sign of good re-use. The shift from sculpted detail lines on the armor on the torso and upper legs to painted on the feet is a little bit jarring at first, but it’s not too bad. Hulk’s paint alright, but it could be better. There’s some bleed over on the transitions from armor to skin, and there’s some pretty bad slop on the back of the figure’s head and torso. The figure also suffers from the same stuck pieces that plagued Cap, something that is a common theme in this set. Hulk includes a clear display stand.

INFINITY THANOS

Thanos here is probably the biggest draw of this set. This is the third version of Thanos in the Marvel Minimates line, but it’s been five years since his last figure. If you’re a faithful follower of my reviews, you’ll recall I didn’t think the last one was very good. Plus, he’s set to be a major player in the Marvel Cinematic Universe in the next few years, so it’s really good timing. Thanos is the largest ‘mate in the set, coming in at just shy of 3 inches tall, and he has 12 points of articulation. He’s based on Thanos’s recent redesign from Infinity. It’s not far off from his original design, but there are a few differences in the execution of some of the details. Thanos uses the basic Minimate body as a starting point, with non-standard hands and feet, as well as add-ons for his helmet, torso, upper arms, waist, torso extender, and upper legs. The upper arms and legs are from the Series 41 Hulk, the extender is from the TRU 16 Hulk, and the waist cover is from a whole bunch of Minimates (I’m not sure who used it first). The helmet, torso cover, hands, and feet are new to Thanos, and they’re pretty good overall. The torso is probably the best piece. It has a lot of ornate detail work that looks really good. The hands and feet are decent, though they seem a little too rounded. The helmet is good in theory, but not quite in practice. It’s well sculpted, but it sits too low on the head, which obscures a lot of the details on the face. Thanos’s paintwork is pretty clean overall. There are a few spots with some bleed over, but most of it’s pretty sharp. The face in particular looks really good, and it definitely improves on the last one. Unfortunately, Thanos was not exempt from the stuck paint issues. His helmet was practically glued on when I got him and took quite a bit of effort to remove. Thanos includes a clear display stand. It would have been nice to get an Infinity Gauntlet that matched this figure, but since it wasn’t in the story, I can understand its absence here.

THANE

Hooo boy, Thane. This guy. So, Thane is the one new character in the set. He’s also new to the storyline, and he has a sort of important role, so I guess his inclusion makes sense. In case you were unaware, Thane is Thanos’s son and he’s half Inhuman, which sort of makes him a bit of a mess. The figure is about 2 ½ inches tall and has 14 points of articulation. Thane is based on the character’s appearance post-Terrigen Mist exposure, which is notably Thanos-inspired. It’s an okay design, though not particularly thrilling. The figure is mostly a “vanilla ‘mate” with his only unique piece being his left hand. This piece is re-used from the DC Minimates Series 6 Cheetah figure. It’s a pretty standard clawed-hand, so that’s good. The rest of Thane’s detail is done with paint. For better or worse, Thane exhibits the best paintwork of the lot. The base colors are clean and even, the colors are pretty bold, and the detail lines are nice and sharp. Thane didn’t have any issues with stuck pieced due to paint, although that’s likely due to his lack of add-ons. The figure includes a clear display stand.

THE ME HALF OF THE EQUATION

I found this set while killing some time during one of my brother’s rehearsals. Obviously, I got it from Toys R Us, it being an exclusive and all. I did participate in the vote on this one, and three of the four I voted for are in the final set, so I guess that’s cool. Unfortunately, Ronan, the one I wanted the most, lost out to Thane, which is a bummer. Guess I’ll have to wait for TRU 19. All in all it’s a pretty good set. Cap and Hulk are fun variants and Thanos offers some nice improvements to the last one. Thane is good on a technical level, but sadly neither the character nor his design is particularly exciting.  But hey, three out of four ain’t bad!

#0414: Ms. Marvel, Captain America, & Radioactive Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , ,

MS. MARVEL, CAPTAIN AMERICA, & RADIOACTIVE MAN

MARVEL LEGENDS INFINITE SERIES

Okay, last day of Marvel Legends reviews this round. But, we’re going out with a bang. Not one, not two, but THREE (count ‘em THREE!) figures this time. Target is doing something of a push for more business in their action figure department, so they’ve just started carrying exclusive sets from Hasbro’s Marvel Legends Infinite Series and Star Wars: the Black Series lines, as well as Playmates’ Teenage Mutant Ninja Turtles line. I just got the Marvel set, so let’s see how that turned out.

THE FIGURES THEMSELVES

Ms. Marvel, Captain America, and Radioactive Man are part of the exclusive Marvel Legends Infinite Series three-pack currently for sale at Target. Radioactive Man was previously slated for a regular release in the Marvel Legends line before the move to the Infinite Series branding, but he ended up getting cancelled. It’s nice to see him find a place here.

MS. MARVEL

“When her human DNA fused with that of the mighty Kree warrior Mar-Vell, Carol Danvers became the superhuman Ms. Marvel.” This is the star attraction of the set for a lot of people. It’s understandable, given that the character hasn’t seen a figure in this scale since way back in the Toybiz days. That’s a pretty dated figure, and near impossible to find, at that, so a new figure is a great move. The figure is about 6 inches tall and she features 29 points of articulation. She’s depicted here in her second costume, designed by the late Dave Cockrum. It’s generally the design she’s most associated with, and it’s probably one of the better ones. Ms. Marvel’s sculpt is head-to-toe identical to that of the Moonstone figure from the Thunderbolts boxed set. Generally, a complete re-use for a separate character doesn’t work out for the best, but Ms. Marvel and Moonstone have generally been rather similar in looks, so a little bit of paint is enough to make it work. It’s a pretty solid sculpt, with good proportions and movement. In addition to the Moonstone pieces, Ms. Marvel’s also been given a sash add-on, which actually does a nice job hiding the flatness of the lower torso. That was the only real issue with the original sculpt, so it makes the figure even better. The paintwork is, obviously, key on this figure, and for once Hasbro really made it work. Everything is really clean, and all the details are nice and sharp. The gold on the logo in particular looks really nice. About the only issue with the paint is the decision to have the exposed skin go up quite so high on the hips. If the costume came down a bit further, the articulation would be pretty well hidden, but as it is they look a bit unsightly. Ms. Marvel included no accessories, but apart from maybe an energy blast or something, there’s not much that would make sense.

CAPTAIN AMERICA

“Science made Steve Rogers a super-soldier with extraordinary speed, agility, strength, and durability, but it’s his heart that makes him Captain America.” Cap here is kind of the requisite heavy hitter of the set. It’s highly unlikely he’ll have much pull for the set’s intended audience, but he’s kind of unavoidable. The figure is about 6 inches tall and he has 32 points of articulation. He’s something of an amalgam of Cap’s various looks over the years. The strongest influence seems to be from the Ultimate universe version of the character, but the color palate is more classically inspired, and the painted on head wings are from the most recent incarnations of the costume. The end result is actually not bad. Like the design, the figure’s pieces are also something of an amalgam of previous figures. Most of the figure is re-used from the most recent Ultimate Cap (Which it should be noted took a lot of its parts from the ML Face-Off version of Punisher). The only pieces not from that figure are the right thigh, which is from the X-Men Marvel Legends Infinite Series Magneto, and the shoulder strap, which is from the ML Commander Rogers figure. The body is a little dated in comparison to some of the more recent stuff, but it’s not terrible. The add-on shoulder strap and belt pieces do a lot to mask some of the flaws, allowing it to serve as a decent mid-way point between the body like we saw on Carnage and the one used for Radioactive Man. I’m still not 100% sold on the head, but it could be worse. It’s just a bit too mean looking. The figure’s paint is pretty solid. Everything is pretty clean. I dig the boldness of the blue. The stars on the shoulders present a bit of an issue with posing, as moving the shoulders causes them to be a bit misaligned. Cap includes his mighty shield and an extra unmasked head. The shield is the same one we’ve seen a few times. It’s a good piece, plus it can be placed on his back, which is cool. The head is a re-use from Commander Rogers. It has a lot of the same issues as the regular head, but at least it matches.

RADIOACTIVE MAN

“A nuclear physicist with his eye on taking over the world, Dr. Chen Lu transformed himself into the walking atomic meltdown known as Radioactive Man.” Not to be confused with the Simpsons character of the same name. Radioactive Man is probably one of the primary reasons for this set’s existence, since I imagine Hasbro didn’t want the sculpt going to waste. The figure is about 6 ½ inches tall and he features 32 points of articulation. He’s based on Radioactive Man’s classic appearance, which is one of my favorites, as goofy as it is. Radioactive Man’s a big guy, and as such he’s built on Hasbro’s new bulky body, which I believe was first used for Hyperion. It’s a pretty good body, especially for larger characters, although the neck might be just a tad too far back. Still, it’s well-proportioned and poses well. Not much else you can ask for. Radioactive Man’s also got a brand new head and an add-on piece for his, uh, skirt. The head is pretty decent, though Hasbro’s male heads are starting to look a bit repetitive. Too many similar features, I guess. The skirt piece is nice, though it can end up being a bit restricting in some poses. Radioactive Man’s paint is pretty decent, if a bit sparse. For the most part he’s molded in translucent green, which is definitely cool. The skirt and boots are molded in s darker, solid green, and the torso’s painted to match. The logo on the chest is clean, which is good. I would have liked it to be more of a yellow, but it looks fine. The only other details are his eyes, which are just simple white. Unfortunately, the left eye on mine is out of place, but it’s not too noticeable. Radioactive Man includes no accessories.

THE ME HALF OF THE EQUATION

Unsurprising for a set that is exclusive to the store, I picked these three up from Target. My brother and I had gone to pick up Lego Batman 3 (which is awesome by the way), and I happened to find this set as well. As luck would have it, I had exactly the right amount of cash on hand to get both. Sure, I don’t really need another Captain America, but this one’s inoffensive and the other two more than make the purchase worth it. Plus, Radioactive Man. How can you say no to Radioactive Man? You just can’t!

#0385: Spider-Man – Spider Sense & Captain America – Marvel Now

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPIDER-MAN – SPIDER SENSE & CAPTAIN AMERICA – MARVEL NOW

MARVEL MINIMATES

The point of the Best Of Marvel Minimates line is to keep basic versions of Marvel’s heavy hitters in circulation. However, Marvel’s characters, more so than DC’s, have a tendency to change up their designs, leaving a few different options as to what is their “basic” look. So, Diamond Select Toys has decided to take advantage of this to have a few more A-List figures in the line. Today’s set, Spider-Man and Captain America, are a prime example of this.

THE FIGURES THEMSELVES

These two were released as a two-pack in the third series of the Best Of sub-set of Marvel Minimates. Both figures in this set are the second version of their respective characters in the Best Of line.

SPIDER-MAN – SPIDER SENSE

Spider-Man is arguably Marvel’s best known hero, so it’s not surprising to see him pop up again. One of the things about Spider-Man is that, while he’s pretty much had the same costume for most of his career, there’s been a fair number of minor tweaks and stylistic choices by different artists. The Spider-Man released in Best Of Series 1 was based on Spider-Man’s “classic” look, in the vein of artists such as John Buscema and John Romita Sr. This figure is decidedly more modern, taking its influence from Todd McFarlane’s version of the character. The figure is roughly 2 ½ inches tall and features 14 points of articulation. The figure uses the basic Minimate body, with one addition: his spider sense piece. The piece was previously seen on the Spider-Sense Spider-Man in the 13th TRU exclusive series. It’s a decent approximation of the effect used in the comic (though my girlfriend says it makes it look like his head’s on fire), and it’s fairly well sculpted. Unfortunately, once it’s removed, Spidey is left with a hole in the top of his head. Not too much of an issue for long term collectors with dozens of Spider-Man heads to choose from, but certainly an issue for someone who gets this as their first Spidey. Like so many Spider-Man Minimates, this figure is basically a “vanilla ‘mate,” so paint is key. Spidey’s paint is okay, but not quite as good as the rest of the series. The red is a little uneven in places, and the web patterns are out of place and bunched up in a few areas. Also, the web pattern abruptly stops on the sides and backs of the wrists, legs and belt, which, while obviously intentional, is a shame. Spider-Man includes an extra head and hair (first used on Series 51’s Nova), a webline, a jumping stand, and a clear display stand.

CAPTAIN AMERICA – MARVEL NOW

Captain America’s pretty consistently had the same look over the years, but in light of the success of the movies, he’s gotten a little bit of a redesign to bring him a bit more in line with that look. The result is the Marvel Now look, which has gotten a few toys recently. This is the second time this look has been seen in Minimate form, with the first being in the 16th TRU exclusive series. The figure is about 2 ½ inches in height and features 14 points of articulation. Cap uses the standard body, with additional pieces for his helmet, gloves, and belt. All of these pieces are re-used from the first Marvel Now Cap. They were pretty great pieces there, and they’re pretty great pieces here. If there’s one thing to be said about the new costume, it’s that it translates really well to the Minimate style. The figure’s paint is fantastic. Everything is clean and evenly applied. They’ve used a lighter blue than what was used on the TRU 16 figure, and it really helps the figure pop. The detail lines are all really nicely handled, and the design has been translated expertly. The face is interesting; I like it, and I think it’s a great Cap face, but the expression seems like something that would be at home on a more classic version of the character. Still, it’s nice to get a happy expression from time to time. Cap includes his mighty shield (From the Series 40 Cap), an extra non-shield holding hand, a spare hair piece (shared by TRU 16’s Cap and Hulk), and a clear display stand.

THE ME HALF OF THE EQUATION

Spidey and Cap were picked up from Cosmic Comix, my local comicbook store. I hadn’t really planned on getting this set initially. I have plenty of Spider-Men, and I was perfectly content with the TRU 16 version of this Cap costume. However, seeing them in person, they called to me. A more modern Spider-Man’s not a bad thing to have, and the brighter palate on Cap further improves a figure I was already a pretty big fan of. Sure, these aren’t going to be for everyone, and I hope that the Best Of line doesn’t skew to modern, but this is a fun set.