Tag Archives: Hasbro

#0628: Ant-Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ANT-MAN

MARVEL LEGENDS INFINITE SERIES

AntManMovie1

Man, if you’d told me 5 years ago that I’d be sitting here today, with the theatrical release of the Ant-Man movie less than a week away, I’d have laughed in your face. I’d have probably laughed even harder if you’d told me it wasn’t just Ant-Man, but the Scott Lang Ant-Man. That’s just preposterous! I certainly would never have believed that the character would also be headlining his own series of Marvel Legends. And yet, here we are, with all those things totally happening. I couldn’t be happier. Now, I’m gonna review my mass produced action figure of Scott Lang as Ant-Man, based on the upcoming, big-budget film. Just go with it!

THE FIGURE ITSELF

AntManMovie3Ant-Man is the first figure in Hasbro’s Ant-Man Marvel Legends Infinite Series, released to coincide with the Ant-Man movie. The figure stands 6 inches tall and features 30 points of articulation. Ant-Man features an all-new sculpt, modelled, of course, on the design of the character in the film. He’s actually the only figure in the series to be based on the film’s designs, so there’s that. Of course, Scott just got a redesign in the comics that isn’t horribly far removed from the movie look (though it’s got more than a few differences), so you could easily fudge this one as being a comic figure too, if you were so inclined. The sculpt looks to do a pretty decent job of translating the movie look into plastic form. The helmet is configured with just the bottom half of his face showing, much like it looks in the comics, which is a look I haven’t actually seen in any of the film’s promotional material. It’s possible the look just hasn’t been shown, but it’s a little odd to see Hasbro go for a look that isn’t being widely promoted. Regardless, I think I might actually prefer him this way, so I don’t mind. The rest of the sculpt is pretty strong, with good proportions, and nice texturing and detail AntManMovie4work. The hands are posed in a slightly odd way, though, to Hasbro’s credit, it looks as though DST’s Marvel Select figure has pretty much the same hands. They just seem weird, and it would have been nice to get an extra pair of hands at the very least. The hands are still well-sculpted for what they are, and they’ve even got the little button that activates the shrinking. As with just about every figure produced by Hasbro these days, his only real downfall is his paint work. It’s not terrible; the colors are decent, the helmet’s got some nice weathering, and most of the paint stays within the sculpted lines. However, there’s a distracting amount of red slop on his left leg, which is really annoying. Ant-Man makes out pretty well in the accessories department; he includes miniature versions of himself, Yellow Jacket, as well as his pet ant Ant-hony (whom the miniature Ant-Man can ride). The figure also includes the head of the series’ Build-A-Figure Ultron.

THE ME HALF OF THE EQUATION

The modern collecting world is very much built on knowing what’s coming and buying as much as you can online. That can kind of take a slight bit of the excitement out of getting new stuff, since there’s not really any victorious moment of finding new stuff. For a change, I actually found almost the entirety of this series at my local Toys R Us, and I didn’t even know they were out yet! Ant-Man is a figure with a few flaws, but he’s overall pretty fun.

AntManMovie5

#0624: Yoda

Posted by Ethan Wilson in Reviews and tagged with , , , ,

YODA

STAR WARS: THE BLACK SERIES

Yoda1

After a bit of a hiatus, I’m finally getting back into Star Wars: The Black Series. It’s not really by choice or anything, it’s just that I’ve finally started finding the figures I want again. The stores around me are all still drowning in a sea of Episode III Obi-Wans, so none of them have been getting any of the new figures. So, I have to check other places, outside of my usual stops to actually find the guys I want. Fortunately, luck’s been on my side, allowing me to track down several desired figures, including today’s focus, Yoda.

THE FIGURE ITSELF

Yoda2Yoda was part of the…umm… he was released in the…hmmm. Okay, yeah, Star Wars: The Black Series has done it again. Hasbro’s releases are strange and more than a little hard to follow, so I’m never quite sure where figures actually got released. Yoda’s been given the number 06, but, in all honesty, those numbers are mostly meaningless, since a) they restarted the numbering with Series 4 and b) the numbers don’t seem to have anything to do with order of release. The TIE Pilot is #05, but I know for a fact he came after Yoda. I think Yoda might have been part of the same assortment as the Clone Sergeant, which I believe was the sixth series of figures. The figure is about 3 inches tall and has 19 points of articulation. Now, here’s where the first real issues begin to crop up. See, that’s plenty of articulation, but, for some reason, the figure’s been given double elbow joints, which seem excessive, and nothing but thigh cuts on the legs, so he can’t really do much but stand. Kind of a bummer. The figure has a brand new sculpt, which isn’t a huge surprise. It’s pretty good, overall. The head, hands, and feet all have a nice amount of detail, and the Yoda4clothes are well textured.  The arms are a little bit long, but that’s minor. Of course, most of the sculpt won’t ever be seen, due to the outer robe being done with cloth. I don’t mind the cloth robe at all. It could maybe be a little better tailored and I’m not sure how it will stand the test of time, but it’s not bad. It’s held in place by a small rubber belt, which does its job well, so that’s good. Paint is the one area where the figure (and the line, really) could stand to improve. It’s not bad, but it’s not super great either. The basic colors are fine, but the application is sloppy, and pretty much everything bleeds over. Yoda has a fairly decent selection of accessories, including his signature cane, the blissl flute and snake of the vintage figure, and a lightsaber. What’s that you say? You don’t see a lightsaber in any of the pictures? Well, that’s because goofball Ethan lost it before taking the pictures. Of course, I’m not much of a fan of Yoda having a lightsaber anyway. Plus, as what is clearly an Empire Strikes Back version of the character, the lightsaber’s really not accurate.

THE ME HALF OF THE EQUATION

So, as I mentioned in the intro, none of my main retail stops have gotten any Black Series since Series 2. This presents problems in getting anything that is after Series 2, which happens to be most of the line. With Yoda, things weren’t helped by him being the only OT figure in his assortment, and the only truly new figure as well. So, I kinda figured I wouldn’t be getting one. But, I was killing some time in a Walgreens, and I actually managed to stumble upon this guy! Ultimately, he’s just an okay figure. He won’t be winning any awards or anything. That said, he does a decent job of conveying the character, and he looks good with the rest of the line. Just don’t pay an arm and a leg for him. He’s not worth it.

Yoda3

#0623: Ultron 2.0

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ULTRON 2.0

AVENGERS: AGE OF ULTRON

Ultron2c

It’s hard to believe it’s been two months since Avengers: Age of Ultron hit theatres. Time’s just flown by, and we’ve all moved onto other movies (such as another evil robot movie…), so it’s a little surprising that so much of the film’s merchandise is still slowly making its way to stores. The second set of the 3 ¾ inch figures made their way out about a month ago, but I’m still playing a little bit of catch-up. I’ve managed to piece together a pretty decent set of figures, including the first single release of the titular antagonist, Ultron.

THE FIGURE ITSELF

Ultron2bUltron 2.0 was released in the second assortment of 3 ¾ inch Avengers: Age of Ultron figures. As the name denotes, this figure is based on Ultron’s second main appearance, more commonly referred to as Ultron Prime. I guess Hasbro just haaaaaad to be different. So, in an effort to be upfront, it should be noted that this figure is a repaint of the Ultron Prime included in the Ultron vs. Iron Man set. As such, it inherits all of that sculpts various flaws, the most pressing being that the figure stands just shy of 4 inches tall when it really should be over 5. So, he’s still really tiny. I will say that, for whatever reason, the sculpted details seem a little sharper on this figure than they did on the other. I don’t know if that’s just the lighter plastic allowing a better view or if the figure actually went through a better casting process. While I thought the sculpt was fairly accurate on first examination, another look at it shows that it’s got more than a few deviations from the source material. The head lacks the human flare of Ultron Prime, and a lot of the finer details of the armor are incorrect. Also, he has the sort of goofy, almost clown shoe like feet, instead of the toed feet from the movie. Some of it’s rather forgivable, but it’s annoying to see it be so off. Paint, or coloring at least, is what differentiates this figure from the last one. Fortunately, he’s much better overall than what we saw before. The lighter, more metallic plastic he’s been molded in looks a lot cleaner and makes the figure look more finished. He lacks the odd translucent arms, which is good for those wanting a more basic Ultron. The actual painted details aren’t much different, though he does have some extra red detailing on his torso, which is certainly nice. He includes the same accessory as his predecessor: a blast piece molded in red.

THE ME HALF OF THE EQUATION

Hey, remember when I found the Iron Legion and Scarlet Witch and decided to give the Scarlet Witch to my Dad? Yeah, this guy’s from the same purchase. Like the Iron Legion, this guy was more bought to hold me over until I could get my own Scarlet Witch. He’s really not the most thrilling figure, but at the very least he’s an improvement over the one from the three pack. Yay for me.

Ultron2

#0618: Agent Venom

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

AGENT VENOM

MARVEL LEGENDS INFINTE SERIES

AgentVenom1

Retail has become an odd place for action figures. Lots of stores are condensing their action figure section, and Toys R Us is really the only toy store game in town. But, in a time where lots of places are cutting back, Walgreens of all places has stepped up to the plate, not only carrying an increasingly wide variety of action figure lines, but also carrying their own exclusive items. Some are just simple repaints, but some are all-new, fan-demanded figures, such as Agent Venom, the subject of today’s review.

THE FIGURE ITSELF

AgentVenom2Agent Venom is a Walgreens exclusive figure, released to coincide with Series 1 of Amazing Spider-Man 2 Marvel Legends Infinite Series. The figure had previously been shown in various con displays, with no real mention of where he’d be showing up. The figure stands about 6 ¼ inches tall and sports 32 points of articulation. He is, of course, based on the initial Agent Venom design, from right after Flash Thompson took over as host to the alien symbiote. It’s admittedly one of the more unique variants of the Venom design, and it makes for a rather striking figure, so it’s a good choice for a toy. The figure uses the Face-Off Punisher body as a starting point, with a unique head, hands, knees, shins, and feet and add-ons for the body armor and belt. The body is a little outdated, in terms of both proportions and articulation. However, the Bucky Cap body would be too small and the Hyperion body would be too large, making this the best fit of the existing bodies. On the plus side, the armor covers the torso, thereby hiding some of the wonky proportions. The movement still kinda sucks, but it’s not terrible. The pieces that are new are all very well sculpted. The head is nice and simple, and the armored pieces are loaded with tons of texture. When fully assembled, the figure is the spitting image of his comicbook incarnation. The paintwork on the figure isn’t quite as impressive as the sculpt. Some of that’s to be expected; the character’s design doesn’t really equate to a lot of painted detail. He’s really just got the white accent lines running throughout. They aren’t atrocious, but they could certainly stand to be a little cleaner. Agent Venom includes two Glocks, an MP5, and a USP handgun, as well as a cool four armed symbiote attachment piece to help him hold them all.

THE ME HALF OF THE EQUATION

I actually found this figure quite a while before I got one. He was amongst the large selection of figures I found at the Walgreens near Super Awesome Girlfriend’s school while I was visiting some months back. But, there were a lot of things I wanted, and I only had so much money (and space in my bag for the plane ride home) so he got put back. Then I didn’t see one again, so I figured I’d missed my shot. A couple of weeks ago, I stopped by a somewhat out of the way Walgreens while killing time during my brother’s karate lesson. I found this guy back behind several other ML Infinite figures. Venom’s not exactly one of my favorite comicbook characters, but the Agent Venom design is actually pretty cool, and it translates incredibly well to action figure form.

AgentVenom3

#0599: TIE Fighter Pilot

Posted by Ethan Wilson in Reviews and tagged with , , , ,

TIE FIGHTER PILOT

STAR WARS: THE BLACK SERIES

TIEPilot1

Star Wars: The Black Series started out pretty strong, but it sort of got a little bit lost for a while, with weird case packouts and a few questionable character version choices. However, it seems like things have picked up a little bit in more recent assortments.  I’ve been starting to find new figures at a more steady pace, which is always a good thing! Let’s have a look at one of the line’s more recent additions, the TIE Fighter Pilot!

THE FIGURE ITSELF

TIEPilot2The TIE Fighter Pilot is part of …ummm….Series 5(?) of Star Wars: The Black Series. I think that’s just means it was the fifth series of the 2014-2015 segment of the line. Hasbro likes to confuse people that way. He’s marked #005 on the package; I think that places him in the second round of numbering, though it would seem he’s been released out of sequence. The figure is just over 6 inches tall and features 28 points of articulation. The TIE Pilot is based on his appearance from A New Hope. The sculpt is mostly new, which actually surprised me a bit. At first glance, I assumed that the TIE Pilot was making use of Pilot Luke’s body. However, upon closer examination, the only pieces they share are the left hand, and the hips. Some of the other parts are similar, but the TIE Pilot is taller than Luke, and the proportions have been tweaked to match. The star piece here is definitely the head sculpt. It’s got a lot in common with the Stormtrooper, but it’s all new. The details are nice and crisp, and everything is properly symmetrical. It looks pretty much like a miniaturized version of the real thing. Paint on the TIE Pilot is on the light side, but what’s there is quite well handled. He’s got the proper Imperial emblems on his shoulders and helmet, which are nice and clean. Also, the figure may be all black, but he’s got matte and shiny finishes on various parts of the uniform, which adds a nice level of realism. The TIE Pilot is also a bit light on accessories, including only a basic Stormtrooper rifle. However, given that the Pilot’s spend most of their time in the TIE Fighters, there aren’t really a lot of accessory options, so I guess it’s forgivable.

THE ME HALF OF THE EQUATION

The TIE Pilot is another addition to my collection courtesy of Super Awesome Girlfriend. We needed to pick up a few things from Wegman’s, and, as I’m prone to do, I wandered over to their small toy aisle, where I found this guy. Since she felt bad for dragging me along on a run to the grocery store, Super Awesome Girlfriend decided to buy the figure for me. Because, as I’ve noted many, many times before, she’s waaaaaaaaaay too supportive of this whole collecting thing. The TIE Fighter is a fun addition to the Black Series line-up, and I’m happy to have one.

TIEPilot4

#0597: Iron Legion

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

IRON LEGION

AVENGERS: AGE OF ULTRON

IronLegion1

It seems that not everyone agrees, but I thought that Avengers: Age of Ultron was a pretty fantastic movie. I was thoroughly entertained from start to finish, and after having seen it five times, I feel it really holds up to repeat viewings. For me, perhaps the most disappointing piece of the movie experience has been the rather light offering of movie-based action figures. Hasbro’s offerings in particular seem to be missing several key pieces of what made me love the movie just as much as I did. Interestingly enough, more than one line of figures is placing a decent-sized focus on the Iron Legion, who ultimately have a minor role in the film. But, hey, new toys is new toys, so I got one.

THE FIGURE ITSELF

IronLegion2The Iron Legion figure is part of the second series of Hasbro’s 3 ¾ inch line of Avengers: Age of Ultron figures. The figure stands roughly 3 ¾ inches tall (not a huge shocker there) and has 5 points of articulation. It’s disappointing that Hasbro’s decided to switch to the lower articulation count, but I guess it’s, at the very least, consistent. The Iron Legion figure appears to be an all-new sculpt. It does a nice enough job of translating the movie’s design to the smaller format. The proportions are all pretty good, and the details seem to be well-placed. The sculpt is a little on the soft side in terms of details, but it’s about on par with the rest of the line. Overall, not a bad sculpt. Paint? That’s a different story. Hasbro desperately needs to work on the paint on their figures. It’s consistently their downfall. First of all, this guy is missing more than a few details. The blue is only applied to about half of the places it should be. Also, while they’ve chosen the red accent color (which I think belonged to either 03 or 05, depending on which one of those was Ultron Mk 1), they haven’t actually put in a number or done any of the detailing outside of a small section of the torso. The worst thing is that, with the exception of the small bit of red, all of the paint is very sloppily applied, with fuzzy edges, bleed over, inconsistent coverage, and splats of paint where there shouldn’t be. It’s an incredibly messy figure. The Iron Legion’s one accessory is some sort of an energy blade clip-on. Not really sure what it’s supposed to be, but I don’t think it was in the movie. At least it’s not a missile launcher…

THE ME HALF OF THE EQUATION

Getting the Iron Legion was sort of bittersweet. I found him along with an entire case of Series 2 figures, which is really great. However, the figure I wanted most, Scarlet Witch, is only packed one per case (which is super dumb). My Dad really wanted one (he’s a long-time Scarlet Witch fan) so the single Witch I found went to him. So, I got this guy and an Ultron to hold myself over until I can get a Scarlet Witch for myself. The trouble is, he’s not particularly well done, nor is he a figure I was desperate to own, so my opinion of him is rather “meh.”

#0580: Chewbacca

Posted by Ethan Wilson in Reviews and tagged with , , ,

CHEWBACCA

STAR WARS: THE BLACK SERIES

Chewbacca1

Once a line of figures gets a few series in, there will inevitably crop up one or two characters that are noticeably absent. Following the first three series of Star Wars: The Black Series, it was quite obvious that these two characters were Darth Vader and Chewbacca. Then, both found their way into the 5th series of the line. And there was much rejoicing! Yay! Except for one small issue: they weren’t exactly easy to find. See, there were two things that led to this. The first was that stores were sitting on lots of unsold stock of the first four series, so they under-ordered Series 5. In addition, while the series was all new figures, two of the four were variants of previously released characters. Obviously, this made the two new characters even more desirable, causing quite a bit of scarcity. I myself missed out on Chewbacca the first time around, but, fortunately for me, he got a rerelease!

THE FIGURE ITSELF

Chewbacca2Chewbacca was originally part of Series 5 of Star Wars: The Black Series, however he eventually found his way into Series 7 cases as well. He’s figure number 04 in the second round of numbering for the line. The figure has 27 points of articulation and stands a whopping 8 inches tall. He’s actually so tall that he was pushed back to Series 5 from Series 4 so that Hasbro would have time to re-design the packaging so that poor Chewy wouldn’t have to be crammed in some contorted pose in order to be properly seen. Dude’s really big.  Chewbacca is one of the handful of characters who essentially look the same in all of the Star Wars films they appear in. That being said, you can sort of tell which movie he’s from by what his “bangs” are doing. For this figure, they’ve gone with the slicked back A New Hope look, which works fine with me. Given Chewbacca’s unique look, it’s no surprise that he makes use of an entirely new set of sculpted pieces. To be totally honest, it isn’t one of my favorites that the line has produced. It’s certainly not bad, and in fact, they’ve done an admirable job of translating a design that doesn’t work very well on an articulated figure to…umm…an articulated figure. The fur is all pretty well textured, but the breaks for articulation are rather obvious and obtrusive. Not sure it could have been any better, but it looks off. The head was actually the part of the figure I liked the least at first, but my opinion has changed over time and now I think it might be my favorite part of the figure. I’m still not 100% sold on the decision for the mouth to be open, but it looks perfectly fine in person. The sculpt being a little on the wonky side is not at all helped by an iffy paint job. Now, to be fair, this paint isn’t poorly applied or messy. It’s all exactly where it should be. It’s just not as…subtle as it could be. There are two different shades of brown: one dark and one light. The problem is that there’s no shade between, so the change from one to another is rather sudden. It really doesn’t help that many of these changes occur at the connections of joints, which are already a bit jarring to begin with. Chewbacca is armed only with his trusty bowcaster. It might have been nice to get another Stormtrooper rifle or maybe a set of handcuffs, but the lighter accessory load is excusable given the figure’s size.

THE ME HALF OF THE EQUATION

When Series 5 was announced, I knew I wanted to get a Chewbacca figure. However, when I ended up finding the series, I could only find Luke and Vader, with no sign of Chewbacca. That bummed me out quite a bit. I mentioned it to my dad, who kept an eye out for Chewbacca for several months. He finally came across one while getting lunch from Wegman’s one day, much to my excitement. I know I was a little down on this guy in my actual review. I stand by that, but I will say that just having the figure in hand improves my personal opinion of the figure, even if the actual quality could be a bit better. I think part of it is just that Chewy is an important piece of the films and a collection wouldn’t be complete without him.

Chewbacca4

#0579: Bossk

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BOSSK

STAR WARS: THE BLACK SERIES

Bossk1

After going a fair bit of time with no new Black Series figures, I’ve actually managed to pick up a few of them in a relatively short span of time. And, as an added bonus, I didn’t actually have to resort to breaking my “no prequel figures” rule again. Yay? Empire Strikes Back is a lot of people’s favorite film of the original trilogy, due in no small part to the introduction of a rather memorable selection of bounty hunters. Now, they certainly can’t all be Boba Fett when it comes to popularity, but today’s focus, Bossk, is certainly up there.

THE FIGURE ITSELF

Bossk2Bossk was released as part of Series 7 of Star Wars: The Black Series. He’s figure number 10 in the line, though it is important to note that he’s number 10 of the second batch of numbers. Because Hasbro enjoys confusing people. The figure stands just over 6 inches in height and sports 30 points of articulation. His jaw moves, guys. His jaw moves. That’s pretty cool. Bossk features a sculpt that is all-new to this figure. Simply put, the sculpt is nothing short of amazing. The design from the movies has been translated quite nicely. The figure is also just covered in texturing, which makes him quite interesting to look at and shows that Hasbro definitely didn’t phone things in on this guy. Bossk’s paintwork is decent, though not quite up to par with the sculpt. This is Hasbro we’re dealing with here. On the plus side, the base color work is all very well-matched to the film look, and the colors are nice and clean. He also has a nice wash over his head, hands, and feet, which really brings out the smaller details of the sculpt. So, what’s the bad with the paint? Well, you’d be hard-pressed to find an edge on this figure that doesn’t have any bleed over, and you’d be just as hard-pressed to find a surface devoid of any stray marks of incorrect colors. From a few feet away, it’s hardly noticeable, but up close, the figure looks pretty rough. Not terrible, but rough. Bossk’s lone accessory is his blaster rifle. It’s a little difficult to get into his hands, but it’s well sculpted, and once it’s in place it looks great.

THE ME HALF OF THE EQUATION

Bossk was purchased for me by my Dad. He was grabbing lunch at Wegman’s of all places and they had a case of this series. Here I was sitting in Political Science and in comes a text asking if I want Bossk and Chewbacca. Bossk was something of a slow-burn figure for me. I knew I wanted to see him made when the line began, and I was certainly happy to see the prototype, but I just never got really excited about him. That did change a little, but not as much as I would have hoped. The figure probably has the best sculpt in the line so far, but he’s really pulled back by the less than stellar paint. I really wish that Hasbro would put some more work into the paint on their figures, because so many fantastic sculpts are being hidden by lackluster paint.

Bossk4

#0572: Clone Sergeant

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CLONE SERGEANT

STAR WARS: THE BLACK SERIES

CloneSWB1

It’s been a whole seven months since I’ve looked at a Star Wars: The Black Series figure. That kind of surprised me. I double-checked a few times, but, yep, Darth Vader was the last one I looked at, back on October 6th of last year. It’s odd, because I was pretty sold on this line when it launched. However, the remnants of the first few series have hung around in my area, so finding the newer figures has been few and far between. Evidently, I was so desperate to get something from the line that I was willing to break my one rule going in: No prequel figures. Yeah, bad Ethan. Just go with it, okay?

THE FIGURE ITSELF

CloneSWB2The Clone Sergeant was released as part of the sixth series of Star Wars: The Black Series. He’s figure #07, though it’s worth noting that the numbering restarted for 2014, so he’s a little higher in the actual numbering. The figure is roughly 6 inches tall and he has 29 points of articulation. He’s a Phase I-style Clone Trooper, which technically means he’s from Attack of the Clones, although, as I noted in my last Clone Sergeant review, I’m fairly certain the no Sergeants actually appear in that film, making this figure technically a Clone Wars figure. But I could be wrong. This being a Phase I Clone, it’s not really a surprise that the sculpt is identical to that of the Series 4 Clone Trooper, and will be the same as the soon-to-be-released Clone Lieutenant. In Hasbro’s defense, this is completely film accurate and totally to be expected. The additional Clone ranks are here to get more use out of the completely unique tooling of the first Clone. It’s worth noting that this sculpt is a really great piece of work. Everything is nice and clean, and there’s lots of symmetry. The armor is appropriately smooth and the underlying body suit has some wonderful texture work. There is one issue, and I’m not sure entirely how to classify it. Simply put, the figure has a rather obvious set of serial numbers etched into his left thigh. Well, I say etched, but they almost look as if someone chewed them in. It’s strange looking. Clearly, this isn’t meant to be part of the sculpt, but it’s there and it’s rather distracting. The paint is somewhat important on this figure, since it is the one thing that differentiates it from the normal Clone Trooper. It’s okay, but not great. The colors are well chosen, and everything is pretty much correctly placed, but the green areas in particular are rather rough around the edges, looking almost as if the green hasn’t been fully mixed together. It’s only really noticeable up close, but it certainly could be better. The Clone Sergeant is packed with two rifles: one large and one small. These are the same ones included with the normal Trooper, and they are nice translations of the film designs.

THE ME HALF OF THE EQUATION

It’s kind of Super Awesome Girlfriend’s fault. See, I was visiting her at school and we went to Toys R Us, because that’s what we do, and they had this figure there. I’ve been resisting the urge to buy a Black Series Clone Trooper for a while now, and so far I’ve managed to do pretty well. But she was standing there with me and she said three words that meant I couldn’t turn the figure down: “It has green!” Damn. So, I bought the Clone Sergeant. And now I totally have a prequel figure, even though I swore I wouldn’t buy any. To be fair, he’s a decent figure. Sure, the paint could be better, but that’s hardly a surprise when dealing with Hasbro. So, has this figure shattered the glass wall preventing me from buying prequel stuff? Will I be tracking down a Darth Maul on eBay? Nah, probably not. He’s cool and all, but I don’t see this being anything but a one off.

#0564: Return of the Jedi Digital Release Commemorative Set

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

BOBA FETT, BIKER SCOUT, WICKET W WARRICK, & LUKE SKYWALKER

STAR WARS: DIGITAL RELEASE COMMEMORATIVE COLLECTION JediDigital1 Happy Star Wars Day everyb—oh, wait, sorry, I already did that last week. Well, hey, why not have this Star Wars-themed review anyway, just because? So, the Star Wars movies have finally been released digitally! Provided you don’t count the DVDs, Blu Rays, and Laserdiscs as “digital.” I guess you could say that they’ve finally been released in a fully digital format, or something like that. Of course, it’s still the same re-cuts of the original trilogy that they’ve been pushing for a while, so it’s not like there’s much new to celebrate. But Hasbro wanted to celebrate, so dammit they’re gonna celebrate. Being a toy company, they celebrated with the release of TOYS! Shocking, I know.

THE FIGURES THEMSELVES

These four were released as part of the Return of the Jedi-themed boxed set, which was one of the six sets that make up the Star Wars: Digital Release Commemorative Collection. Try saying that name five times fast.

BOBA FETT

JediDigital2Everyone’s most favoritest bounty hunter, Boba Fett! Making figures of this dude is like printing money (it ruins the economy?), so it’s no surprise that Hasbro managed to find him a spot in one of the sets. Boba stands roughly 3 ¾ inches in height and features … 5 points of articulation. Yeah, this is one of Hasbro’s articulation-lite sets. Structurally, Fett is the same as the single release Boba from last year’s Star Wars Rebels Saga Legends and his two-pack release in the Mission Series. It’s not a bad sculpt; the proportions are all pretty good and there’s plenty of texturing and detailing. It would kind of be nice if his right arm was either fully pre-posed so that he could hold his blaster properly or not pre-posed at all; as it stands, he looks like he’s been caught mid-arm lift or something. That aside, the sculpt is generally pretty strong, and one can hardly blame the re-use here. Fett has what is probably the most complex paintjob of the set, and it’s all petty cleanly applied, which is good. It’s worth noting that he’s actually features his color scheme from Empire, not from Jedi. I guess they wanted him to fit with the other bounty hunters from the Empire set. Fett includes a blaster which can be held in either hand, albeit rather awkwardly.

BIKER SCOUT

JediDigital3The Biker Scouts were one of two additions to the Star Wars universe brought on by Jedi’s Endor battle. I’ll get to the other shortly. Height and articulation is pretty much identical to that of Boba Fett, so it’s consistent, I guess. The sculpt is a re-use of the Mission Series two-pack version of the character. It’s actually a pretty strong sculpt. The proportions are all about what they should be, and, best of all, he doesn’t have the weird arm pose thing that Boba’s got going on. Really, this figure feels really similar to the vintage Biker Scout. He’s got a greater level of detail and texture work, but they do give off a the same kind of vibe. The paintwork is fairly straightforward on this guy. He’s molded in all white, with black and a little bit of grey paint. Most of It’s pretty clean, although there are a few spots of bleed over. The Biker Scout includes a small pistol, which he can hold in either hand, or stow in his leg holster, should you so choose.

WICKET W WARRICK JediDigital5

Here’s the other addition from the Endor battle. Yes, Ewoks, those divisive little so-and-sos. Wicket was kind of the central Ewok, being the one that rescues Leia and all, so he earned his spot in this set. It’s worth noting that he’s given the last name “Warrick,” after his actor Warwick Davis, who played him in the movie. That’s a nice touch. Wicket is about 2 inches tall, with only 4 points of articulation instead of the 5 the others have. Wicket’s sculpt was previously used as part of the same Mission Series two-pack as the Biker Scout at which we just looked. It’s a pretty great sculpt. There’s a lot of texture, and it’s a pretty straight re-creation of the movie character. The head covering is a separate piece, which, although it’s not removable, does help to add some depth to the sculpt. Wicket has a paintjob to match the sculpt. It’s not as detailed as some of the larger Star Wars figures, but there’s still some decent work, and everything is clean and well applied. Wicket is armed with a spear which is taller than he is. Talk about compensating.

LUKE SKYWALKER

JediDigital4Last up, there’s this other guy. He’s sort of important to the movie, I guess. It’s not like he’s the main hero or anything. *ahem* Anyway, Luke is about 3 ¾ inches tall and he has those magical 5 points of articulation. Luke is based on his look from the end of Jedi, which, to be fair, is only slightly different from his look in the rest of Jedi. This whole sculpt has been seen before as part of the Star Wars Rebels Saga Legends line. Right up front, this is probably the strongest sculpt in the set. It has some great proportions, great texturing, and great detailing. The pose they’ve chosen is just far enough away from standing straight up and down that it’s still interesting, but not so much that he looks weird. In addition, he’s the only figure in the set with any sort of likeness work on the head. It’s not a perfect match, but there’s definitely some Mark Hamill in that sculpt. He goes lighter on the paint, being mostly molded in black, but the work on the face is cleaner than a lot of Hasbro faces, and the other painted areas manage to not suck, which is always good. Luke includes his lightsaber from the film, and just about the only downside of the figure is that he can’t hold his saber in both hands.

THE ME HALF OF THE EQUATION

These four were bought for me by my always incredibly supportive Super Awesome Girlfriend. We stopped at a Toys R Us while I was down visiting her a few weeks ago, and I saw this set. I found a few other things I wanted, so I wasn’t sure I would get this one. Super Awesome Girlfriend was having none of that, and insisted on buying it for me. This is a set made up completely of re-issues, however, since I didn’t have any of the originals, that doesn’t bug me too much. Luke and Wicket are the strongest figures in the set and the Biker Scout is a pretty great figure too. Boba isn’t as good as the others, but he’s not terrible, and he’s Boba Fett, so… you have to like him, I guess. You could do a lot worse with $20 than get this set.