Tag Archives: Hasbro

#3500: Ben Kenobi – Tibidon Station

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BEN KENOBI — TIBIDON STATION

STAR WARS: THE BLACK SERIES (HASBRO)

“Obi-Wan Kenobi is set years after the dramatic events of Star Wars: Revenge Of The Sith wehre Kenobi faced the corruption of his friend and Jedi apprentice, Anakin Skywalker turned Sith Lord Darth Vader.”

I honestly don’t know if it’s possible to praise Ewan McGreggor’s performance as Obi-Wan Kenobi enough; it’s just one of those absolute stand out things, and the very best thing about the prequels.  While his role within the films at times left him a little under-utilized, he got his own show, which gave us so much more time with the character, and that was very cool.  Thus far, I’ve been light on Black Series coverage for the show, but I’m doubling what I’ve gotten today, with Tibidon Station Ben Kenobi!

THE FIGURE ITSELF

Ben Kenobi (Tibidon Station) is is figure 6 in the Obi-Wan Kenobi sub-set of Star Wars: The Black Series‘s fourth phase.  He was a Target-exclusive release, which hit shortly after the first batch of figures from the show.  He’s based on the character’s look from early in the first episode of the show, before he settles back into his Obi-Wan ways to rescue Leia.  It’s a more unique look for the character, who otherwise tends to fall into the same general trappings for design.  The figure stands 6 inches tall and he has 27 points of articulation.  The main figure is a total parts re-use from the Wandering Jedi version of the character who hit in the main line.  The two outfits aren’t *exactly* the same, but they’re certainly close enough that I can see why Hasbro would go for the re-use.  It would honestly be pretty hard to justify new parts on such a look, anyway.  The head suffers from not being the Jabiim sculpt, which…well, it’s honestly not fair to judge it that harshly.  It’s not a bad sculpt on its own merits; there’s more than a passing resemblance to McGreggor, and he’s not terribly far off from his look in the show.  He’s a touch too clean and put together, I think is the real issue.  Still, given that this one predates the other, I can’t knock it.  The major change-up for this figure is the color scheme, specifically the shirt, which is now a lovely shade of blue.  It looks quite spiffy, and makes him suitably different from the main release.  To further differentiate him, he also gets a new cloak piece, as well as an all-new back-pack, both based on his stuff from the scenes with this look.  And, he’s also still sporting his blaster and lightsaber, just like the other one.

THE ME HALF OF THE EQUATION

I dug this look on the show, even though it was rather short-lived, and I dug it as a figure.  But, it was a Target exclusive, and I wasn’t going hunting.  Then I found it, but it was when all the other Black Series exclusives got marked way down, and I didn’t want to pay full price, so I waited, checking every so often for a few weeks, with the same figure at my local Target.  But, he sold before I could get a markdown, which is really the risk you take, I suppose.  One got traded into All Time, however, rather amusingly on the same day that I wound up buying the Jabiim figure.  He’s fun.  Not as definitive as the other release, but I do like him a lot.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3499: Agatha Harkness

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

AGATHA HARKNESS

MARVEL LEGENDS (HASBRO)

“Sorceress Agatha Harkness was rejected by her own coven long ago. In Westview, she pretends to be Wanda and the Vision’s nosy neighbor to learn more about Wanda’s powers.”

Can I just not do the “It was Agatha all along” thing?  It was clever back when the reveal happened, but it feels a bit overplayed now, right?  Cool, so I’m just not doing that.  Agatha Harkness is a character who goes pretty far back at Marvel.  She was created by Stan and Jack while they were still on FF, initially serving as governess for Franklin Richards, before eventually taking over a mentor role for Scarlet Witch, which was the role that would really stick for her.  Her introduction into the MCU changed some things, turning her from an old, decrepit woman to a middle-aged one, and also making her into an antagonistic force, in contrast to her “big good” vibes from the comics.  It was a well-received change, though, and she was certainly a break out character for WandaVision.  It makes it all the more surprising that it’s taken this long for her to finally get figure treatment.  Better late than never, though, right?

THE FIGURE ITSELF

Agatha Harkness is figure 4 in the Hydra Stomper Series of Marvel Legends.  She’s the assortment’s one and only WandaVision figure, making her the fourth in that show’s line-up as well.  She’s based on her fully witched-up look from the end of the show, which makes sense; it’s not like an Agnes figure would be the most thrilling thing.  The figure stands 6 1/4 inches tall and she has 27 points of articulation.  Most of that articulation…well, most of it might as well not be there, honestly.  The neck is largely motionless due to the hair, and the legs *are* motionless thanks to the skirt.  The arms are a bit better, but still very much limited, so in general poses are essentially variants of standing there.  Agatha’s sculpt is mostly new.  Her legs are re-used from the Phoenix body, but you’ll never see them and you’ll never pose them, so it’s kind of moot.  Beyond that, though, it’s unique.  It’s not bad.  The likeness on the head is definitely solid; you can tell who its meant to be without much prompting.  For as limiting as the rest of the sculpt may be to the articulation, it does at least look really nice.  The detailing on her outfit is quite sharp, and there’s a very nice, flow to everything, so she’ll at least look somewhat dynamic while she’s there in a fairly basic standing pose.  Her color work is pretty impressively handled, with a fair amount of accent work, to help sell the smaller details of the sculpt a bit.  There’s one spot of missing paint at the tip of one of her fingers, but otherwise everything is clean and the way it should be.  Agatha is without any accessories for herself, but she gets two heads and the rocketpack for the Hydra Stomper figure.  It’s a shame she didn’t get any magic effects, or possibly the Darkhold.  Just something, anything at all would have been nice.

THE ME HALF OF THE EQUATION

As I said in the intro, I was a bit surprised by how long it took to get this figure.  I understand her not being a right out of the gate release, but waiting this long, especially having her beat to market by Jimmy Woo, is shocking.  Ultimately, it’s not a super playable design in figure form, but it does at least look the part.  And, hey, when else are we gonna get an Agatha Harkness figure?

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3497: Talos

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

TALOS

MARVEL LEGENDS (HASBRO)

“Talos, a celebrated Skrull warrior, grapples with what it means to be a leader as he finds himself at odds with those closest to him.”

2008’s “Secret Invasion” storyline, which ran through most of the Marvel line for that year, isn’t a favorite of mine.  Coming from an era of moving from one sweeping status quo shift to the next, with no room to breath between, it represents a middle point of me growing very tired with the direction of the Marvel universe.  The MCU’s plan to adapt the crossover into a television miniseries wasn’t one that initially *thrilled* me, but they’ve made me enjoy other stories I didn’t much care for in the comics, so I was hopeful.  Unfortunately, the end results the first time I’ve truly, thoroughly disliked an MCU project from start to…well, technically not finish because I stopped watching after episode 4.  One of the things I was honestly looking forward to the most was lead Skrull Talos, who was my favorite part of Captain Marvel, getting more focus.  While Ben Mendelsohn does the best he can with the material he’s been given, and Talos’s character arc is at least one of the show’s least compromised, it’s still a little bit disappointing.  At the very least, he got an action figure out of the whole thing, so I guess that’s a consolation prize.

THE FIGURE ITSELF

Talos is figure 2 in the Hydra Stomper Series of Marvel Legends, which serves as the fourth Disney+ centered assortment of figures.  The line-up is a grab bag of characters from different shows, and Talos is one of two figures from Secret Invasion.  This is Talos’ second Legends figure, after his figure from Captain Marvel.  This one depicts him in his more relaxed civilian garb.  The figure stands 6 1/4 inches tall and he has 29 points of articulation.  He’s using a pretty basic set-up for articulation, overall, but he does notably get a ball-joint at the base of the neck, rather than one of the more typical set-ups for the line.  It’s not a bad set-up, mind you, just different.  Talos is using the jacket and arms from Jimmy Woo, but it appears that everything else is new.  It’s honestly a bit surprising.  Obviously, the head I expected to be new, but the legs are kind of the sort of thing I would have expected to see re-use on.  Not that I’m complaining.  The new head is a marked improvement on the old one; the prior figure was working from preliminary designs, while this one gets the finalized ones, including a really solid likeness of Mendelsohn under all of the prosthesis.  The figure has a second head, based on Talos’ human guise, portrayed by Mendelsohn sans make-up.  It’s another really solid likeness, putting Hasbro’s previous attempts of the actor as Krennic to shame.  The other new parts are more standardized in appearance, but work well in terms of quality.  Talos’ color work is a lot of molded colors, which works well enough.  He gets a ton of detailing on both heads, however, and they look really nice, and very lifelike.  In addition to the aforementioned alternate head, Talos also gets the same hands as the standard, but in peach to match his alternate head, as well as the right leg of the Hydra Stomper Build-A-Figure.

THE ME HALF OF THE EQUATION

Like I said in the intro, I really liked Talos in Captain Marvel, and while his figure from that movie was passable at the time, it’s not aged incredibly well.  While I didn’t care for the source material, there’s no denying that this Talos is a real improvement to the original, and just a really strong figure in his own right.  The only downside to him is that the new neck connection means that I can’t swap his heads onto the old Talos or Krennic figures to let them benefit from the improved likenesses.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3495: Luke Skywalker – Jedi Knight

Posted by Ethan Wilson in Reviews and tagged with , , , ,

LUKE SKYWALKER — JEDI KNIGHT

STAR WARS: THE BLACK SERIES (HASBRO)

Nine years and some change ago, I opened my review of Jedi Knight Luke Skywalker by remarking that my interest in The Black Series was beginning to wane.  Over 200 figures later, that does seem like it was a slightly premature assessment of things, but on the flipside, I’m feeling myself back in that boat again a little bit these days.  This time around, of course, it’s more on me than the line.  I’m just not as invested on having every character in every style anymore.  But, somewhat appropriately, I’ve been swayed by another Jedi Luke, so, I guess I’m taking a look at that one today.

THE FIGURE ITSELF

Luke Skywalker (Jedi Knight) is part of the third series of the RotJ Retro Carded Black Series figures.  While the last two assortments have been largely re-cards of older figures with just one new figure per set, this assortment is almost entirely new (albeit with one figure that’s gotten a pretty quick re-release in the main line), and Luke is included in that grouping.  We’ve had a healthy helping of Jedi Lukes in the line at this point, covering all manner of variations on his looks.  This one covers the same ground as his first Black Series, replicating his design from his battle on the Death Star II.  The figure stands just shy of 6 inches tall and he has 29 points of articulation.  This figure’s articulation is pretty much the same set-up as the Book of Boba Fett version, which is a marked improvement on the old Jedi Luke’s set-up.  Those butterfly shoulders in particular really add to the figure’s posing options.  Structurally, he’s using most of the parts from the Light Cruiser Luke, which is sensible, what with the similarities in design and all.  He loses the vest overlay piece and gets a new head sculpt, now based directly on Hamill, rather than the Mandalorian facsimile of him, as well as an adjusted chest flap folded down like during his battle with Vader, and a belt piece.  The new head sculpt is really nice, and certainly the best RotJ-era Hamill we’ve gotten at this scale.  The separate face/hair set-up works especially well this time around.  Luke’s color work is a lot of molded colors, but there’s some solid paint work on the face and hair, and the smaller details on the outfit are handled very cleanly.  Luke is packed with an alternate chest flap, fully closed up, as well as his lightsaber.  It’s kind of light, but it’s about what I’ve come to expect at standard pricing for this line.

THE ME HALF OF THE EQUATION

I didn’t intend to buy this figure.  I swear.  I had the first Jedi Luke.  I had the Jabba’s Palace version.  I had the Endor version.  I even had the Book version.  This one?  I didn’t need it.  My bases were all covered, right?  Well, apparently not.  I saw him in person, and I just couldn’t pass him up.  What can I say, I’ve got a soft spot for the look.  I’m glad I didn’t pass him up, because he’s an absolutely fantastic figure, and far and away the best version of Jedi Luke out there.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3494: Kingpin

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

KINGPIN

MARVEL LEGENDS (HASBRO)

“One of the most powerful criminal leaders in New York City, Wilson Fisk, also known as Kingpin, rules the underworld with a signature blend of cruelty and charm.”

2003’s Daredevil is not a particularly good film, but one of the things that pretty much everyone can agree worked was Michael Clark Duncan’s portrayal of Kingpin.  With his passing in 2012, there was no way for him to reprise the role, and it became a rather daunting one for the next actor to portray Wilson Fisk in live action.  Thankfully, Vincent D’Onofrio was more than up for the challenge, delivering a take on Fisk so memorable that he even became the very first of Netflix’s Marvel cast to make the jump over to the MCU proper when he appeared in Hawkeye.  And with that, he also got an action figure.  Finally!

THE FIGURE ITSELF

Kingpin is part of the Hydra Stomper Series of Marvel Legends, which is another Disney + based series of figures.  Kingpin is the one unnumbered figure in the set, as he’s sans-BAF piece.  He’s also one of the the two figures in the set based on Hawkeye.  Interestingly, he’s specifically based on his appearance in the photo at the end of Episode 5, rather than his proper appearance in Episode 6, presumably to keep him in a slightly more classic Kingpin get-up.  The figure stands about 6 1/2 inches tall and he has 30 points of articulation.  Kingpin is using a good chunk of parts from Happy, which seems pretty sensible, what with them both being larger guys in suits and all.  He gets a new head and jacket, and a modified upper torso, to remove Happy’s tie.  The head’s sporting a rather strong likeness of D’Onofrio in the role, and the new jacket and upper torso both work well to sell the whole overall look.  Kingpin’s color work is pretty decent; it’s almost entirely molded plastic colors, but they get the proper shades down, and it’s always nice to see Kingpin in his classic colors.  His face gets the printed technique, which works well here, and even gets the couple of spots on D’Onofrio’s face.  Kingpin is packed with two sets of hands, in fists and gripping, as well as his diamond-topped cane.

THE ME HALF OF THE EQUATION

I loved Netflix’s Daredevil in its entirety, and D’Onofrio’s Kingpin was certainly a big part of that.  I was happy to get Daredevil back in the one Netflix set, but I was always a little bummed there was no Kingpin to go with him.  With his reintroduction into the MCU proper, I was more hopeful, and that certainly paid off.  Kingpin is a somewhat by-the-numbers figure, but that’s really all he needed to be, and I’m happy with the end product.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3492: Ronan The Accuser

Posted by Ethan Wilson in Reviews and tagged with , , , ,

RONAN THE ACCUSER

MARVEL LEGENDS (HASBRO)

“As Supreme Public Accuser, Ronan enforces Kree justice with his cosmi-rod, the Universal Weapon, which often brings him into conflict with the space-faring races of the Marvel Universe”

The Kree, a race of aliens that got at least some degree of focus in last weekend’s The Marvels (I don’t know specifically how much, because I haven’t seen it as of this writing) made their first appearance in the comics, represented via proxy by their Kree Sentry that was destroyed by the Fantastic Four, and then in person by Ronan, their Supreme Accuser sent to learn what happened to their Sentry.  Ronan began as a purely antagonistic force, but has acquired more complex alliances over the years, at times fighting alongside many of the heroes he had previously fought.  But, at the end of the day, he remains loyal to the Kree Empire, and they’re not always the nicest, so he’s often stuck enforcing their not so nice ways.  At least he’s gotten some action figure coverage, though.

THE FIGURE ITSELF

Ronan the Accurser is an Amazon-exclusive Marvel Legends offering.  He’s at the deluxe price point, and is part of Hasbro’s small run of comics-style “Guardians of the Galaxy” exclusives, which also includes Yondu, Star-Lord, and the Drax and Moondragon two-pack.  This marks the third time Ronan’s been in the Legends line.  Thus far, we’ve had a Build-A-Figure based on a mid-00s appearance and a standalone based on his MCU figure.  This one goes for Ronan’s classic comics attire, which is by far his most prolonging, and just generally his best.  The figure stands shy of 8 inches tall and he has 28 points of articulation, plus moving shoulder pads.  Ronan uses the Warlock Series Colossus as a starting point, sharing his arms, legs, and feet with that release.  It actually makes for a pretty solid re-use; it’s not spot-on to every Ronan appearance, but it’s remarkably close, and the build is certainly correct.  The only real drawbacks are the limited elbow articulation and the visible pins, but even those are pretty minor.  He gets a new head, shoulderpads, torso, hands, and skirt piece, courtesy of sculptor Paul Harding.  They fit very nicely with the pre-existing parts, and are a strong recreation of his classic design.  He opts for a more general classic design, rather than going for one particular artist’s rendition.  Overall, it’s just a very clean assembly, which fits very well with the character.  His color work is likewise very clean.  He’s got a lot of greens, as you would expect.  The lightest green is metallic, while the others are flat.  The application’s all pretty cleanly handled, with minimal slop and bleed over.  Ronan’s only got one accessory, but it’s a very good one, because it’s his cosmi-rod, aka his real big hammer.  It’s an all-new sculpt, and it’s quite a sizable piece at that.  The angles are nice and sharp, and there’s some impressive texturing on the head.

THE ME HALF OF THE EQUATION

I’ve always liked Ronan, but he’s always had a shortage of good figures.  I never was able to complete his Build-A-Figure back in the day, which was honestly one of those better in the end type deals, since it wasn’t really the look I wanted anyway.  I’ve made due with the movie version for a while, which is honestly fine, because that one’s pretty good.  But, it doesn’t remove my desire for a good classic one.  I intended to get around to ordering this one eventually, but Amazon made it easier for me by giving him a good chunk of a mark down for Prime Day.  I’m glad I got around to that, because he’s actually a really, really good figure.  Certainly the best version of Ronan out there.

#3490: ARC Trooper Fives

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

ARC TROOPER FIVES

STAR WARS: THE BLACK SERIES (HASBRO)

“Fives trained with Domino Squad on Kamino before being stationed at the Rishi Moon outpost. While on Kamino for medical testing, he discovered a terrifying secret about the clones’ origins.”

There are a number of recurring Clones over the course of The Clone Wars, but there are few that have quite as intricate a story as Domino Squad.  Introduced during the first season episode “Rookies,” the squad’s members are noted for their tendency to, much like the game pieces they are named after, fall.  By the end of their first episode, only two remained, Fives and Echo, who would go on to go from Rookies to ARC Troopers during their run on the show.  Fives initially had the longest run of the squad, surviving until the end of the Clone Conspiracy arc, where he discovers the truth about Order 66.  He’s subsequently had his thunder stolen a little bit with the reveal that Echo actually survived his presumed death at the Citadel, but that doesn’t make Fives any less important.

THE FIGURE ITSELF

ARC Trooper Fives is number 16 in the Clone Wars sub-set of Star Wars: The Black Series’ Phase IV run.  Like Jesse from last week, he’s a Walmart-exclusive, which continues to be a bit of a bummer.  Honestly, even more of a bummer, really, given how major a character Fives is within the context of Clone Wars.  Like Echo and Jesse, Fives is presented here in his ARC Trooper loadout.  It makes the most sense by far for him, since he spends so much time in this particular gear.  The figure stands 6 1/4 inches tall and he has 29 points of articulation.  If you’ve read my reviews of Echo and Jesse, then you pretty much know the ins and outs of this sculpt, because he’s virtually identical to those two.  Fives shares the upper pouch placement with Jesse, which is accurate to the source material.  He also gets a new head sculpt under the helmet, which is fairly similar to Echo’s, but sports the appropriate facial hair.  I kind of expected the beard to just be painted on, but it’s actually sculpted, which was certainly a plus.  Fives’ color scheme is accurate to the cartoon, so it’s got a similar vibe to the other two, but some of the patterns are shifted around in order to make him more clearly unique from the other two.  Application is generally pretty clean, but on mine, the blue on the helmet fin is a little off-set, so it’s not quite centered the way it should be.  Like Jesse, Fives is only packed with a pair of blaster pistols.  It’s again pretty frustrating, given that he *still* doesn’t have trigger fingers on both hands, but he was at least more frequently seen with just the pistols.  Still, I’d like to at least have the option, given how much re-use he’s sporting.

THE ME HALF OF THE EQUATION

I’m honestly shocked it took as long as it did for Fives to get added to Black Series.  I kind of expected him to be the one that debuted this mold, so Echo and Jesse both beating him to market was definitely odd.  I was definitely not thrilled to find out he was an exclusive, either, but thankfully, I had Max looking out for me, and he managed to snag me one without much issue.  He feels a touch anticlimactic, I suppose, having already gotten the others and all, but I’m glad I at least have him finally.

#3489: Black Knight & Sersi

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BLACK KNIGHT & SERSI

MARVEL LEGENDS (HASBRO)

“Fearful that Sersi is going mad because of her immortality, the Eternals bond her with her fellow Avenger Dane Whitman, the Black Knight, forging a mental union to make them soulmates”

In the ’90s, it was an unwritten rule in comics that everything was cooler with leather jackets.  Honestly, you can drop “in comics” from that sentence.  Leather jackets were really just everywhere.  Jim Lee notably gave a few of the X-Men leather jackets to wear over their spandex suits (which was honestly following up on Animal Man wearing a jacket during Grant Morrison’s run on that book, but that was actually a *denim* jacket, so it’s not quite the same), and it caught like wildfire.  Soon, all the Marvel teams had them, and that included the Avengers.  It’s not a time that’s jumped back to too much in toy form, but, you know what?  Here it is.  Let’s look at Black Knight and Sersi, shall we?

THE FIGURES THEMSELVES

Black Knight and Sersi are an Amazon-exclusive Marvel Legends, released under the wider “Beyond Earth’s Mightiest” banner that’s celebrating the Avengers 60th anniversary this year.  Both figures in this set are based on their time with the Avengers in the early ’90s.

BLACK KNIGHT

We got a classic comics Black Knight not too terribly long ago, back in the Cull Obsidian Series in 2018, but I’m never one to shy away from another.  This one’s like that one, but with a leather jacket.  And how could you not love that?  The figure stands about 6 1/4 inches tall and he has 32 points of articulation.  Like the last Black Knight, this one’s construction is largely Bucky Cap-adjacent.  He uses the pelvis piece, and a bunch of other parts used in conjunction with other Bucky Cap parts elsewhere.  Specifically, he’s got the more modern head from the last Black Knight, the arms from Cannonball, the torso from Doctor Strange, the belt from Daredevil, the legs from Hobgoblin, and a new jacket and boots.  The mix of parts is a pretty pitch-perfect recreation of his look from the comics, with the new parts in particular really selling the whole thing.  There’s some slight quirks to some of the older parts, with the legs in particular showing a degree of warping.  Black Knight’s color work is similar to his last release, but has a degree more polish to it.  The face is now printed, which adds an extra lifelike quality, as well as giving him his ’90s era stubble, and the rest of the line-work is just overall a bit cleaner.  Black Knight is packed with two sets of hands (fists and gripping), and his Neural sword, which replaced the Ebony Blade during this era of the comics.

SERSI

While Sersi’s gotten the Legends treatment before, it was only her MCU incarnation.  This marks the first time for her comics counterpart, and indeed the first comics Eternal in general.  It’s really not that surprising, what with Sersi always being their most notable member.  The figure stands just over 6 inches tall and she has 27 points of articulation.  Sersi uses a mix of prior figure parts, with the torso and pelvis from Shriek, the coat and upper arms from Rogue, and the lower arms and the legs of Phoenix.  She also gets a new head, belt, and kneepad pieces specifically for this release.  They’re not bad.  The head is giving me Courtney Cox vibes, which I suppose isn’t terrible for a ’90s-based figure.  Her color work is appropriate for the era, placing her in her red and black number.  The jacket is, interestingly, a different shade of brown than Dane’s jacket, and she also lacks the Avengers logo.  Consulting the source material shows that this is actually proper for this look, so, there it is, I guess.  Sersi is packed with two sets of hands (in fists and open gesture) and two effects pieces.

THE ME HALF OF THE EQUATION

I definitely dig Black Knight, and I don’t want to say no to a comics Sersi, but I wasn’t initially vibing on another Amazon exclusive, so I opted to hold out on these two.  However, the Prime Day sale has struck again.  The price made it hard to pass on them, so I didn’t.  They’re on the older side in terms of parts use, but they do what they need to, and they look pretty sweet with that ’90s Black Widow figure they put out back in 2020.

#3487: West Coast Avengers

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

IRON MAN, MOCKINGBIRD, TIGRA, SPIDER-WOMAN, & HANK PYM

MARVEL LEGENDS (HASBRO)

In 1984, Marvel decided they had too many Avengers for just one team, and split them off into two separate entities.  The original team remained in New York, while the spin-off team, the West Coast Avengers, moved out to California.  Originally launching as a 4-issue mini-series, with the original plan being to alternate issues of the main book between the main team, West Coast Avengers was a breakaway hit, and got its own standalone series, which lasted 102 issues, and frequently outshined the original book.  Despite the impact of the team, the direct acknowledgement of them in toy form has been rare.  Thus far, we’ve had a single three-pack in Marvel Universe.  But, Legends is in for some more recognition, so now we’ve got a boxed set on that side, too.

THE FIGURES THEMSELVES

Iron Man, Mockingbird, Tigra, Spider-Woman, and Hank Pym make up The West Coast Avengers box set, which is an Amazon-exclusive Marvel Legends offering.  The set is also branded under the “Beyond Earth’s Mightiest” banner, which serves as the celebration of the main team’s 60th anniversary.  Iron Man, Tigra, and Spider-Woman are all tweaks on existing figures, with Mockingbird and Hank being all-new offerings.

IRON MAN

When the WCA first got together, it was during Rhodey’s time in the classic Iron Man armor, following the fall-out of “Demon in a Bottle.”  By the time of the ongoing series, however, Tony had reclaimed the title, and was sporting his Silver Centurion armor, which is proudly showcased on the cover of the first issue.  The figure stands 6 1/2 inches tall and he has 30 points of articulation.  This guy is using the exact same mold as the Walgreens-exclusive version, which makes sense, since it’s the same armor and all.  It’s still got the visible pins on the elbows and knees, but that’s honestly pretty minor.  The notable change-up to this guy comes down to the color work.  While the Walgreens version made use of metallic silver for the silver parts of the armor, this one goes for a slightly pearlescent white.  On paper, I wasn’t so sure about it, but in person, I actually really like how it turned out.  Iron Man is packed with the same two sets of hands as his single release, as well as the smaller blast effects, in blue this time.

MOCKINGBIRD

Oh, look, it’s Mockingbird, aka the whole reason I wanted the set.  I’ve certainly never had this exact thing happen before with a West Coast Avengers boxed set…Where was I?  Oh, yeah, buying a whole boxed set for a Mockingbird figure.  As you do.  This is Mockingbird’s second time as a Marvel Legend, but the first one was decidedly more modern than what she wore during her time with the WCA.  It’s not her *first* outfit she wore with the WCA, since that version had legs on the body suit, but it’s the one she wore for the longest stretch of time with the team.  The figure stands a little over 6 inches tall and she has 29 points of articulation.  Mockingbird is using the frankensteined torso that once belonged to Phoenix, as well as the lower legs from Captain Marvel, and what might be a new set of upper legs between them?  They’re skinnier than the pinless ones that have been used in conjunction with the Phoenix body recently, but they are still pinless, so they’re not anything from before that.  It looks like they might be shared with the Moondragon figure, but I don’t have her to compare.  She definitely gets new parts for the head and arms, though.  I really like how the head in particular turned out; the separate piece for the mask works very well.  Mine has a spot of glue on the face, which I’m not a fan of, but it otherwise is a very strong sculpt.  The arms are a little odd; they kind of are bound to be, given the actual design of her sleeves in the comics was usually cheated for the page, so I think they’ve done their best with the situation.  Her paint work is pretty strong; there’s a little bit of fuzziness on the edges of the shirt, but the detailing on the face in particular is great, and I love the accenting on the hair.  Mockingbird is packed with two sets of hands (gripping and a fist/flat combo), as well as Gambit’s staff, and Netflix Daredevil’s billyclub.  It makes for a good approximation of her battle staves, and is certainly a closer representation than what we got with the last one.

TIGRA

Tigra was not only a founding member of the WCA, she also one of the team’s longer lasting members, apart from that part in the middle of the run where she, Mockingbird, and Moon Knight split off on their own.  She also got a figure very recently as part of the Retro line.  This one is…well, very similar to that one, really.  The figure stands just over 6 inches tall and she has 30 points of articulation.  She’s using almost exactly the same sculpt as the last release.  That was a really, really good sculpt, certainly one of my favorites.  There’s not much better you can do for Tigra, so I guess it makes sense that you would want to keep using it.  The only sculptural change-up is to the calmer of the two heads, which now gets a new hairpiece, which has more volume to it, better matching her ’80s appearances.  She also gets a new color scheme; the first Tigra was far too pale, while the more recent one got complaints of being too orange.  This one meets in the middle, and it works very well.  The patterning on the stripes remains the same, but her bikini is now a very dark blue, and the faces are printed, rather than strictly painted.  The faces in particular are the biggest improvement of the bunch.  Like her single-packed counterpart, Tigra gets two sets of hands, in fists and clawing poses.

SPIDER-WOMAN

Julia Carpenter’s Spider-Woman was a pretty late-stage addition to the team, first assisting them in issue #70, and officially joining in #74.  Julia Carpenter got a Legends release back during the tie-in to Far From Home, making this one seem initially as if it’s just a retread…but it’s actually not?  Yeah, I was a bit shocked by that, myself.  The figure stands 6 1/4 inches tall and she has 29 points of articulation.  Despite being the same look as the last figure, this Julia Carpenter shares exactly one piece wit her: her lower torso/pelvis, itself borrowed from the Phoenix mold.  The upper torso gave me a heck of a time ID-ing, since it’s really basic, but I eventually worked out that it was from Dagger, and it appears it hasn’t been used since.  I actually like it, since it’s without all of the odd peg holes that the Phoenix torso has picked up over the years, so it looks a lot cleaner.  She re-uses the arms and legs from Shriek, so she’s got the pinless set-up there.  She also gets a new head, with hair that better matches her earlier appearances, and a much sharper face sculpt.  The color work on this figure is very clean.  Digging the stark black and white.  I do miss the accenting on the hair, but it’s ultimately not the end of the world.  I think the current look still works.  Spider-Woman is packed with two sets of hands, in fists and open gesture.

HANK PYM

Starting with the first issue of the ongoing West Coast book, Hank Pym was a recurring supporting player for the team.  His journey back to the Avengers following his fall from grace served as a background for the rest of the characters’ antics, and slowly built him back up, until he was ready to join the team properly after 20 issues of character growth.  After four different identities, he decided to just stick to being himself, rather than going back to the costumed hero route.  He spent a lot of time in a basic red jumpsuit, which isn’t super toyetic or anything, but it’s gotten a figure just the same.  Said figure stands 6 3/4 inches tall and he has 32 points of articulation.  He would have 33 is not for the seized waist joint on my copy.  Hank makes use of re-used parts from the Red Skull jumpsuit body.  He gets a new head and torso, sculpted by Paul Harding.  The head is a solid recreation of Hank of the era, and it all fits well with the pre-existing parts.  Unfortunately, that means that the figure is a little too large, just across the board.  Hank’s just an average guy when not using the particles, so he’s about a half an inch too tall.  Hank’s color work is decent enough.  It’s very basic, but that’s expected.  The face gets printing, which is definitely cool.  Hank is includes two sets of hands, a pair in open gesture, and a fist/grip combo.

THE ME HALF OF THE EQUATION

The West Coast Avengers line-up is something I’ve been trying to build in toy form since the 5-inch days, always to limited success.  Legends has been the best spread thus far, but there were definitely some holes in the line-up.  The boxed set seems like a great idea on paper, but I’ll admit to being less than thrilled by the final line-up being 3/5ths re-releases.  So, I wound up holding off, at least until Amazon knocked 30% off of the price for Prime Day.  Mockingbird is exactly the figure I was hoping for, and hands down my favorite release of the three figures the character’s gotten.  Hank has issues with scaling, but I’m generally just glad to have this version of the character at all.  Spider-Woman was actually a pleasant surprise, as she winds up being just an across the board improvement to the older figure.  Tigra and Iron Man are both rather unnecessary, but I do kind of like these versions a little more than the prior ones.  Not so much that I really feel like they justify themselves, but what are you gonna do?

#3485: Clone Commander Jesse

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CLONE COMMANDER JESSE

STAR WARS: THE BLACK SERIES (HASBRO)

“Hard-fighting patriot Jesse proudly wears the Galactic Republic’s symbol on his helmet and as a face tattoo. After Order 66, however, his loyalty shifts from the Republic to the Emperor.”

As an interquel, Star Wars: The Clone Wars was slightly limited in what it could do to show real change and growth for its characters, especially the central characters whose fates we’ve already seen unfold. In order to keep some of that intrigue going, the show relied on the clones to really carry forward growth and development.  Clone Trooper Jesse began his run in the show as a rank and file member of the 501st, eventually graduating up to ARC Trooper, and even replacing Rex as commander of the 332nd company during the events of Order 66, in effect becoming the face of the troopers that fall that day.  That’s really not so bad a run.  And, hey, he’s also got a Black Series figure!

THE FIGURE ITSELF

Clone Commander Jesse is figure 12 in the Clone Wars sub-set of Star Wars: The Black Series’ Phase IV incarnation.  He’s a Walmart exclusive, which is less than ideal, but also not incredibly surprising, given just how much of the Clone Wars stuff has wound up with them.  Jesse is clearly based on his post-ARC Trooper promotion design, with his name signifying that he’s specifically based on the show’s finale.  The figure stands 6 1/4 inches tall and he has 29 points of articulation.  For the most part, Jesse is using the ARC Trooper tooling introduced by Echo back in 2021.  It’s a sensible re-use, what with them all having the same basic set-up to start with.  Apart from its restriction at the hips, it’s also a pretty solid sculpt as well, making its re-use totally acceptable.  He does get a new head under the helmet, showcasing Jesse’s fully shaved head, as well as a slight tweak to the body, with his ammo pouch moving from the left shoulder to the right.  The head is consistent with Echo’s in terms of styling and likeness, so they look like the same guy, but that guy isn’t necessarily Temuera Morrison.  One slight mix-up on the design is that Jesse keeps the exact same helmet mold as Echo, who had a range finder, while Jesse never did.  It’s on a peg, so you can pop it out if you’re so inclined, but it does leave a hole on that one side.  Beyond the sculpt change-ups, it’s paint work that really differentiates him.  He keeps the same basic color scheme, while changing up enough of what goes where to make him clearly a different guy.  In particular, I love how the Republic cog graffiti on the helmet and matching tattoo on the underlying head turned out.  Jesse is packed with a pair of blaster pistols…and that’s it.  Given his tendency to use larger style blasters in the show, it’s a bummer that he didn’t at least get the mid-sized blaster as well, especially with the price.  Also, he still doesn’t have a trigger finger on the left hand, so he can’t properly dual-wield the two blasters he has.

THE ME HALF OF THE EQUATION

With all the love Vintage Collection has been getting on the Clones, I was beginning to worry Black Series was going to miss out on the named guys like Jesse.  I was less than thrilled by him being an exclusive, given the VC got to be a regular release, but I was thankfully able to get some assistance getting one from someone that wound up with an extra he didn’t need.  He’s cool.  He’s definitely light on accessories, and I’m still not a fan of this whole exclusive game, but I’m glad to have him.