Tag Archives: Luke Skywalker

#3678: Luke Skywalker – Snowspeeder Prototype Edition

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE SKYWALKER — SNOWSPEEDER PROTOTYPE EDITION

STAR WARS: RETRO COLLECTION (HASBRO)

“This Luke Skywalker is inspired by the colorful prototypes that enable the development team to look past the deco and focus on the sculpt, analyze mold alignment, and adjust for quality.”

During the action figure production process, there are a number of prototyping stages.  Once the sculpt is completed and has been tooled into a steel mold for the purposes of mass-production, the molds have to be tested to make sure they work properly.  Since you don’t want to use the plastic you’ve paid to use on final production for something that may or may not work and which will effectively be junked once the mold has been confirmed as properly working, factories will run these tests with whatever plastic they have left over from other jobs, often resulting in colorful results.  Over the years, some of the test run prototypes have surfaced, and they’re a fun little quirk of the process.  And, because it’s been determined that there’s money to be made in that particular quirk, Hasbro has jumped on mass-producing them.  Thus far, we’ve gotten six of them as part of the Star Wars: Retro Collection, and I’ve finally gotten one!  Huzzah!

THE FIGURE ITSELF

Luke Skywalker (Snowspeeder) Prototype Edition is a Target-exclusive offering for the Retro Collection, as all of the Prototype Editions have been thus far.  He arrived in January of 2023, and is the fifth of the six Prototype Edition releases.  The figure stands 3 3/4 inches tall and he has 5 points of articulation.  Obviously, all of the Prototype Edition figures are re-using a mold that Hasbro’s already got in production for the main Retro Collection line, but in Luke’s case, he’s notable for being a new, actual in-house Hasbro mold, rather than a recreation of an old Kenner one.  As there were no proper Snowspeeder pilots in the vintage line, Hasbro did a sizeable rework on the X-Wing Pilot Luke from Kenner’s vintage line, bulking him a bit to add the extra padding, as well as making sure he’s got the gloves, and the modified boots.  He also brings the helmet’s visor down over his eyes, as it was more frequently seen in the movie.  For color work, these figures have no paint, instead relying on a variety of different colors for each of the body parts.  There are actually six different variations of color layouts available, with the blue, red, green, yellow, purple, and orange each being applied to a different body part depending on the variant.  This one has blue for the head, red on the torso, orange on the right arm, green on the left arm, yellow on the right leg, and purple on the left leg.  He’s packed with his lightsaber (which is molded in the same color as the head, so it’s blue here) and his grapple.

THE ME HALF OF THE EQUATION

I’ve been low-key wanting one of these since Hasbro started doing them, but not enough to really go hunting for any of them.  Likewise, I kind of wanted this mold, but also not enough to track down its original release with the board game.  This guy landed in front of me, and that made the whole thing a lot easier.  He’s very definitely a novelty, and I don’t see myself going in for any more of them (well, maybe an IG-88 if they did him), but I do like having at least one of them.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3663: Death Star Escape

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

HAN SOLO, CHEWBACCA, & LUKE SKYWALKER

STAR WARS: POWER OF THE FORCE II (KENNER)

“The Rebel Alliance has infiltrated the Galactic Empire’s most powerful battle station, the Death Star! posing as stormtroopers escorting a prisoner, Han Solo, Luke Skywalker and Chewbacca attempt a daring rescue of the captive Princess Leia. Can they escape the dreaded Death Star, or is the Rebellion about to suffer the loss of its newest heroes?”

Hey, Cinema Scenes!  It’s been a hot minute since I’ve looked at one of these!  While Kenner/Hasbro used the later run of Cinema Scenes to fill in more obscure characters from the background of specific scenes, the earliest run of the line was more about recreating distinctive scenes, often with variants of previously released figures from the line.  One of the earliest recreated scenes was the first film’s escape from the Death Star detention center, which I’m taking a look at today!

THE FIGURES THEMSELVES

The “Death Star Escape” set was the Power of the Force line’s debut Cinema Scenes set, released in 1997 as a Toys “R” Us exclusive.  As with all of the Cinema Scenes sets, in addition to the three figures, this set also included a stand, meant to look like a section of the Death Star’s floor.

HAN SOLO

Originally confined to a Froot Loops promotional offer, Stormtrooper disguise Han made a pretty quick reappearance here. The figure is about 3 3/4 inches tall and he has the usual 6 points of articulation. His sculpt is similar to the previous one, but different for the sake of different. His pose is certainly changed up, largely the arms, which are now stretched outwards. The prior version was one of the rare instances of a figure that could conceivably hold his weapon two-handed (though, ironically, he had no weapon to hold), but not so with this one, who is back to the single hand hold.  Han’s paint work is very similar to the mail-away version, but the plastic used is a little different.  The skin-tone on the head is paler, and the torso and pelvis are prone to discoloring over time.  Han is packed with his removable helmet, and a standard blaster rifle.

CHEWBACCA

Chewbacca doesn’t have a drastic shift in looks in the movies, so he didn’t have any drastic shifts in figures during Power of the Force either.  He started off with one figure to cover all of the movies, and this one is a very, very minor tweak on that.  The figure stands about 4 inches tall and he has 6 points of articulation, with the caveat of the neck not *really* moving.  He’s almost exactly the same figure as the standard release, with the only notable change being the position of the arms.  It’s Chewy at his most swoll, encapsulating the early line as a whole.  The color work is also pretty much identical, for what it’s worth.  He does get a new accessory, which is directly tied into the new arms: handcuffs!  Perfect for recreating the scene.

LUKE SKYWALKER

Luke’s Stormtrooper Disguised figure was a standard release, so we didn’t *need* a re-release, but, you know, you gotta finish up the scene, I guess.  He takes pretty much the same approach as the Han, replacing the more basic standing pose of the single release Luke with a a wider stance, even wider than Han’s.  He’s got the same basic color work, and he’s got the same issue with the discoloring on the torso and pelvis.  Paint work on the face is honestly a lot nicer, though, so he’s at least got that going for him.  And hey, look at that, same helmet and blaster as well.  Lot of same-ness going on.

THE ME HALF OF THE EQUATION

This is honestly a pretty common Cinema Scenes set, so it’s genuinely surprising it took me this long to get around to picking one up.  I guess the right opportunity never presented itself to me.  Well, you know, until it did, which is why I own it now.  I’d seen a couple of loose ones, but didn’t really want to go that route, but a sealed set came into All Time, and now I’ve got one.  It’s easily the weakest, most forgettable of these sets.  There’s nothing that really makes it worthwhile, and I genuinely only have it for completion’s sake.  I don’t know of any other reason to get one, but, at the same time, it’s not like it’s a *bad* set, or anything.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3495: Luke Skywalker – Jedi Knight

Posted by Ethan Wilson in Reviews and tagged with , , , ,

LUKE SKYWALKER — JEDI KNIGHT

STAR WARS: THE BLACK SERIES (HASBRO)

Nine years and some change ago, I opened my review of Jedi Knight Luke Skywalker by remarking that my interest in The Black Series was beginning to wane.  Over 200 figures later, that does seem like it was a slightly premature assessment of things, but on the flipside, I’m feeling myself back in that boat again a little bit these days.  This time around, of course, it’s more on me than the line.  I’m just not as invested on having every character in every style anymore.  But, somewhat appropriately, I’ve been swayed by another Jedi Luke, so, I guess I’m taking a look at that one today.

THE FIGURE ITSELF

Luke Skywalker (Jedi Knight) is part of the third series of the RotJ Retro Carded Black Series figures.  While the last two assortments have been largely re-cards of older figures with just one new figure per set, this assortment is almost entirely new (albeit with one figure that’s gotten a pretty quick re-release in the main line), and Luke is included in that grouping.  We’ve had a healthy helping of Jedi Lukes in the line at this point, covering all manner of variations on his looks.  This one covers the same ground as his first Black Series, replicating his design from his battle on the Death Star II.  The figure stands just shy of 6 inches tall and he has 29 points of articulation.  This figure’s articulation is pretty much the same set-up as the Book of Boba Fett version, which is a marked improvement on the old Jedi Luke’s set-up.  Those butterfly shoulders in particular really add to the figure’s posing options.  Structurally, he’s using most of the parts from the Light Cruiser Luke, which is sensible, what with the similarities in design and all.  He loses the vest overlay piece and gets a new head sculpt, now based directly on Hamill, rather than the Mandalorian facsimile of him, as well as an adjusted chest flap folded down like during his battle with Vader, and a belt piece.  The new head sculpt is really nice, and certainly the best RotJ-era Hamill we’ve gotten at this scale.  The separate face/hair set-up works especially well this time around.  Luke’s color work is a lot of molded colors, but there’s some solid paint work on the face and hair, and the smaller details on the outfit are handled very cleanly.  Luke is packed with an alternate chest flap, fully closed up, as well as his lightsaber.  It’s kind of light, but it’s about what I’ve come to expect at standard pricing for this line.

THE ME HALF OF THE EQUATION

I didn’t intend to buy this figure.  I swear.  I had the first Jedi Luke.  I had the Jabba’s Palace version.  I had the Endor version.  I even had the Book version.  This one?  I didn’t need it.  My bases were all covered, right?  Well, apparently not.  I saw him in person, and I just couldn’t pass him up.  What can I say, I’ve got a soft spot for the look.  I’m glad I didn’t pass him up, because he’s an absolutely fantastic figure, and far and away the best version of Jedi Luke out there.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3468: Luke Skywalker & Grogu

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE SKYWALKER & GROGU

STAR WARS: THE BLACK SERIES (HASBRO)

“To help him hone his skills and understand the ways of the Force, Grogu trains with a new Jedi Master: Luke Skywalker”

One of the things that has been a marvelous accomplishment in this day and age of literally no narrative turn or surprise going un-spoiled has been the fact that The Mandalorian managed to completely surprise audiences not once, but twice.  First, with Grogu’s reveal at the end of the very first episode, and again with Luke Skywalker’s arrival at the end of the show’s second season.  Due to the secrecy required for such surprising, they were both late arrivals to the merchandising side of things, but now things are in full swing for both of them.  And hey, here they are in one convenient package!

THE FIGURES THEMSELVES

Luke Skywalker and Grogu are part of the Book of Boba Fett-sub-set of Star Wars: The Black Series.  The set is numbered 7, and it started hitting late summer.  It exists at a unique price point, as it’s officially billed as a two-pack, but since Grogu’s not a full scale figure, it’s between a deluxe price and a full two-pack price.

One of the impressive things about Luke’s Jedi Knight design is its slow evolution over the course of the film.  Its something that his Mandalorian and Book appearances have kept rolling.  So, by the time we get to his appearance in Book, he’s actually not got any common elements with his Jabba’s Palace look, but the general vibe is still maintained.  Since we’ve gotten every other possible variant on the Jedi look, we’re at the Book design.  The figure stands just shy of 6 inches tall and he has 29 points of articulation.  Luke’s articulation scheme is the standard set-up for Black Series these days, with the one notable change-up from prior versions being the addition of butterfly shoulders, which are very definitely a welcome addition.  Luke’s sculpt is all-new, though there are definitely a lot of similarities to the other Lukes of the same general design.  It’s an interesting sculpt, especially when it comes to the head, since it’s based on a facsimile of Hamill’s likeness, rather than a direct likeness.  With that in mind, it looks pretty good.  Honestly, it’s probably more authentic than what we saw on screen.  Certainly less unnerving, that’s for sure.  The rest of the sculpt is pretty good, and honestly gave me the ability to see just how different his garb in Book really is from the other appearances. Paint work on this guy is minimal, pretty much just on the head, since everything else is just molded colors.

The last time I looked at a Grogu figure, he still wasn’t officially being billed as Grogu.  Oh how the times change.   There have been so many Black Series Grogus over the years, but it’s only the second one that I’ve taken a look at here.  He’s not drastically different, since his design hasn’t really changed.  He’s still just over an inch tall and he still has 7 points of articulation.  Though he looks exceedingly similar, Grogu’s sculpt is unique from his original figure.  It’s actually a fair bit sharper in terms of detailing, and its most important detail change is his left hand, which has a proper grip on it, for use with accessories.  His color work is again very similar, but there’s a touch more detailing on the head, which really adds more life to the whole thing.

The set includes a whole host of accessories.  We get Luke’s lightsaber (with removable hilt), the back pack for carrying Grogu, a riser piece to prop up Grogu in said back pack because it’s a re-use of the Yoda one, Yoda/Grogu’s lightsaber with an alternate un-ignighted hilt, a box for the hilt, Din’s gift for Grogu, the small frog-like creature, a training drone, a flight stand for the drone, and an effects/environment stand for the drone and Grogu to interact.  Honestly, it covers just about everything you could possibly want from the interactions between the two of them in the show.

THE ME HALF OF THE EQUATION

Weird CGI-face aside, Luke’s reappearance in The Mandalorian filled me with all sorts of nostalgic excitement, and I wanted some form of figure coverage.  But, by the time his figures from that appearance started hitting, he’d shown up on Book, and I really dug the further updated look.  The two-pack really hit right where I wanted for a post-Jedi look, and I get an updated Grogu to boot.  This set is perhaps a touch pricey for what it is, but it works very well for me.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3096: Luke Skywalker’s Desert Sport Skiff

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LUKE SKYWALKER’S DESERT SPORT SKIFF

STAR WARS: POWER OF THE FORCE II (KENNER)

Power of the Force II was, at its heart, very much a product of its time.  And that time was the ’90s, a time for goofy, pointless variants of main characters.  While Star Wars has always had its own particular take on such things, and PotF2 tended to stick that, the line did dabble in the more traditional goofy variants territory, courtesy of its first round of “Deluxe” figures.  The first four figures in the set were all re-workings of standard figures, each with a big gimmicky variant.  Today, I’m looking at the Luke Skywalker of the set, packed with his Desert Sport Skiff.  Perfect for all those Desert Sport needs.

THE FIGURE ITSELF

Luke Skywalker’s Desert Sport Skiff was released as part of the first Deluxe assortment of Power of the Force II figures in 1996.  The figure stands 3 3/4 inches tall and he has 6 points of articulation.  The sculpt on this figure is very similar to that of the line’s first Luke figure.  There are some minor adjustments; notably the legs are a little closer in stance, and the torso has had a peg hole added.  Not sure why on the peg hole, since there’s not practical reason for the addition, or anything, but it’s there.  Other than that, it’s the same basic sculpt as the first figure, with all that entails.  He’s still super buff, and not particularly similar to Mark Hamill in terms of look.  But, uhh, it’s consistent, right?  Who didn’t want another chance to get a real swoll Luke?  The paint work on the figure, much like the sculpt, is different for the sake of different.  Not very different, mind you.  The base colors are the same, just the exact shades are slightly tweaked.  It accomplishes the same end goal overall, so the changes are likely more of a difference in production year, and not something that was an intentional change or anything.  The main “selling point” on this figure, if you can call it that, is the Desert Sport Skiff, which was totally new to this release.  It’s a big skiff thing.  He stands on it, and it can fold up the sides, as well as having a missile at the front that can launch.  Truly thrilling stuff.

THE ME HALF OF THE EQUATION

As I discussed in my review of the Crowd Control Stormtrooper, these figures always seemed kinda odd to me as a kid.  They’re ultimately a little bit pointless, being mostly re-hash, at least at the core.  That said, there’s kind of a cool vibe of a road not travelled with these releases.  Sort of an alternate path that could have been taken had Kenner stuck to doing more conventionally toyetic variants of the main characters.  The big Skiff thing is goofy and silly, but also kind of amusing, and it’s fun to get another stab at the swoll Luke figure.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3091: Luke Skywalker and Tauntaun

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE SKYWALKER AND TAUNTAUN

STAR WARS: POWER OF THE FORCE II (KENNER)

My last Power of the Force review before my great big gap in Power of the Force reviews was a creature set.  It was, specifically, the line’s largest creature set.  So, there’s quite literally no topping that.  I guess I’ll just go to the opposite side of the spectrum, and tackle one of the line’s smallest creature sets…which was also kinda borderline one of the line’s smallest vehicle sets, I guess, depending on how you look at it.  Can a living being be a vehicle?  And, what’s the over/under on how long the Tauntauns actually live, and where that places them on this whole vehicle scale?  Eh, I think I’m going to deep on this, you guys.  Let’s just get to the actual review.

THE FIGURES THEMSELVES

Luke Skywalker and Tauntaun were released in 1997 as part of the Power of the Force line’s creature-based sub-set, alongside Han and Jabba, the Sandtrooper and Dewback, and the Jawa and Ronto.  It was the smallest of the 1997 sets, though that didn’t mean it was any cheaper.  It was the only Empire-based creature set from the first year, and one of three overall in the sub-set (with this set effectively being split up and re-paired for the other two Empire sets the following year).

The Tauntaun was obviously the selling point of this set, having not been released in figure form since Kenner’s original Empire line.  While the vintage releases both more or less just averaged the appearances of Luke and Han’s Tauntauns, this one decidedly adapts Luke’s, so as to properly pair off with him in the set.  The figure stands about 4 1/2  inches tall and has 5 points of articulation.  The sculpt on this one was unique at the time, though most of it would later see re-use for the Han and Tauntaun pack the next year.  The sculpt is a pretty solid one. It presents a slightly more active Tauntaun than its vintage counterpart, which seems more appropriate for how we see them in the movie, where they’re frequently in motion.  The details match up pretty well with the movie prop, though it is in some ways sporting some slightly more idealized proportions than the real thing.  The detail work isn’t bad, with some passable texturing on the fur, as well as plenty of extra work going into the harness and survival kit on the main body.  The paint work on this release is mostly pretty good.  There’s a lot of attempts at proper accenting which *mostly* work.  The shading on the fur and the white flecks for snow both work out.  The odd yellow on the arms and legs, not so much.  I’m not entirely sure what the aim was on those, but it missed.  The Tauntaun’s only real accessory is its harness/lead, which clips into the mouth, and allows for Luke to more properly hold on.

It makes very little sense to release Luke’s Tauntaun and not a Luke to go with it, I suppose.  There’s of course the single Hoth Luke release, but he notably lacks in the “being able to actually sit on the Tauntaun” department.  This one aims to fix that.  He stands about 3 3/4 inches tall and has 8 points of articulation.  The extra articulation comes in the form of actual knee joints.  Pretty crazy to see those, especially on a figure of this era, but they did happen from time to time.  Check out his actual sitting action!  From the waist up, he’s effectively the same as his single-release counterpart, with one minor tweak to the left arm, so as to slightly reposition his hand.  Other than that, he’s the same, which is good from a consistency standpoint.  The paint work likewise is pretty close.  It’s solid work, with clean application, and all the major colors it needs.  Luke is packed with his blaster pistol.

THE ME HALF OF THE EQUATION

I had the single Hoth Luke as a kid, and never got a ton of use out of creatures, so I never had this one.  I remember it, especially the way it lingered for a bit, but it just never really called to me.  As I’m working on a full set, I’m picking up a lot of items that I passed on over the years.  In some cases, it’s not so thrilling, but sometimes it leads to me discovering some items I really like.  This one’s part of that latter category, and I’m glad I finally got around to picking one up.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#2995: Rancor with Luke Skywalker

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

RANCOR with LUKE SKYWALKER

STAR WARS: POWER OF THE FORCE II (KENNER)

“Within Jabba the Hutt’s desert palace on Tatooine, there is a special pit that houses a rancor. Over five meters in height, this reptilian-like creature has long, exaggerated arms, dangerous fangs and huge claws — truly a fearsome sight. The crime lord uses the rancor as a means of eliminating enemies and failed employees. Its pit is located beneath Jabba’s court, providing an excellent view for the crime lord and his associates as victims struggle helplessly to defend themselves. That all changes when Luke Skywalker is dropped into the loathsome pit. Armed with only a large bone leftover from one of the rancor’s previous victims, the Jedi Knight conquers the horrible beast.”

Oh boy, that sure is a nice Rancor there.  Sure would be a shame if someone were to…SABOTAGE IT!!!!  Right?  Get it?  Because, it’s like the whole thing where a bunch of winy fanboys claimed that Hasbro was sabotaging their own product, and then it was ultimately the winy fanboys who…you know…actually sabotaged it?  Isn’t it funny?  Or is it just sad.  Oh, right, it’s probably just sad.  And I’m likely to piss someone off with this intro, aren’t I?  Ah well, these days I fear nothing, so I’ve really got nothing to lose.  Not even the Rancor.  Especially since I wasn’t backing the Black Series one anyway.  But that’s not the point.  What is the point is that I’m falling back on my classic Star Wars reviewing fodder, Power of the Force, and that’s where I’m staying.

THE FIGURES THEMSELVES

The Rancor with Luke Skywalker were added to Kenner’s Power of the Force II line in 1998, as the largest of the creature packs that they were doing.  They’re based on Return of the Jedi, of course, and were actually the only creature pack where that was the case, since Jabba was from his Special Edition appearance in A New Hope, rather than his classic Jedi look.

RANCOR

Certainly one of the largest creatures in the Star Wars verse, or at least one of the largest that’s justifiable in toy form, the Rancor has been getting toy treatment since the vintage line.  This would mark its second time in toy form.  The figure stands about 10 inches tall (thanks to the hunch) and has 6 points of articulation.  He’s not an overly mobile figure, but the Rancor’s also not an overly mobile creature.  It’s main purpose is really just to lumber menacingly, which this one does quite well.  It does have a little trouble standing up, but careful posing can help it find that sweet spot for staying balanced.  The Rancor’s sculpt was an all-new one.  The vintage figure had gone far more basic on its detailing, so this one stepped things up a bit.  The end result is quite a nice piece, especially when compared to some of the smaller figures of the same line.  He’s a respectable match for the creature we see on-screen, and there’s a lot of solid texture and smaller detail work.  Due to the nature of the softer plastic, some of the details are likewise a little softer, but it’s generally quite good.  The only downside to this one is the “Real Feel Skin” feature, which can make him prone to a bit of gunk build-up.  It’s not quite as bad as yesterday’s Clayface figure, but it does require some occasional cleaning.  The paint work on the Rancor is pretty solid, actually.  There’s some decent accent work on the skin, which helps to bring out more of the sculpted details, as well as add a little more depth to the figure’s overall look.  The Rancor gets no accessories of its own, but it does get…

LUKE SKYWALKER

…a Jedi Luke variant.  1998 had quite a few Jedi Luke variants, covering various deviations of his main look throughout the film.  This one is very specifically Jabba’s Palace, after he’s lost the cloak and saber, before he’s gotten shot in the hand.  It’s the only one to fit that very specific narrative.  The figure stands 3 3/4 inches tall and he has 6 points of articulation.  He uses the same head and torso as a few of the Jedi Lukes from the same year, which makes sense from a consistency standpoint, and also means he’s re-using some pretty decent parts.  The arms and legs are new, and designed with him leaning back to look at the Rancor in mind.  The legs do make him a little tricky to keep standing, and the arms are unfortunately rather stiff for any decent posing.  He’s not a bad sculpt, but he’s a more limiting one to be sure.  His paint work is a little more involved than other Jedi Lukes by virtue of him having a bunch of brown flecks to simulate Tatooine sand.  It’s all a ploy to keep his father at bay, really.  Luke is packed with the large bone he uses to defend himself against the Rancor, which is a pretty fun scene specific piece.

THE ME HALF OF THE EQUATION

I was definitely a Jedi Luke fan as a kid, and liked this particular scene a lot, but it was kind of an expensive set, and never a super easy one to find, so I didn’t get this one as a kid.  Instead, I got it quite recently, just over the last summer, when one of them came through All Time loose.  I’ve actually been low-key looking for one for a while now, so I was pretty happy to finally get one.  It’s definitely an important piece of the PotF collection, and one I’m glad to finally have.  There have been more involved Rancors since, but this one’s still just a very nice piece, and the Luke pairs off well with him.

#2869: Final Jedi Duel

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE SKYWALKER, DARTH VADER, & EMPEROR PALPATINE

STAR WARS: POWER OF THE FORCE (KENNER)

“Under the evil gaze of Emperor Palpatine, the lightsabers of two Jedi Knights – a father and son – clash furiously in a final duel between the light side and dark side of the Force. Slowly, the young Skywalker is lured closer to the rage of the dark side, and Palpatine sits confident of the Rebellion’s defeat and the acquisition of a new emissary to fulfill his evil legacy! But the young Jedi’s resistance appears to be growing…”

Though its later years saw Cinema Scenes switch more to getting out never before released characters and obscurities out in a quick shot, Kenner launched it with a focus on actually recreating distinctive scenes directly from the film.  It doesn’t get much more distinctive than Luke and Vader’s duel on the second Death Star during the climax of Return of the Jedi, so it’s not a terrible surprise that this scene was one of the ones more specifically recreated.  In fact, they technically recreated it twice, if you count the Power F/X figures.  But this was the only time they did it in Cinema Scenes.

THE FIGURES THEMSELVES

The Final Jedi Duel was added to the Cinema Scenes sub-line of Kenner’s Power of the Force in 1997.  It was the only Jedi-based set from the first year, though many would certainly follow.  The set included a stand, like all of the Cinema Scenes, but this time it was a far more integral piece, since the Emperor’s chair is permanently affixed to the stand.

LUKE SKYWALKER

Jedi Luke was no stranger to this line, although at this point, he’d only had one version, and it was iffy on screen accuracy, since it amalgamated a few looks.  This one was unique in Power of the Force in that it was actually a Death Star II version of Luke, specifically sans the vest.  In fact, it was the first ever non-Endor Luke to not sport the vest, so that’s pretty cool.  The figure stands about 3 1/2 inches tall and he has 6 points of articulation.  While the core line was moving from pre-posing at this point, they had really translated it into the Cinema Scenes figures, which remained quite pre-posed in their first year.  Luke is one of the most impacted by this, with a deep lunging saber dueling pose.  It looks impressive when the whole set-up’s there, but on his own, it can be a bit limiting.  Notably, it makes him really hard to keep standing, which I’m not big on.  That said, the actual sculpt isn’t a terrible one.  Notably, it introduced a new head, more specifically tailored to Jedi than the one on the prior Jedi Luke.  It’s honestly not a bad likeness, especially for the time.  The paint work on this figure is pretty basic, but in keeping with the line.  He does get shiny boots, so that’s fun.  He’s packed with his lightsaber, which he has a little trouble holding.

DARTH VADER

Vader was also no stranger to the line.  This marked the third version of him for the line, each one being slightly more pre-posed than the last.  It was another amalgamated design, keeping with the other two.  The figure stands just over 3 3/4 inches tall and he has 6 points of articulation.  This Vader sculpt actually got re-used a few tomes, mainly for the wonky colored repaints that Hasbro liked trotting out for anniversaries and special occasions.  Like Luke, he’s rather pre-posed, though this one’s a little more stable, and he can actually stand on his own.  Generally, he looks a lot like the prior two, but the one notable improvement here was the inclusion of his skirt beneath his cape.  That marked a first for a Vader figure, so it’s kind of a big deal.  His cape has been re-worked here so that it’s not actually removable.  It’s connection is kind of weird, but otherwise I guess it’s not bad.  The paint on Vader pretty much matches the other versions from the line.  It’s not like he really had any major change ups in the films, so if it ain’t broke, don’t fix it.  Vader is packed with his lightsaber, which he holds a lot better than Luke.

EMPEROR PALPATINE

Ah, Palpatine.  Always the most thrilling action figure subject.  He’s so exciting, right?  What’s this one’s gimmick?  He sits.  That’s it.  That’s the whole thing.  Literally, he takes the overall vibe of all of the other Power of the Force Palpatines, folds him in the middle, and makes him sit in his sit-and-spin chair.  Technically he’s got articulation, and technically you can take him out of the chair, but really, what’s the point?  It’s not like you’re going to do anything else with him.  He’s made for sitting.  I suppose that’s more to the point for the character than other figures, so kudos to Kenner for that.  He’s also got the chair, which does look pretty cool.  Too bad you can’t take it off the base, but it’s still nice.

THE ME HALF OF THE EQUATION

The Final Jedi Duel is a rather recent addition to my collection.  It got traded into All Time a couple of months ago, sealed.  They’d come through loose a few times, but without the base, at which point Palpatine is actually pointless, so why bother?  So, when it was a sealed one, that was a pretty easy sale for me.  It’s not a terrible set.  It doesn’t have the broader appeal of other Cinema Scenes, since none of them really work outside of the setting.  On the other hand, it makes it one of the truest sets to the actual concept, so I guess there’s that.

#2846: Luke Skywalker & Ysalamiri – Heir to the Empire

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE SKYWALKER & YSALAMIRI — HEIR TO THE EMPIRE

STAR WARS: THE BLACK SERIES (HASBRO)

“Five years after the destruction of the Death Star, Luke Skywalker fears there is no hope as the remnants of the Imperial fleet are readied for war under the command of Grand Admiral Thrawn.  Using ysalamiri to sever a developing Jedi clone’s connection to the Force allowed mentally stable Jedi clones to be created—a discovery Thrawn would use in his war against Luke Skywalker and the New Republic”

Timothy Zhan’s Heir to the Empire made itself into a rather stable corner stone of the Star Wars Expanded Universe when it debuted in its original prose form in 1991, and became even more cemented when it was further adapted into comics form in 1995, giving a visual narrative to that post-Return of the Jedi world.  Heir would also introduced two of the EU’s most prominent and popular characters, Grand Admiral Thrawn and Mara Jade.  If you’re going to be doing a more EU-centered set of Star Wars figures, it’s a totally logical choice.  I mean, sure, we’ve already gotten a Thrawn, but there’s still a chance to do the *other* major character introduced, right?  That’s who you did, right?  Oh, no, we’re just doing a Luke Skywalker variant then, aren’t we?  Yep.  Well, let’s just do that, I guess.

THE FIGURE ITSELF

Luke Skywalker & Ysalamiri is the third offering in the comics-based Star Wars: The Black Series line-up.  He’s one of two non-comics original characters featured in the set, the other being Darth Maul.  He’s based on his appearance from the cover of the comic’s first issue, which also serves as the front of his box.  The figure stands just shy of 6 inches tall and he has 29 points of articulation.  He’s identical in sculpt to the Dagobah Luke from last year.  It’s a pretty solid sculpt, and, as I noted, it’s the most articulated Luke body Hasbro’s got in their parts catalogue.  While the outfits are certainly similar, though, it’s worth noting that it’s definitely an Empire Luke, and Heir is very much a post Return story.  At the very least, it feels like they should have used one of the Jedi Luke heads.  He’s also missing the belt he’s sporting on the cover, which is a shame, and really misses the one chance they would have had to give him a new piece.  The paint’s a bit tweaked, but not majorly so.  His outfit’s all black now, and that’s really it.  I guess it’s a little more striking, but it also means he loses a lot of the cool accenting and dirt that the prior release had.  In terms of accessories, Luke is decidedly pretty light.  He’s got his lightsaber, and the Ysalamiri that’s listed on the box.  The lightsaber is his Jedi version, complete with a green blade that’s not accurate to the comic, but is accurate to what Luke’s saber *should* be, so it shakes out.  Giving him both blade colors might not have been a terrible option, though.  The Ysalamiri is an all-new piece, but isn’t really designed for use with Luke himself, instead being designed to fit over the Thrawn figure’s shoulders.  Obviously, it’s nice that it fits him, since he’s most classically remembered with it on his shoulders, but it just makes Luke feel even lighter when one of his two accessories isn’t even for him.

THE ME HALF OF THE EQUATION

I really liked Dagobah Luke when he was released, so I certainly wasn’t opposed to a re-use.  That said, I never really warmed up to this figure that much pre-release.  Doing an Heir to the Empire Luke when we still don’t have any version of Mara Jade, the character he spends much of the story interacting with, in this scale at all, feels a bit backwards.  Not helping things is that he doesn’t really do much to give himself much reason to exist.  While this design’s the one on the cover, it’s not overly distinctive or exciting.  The pulled down jumpsuit look that the comic pack 3 3/4 inch version did might have honestly been a better choice, but barring that, just giving him a slightly more enticing accessory selection might have helped a bit.  As it stands, he’s alright, but not much to write home about.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for Black Series, or other toys both old and new, please check out their website and their eBay storefront.

#2729: Luke Skywalker

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LUKE SKYWALKER

STAR WARS: POWER OF THE FORCE II (KENNER)

Hey, remember yesterday, when I was talking about a mid-90s line’s use of light-up features in order to re-introduce some of the core characters into the market place again?  Well, as it turns out, Toy Biz’s X-Men wasn’t the only line to try that.  Kenner’s Power of the Force did it too!  Everything’s better with lights, right?  Well, Kenner certainly felt so.  While I’ve looked at the line’s one outlier, R2, already, they also covered the original trilogy’s four most action-oriented force users.  I’m kicking my dive into the line-up off with our hero, Luke Skywalker!

THE FIGURE ITSELF

Luke was released in 1997 as part of Power of the Force‘s “Electronic Power F/X” sub-line.  Luke gets more to the actual point of the line-up than R2 did, actually focusing on one of the OT’s cool fight scenes, in his case the battle between Luke and Vader on the second Death Star in Return of the Jedi….well, sort of, anyway.  The figure stands about 3 3/4 inches tall and he’s got 5 points of articulation.  He loses the usual waist joint, and also gets severe limitations on the right shoulder, both due to the electric feature.  Beyond that, none of the other joints really give him much actual range, due to the somewhat pre-posed nature of the figure’s sculpt.  He’s…sort of, like, mid-lunge, I guess?  Like, for stabbing?  I don’t know.  The actual sculpt’s not exactly Kenner’s finest work.  The head’s distinctly different from the original PotF2 Luke head that looked nothing like Mark Hamill, but still looks nothing like Mark Hamill, so it’s a lateral move.  The light-up features have a direct impact on the quality of the sculpt on the right arm and the torso, since that’s how the feature works.  The torso’s rather bulked up, especially at the back, in order to house the batteries, which give him sort of a hump back.  Not the most flattering thing, which is why he also gets the cape, which Luke doesn’t actually wear in the scene this is replicating, in order to hide the hump a bit.  The arm has been designed with the lightsaber built into it, with his hand kind of folded around it.  It’s kind of crude, and not really hand shaped, and the hilt is really wide, short, and basic in its detailing.  It’s definitely goofy looking.  There’s also this sort of cap piece that goes over the the actual blade.  I think it’s really just meant to be part of the packaging, but it’s not coming off of mine.  The actual light-up feature’s okay, I guess.  Not terribly bright, and barely noticeable in the photos here.  It’s also a little hard to activate, due to it being behind the cape. The paint work is all pretty basic work.  It’s not bad, but the right arm’s definitely a bit fuzzy.  Otherwise, pretty standard for the line.  Luke’s packed with a large base piece, meant to look like one of the halls from the Death Star.  Like R2, there’s an arm for moving him around, though this one doesn’t do the whole magnet thing; it’s just a basic peg set-up instead.

THE ME HALF OF THE EQUATION

As a kid, this was actually the only of the “Power F/X” figures I had, because I was all about Luke, and I was all about a good gimmick.  Unfortunately, these figures, more than others from the line, don’t really stand up to play so well.  As such, my original Luke is in pretty rough these days.  Fortunately for me, All Time had four of the five figures in the set right as I was ramping up on filling in my PotF collection, and that gave me the opportunity to pick up this guy again, alongside the rest of the set.  This guy’s hella gimmicky, and hella goofy, but I can get behind it.