#1978: Thanos, Iron Man Mark L, & Doctor Strange

THANOS, IRON MAN MARK L, & DOCTOR STRANGE

MARVEL LEGENDS — MARVEL STUDIOS: THE FIRST TEN YEARS

Despite being the central piece of the Tenth Anniversary celebration for Marvel Studios, Avengers: Infinity War was initially absent from the dedicated line of MCU figures from Hasbro, due largely to the initial MCU line figures hitting at the same time as the initial Infinity War offerings.  It wasn’t completely left out though, coming in right at the end with a boxed set based on the film.  So, what thrilling new, untouched characters did we get?  Well, none, actually.  New looks?  Again, no.  So what’s the point?  I’ll get to that.

THE FIGURES THEMSELVES

The Infinity War set is item 10 in the Marvel Studios: The First Ten Years sub-line of Marvel Legends, and contains Thanos, Iron Man, and Doctor Strange, meaning it’s a set entirely based on the battle on Titan.  All three figures in the set are slight reworkings of prior figures.

THANOS

As the central character of Infinity War, Thanos’ presence in this set is rather sensible, I suppose, though it is perhaps a little undercutting to the people that went to the trouble of actually building the Build-A-Figure.  This figure is a reworking of that one, reviewed here. As I noted the first time I reviewed it, it’s an okay sculpt overall, but not without its issues.  Fortunately for this figure, a couple of those problems have been addressed.  The figure comes pre-assembled, so the issues of falling apart don’t occur.  Additionally, his kind of gassy looking expression has been replaced with two different heads.  The first has a simple grimace, while the second has an angry teeth-baring expression.  Both are much better suited to Thanos than the one included to the BaF, and look like pitch-perfect recreation of his look from the movie.  Additionally, his gauntlet hand is a new piece; rather than the fist of the prior release, this Thanos’ hand is in an open gesture, which feels like a more classic Gauntlet pose.  I actually like this a lot more than I’d expected to, and it adds a lot to the figure’s posing options.  Lastly, the paint on Thanos has been changed, to better match the film.  The skin in particular is a lot nicer looking, being lighter, more lively, and flatter in its finish.  The rest of the paint is a bit brighter, slightly more contrasting, and just generally more exciting to look at.

IRON MAN MARK L

As cool as Iron Man’s armor was in Infinity War, none of the figures really captured the full extent of said coolness, his Legends release included.  This one doesn’t really fix that, but let’s see what it does.  He’s a re-working of the Thanos Series Iron Man, which is the same suit, so I guess it makes sense.  I actually liked that one a lot, despite it not being completely film accurate.  This one swaps out the torso for a new one, which loses the mid-torso joint, but in exchange gains a light-up feature on his arc reactor.  It’s gimmicky and somewhat restricting, but it’s still pretty fun.  This Iron Man includes the same accessories as his predecessor, extra hands and blast effect pieces.  No cool nano creations or anything, which is sad, but not a huge surprise.

DOCTOR STRANGE

Despite his decently sized role in the film, Doctor Strange was actually not featured in the Legends line-up for Infinity War.  As such, this figure goes back to Strange’s figure from his solo outing, reviewed here. This figure’s actually pretty substantially changed compared to the other two figures in the set, since the initial figure was based on early designs, rather than his final film look.  This one amends that, with a new head, cape, and right forearm.  The head sports a much better likeness of Cumberbatch, especially his disheveled self from the movies.  The new cape also captures the proper shaping of the movie much better, plus it actually pegs into his back this time, so it doesn’t shift all over the place like the original.  The new forearm has the Time Stone effect sculpted on it.  It’s a little warped on mine, but still looks pretty cool.  It’s not removable, and there’s no standard forearm to replace it, so you have no choice but to have him using it.  That’s really the only flaw against this figure.  Strange’s paintwork is also a bit different from the last release.  The most major change is the printed face, which certainly looks more lifelike.  He also changes up the overall color scheme of his costume, following Thanos’ lead by making the overall design brighter and more contrasting.  Doctor Strange is packed with a spare left hand, as well as another magic effects piece, which looks a little odd in conjunction to the Time Stone effect.

THE ME HALF OF THE EQUATION

When this set was unveiled, I will admit, I was quite underwhelmed, since I had the original releases of all three figures and all.  It didn’t really matter, though, since it never really showed up around me.  Or so I thought.  The set showed up at Super Awesome Fiancee’s store, and was actually there long enough to get decently clearanced. Being the ever-supporting Fiancee that she is, she of course bought it for me.  I knew going in the Strange was going to be my favorite, and that proved true.  I didn’t anticipate how much I was going to like the Thanos figure, who is just across the board an improvement to the BaF.  And, while Iron Man may not blow his predecessor away like the other two, I actually like the light-up feature a fair bit, so I’m happy enough to have him.

Advertisements

#1860: Iron Man – Mark VII

IRON MAN — MARK VII

MARVEL LEGENDS — MARVEL STUDIOS: THE FIRST TEN YEARS

“Equipped with a mighty Vibranium arc reactor and enhanced flight capacities, the Mark VII is a Fully-Loaded Rapid Deployment suit built for heavy combat.”

Despite the movie’s immense financial success, the tie-in action figures for Avengers were rather understated.  The poor sales of toys for Captain America and Thor, as well as the general lingering of Iron Man 2’s later assortments, meant that retailers weren’t really jumping all-in for line-ups featuring many of those same characters.  Mass retail only wanted smaller-assortment, smaller-scale figures, but Hasbro was able to sell Walmart on an exclusive run of Legends scale figures for the movie.  Of course, this exclusive run meant there were some cutbacks, such as everyone’s favorite armored avenger being stuck with a re-pack of his Mark VI armor from Iron Man 2, rather than the Mark VII armor that more appropriately fit the line-up.  Fortunately, Hasbro took the tenth anniversary of the MCU to amend this issue.

THE FIGURE ITSELF

The Mark VII Iron Man is entry 3 in Hasbro’s Marvel Studios: The First Ten Years sub-line of Marvel Legends.  He is the final of the three single-packed offerings from the line, following the previously reviewed Red Skull and Ronan the Accuser.  This is, of course, Tony’s Mark VII armor, which he sports during the proper assemblage of the Avengers during the film’s big climactic battle.  The figure stands 6 1/2 inches tall and has 37 points of articulation.  Not only does this figure have the most articulation of any of the movie Iron Men, it’s also implemented in the most workable fashion here, meaning that the Mark VII is hands down the most posable MCU incarnation of Iron Man in the Legends line-up.  Though it takes a little bit of cheating, you can also get his signature three-point landing out of this figure, which ended up being one of its selling points for me.  What’s more, you can even move all of the flaps on his back, and his head can almost look straight up.  We saw a lot of improvements in this direction fro both the Mark 46 and Mark 50 releases, but this guy really seems to take everything they’ve learned and even further build on that.  Obviously, with all of this improved articulation, you kind of need an all-new sculpt, and this one’s a very good one.  Thanks to a much-delayed release, Hasbro was able to actually make the figure as faithful to the film as possible, and they’ve generally succeeded.  There are still a few little details here and there, but he’s very, very close.  The biggest plus for me is that, unlike the IM2/IM3 armors, this one is actually properly scaled with the rest of the MCU Legends, and can conceivably be an actual guy in a suit of armor.  The paint work for the Mark VII is solid, and again, one of the strongest entries we’ve seen for an MCU Tony.  The metallic red plastic works very well, being neither too bright or too dark, and the rest of the application is pretty clean.  There’s a slight scuff on my figure’s right leg, but he’s otherwise pretty good.  The Mark VII is packed with a second set of hands, this time in the repulser blast pose (which, sadly, continue the tend of not having the same articulation as the fists), as well as the now-standard blast-effect pieces, this time in a transparent yellow.  I was a little saddened that there was no unmasked head this time, which is about the only major complaint I can lobby against this figure.

THE ME HALF OF THE EQUATION

My disappointment with the Mark 50, combined with my prioritizing of the other figures in the Marvel Studios set, meant that I passed this figure up a great many times.  I guess I just didn’t think too much of him.  It was actually Super Awesome Fiancee who brought him home for me from her work, at which point I was able to re-examine him in-hand, and realize I’d been totally wrong about this guy.  There’s a lot to like here.  He’s the best MCU Iron Man on the market, and the easiest one to find at that.  I whole-heartedly recommend him!

#1759: Thor & Lady Sif

THOR & LADY SIF

MARVEL LEGENDS — MARVEL STUDIOS: THE FIRST TEN YEARS

Though very successful, and overall very good at creating a sense of consistency throughout its films, the Marvel Cinematic Universe is not without its missteps.  Incredible Hulk is the result of inheriting an initially unrelated production late in the game, but I still like it.  Iron Man 2 is a slightly bungled attempt at doing the whole wider universe thing in a solo film, but once again, I still quit like it.  So, let’s talk about my least favorite MCU entry by some measure, Thor: The Dark World.  Boy did I want to like it.  And it’s not a *bad* movie.  In fact, there are some truly fantastic sequences in it.  The trouble is, they all seem to be immediately followed or preceded by a rather terrible sequence that just sucks all the joy right out of you.  Through coincidence, The Dark World is also the least merchandised of the MCU films.  While the first Thor got a rather comprehensive 3 3/4 line, plus a Legends scale Thor, and Ragnarok at the very least got its most prominent players as Legends, The Dark World only got a very small handful of 3 3/4 inch figures from Hasbro, and no Legends at all.  At least that last bit’s getting amended now, with Thor and Lady Sif!

THE FIGURES THEMSELVES

Thor and Lady Sif are entry 5 in the Marvel Studios: The First Ten Years sub-line of Hasbro’s Marvel Legends.  It follows the lead of the Captain America and Crossbones pack, with one brand-new figure, and one slightly tweaked.

THOR

Thor fills the slot for “slightly tweaked.”  Of course, that’s far less of an issue for this figure than it was for Cap, since the Amazon-exclusive figure this Thor’s based on was actually a pretty solid offering from the start.  This figure’s purpose is more to offer a slightly tweaked costume design. Like the figure he is built from, this guy stands 7 inches tall and has 28 points of articulation.  While it’s a little odd to be getting a figure at this point in the line that lacks the usual style of neck articulation, thanks to the hair, it’s not like he’s missing anything.  This figure uses most of the same pieces as his AoU counterpart, but gets a new set of chain-mailed arms to differentiate him ever so slightly.  Differentiating him even a little bit more is the paint work.  Aside from the obvious changes to the arms, they’ve also slightly changed the shade of the metal bits on the front of his costume, so that they now match the gold-er hue from The Dark World.  Of course, the biggest change by far is on the head, since this figure makes use of the fancy new face printing technique.  This does sort of have one downside, which is now that I’ve seen this head with a much better paint job, I now know for certain that it’s the sculpt and not the paint that had a slightly off Hemsworth likeness.  Well, at least he looks more like a real person, right?  Thor is, as usual, packed with his hammer Mjolnir, which remains a very well sculpted piece.

LADY SIF

And, of course, Sif is the brand-new component here.  Though she never got a super huge part, Jaime Alexander’s Lady Sif was one of my very favorite parts of the first two Thor films (in fact, the scenes with her and the Warriors Three are the real saving grace of The Dark World for me), so the fact that she hadn’t yet gotten the Legends treatment was quite sad indeed.  Sif is seen here in her slightly tweaked Dark World armor (which was also used for her appearance in Agents of S.H.I.E.L.D.), which I will admit is a slightly better design than her look from the first movie.  The figure stands 6 inches tall and she has 27 points of articulation.  She’s got an all-new sculpt, and it’s a very strong offering.  The head has a pretty much spot-on likeness of Alexander, and the hair manages to not be incredibly limiting for the neck joint, which is certainly a plus.  The body is possibly a touch skinny for Sif’s fully armored appearance, but it’s not terribly far off, and the detail work is definitely impressive.  The use of separate pieces for her shoulder plates works out well, allowing for slightly better mobility, greater depth to the sculpt, and a much cleaner transition from skin to armor.  Sif’s paint work is all quite clean, and replicates her color scheme from the movie very well.  Like Thor, she uses the face printing technique, which really pays off here, and further highlights the sculpt’s likeness of the actress.  They’ve even gotten the small beauty spot on her right cheek; an easy to miss detail, but one that sells the likeness that much more.  Sif is packed with her shield, a single version of her sword, and two other swords that can be connected into a staff, just like in the movie.  Not a bad assortment at all.

THE ME HALF OF THE EQUATION

Like the other three of these, I got this pair from Super Awesome Fiancee, who picked them up for me from work.  I wasn’t initially sold on getting the second Thor figure, since I had the Amazon one and all, but he’s definitely a solid figure, and I don’t mind getting the slight variation.  Sif is a truly amazing figure, and I’m glad to have finally been able to add her to the collection.  The only downside is that now I really want the Warriors Three to go with her…

#1758: Captain America & Crossbones

CAPTAIN AMERICA & CROSSBONES

MARVEL LEGENDS — MARVEL STUDIOS: THE FIRST TEN YEARS

Although the Avengers survive a strike by Crossbones on Lagos, dozens of civilians are killed in the altercation. As a result, the team is presented with the Sokovia Accords – an agreement designed to keep the heroes in check – and must individually choose which side of the law they stand with.”

Like Guardians of the GalaxyCaptain America: Civil War was fortunate to come late enough in the MCU game that Hasbro was finally comfortable actually doing a pretty decent line-up of tie-in Legends.  However, while it got greater coverage than prior entries, it also had a far larger roster of characters in need of figures.  While Hasbro did their best to include everyone they could (and then to follow up and fill some of the gaps using Infinity War), the heroes really ate up all of the slots.  If nothing else, this Marvel Studios anthology line has really been about the bad guys.

THE FIGURES THEMSELVES

Cap and Crossbones are entry 9 in the Marvel Studios: The First Ten Years sub-line of Marvel Legends.  Both figures are based on the characters as they appear in Civil War‘s opening battle.

CAPTAIN AMERICA

America’s first super soldier, Captain America must decide if he stands by his government in the aftermath of a disastrous strike on Lagos, Nigeria.”

Now, before we get to the new hotness, let’s review the old busted.  Okay, perhaps “busted” isn’t a completely fair assessment of things here.  While Cap wasn’t without a figure from Civil War (he got two, in fact; helps to have your name in the title), there’s no denying that the figure we received had some issues. This one is meant to amend….some of those issues.  I’ll get to that.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  Pretty standard stuff there.  Now, the good news is that Cap has received not one, but two different new head sculpts.  He’s got both helmeted and un-helmeted.  Both heads are very good sculpts.  The helmeted head has a decent likeness of Evans (or at least what you can see of him), and via its use of a separate piece for the helmet, has a great sense of depth to his look that prior MCU Caps have not.  The un-helmeted head edges out the other one just a bit, in no small part due to the absolutely spot-on likeness of Chris Evans.  After years of “close but not quite,” this guy gets it down nearly perfect.  Alright, I’ve raved about the good.  Ready for the bad?  You know those two amazing head sculpts that Hasbro produced, that can finally replace the two sub-par ones we’d been dealing with since Winter Soldier?  Well, they went and slapped them on the slight variation of that body from Age of Ultron.  I was already frustrated by its re-use for the original Civil War release, given the inaccuracies of the costume details, as well as the somewhat scrawny nature of the limbs.  It’s made even more egregious by the fact that Hasbro created an entirely unique mold for the Infinity War Cap, which is, canonically, wearing the same uniform as this figure.  With a handful of new pieces, that mold would have made for a far more accurate body for this figure.  Instead, for the third time, we get a Civil War Captain America whose costume is just incorrect.  That’s a real shame.  On the plus side, he does get new paint to match those new parts.  The body isn’t far removed from the prior release, but both heads are now sporting the face-print tech, which makes a world of difference in terms of making him look like a real person.  In addition to the new unmasked head, Cap also has his shield, which is another new sculpt.  I like this one better than prior releases, though I can’t really say it’s too noticeably different.

CROSSBONES

“A Hydra agent and former double-agent at SHIELD, Crossbones makes it his mission to take out Captain America, no matter the loss of life at stake.”

And here we have the new hotness.  Crossbones may not be in Civil War for super long, but he had a very important roll to play, and, more importantly when it comes to toys, he had a pretty sweet design.  At the time of the movie’s release, he got a Minimate and one of those Microverse figures, but that was all.  Obviously, that means this figure is a very welcome addition.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  Unlike his pack-mate, his sculpt is completely new.  It’s quite an impressive piece of work, with lots of separately sculpted pieces that just give the whole figure a ton of depth.  I love the helmet, especially the way they’ve handled the eyes; they’re a separate piece from the actual mask, so it looks like there’s really a whole face under there.  The vest and his “fighting fists” are likewise separate pieces, although in this case they’re removable.  The vest isn’t really meant to be removed, though, so the underlying torso’s a little off.  The figure’s legs also end up looking a little bit wonky, but that’s about the only complaint I can come up with, and even that’s a rather minor one.  Crossbones’ paintwork is fairly decent.  A lot of it’s very subtle, with just some slight variations of black and dark brown.  The white parts stand out quite well, though, and I love how the eyes turned out.  Crossbones is packed with an extra un-masked head, depicting his scarred visage from the film.  It’s actually a little bit toned down from the movie, but close enough to get the point across.

THE ME HALF OF THE EQUATION

Cap and Crossbones are actually the last of these figures that I got, though they were still picked up for me by my Super Awesome Fiancee.  They arrived at her work about a week after the others.  This set was second on my list, after Ronan.  Crossbones was just a really cool design that I really wanted a good figure of, and I was hopeful that the second try at the Civil War Cap would be much better.  Crossbones lives up to my expectations, no denying that.  Cap?  Well, like the last several MCU Caps I’ve gotten from Hasbro, he’s frustrating.  Sure, the new heads are awesome, but saddling him with the same old body is super weak, and prevents him from being the definitive Cap I was really hoping for.  I guess there’s always Avengers 4

#1757: Ronan

RONAN

MARVEL LEGENDS — MARVEL STUDIOS: THE FIRST TEN YEARS

An avid loyalist to the Kree whose family was killed by the Kree-Nova War, Ronan agrees to a partnership with Thanos in order to take down the Nova Corps on Xandar once and for all.

Sent on a mission by Thanos to recover the mystical entity known as the Orb, Ronan discovers that the target he seeks is in fact an all-powerful Infinity Stone.  Ronan uses the stone to destroy the Nova Corps’s fleet, but is ultimately destroyed by his own greed when the Guardians of the Galaxy take the Orb back and use it to entirely obliterate him.”

I *almost* posted the Thor review today.  How foolish I was.  It’s okay, I’m looking at another tall, hammer-wielding dude from space, Ronan the Accuser!

The first Guardians had decent Legends coverage, but with quite a sizeable cast, there were more than a few notable missing players.  The Vol. 2 figures got us Yondu and Nebula, but the team’s main antagonist wasn’t quite so lucky.  Fortunately, he got in on this anniversary business.  Lucky him!

THE FIGURE ITSELF

Ronan is entry 6 in the Marvel Studios: The First Ten Years sub-line of Hasbro’s main Marvel Legends line. Like Red Skull, he’s one of the three standard single-release offerings (Mark VII Iron Man is the last of the three).  Ronan stands 7 inches tall and he has 30 points of articulation.  The figure is sporting an all-new sculpt, patterned on Ronan’s design from the movie.  The sculpt, not unlike Ronan’s design from the movie, is not without its quirks.  The biggest of these “quirks” is to do with his head piece and shoulder pads.  They are done here as one single piece, connected to the top of his head.  This has the unintended side effect of giving Ronan a very strange appearance should you decide to move his head, as his shoulder pads will be traveling with it.  It’s a very odd choice, but in the defense of this figure, it seems to be firmly rooted in the actual costume design, since Lee Pace wasn’t moving his head much in the movie either.  At least this way he still technically has all of his motion unencumbered, right?  Apart from that, the sculpt is actually pretty strong.  The texture work on his costume is nothing short of astonishing, capturing all of the various textures of his costume from the movie.  It also captures his rather imposing build, which means he looks appropriately menacing next to the rest of the Guardians.  If I had one other complaint about this figure’s sculpt, I’d say it’s the way the mid-torso joint’s been worked into the sculpt.  It’s a little bit obvious and slightly cumbersome.  The other articulation is worked in fine, though, so I can’t complain.  Ronan’s paintwork is overall pretty decent.  Not quite a subtly handled as some of the other recent MCU figures, but a bit of a step-up from the original Guardians offerings.  His eyes are really purple, signifying that this is a post-stone-powered Ronan, which makes him the best for fighting all of your Guardians.  Ronan is packed with his hammer, suitable for accusatory purposes.  It matches up with Ronan’s powered-up eyes, featuring the power stone mounted on one side.  It’s a shame yesterday’s Red Skull didn’t come with the Tesseract, since we could have assembled a bunch of the stone.  Oh well.  Ronan himself feels a little bit on the light side, with just the one extra, but I don’t know what else he could have gotten.  I suppose his larger size makes up for it a bit.

THE ME HALF OF THE EQUATION

I’ve always had a soft spot for Ronan, so I was a little bummed when he was left out of the assortment for the first movie (it didn’t help that I had missed out on the comic-based Ronan Legend from a few years prior).  Needless to say, I was delighted when he was announced to be part of this line, and was definitely at the top of my list.  Fortunately, Super Awesome Fiancee had my back, and grabbed him for me from my work.  Ronan may not be a perfect figure, but he’s a very good one, and one I’m very, very happy to finally have in my collection.

#1756: Red Skull

RED SKULL

MARVEL LEGENDS — MARVEL STUDIOS: THE FIRST TEN YEARS

Obsessed with the power of the Tesseract, Johann Schmidt teams up with Dr. Arnim Zola to create a super-charged arms force that will change the fate of World War II…and the world.

Hydra leader Johann Schmidt creates Tesseract-powered weapons to destroy American cities, but doesn’t anticipate interference from newly-dubbed hero, Captain America.  In their first meeting, Schmidt removes his mask to reveal crimson skin, a signature that has earned him the name ‘Red Skull.'”

The MCU has run through an interesting period when it comes to tie-in toys.  Iron Man kicked things off with some Legends-esqe figures, which were a decent hit with the fanbase.  By the time of IM2, Hasbro was in the midst of their push for 3 3/4 inch figures, so it, and all of the movies up to Captain America: Winter Soldier would be in that smaller scale, with only a few choice offerings at the larger scale.  The recent shift has been completely to the Legends scale, but thanks to the rapid pace at which the MCU films hit, there are more than a few prominent characters missing from the line-up.  In honor of the MCU’s tenth anniversary, Hasbro’s put together a special sub-line of Marvel Legends, devoted to celebrating those prior films.  I’m kicking things off today with a look at one of the most prominent missing villains, the Red Skull!

THE FIGURE ITSELF

Red Skull is entry 2 in the Marvel Legends — Marvel Studios: The First Ten Years sub-line of figures.  He’s one of the three standard single-packed figures in the line-up, alongside the Mark VII Iron Man and Ronan the Accuser.  This figure gives us Red Skull in his more basic Hydra uniform, as he’s seen inside the Hydra base during several sequences of the film (there’s also a long-coated variant, which was offered at SDCC this year). Perhaps not his coolest look, but there’s a good reason for this choice.  He stands 6 inches tall and he has 29 points of articulation.  He’s sporting a brand-new sculpt, which is a pretty solid recreation of Skull’s look from the movie.  The head has a teeth-gritting expression, which is always a nice throw-back to the Skull’s earlier comics design.  Thanks to it being released 7 years after the fact, it’s also able to be far more accurate to the film’s Skull face than it would have at the time of the movie, so hey, bonus!  The body captures his uniform pretty well, though the articulation is perhaps not as worked into the sculpt as I might like. It’s especially noticeable at the mid torso joint; I feel an ab-crunch might have worked a little better there.  That said, it’s hardly the worst implementation of articulation I’ve seen.  He’s still got decent mobility, and the sculpt isn’t too terribly broken because of it.  The paintwork on this guy is pretty usual fare for an MCU release.  It’s pretty cleanly applied, and matches well to the movie.  The head actually gets some pretty subtle accent work all throughout, so that it’s not just a big chunk of bright red plastic with some eyes.  Speaking of eyes, the ones on this figure are using the printed technique, which doesn’t have quite the same impact here that it does on more human looking figures, but it does still make at least some difference.  Remember up at the top, when I said there was a good reason for this figure’s costume choice?  Well, the accessories are where that comes into play.  Skull doesn’t get anything character specific, but he does get three extra heads, a tactical harness, a Hydra gun, and an extra hand, allowing him to be turned into a few different configurations of the Hydra Soldier.  Sure, the uniforms aren’t quite an exact match, but they’re close enough to work in a pinch, and it’s really the thought that counts.  As an added bonus, if you’ve got any of the Black Series FO Officer bodies laying around, with a tiny bit of modification, they work pretty well for quickly building an army.

THE ME HALF OF THE EQUATION

Red Skull was purchased for me by my Super Awesome Fiancee.  She got a few of the Marvel Studios sets in at her work, and was kind enough to grab them for me.  First Avenger was my favorite of the Phase 1 films, so I was always rather saddened that it seemed to draw the short straw when it came to toys.  I’m glad that Hasbro’s been able to go back and retroactively amend that.  Red Skull isn’t a perfect figure, but I’d say he’s a fair bit better than he would have been had he been released at the time of the movie.  The added Hydra Soldiers pieces are just icing on the cake.  Now I’m resisting the urge to buy multiples…