Tag Archives: Minimates

#1190: Daredevil & Punisher

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DAREDEVIL & PUNISHER

MARVEL MINIMATES

ddpunisher1

Today marks the penultimate post-Christmas review for 2016.  This review is more or less a continuation of yesterday’s.  I’ll be looking at the remaining Marvel Minimates based on Netflix’s Daredevil series.  Yesterday’s set was heavy on the civilian looks, but this set turns things around, giving us Daredevil’s official, more superhero-y costume, as well as his fellow Hell’s Kitchen vigilante, Frank Castle, aka the Punisher!

THE FIGURES THEMSELVES

DD and Punisher were released as an exclusive two-pack at SDCC 2016.  They served as a way of hyping up the rest of the Netflix-based sets, as well as tying into the recently released second season of Daredevil.  The set was supposed to get a wider release following the, but some issues with misplaced product in one of Diamond’s warehouses meant that a good chunk of the sets didn’t arrive until almost the end of 2016.

DAREDEVIL

ddpunisher2After spending 13 episodes in Season 1 sporting the all-black number seen yesterday, the final battle of the season finally gave DD his more familiar red getup.  This figure isn’t *quite* that version, but is instead based on his look from the back 3/4 of Season 2, after a stray bullet from the Punisher cracks his original helmet and he has to get a replacement.  The differences are negligible, really, but it’s still important to note.  The figure uses the standard ‘mate body, and as such stands about 2 1/4 inches tall and has 14 points of articulation.  He’s got add-ons for his mask and thigh holster.  The holster is the same piece seen on yesterday’s Season 1 DD (though flipped to the other leg, as it was in the show), but the mask is all-new to this particular figure.  It’s a decent enough translation of his second mask, though the forehead section seems a little too tall.  It’s a minor enough issue not to really bug me.  His paintwork is far more complex than any of yesterday’s ‘mates, and does a pretty solid job of capturing the suit seen in the show.  The colors are a good match, and all of the line work is nice and sharp.  Under the mask, there’s another Matt Murdock face, this time a bit more intense than either of the two in yesterday’s set.  It’s perfectly fine (the stubble in particular is very impressive), but something about this particular expression messes with the likeness a bit; I’m not seeing much of Charlie Cox in there.  DD is packed with his billy club (the same pieces as the eskrima sticks, but in red this time), an extra hairpiece for an unmasked look, and a clear display stand.

PUNISHER

ddpunisher3Frank Castle serves as the antagonist for the first several episodes of Daredevil’s second season, before becoming something of a dueling protagonist as the season progresses.  Season 2 was admittedly a slight step down from the show’s first season, but Jon Bernthal’s turn as the Punisher was easily the high point of the season, and this is coming from a guy who’s never really liked the Punisher.  His presence as the second half of this pack is far from surprising.  Frank spends most of the season in rather normal clothes, but does finally dawn a pretty straight forward Punisher costume during the second season finale.  It’s only on-screen for a few minutes, but it’s a pretty distinctive look.  Punisher uses add-ons for his hair and  coat.  The hair is a new piece, specifically designed to replicate his close-cropped style.  It does alright in that respect, though I feel like something more along the lines of the Red Hulk hairpiece might have done the job a bit better.  The coat is the long coat piece first introduced way back in 2007 on the very first Doc Brown, and it’s a nice, basic piece, which does its job pretty well.  Punisher’s paintwork is more on par with the Season 1 set than DD, being mostly a lot of black.  That being said, there’s a lot of really great detail work on the front of the torso and the belt.  He also has a pretty good likeness of Jon Bernthal, and the detailing on his hair even continues under the hair piece, allowing for him to be displayed with his closer cropped ‘do from earlier in the season (even if he’s not wearing the right jacket and shirt).  In terms of accessories, Frank is packed with a spare set of arms with rolled up sleeves, a machine gun, two handguns, and a clear display stand.  I wouldn’t have minded getting the larger rifle he uses during the final battle with the hand, or even the mini gun he was seen carrying at the very end of the finale, but I guess this assortment works alright too.

THE ME HALF OF THE EQUATION

Since I didn’t attend SDCC, I couldn’t pick up this set in person.  I also missed out on the initial supplies that hit online, so I ended up having to play the waiting game.  Ultimately, they were a Christmas present from my parents (who have been supplying me with pretty much all of my Minimates as of late).  This is a great counterpart to yesterday’s set, and gives me another two of my favorite characters from one of my favorite shows!

#1189: Daredevil Season 1

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

MATT MURDOCK, FOGGY NELSON, WILSON FISK, & CLAIRE TEMPLE

MARVEL MINIMATES

ddseasonone1

For day 22 of my post-Christmas reviews, I’m heading back over to the world of Marvel Minimates.  Said Minimates are my first venture into the merchandising for Marvel’s widely successful Netflix shows.  The first (and in my opinion, the best) of those shows is based on Marvel’s resident Man Without Fear, Daredevil.  His show’s success took a lot of people by surprise, especially merchandisers, including DST, who had no plans for any Minimates from the show until well after it started streaming.  Fortunately, they picked up the license for the Netflix stuff last year, and have gotten to work offering some boxed sets, each based on one season of one of the shows.  Up first were Daredevil and Jessica Jones, the former of which I’ll be looking at today.

THE FIGURES THEMSELVES

Matt, Foggy, Fisk, and Claire are all based on their Season 1 appearances on Daredevil. The set was released in November of last year.

MATT MURDOCK

ddseasonone3Up first, the show’s titular character.  Of course, the box only refers to him by his real identity of Matt Murdock.  It’s fitting, since this is his Season 1 prototype costume, and he hadn’t yet fully embraced the name until a ways into the season.  The costume is a departure from the usual red togs from the comics (or even his red and yellow first appearance costume, of which I am a huge fan), but it’s not without its roots in DD history, being inspired by both his prototype costume from Frank Miller’s Man Without Fear and his costume from his first live-action appearance in “The Trial of the Incredible Hulk” back in the ‘80s.  Matt is built on the usual Minimate body, with add-ons for his mask, belt, and leg holster.  All three add-on pieces are reused, with the mask coming from Iron Fist, the belt being a standard piece, and the holster being introduced with the Series 43 Daredevil.  All of the parts are good fits for his ddseasonone2on-screen design, and the costume translates to Minimate form exceptionally well.  While the paintwork is mostly just flat back, he does have a fully detailed torso, with subtle highlighting to show off his musculature, as well as the tiny bit of red piping on the shoulders.  Under the mask, there’s also a fully detailed Matt Murdock face, with a pretty solid likeness of Charlie Cox.  For his base look, DD includes his wooden eskrima sticks, given to him by…Stick, as well as the usual clear display stand.  He also includes a spare head, hair, torso, tie, suit jacket, hands, and walking stick, allowing you to turn him into a civilian version of Matt.  Supply your own arms and legs, and you’ve got yourself a whole second figure!

FOGGY NELSON

ddseasonone5Matt’s nothing without his law partner Franklin P. Nelson, better known as Foggy.  Foggy’s a pretty major part of Season 1 and the DD mythos as a whole, so his presence here isn’t a huge surprise. The ‘mate’s really just another guy in a suit, but that’s true to the character, so you can hardly blame DST there.  Foggy uses the same basic pieces as Matt’s alt look, as well as the hair from Series 39’s Thor, which is actually a better fit for Foggy than it was for Thor, if I’m honest.  The pieces add up to a decent enough Foggy, so that’s good.  Foggy’s paintwork is once again pretty basic, but the colors are rather unique, and everything is pretty cleanly done.  He’s packed with a briefcase and a tan messenger bag, as well as a clear display stand.  It might have been nice to get some extra shirt sleeves for him, since the pink is rather unique, but it’s not like he comes with nothing.

WILSON FISK

ddseasonone4Season 1 is as much an origin story for Wilson Fisk (better known in the comics as the Kingpin) as it is for Daredevil.  He’s the main antagonist for the whole season, and it would be silly to leave him out.  That being said…he’s really just another guy in a suit.  An important guy in a suit, but still.  He uses two add-ons: his coat/shirt and a waist riser piece to make him a bit taller.  He’s still lacks some of his show counterpart’s intimidation factor, but there’s only so much you can do, right?  The coat is re-used from 24’s Tony Almeida, and its a good fit for the types of suits he wore on the show.  Paint’s once again a lot of black, but he has a slight splash of dark blue for the shirt, as well as a pretty decent likeness of Vincent D’Onofrio as Fisk.  Fisk includes a clear display stand, and that’s it.

CLAIRE TEMPLE

ddseasonone6Effectively the Coulson of the Netflix shows (being the connective tissue that holds them all together), Claire Temple started out in the comics as a Luke Cage supporting character, which made her turning up in the first season of DD a slight surprise.  Her being in this set of Minimates is also a *slight* surprise, since there are a number of characters more prominent than her in the first season (Karen was held back for the Season 2 set, which is fine, but Ben’s another pivotal character still missing.  Of course, he would have been another guy in a suit, so…).  Of course, releasing her here frees up some space in the other sets, so I guess that’s good.  She’s seen here in her “Night Nurse” garb that she’s wearing when she and Matt interrogate a thug on the rooftop.  It’s probably the most visually interesting of her looks, so it’s a good choice.  In her basic layout, she has Lady Sif’s hair, which is a reasonably close match to Rosario Dawson’s hair in the show, and Amy’s hoody.  Her paintwork is a bit more exciting than the others, with like five whole colors.  The application’s all pretty clean, which is always good.  The likeness on the face is a passable Dawson likeness.  It’s maybe sits a tad too high on the headblock, but that’s my only real complaint.  She includes a knife and a clear display stand, as well as a pulled up hood, and an extra head and hands, so as to complete her disguised look from when she was interrogating the guy.

THE ME HALF OF THE EQUATION

This set was another Christmas present from my parents.  It’s a set I’ve been patiently waiting for, since I really loved DD Season 1.  I know I ragged on this set a bit for being guys in suits, but that’s more because guys in suits aren’t the most exciting things to review.  The actual figures are really a lot of fun, and this set is really worth it just for DD alone.  That guy’s definitely one of my new favorite ‘mates!

#1187: Mandroid & Blizzard

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

MANDROID & BLIZZARD — DONNIE GILL

MARVEL MINIMATES

mandroidblizzard1

Today, I’m making my way into the final five of the 2016 post-Christmas reviews, and wrapping up the last of my Marvel Minimates Series 69 reviews in one fell swoop.  I’ll be taking a look at the series’ resident army builder (boy has it been a little while since we’ve gotten one of these guys, especially a comic-based one) the Mandroid, as well as Iron Man baddie Blizzard!

THE FIGURES THEMSELVES

There are two Mandroid/Blizzard sets in Series 69.  The one seen here has the more heavily packed Donnie Gill version of Blizzard, but there’s also a variant set featuring Donnie’s predecessor Gregor Shapanka, which is packed one-per-case.

MANDROID

mandroidblizzard2The Mandroid is a ‘mate that’s been a long time coming.  It was first shown off as one of the potential choices during the big Series 50 fan-poll back in 2012, but was beaten by the Nova Corpsman.  We’ve actually seen a good chunk of the losing characters from that poll in the last five years, but the Mandroid is the first of the losing army builders to make it plastic form (I’m still pulling for classic Multiple Man), so good for it!  The figure stands about 3 inches tall when fully armored up, and sports 11 of the 14 usual points of articulation.  The Mandroid depicted here is more or less the classic version of the armor.  It’s a little bit more kibble-y than usual, but the armor tended to vary from appearance to appearance, so this sort of aims to capture the essential elements.  Amazingly enough, the Mandroid has been constructed entirely out of re-used pieces.  He’s got the helmet/chest of Nemesis, the hands of Iron Monger, and the upper arms, upper legs and feet of the Age of Ultron Hulkbuster.  Despite the pieces being from a span of  nine years, the actually mesh together pretty well and make for a pretty solid take on the Mandroid armor.  In terms of paint, the Mandroid is a whole lot of gold.  It’s a nicer gold than some of the earlier ‘mates to use the color, and hopefully this one won’t wear off like some of those.  Also, there’s actually more than one gold present here, which keeps things from getting too boring.  Remove the armor, and there’s a fully detailed figure underneath, showcasing the SHIELD Agent piloting the suit. But it’s not just any SHIELD Agent!  DST Rep Zach Oat confirmed at NYCC that this is none other than Agent Phil Coulson, making his third appearance as a ‘mate.  We had yet to receive a comic version of Phil, so it’s cool that they threw him in there.  The Mandroid is packed with an extra gun hand (taken from Alpha Flight’s Box), plus and extra hair piece, flesh colored hands, and grey feet to turn him into Coulson.  He also gets the usual clear display stand, but the coolest extra by far (for me, anyway) is the coffee mug with the SHIELD logo on it.  This was first shown on Jasper Sitwell’s control art, but ultimately cut.  It’s great to see DST finally got it out!

BLIZZARD

mandroidblizzard3You know how I said it’s been a while since we’d gotten a proper comic army builder?  Well, it’s been way longer since we got any Iron Man foes.  The last comic Iron Man villains we got were back in Series 36, almost 7 years ago.  Fortunately, Blizzard’s one of his cooler looking (heh) foes, and makes up for some of the lost time.  Here’s hoping more foes will follow!  Blizzard is a classic vanilla ‘mate, which makes sense, since his costume’s never really been anything but a basic spandex suit.  As such, this figure is really carried by the paint.  Fortunately, the paintwork is pretty solid.  The white and blue contrast nicely with each other, and the detail lines are all pretty sharply defined.  Sometimes, there’s a bit of bleed through under light colored paints, but not on Blizzard, showing that they actually took the time to apply the proper number of coats!  Yay for learning!  Blizzard includes a number of ice effect pieces, including an ice blast and ice sled (both borrowed from Series 59’s Iceman), as well as an ice fist (one of the Thing’s fists, remolded in clear plastic; it works surprisingly well).  The ice fist I got is a right hand, but DST actually produced both right and left and packed in one at random, so if you get two Blizzards and are particularly lucky, you can give him some ice-y boxing gloves!

THE ME HALF OF THE EQUATION

Like the last two days of sets, this pair was a Christmas present from my parents.  I didn’t think much of this set when the series was initially announced (I was a bit distracted by the other sets), but I’ve always kinda liked Blizzard, and the Mandroid is an essential piece of any SHIELD display.  Both of these ‘mates could have been rather dull, but the execution makes them both really fun to play with, and the accessories really give them both that extra punch.

#1186: Falcon & Tigra

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

FALCON & TIGRA

MARVEL MINIMATES

falcontigra1

Following yesterday’s lead, today I’ll be looking at another set of figures from the latest comic-based series of Marvel Minimates, which is heavy on the classic Avengers theme this time around.  Today’s set gives us another take on one of my favorite parts of the Captain America mythos, Falcon, as well as recurring Avenger and all-around under-appreciated character Tigra.  Yes, that’s right, they packed the bird person and the cat person together.  Clever DST.  Clever.  Onto the figures!

THE FIGURES THEMSELVES

Falcon and Tigra are both part of Series 69 of Marvel Minimates, officially dubbed the “Most Wanted” series.  These two are something of an odd pairing for their main universe counterparts (aside from the cat and canary gags), but it’s worth nothing that the two were sort of an item in the 1999 Avengers: United They Stand cartoon, for what that’s worth.  It’s worth a lot to me, but probably not much to others, since I think I’m like one of two people in existence who even remembers that show.

FALCON

falcontigra2Man, remember when it was a really big deal when Falcon finally got his first ‘mate in Series 54?  In less than three years, he’s gone from no Minimates to a whopping 6 of them!  Not bad!  So far, most of Falcon’s ‘mates have skewed more modern, but this one goes back to his early days.  Well, not his earliest days, with all the green and yellow and the total lack of wings.  No, this would be Falcon’s second costume, which is the one that set the tone for all costumes to follow.  Falcon stands about 2 1/4 inches tall and he has the usual 14 points of articulation.  Structurally, he’s the same as his Series 54 counterpart.  Same hair, same wings.  He’s the same person, so that makes sense.  Plus, the parts were a good fit the first time, so if it ain’t broke, don’t fix it, right?  The main difference here is the paintwork, which I have to say, is really well handled.  All of the important details of his classic costume have been translated very nicely into the Minimate form, and the details are all nice and sharp.  They’ve managed to choose the least tacky red/white combo available, which is certainly a good thing, and I really like the nice, friendly smile on his face.  Falcon’s always been characterized as a pretty easy-going guy, so I’m happy we got a more jovial expression for him (and in general, really.  Minimates can sometimes get a little on the stern side).  There are a few spots that could probably stand to be a little cleaner (the hands in particular are rather uneven), but the paint is by and large very good, and better than most of Falcon’s previous ‘mates.  Falcon is packed with his sidekick Redwing, a flight stand, and a clear display stand.

TIGRA

falcontigra4Falcon may be raking in all the Minimates these days, but Tigra here makes her Minimate debut with this figure.  Poor Tigra doesn’t seem to get much respect these days.  It’s a shame, because she’s an awesome character when written the right way, but almost none of the current crop of writers seem to be able to do that, so she’s either reduced to simple sex appeal or just shoved off to the side and totally ignored.  Perhaps she’ll make her way into the movies and get some respect there.  In the meantime, she’s got this pretty sick Minimate!  She makes use of Dazzler’s hair and Cheetah’s claws and tail (they went waaaaaay back for those parts!).  It makes for a pretty good match for Tigra’s usual depictions, showing that some times, re-use really is the best way to go.  The paintwork on Tigra is downright amazing if you ask me.  She’s one of those rare ‘mates that’s completely painted, which always looks better if you ask me.  The orange really makes her pop and the sharpness of the linework, especially on her stripes is just great.  Her facial expression is a much more intense one than Falcon’s, but it’s well-rendered and works quite well for the character.  Tigra’s only accessory is a clear display stand, but I can’t really think of any accessories she’s incomplete without, so it’s enough to make me happy.

THE ME HALF OF THE EQUATION

Like yesterday’s Black Knight and Enchantress, these two were a Christmas gift from my parents.  Black Knight may be my favorite figure from this series, but boy do these two give him a solid run for his money (if this were the first Falcon ‘mate, he’d have definitely come out on top).  Tigra is a fantastic new addition to the Avengers line-up, and Falcon is a more than welcome replacement for the Series 54 version.  Another winning set to be sure.

#1185 Black Knight & Enchantress

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

BLACK KNIGHT & ENCHANTRESS

MARVEL MINIMATES

blackknightenchantress1

It’s Day 18 of the post-Christmas reviews, and we are officially in the home stretch.  Just one more week of these things left.  You know, until I…get back to reviewing action figures after three and a half weeks of…reviewing action figures.

For today’s review, I’m getting back to one of my all-time favorite toy lines, Marvel Minimates.  Now, I must admit, I’ve been a little down on the line the last few years.  Not that the figures have been bad by any stretch (because they haven’t) but more because almost all of the focus was either totally current, event-driven stuff (like AvX, Axis, Infinity, and of course all of the movies) or heavy on the ‘90s X-Men side of things.  Series 68 was definitely a breath of fresh air, offering up a really great assortment of classic X-Men, but I was really longing for some good comic Avengers.  The last comic-based Avengers series was way back in early 2012, and even that only offered two new characters (and one of them possessing a marginal connection to the Avengers at best).  68 was great, but I wanted an Avengers series that rivaled that.  Well, as it just so happens, DST was way ahead of me.  Let’s begin with the Series 69 reviews!

THE FIGURES THEMSELVES

Black Knight and Enchantress are, as noted, part of Series 69 of Marvel Minimates, officially dubbed the “Most Wanted” series, which I certainly think is appropriate.

BLACK KNIGHT

blackknightenchantress3First up, it’s Black Knight, specifically Dane Whitman, the heroic incarnation of the character.  For me, this guy is hands down the star attraction of this series.  Something about Black Knight’s always appealed to me, and up until recently, he hasn’t really been done justice in action figure form (Hasbro’s Marvel Universe version being the one exception).  He’s based on his classic costume, which makes me very happy.  No offense to his other designs, but they always felt like rather pale imitations of his original look.  The figure stands a little under 2 1/2 inches tall and has 12 points of articulation.  He’s built on the standard ‘mate body, with add-ons for his helmet, cape, glove cuffs, and boots.  The gloves and boots are re-used pieces; they’re just basic flared gloves and boots, which work well for the character.  His helmet and cape are both new.  The helmet is spot-on to his comics helmet, and sits very nicely on the head.  The cape is okay, but could be better; it seems to lack some of the dramatic flare usually seen on Dane’s cape, and it looks like something was lost during the transition from control art to final product.  Rarely do I point out something that’s missing on a Minimate, but I was slightly disappointed that Dane just had a painted on belt, with no scabbard for his ebony blade.  It’s a fairly consistent feature of his design, so it’s a slightly odd omission.  That being said, it’s likely a cost thing, and if something was going to be cut, that was the easiest thing.  Black Knight’s paintwork is pretty standard fare for a ‘mate; the colors are all nice and bold, and most of the application good and clean.  I really like the subtle work on the scale mail.  I also quite like the face; it’s intense expression is a good match for Dane’s look on the cover of his first appearance, and it’s always great to get some variety in expressions.  Black Knight is packed with his Ebony Blade (which is the same sword included with the animated Taskmaster ‘mate from a little while back.  It’s a good enough fit for the character), a spare hairpiece for his un-helmeted look, and a clear display stand. 

ENCHANTRESS

blackknightenchantress2It hasn’t been all that long since my last Enchantress review.  It seems 2016 was a good year for her.  Maybe Marvel’s trying to stick it to DC for pushing to get their version of Enchantress to the big screen first?  Regardless of rationale, Amora’s a pretty prominent member of the Thor’s supporting cast, as well as a founding member of the Masters of Evil, and an all-around pretty cool character.  It’s about time she was given her due!  Like Black Knight, she uses the standard ‘mate body, this time with add-ons for the hair and skirt.  The skirt looks to be a standard piece, but the hair is new.  It’s a decent enough sculpt, though it does feel a tad lifeless when compared to some of the other hairpieces in this set.  Still, it looks like Enchantress and that’s really the point.  Enchantress’s paintwork is actually quite impressive.  All the details are very sharp, and there’s a lot of really cool small detail work, especially on the arms and legs.  The face does a really nice job of capturing that alluring, yet still devious look that she’s prone to sport in the comics, and really sells just who this ‘mate’s supposed to be.  Enchantress includes two green effects pieces and a clear display stand.

THE ME HALF OF THE EQUATION

Black Knight and Enchantress were a Christmas gift from my always supportive parents.  As I noted above, this is a series I was really looking forward to, and this set in particular was my most anticipated.  Black Knight’s been pretty high on my Minimates wishlist for a good long while, and I’m beyond psyched to finally have him.  He certainly didn’t disappoint.  Enchantress is no slouch either.  While she may not have quite the same coolness factor as Dane, she’s an essential character, and DST did a great job translating her into ‘mate form!

blackknightenchantress4

#1174: Armored Personnel Carrier

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ARMORED PERSONNEL CARRIER (W/ LT. GORMAN)

ALIENS MINIMATES

apcmini1

Okay, I’m kicking off the second week of post-Christmas reviews the same way I kicked off the first: Aliens.  This time around, I’m turning my focus back to Aliens Minimates, because I just haven’t reviewed enough of either of those things in a while.  One of the advantages of the smaller scale of Minimates is the ability to produce vehicles and such to go with the figures.  Due to licensing restrictions, Marvel, DST’s flagship license, is strictly just the figures, but other lines are fair game, including Aliens.  That’s a definite plus, because the Alien-verse has some pretty awesome vehicle designs just begging for some cool toys.  One of my all-time favorite vehicles from the movies is the Armored Personnel Carrier, or APC for short.  I’ll be looking at the Minimate-ized version of that today!

THE VEHICLE ITSELF

apcmini3There are two versions of the APC currently available in the Aliens Minimates line. I’ll be looking at the regular version, which is the specialty release, but there’s also a battle-damaged version available at Toys R Us.  The APC measures 2 1/2 inches tall, 7 3/4 inches front to back, and 3 3/4 inches from side to side.  Both turrets rotate, as do all four wheels.  The top turret doesn’t slide up and down like it does in the movie, likely due to the size and price of this set, but it can be popped out and placed on the back, simulating its movement from the movie.  The door also opens.  It’s not as far as in the movie, but it’s enough that it’s a cool touch.  The apcmini7sculpt of the APC is pretty good.  It’s noticeably less deformed than some of the prior vehicles, which I’m quite pleased with.  Obviously, it’s downscaled ever so slightly, but not incredibly so; it’s quite a sizable vehicle.  The top of the Carrier is hinged, allowing access to the interior of the vehicle.  It’s at best an approximation of the actual interior seen in the film.  That being said, it’s totally acceptable, since the interiors we see on screen were a separate set that didn’t actually fit in the vehicle used for exteriors.  Any recreation by definition must make some concessions.  Gorman’s station is there, with a swivel chair and everything.  There are four more seats: the driver, right behind the driver, by the door, and apcmini4towards the back.  All four of them are removable, allowing for some extra space if need be.  There’s also a small weapons rack in the back of the vehicle, which can hold two pulse rifles and two flamethrowers.  It’s a little hard to get to (it can be removed with a bit of finagling), but still a nice little touch.  Paintwork on the APC is minimal, but well handled.  There are also a few small decals to help fill in a few more of the details.

THE FIGURE ITSELF

apcmini2Included with the APC is Lt. William Gorman.  Given that Gorman spends perhaps the most time in the APC of anyone in the movie, he’s a good choice.  This is Gorman’s second time as a Minimate, with the first being as part of the third TRU-exclusive series.  However, that figure was based on his briefly seen dress uniform, where as this one is based on his main fatigues look from the film.  He stands 2 1/2 inches tall and has 14 points of articulation. Gorman uses the standard Minimate body, with add-ons for his hat and belt.  Both of these pieces are re-used, but they fit very well for the character.  The paintwork on Gorman is overall pretty solid; he’s on par with the rest of the line.  The face is the same one seen on the TRU version, which is good for consistency.  The patch on his shoulder still incorrectly reads “USMC” instead of “USCM,” but at this point, I guess they just want all the patches to match.  More power to them.  Gorman includes an extra head, sporting the bandage he’s got for the second half of the film, as well as a handgun, and a clear display stand.  I wouldn’t have minded getting the jacket he has when they first arrive on LV-426, but I can’t say I’m disappointed by the selection at all. 

THE ME HALF OF THE EQUATION

Since Aliens Minimates were announced, this was an item I was looking forward to getting.  When they finally showed off the prototype, my excitement only increased, and I’ve been eagerly awaiting it since.  I ended up getting this set from my parents for Christmas.  I’m quite pleased with the final product, and it’s definitely become the centerpiece of my Aliens Minimates collection!

apcmini6

#1159: ODST Rookie & Spartan Hayabusa

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

ODST ROOKIE & SPARTAN HAYABUSA

HALO MINIMATES

odsthayabusa1

Hey guys!  For today’s review, I’ll be doing something just a little bit different.  Today marks mine and Super Awesome Girlfriend’s third anniversary, and in honor of the occasion, we’re going to being partnering up for a review!  We’ll be looking at something that combines two of our favorite things: Minimates and Halo!  The set in question is ODST’s main character Rookie and Halo 3’s Hayabusa armor.  I’ll be looking at the Rookie, and Super Awesome Girlfriend will be following up with the Hayabusa. 

Ready Super Awesome Girlfriend?

Yes? O.O

Close enough!  Let’s see how this goes!

THE FIGURES THEMSELVES

The Rookie and Hayabusa were released as part of the fourth TRU-exclusive series of Halo Minimates.  Both of them are exclusive to this particular two-pack (though there was another Hayabusa released later in a different color scheme).

ODST ROOKIE

odsthayabusa3It’s no secret (Seriously, it’s no secret at all, he geeks out about the armor every time he see it!) that I’m quite a fan of the ODST design.  Recently (well, several months ago, but within the last year), I played through Halo 3: ODST and it’s probably my favorite game in the series.  The only ODST proper to get released as a Minimate was the Rookie.  He’s not my favorite member of the ODST squad from the game (I didn’t really care for him either…), but he’s certainly better than nothing (and still plenty cool).  The Rookie stands about 2 1/2 inches tall and he has 12 points of articulation (the boots remove the ankle articulation).  The figure uses the usual Minimate body as a starting point.  He’s got add-ons for his helmet, chestplate/belt, shoulder pads, thigh armor, gloves/wristbands, and boots.  It’s also worth noting that he uses the special thin waist piece created specifically for the Halo line in order to keep the belts from making them too tall.  The general quality of the sculpted pieces is pretty solid.  The helmet is the same one used on the Spartan ODST; I have some minor issues with it, but by-and-large it looks pretty good.  The rest of the parts capture the general ODST armor pretty nicely, though they do end up making him a bit bulkier than even the Spartans in this same line.  Still, independently he looks pretty awesome, and since scale’s never been totally perfect in ‘mates anyway, I don’t really mind all that much.  The paint on the Rookie is rather on the dull side, but that’s actually accurate to his in-game design, so that’s not a knock against him.  The application is overly pretty clean.  Not the sharpest work ever, but certainly not bad.  The Rookie included his signature silenced SMG, which he can hold decently enough, though not two handed as he does in the game.  I must say, it’s weird reviewing a ‘mate that predates when clear display stands were standard.

SPARTAN HAYABUSA

odsthayabusa2Wow, it’s been a while since I’ve written an action figure review! I should probably catch up…

This isn’t the first Hayabusa figure that I’ve received from Ethan. The other figure is a much larger (blah-blah inches tall? It’s about 5 —Ethan) and is the only other Hayabusa figure that I know of (riiiiiiight Ethan? Apart from color variations, yes). Like the figure above, Haya is about 2 1/2 inches tall with a whopping 12 points of articulation. He has the standard Minimate body with the special Halo waist piece, he puts anorexic skinny to shame, see why it’s different in the section above. He’s got add-ons for his helmet, chestplate/belt, shoulder pads, thigh armor, gloves/wristbands, and boots. Haya’s boots and gloves/wristbands are thinner than previous Spartan minimates. His other add-ons are obviously unique, the Hayabusa armor is much different than your standard Spartan design or any other amor variant. I really enjoy the sculpting of this figure, I believe it’s a pretty good replica of the original armor considering the size of the figure. My favorite part of the figure is the helmet, I believe it’s the most difficult piece to make true to the video game design, but they did a fantastic job of it. It’s my favorite part because it looks like the figure is sporting a white Tom Selleck mustache. I know, it’s an odd thing to note about a figure but what can I say, I’m weird that way. The rest of the armor is also pretty cool, makes him look slick and intimidating. Haya’s paint job is a magnificent shade of bright red, much brighter than other Spartan Minimates. The white accents on the helmet and shoulder pads also help to brighten the red and make the figure POP! The only thing that I’m disappointed about with this figure is that he comes with just your standard battle rifle, which is my least favorite weapon. In the Halo games you can unlock a katana to go with the armor, which would have been wonderful to have. Now, I can understand why they wouldn’t include a katana, because it might’ve been to difficult to do. However, the figure doesn’t even come with an energy sword, one that the Elite’s tend to carry, which I believe would’ve added to his badassatude and definitely shows up in many game shots of the armor. Overall, it’s a pretty stellar figure that triggers the nostalgia and the memories of the hours spent over the summer collecting all the damn skulls to unlock that armor. Some of those memories were fonder than other, all of them had cursing or some childish variant if parents were in the room, it was a difficult armor to get.

THE US HALF OF THE EQUATION

I picked up this set from Yesterday’s Fun, while on vacation this year.  I’ve got a real soft spot for the ODSTs and I knew Jess really liked the Hayabusa, so the pairing was really quite convenient.  I know I was pretty happy wth the final product.  How ‘bout you, Super Awesome Girlfriend?

I really do love this figure! Hayabusa is by far my favorite Halo armor. Me and a friend of mine spent the majority of our summer in Middle School trying to get this armor in Halo 3. It took a lot of time, cursing, and Googling to find those skulls. We spent most of our time not in finding the skulls but getting to them without dying, our older siblings and parents had a lot of fun watching us and hearing our outbursts. This armor will always hold a special place in my heart, mostly because of them memories that went with it. As for figures, I have to agree with Ethan and say that I’m happy with the final product, really happy!

#1158: Mummy Boy

Posted by Ethan Wilson in Reviews and tagged with , , ,

MUMMY BOY

NIGHTMARE BEFORE CHRISTMAS MINIMATES

mummyboy1

Merry day before the day before Christmas everyone!  As a Nightmare Before Christmas review, I had originally intended for this review to *actually* go up on Christmas Eve.  But, I’ve got a more important review for tomorrow, so this one got shifted just a day earlier on the schedule. So, I guess that’s good for those of you that like NBX?  This, like literally every NBX item in my collection, is a Minimate.  Now, I already looked at most of the main characters last year, so this time around I’m looking at one of film’s many distinctive background characters, the Mummy Boy!

THE FIGURE ITSELF

mummyboy2The Mummy Boy was released in the second series of blind-bagged Nightmare Before Christmas Minimates.  He’s one of the Hot Topic-exclusive ‘mates from this particular set.  The figure stands about 2 1/4 inches tall and has 12 points of articulation.  He uses the smaller “kid” body that was recently added to the line.  Since the Mummy Boy was pretty small in the movie, it seems like a sensible choice.  Of course, in the movie he also had a more spherical head, but at some point, you have to draw the line, lest you lose the Minimate aesthetic.  The vast majority of the “character” of this guy is covered via paintwork.  The paint is actually pretty solid on this guy.  I really like the way they’ve conveyed the texturing on the bandages, and I particularly like the fact that the style on the bandages is ever so slightly different from those on Imhotep.  It makes for some nice diversity.  Mummy Boy’s only accessory is the standard clear display stand.

THE ME HALF OF THE EQUATION

I picked up Mummy Boy what feels like forever ago, on a trip to the mall with Super Awesome Girlfriend and some of her friends.  Super Awesome Girlfriend is a pretty big fan of NBX, so I was helping her find a few of the other characters in this series.  I found one bag that I was pretty sure had the Mummy Boy inside and liked him enough that I decided to get him for myself.  This guy’s fairly standard fare for a Minimate, but I can definitely appreciate him for his simplicity.

mummyboy3

#1157: Cyclops & Wolverine

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ULTIMATE CYCLOPS & ULTIMATE WOLVERINE

MARVEL MINIMATES

ultcyclopswolv1

Minimates sure have come a long way.  There was a time when we all thought the line might just get those first three series and nothing else.  As such, many of the characters and designs represented in those early series were influenced by what was timely.  For instance, the earliest X-Men Minimates weren’t really based on any of the classic iterations of the team, but rather the just recently launched Ultimate X-Men, who also had the added benefit of having a slightly closer resemblance to the X-Men of the movies.  The characters released were also much more top tier, including today’s focus figures, Cyclops and Wolverine!

THE FIGURES THEMSELVES

Cyclops and Wolverine, like several of the other earliest ‘mates, were available in a few different ways.  The first way was as part of Series 3 of the main Marvel Minimates line, where Cyclops was paired with Jean Grey and Wolverine was paired with Storm.  They were also part of the TRU-exclusive five-pack with Storm, Logan, and Sabertooth.  The pair I’m looking at today are part of the first group of Target-exclusive ‘mates, which is the only time these two were packed together.

CYCLOPS

ultcyclopswolv3Poor Cyclops gets no respect, but the Ultimate universe certainly tried to give him his due.  On the plus side of things, he had one of the less sucky redesigns of the Ultimate ‘verse, since it pretty much stuck to his usual costume roots.  The figure stands about 2 1/2 inches tall and has 14 inches tall.  He’s built on the pre-C3 base ‘mate body, so he’s got those weird long feet.  He’s got add-ons for his hair/visor and his belt.  Both pieces are certainly good for the time.  Not quite as detailed as later ‘mates would be, but also not as simplistic.  This is definitely one of the figures where elegant simplicity comes into play.  I like how they’ve summed up all the basic elements of Cyclops with as few details as possible.  The paintwork on Cyclops is decent enough.  What’s there is mostly pretty sharp, though there are a handful of misplaced lines, especially on the boots.  Obviously, he lacks the musculature and finer detailing that we’ve come to expect on more recent stuff, which look a little off.  Of course, thanks to the darker colorscheme, it’s a lot less of an issue here than it is on other ‘mates from the same time period.

WOLVERINE

ultcyclopswolv2Wolverine is no stranger to Minimates, but this was one of the first two he ever got.  It’s kind of strange to think that neither of his first two ‘mates featured his signature mask.  It’s worth noting that this figure is sporting Ultimate Wolverine’s second costume design.  It was a sensible choice, since it not only incorporates more of his classic costume’s design elements, but also fits better with the rest of the team.   Like Cyclops, he’s built on the pre-C3 body.  He has add-ons for his hair and belt, as well as clawed hands.  The hair isn’t the classic Wolverine style hair, but that’s actually accurate to the comic.  It’s a decent enough sculpt, and it would later see re-use on the first version of Quicksilver.  The claws are an older version of the hands, and are a little more rudimentary than those of the most recent Wolverines.  They’re not awful, but the improved versions were definitely warranted. The paint work on Wolverine is decent overall, but not without issue.  Most noticeably, there’s just a splotch of fellow on his right hand and wrist, which just looks rather odd.  Still, the overall appearance is decent enough.

THE ME HALF OF THE EQUATION

Cyclops was actually one of my earliest Minimates (as part of the first three two-packs I picked up), but that was the specialty release with Jean.  Over the years, I lost a number of pieces to both of them, so they’ve been incomplete for a while now.  I ended up finding this set at Player’s Choice, a gaming and collectibles store in the local mall, a few weekends ago.  Since I was looking to replace Cyclops and I never actually owned this Wolverine, I figured it was worth it to pick them up.  They’re not a bad set.  Sure, there have been lost of subsequent releases of both characters, but for Cyclops especially, it’s truly hard to top that first release in terms of memorability.

#1153: Black Widow & Dark Avengers Iron Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

BLACK WIDOW & DARK AVENGERS IRON MAN

MARVEL MINIMATES

widowdaim1

Hey ho, it’s another Minimate review. They kind of come in clusters, I guess. Of course, where yesterday’s focus figure came from way back at the beginning, today’s is a more recent addition to the line. So, without further ado, here’s Black Widow and Dark Avengers Iron Man!

THE FIGURES THEMSELVES

This pair is part of Series 2 of the Walgreens-exclusive Marvel Minimates. As with all the Walgreens ‘mates, these two are animated series-based, specifically Avengers Assemble.

BLACK WIDOW

widowdaim2Black Widow is one of the main members of the team in Avengers Assemble, so her appearance here isn’t a huge shock, especially since they’ve been steadily working through the animated incarnation of the team. The figure is a little under 2 1/2 inches tall and she has 14 points of articulation. Widow is based on her second costume from the show, which is a bit more distinct when compared to the same basic Widow we’ve gotten a few times, so definitely a good choice. Her only add-on piece is her hair, which she shares with the previously reviewed Gamora ‘mate. It’s a nice enough piece, and I guess it matches well enough with her animated design. The rest of her design is rendered via paint work, which is pretty solid. As I’ve noted a few times before, the animated designs really do translate pretty well to the ‘mate form, and Widow definitely fits that trend. The colors are nice, bright, and bold, and all of the line work is nice and crisp. The figure is packed with a pair of batons and a clear display stand.

DARK AVENGERS IRON MAN

widowdaim3The second season of Avengers Assemble introduced frequent Marvel fixture the Squadron Supreme, who are the Marvel equivalent of the Justice League. They took advantage of the Squadron’s alternate universe to also introduce the Dark Avengers, evil counterparts to the main heroes. DST decided to take advantage of these new designs to offer some slightly more unique designs for the characters we’ve all seen so many times before. The first one was Iron Man, whose design swaps out the red portions of his armor for black, because everyone knows black = evil, I guess. Construction-wise, he’s got add-ons for his helmet, gloves, and belt, as well as special upper arm pieces. Everything is reused, which is generally okay. The Mark 42 arms still aren’t among my favorites, mostly due to serious limitations they place on the shoulder movement. Aside from that, though, he does a decent enough job of capturing the look of the armor on the show. The paintwork on this guy is passable, but nowhere near as nice as some of the others in this subset. He’s rather drab, being a dark blue and a rather cold yellow. Ultimately, he ends up looking like a slightly blander version of the Marvel Now Iron Man from a few years ago. Under the helmet, there’s a Tony Stark face, which is a bit angrier than the usual Tony. The flesh tone on the face is kind of thin, so he ends up looking rather bluish. Also, the figure’s paint just seems rather sloppy in general. The figure is packed with a flight stand and a clear display stand.

THE ME HALF OF THE EQUATION

These two were given to me by my Super Awesome Girlfriend, who bought them from a Walgreens during a trip back home over the summer. Apparently, she likes to buy things for me when she’s stressed. Widow’s a pretty solid ‘mate. Dark Avengers Iron Man is…well he doesn’t feel like the most inspired choice. Of all the Dark Avengers designs, his is really one of the less interesting, and to top it off, his paint work is noticeably lower in quality than others in the series. Overall, I think Widow’s enough to save the pack, but it would have been nice if her pack mate had been more exciting.