Tag Archives: Minimates

#0567: Captain America & Thor

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CAPTAIN AMERICA & THOR

MARVEL MINIMATES

ThorCapAvAoU1

Alright, we’re starting to get into full swing here with the Age of Ultron Minimates reviews. I looked at two of the new comers and two of the mainstays of the main team. Today, I’ll be taking a look at another set of the returning team members. Interestingly enough, it’s my favorite member of the main team and my least favorite member of the main team, packed together, Captain America and Thor. Now, hopefully the Hemsworth fans won’t kill me before I finish the review.

THE FIGURES THEMSELVES

These two are part of the first assortment of Age of Ultron Minimates. Cap and Thor were one of the two sets of Age of Ultron-themed Marvel Minimates available in both the TRU assortment and Series 61 of the main Marvel Minimates line. Mine are the specialty release, and there are a few differences between Thor in the two releases, which I’ll get to shortly.

CAPTAIN AMERICA

ThorCapAvAoU2Chris Evans as Captain America may very well be one of my favorite things about the Marvel movies. His take on Cap is on par with Christopher Reeve’s Superman in terms of definitiveness. This figure is the 7th Minimate of his take on the character. He stands approximately 2 ½ inches tall and features the normal 14 points of articulation. Cap is based on his primary look from the film, which, as I noted in my review of the Marvel Legends version of the costume, is a tweak of his STRIKE team suit from The Winter Soldier. As such, it shares many of the same pieces with Series 55’s version of that suit. The helmet, harness, and belt are all the same, and they are just as good here as they were there. The gloves are a reuse of the ones seen on the AoU boxed set’s Nick Fury figure, and they represent a closer match to the gloves from the film than the WS pieces. The paintwork on Cap is generally not bad. There’s a bit of slop in a few areas, and, like the rest of the series, the detail lines could stand too be a little darker, but he looks pretty good overall. The face has a passing resemblance to Evans, which is certainly more than Hasbro’s managed. At first, I didn’t care for the facial expression, but it’s grown on me a little. I still feel that it should commit to either a calm expression or an aggressive one. This one is somewhere in between and ends up looking a little goofy. Cap includes his mighty shield (which is the same as all the previous movie shields), a hand for it to plug onto, a spare hairpiece (which is the same as last year’s Star-Lord, among others), and a clear display stand. These are mostly good pieces, but I don’t think the hair-piece works very well for Cap. It seems he was given this one so that he, Iron Man, and the two Hawkeyes didn’t all have the same hair, but it doesn’t work.

THOR

ThorCapAvAoU3So, hey, remember in the intro when I said Thor was my least favorite cinematic Avenger? Please don’t hurt me, I can explain. See, Thor’s never been one of my favorite Avengers. Yes, he’s a founding member, but he just doesn’t fit well with the whole team thing. Now, I do love Chris Hemsworth’s portrayal of the character in the movies, and I enjoy his interaction with the others, but I can’t say I’m hurt by him having reduced screen time in AoU. Anyway, Hemsworth’s Thor has shown up a little less frequently as a Minimate, with this only being his 5th appearance in the line. Thor is just a slight bit taller than Cap, though he’s only got 12 points of articulation, thanks to the boots. Thor is based on his sans-sleeves look from the film. Seeing as it’s the look he has for both the opening and closing battles, it’s certainly well chosen. It’s also more or less the same design he had in The Dark World, and the figure uses the same selection of parts as the Series 53 Thor from that movie. I don’t actually have that figure (cuz Malekith sucks), but these pieces are all pretty decent parts, and they result in a Thor that looks like Thor. Yay. Now, for paint, it’s important to note that I have the specialty release of Thor, which, simply put, means the paint is better. The TRU Thor was missing a fair portion of the silver detailing on the torso and prevalent instances of the detail lines of the face not lining up with the colors. These issues aren’t present here. However, the figure still has a fair bit of bleed over on the major color changes, and the whites of the eyes and mouth are still the slightest bit misalligned. Also, the face on this figure doesn’t particularly capture Hemsworth’s likeness, though it is DST’s best attempt to date. Perhaps his likeness is just hard to translate. Thor includes his hammer Mjolnir, a flying base, and a clear display stand.

THE ME HALF OF THE EQUATION

Like Iron Man & Black Widow, I picked up this set from my local comicbook store. This set is a little bit more exciting than yesterday’s, I think in part due to the strength of the two figures that these two are based upon. I’m glad to have another movie Cap in a more conventional set of colors, and this is the best movie Thor that I own (and I didn’t even have to buy a Malekith to get him!). All in all, this is a pretty decent set, and a worthy update on two rather important characters.

#0566: Iron Man – Mark 43 & Black Widow

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

IRON MAN – MARK 43 & BLACK WIDOW

MARVEL MINIMATES

IM43WidowAoU1

Alright, it’s the Age of Ultron Minimates extravaganza part 2 (Electric Boogaloo)! I kicked things off with two of the film’s new characters, Quicksilver and Scarlet Witch, but now I’ll be turning back to the “old faithful” characters that we’ve seen a few times before. Iron Man is the “oldest” MCU character, and Black Widow isn’t far behind him. And look at that, they’re even packed together. How convenient.

THE FIGURES THEMSELVES

Iron Man and Black Widow are part of the first assortment of Avengers: Age of Ultron-based Marvel Minimates. They are one of the two sets in the first assortment to be available both at Toys R Us and as part of Marvel Minimates Series 61.

IRON MAN – MARK 43

IM43WidowAoU2It would be weird to have an assortment of Avengers merch without an Iron Man, so here he is. The figure is about 2 ½ inches tall and he has 12(ish) points of articulation. As noted in the name of the figure, this is Iron Man in his Mark 43 armor, which he ends up wearing for the first half or so of the film. It’s worth noting that this makes him not actually fit with the rest of the team’s final battle looks, though it does mean you can display them from the opening battle. Structurally, this figure is the same as the Series 49 Mark 42, which is rather sensible, given that the 43 was just a recolored 42 in the movie. The add-on pieces for the 42 are serviceable, and they do a decent job of replicating the movie’s armor, but they have a few issues. Chief among them is that the upper arms are sculpted in such a way that the shoulders are effectively nothing more than cut joints. That’s really limiting to the figure. In addition, the figure feels a little too built up in general. The 42/43 are meant to be rather sleek, but the ‘mates are rather chunky. All that aside, the pieces do feature some nice detail work and some nice, sharp lines. The paint on Iron Man is pretty decent, actually. In particular, the shades of red and gold that have been chosen are nice and vibrant and have a really great finish to them. The line work is all pretty decent, although it’s perhaps a touch faint. As has become the norm on Iron Men, there’s full detailing under the helmet and torso. The torso offers a cool look at the inner workings of the armor, and the head offers a look at Tony’s face. The Tony face isn’t as good as some of the previous ones; they seem to have missed the mark on the RDJ likeness. The Mark 43 includes a spare hairpiece, a rocket blast piece, and a clear display stand.

BLACK WIDOW

IM43WidowAoU3In the comics, Black Widow is a marginal member of the Avengers at best, but the movies have changed that. There, she’s upgraded herself to one of the most central members of the team. And that’s pretty cool. Her presence in Marvel Minimates is rather reflective of this change. Of the seven Minimates of the character, five of them are movie-inspired. Anyway, onto the actual figure. Widow is roughly 2 ½ inches in height and she’s got 14 points of articulation. She is, of course, based on Widow’s main appearance in the movie. Structurally, she’s similar to the Winter Soldier version of Widow from Series 55. She shares the same belt and one of the holsters, but loses the Widow’s stingers. Also, the hair has been replaced with that of Battlestar Galactica’s Pegasus Six, which is actually quite a good match for her hair from the movie. This Widow ends up being a bit sleeker than previous versions of the character, which is a plus in my book. Widow’s paintwork is certainly passable. There is a bit of slop around the edges of her arm bands, but other than that pretty much everything is clean. One thing I noticed is that the detail lines seem a little duller here than usual. Things such as the “tron lines” kind of fade into the rest of the costume, and the details on the face seem a little light. Speaking of the face, it presents a good likeness of Scarlett Johannssen, but the somewhat vacant expression is a little disappointing in light the Winter Soldier Widow’s more intense look. Widow includes two eskira sticks, a handgun and a clear display stand.

THE ME HALF OF THE EQUATION

After the craziness that was acquiring Quicksilver and Scarlet Witch, getting this set was actually rather simple: I just picked them up from my local comicbook store. I can’t say that this is a set that thrills me. The Mark 42 was not my favorite Iron Man Minimate, and the 43 still has several of the same issues, plus the step down in likeness. Widow fairs a bit better, and I do like a lot about this figure. I think that swapping the heads on this one and the Winter Soldier version might provide me with my preferred version of the character.

#0565: Quicksilver & Scarlet Witch

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

QUICKSILVER & SCARLET WITCH

MARVEL MINIMATES

QS&SWAoU1

Let me kick things off here by saying that Avengers: Age of Ultron was a really, really, really, really, really good movie. Just fantastic. If you haven’t seen it, you should do so. I’ve seen it three times and I still feel like I should see it a few more.

As a Marvel Studios movie, it is of course entitled to the usual tie-ins, specifically Marvel Minimates, one of my favorite lines. The first round of them hit just before the film’s release, so I’ll be taking a look at them over the next few days. Let’s kick things off with newcomers Quicksilver and Scarlet Witch.

THE FIGURES THEMSELVES

Quicksilver and Scarlet Witch are the Toys R Us Exclusive two-pack from the first assortment of Avengers: Age of Ultron-based Marvel Minimates. They were released to coincide with Series 61 of the main line.

QUICKSILVER

QS&SWAoU2Quicksilver gets to go first because he’s technically 2 minutes older. Also fast. The figure is roughly 2 ½ inches tall and he has 14 points of unimpeded articulation. He’s based on the character’s appearance in the film’s big climactic battle scene at the end. It’s a good choice, given that it’s the look that sees the most action. Pietro is built on the standard Minimate body, with an add-on piece for his hair. The hair was previously used on Series 58’s Young Magneto figure. Father and son sharing the same hair piece really appeals to the comic nerd in me. The hair piece is a pretty decent approximation of what his hair looks like in the movie, so it was well chosen. The rest of the design is handled via paint. There’s some good, some bad, and some just plain annoying on that front. The good is that the face features an excellent Aaron Taylor-Johnson likeness and the detailing on the torso and upper legs does a fantastic job of evoking the costume details from the movie. The annoying is that the patterns on his arms don’t line up quite right, resulting in some colors being too thin and some lines being much more jagged than they ought to be. The bad is that the brown detailing of the lower portion of his hair has been missed entirely. This leaves his hair a stark white, which isn’t accurate to his depiction in the film and also looks rather bland. As a whole he isn’t a bad looking figure, but he could be better. Quicksilver includes a dust cloud base to simulate running, as well as a more conventional clear display stand.

SCARLET WITCH

QS&SWAoU3Quicksilver may have been first, but Scarlet Witch is definitely my favorite of the twins, both in the comics and the movie. This marks the fourth time that Wanda has graced the Minimate form, beating Pietro by one. Like her brother she is about 2 ½ inches tall and she sports 14 points of articulation. The articulation here is a little more impeded than it was with Quicksilver; the hair and skirt both do their share of restricting. Scarlet Witch is also based on her final battle look, I’d gather for much the same reasons as Quicksilver. She uses the basic body, with add-ons for her hair, jacket, and skirt. All of the add-ons are re-used. The hair is from Series 50’s Songbird, the jacket is from Knight Rider’s Michael Knight, and the skirt is just one of the generic skirt pieces. They add up to a pretty decent approximation of Wanda’s film appearance. The only piece I’m not 100% sold on is the hair, just due to how it sits, but it isn’t bad. Wanda’s paintwork is actually quite good. I can definitely see Elizabeth Olsen’s likeness on the face and the outfit features plenty of great detail work. She’s even got little gold rings on her hands, which is an easily overlooked detail. Wanda’s only accessory (unless you count her brother) is a clear display stand. She feels kinda light without any extras. Something to illustrate her powers, such an energy piece for her hand or an extra head with red eyes, would have been a very welcome addition to the figure. Oh well.

THE ME HALF OF THE EQUATION

Oh boy, the story of getting these guys. Well, my local Toys R Us sold out of this set before I got there. So, I had to resort to ordering via TRU’s online store, which is really never a fun experience. The item shipped, and I got my tracking information. Like any good collector, I religiously watched the tracking, waiting to see when it would arrive. The item was marked “Out For Delivery” a whole two days before the expected delivery. Cool, I was gonna get it early. But, then it didn’t arrive that day. Or the next. Or the one after that. Another day passed and I finally called my local postal service about it. I was informed that someone would look into it, and I’d get a call back shortly. The next day, after not hearing back, I actually drove to the post office to check on things. I was informed that it was on a truck somewhere and I should come back the next morning before business hours. So, the next morning, I got there before business hours. And no one was there. So, I called them from outside the building and had a long, rather uninformative chat with someone in the back. They told me to go home and wait. Finally, these guys actually arrived, a week after going “Out For Delivery.” Yay, I guess. Anyway, I have them now. To be honest, they aren’t the most thrilling Minimates, but I like them well enough, and I’m damn sure going to enjoy them after all the stress of actually getting them.

QS&SWAoU4

#0553: Ultron & Ms. Marvel

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ULTRON & MS MARVEL

MARVEL MINIMATES

Ultron&MM1

Countdown to Avengers: Age of Ultron: 3 days remaining.

Okay, yesterday was a bit of a downer. Sorry about that. Guess not every Ultron can be a winner. But hey, things do get better from here out. And what better way to kick off that whole “Turning things around” thing than a look at one of my favorite lines, Marvel Minimates. They not only got us a good, classic Ultron, but also a Ms. Marvel to go with him. So, why don’t we take a look at them now?

THE FIGURES THEMSELVES

Ultron and Ms. Marvel were released as a two-pack in Series 19 of Marvel Minimates. 19 was released in conjunction with Series 20, and together they helped to fill some rather sizeable holes in everyone’s Minimates Avengers.

ULTRON

Ultron&MM2Alright, first up is the man (or robot) of the hour, Ultron. This is not only his very first Minimate, but also the first figure to depict his classic design, so it’s a two-fer. The figure is about 2 ½ inches tall and has 14 points of articulation. Ultron is constructed from the standard Minimate body, with the addition of a brand-new sculpted head. The piece sits a little low on the shoulders, causing a little bit of no-neck syndrome, but aside from that, it’s a rather nice classic Ultron head. It has, of course, been adapted into the ‘mate style, which works very nicely, and it includes all the important details for an Ultron head, plus a few additional texture details here and there. And check out the antennae! They’re actually where they should be! Imagine that… The paintwork on Ultron is pretty great. He’s mostly just silver, but he’s got plenty of detail lines to effectively translate his design and give him quite a bit of dimension. Also, the head is molded in translucent red plastic, with silver painted over it, which, when combined with the patch of unpainted plastic on the back of the head, allows the eyes and mouth to be illuminated. It’s not perfect, but it looks cool enough, and the patch isn’t visible from the front. Ultron included two energy blast pieces, molded in red, which can be placed on his hands.

MS MARVEL

Ultron&MM3This is really Ultron’s week, but seeing as this was a two-pack, it seems good ol’ Carol Danvers here is along for the ride. Surprisingly enough, this remains Carol’s only Minimate to date, but I have a feeling that might change soon enough. Ms. Marvel is about 2 ½ inches in height with, you guessed it, 14 points of articulation. Ms. Marvel is presented here in her second, Dave Cockrum designed costume. It was far more distinctive than her first, and it was the one she was most associated with before switching over to Captain Marvel a few years back, so it’s a good choice. The figure is built on the standard Minimate body, with add-ons for her hair and sash. The hair first saw release way back in Series 5, on the New X-Men Phoenix. It ended up finding its way on to quite a few Minimate females, but I think this actually may have been its last appearance. It’s not a bad piece, but it seems just a little too big and blocky for Ms. Marvel. I think the sash was a new piece, but I can’t say for sure. It’s well sculpted and accurate to the character regardless of its origins. Ms. Marvel features a far more detailed paintjob than Ultron, with several different colors and accents. Generally, it’s pretty good, though there are some minor issues with fuzzy lines here and there. Also, I kind of would have preferred straight black for her costume instead of dark grey, but I suppose that’s just me. Ms. Marvel included no accessories.

THE ME HALF OF THE EQUATION

This set was released right as I got back into Marvel Minimates in full force. It was picked up the day it was released from my local comic book store, Cosmic Comix. I remember being quite excited, specifically for the Ultron. It’s a pretty fun little set, and it’s still a pretty important one, too. The two figures aren’t without their flaws, but they both hold up pretty well, especially for only being released a third of the way into the line.

#0502: Vision & Quicksilver

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

VISION – MARVEL NOW & QUICKSILVER

MARVEL MINIMATES

Vision&Quicksilver1

Obviously, yesterday’s Marvel Minimates review wouldn’t be complete unless it were to be followed by another Marvel Minimates review, right? That’s just plain old sound logic right there. Obviously. So, how’s about we take a look at two pretty important Avengers who are undoubtedly certain to be thrown into super-stardom by this summer’s Avengers: Age of Ultron, Vision and Quicksilver!

THE FIGURES THEMSELVES

This pair of figures makes up another of the four two-packs released as the 19th series of Toys R Us exclusive Marvel Minimates. Unlike yesterday’s set, which augmented a boxed set, these two are just kind of stand-alones for this series. In fact, they don’t even represent the characters from the same period of time in the comics, so they aren’t even related to each other.

VISION – MARVEL NOW

Vision&Quicksilver2Vision is the next in a decently-sized of characters getting the requisite figures of their looks from the Marvel Now! re-branding. This marks the third figure named Vision in the line, but it’s really only the second figure of the “original” Vision (Vision 2.0 being a related, but separate character). While the last Vision represented the character’s classic look, this one is, as the name indicates, based on the look he received as a result of Marvel Now! For my money, it doesn’t quite live up to the classic design, but it’s not a bad look purely on its own. Vision is about 2 ½ inches tall and has 14 points of articulation. He’s built on the standard Minimate body, with an add-on for his cape. The cape is a re-use from DC Minimates Series 1 Superman. It’s a pretty straightforward normal cape piece, so it’s a fair choice. Other than that, the figure is just a vanilla ‘mate, which is pretty much to be expected for Vision. Vision’s paint is pretty spot on. The base colors are clean, and all the line work is nice and sharp. The colors could possibly stand to be a bit bolder, especially the greens, but they aren’t bad. Also, I would much prefer yellow to the gold on the figure, but that’s more of a personal preference. Vision includes a spare set of arms and legs which are translucent (to simulate his phasing abilities) and a clear display stand. The lack of a flight stand is a little annoying, but the extra limbs are pretty cool.

QUICKSILVER

Vision&Quicksilver3This marks Quicksilver’s second Minimate. He’s actually the same basic design as the last one, so this one’s more of an update than anything else. Both are based upon the character’s second, blue and white costume, which is the one he’s worn for the majority of his career, so it’s a pretty classic design. The figure is about 2 ½ inches in height and he has 14 points of articulation. He uses the standard Minimate body, with an add-on piece for the hair. The hair is re-used from one of the Wolverine Origins Wolverines. It’s something of a questionable choice. It’s not terrible, but it’s not a particularly close match. It would be nice if he’d gotten his own piece, but I guess this one works in a pinch. Quicksilver’s paint work is overall, pretty decent. The colors are nice and bold, and the detail lines are sharply applied. I do like that he has the proper black shorts that he tended to have in most depictions of the costume. Those were absent from the last Quicksilver, so it’s nice to see them here. Perhaps the only real issue with the figure’s paint is his face. Admittedly, the face is much better in person than it looks in pictures, but something about the mouth just seems really off. Maybe if he lost the dimples, it would look better. Quicksilver includes a dust cloud piece for running and a clear display stand.

THE ME HALF OF THE EQUATION

Like the last set, I got these from my local TRU (shout out to Minimate Multiverse member Ms. Marvel Fan, who helped make sure I got the set). This set isn’t perfect, but I really like it. Vision is one of my favorite Avengers, so getting a new version of him is pretty awesome. And Quicksilver offers a nice update to the original, which is a welcome addition.

Vision&Quicksilver4

#0501: Iron Man – Space Armor & Ronan the Accuser

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

IRON MAN – SPACE ARMOR & RONAN THE ACCUSER

MARVEL MINIMATES

IM&Ronan1

You know what I’ve missed reviewing? Marvel Minimates. Sure, I’ve reviewed a fair amount of figures from other Minimate lines, and a fair number of other Marvel figures as well, but it’s just not the same! As luck would have it, the latest set of TRU exclusive Marvel Minimates just started hitting stores, so new Marvel Minimates to review! First up, it’s two space-faring ‘mates, Space Armor Iron Man & Ronan the Accuser!

THE FIGURES THEMSELVES

These two comprise one of the four two-packs that make up the 19th Toys R Us exclusive series of Marvel Minimates. These two figures in particular were originally designed for the TRU exclusive Infinity tie-in set, but they weren’t amongst the four chosen for the actual set. It’s nice to see them turn up here.

IRON MAN – SPACE SUIT

IM&Ronan2Like Captain America before him, Iron Man has had quite a few Minimates in the past, but he had yet to join the ranks of the space worthy heroes. Now he’s an official member of the club, with a card and everything. Okay, there’s no card. Or club. It’s more of an “in my mind” sort of thing. Anyway, Iron Man was the other “heavy hitter” from the Infinity poll, so it’s no surprise to see that DST found a spot for him. The figure is roughly 2 ½ inches in height and he has 12 points of articulation. Tony’s had a few space armors over the years, but this ‘mate is based on the most recent one, which has made prominent appearances in the recent Guardians of the Galaxy comics, as well as being Tony’s main look in Infinity. Iron Man is built on the standard Minimate body, with non-standard pieces for the upper arms, hands, and feet, as well as add-ons for the helmet and torso armor. The figure features a fair bit of re-use from previous Iron Men. The upper arms come from the Series 35 Mark V, the hands are from Series 49’s Mark 42, and the feet are from Series 45’s Mark VII. The helmet and chest piece are both new to this figure, and both seem to be pretty great adaptations of the comic design. The re-use pieces are also pretty decent matches to the source material, which is always cool. It’s really awesome to see DST put their tremendous bank of prior IM pieces to good use. Iron Man’s paint is overall pretty good. The base colors are a little sloppy in some places, and it would be nice if the red and gold were just a little bit more distinguished. The biggest issue is one that isn’t apparent when the figure is all armored up. The underlying Stark face is set rather high on the head, resulting in a rather chubby looking Tony, and worst off all, the red paint from the helmet has bled onto the face, resulting in permanent red marks. Fortunately, these issues are hidden by the helmet, and the rest of the figure’s paint, particularly the detail work, looks nice and sharp. Iron Man includes a spare hair piece (re-used from the Series 51 Nova), a blast off base cast in yellow, and a clear display stand.

RONAN THE ACCUSER

IM&Ronan3Now we get to the real star of the set, Ronan the Accuser! This marks Ronan’s second venture into the world of Minimates, but it’s the first comic version of the character. As cool as the movie version was, it’s hard to beat the classic Ronan design. Ronan stands about 2 ½ inches tall, and has 14 points of articulation, although his head is a bit restricted by the hood. Ronan is based on his original comics design, which is the one he’s pretty much stuck with since his creation. It’s a solid piece of design work, and really holds that classic Marvel feel. The figure is built on the standard Minimate body, with add-ons for the hood/shoulder pads, belt/skirt, and glove and boot cuffs. The glove and boot cuffs are re-used from numerous classic Iron Man ‘mates. They’re pretty straightforward pieces, and they are pretty much perfect for Ronan’s look. The hood/shoulder pads and the belt/skirt are both new to this figure. Both pieces are very nicely sculpted and are pretty much spot-on for the character. The impediment of the neck movement by the hood is a little annoying, but I’m not sure how else it could be handled. Ronan features some pretty great paint work. The various greens are all very nicely chosen and all pop in their own way. The detail lines are fantastically handled, and the face in particular is perfect for Ronan. Ronan includes his signature hammer (and the head is right side up this time) and a clear display stand.

THE ME HALF OF THE EQUATION

I acquired these two from my local TRU, with the assistance of fellow Minimate Multiverse member Ms. Marvel Fan, who was super helpful in making sure I got a set. I’ve been anxiously awaiting this set’s release ever since I picked up the Infinity set, so I’m really happy to finally have them. Iron Man is a little “meh” but he’s not terrible. Ronan, on the other hand, is easily one of my favorite ‘mates in quite some time. He’s just so well done!

IM&Ronan4

#0499: Keychain Minimate

Posted by Ethan Wilson in Reviews and tagged with , , ,

ACTION FIGURE EXPRESS KEYCHAIN

PROMO MINIMATES

While Minimates’ bread and butter tends to be making tiny versions of popular licenses, that isn’t exclusively what they do. One of the big things in making Minimates a success is just getting the brand known to as many people as possible. Enter the Promo ‘mates. These guys are free Minimates, who come bagged and are handed out to attendees of the conventions attended by Diamond Select Toys. Usually, these are just blank figures in various colors, with maybe a logo. However, DST will occasionally go the extra mile and do full detailing. Such is the case with today’s feature, the keychain Minimate. (Okay, that’s not his official name. He actually doesn’t have one!)

THE FIGURE ITSELF

The Keychain Minimate was a cross-promotion between DST and frequent Minimate supporters Action Figure Xpress. The figure was given out at the AFX booth during San Diego Comic Con 2009, and then all remaining stock was sent out with orders over a certain amount on AFX’s online store. The figure is a little under 2 ½ inches tall and has 14 points of articulation. Technically speaking, the ‘mate is based on the Hunt Minimate character, created for 2007’s scavenger hunt contest. The main contrast is that this figure is clean shaven and sports a pair of sunglasses. The figure is built on the standard Minimate body, along with a new piece for the keychain. This is a different piece than the one that recently showed up with the TMNT Minimates; the loop that connects the piece to the figure is metal, like the rest of the chain, as opposed to the fabric loop we saw on the TMNT version. The newer version works a little better, but this makes for an interesting prototype for that idea. The rest of the figure’s detail is done with paint, which is decent overall, though not perfect. There were four possible colors to the t-shirt; mine’s the blue one, if that’s not immediately obvious. Generally, the paint is pretty cleanly applied. The front and back of the shirt have some nice work on the logos, and the pants feature a fair bit of detail work. The face has a minor issue with the mouth’s placement being slightly off. It’s just enough to be noticeable that it’s off, though it isn’t the worst thing ever. Odd mouth thing aside, he’s actually got an uncanny resemblance to actor Billy Zane. The shoes are probably the biggest point of contention. When the original Hunt ‘Mate was made, Diamond had somehow wound up with the rights to Chuck Taylors, so that figure had very specific, very well detailed shoes. This one had to settle for more genericized versions of the shoes, which are not as well done. The bottoms of the shoes don’t wrap all the way around and the white paint on black plastic results in some iffy looking paint. They aren’t terrible, but they pale in comparison to what came before.

THE ME HALF OF THE EQUATION

Like the Shoulder Zombie and Future Wolverine before him, the Keychain Minimate is another product of Luke’s Toy Store’s “Mystery Mate” offer. So far, I’m 3 for 3 on this thing. I was actually pretty excited to find this guy in my latest shipment from Luke’s. I never had to opportunity to get one back in 2009, so getting one now is really cool. Sure, he’s not the greatest Minimate of all time, but he’s kinda fun, and he’s a somewhat important piece of ‘mate history!

#0498: Casual Jules

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CASUAL JULES

PULP FICTION

I’ve mentioned that I didn’t get around to seeing the Kill Bill films until rather recently. In part, this had to do with the fact that, when Volume 2 was released in 2004, I was only 12 years old. However, a major player in why I didn’t seek them out in the years after the release is that when I was about 17, I had seen Tarantino’s other big film Pulp Fiction. Or at least the first hour or so of it, before I was so turned off by what was happening that I had to turn it off. A lot of people really like Pulp Fiction, but I just couldn’t get into it. So, when it was announced that Diamond Select Toys had picked up the license to do Minimates from the movie, I figured they would be one of those rare Minimate properties that I would just skip. But, as has clearly been established on this site, I am weak. Also, no matter what my opinion of the film, Samuel L Jackson is a bad-a ss M*****-F*****, so passing completely on the all of the Minimates of his character, Jules, seems unrealistic. So, let’s have a look at one of those.

THE FIGURE ITSELF

Jules was released as part of a four-pack of figures titled “Diner Showdown.” The set is based on the Diner scenes that bookend the film, and it’s exclusive to Hastings, a store which doesn’t actually have any locations near me. The figure is roughly 2 ½ inches tall, with 14 points of articulation. He’s based on Jules’s appearance in the diner scenes, where he’s wearing the clothes he received from Jimmy Dimmick, after his got a little messy. It’s certainly not the look every one associates with the character, but it’s a fun little variant, and it’s certainly goofy. Jules is built on the standard Minimate body, with add-ons for his hair and the bottom of his shirt. Both pieces are re-use. The hair was previously used on the last Jules. It’s a very good replication of the hair he has in the movie, and it’s well-sculpted and nicely detailed. The lower portion of the shirt is done with a rather standard belt piece that we’ve seen a number of times before. Essentially, it just lengthens the torso block, which is the effect they were going for. The figure’s real shining point is his paint work, which is excellent, aside from one small nit. The issue is that Jules’s t-shirt should actually have a design on it, but it doesn’t. Presumably, the design on the shirt is a pre-existing design, which would require a separate license, which seems a bit excessive for a one-off figure. Aside from that, the figure features some very clean base paint work, as well as some truly great detail line work. The SLJ likeness is truly spot-on, not just for the actor, but also for the character. The design on his shorts is also really well done, and certainly helps to make the figure a particularly unique one. Jules includes a handgun and a briefcase. He also had a coffee mug, but I got mine loose, so he didn’t have that piece.

THE ME HALF OF THE EQUATION

I fully intended not to get into the Pulp Fiction line. I really did. But, then I totally had to go and try to do something nice. See, the Kraang, from the recently launched Teenage Mutant Ninja Turtles Minimates line is something of a rarity, especially for people without a K-Mart nearby. So, when I came across a Kraang in a somewhat remote K-Mart nearly a month after most sources dried up, I picked it up, with the intent of helping someone on the Minimate Multiverse out. The guy I ended up trading with was quite eager to get a hold of the Kraang, but after a few back-and-forths via PM, we were having difficulty finding something he could trade to me in return. Finally, I just asked what he had extras of, and he said that he’d bought a bunch of Diner sets for the coffee mug pieces. So, I figured, what the heck and traded the Kraang for a Jules, sans coffee mug. Even though I hadn’t intended to get the figure, he’s actually a pretty well done ‘mate. Sure, he’s not the best ever made, but he’s of solid quality, and I got to help someone else get something they’d been looking for. And that’s what really makes it worth it.

#0496: Kill Bill Minimates – Masters of Death

Posted by Ethan Wilson in Reviews and tagged with , , ,

BEATRIX KIDDO, BILL, HATTORI HANZO, & PAI MEI

KILL BILL MINIMATES

“I’m calling you a killer. A natural born killer. You always have been and you always will be.” – Bill

I didn’t see Kill Bill when it was first released. In fact, I didn’t see Kill Bill for several years after it was released. On the outside, Quentin Tarantino’s movies never really appealed to me. But then, Diamond Select Toys got the license to make Minimates for a few of Tarantino’s films, Kill Bill among them. And, seeing as both parts were up on Netflix, I figured it was as good a time as any to watch the movies. And I really quite enjoyed them. The first two sets in the Kill Bill Minimates line were firmly based on the first film, specifically its final scene. While I certainly enjoyed the first movie, I think the second is the stronger of the two, so I was happy to see that the third set would be delving into that movie. So, let’s see how this set turned out.

THE FIGURES THEMSELVES

The third set of Kill Bill Minimates is officially titled “The Masters of Death Set.” Unlike the previous two sets, it isn’t based upon a particular scene or sequence from the movies. Instead, the theme of this set is the Bride and the three men who helped her hone her skills as a killer.

BEATRIX KIDDO

Okay, spoilers: the Bride’s name is Beatrix Kiddo. Bam! Mind blown, right? This is the second figure of Beatrix in the line. The figure is roughly 2 ½ inches tall and features 14 points of articulation, although most of the leg articulation is rendered inert by the skirt. The first Bride figure was based on her look from the first movie’s climactic battle with the Crazy 88s. This one is based on her look from the second half of the second movie, which includes the sequence where she fights Bill. It’s not quite as distinctive as the yellow tracksuit, but it’s an important look nonetheless. Beatrix is constructed on the standard Minimate body, with add-ons for her hair, jacket, and skirt. The jacket is a reuse from the Marvel Minimates Series 22 James Rhodes, which is a pretty great leather jacket piece. The hair and skirt are both new. The hair seems a little on the bulky side, but it’s not terrible. The skirt is pretty accurate to the source material; the details aren’t the sharpest, but they’re decent. Beatrix’s paintwork is overall pretty clean. The colors are nicely matched to the source material, and the leather jacket is appropriately shiny. The sash on her skirt piece shows a little bit of bleed over, however, it’s nothing too severe. The detail line work is all very sharp and clean, and the face has a passing resemblance to Uma Thurman (I thought the last one was a bit better, though). Beatrix includes her Hattori Hanzo sword with a scabbard to match, a handgun, a spare set of sleeveless arms, and a clear display stand. The sword and scabbard, it should be noted, are the same as those included with the first Beatrix, which means the scabbard is still upside down.

BILL

So here’s the guy the Bride was out to kill. It says so right in the title! Bill is presented here in all of his Bill-ish glory, depicting the character as he appears in his scenes at the end of the second movie. Though, to be fair, Bill looks about the same for pretty much all of the second movie, so this figure works for just about all of his appearances. The figure is about 2 ½ inches tall, with 14 points of articulation. Bill is constructed on the basic Minimate body, with add-ons for his hair and jacket. The jacket is the same basic suit jacket that DST had been using since way back in the Back to the Future Minimates “Enchantment Under the Sea” Marty. It’s a good, standard suit jacket, so the re-use is certainly warranted. The hair is new to Bill, and it’s a fairly decent approximation of his hair in the movie. It’s sculpted with some rather nice fine detail work and the bottom has been handled in such a way as to not impede articulation. Bill’s paintwork is pretty good. It’s sort of a subtle sort of a paint job, that looks pretty basic at first glance, but actually has quite a bit of detail. His jacket has the proper detaiing at the top, which could have easily been overlooked. His shirt is also fully detailed, with wrinkles and such, and you can even see some of his chest hair. The best part of the paint is definitely the face, which is a pretty great likeness of David Carradine. It’s very definitely Bill. Bill includes a Hanzo sword, a revolver, a bamboo flute, and a clear display stand.

HATTORI HANZO

Hattori here is the only figure in this set who hails from the first movie. That being said, his role in the first movie is pivotal to the second, and he and his work as a sword maker are brought up quite a lot in the second film. So, he’s definitely not out of place here (although being pretty much the only genuinely good person in the set does make him a little out of place). The figure is roughly 2 ½ inches in height and sports 14 points of articulation. Hattori is based on his appearance when he first meets the Bride, while working in his sushi restaurant. He uses the basic body, with add-ons for his headband, sleeves, and the lower portion of his robe. The sleeves and lower robe are both fairly standard pieces that we’ve seen many times before. They are well chosen and do their job admirably. The headband is a new piece; it’s a fairly straightforward piece, and it captures the look from the movie nicely. Overall, the figure’s paint is pretty good, but there’s one rather annoying issue. The figure’s skin tone on the body is appropriately warm and lifelike, but for some reason, the skin tone on the head is more gray. It doesn’t look right, and it clashes with the rest of the figure. Other than that, the paint is nice and clean, and the figure has some wonderful detail line work. Hattori includes one of his own swords and a clear display stand.

PAI MEI

Pai Mei is an intriguing character. He’s a very important character to the story, but his role is entirely in flashback. By the actual time of the movie, he’s been dead for some time. He also portrayed as a positive figure in Beatrix’s life, while at the same time being one of meanest characters to her in the movie. Seriously, she’s treated much better by the people who are actively trying to kill her. But, he’s key to her training, and, more specifically, her defeat of Bill. This is Pai Mei’s first Minimate, but it’s the second Minimate his actor, Gordon Liu, has received for Kill Bill. His other character, Johnny Mo was one of the Crazy 88s featured in set #2. Pai Mei is about 2 ½ inches tall, with 14 points of articulation, although, just like Beatrix, the leg articulation is restricted by the sculpted parts. Pai Mei is constructed from the basic Minimate body, with unique forearm pieces, as well as add-ons for his hair, beard, and the lower half of his robes. The robe piece and forearms are re-used from the Marvel Minimates Series 52 Mariko, and they are definitely a reasonable re-use. The beard and hair are both new to Pai Mei. They are decent pieces, though the eyebrows could stand to be a bit more distinctly separate. As it stands now, he sort of looks like he’s got a very strange haircut. Also, on my figure, the left strand of hair was stuck between his head and his torso, causing it to be misshapen. It can be fixed pretty easily, but it’s still annoying. Pai Mei has pretty good paintwork. The black/white contrast is nice and bold, and there’s plenty of fine detail work. Pai Mei includes his distinctive staff and a clear display stand. I do kind of wish he’d had a spare beard piece that could be held, but oh well.

THE ME HALF OF THE EQUATION

Like yesterday’s Godzilla set, I got these four from my very favorite Minimate retailer, Luke’s Toy Store. I was fairly excited for this set. It’s nice to have a Bill for Beatrix to… uhh… kill. And, Hattori is one of my favorite characters from the movie, so I’m definitely glad to get him. The one thing I will say about this set, is that it and the next set feel like their release order has been reversed. This set featuring both Bill and the final battle version of Beatrix kind of makes it feel like it should be the final set. But, as long as they all get released, it doesn’t really matter in what order they’re released.

#0495: Godzilla Minimate Set #2

Posted by Ethan Wilson in Reviews and tagged with , , ,

ATOMIC GODZILA, MECHA GODZILLA, HEDORAH THE SMOG MONSTER, & JET JAGUAR

GODZILLA MINIMATES

CREEEEEEEEEONK!!!!!!!!!!!! Did you hear that? That’s the sound of a Godzilla. I know it is, cuz that’s how it’s written out in all the comics! Do you know what that sound means? No, it’s not actually Godzilla. That’s the dumb talking. Obviously, the only thing that sound could possibly mean is that I’m totally about to review some Godzilla Minimates up in here!

THE FIGURES THEMSELVES

This sets makes up “series 2” of the Godzilla Minimates line, which is being handled through boxed sets, at least for the time being.

ATOMIC GODZILLA

First up, it’s the title character, Godzilla. This is the second Godzilla in the line, which isn’t surprising, given there have been two sets. The figure is about 2 ½ inches tall, with 14 points of articulation. This Godzilla, like the last one, is something of an amalgamation of a few of the “classic” Godzilla designs. The main difference between this Godzilla and the last one is that this one represents Godzilla when he uses his atomic ray, which is one of his most distinctive attacks. The figure is built using the standard Minimate body as a starting point, with a unique head, hands, and feet, as well as add-ons for the torso/tail and upper thighs. All of these pieces were used on the previous Godzilla, which is a sensible re-use. The pieces are pretty well sculpted, although the fact that the arms and legs are just basic Minimate arms is a little goofy looking. The torso piece is also a little on the simple side for Godzilla, especially when compared to the other figures in the set. The head is very well sculpted, though, so it’s definitely got that going for it. The paintwork on the figure is generally pretty good. It’s pretty straight forward, but it’s nice and clean. Plus, his back spines are molded in clear blue, which is just plain cool. The figure includes an atomic ray piece and a clear display stand.

MECHA GODZILLA

You can’t have Godzilla without having his mecha counterpart, so here it is! Mecha Godzilla is 2 ½ inches in height and he has 14 points of articulation. I’m pretty sure he’s based on the first version of Mecha Godzilla, though there were more than a few versions of the concept. The figure uses the basic Minimate body as a starting point, with a new head, hands, and feet, as well as an add-on for the torso. The pieces are all new to this figure and they are incredibly well sculpted. All of the details are nice and sharp. Just look at those rivets! Amazing! The figure’s paint is a little bit more detailed than Godzilla, with some more fine detail. Everything is nice and clean, and all the line work is really sharp. Mecha Godzilla includes a clear display stand.

HEDORAH THE SMOG MONSTER

Okay, so I don’t actually know anything about Hedorah. He’s apparently a smog monster, so there’s that. I’ve gathered that he’s one of the more minor Godzilla foes, but you have to get a few of them in to keep the line going. The figure is about 2 ½ inches tall and he has 13 points of articulation. He has unique hands and feet, as well as an add-on for the head/torso/tail. When fully assembled, the figure is really quite large. Like, so large that the package had to be specially shaped just to accommodate him. I’m pretty sure that’s a first. The sculpt is certainly unique, and very gloopy. He does look like a smog monster, so that’s a plus. As far as paint goes, Hedorah actually pretty lax on the paint work. For the most part, he’s molded in a dark green plastic. He’s got some detailing for his eyes and a few spots of brighter green. The paint is cleanly applied, and the detail work is pretty sharp. Hedorah includes a clear display stand.

JET JAGUAR

Jet Jaguar! Jet Jaguar! So, um, Jet Jaguar. How about that. See, I don’t know a whole lot about Jet Jaguar, but he’s one of my favorite parts of the Godzilla mythos. And that’s mostly because he is literally just Ultraman. And that’s totally okay. The figure is 2 ½ inches tall with 14 points of articulation. He’s built on the same body as the others in the set, with a unique head and an add-on for the shoulder piece. Both pieces are new to Jet, and they’re both pretty good translation of the Jet Jaguar design, so that’s good. Jet probably has the most complicated paint work in the set. With the most room for error, Jet does end up with a few more issues with bleed over. That said, most of the work is really great. The colors are bold and bright, and the line work is clean and sharp. Just look at that awesome grin! Jet Jaguar includes a clear display stand.

THE ME HALF OF THE EQUATION

I ended up passing on the first set of Godzilla Minimates for a variety of reasons. However, when it was announced that both Mecha Godzilla and Jet Jaguar would be in the second set, I was immediately on board. I picked this set up from my favorite Minimate retailer, Luke’s Toy Store. I really like this set a lot. The figures are definitely unique looking and very well put together. I may even go back and get the first set now!