Tag Archives: Poe Dameron

#1417: Resistance Ski Speeder (w/ Captain Poe Dameron)

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

RESISTANCE SKI SPEEDER (w/ CAPTAIN POE DAMERON)

STAR WARS: THE LAST JEDI

“An older design predating those of the Rebel Alliance, these low-altitude, high-power ski speeders use a stabilizer strut to keep balance when zipping across alien terrain.”

The Star Wars franchise has a history of introducing fun new vehicles with just about every installment.  The Force Awakens didn’t do this as much, preferring to stick with variations of some old favorites, as a call-back to the older films (I didn’t mind).  The Last Jedi looks to be meeting somewhere in the middle, giving us both old favorites and some new designs.  I’ll be looking at one of the newer creations (though, if the bio’s any indication, that’s not the case “in universe”), the Ski Speeder, which looks to be the standard Resistance transportation following the trailer’s ominous hints at the destruction of their old fleet sometime during The Last Jedi’s runtime.  Hasbro’s offering a small-scale version of the vehicle, packed with ace Resistance pilot, Poe Dameron!

THE VEHICLE ITSELF

The Resistance Ski Speeder was one of the launch items for The Last Jedi’s Force Friday II event.  It’s a C-Class-sized vehicle, and is the only one of its size at launch time.  Time will tell if that’ll change later.  In terms of assembly, this vehicle’s a bit easier than the last few vehicles.  Pop on the right wing, the stabilizer strut, and a  blaster cannon and you’re good to go.  When fully assembled, the vehicle measures an impressive 18 inches long and stands about 5 inches tall when sitting and about 8 inches when the strut is fully extended.  In terms of moving parts, there’s the landing gear, which drops out of either wing, as well as a very small rotating gun on the left underside of the cockpit.  There is *not* an opening cockpit hatch; it’s open-topped, which does appear to be accurate to the film.  The Ski Speeder is sporting all-new tooling, based on its film design. Though they may be a new design, the Ski Speeders definitely take influence from earlier ships, most notably the Rebel B-Wing, which it should be noted is one of my favorite OT ships.  I tend to like this design, as impractical as it would be in real life.  From what we’ve seen of the Ski Speeder, this toy does a respectable job of translating it into plastic.  Like a most recent SW vehicles, the Speeder looks to have been scaled down a little bit from its on-screen counterpart.  It doesn’t look to be as expensive as the AT-ACT or even the Resistance X-Wing, which is likely due to the ship’s more feasible size.  The details have also been slightly simplified, so as to better fit the line’s overall aesthetic, but once again, it seems to be a less drastic change than we’ve seen previously.  There’s still quite a bit of detail on this thing.  Paintwork on this vehicle is a step up from recent vehicles.  It’s still not quite up to the level it used to be from Hasbro, but there’s a bit of weathering and such, which keeps it from being too dull.  There’s a few action features built into this ship, though nothing particularly obtrusive.  The most obvious is are the two missiles which can be launched from the central engine.  The stabilizer strut serves as a handle, and there’s a trigger at the top of it.  It’s essentially a big gun.  Shame that they went back to hard plastic missiles; this would have been a perfect place for Hasbro to work in some Nerf.  It would literally just be a Nerf gun.  The second feature is a detaching wing.  When you press the turbine at the top of the engine, the right wing springs off, in a similar fashion to the wings on the TIE Fighter.  I’m guessing at least one of these ships is losing a wing in the movie.  The final feature is the ForceLink feature, which looks to be the same basic concept as with the figures.

CAPTAIN POE DAMERON

Oh, he’s a captain now, is he?  That’s new.  I think.  I mean, I don’t know what his rank was before, if there was one.  I’m assuming this is a promotion.  Good for Poe.  This figure gives us Poe in his casual gear from The Last Jedi.  Since he gave his awesome leather jacket to Finn in the last film, he was in the market for a new one.  Now he’s got this snazzy dark brown jacket, which makes him look not unlike Han from the last film.  Or the Fonz.  I guess cool guys have a consistent look.  I’m not complaining.  The figure stands about 4 inches tall and he has 5 points of articulation.  The sculpt is all-new to this guy; nothing re-used from any of the prior Poes.  The proportions are all well-balanced, and the detail work is all quite sharp.  I dig the texture on the jacket.  We’ve gotten yet another stab at an Oscar Isaac likeness on this new head sculpt.  It’s not awful.  It’s closer than earlier attempts, I think.  His cheeks are definitely too pronounced, which makes him look ever so slightly like a young Al Pachino, but his not terribly far off.  Maybe they’ll get it by Episode 9.  One thing I think is probably helping this figure is the paint, which is a step-up from the last few figures.  I did have to pick through a few sets to find the one with the best work, but they did seem a bit sharper in general this time.  There’s still a bit of slop around the wrists, but that’s a minor issue.  Poe’s packed with his blaster pistol (the same one included with several Poe figures), as well a headset, or as a like to call them: “Beats by Rey.”  Yeah, I went there.

THE ME HALF OF THE EQUATION

It’s no secret that I’m a pretty big Poe fan. Ever since the first images of this set leaked, I knew it was going to be at the top of my list.  It was actually one of the few items I didn’t find the week prior to Force Friday, which bummed me out initially, but less so in the end, since I wasn’t able to buy anything then anyway.  This set was the very first item I grabbed on Force Friday.  I almost got stepped on to get it, but them’s the risks you take, right?  The ship’s pretty fun and I look forward to seeing it in action.  Honestly, I kind of bought this for the new Poe figure, and he didn’t disappoint.  Now, knowing my luck, he’ll end up released on his own in like a month.  Still, this is one of my favorite items I picked up this time around.

#1081: Poe Dameron & First Order Snowtrooper Officer

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

POE DAMERON & FIRST ORDER SNOWTROOPER OFFICER

STAR WARS: ROGUE ONE (HASBRO)

snowtrooperpoe1

Last Friday was Rogue Friday, Hasbro’s second attempt at the whole “Force Friday” thing they tried last year.  It marked the official launch of all of the Rogue One-related products.  However, in light of the fiasco that was last year’s Force Friday event, most stores decided to forego the midnight opening event, with only Toys R Us participating.  Super Awesome Girlfriend and I headed over to the closest TRU last Thursday night, and I picked up an assortment of Rogue One products.  Today I’ll be looking that the first of the bunch, Poe Dameron and the First Order Snowtrooper Officer.  Why are Poe and a First Order Snowtrooper in the Rogue One line?  Well, it’s because it’s been a well-kept secret of Rogue One actually involves the Snowtrooper Officer being sent back in time to kill Jyn Erso and prevent the birth of Resistance fighter Rey.  The only hope of stopping him was the Resistance’s own Poe Dameron, sent back to protect her.

Wait. Sorry, that’s actually the plot of Terminator.  My mistake.  Right.  Yeah, Poe and the Snowtrooper are just here because TFA product is still being released under the Rogue One banner, as is the case with most new Star Wars lines!  I doubt Poe’s really going to be in the movie.

THE FIGURES THEMSELVES

Poe and the Snowtrooper Officer are one of the three 2-packs in the first Battle-Packs assortment in the Rogue One line.  Each line has one or two Force Awakens products peppered in and these two are that portion of the Battle-Packs.

POE DAMERON

snowtrooperpoe2I kinda love Poe Dameron.  He’s easily my favorite part of TFA.  So, I was pretty happy to see another Poe pop up with all the new figures.  Of the three new main characters, Poe ended up with the most distinct looks.  So far, we’ve gotten his jacketed look from the beginning of the film and his pilot look from later.  The only one missing is his dress uniform from the very end of the film, which is the look this figure replicates.  It’s admittedly a somewhat obscure look, since it’s really only seen in the one shot, but it’s cool to get it nonetheless.  The figure stands a little under 4 inches tall and he has the basic 5-points of articulation that everyone should be accustomed to with these new Star Wars figures.  Poe gets an all-new sculpt.  That means we get yet another attempt at Oscar Isaac’s likeness for the head.  It’s still not perfect, but I think this is the best version we’ve gotten from Hasbro yet.  The rest of the body does a good job of snowtrooperpoe5translating the uniform we see on screen into action figure form, at least from the few reference shots I’ve been able to find (seriously, this is a short-lived look).  One thing I do really like is that, even with it being a totally new sculpt, the pants and boots here are clearly the same ones on the jacketed figure.  That’s consistency!  The paint on this guy is alright, but not without issue.  Sadly, most of those issues are on the head (again), mostly dealing with the hairline (again).  It’s far from the worst paint I’ve seen from Hasbro, but it could definitely be better. On the plus side, at least he’s not as pale as some of the prior Poe figures!  The paint on the body is pretty solid, as well, which is good.  Poe includes a blaster pistol (the same as the one that came with his X-Wing pilot figure).  He is also the figure in this set who gets the big honking missile launcher.  Because Hasbro.

FIRST ORDER SNOWTROOPER OFFICER

snowtrooperpoe3Befitting the “VS” nature of the new two-packs, Poe’s pack-mate is a First Order Snowtrooper Officer.  He’s pretty much the same figure as the First Order Snowtrooper (reviewed here), but with an added shoulder pauldron.  That means he’s still about 4 inches tall and has those same 5 points of articulation as everyone else.  The Snowtrooper wasn’t a bad figure, but I’ve never been super into the Snowtroopers in general, so getting yet another isn’t exactly blowing my mind.  Seeing as Poe’s a pilot, wouldn’t a Tie Pilot be more appropriate?  I don’t know.  This guy has the same accessories as his predecessor, a blaster with an extended stock and a back pack.

THE ME HALF OF THE EQUATION

So, as noted in the intro, these guys came from Toys R Us’s midnight event for Rogue Friday.  Last year’s event was kind of a bust, so I wasn’t really sure what to expect this time around, and only even decided to participate a day or so in advance.  Super Awesome Girlfriend and I showed up at the closest TRU at about 11:30 last Thursday night, and we were only the third people in line.  I had a very pleasant conversation with the two guys in front of me (both older fans who were amused that someone my age was out for such an event).  At 12:01, the doors opened, I made my way to the action figure aisle, and picked up most of the figures I wanted, this set included.  I even got a free t-shirt!  A hugely improved experience over last year.

As far as the actual figures?  Well, the Snowtrooper’s kind of blah, but I like the new Poe figure a lot.  He might actually be my favorite of the smaller Poe’s we’ve gotten, even if he is in his briefly seen outfit from the end.  Silver lining: now my TFA Leia isn’t all lonely in her final scene outfit!

snowtrooperpoe4

#1072: Poe Dameron

Posted by Ethan Wilson in Reviews and tagged with , , , ,

POE DAMERON

STAR WARS: ELITE SERIES (DISNEY)

poedamdiecast1

Man, it’s hard to believe it’s been over a year since The Force Awakens product started hitting shelves.  This Friday, we’ll be seeing another midnight release, this time around for the products from Rogue One.  With Force Awakens, there was a lot of product being released in a relatively short span of time, so it was a little difficult to keep track of it all.  The main characters were available in a variety of scales, from a few different manufacturers.  Of course, I’ve looked at Hasbro’s 3 3/4-inch and 6-inch lines, but the Disney Store also got in on the action, offering a line of die cast figures (die cast is just all the rage right now).  The line more or less slipped under my radar.  I knew it existed, but wasn’t quite aware of the depth of the line until rather recently, which is why I’m only just now reviewing my first figure from the line, Poe Dameron.

THE FIGURE ITSELF

poedamdiecast3Poe is from the second round of the Disney Store-exclusive Star Wars: Elite Series.  He was released to coincide with the movie’s release back in December, and was the last of the film’s three leads to make it into the line (Poe’s absence from the first series of so many of the lines is a bit odd, especially given how popular the character proved to be.  Perhaps Disney under-estimated his appeal).  The figure stands about 7 inches tall (placing him roughly in scale with most of NECA’s output, as a reference), and he has 16 points of articulation.  He’s also reeeallly heavy, thanks to all that metal.  His torso, pelvis, arms, and legs are all metal, with plastic being used for the head, hands, feet, poedamdiecast4belt/tubes, and a few of his joints.  Poe’s certainly constructed from a lot more metal than a lot of die cast items, which is actually pretty cool.  It results in the figure being a little less posable than I might like, but the sheer heft of this guy is pretty nifty, and you can still manage some decent poses.  As far as the sculpt goes, Poe’s overall not bad, but not without a few issues.  On a whole, the details seem a little soft.  I’m not sure if it’s the sculpt or the paint, but he’s got a certain animated feel too him.  I’m also not really a fan pf the left hand, which looks a little like it was replaced by an inflated latex glove, due to the weird, puffy absence of a palm.  Possibly the most notable issue is more a construction thing than anything.  In poedamdiecast2order to be properly assembled, Poe needs to have 9 visible screws on his back, apparently.  That seems a little excessive to me, but I could be wrong.  At the very least, they aren’t visible from the front.  Moving past those issues, I think Poe’s actually got a pretty decent sculpt.  In particular, the head, I feel, is a better Oscar Isaac than we’ve seen elsewhere.  It’s still not perfect (it would appear he’s the Harrison Ford of the new trio in that respect), but it looks pretty good.  Poe’s paint is alright, though it’s kind of basic in terms of color, and a little sloppy in more than a few areas.  It’s also quite thick.  Plus, I’ve already noticed one or two chips on mine, which is slightly frightening.  I’ll be interested to see how it holds up in the long run.  Poe included his small blaster, his helmet, and a display stand.  The blaster and the stand are both pretty cool, but the helmet is a slight letdown, due to the opaque nature of the visor, and the fact that Poe actually can’t wear it. 

THE ME HALF OF THE EQUATION

I got Poe from the Disney Store that was in the same mall as the Apple Store where I was buying my new computer.  I actually wasn’t aware that they had made a Poe in this line, so he was a nice surprise find.  He’s not a perfect figure but I think he might be my favorite Poe straight out of the box (my amalgamation of the two Black Series Poes is still my favorite overall, though).  Poe is still my favorite part of TFA, so it was really cool to find a new Poe to buy.

poedamdiecast5

#0947: Resistance X-Wing Fighter (w/ Poe Dameron)

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

RESISTANCE X-WING FIGHTER (W/ POE DAMERON)

STAR WARS: THE FORCE AWAKENS

ResistanceXWing1

In the current climate of toymaking, where the costs of plastic are trending fairly consistently upward, pretty much every new mold produced needs to justify the cost of its production. In the years past, most items had large enough initial production runs to offset the tooling costs in pretty much one fell swoop. Sadly, as public interest has moved towards more technologically advanced entertainment, the market for toys has shrunk. Initial production runs are smaller, and so to make sure they tooling costs are covered, companies do their best to get multiple uses out of the same pieces, which tends to mean repaints. Today, I’ll be looking at one of these repaints: the Resistance X-Wing Fighter!

THE VEHICLE ITSELF

ResistanceXWing2The Resistance X-Wing Fighter was released as part of Hasbro’s Star Wars: The Force Awakens line, released right at the tail end of 2015. It was available exclusively at Walmart. The Resistance X-Wing uses the same mold as Poe’s X-Wing (reviewed here). Like that set, the vehicle requires a tiny bit of assembly when it’s first taken out of the box: the nose and wing cannons need to be attached and there are a few small decals meant to be applied to the interior of the cockpit. When assembled, the fighter is 15 ½ inches long and has a wingspan of 13 inches, just like Poe’s version. Poe’s X-Wing had a pretty nice sculpt, and it’s still nice here. It remains a little undersized, but, given the re-use, that’s not a shock. It’s also slightly less of an issue this time, since the included figure sits a little lower. The nose is still made from a softer rubber (which honesty didn’t bug me with Poe’s X-Wing, but it did turn a few people off). One noticeable change is the quality of the wing cannons. The actual sculpt hasn’t changed, but the manner in which they were packaged has, so they came out of the box far less warped than the prior set, which greatly improves the overall look of the vehicle. The paint is the most noticeable deviation from the prior X-Wing. In place of the dark grey and orange of Poe’s personalized vehicle, this one gets the off-white and blue palette of the basic Resistance fighter. It looks really clean, works very well on the fighter. The application is all pretty solid too, with no major slop or the like. BB-8 is still a little under painted on the body, but consistency I guess. The action features on this fighter are the same as those on Poe’s fighter. The wing feature seems a little tighter this time around, but the missile launcher appears to be identical.

THE FIGURE ITSELF

ResistanceXWing4Included with the Resistance X-Wing Fighter is another figure of ace pilot Poe Dameron. He’s based on his look from the film’s opening, which is appropriate, since that’s when Poe is seen using this style of fighter. The figure uses the body of the Armor-Up Poe, along with the head of the single release pilot Poe. While it’s not a combination that really plays up the Oscar Isaac likeness, it’s not a terrible set of pieces. The body is solidly sculpted and has a lot of really cool detail work, so I don’t mind seeing it again. The head isn’t a bad sculpt, but it is a touch generic, especially with the opaqueness of the visor.  Still, it’s a decent representation of the helmet design from the movie, and the details are all pretty well realized. From the neck down, the paint is identical to the Armor-Up figure, which is fine, since that was pretty good. The head is slightly different, since it’s replicating Poe’s more unique helmet from the beginning. The paint is nice and sharp, so that’s good. The opaque visor is a little frustratingly cartoony, but that’s more the fault of the sculpt. Though he’s sort of an accessory himself, Poe does get one accessory: his blaster rifle. It’s the same piece seen with the Armor-Up Poe, but it’s another scene specific piece. I only wish there were somewhere for him to keep it while piloting so that it wasn’t rattling around in the cockpit.

THE ME HALF OF THE EQUATION

Despite loving the normal release X-Wing and loving the Resistance color scheme, I’ve passed this set up more than a few times in the last few months, due mostly to the $50 price tag. It’s not unreasonable, but it makes me need redundant pieces a bit less. Last week, I managed to find this set at a nearby Walmart on clearance. At 50% of its original value, the set felt way more worth it. If I’m honest, I think the main fighter is superior to the Poe version. The blaster issue has been fixed, and the tension on the wing feature works a bit better. The included Poe isn’t quite as fun as the other version, but his generic-ness makes him a pretty decent unnamed Resistance Pilot. Ultimately, I’m not sure this set is quite as necessary as the first, but for half its original price, it’s way worth picking up.

ResistanceXWing3

#0835: Poe Dameron

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

POE DAMERON

STAR WARS: THE BLACK SERIES

PoeDamWM1

So, a slight aside: I do my very best to keep this site light and fun. Action figures are kind of my one outlet of pure enjoyment, and I like to pass that enjoyment on to others as best I can. Sometimes, the real world gets to me a bit, but I try my best not to let it influence my writing, but it gets really hard. Back in December, The Force Awakens was by far my favorite thing of the moment, and more than anything, I wanted to review Star Wars toys. So, I bought a whole bunch, took the pictures, and put them on the schedule. But, before I could get around to actually reviewing them, several outside forces cropped up, and managed to suck just about all the excitement I had for Star Wars toys right out of me. There’s a whole lot of fighting going on in the community, and I’m just not a fighter. I really just want to enjoy my toys. So, in the next five days, I’m going to do my best to review some figures I was really excited about, without letting the outside stuff get me down. As an advance warning, that probably means minimal introductory comments from me for a few days.

Anyway, sorry if I brought people down; let’s move onto today’s figure. It’s Poe Dameron, number one pilot in the Resistance.

THE FIGURE ITSELF

PoeDamWM2Poe is part of the third series of Walmart-exclusive Star Wars: The Black Series figures. Prior to the Force Awakens branding, Hasbro was running The Black Series in both 6-inch and 3 ¾-inch scales, but the rebranding led to the 3 ¾-inch line being nixed, in favor of a more expansive selection of the lower-end 3 ¾ inch figures. Fortunately, Walmart decided to carry the higher-end 3 ¾-inch figures as exclusives, giving collectors a chance at some better articulated versions of The Force Awakens’ main characters. Poe stands 3 ¾ inches tall and has 26 points of articulation. Articulation is one of the main selling points on these guys, and most of Poe’s joints are pretty well-handled. The only real problem areas are the hips, which use a somewhat outdated style of joint and are a bit of a pain to work with. Poe gets an all-new sculpt, which depicts him in his pilot gear, which, after seeing the film a few times, really feels like his definitive look. The sculpt of this figure has a fair bit in common with the 6-inch version of Poe, but a close examination of the two shows that it’s not just a shrunk down version of that one. The sculpt has a ton of great texture work, and it’s top-notch for the scale. Poe’s likeness seems to be the toughest one to crack for Hasbro. It’s hard to accurately judge the sculpt on this one, since it’s under some iffy paint, but it does appear to be Hasbro’s closest effort so far. Unfortunately, it’s under the aforementioned iffy paint. Most of the paint on this figure really isn’t that bad, but the face just doesn’t look right. It’s definitely the eyes and eyebrows. The pupils of the eyes are too low-set, and the brows are just too thin to properly capture Oscar Isaac. I’d love to say the eye issues are a one-off, but every version of this figure I’ve seen looked about the same. Poe includes his helmet and a small blaster. The helmet is a great piece, and it’s the first one not to look oversized, and the blaster fits nicely both in Poe’s hand and the holster on his belt.

THE ME HALF OF THE EQUATION

I was surprised by these figures, truth be told. I’d heard rumblings of them happening, but I hadn’t seen any actual confirmation. Then I caught pictures of Series 3 over the holiday, and knew I’d have to try and track them down. Poe was the first one I found; he was the only figure left at my local Walmart. None of the Poe figures so far have been quite right, and this one continues that trend. Were the paint on his face a bit better, he’d be the best version of the character, but as it stands, I still like my mash-up of the two 6-inch figures the best. Still, this guy’s not a terrible figure, and he’s probably the best small-scale Poe out there.

PoeDamWM3

#0812: Poe Dameron

Posted by Ethan Wilson in Reviews and tagged with , , , ,

POE DAMERON

STAR WARS: THE BLACK SERIES

PoePilot1

For day 11 of the Post-Christmas gift reviews, I’ll be taking one more venture into the far, far away galaxy of Star Wars. I really, really enjoyed The Force Awakens. More so than most movies I can remember, at least of those released in the last few years. I really can’t think of anything from the movie that I really disliked. Back before the film was released, when I was reviewing a bunch of figures I knew absolutely nothing about, I was somewhat intrigued by Poe Dameron, despite having next to nothing to go on as far as what the character would be like. Upon seeing the film, Poe quickly became my favorite of the new characters. All of the sudden, the two action figures I had just didn’t seem like enough. As luck would have it, I didn’t have to suffer through only having the two figures for very long, as Christmas brought me both the smaller scale Poe’s X-Wing Fighter set and the other of the two 6-inch scale Poes, which I’ll be reviewing today.

THE FIGURE ITSELF

PoePilot2Poe was released as part of the second series of the Force Awakens-branded Star Wars: The Black Series figures. He’s figure #07, which makes him numerically the second figure in this series, after Captain Phasma. The figure stands about 6 inches tall and has 25 points of articulation. The articulation is mostly pretty good, but the lack of back and forth movement on the wrists is more than a little frustrating. The last Black Series Poe I looked at was based on his jacketed look from towards the beginning of the movie, whereas this figure is based on his pilot look from the film’s second half. He’s a mostly unique sculpt, though I have seen the head before, by nature of getting the two-pack version of the character first. It is because of owning that figure that I can correctly diagnose that it is not the sculpt of the figure’s head that is to blame for it looking as hideous as it does. There is in fact a halfway decent Oscar Isaac sculpt hiding under the paint. The rest of the sculpt is pretty good, with lots of great texture work on the jumpsuit, especially the ribbing on the sides of the arms, and there’s also some very nice work on the layering of the PoePilot3various pieces of his outfit. The build of the figure feels perhaps a bit on the stocky side for Poe, but the flightsuit was somewhat bulky in the film, so it isn’t far off. When discussing the paint, one can’t exactly ignore the elephant in the room that is his head. I have no clue what happened here, but man is that face paint horrid. It’s proof positive that it doesn’t matter how good the sculpt is, a lousy paint job will kill it every time. Seriously, did Hasbro hand out pictures of Peter Falk as Columbo instead of Oscar Isaac as Poe? Because, when I see this guy, I expect him to say “oh, and there’s just one more thing…” and then solve a murder. The rest of the paint is actually quite good, with a number of washes to help bring out some of the sculpt’s finer details. Poe is packed with his helmet, a blaster pistol, and a spare set of ungloved hands. The extra hands are interesting, because they give the figure an extra four points of articulation, making the missing movement from the gloves all the more curious.

THE ME HALF OF THE EQUATION

Poe was another gift from my parents. He’s actually a figure I’d seen once or twice before the movie’s release, only to pass on him, due to the face paint. After seeing the movie, and discovering just how awesome Poe is, I realized that was a mistake, so I was very happy to unwrap this figure on Christmas morning. No excuses can be made for that head, but, on the plus side, it can easily be swapped with the two-pack version with relative ease, making a decent figure downright amazing.

PoePilot4

#0808: Poe’s X-Wing Fighter

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

POE’S X-WING FIGHTER (w/ POE DAMERON)

STAR WARS: THE FORCE AWAKENS

PoeXwing1

For day 7 of the Post-Christmas gift reviews, I’ll be venturing back into that galaxy far, far away. However, this time I’ll actually be looking at something from the new movie.

Back when Kenner had just gotten the Star Wars license, and they were deciding on scale, George Lucas was adamant that the figures be small enough that in-scale ships were still a possibility, which led to the decision to use the 3 ¾ inch scale, and ultimately had an undying impact on the action figure industry as a whole. See, the ships were a key piece of the story, since you can’t very have those titular “Star Wars” without them. One of the more distinctive ships was the X-Wing fighter, the main ship of all our favorite Rebel pilots. The X-Wings have made a triumphant return in The Force Awakens, and a triumphant return to the toy aisles with today’s focus, Poe’s X-Wing Fighter.

THE FIGURE ITSELF

PoeXwing2Seeing as the name of this set is “Poe’s X-Wing Fighter,” it’s not really a huge shock that the included pilot is Poe Dameron. The figure is 3 ¾ inches tall and has the same 5 points of articulation as all the other 3 ¾ inch Force Awakens figures. Poe’s body looks to be the same one that was used on the single release Poe, though I don’t actually have one to compare. It’s a decent enough sculpt. The jumpsuit has a reasonable amount of texturing and there’s some nice layering to the sculpt. The vest seems a little soft in some areas, but not terribly so. The head sculpt is shared with the “Armor Up” version of the character. I liked it well enough when I reviewed that figure, and I like it well enough here. It’s not a perfect match for Oscar Isaac, but it isn’t terrible either. At the very least, it’s got a slightly better paint job (though the skin tone is definitely too pale). The rest of the paint is passable, but nothing tremendous. There’s a fair bit of bleed over in several areas, and the edges of the vest are fairly fuzzy. Poe includes a helmet and a small blaster. The helmet is actually really cool, if perhaps slightly oversized, and the gun looks to be the same piece included with Goss Toowers.

THE VEHICLE ITSELF

Let’s be honest here, nobody was really buying this set for the figure, were they? No, the selling point is the awesome X-Wing fighter he’s meant to fly! Out of the box, there’s a tiny bit of required assembly. The cannons and the nose of the fighter are packed separately from the main vehicle, so they have to be attached, and there are also a few small decals to be placed inside the cockpit. Once assembled, the main body of the vehicle is 15 ½ inches  in length and it has a 13 inch wingspan. The X-Wing has 2 points of “articulation” for the cockpit and the landing gear. The cockpit could stand to open just a bit more, but other than that, the basic movement is pretty smooth. The X-Wing fighters in The Force Awakens got an all-new design (officially dubbed the T-70), inspired by Ralph McQuarrie’s original concept drawings from the first movie. It’s a slightly more svelte, less cobbled together look than the prior T-65. The toy gets a new sculpt designed to replicate the design from the film. Some changes have definitely been made for the sake of a slightly easier to produce toy. Chief among them is the decision to scale the whole thing down just a bit. It’s really not that evident, except for poor Poe having to do some serious slouching to fit in the cockpit with the top shut. In addition, some of the more intricate details of the craft have been made less intricate, which gives the whole thing a slightly more simplified look. Given that this ship is designed to go with the 5 POA 3 ¾ inch figures, these changes are reasonable, and make it so the ship fits in with the rest of those offerings.

PoeXwing3

The ship has a non-removable BB-8 built in, much like the R2-D2s built into the X-Wing toys of old. I was happy to see he got a fully detailed sculpt, which matches up pretty well to the single release figure. The construction of the X-Wing isn’t without its issues, though. The most glaring ones are pretty much all related to the parts that were separate in the box. The first, and by far the most minor issue for me, is the softer rubber material used for the nose. This is clearly a safety standards thing, so I can understand why it was done. It really doesn’t look that bad, and my only real concern is how it will hold up over time. The big issue is the level of warping present on the wing cannons. They come like that out of the box, and look a bit on the silly side. Fortunately, there are a few fixes that can be applied, or, if you don’t want to fix them yourself, you can just shoot Hasbro an email and they’ll send you a replacement set for free. Other than that, all the other nits are fairly minor. There are a few exposed screws, but they’re all in fairly out of the way places. The general construction of this ship really isn’t horrible. Paint is something of a key piece on this one, since it’s the color scheme that denotes the fighter as Poe’s. The grey/orange scheme is pretty striking here, and it works nicely with the mold. The actual paint is fairly basic, with just solid color work. There are some areas with some slightly uneven coverage, but the overall look is quite good. BB-8’s head gets some nice work, but his body is left completely unpainted, which is just a tad jarring. The X-Wing has two action features. The main one is the wing feature. When BB-8 is pressed, the wings pop open into the signature X formation. When the button behind him is pushed, they go back to their normal positioning. The mechanism isn’t particularly strong, so the wings won’t stay open if you set the ship down, which is a tiny bit of a letdown (and it also made taking pictures rather hard). The other feature is a more simple missile launching one. Pressing a button on the underside of the fighter launches the included missile. It’s actually surprisingly powerful, so try not to shoot your eye out.

THE ME HALF OF THE EQUATION

Poe’s X-Wing Fighter was another Christmas gift from my incredibly supportive parents. It’s not a perfect item. I can make a list of the issues, I can say it’s a step back after the more advanced X-Wings we’ve gotten in the past. It’s under-sized, and the cannons are warped, and maybe the paint could be better. But when I opened this thing up and put it together? Pure joy. I think it might just be my favorite item I received for Christmas. Seriously, I was so excited that I may or may not have run through the house with it making flying sounds…

PoeXwing4

#0787: Poe Dameron & Riot Control First Order Stormtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

POE DAMERON & RIOT CONTROL FIRST ORDER STORMTROOPER

STAR WARS: THE BLACK SERIES

Poe&Trooper1

By the time you guys read this review, I’ll have already seen the new Star Wars movie. Lucky me! Unless it’s terrible, in which case, un-lucky me! Of course this review was written beforehand, since I had to, you know, go see the movie, so I can’t offer any actual thoughts on the movie. I also still don’t have any real information on any of the new characters, so, hey, enjoy one more review of me talking about stuff I don’t know! That’s the best, right? Let’s have a look at resistance pilot Poe Dameron and a Stormtrooper variant!

THE FIGURES THEMSELVES

This pair was released as part of a two-pack of figures from the new Force Awakens-branded Star Wars: The Black Series line. The set is a Target exclusive (in the US, anyway).

POE DAMERON

Poe&Trooper2“An ace pilot, Poe Dameron is a leader in the Resistance’s fight against the evil First Order. He soars into battle behind the controls of a modern X-Wing fighter.” So, yeah, that’s kind of the same bio we’ve gotten on every Poe figure so far. Hey, at least they’re consistent! This figure is based on Poe in his
“casual” look (the same look used for his “Armor Up” figure in the smaller scale). Poe is 6 inches tall and has 25 points of articulation. When this figure was first announced, the assumption was that he’d be making use of a lot of re-used parts, especially given that he and Finn have the same jacket. However, it appears that the only piece to actually be re-used is Poe’s head, which is the same piece as his single release figure (though you can be forgiven for not realizing, for reasons I’ll touch on in a bit). The likeness is decent enough, though not quite as good as some of the other figures. The rest of the sculpt is all-new, and quite well handled too. As with the smaller scale figures, Poe and Finn’s jackets have enough minor differences to give each of the figures a bit of uniqueness. Poe’s jacket is much sharper detailed in general, which makes it look a bit better. Poe’s paintwork is generally pretty good, though it is not without its drawbacks. The base color work is all pretty good, and there’s Poe&Trooper3not too much slop or bleed over. The clothing, especially the coat, have some nice accent work to help bring out some of the sculpt’s details. The head’s paint is easily the sloppiest, with the same wonky hairline that’s plagued all of the Poe figures so far, as well as a slightly messy attempt at giving him 5 o’clock shadow, which just looks a bit goofy. However, it’s leaps and bounds above the regular release Poe, who’s paint was, to quote Shaun of the Dead’s TV edit, “funk ugly.” Poe is packed with a rifle (which is the same model as his smaller scale figure), and a helmet.

RIOT CONTROL FIRST ORDER STORMTROOPER

Poe&Trooper4“Armed with specialized batons, the First Order’s Riot Control Stormtroopers are trained to subdue crowds in the most ruthlessly efficient manner possible.” Yeah, so here’s another Stormtrooper. But he’s got a new hat—I mean baton and shield! He’s the same figure as the regular First Order Stormtrooper from the first series of Force Awakens The Black Series figures.  It’s still a good sculpt, and you really can’t have too many Stormtroopers, so no complaints there. The main difference is the accessories. He gets the same pair of blasters as the regular release, plus a shield and baton, which make him an official “Riot Control” Stormtrooper. They’re both quite nicely sculpted, though he has a bit of trouble actually holding the baton.

THE ME HALF OF THE EQUATION

I ended up finding this set at one of my two local Targets, without too much trouble. The main appeal of this set (for me anyway) was definitely Poe, since I hadn’t yet gotten him in this scale. I don’t have his other figure to compare, but this one looks to be the better of the two. The Riot Trooper doesn’t offer much new, but the new accessories are pretty cool, and I won’t say no to another Black Series Stormtrooper!

Poe&Trooper5

#0690: Poe Dameron

Posted by Ethan Wilson in Reviews and tagged with , , ,

POE DAMERON

STAR WARS: THE FORCE AWAKENS

PoeDam1

I’m in a bit of Star Wars mood. I’m sure none of my readers have the slightest idea as to why that might be. Certainly, it can’t have anything to do with a little thing called Force Friday, could it? I can neither confirm nor deny. Well, after a bit of a disappointing start at Toys R Us, my Force Friday experience worked out alright in the end, resulting in a nice little hall of figures, mixed between the two main scales. I figure I’ll be true to the franchise and kick things off with a look at the 3 ¾ inch figures, starting with my man Poe here. Poe, for those of you unaware, is one of Force Awakens’ new characters, and by all accounts he’s set to be part of the new “power trio” of characters.

THE FIGURE ITSELF

PoeDam2Poe Dameron is part of the first assortment of 3 ¾ inch The Force Awakens figures. There are a few different sub-assortments so far, with some slightly different themes. Poe is part of the “Armor Up” set, which are a set of slightly more expensive figures, which feature armor pieces. He’s one of the two 3 ¾ inch Poe figures available (three if you count the one included with the X-Wing.) He’s the only of the three figures not to be based on Poe in his flight gear look, instead presenting him in what appear to be Rebel fatigues. I have no idea which look will end up being the more prominent in the film, but I liked this one. The figure stands 3 ¾ inches tall and has the now standard 5 points of articulation. The articulation is disappointing, but I won’t continue to harp on it. Poe features an all-new sculpt; it’s not bad. The body is nicely proportioned, and the detail work on his clothing is quite intricate. You can even make out all the different types of seams and pockets on his jacket, which is pretty cool. The likeness on the head isn’t spot-on, but it bears more than a passing resemblance to actor Oscar Isaac, which is pretty good at this scale. As far as paint goes, there’s not a ton of it. Most of the plastic is molded in the proper colors. There’s a bit of detailing on the jacket, as well as the belt and the boots. Most of the application is decent, if a little bit sloppy. The head is okay, but the hairline is definitely a little off and they missed his sideburns almost entirely. This was actually the better of the two figures I saw; the other was missing a fair portion of the front of his hair. Poe is packed with a blaster rifle, which has an impressive amount of detail for the scale (Tim was even able to identify the real gun it was built on and what mods were made), as well as the somewhat gimmicky armor piece. It’s some sort of helmet/chestplate/jetpack combo, which I have a sneaking suspicion won’t be showing up in the movie. I do wish the helmet were a separate piece, since it actually looks to be somewhat accurate.

THE ME HALF OF THE EQUATION

So, clearly, I didn’t get Poe from my late night Toys R Us run. I was bummed about not getting much at the 12:01 opening, so, while on my way to visit Super Awesome Girlfriend for Labor Day weekend, I decided to stop by a few other stores. The first was a Target, where I found Poe and a handful of other 3 ¾ inch figures. I like this figure a lot, actually. I know next nothing about the character, but he intrigues me for whatever reason, and, aside from the articulation issues, this is a well done figure.