Tag Archives: Power of the Force II

#2848: Wedge Anitlles

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

WEDGE ANTILLES

STAR WARS: POWER OF THE FORCE II (KENNER)

Poor Wedge, he gets no respect.  Despite being in all three original trilogy films, and being the only person to survive both Death Star runs, he was completely absent from Kenner’s vintage toyline.  When he did finally get his due as a toy, it furthered the whole “no respect” thing just a bit more.  Packed with a Millennium Falcon-shaped carrying case (because, he’s just clearly the most logical choice for such a thing), initial shipments of the very first Wedge Antilles figure were actually produced with an incorrect color scheme.  While I’ve looked at the corrected Wedge figure, I’ve yet to look at the original release.  I’ll amend that today.

THE FIGURE ITSELF

Wedge was released as the pack-in figure with the Millennium Falcon carrying case, which was added to the Power of the Force line in 1997.  This figure was only available in initial shipments, before being replaced by the corrected version shortly after.  The figure stands about 3 3/4 inches tall and he has 6 points of articulation.  Like the corrected version, this figure was built using the same body as the Luke Skywalker in X-Wing Pilot Gear, which is a bit of a misnomer, since it’s actually Snowspeeder Pilot gear.  Again, like that figure, he also gets a different head from Luke.  It still doesn’t look much like Dennis Lawson, but it does at least look distinctly different from Luke, so at least it’s clear it’s a different guy.  The only difference between this figure and the corrected version from later is the paint work, specifically on the helmet and the arms.  The helmet, rather than showcasing Wedge’s correct paint scheme, actually has somewhat of a merging of Wedge and Luke’s helmet designs, leaning a little more heavily into the Luke side.  It’s not a bad design, honestly, but it’s inaccurate.  The arms feature extra white detailing on the raised ribbing on the sleeves.  Again inaccurate, but it’s at least a cool extra detail.  Like the regular release, Wedge was packed with a small blaster pistol.

THE ME HALF OF THE EQUATION

After I got the regular version of this guy, this one was certainly on my list, but mostly just for the novelty.  I didn’t really put much effort into tracking him down, or anything, but I was keeping a look out for him while working at the store.  As luck would have it, he came through in a big collection of loose figures I got to process last spring.  He’s a weird oddity to be sure, and makes you wonder about the process that led to these errors making it to production.  Still, he’s a pretty fun novelty to have in my collection.

#2813: Emperor’s Royal Guard

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

EMPEROR’S ROYAL GUARD

STAR WARS: POWER OF THE FORCE II (KENNER)

NOTE: This review was written before June 6th.

“Only the most promising soldiers are chosen to serve as Emperor Palpatine’s personal guards. Experts in many forms of combat, both armed and unarmed, they are conditioned to automatically react to the Emperor’s will.”

Introduced in Return of the Jedi, the Emperor’s Royal Guards don’t really do much of anything on the screen.  The just stand there.  They look cool and all while doing it, but still, it’s just standing.  Then they reappeared in Revenge of the Sith, and did some more standing.  Also got force thrown around by Yoda a bit, which is something, I suppose.  But mostly still with the standing.  The toys, at least early ones, kind of go along with this, being built mostly for said standing.  Behold, a figure that stands!

THE FIGURE ITSELF

The Emperor’s Royal Guard was added to Kenner’s Power of the Force line in 1997.  This marked the second figure of the design, following up on the vintage release from 1983.  The figure stands just shy of 4 inches tall and has a whopping two points of articulation.  Okay, technically three, I suppose, because the neck is sort of jointed.  Doesn’t really move, but they tried.  The Royal Guard was the type of figure referred to as a “salt shaker” by the fanbase, due to his skirted design meaning that his torso was all one immobile piece, much like a common table salt shaker.  While the original figure had placed a whole body beneath the figure’s cloth cape, the cloth pieces weren’t really a thing at this point in the line, and so Kenner just made the underlying body one solid block.  The red cloak is still a separate piece, so you can lift it up and see that they’re nothing impressive beneath it, if you so choose, but it hardly seems worth it.  At the very least, the helmet’s pretty cool.  It’s nice and sharply defined, and just looks pretty clean.  The arms, on the other hand, look kind of chunky for some reason.  Odd choice there.  The paint is virtually non-existent on this figure, apart from the black on his visor.  That was it, with nothing more.  I mean, I guess it works, but it’s not terribly exciting.  The Guard is packed with his little poking stick, and, if you were lucky, a Freeze Frame slide.  I was not lucky.

THE ME HALF OF THE EQUATION

Seeing as they only really stand there, I never had much attachment to the Royal Guards.  They look cool, but that’s it.  And, when it came to this figure, that really was it.  There’s virtually no play value at all here.  He stands real good, because, well, there’s not actual legs, so it would be hard for him to fall over, now wouldn’t it.  This figure wound up coming to me through a trade I did with Max a couple of years ago.  Mostly I got it because I’m getting all of the Power of the Force figures, and I kind have to get this one, now don’t I?  Honestly the sturdiness is nice from a display standpoint.  If you just want an army of them to stand behind Palpatine at attention, as in the movie, this is honestly your best bet.  So, maybe he’s not without value.  But he’s still not a great toy on his own.

#2806: Jawa & “GONK” Droid

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

JAWA & “GONK” DROID

STAR WARS: POWER OF THE FORCE II (HASBRO)

NOTE: This review was written before June 6th.

“Jawas are small, foul smelling machine-scavengers of Tatooine’s deserts. Crafty traders and talented mechanics, they often use power ‘Gonk’ droids to provide energy for their scavenged goods.”

Though they only got one single release in the vintage line, and they’re only in one film of the original trilogy, when it came to Power of the Force II, Kenner was determined to give the Jawas some more proper coverage.  They got in early, with a pair of them joining the line’s second year.  There was also a follow-up in 1997 with one of the creatures.  Finally, we got one last one just as the line was on its way out, this time alongside possibly the best droid in the whole franchise, the “GONK” Droid!

THE FIGURES THEMSELVES

The Jawa and “GONK” Droid were added to Power of the Force in 1999, officially falling into Hasbro’s tenure in the last two years.  They were part of the second round of figures for the year, running concurrently with the Episode I figures.  The Jawa stands about 3 inches tall (placing him between the two from the two-pack in sizing) and has 6 points of articulation.  Hasbro was getting a little more experienced with robe construction, so this one’s actually got a separate robe piece for the bottom half, with actual legs sculpted beneath it.  It means more articulation, but also means less motion, since the robe only allows so much movement.  In terms of pure functionality, the prior design honestly worked a bit better, but I suppose the appearance is a little better on this one.  The depth of detail on this new figure was more involved, so he’s a bit more technically impressive, although the overall appearance is really the same as the larger Jawa from the two-pack.  The paint work on the Jawa is virtually identical to the prior releases, right down to the light-piping square on the top of his head.  If it ain’t broke, don’t fix it, I guess.  The GONK winds up as a bit more of an accessory.  He’s about 2 3/4 inches tall and he has moving legs, but not in a way that really counts as articulation.  There’s a button on the left side, which moves right leg backward, and the left leg forward.  Unfortunately, to facilitate this feature, that means the default set-up has the right leg forward and the left leg backward, with no way to lock them into place in a regular standing position.  And he’s not really stable in the default pose.  You have to rely on rubber bands or twisty ties if you want to keep his legs in a regular pose.  That’s not ideal.  On the plus side, it’s at least a fairly nice sculpt, far removed from the vintage design, and transitioning into something far more screen accurate.  These two are packed with two accessories: a blaster for the Jawa and a CommTech chip, which actually does play sounds for both figures.  That’s pretty cool.

THE ME HALF OF THE EQUATION

I’ve always liked the Jawas, and, of course, I have a fondness for the GONK due to my brother Christian’s attachment to the LEGO version, so this was a set that it’s kind of surprising how long it took me to acquire.  I actually had it for a while before reviewing, as I’d picked it up during one of my big splurges of Power of the Force buying from All Time.  But, it remained sealed hanging on my wall for a bit, until one in a ratty package came through, and I decided it was easier to swap them, since I was going to open mine eventually anyway.  Hey, at least it pushed me to finally open them.  These figures are overall pretty good, but they both suffer a little bit from some over-engineering.  Fortunately, it’s easy enough to work around, and, especially in the case of the GONK, it’s worth working around, because it’s a very nice looking figure.

#2799: Captain Piett

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN PIETT

STAR WARS: POWER OF THE FORCE II (KENNER)

NOTE: This review was written before June 6th.

“Following Admiral Ozzel’s fatal mistake during the assault on Hoth, Darth Vader promoted Captain Piett to the station of Admiral. Piett remained in command of Vader’s Executor until its destruction during the Battle of Endor.”

The Empire’s most visible and most marketable troops are certainly the Stormtroopers, but they aren’t the ones that get to make all of the decisions.  That’s left to the far less marketable Imperial Officers.  During the vintage toyline, Kenner didn’t actually make any named officers, giving us just one generic one to cover things.  When it came time to fill things in for Power of the Force II, they rectified that by actually doing a few of the named officers.  This included one Firmus Piett, the longest lived ranking Imperial in the films, serving as Admiral over both Empire and Jedi.  But we’re not talking about that.  No, we’re going before that, when he was just a Captain.  For reasons.

THE FIGURE ITSELF

Captain Piett was added to Power of the Force in 1998.  Though he’s billed as a Captain, it’s notable that the bio describes his whole career path in the film, and we also never got an Ozzel, so he might as well just be an Admiral.  The figure stands 3 3/4 inches tall and he has 6 points of articulation.  Structurally, he’s quite similar to the Tarkin figure.  It makes sense, what with them being in the same uniform, and having a rather similar build.  It’s notable that they’re still totally unique from each other, though; no shared parts at all, even the ones that are almost identical.  It’s a reasonable enough sculpt.  Like Tarkin, he’s a little bulked up, but not nearly as much as earlier figures in the line.  The head doesn’t really look much like Kenneth Colley, who played Piett in the film.  Colley has some rather distinctly harsh lines on his face, and they aren’t really here.  He’s also got a much stronger jawline than he should.  Ultimately, he just looks much more generic. Not enough that I think the intent was for him to initially be a generic guy, but enough that he’s not immediately recognizable as Piett.  The paint work is pretty standard, matching up with the other Imperial Officers from the line, and generally being pretty cleanly applied.  Piett is packed with the same small blaster as Tarkin and Motti, as well as a baton (for all that baton stuff he does), and a Freeze Frame of Piett on the Executor…from when he’s an Admiral...

THE ME HALF OF THE EQUATION

Piett’s a character I always had a little bit of a soft spot for, since it’s hard not to feel bad for the guy the way he winds up in his position.  I mean, he’s still a bad guy, like, through and through, but still.  Despite that, however, I never actually had this guy as a kid, nor did any of my cousins.  It’s probably because he’s not a super distinctive figure, I guess.  He’s not bad, mind you, and actually works pretty well as a rank and file Imperial.  So, if you want maybe a few of him, that’s maybe not the worst thing.

#2792: Ishi Tib

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ISHI TIB

STAR WARS: POWER OF THE FORCE II (KENNER)

“The Ishi Tib characters come from the planet Tibrin, where they live in the cities built atop coral reefs. Ardent freedom lovers, several Ishi Tibs offered their talents in service to the Rebel Alliance.”

Ah, good, the bio pretty much answers any questions I had.  Well, that sure is convenient.  That’ll do, bio.  That’ll do.  Now, when you look at a character like this, a wonky looking alien, if you will, from the Star Wars universe, most assumptions go to it being from one of two places.  Either it’s a patron of the Mos Eisly Cantina, or one of the hangers on from Jabba’s palace.  This one is, shockingly, from neither of those.  Nope, this one’s instead from the Rebel briefing from Return of the Jedi, which looked to amend the overly human representation of the first two films by adding an assortment of its own wonky looking aliens.  And boom, here’s the Ishi Tib, who are, in fact, a race, and not just one guy.  Obviously.  Ishi Tib’s clearly not a name, you guys.  Why would you think that?

THE FIGURE ITSELF

The Ishi Tib was added to Kenner’s Power of the Force line in 1998.  It was a good year for characters from Jedi‘s Rebel briefing, so the Tibs fit in well with that.  The figure is just shy of 4 inches tall and has 6 points of articulation.  The movement on this figure is somewhat restricted by its design, with the head’s shape limiting what can be done with the neck joint, and the robe piece limiting the arms and legs.  The robe is designed so that it could be removed in theory, I suppose, with slits up the side, and a fully detailed sculpt beneath it.  However, the shaping of the head kind of keeps it stuck in place, unless you want to risk mutilating it.  It’s honestly a pretty nice sculpt, overall, though.  The head in particular holds up, and feels on par with more recent offerings.  I suppose it could use some extra texturing, but ultimately I think all the necessary details are covered.  The paint work on the figure is subtle, but well handled.  The base work is all cleanly applied, and there’s even some slight accenting on the head, which is pretty cool.  The Ishi Tib is packed with a somewhat goofy looking blaster rifle, as well as a Freeze Frame showing a shot of the Rebels all being briefed.  I don’t believe any of the Ishi Tib are actually visible in the shot, but it’s admittedly hard to tell.

THE ME HALF OF THE EQUATION

I wasn’t really familiar with the Ishi Tib prior to acquiring this figure.  I mean, I knew the general design of them, and all, but I certainly wouldn’t have guessed this wasn’t just one guy named Ishi Tib prior to reading the figure’s bio.  This one is one I wound up grabbing during one of my big PotF pushes, in the fall of 2018, alongside a whole bunch of other figures.  I mostly grabbed this one at the time because I liked the more unique alien look.  It’s admittedly pretty cool, so I can get behind it.  It’s just a nice, fun figure.

#2750: Emperor Palpatine

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

EMPEROR PALPATINE

STAR WARS: POWER OF THE FORCE II (KENNER)

I was going to begin this review by remarking that I’ve never actually reviewed an Emperor Palpatine figure review, but that’s…well, it’s a lie, I guess, because I have.  Clearly, I’m very invested in the character, because I keep such close tabs on him.  I mean, yeah, he’s the most pivotal single character in the whole saga, I suppose, but he’s…boring?  I mean, I guess the unlimited power gimmick is always good for a laugh.  But beyond that?  Meh.  Even his toys tend to be pretty meh.  I mean, there’s only so many ways to add something new and different to an old guy in a cloak.  This one goes for simulated unlimited power.  Go figure.

THE FIGURE ITSELF

Emperor Palpatine was the fifth and final of the five figures in the Power F/X line-up of Power of the Force figures.  He falls more into R2’s vein, being more of his own standalone piece, rather than more interactive with the others like the three lightsaber wielders.  It feels a little bit like a missed opportunity, though, since he’s based on Palpatine’s portion of the throne room battle, which would make him a somewhat decent pair off with Luke, allowing for multiple display options if you get the whole set.  As it stands, he’s just, kind of off on his own, and not really ingrained to the crossline playability set-up.  The figure stands 3 3/4 inches tall and he has 3 points of articulation.  Well, he’s got three joints…I hesitate to really call it articulation, because there’s hardly any actual motion to be had.  He’s pretty much just got the one pose, making him even less posable than the other figures in the set, and that was already kind of a low bar.  The figure’s sculpt is a tweaking of the prior single-card release of Palpatine, which wasn’t a terrible set-up.  It was an old guy in robes, and I guess it did that well enough.  This one’s an old guy in robes, but with his arms up this time.  He kinda looks like he’s doing the Thriller dance.  Like Vader, this guy’s sculpt does at least hide the battery pack a little better than Luke or Obi-Wan did, so he doesn’t look quite as weird.  Although, admittedly, a hunch back wouldn’t look all that out of place for this guy.  His Power F/X feature is worked into his hands, similarly to the three lightsaber wielders, but for his lightning (commonly referred to as “unlimited power” by those in the know).  The bolts slot into his hands, and the effect is, again, a fairly weak light, but I guess it’s alright.  His paint work is pretty much just on the face and hands.  It’s kind of thick, but consistent with the other PotF Palpatine figures.  At least there’s no notable slop or anything.  Palpatine gets his own stand, based on his spot in front of the window on the Death Star II.  It doesn’t work quite as well as the other three Death Star stands, I find, but it’s not a bad set piece, I suppose.  It’s got the little arm for moving him around, but it doesn’t really have the same appeal without that dueling ability the other three had, or the slightly more fun magnet gimmick from R2.

THE ME HALF OF THE EQUATION

Palpatine was really just a side effect of getting the rest of this set of figures.  He was in the lot, and I wasn’t really going to turn him down, I guess.  In retrospect, Luke and Vader are really the only two I really wanted, and the others are a bit extraneous.  Palpatine really exemplifies this, because he just doesn’t really seem to fulfill the same purpose as the others.  That’s probably why he tends to be the least desired of the set.

#2743: Ben (Obi-Wan) Kenobi

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

BEN (OBI-WAN) KENOBI

STAR WARS: POWER OF THE FORCE II (KENNER)

In last week’s review of Kenner’s Power of the Force Power F/X Darth Vader, I brought up the figure’s compatibility not only with the previously reviewed Luke Skywalker, but also with Obi-Wan Kenobi, a figure I had not yet reviewed.  Can you really say you’re surprised that I’m reviewing that figure now?  I mean…I don’t think you can, but I’ve been wrong before.  Anyway, let’s just get onto the figure!

THE FIGURE ITSELF

Ben (Obi-Wan) Kenobi (as the line was very insistent on in reference to him) was another 1997 release, the fourth of the five figure Power F/X sub-line of Power of the Force.  In contrast to Vader’s cross-film set-up, Ben is, unsurprisingly, based on his A New Hope appearance, specifically his final duel with Vader, which is sensible, since it was, at this point, his only real lightsaber battle.  That being said, it’s low key kind of a shame that they didn’t use the Power F/X set-up for some shimmering force ghosts.  I guess that’s not as inherently toyetic.  Ben stands 3 3/4 inches tall and has 5 points of articulation.  Just like the last two, his right arm is restricted in order to facilitate the light-up feature, and the rest of his articulation’s more for just tweaking the exact nature of his stance.  His sculpt is quite similar to all of the other Kenobi’s from the line, being especially cut from the same cloth as his first figure and the one from the Cantina Cinema Scene boxed set.  He’s even got the same headsculpt as those releases, and his still removable cloak piece is almost identical to the one from the boxed version.  Beyond that, he really just follows the lead of Luke, being a somewhat awkward sculpt, including still having the hunch on his back for the batteries.  The robe does it’s best to hide this, but it doesn’t work quite as well as Luke’s cape did.  He does at least add a little more detailing to the lightsaber hilt than Luke did, but it’s still somewhat removed from the film product.  Ben’s paint work is pretty much the same as the other versions of the character, apart from one rather notable mistake: his lightsaber is the wrong color, being green, rather than the appropriate blue.  Supposedly, this change occurred because blue LEDs were more expensive than green, and Kenner couldn’t justify the cost.  Seems like a weird choice to me, but here we are.  Ben was packed with the same hallway stand piece that was included with Luke, allowing him, like Luke, to be connected with the Vader figure for a more interactive set-up.  And, while Luke came with an entire cardboard backdrop for him and Vader, Ben and Vader each got half of an A New Hope-inspired backdrop, which shows off the Millennium Falcon in the Death Star‘s hangar bay.

THE ME HALF OF THE EQUATION

Luke was the only one of these I had as a kid, but I came very close to buying Obi-Wan a few times, mostly because I no longer had my original release, and I wasn’t yet at the point of going for exact replacements for my toys.  I never really could muster the excitement to grab this one, though.  He’s alright, but admittedly a bit redundant for me, since the Luke/Vader pairing is the one that holds more nostalgia.  Perhaps I’ll snag a second Vader some day, so that I can justify having Vader face off against each of them.

#2736: Darth Vader

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DARTH VADER

STAR WARS: POWER OF THE FORCE (KENNER)

If I seem uncharacteristically agitated or prone to getting frustrated during today’s review, fear not, dear reader. It isn’t you that I’m frustrated with, or even the figure I’m looking at, just know that at the core of things is a desire to seek out whomever created WordPress’s Block Editor and do something awful to them…like force them to use WordPress’s Block Editor…much as they have done to me. Feels like poetic justice if I’m entirely honest. Or something that the Spectre could really get behind. I feel like I should see what that guy’s up to….or I suppose I could write this review, and try not to focus too much on how frustrated I am by the interface I’m writing it on. Last week, I looked at the second of my Electronic Power F/X Power of the Force figures. Today, I’m looking at another, specifically Darth Vader, who’s stepping up his Power F/X game.

THE FIGURE ITSELF

Darth Vader was released in 1997 as part of Power of the Force‘s aforementioned “Electronic Power F/X” sub-line.  He followed the early Vader set-up of being more of a combination of all three of his film appearances, rather than being clearly based on one in particular.  This would work to Kenner’s favor in terms of this toy’s playability, as it meant that Vader could face off against either Luke or Obi-Wan, depending on your fancy.  The figure stands roughly 4 inches tall and he has 5 points of articulation.  Like Luke, his movement is somewhat restricted by the inner workings of the figure’s light-up feature, meaning his right arm is largely rendered inert.  He’s been sculpted with something of a walking gait, much like the Shadows of the Empire variant.  It means that, much like that figure, he has a lot of trouble staying standing.  Hence him making use of some sort of prop or stand in all of the photos, because this guy was really not cooperating.  Otherwise, the sculpt is pretty much business as usual for the early Vaders.  If you’ve messed with one Beef Cake Vader, you’ve messed with them all.  He’s certainly got an imposing silhouette.  Due to his larger size, the battery housing is at least less of an issue for this guy, so he doesn’t have the weird hump set-up like Luke did.  Like Luke, Vader’s arm has been built with lightsaber as a part of it, though it’s a lot less rudimentary than Luke’s.  This one actually vaguely detailed to match Vader’s actual hilt from the movie.  The light up feature works pretty much the same way as Luke’s, and is also not terribly bright, but it’s there.  The paint work on Vader is pretty much the same as all of the other Vaders from the line.  It gets the job done and looks pretty decent, even if it’s not terribly involved.  Vader is packed with a large base piece, which is the match for Luke’s Death Star hallway, just meant to be the other half.  It even connects to Luke’s for a more full diorama set-up, and allows for them to “duel” via the arms for moving them around.  It’s actually pretty fun.

THE ME HALF OF THE EQUATION

As I brought up last week, Luke was the only one of these I had as a kid.  That being said, I always really wanted Vader, mostly due to the whole interacting with Luke thing.  Fortunately, All Time had him and three of the others right as I was really getting serious about this PotF thing.  Vader’s not really all that new when compared to other Vaders from the line, but he goes well with Luke, and there’s no denying that this goofy, gimmicky thing really works best when you’ve got multiples from the set.

 

#2729: Luke Skywalker

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LUKE SKYWALKER

STAR WARS: POWER OF THE FORCE II (KENNER)

Hey, remember yesterday, when I was talking about a mid-90s line’s use of light-up features in order to re-introduce some of the core characters into the market place again?  Well, as it turns out, Toy Biz’s X-Men wasn’t the only line to try that.  Kenner’s Power of the Force did it too!  Everything’s better with lights, right?  Well, Kenner certainly felt so.  While I’ve looked at the line’s one outlier, R2, already, they also covered the original trilogy’s four most action-oriented force users.  I’m kicking my dive into the line-up off with our hero, Luke Skywalker!

THE FIGURE ITSELF

Luke was released in 1997 as part of Power of the Force‘s “Electronic Power F/X” sub-line.  Luke gets more to the actual point of the line-up than R2 did, actually focusing on one of the OT’s cool fight scenes, in his case the battle between Luke and Vader on the second Death Star in Return of the Jedi….well, sort of, anyway.  The figure stands about 3 3/4 inches tall and he’s got 5 points of articulation.  He loses the usual waist joint, and also gets severe limitations on the right shoulder, both due to the electric feature.  Beyond that, none of the other joints really give him much actual range, due to the somewhat pre-posed nature of the figure’s sculpt.  He’s…sort of, like, mid-lunge, I guess?  Like, for stabbing?  I don’t know.  The actual sculpt’s not exactly Kenner’s finest work.  The head’s distinctly different from the original PotF2 Luke head that looked nothing like Mark Hamill, but still looks nothing like Mark Hamill, so it’s a lateral move.  The light-up features have a direct impact on the quality of the sculpt on the right arm and the torso, since that’s how the feature works.  The torso’s rather bulked up, especially at the back, in order to house the batteries, which give him sort of a hump back.  Not the most flattering thing, which is why he also gets the cape, which Luke doesn’t actually wear in the scene this is replicating, in order to hide the hump a bit.  The arm has been designed with the lightsaber built into it, with his hand kind of folded around it.  It’s kind of crude, and not really hand shaped, and the hilt is really wide, short, and basic in its detailing.  It’s definitely goofy looking.  There’s also this sort of cap piece that goes over the the actual blade.  I think it’s really just meant to be part of the packaging, but it’s not coming off of mine.  The actual light-up feature’s okay, I guess.  Not terribly bright, and barely noticeable in the photos here.  It’s also a little hard to activate, due to it being behind the cape. The paint work is all pretty basic work.  It’s not bad, but the right arm’s definitely a bit fuzzy.  Otherwise, pretty standard for the line.  Luke’s packed with a large base piece, meant to look like one of the halls from the Death Star.  Like R2, there’s an arm for moving him around, though this one doesn’t do the whole magnet thing; it’s just a basic peg set-up instead.

THE ME HALF OF THE EQUATION

As a kid, this was actually the only of the “Power F/X” figures I had, because I was all about Luke, and I was all about a good gimmick.  Unfortunately, these figures, more than others from the line, don’t really stand up to play so well.  As such, my original Luke is in pretty rough these days.  Fortunately for me, All Time had four of the five figures in the set right as I was ramping up on filling in my PotF collection, and that gave me the opportunity to pick up this guy again, alongside the rest of the set.  This guy’s hella gimmicky, and hella goofy, but I can get behind it.

#2694: Ben (Obi-Wan) Kenobi

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BEN (OBI-WAN) KENOBI

STAR WARS: POWER OF THE FORCE II (HASBRO)

“Legendary among the heroes of the Rebel Alliance, Ben (Obi-Wan) Kenobi is regarded as one of the greatest Jedi Knights ever to have lived. As a young Jedi who had just completed his own training, Obi-Wan made a solemn pledge to train young Anakin Skywalker in the ways of the Force. Anakin became a Jedi but then turned to the dark side and became Darth Vader. Many years later, destiny would have an older and wiser Obi-Wan guiding Anakin’s own son, Luke Skywalker, in the ways of the Force, and ultimately, in turning Vader back to the light side.”

Last week, I took my first dive into the Power of the Force Flashback Photo subset of figures, and rather poked fun at the concept and how far of a reach some of those figures were for the idea.  Well, in their defense, some of them did make at least some bit of sense.  Given that it was to tie-in with the first of the prequels, and there were actually some crossover characters, showing those characters from the original trilogy, and offering the flashback there?  Not the worst idea.  Among the cross over characters was Obi-Wan Kenobi, who I’m taking a look at today.

THE FIGURE ITSELF

Ben (Obi-Wan) Kenobi, as he is so specifically named on the box, was part of the first set of “Flashback Photo” Power of the Force figures, hitting towards the end of 1998, just as we were getting prepped for the new movie.  He was our fourth Obi-Wan from the line, and only the second to be part of the regular line.  The figure stands 3 3/4 inches tall and he has 10 points of articulation.  This would mark the first real move to improve the articulation on these figures, as Obi-Wan wound up with a whopping three joints in each of his arms.  Sure, they were all cut joints, and sure, the rest of his movement was majorly restricted by the robes, but it certainly was a step up.  Also of note was the fact that this was the first Obi-Wan not to be based on the first PotF figure’s molds, making him generally less oddly bulked up and weird looking.  He’s still a little more bulked up than Sir Alec Guinness actually was in the movie, but it’s not quite as insane.  Preposing is a bit more involved this time, with the figure being designed to directly interact with the “Flashback” Vader figure, in an effort to recreate their duel from A New Hope.  With the extra articulation, there’s a little more variety as to what you can do, though it’s still not a ton.  Honestly, the screen accurate thing wasn’t the worst concept, and it does at least make him a little more unique compared to others in the line.  It’s not a bad looking sculpt, either, and they were really starting to get the hang of making the clothes look fairly natural on the bodies.  The hood in particular doesn’t look too bad, and hoods are usually pretty darn tricky.  The only downside is that the hands have some difficulty holding the lightsaber, which does somewhat hinder his purpose.  In terms of paint work, Obi-Wan is about on par with the rest of the line, so he’s basic, but generally pretty well handled.  All of the important details are there, and they’re pretty cleanly applied.  Obi-Wan is packed with his lightsaber, which is about all he really needs.  Of course, he’s also got the Flashback Photo, which is about as intriguing here as it was with Beru.

THE ME HALF OF THE EQUATION

All of the Flashback Photo figures passed me by as a kid, just because there wasn’t actually much new coverage there.  This one in particular proved frustrating for me as a kid, because I just wanted a prequel Obi-Wan figure, and I kept finding this one, and he wasn’t really what I wanted.  Admittedly not really the figure’s fault, I suppose.  I wound up getting him this past fall when he was traded into All Time.  He’s not a bad little figure, and is probably this line’s best version of Obi-Wan.