Tag Archives: SDCC Exclusive

#3537: Orko

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ORKO

MASTERS OF THE UNIVERSE CLASSICS (MATTEL)

Fun FiQ Fact #0016:  Orko’s original name was “Gorpo,” but having a “G” on the front of his robe would have made it difficult for Filmation’s animators to easily flip his animation cels from shot to shot, so his name was changed.

I was very hot and cold with Masters of the Universe Classics.  I definitely fell into some of its hype (it was hard not to at the time, especially given how into DC Universe Classics I was), but it was also not a line that was particularly easy to get into without paying an arm and a leg.  Even within my usual rule of only certain characters it was tricky, just based on the weird ways things wound up released.  I did wind up getting *most* of the figures I really wanted, though, which included the goofy comic relief sidekick, Orko!

THE FIGURE ITSELF

Orko was the 2010 San Diego Comic Con exclusive for the Masters of the Universe Classics line.  There were two versions: an attendee version, and an online version.  The one here is the online version, which was the more standardized of the two, as the attendee version had a heat-activated invisibility feature.  The figure stands just shy of 3 inches tall and he has 13 points of articulation.  This figure was a big deal at the time for being the first Orko properly scaled to the line he accompanied; the vintage figure was much too large, and the 200x was still a touch out of scale.  Also, while his articulation wasn’t top-notch or anything, he’s surprisingly mobile for an Orko, and even at this point, he’s only rivaled by the Origins figure.  This one got an all-new sculpt (a rarity for the line), which is clearly modeled on his Filmation incarnation.  It’s clean and well-rendered, and very certainly looks the part.  His color work was a mix of paint and molded.  The colors are a good match for his usual look, but the paint is notably a little on the sloppier side, especially when it comes to his ears.  Orko was packed with his staff and book, as well as the flight stand used by Triclops’ seers, allowing him to float.  Well, more fly; it’s honestly a little too tall, given Orko tended to float closer to the ground.  Still, as the one bit of re-use, it’s alright.  Orko also included one more, rather substantial accessory: a full Prince Adam figure.  Yep, despite being a full-scale Classics figure, Adam is treated as an accessory in every way, not getting proper billing on the package (though there’s a bubble that denotes his inclusion off to the side of Orko’s name), and even packaged laying down below the cardstock name tag for Orko.  If you don’t know he’s there, it’s possible to miss him.  Why exactly Mattel opted to do him this way is anyone’s guess, but they did some odd stuff at the time, so I’m not gonna try and delve into that myself.  Adam was built on the standard barbarian body (with the matching wrist bracers), so he stands about 7 inches tall and has 23 points of articulation.  He got a new head (with a real Mona Lisa smile situation going on for the expression), as well as a new vest piece.  He also got accessories of his own, in the form of both molds for the power sword (full and split) in the proper magenta color, and an alternate head borrowed from the standard He-Man.

THE ME HALF OF THE EQUATION

I didn’t much care for Orko being an exclusive, and I didn’t have any luck getting him from Matty Collector directly either.  What *did* happen, however, is that I somehow managed to find a sealed one on eBay for a surprisingly low price.  I really only bought it for Orko, and him I do genuinely love.  Since I’m a 200x fan at heart, a classic Adam is something I could take or leave.  And, in fact, I took him and I left him…which is to say, I sold him when he was going for a rather insane aftermarket price, completely offsetting what I put into the set, because why not.  I got the pictures, though, so think of his presence in the review as being like that one last movie an actor filmed before they died, I guess.  Or maybe something less morbid?  I don’t know, do what makes you happiest.  I certainly did, which is why I just have the Orko and not the Prince Adam.

#1770: Han Solo – Exogorth Escape

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HAN SOLO — EXOGORTH ESCAPE

STAR WARS: THE BLACK SERIES

“Han Solo, captain of the Millennium Falcon, was one of the great leaders of the Rebel Alliance. In the wake of the of the battle of Hoth, Solo fled with the rest of the RebelForces and evaded the pursuit of Imperial TIE Fighters as he expertly maneuvered the Falcon towards the perceived safety of a crater in the Hoth asteroid belt. Infamous for his bold plans that seemed to always defy the odds, Solo soon discovered that the unstable crater upon which he had landed the Falcon – and its crew made up of co-pilot Chewbacca, Princess Leia Organa, and C-3PO – was in fact the cavernous mouth of a giant space slug known as an Exogorth. In the belly of the beast, Solo and crew discovered an inhospitable environment of noxious fumes and parasitic, swooping Mynocks – bat-like creatures who ate through power cables and drained the energy from even the most impressive ships. With the life of his comrades and beloved Millennium Falcon threatened, Solo was called again to emergency action, and steered the Falcon to safety, barely escaping into space through the rapidly collapsing jaws of the ravenous Exogorth.”

Remember the Solo Han Solo Black Series figure that I liked so much?  And remember how I said at the end of that review when I said I’d be sincerely disappointed if there wasn’t a Bespin Han of a similar quality released within the next year?  Well, looks like I don’t have to be sincerely disappointed!

THE FIGURE ITSELF

Exogorth Escape Han Solo was released as a SDCC 2018-exclusive offering for Hasbro’s Star Wars: The Black Series.  Like Thrawn, Jyn, and the First Order Stormtrooper before him, he serves as a sort of a preview for a mass-retail released figure, specifically Bespin Han Solo, who is hitting stores in the latest round of Black Series figures.  The figure stands 6 1/4 inches tall and he has 27 points of articulation.  Han’s articulation scheme follows the trend established by the Solo versions of Han and Lando, which is to say he’s got some really great range on a lot of those joints, especially the neck joints.  I definitely appreciate this new style for the line, and it’s nice to have a Han can be more expressive than the rather stiff Smuggler version.  The sculpt for this Han is all-new, and overall one of the line’s strongest offerings.  The head sculpt is the main selling point, based largely on its improved Harrison Ford likeness.  While we got a pretty good older Ford likeness from the TFA version, the younger Han has always been a tough mark.  This figure has one of the best takes we’ve seen to date.  It’s still not 100% there.  The hair seems a little off, and the face goes a little bit more for caricature, but the overall appearance is very, very close.  The body is a fairly balanced sculpt, proportion-wise.  The shoulder’s could probably stand to be a little broader, but that’s a decidedly a minor issue.  The detail work, especially on his jacket, is clean and sharp, and there’s some solid texture work all throughout.  I’m also quite happy that they’ve changed up how they do the non-dominant hands, so that it’s a more sensible grip, rather than the weird claw grip we got with the last two Han releases.  Han’s sculpt is aided by some absolutely top-notch paint work.  He uses the printed face technique, which really further sells the likeness on the head.  The SDCC release gets a little extra shading on the face than the regular release, but it’s definitely a minor change.  The body paint is more basic, but he does get some nice weathering on his belt and holster.  Aside from the minor paint difference on the face, the main thing that separates this release from the regular retail offering is his accessory complement.  Both figures include Han’s blaster, which is mostly accurate to the Empire model of the blaster, apart from lacking silver paint on the barrel.  In an effort to make this figure live more appropriately up to his “Exogorth Escape” subtitle, this Han also includes one of the Mynock creatures that had affixed itself to the hull of the Falcon, as well as his breathing apparatus he wears while walking around the Exogorth’s innards, a hydrospanner, and an extra left hand.  The Mynock is a fun piece, and I really like the slightly transparent wings.  I do sort of wish it had a flight stand of some sort, though.  The rebreather fits nicely over Han’s face, though I would be careful about taking it off; those seams on the strap don’t look too durable.  The hydrospanner is a nice scene-specific piece, which looks good in his off-hand.  The left hand might actually be my favorite accessory in the whole set; there’s just so much Harrison Ford in how the hand is posed.  I can practically hear him telling off Threepio!

THE ME HALF OF THE EQUATION

I was unable to attend SDCC this year (or any year, really; living on the other side of the country has that affect on you), so I didn’t have the opportunity to pick this set up in-person.  Honestly, I wasn’t even sure I was going to get it, since the base figure’s getting a standard release and everything.  But, Super Awesome Fiancee wanted the Doctor Aphra set, so I had to log onto Hasbro Toy Shop anyway, and this guy was just sitting there in-stock.  I’m glad I splurged for the deluxe version.  Bespin Han is hands down my favorite look for the character, and I truly love the extras they’ve packed in with him.  By far, the very best version of Han in this line.  Or any line, really.