#3775: Hal Jordan vs Thaal Sinestro

HAL JORDAN VS THAAL SINESTRO

DC UNIVERSE CLASSICS (MATTEL)

Hey, hey, hey, it’s another DC Universe Classics review!  I’m enjoying the weekly rhythm on these, so I’m keeping it going for a bit.  I’m also keeping the Hal Jordan theme going, because why not?  Last week, I brought up how there were no Hals in 2009, but there were three of him in 2010.  Well, he’s another one of the 2010 ones, facing down his arch enemy, Thaal Sinestro, in exclusive two-pack form!  Who doesn’t love that?  Well, a few people, for, admittedly, valid reasons.  But let’s not dwell on that here.  Onto the review!

THE FIGURES THEMSELVES

Hal Jordan and Thaal Sinestro were released as a Toys “R” Us-exclusive DC Universe Classics two-pack, which hit towards the later part of 2010.  It was one of six two-packs released in 2010, and one of the two released at TRU.  The pack contains the two figures, accessories for each of them, and a split color yellow and green power battery for them to fight over.

HAL JORDAN

This was Hal’s fifth entry into DCUC, and it was sort of an amalgam of some ideas that had come before.  Structurally, he’s the same as the last two Hals I looked at.  The figure stands 6 1/2 inches tall and has 23 points of articulation.  He’s using the medium base body and the standard Hal head sculpt.  They were good the first few times, and they were still good.  In fact, on my figure at least, he’s got even better plastic quality than the prior two.  The main change-up here is the paint work, which is pretty drastic this time.  This one is a glossy, metallic finish, which I actually really like.  It’s very sleek, and an intriguing contrast to the flatter colors.  He also takes some inspiration directly from his Super Friends appearance, with a slightly adjusted logo (something that not even the officially Super Friends based figure got right), and visible pupils.  The eyes got him labeled as “creepy eyes Hal” by a lot of the fanbase, but I’ve never been quite as bugged by them myself.  While prior Hals were without any constructs, this one gave him a few options: a gun attachment (from John Stewart), buzzsaw (from Gold), and a mace (from Iron).  It’s crazy that they went into the John Stewart molds for a construct and didn’t give him the giant fist that always felt tailor made for Hal.  It’s even crazier that they *never* gave that attachment to Hal in the whole of the line.  But, at least he got something.

THAAL SINESTRO

What, didn’t you know Sinestro was his last name?  Yeah, he’s actually Thaal.  I *totally* knew that before this pack came out and didn’t totally discover it when the set was announced.  I’m a proper GL fan.  I couldn’t miss a detail like that, right?  Right.  Last week, I discussed the height issues of the original DCUC Sinestro.  The 5-Pack didn’t really come up with a good solution, but this pack aimed for something a little better.  Generally, it succeeds, but there’s certainly some Frankensteining involved.  He starts with the skinnier base body of Deadman, and adds on the forearms, head, collar, and belt of the Series 3 release.  Honestly, it’s not terrible.  His forearms are perhaps a little short, and the neck joint is rather tight, but otherwise, it goes together alright, and is certainly a better end product than his original diminutive showing or the 5-pack version.  Sinestro’s paint work is basic and clean, and generally a good match for the stuff that came before.  Sinestro gets his own assortment of constructs in yellow, including Gold’s pickaxe, Iron’s wrench, and Hawkman’s mace.  The mace is handheld, which is weird, but it’s just one of the three, at least.

THE ME HALF OF THE EQUATION

I remember this set’s release, and I remember the frustration around it at the time.  It was kind of pricey for an ultimately unneeded repaint of Hal and the Sinestro we should have gotten in the first place.  I, being a college freshman, with not a ton of money, didn’t go out to get one right away.  I did, however, find a loose pair not too long after the fact, while trying to build back up my GL collection.  Honestly, this set’s not a bad one.  It gets a bad rap, but Sinestro’s the best one Mattel offered, and I do like the Hal a lot more than I’d initially expected.  There were certainly worse offerings from the line.

#3770: Green Lantern’s Light

HAL JORDAN, GUY GARDNER, JOHN STEWART, SINESTRO, & TOMAR RE

DC UNIVERSE CLASSICS (MATTEL)

Last week, I did my first dive back in to DC Universe Classics since early last year, because that’s the space I’m deciding to occupy right about now.  I kicked things off by looking at the very first Green Lantern from the line, so I guess I’ll keep that particular theme running.  Green Lantern was at something of a high point for the property while DCUC was running, with the main comic being consistently at the top of DC’s list, plus multiple events building out of it, and, of course, the movie on the horizon.  In 201, there was quite a bit of lead-up to the film tie-ins, which included not just a whole GL-sub-line, but also a fair bit in the main line as well, such as today’s big ol’ boxed set!

THE FIGURES THEMSELVES

Officially titled “Green Lantern’s Light,” this 5-pack was a Walmart-exclusive DC Universe Classics offering, which hit retail in 2010.  It was the second of three such 5-packs offered up by Walmart during the line’s run.  In contrast to the prior year’s set, all of the figures included here were unique in someway, and would remain so going forward (though that doesn’t mean the set didn’t have a lot of re-hash).  In addition to the five figures, the set also included 5 power batteries, this time in a more sensible color than the first release.

HAL JORDAN

While training in a flight simulator, test pilot Hal Jordan was suddenly transported to the crash site of an alien spacecraft. The injured pilot passed on to Jordan his green ring and uniform. The ring allowed him to make real anything that he could imagine, from flying unaided through space to lifting mountains. With it, Jordan, chosen by the ring itself because of his fearlessness, must fight evil as a member of the Green Lantern Corps.”

After kicking off the GL-theme in 2007 and getting a two-pack release in 2008, there were notably no Hal Jordans to be had in 2009.  It’s okay, because 2010 made up for it by putting out three of them.  Like his standard Series 3 release, this one stands about 6 1/2 inches tall and he has 23 points of articulation.  He’s the same exact mold as that one, which was pretty much expected.  It’s a solid starting point, since it’s a pretty nice sculpt in the first place.  In order to mark a little more change, this guy was specifically based on Hal’s post-Crisis appearances, when they gave him the graying temples to signify his status as one of the last hold-outs from the Silver Age.  It actually works pretty well, and differentiates the figure more than you might think.  In addition to the hair change, this Hal gets the same iridescent green for the uniform as the rest of the set, which works a touch better than the flat green used previously.  I also find the paint to be generally cleaner and sharper than on the earlier figure.

GUY GARDNER

“When Abin Sur crash-landed on Earth, his power ring detected two equally suitable replacements: Hal Jordan and Guy Gardner. Jordan got the ring because he was closer to the crash. Later, Guy received a second chance to join the Green Lantern Corps, but he often clashed with Jordan. Still, the Guardians sensed great potential in him. After proving himself, Guy Gardner was promoted to ‘honor lantern,’ one of the highest ranks in the Corps.”

Hey look, it’s Nathan Fillion!  That’s a joke I could have done above, as well, I suppose.  It’s funny that he’s played two different Earth Lanterns, though.  With Man of Tomorrow hitting this year, Guy is set to get some focus, which is good for him, I suppose.  Personally, I never resonated much with guy, and he was always my least favorite Earth Lantern (at least until Baz showed up, but there’s a lot of layers to that one).  I’ve grown to appreciate him more in recent years, though.  Guy represented he heaviest allotment of new tooling in this set, given his more unique design.  He got a new head, forearms, and lower legs, as well as a new overlay piece for his vest.  Generally, it’s an okay set-up.  Certainly different.  The head’s notably very cartoonish, and I was never a huge fan of that.  He’s seems especially out of place with the other Lanterns, even just in this set.  Something just a little more refined might have worked a bit better. The rest of the new parts work out alright, though, and I do like the vest piece. The paint is also a little bit sloppier on this one, especially on his vest.  The white detailing seems to have given them difficulty in particular.

JOHN STEWART

“When Green Lantern Hal Jordan was incapacitated en route to a JLA adventure, Hal’s power ring selected John Stewart to be Hal’s ‘alternate’ peacekeeper of Space Sector 2814. Honest and utterly without fear, John was eventually awarded his own power ring and full-time status as a Green Lantern in his own right. He continues battling evil as a Green Lantern, his dedication earning him full membership in the JLA.”

John Stewart had been added to DCUC the previous year, with a pretty fantastic figure at that.  This one takes that one and sort of tweaks it and it sort of works but it sort of doesn’t.  Since he’s re-using parts from the last John, that places him on a different base body than the other four figures in this set.  He’s still got the same basic articulation set-up, and he’s only fractionally taller, but the upper torso in particular is a bit more bulky.  In general, the initial John sculpt is a very good one, on par with the initial Hal Jordan.  The issue it runs into here is that it’s clearly a modern John Stewart…and his costume isn’t.  The paint attempts to place him in one of his earlier suits, earlier in the Mosaic run…more or less.  It’s a bit of an amalgam of sorts.  It’s not a bad one, mind you, but the hair on the sculpt doesn’t really match, nor do the raised edges on what were originally wrist bands on the first figure, now supposedly gloves.  Overall, it’s not terrible, but he’s certainly off.  The application of the paint is at the very least pretty clean; not quite as sharp as Hal, but a little better than Guy.

SINESTRO

“Sinestro was chosen to patrol space sector 1417 as its Green Lantern, but instead he ruled Korugar with an emerald fist. While he trained fledgling GL Hal Jordan, the Korugarians freed themselves and exposed Sinestro’s abuse of power. The Guardians of the Universe stripped Sinestro of his mantle and power ring, subsequently banishing him to the anti-matter universe of Qward.”

Ooooooooh, every party has a pooper, that’s why we invited Thaal!  In short, this figure is not good and by far the worst in the set.  In long?  Well, the original Series 3 Sinestro wound up too short during production.  Something about his skinny stature just got sort of lost, and they made him just  a little guy.  People weren’t thrilled.  This one, which was originally shown on a skinnier body, overcorrects the problem by moving Sinestro over to the medium base body, which is just too big for him.  He’s still using the original head, though, which was sized for a much smaller body, and therefore looks way too small.  And to top it all off, he doesn’t get his mask, which is somewhat understandable, but also still rather annoying.  I just don’t care for this one.

TOMAR RE

“An ordinary scientist from an obscure planet named Xudar, Tomar-Re never dreamed he would be chosen to serve in the Green Lantern Corps, much less that his name would one day stand for courage and integrity, assigned to protect Space Sector 2813, Tomar-Re distinguished himself so thoroughly in the line of duty that the Guardians of the Universe promoted him to their elite honor guard.”

Ha-ha!  I’ve already reviewed this one, way back in #0422!  All by his lonesome.  Really, I’m just putting him here from the turnarounds, since I wasn’t doing those yet in 2014.  Also, to reassert that even with the other four around, this one’s still my favorite, so there.

THE ME HALF OF THE EQUATION

I never saw this set at retail.  Not a huge shock, since I wasn’t doing much hunting, and I almost never went to Walmart at the time.  I recall being sort of “meh” on most of the set, so I ultimately settled for Tomar on his own, because he was the main one I wanted anyway.  But, the other four landed in front of me just before the end of last year, and I felt compelled to finish the set.  I’m glad I did.  Sure, Sinestro sucks, but I knew that up front.  Guy and John aren’t perfect, but they’re both still decent.  I really do like this version of Hal, though.  In general, I think it’s a set that’s better as a whole than as individual figures.

#3675: Sinestro

SINESTRO

SUPER POWERS (MCFARLANE)

Though it served as the most visible media presence of DC’s heroes for a long stretch of time, Hanna Barbera’s Super Friends didn’t have any direct toy tie-ins. Both Mego’s World’s Greatest Superheroes and Kenner’s Super Powers were clearly drawing from the show’s influence, of course, but there were a great many characters, even notable ones from the comics, who didn’t get coverage. Green Lantern and his evil counterpart on the Legion of Doom, Sinestro, were both left out of Mego’s run, and while GL found his way into Super Powers, Sinestro remained unlucky, not getting his first figure until the DC Direct days. It’s fitting, then, that he would be added to Super Powers by (what remains of) DC Direct!

THE FIGURE ITSELF

Sinestro was released in Series 6 of McFarlane’s Super Powers continuation, which they released under the DC Direct banner. He’s the first of two Sinestros released in close succession, this one based on the character’s classic blue and black, while the other is his more modern Corps uniform. He pairs off in Series 6 with an updated Hal Jordan. The figure stands about 4 3/4 inches tall and has 7 points of articulation. Sinestro has typically been depicted as tall and lithe, something this figure’s stature captures. He’s taller than the average Kenner Super Powers figure, but in the way he should be, rather than in an “out of scale” sense like some of the line’s earlier offerings. The sculpt is all-new, and pretty decent. It definitely feels like it captures the Kenner style pretty well. You can certainly see where elements of it were designed with re-use for the Corps model in mind, meaning he does ultimately wind up with some costume details that are a little outside of the intended era. The collar in particular is just a little too modernized in its shaping. His head is likewise a tad more modernized, calling to mind his DCAU appearances, and lacking the larger forehead typical of classic Sinestro. None of it’s bad, mind you, and Kenner wasn’t always 100% faithful in their own figures, so he doesn’t look entirely out of place. Sinestro’s color work is pretty solid, hitting the usual colors, and feeling pretty on the mark for what a Super Powers paint job should look like. Sinestro is packed with his power battery, which, like the figure is maybe just a touch too modern. In reality, Kenner would have probably just reused Hal’s, so getting something different at all isn’t so bad.

THE ME HALF OF THE EQUATION

After being won over so thoroughly by the Blue Beetle, I’ve gotten more invested in this line as a whole, so I’m looking more at some of the other figures that would fit well with my vintage set. I happened to find this guy at the Walmart close to my work. He’s not quite as on the mark as a few of the others I’ve looked at, but he’s still a marked improvement on the earlier releases, and a solid counterpart to my vintage Hal.

#0205: Hal Jordan, Sinestro, & Abin Sur

HAL JORDAN, SINESTRO & ABIN SUR

JUSTICE LEAGUE UNLIMITED

IMG_1737

It’s no secret that I’m a pretty big Green Lantern fan. Due to this, I own a metric ton of Green Lantern crap. Good or bad, I own it. There is, however, one Green Lantern item that I will never, ever, own. That is the Hal Jordan Green Lantern figure based on the character’s brief cameo in the Justice League Unlimited episode “Once and Future Thing.” Mattel decided to give this figure out as a gift to a number of Warner Brothers executives one year. I believe the number of figures in existence is in the low three-figures. Unsurprisingly, the figure rarely shows up on the aftermarket, and when one does, they go for prices far beyond what someone like me can reasonably pay.

So, I was bummed. I mean, Hal Jordan was one of my favorite characters of all time, and I would be unable to own him in the primary DC scale of the time. What a bummer! Then came the set I am reviewing today, offering me another chance at the character. No, it’s not the same, but it’s something, so I’ll take it.

THE FIGURES THEMSELVES

Hal Jordan, Abin Sur, and Sinestro were released as part of a San Diego Comic Con exclusive three pack, meant to sort-of promote Justice League: New Frontier. Hal and Abin are based loosely on their appearances there, and Sinestro is based on his GL look in the comics. All three feature swappable heads, to allow Hal to be displayed in either of his GL uniforms. It’s debatable as to whether it works or not.

HAL JORDAN

Hal is presented here in his Ferris Aircraft-issued test pilot gear. He stands just shy of 5 inches tall and has 5 points of articulation. He features a brand new head and legs, along with the basic medium build torso and arms and a coat add-on previously used on Mr. Terrific. The head looks pretty accurate to what Hal looks like in New Frontier, so that works. The re-use all works appropriately as well. The paint work is okay, though there are some fuzzy lines in a few spots.  Hal has no accessories, unless you want to count Abin and Sinestro…

ABIN SUR

Abin Sur is presented here in the GL uniform he wore in his original appearance. This was a bit of a contentious point amongst fans, because it’s not the design he sported in his appearance in the Animated universe. It was done to facilitate the Hal Jordan thing, but I guess I can see the annoyance. Abin is built on the medium build body with a brand new head. The head is a bit big for the body, but overall it looks nice, and the medium body was the best of the bucks Mattel used for this line. The paint is serviceable, though it also still has a few fuzzy lines.

SINESTRO

Sinestro is shown here in his GL uniform, which he never actually sported in any of the animated material, but they wanted to do the interchangeable heads thing, so there it is. Sinestro is a complete re-use. He’s built on the same medium body as Abin, and shares a head with the previous Sinestro figure. If it ain’t broke, don’t fix it. The paint is nice and clean, cleaner than the other two, in fact, which is something I suppose.

THE ME HALF OF THE EQUATION

I picked this set up off of Matty Collector following SDCC. It was mostly painless. It’s not the same as the super rare Hal, but this set isn’t too bad. It provides a perfectly fine version of Hal, and Abin and Sinestro are pretty cool too. It’s not a thrilling set, but it is cool for someone who’s a fan of Green Lantern, which is a bill I fit. Yay.

#0095: Green Lantern & Sinestro

GREEN LANTERN & SINESTRO

SUPER FRIENDS (DC DIRECT)

Today, I’ll be looking at another piece of my extensive Green Lantern collection, though unlike the last time, this is a set I acquired because I actually wanted it, not just because it said “Green Lantern” on the box.  This time around, it’s a 2-pack from DC Direct’s Super Friends line released a while back.  In particular, it’s Green Lantern and his nemesis Sinestro based on their appearance from the 70s TV show Challenge of the Superfriends.

THE FIGURES THEMSELVES

This pair was released as part of the 3rd wave of 2-packs from DC Direct’s Super Friends line.

GREEN LANTERN

Up first, it’s the hero of the set, Green Lantern.  Unsurprisingly, he’s based on the character’s appearance from the show.  He stands a bit over 6 inches tall and has 9 points of articulation.  The articulation can be a bit tricky, as the ball joints on the arm have a tendency to pop out, leaving poor Hal armless.  The sculpt on the figure is very smooth, and all the lines are very clean, which is appropriate for the design they were trying to capture.  In particular, the head sculpt really got the character design from the show down.  The paint is also clean and basic, but that’s no surprise, given the look they wanted.  The pupils seen through the mask can be a bit unnerving, but that’s in line with his design.  The figure included a lifesize version of his ring from the show, a display stand with the Super Friends logo, and a miniature version of the hall of justice.

SINESTRO

Next, Green Lantern’s arch-nemesis, Sinestro!  Sinestro is, of course, based on his appearance in the show.  He stands just shy of 7 inches tall and has the same 9 points of articulation as his pack mate.  Unlike GL, Sinestro doesn’t seem to be plagued by the arm issue, which makes him a bit easier to pose and such.  Sinestro’s sculpt is a bit more detailed than GL’s, since his character design was a bit more intricate.  A lot of the musculature of the sculpt is very similar, just stretched out to convey Sinestro’s tall, lean build.  Like with GL, the head sculpt is really the shinig point of this figure, giving Sinestro the perfect sinister grin.  Sinestro also includes a lifesize model of his ring from the show and a display stand with the show’s logo.

THE ME HALF OF THE EQUATION

Green Lantern and Sinestro were a birthday gift from some family friends who were aware of my intense Green Lantern fandom.  I greatly appreciated it, and it was actually my only figure of Sinestro for a good long while.  I still really like this set, as it’s a great representation of a popular take on the characters.  I can’t look at them without the Challenge of the Super Friends theme starting up in my head.