Tag Archives: Star Wars

#2302: Wedge Antilles

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

WEDGE ANTILLES

STAR WARS: THE BLACK SERIES (HASBRO)

“A talented young Rebel pilot from Corellia, Wedge Antilles survived the attack on the first Death Star to become a respected veteran of Rogue Squadron.”

Though he may be on the short list of characters to appear in all three of the original Star Wars films, poor Wedge Antilles has always had to play the waiting game when it comes to action figures.  He was completely absent from the vintage line, and while he’s subsequently gotten a decent selection, it took well over a hundred figures to finally get him in added to The Black Series.  Better late than never, right?  And, as luck would have it, his inclusion in the line just so happens to nicely coincide with the character’s long-awaited return to the franchise in The Rise of Skywalker.  How about that?

THE FIGURE ITSELF

Wedge Antilles is figure 102 in the Black Series line-up, the last figure of this assortment numerically.  He’s also the second of the two OT-based figures in the set.  And, believe it or not, he’s only our second OT X-Wing pilot in the line, which seems almost baffling.  The figure stands just under 6 inches tall and he has 29 points of articulation.  In contrast to the rest of the line-up from this assortment, Wedge is predominantly built out of re-used parts, namely the body of the X-Wing Pilot Luke figure from way back in the very first assortment.  The two wore the same uniform in the movie, and the actors are within an inch of each other in height and pretty similar in build, so it’s hard to blame them for going for the re-use.  That said, I think some collectors were hoping they might take this opportunity to finally give us someone in the padded pilot gear from Empire, thereby keeping Wedge as a totally unique figure.  Of course, then he wouldn’t match the Luke we have, or the inevitable Biggs figure, and wouldn’t have the added benefit of giving Hasbro an easy way of filling out the line-up with some easy re-use.  Plus, it’s not like Wedge figures have a history of getting new parts, so it’s really not much of a shock.  On the plus side, the X-Wing Luke body is honestly one of the best of the earliest entries in the line, and while some of the articulation isn’t quite as well worked in as more recent figures, it still holds up.  Wedge definitely doesn’t look out of place with the rest of his assortment at all.  He does get a new head, of course, which sports a pretty decent likeness of Dennis Lawson.  The hair’s a little weird, because it doesn’t match any of the un-helmeted shots of Wedge we get in the movies.  It’s not totally off base, though, and honestly I imagine a lot of people will be keeping the helmet on him anyway.  With the helmet on, the likeness is pretty much dead on.  The paintwork on Wedge is essentially the same as on the X-Wing Luke figures, but it’s worth noting that there are a few small, easy to miss changes between the two figures, which really don’t amount to much.  Beyond that, he’s got the expected changes to the head, which is again using the face print tech.  Wedge is packed with his helmet, which is a re-decoed version of the one included with Luke, as well as a DH-17 blaster rifle, which is something we don’t see Wedge carrying in the film, but is standard issue for the Rebels, so it makes sense.

THE ME HALF OF THE EQUATION

Wedge is a prominent figure for me because Wedge is honestly my favorite Star Wars character.  He was at the top of my wishlist for this line from the very start of it, ever since I got that first X-Wing Pilot Luke back in 2013.  It’s been a long wait for him, and he’s a pretty straight forward figure, but he was never the less worth the long wait.  He’s not overly flashy or anything, and perhaps doesn’t have the flair of the others in this assortment, but he’s still my personal favorite.  Now, how about that Empire variant.  And maybe a Rise version as well.  And a TIE pilot version.  Heck, let’s just reinstate the Evolutions packs, and get them all at once.  It’s the only way to be sure.

I picked up this Wedge from my friends All Time Toys, and he’s still available here.  If you’re looking for cool toys both old and new, please check out their website and their eBay Store.

#2301: Cara Dune

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CARA DUNE

STAR WARS: THE BLACK SERIES (HASBRO)

“A veteran of the Galactic Civil War who fought under the banner of the Rebellion, Cara Dune is a seasoned warrior.”

The first round of Black Series figures for this past Force Friday gave us two Mandalorian-themed figures, and the two Best Buy exclusive offerings have added two more, but there was one fairly prominent character who had as of yet not seen any coverage. Well, one fairly prominent character whose presence in a toy line wouldn’t have spoiled the show’s big reveal at the end of the first episode, anyway.  Introduced in Chapter 4, Cara Dune is fairly quickly established as a well-crafted foil to the Mando, and though she wouldn’t end up quite as prominent in the show’s first season as early promotional material might have suggested, she still has quite a role.  And now let’s look at the action figure, shall we?

THE FIGURE ITSELF

Cara Dune is figure 101 in the Black Series line-up.  She’s the only Mandalorian-based figure in this particular five figure assortment.  The figure stands just over 6 inches tall and she has 29 points of articulation.  In terms of motion, Cara is on par with the rest of her assortment, being a nice half-way point of mobility and sanctity of sculpt.  There are definitely spots on this figure that I assumed would be restricted (namely the shoulders and the neck), which ended up a lot less restricted than I’d expected, and that’s a definite plus.  As it stands, she can comfortably wield her rifle with both arms, and even manage some pretty decent action poses.  She also doesn’t have too much trouble remaining standing, at least with my figure.  The sculpt here is definitely a nice one, and possibly the nicest of this current assortment.  The face is undeniably Gina Carano, and is easily one of the best likenesses we’ve gotten from a Black Series figure, right up there with Tarkin and Dryden in terms of accuracy.  I definitely dig it.  The body sculpt’s proportions are a good match for Carano’s build, and her outfit is quite nicely recreated at the smaller scale.  The multi-tiered construction of the armor adds a nice bit of depth to the figure, and makes the whole thing look nicely put together.  Cara’s paint work is definitely the most impressive affair from this assortment.  On its surface, it’s a little monochromatic, as is true to the show.  However, there’s actually quite a bit going on.  The face is again using the printed styling, which looks incredibly lifelike here.  It also includes her very small little Rebel tattoo on her cheek bone, which is quite an impressive touch.  Her shocktrooper stripes on her arm are also impressive, as are the wear and tear marks on her armor, which give it a suitably lived-in feel.  Much like Jannah, Cara is a quite well-accessorized figure, including her large blaster rifle, a pistol, and a knife.  The rifle includes a removable sling, and the pistol and knife both have spots on Cara’s person, allowing for everything to be stowed somewhere on the figure, which is always cool to see.

THE ME HALF OF THE EQUATION

Cara’s figure had good timing, first arriving at retail right on top of her appearance on the show, which made her a pretty easy purchase for me.  Though, continuing the overall trend of this assortment, I wasn’t expecting to like her quite as much as I do.  There’s a lot of cool stuff going on with this figure, and it results in one of the most solid standard Black Series releases I’ve messed with in a while.  Now, here’s to getting a Mando that actually matches this figure.

Cara was purchased from my friends at All Time Toys.  If you’re looking for Star Wars, or other toys both old and new, please check out their website and their eBay storefront.

#2300: Luke Skywalkwer – Yavin Ceremony

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE SKWALKER — YAVIN CEREMONY

STAR WARS: THE BLACK SERIES (HASBRO)

“On Yavin 4, the Rebels hold a ceremony to award the heroes who bravely fought to destroy the Death Star.  Luke Skywalker receives his medal for bravery from Princess Leia.”

Do you ever have that moment where you have something really monumental and important in front of you, and you think to yourself really hard about how this is the absolute worst time to screw up, and you focus so hard on that only to inadvertently screw up terribly on something that you’ve managed to do correctly hundreds of times previously, to the point where it should be second nature to you?  Because we know Hasbro had that moment.  And today we’re looking at that moment.  Behold, Luke Skywalkwer—crap, I mean Skwalker!

THE FIGURE ITSELF

Luke Skywalkwer – Yavin Ceremony is figure 100 in the Black Series line-up.  Of course, thanks to re-numberings and exclusives, there are far more than 100 figures in the line, but getting to the number is a momentous occasion nevertheless.  And before we get any further, yes, you read all those instances of Luke’s surname above correctly; on the packaging for the momentous number 100 figure, Hasbro somehow managed to misspell poor Luke’s last name, the name of a whole saga, three times in two different ways.  As someone who’s worked in publication design, my heart goes out to the poor designer who let that slip through.  They’re probably never going to live it down.  The truth is, if this had been any other numbered release, I don’t know that it would have caught quite as much flack, but unfortunately it’s the big 100, the one that people who very well may have never bought another Black Series will hold onto, and the one that people are far more likely to keep in package.  Heck, I’m a loose collector, and even I’m hanging onto the box for this one.  Admittedly, in my case it’s purely for the typos, but the point still stands.  This one’s probably going to be well-remembered.  Well, enough about the box, let’s talk about the actual Luke Skwalker figure inside!  As the properly written section of his name denotes, he’s wearing his slightly more uniform-esque get-up from the ceremony on Yavin IV that ends the first film.  Though only seen in one scene in the main films, the look served as Luke’s primary attire for his portion of the Holiday Special (I know) and recently saw a resurgence when it was used prominently in Marvel’s Star Wars comics.  This figure was actually released a little earlier last year as a con-exclusive with several additional accessories and a Marvel-inspired box.  As has become the trend with such exclusives and their inevitable re-releases, the core figures in the two packages are essentially identical.  The figure stands just under 6 inches tall and he has 27 points of articulation.  Apart from being shared with the exclusive release, this Luke has a unique sculpt.  It’s our first truly new OT Luke since figure 21, and the line’s come a long way since then.  The result is definitely the most technically impressive Luke we’ve gotten in The Black Series.  The articulation is definitely one area of notable improvement for the most part, although the hip joints on this guy have a weird set up which places a definite learning curve on using them.  I’m not much of a fan.  Like the Jabba’s Palace figure, this Luke uses the new style of head construction with separate pieces for the hair and face, which makes for slightly more depth in the sculpt.  On my figure the hair and head don’t line up 100% perfectly, but it’s close enough to work.  It’s honestly Hasbro’s best Hamill, displacing the Jabba’s Palace figure’s very brief moment with that title.  The body construction is in a lot of ways very similar to Bespin Han, which is fine by me, because that was a good lay out for a figure, and the designs of the two costumes are also pretty similar.  His paintwork is fairly standard for the line at this point.  The base color is all pretty clean, and he’s got the printed face which looks plenty realistic.  The con-exclusive release had a lot of extras, where as this one is comparatively pretty light.  Both figures include the blaster, and this figure also includes the medal, making him specific to the ceremony.  That’s all he gets, which leaves the rather glaring omission of a lightsaber.  He doesn’t have it during the scene in the movie, so I guess there’s that reasoning, but that didn’t stop them from including both a saber and a helmet with the pilot Luke.  It’s also not a new piece, so it feels like it should have been an easy inclusion.  I’ve got a few of my own, so I can loan him one, but it’s a little annoying.

THE ME HALF OF THE EQUATION

As a kid, Cermony Luke wound up as my default Luke for a good while, and as such I’ve always had something of a soft spot for this particular look.  I like that the comics brought the design back, and I was very happy to see this figure unveiled.  He’s a proper choice for the big 100 number, and even with the goofiness surrounding the packaging and its many errors, this is a really nifty figure, and probably the best Black Series Luke.

I picked up this guy from my friends All Time Toys, and he’s still available here.  If you’re looking for cool toys both old and new, please check out their website and their eBay Store.

#2299: First Order Jet Trooper

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

JET TROOPER

STAR WARS: THE BLACK SERIES (HASBRO)

“Specialized Stormtroopers of the First Order, Jet Troopers soar into battle equipped with agile rocket packs”

Alright, let’s keep this Black Series ball rolling.  Heck, let’s trek down that Rise of Skywalker path again while we’re at it.  Rise added the usual bank of new troopers, as each film tends to do.  While the Sith Troopers got a lot of the marketing focus, the coolest new additions for me were the Jet Trooper.  A Jet-equipped Stormtrooper isn’t a new concept by any means, but it’s a cool one nevertheless, and I was quite a fan of the new design they were sporting.  Lucky for me, that design is one of the earlier Rise of Skywalker designs to get covered by The Black Series.

THE FIGURE ITSELF

The Jet Trooper is figure 99 in the Black Series line-up, the second of the two Rise figures in this second post-Triple Force Friday assortment.  He was also one of the figures to receive a “Carbonized” variant on the Force Friday launch, which is the same mold, but with a different finish.  Also, a little fun fact: aside from Rey, the Jet Trooper is the only design to be available across the three styles Hasbro is producing.  Not even Kylo gets that honor.  The figure stands 6 inches tall and has 29 points of articulation.  The Jet Trooper is probably the most impressed I’ve been with a Trooper’s articulation at this scale, with a respectable range of elbow motion right out of the gate, hips that aren’t terribly restricted, and an amazingly improved range of motion on the neck joints, especially when compared to the Sith Trooper from the last assortment.  He’s not quite as stable on his feet as his GoA counterpart, but he’s better than the Vintage Collection version, and I only had one fall during photos.  Like both of his smaller-scale counterparts, the details on his armor are nice and crisp, and his design means that the sculpt is largely unimpeded by the articulation.  Unlike both smaller Jet Troopers, he’s got a little bit of extra posability on the jet pack itself, which adds movement to the two thrusters.  It’s a nice little touch to be sure.  And, though real-world inspired, this figure maintains a lot of that same sleekness that I enjoyed so much in the GoA figure.  Perhaps the only moderately baffling element to this figure’s sculpt for me is the presence of a holster spot on his right thigh, despite the fact that his included gun doesn’t include a matching tab.  I can only guess this was in order to facilitate a straight re-use of the mold for the upcoming Sith Jet Trooper, who will presumably be including the same armaments as the standard Sith Trooper.  The paint work on this figure more or less matches the GoA figure.  It’s basic, but that’s what you expect from one of these troopers.  He does get a few more black spots, but curiously loses the outlining of his faceplate from the prior figure, despite that outline being present on other versions of the design.  There’s still a sculpted element to it, so it’s not totally gone, but it’s much easier to miss.  The Jet Trooper is on the lighter side for accessories, including only his unique blaster rifle.  The regular troopers don’t have anything else in the movie, but it’s still a little light.

THE ME HALF OF THE EQUATION

I liked the Jet Trooper design as soon as I saw it, but I was admittedly unsure I’d need him in every style, and wasn’t sure what role, if any, he’d play in the final film.  After seeing the movie, and finding the Jet Trooper to actually be the best utilized of the new troopers, I was very happy to have picked him up across the board.  In a similar fashion to Jannah, I opened him up after the movie, already with heightened expectations, only to discover that he was even better than I’d been anticipating.  I’d go so far as to say that the Jet Trooper is the best designed and implemented trooper of the sequel trilogy Black Series offerings, if not possibly the best Black Series trooper as a whole.

The Jet Trooper was picked up from my friends All Time Toys.  If you’re looking for cool toys both old and new, please check out their website and their eBay Store.

#2298: Jannah

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

JANNAH

STAR WARS: THE BLACK SERIES

“From an oceanic moon, Jannah leads a band of warriors, ready to charge against the forces of the First Order.”

Okay, I’ve got just a ton of stuff piling up for review here at the FiQ offices (aka the spare room in my house where I take all my photos), and I’m trying to make it through the backlog as best I can.  For right now, “as best I can” is gonna translate into a lot of theme weeks.  I just made my way through an entire series of Marvel Legends, and now I’m switching over to a week with Hasbro’s other big collectors line, Star Wars: The Black Series.  While prior movies under the Disney banner have more or less gotten several entire assortments of figures devoted to them, Rise of Skywalker is having to share, meaning that it’s a slightly slower role-out for them on the movie’s new characters and looks.  The second assortment did get us our first new character, former First Order operative Jannah, who I’ll be looking at today!

THE FIGURE ITSELF

Jannah is figure 98 in the Black Series line-up, the first numerically in the second post-Triple Force Friday assortment, as well as the first of two Rise of Skywalker-based figures in the line-up.  The figure stands right at 6 inches and she has 27 points of articulation.  She’s an all-new sculpt. In terms of the articulation work-in, there are some pluses and minuses.  There’s some really good range on the elbows, which does cause them to look a little off when in extreme poses, but I really don’t mind that. The hips are a bit more restricted, it would seem in an effort to preserve the sculpt.  Again, I don’t mind, but it can be a little limiting.  I had a very hard time getting much posability out of the ankles on my figure, which I’m not sure is an intended design thing; it felt like they were stuck.  Whatever the case, it made keeping my figure standing rather tricky, which got frustrating during the photo session for this review.  The sculpt is based on the only design she gets in the movie.  It’s a fairly decent design, sort of pairing off well against Rey’s initial scavenger look, but with a slightly more almost post-apocalyptic feel, denoting her move to a more backwater life after leaving the First Order.  Plus, it’s got goggles, and goggles are always cool.  The face sports a passable likeness of Naomi Ackie; it’s perhaps not the best the line has produced, but it’s far from the worst, especially when it comes to the sequel characters.  Some of that’s coming from the hair, which is more of a solid chunk than it is in the film.  In their defense, there’s not a lot that can be done about that; the translation to plastic is always going to make such things look a little bit off.  The body is a solid sculpt as well, with a lot of really nice detailing on her various elements of clothing, especially in the wrinkles on the pants.  She’s got a cape piece, which is removable in theory (you’ll need to take the head off to get it off of her), and despite being a little bit floaty when posing, it’s a pretty nice piece. Jannah’s paint work is pretty decent overall.  It tends to be more on the brown side of things (true to her movie design), but there’s enough of a mix of colors to keep her visually interesting.  She’s again got the printed face, which works pretty well for this figure.  There are some spots of slight misalignment on the base paint, especially on the shoes, but it ultimately doesn’t prove too distracting on the final product.  Jannah makes out quite well on the accessories front, especially for a Black Series figure.  She’s got her bow, a single arrow, a bundle of arrows, a quiver, and a small blaster pistol.  I definitely dig the bow, and after how many Hawkeye figures with no arrows, the selection is certainly refreshing.

THE ME HALF OF THE EQUATION

I actually got Jannah (and the rest of her assortment) just prior to the movie’s release.  I didn’t think much of her at the time (and in fact didn’t open her until after seeing the movie), but after seeing the movie, I don’t mind having her so much.  After opening the figure up and playing around with it a bit, I like it even more than I’d expected to, with the accessories in particular being the real highlight of the figure.  All that said, the figure does seem a little lonely at the moment.

Jannah was purchased from my friends All Time Toys, and is still available here.  If you’re looking for cool toys both old and new, please check out their website and their eBay Store.

#2289: Death Star Trooper

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DEATH STAR TROOPER

STAR WARS: POWER OF THE FORCE II (KENNER)

“Grand Moff Tarkin created this select force of soldiers to defend the galaxy’s ultimate weapon, the Death Star. These elite troopers manned the gun towers during the Battle of Yavin, a conflict that resulted in the Death Star’s destruction.”

The original 12 Kenner Star Wars figures were largely populated by the film’s most distinctive characters, or even a few stand out designs, such as the Tusken Raiders and Jawas.  The slight odd-man out to this line-up was the Death Squad Commander, later renamed the Star Destroyer Commander, a uniformed and helmeted Imperial trooper based on a character that really didn’t get much action in the film proper.  When the line was brought back in the ’90s with an even deeper reach of characters, it would still take most of the run to finally get a follow-up to that original character, this time named the Death Star Trooper.

THE FIGURE ITSELF

The Death Star Trooper was released in the Power of the Force II line in 1998.  He and Ree-Yees were the only two knew figures in 1998’s final main assortment, resulting in both of them being quite difficult to get at their time of release.  General lowered interest in Power of the Force as well as a reissue of this figure brought his price way down, to the point that he’s pretty much just as easily found as any other figure from the line.  The figure stands 3 3/4 inches tall and he has 6 points of articulation.  He was an all-new sculpt at the time and….well, it’s certainly an interesting one.  By ’98, the buffed-up, pre-posed look had been pretty much weeded out of the line.  This guy definitely wasn’t buffed up, but somehow he manages to be one of the most pre-posed the line ever produced.  And exactly the purpose of that pose?  Who knows?  He looks like he’s going for a jog or something.  I mean, the Death Star is a pretty big place.  They gotta get around somehow.  Aside from the posing, the sculpt is honestly pretty good, with a solid recreation of the uniform, and even a removable helmet to boot!  Sure, he’s got some wonky headgear going on beneath it for some reason, but it’s still pretty nifty.  His paintwork is fairly basic, but does what it’s supposed to do, and looks pretty decent.  The trooper was not seen armed in the film, but for this figure was armed with a ridiculously large blaster rifle, which despite the pre-posing, he still can’t hold very convincingly.

THE ME HALF OF THE EQUATION

I’ve got the original Death Squad Commander, which has given me a soft spot for the general concept of this figure, but I didn’t own this one growing up, largely due to how rare he was at the time.  I ended up getting him during one of my big Power of the Force splurges at All Time.  He’s not anything amazing or special, but he’s at the very least not as boring as some of the other Imperial guys.

#2286: C-3PO

Posted by Ethan Wilson in Reviews and tagged with , , , ,

C-3PO

STAR WARS: GALAXY OF ADVENTURES (HASBRO)

C-3PO presents an interesting conundrum for toy makers.  He’s undoubtedly one of the most distinctive characters in the franchise, and certainly most fans are down for a toy of him.  That said, he’s never been particularly action-oriented, so he’s maybe not the easiest sell to kids.  If he’s produced in the same numbers as other main characters, he lingers, but if he’s under-produced he goes for silly money.  How do you distribute such a character?  Revision cases are, for once, not a bad solution.

THE FIGURE ITSELF

C-3PO joins Han as one of the two new figures in the second series of Galaxy of Adventures.  He’s only in this assortment right now, and given how things tend to work with 3PO, I wouldn’t be shocked if this is all we see of him for the time being.  3PO had essentially the same look for all three of the original trilogy films, and that’s the one that this figure goes for, which is a decent enough choice.  The figure stands a little under 5 inches tall and he has 21 points of articulation.  That’s a lower articulation count than the usual, due to the lack of elbow joints.  Admittedly, not even the initial Black Series version had those joints, so I can’t fault them for leaving those joints out here.  3PO is sporting another new sculpt for this line, and is again playing into the style of the line as a whole.  He’s not super different from how he usually looks, just a little more svelte in the limbs and lower face.  It’s kind of halfway between Clone Wars and Droids.  It certainly gets all of the appropriate elements to sum up the character, though.   If I have one minor complaint about the figure, it’s that his neck is a touch long for my taste, but beyond that, it’s another strong sculpt for the line.  3PO’s coloring is predominantly handled via molded plastic, which works fine, and is certainly better looking on a stylized figure like this than it would be on a more realistic 3PO.  The only paint is on the eyes, the wires, and the undersides of his hands.  It’s all pretty good on mine, but I know the eyes have been pretty wonky on most samples.  3PO doesn’t have any accessories, but he does have one of the most involved action features of the line.  Pressing the button on 3PO’s back sends his head, legs, and left arm flying off, as if he’s just been blasted to parts.  Given how frequently 3PO gets knocked apart, this is certainly an appropriate feature for him, and it works pretty nicely, without impeding his actual playability too much.

THE ME HALF OF THE EQUATION

I got 3PO at the same time as Han, again courtesy of Max.  I was definitely more interested in Han, but I’m loving the line enough to want to pick everything up right now, and 3PO was along for the ride.  He’s a little more gimmicky than most of the line, but it works for him, and he’s still a very fun figure.

#2285: Han Solo

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HAN SOLO

STAR WARS: GALAXY OF ADVENTURES (HASBRO)

At launch, Galaxy of Adventures‘ primary focus was on the latest installment in the Star Wars franchise, Rise of Skywalker, but it was not without a few throwback figures.  For the second assortment, they stepped the Original Trilogy content up, adding two of the trilogy’s core characters to the line-up.  It’s hard to imagine any Star Wars line without a Han Solo, and fortunately we don’t have to do that for Galaxy of Adventures, because here he is!

THE FIGURE ITSELF

Han is one of the two new figures in the Series 2 pack-out for Galaxy of Adventures.  As of right now, he’s only available in this particular assortment, but I fully expect that he’ll be mixed into another case packout this year, since that seems to be the way Galaxy of Adventures is going to be working.  While Luke was based on his Return of the Jedi appearance and Vader was definitely an amalgamation, Han is in his A New Hope attire.  It’s actually a little bit surprising, since his smaller GoA figure was in the Bespin look, but either one makes for a strong Han appearance.  The figure stands 5 inches tall and he has 23 points of articulation.  His articulation is pretty much the same as all of the other GoA articulation, meaning that he’s quite posable, and also quite steady on his feet.  There’s a slight restriction at the right hip, where he’s got the holster, but it’s actually not as bad as it is on most recent Hans.  You can still get him to sit without too much trouble.  Han’s sculpt follows the stylization of the rest of the line, and I really feel that Han translates the best of the human figures.  Something about his design just really jibes well with the aesthetic.  It helps that he’s also got one of the most expressive faces in the line to date; that cocky grin is perfect for Han, especially his earlier incarnation.  It’s not a Ford likeness, but it’s a good character likeness for Han, and not even trying for the Ford likeness honestly puts him ahead of most versions of Han that aim to be more realistic.  Like other figures in the line, he’s just generally got a very clean appearance about him, which works well in figure form.  Han’s paintwork is by and large pretty clean; there are some slight spots of bleed over on the stripes of the pants, but other then that he looks quite good.  Like the Rey from the two pack, the coloring on the face is stepped back a notch from the first series, making for a slightly better look in my eyes.  Han is packed with his usual blaster, which fits nicely in his hand or his holster without issue.  He also has a spring-loaded arm, much like others in the line.

THE ME HALF OF THE EQUATION

Han was on my list of figures I wanted even before I’d tried out the rest of the line, mostly because his prototype was just one of the better ones they showed off in that initial wave of photos.  He was definitely high on my want list.  Fortunately, Max was able to score one for me just before the holiday season.  He’s a very solid figure, and easily one of my favorites from the line so far.

#2284: Kylo Ren vs Rey

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SUPREME LEADER KYLO REN VS REY

STAR WARS: GALAXY OF ADVENTURES (HASBRO)

At the tail-end of last year, I covered the first chunk of figures offered in Hasbro’s recently-launched Galaxy of Advetures line.  There were a pretty sizable amount of figures available at the line’s launch, along with an exclusive Luke figure fairly shortly after.  Then it was time to move into the line’s real second round of product, made up of three new pieces.  I’ll be covering all three items this week, starting things off with the least “new” of the three, a Reylo-themed two-pack.

THE FIGURES THEMSELVES

Kylo and Rey are the line’s second multi-pack, following the Droids release from launch.  They’re a Target-exclusive item, which appears to have been a slightly later in the game decision, since there wasn’t really much promotion of that fact.  They started hitting shelves in late November of last year.  Both figures included are slight tweaks of their single releases.

KYLO REN

Definitely the selling point of the set for most, Kylo’s the figure that has the most noticeable changes, the most visible of which is the brand-new unmasked head.  It’s a decent piece, matching with the rest of the human heads in terms of styling and character vs actor likeness.  The paint seems like a slight toning down compared to some of the single releases, with less color throughout the face.  I like this a little more, so I’m glad to see them pulling it back a bit.  From the neck down, he’s the same as the single release, which is fine by me, as I liked that release a lot.  In terms of accessories, he loses the hooded cloak, which is a little sad, but gets to keep his helmeted head and lightsaber, so he ends up with the same number of extras.  The helmeted head is ever so slightly different from the regular in terms of paint, but it could honestly be a case by case thing.  Something that I certainly hope is more a case by case thing is how tight the neck joint is on my figure.  When I swapped the heads and went to swap back to the unmasked, the ball joint came out of the helmet the wrong way, and it took quite a bit of work to get them properly swapped back.  I’ve got both Kylos, so I’m fine with leaving this one unmasked, but that would be a very different situation for someone who only has this release.

REY

The core Rey figure here is far less changed from her single release than Kylo.  The only real differences are mostly superficial.  The face paint is again toned down a bit, and the joints seem a touch tighter on this Rey than my single.  Beyond that, they’re the same figure.  She does get one additional accessory this time: her bag, present on both the Vintage Collection and Black Series figures, but missing from the GoA release.  It’s nothing major, but it’s cool that they gave her a little something extra.

THE ME HALF OF THE EQUATION

I had contemplated holding off on the single Rey until this set was released, but ultimately didn’t, so then I wasn’t sure I was going to grab this set at all.  After falling in love with this line, though, I had a hard time saying no to another figure, especially when I had literally everything else they’d released.  The neck joint issue on Kylo is annoying, but I’m otherwise pretty happy with this set, and was even able to set Max up with the extra Rey figure.  Ultimately, I think most people will chose either the set or the singles for these, and if I’m honest, the set’s a slightly better value.

#2281: Major Vonreg

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MAJOR VONREG

STAR WARS RESISTANCE (HASBRO)

“A vicious, daring man of few words, Major Vonreg is known for his custom crimson TIE fighter and his lightning fast strikes against anyone who dares intrude into First Order territory.”

For my last day of Post-Christmas reviews for this year, I’m taking a look at another figure from Star Wars Resistance.  Yesterday’s figure, Kaz, was part of the show’s titular resistance, but today’s figure hails from the other side of the war, the First Order.  While the majority of the First Order we’ve seen have been their ground troops, Resistance‘s focus on pilots translated to both sides.  Kylo took the part of star pilot of the First Order in the films, but the show introduced its own villainous lean pilot, Major Vonreg.

THE FIGURE ITSELF

Major Vonreg is another basic figure from the first (and only) assortment of Star Wars Resistance figures.  He was one of three villains available present in the line-up.  The figure stands 3 3/4 inches tall and he has 5 points of articulation.  He’s an all-new sculpt, based on one of the show’s more distinctive designs.  Clearly, he’s got the standard First Order TIE pilot as a starting point, which is fine by me.  He’s a little more armored, and he’s got an all-new helmet design, which calls back to the Clone Pilots and is definitely one of the coolest First Order designs.  It’s sleek, it’s imposing, and it makes him pretty distinctive.  Of the three Resistance figures I’ve looked at so far, Vonreg is the only one to be fully armored up.  This makes the stylization from the show a little less evident, meaning this figure actually doesn’t look too out of place with the standard movie fare.  That makes him even more versatile, and I’m all about it.  The sculpt sports some decent detail work, especially on that underlying jumpsuit.  Despite not actually having a face, he’s actually one of the more detailed figures from the line.  The paintwork on Vonreg is a fairly distinctive look…or at least it was before we had a whole sub-division of all red troops.  Of course, I guess he could double as a Sith Trooper Pilot if you were so inclined.  Whatever the case, the all red look is a good look, and the variations of shades help him from being too bland.  Vonreg is packed with a small blaster pistol.

THE ME HALF OF THE EQUATION

Between yesterday’s review and today’s, I’ve managed to watch a few episodes of the show, so hey, I’m not a total novice.  Not that the first couple of episodes have much of Vonreg here, but at least I’ve got some background.  Like yesterday’s figure, Vonreg was given to me by Cheyenne, who was determined to get me at least a few figures I didn’t have.  Vonreg is another pretty fun figure, aided further by his ability to fit in not just with figures from this line, but also from the main movie line.  He’s a solid trooper figure, even if he is technically a named character.