Tag Archives: Star Wars

#1635: C-3PO

Posted by Ethan Wilson in Reviews and tagged with , , , ,

C-3PO

STAR WARS: POWER OF THE FORCE II (KENNER)

“Designed as a protocol droid, C-3PO’s main programming function is to interact with human society. He is an interpreter fluent in over six million galactic languages, specializing in the areas of etiquette and translation – especially important during diplomatic missions. To aid in these tasks, he is equipped with microwave and olfactory sensors, photoreceptors, vocabulator speech units, energy transducers and broad-band antenna receivers. He was programmed with an elegant, human sounding voice, but more often than not C-3PO is heard whining and bickering with his companion, the astromech droid R2-D2.”

Hey, the Solo product officially dropped yesterday!  Yay…I guess?  I’ve not yet actually gone out and started tracking all of that stuff down, but I do have a metric ton of *old* Star Wars stuff to review.  I’m continuing with the Power of the Force theme I’ve had going for a little while now, and taking look at C-3PO!

THE FIGURE ITSELF

C-3PO was part of the first series of Kenner’s Power of the Force II line, hitting shelves in 1995.  He’s the third version of 3PO in the 3 3/4 inch scale, following up on the two from the vintage line.  As his design remained essentially the same for the entirety of the Original Trilogy, this figure serves to represent all of those appearances.  He stands 3 3/4 inches tall and has 6 points of articulation.  For 3PO, this was really about all the movement he’d ever need.  The figure’s sculpt is a fairly decent recreation of his film design.  As with all of the figures in this line, he was given a slight stylistic change-up, but it’s definitely more minor here than it was on other figures from the same assortment.  Compare him to, say, the first Han from this line, and you’ll see that he’s far less dramatically pre-posed and has his overall proportions far less changed from reality.  There’s actually a rather impressive level of detail on this figure’s sculpt, even managing to show through the vac-metalizing process and everything.  Clearly they had learned from their  experience with the vintage line.  Interestingly, though it wasn’t a selling point as it would be on later figures, this figure’s legs can be popped out of their sockets with relative ease, allowing for his slightly disassembled look from Empire.  Sure, it’s not 100% accurate, but it’s a fun little extra.  Though the figure is vac-metalized, that doesn’t mean he lacks paint like his vintage counterparts.  He gets the proper detailing for all of his wiring and such at his mid-section, a first for a 3PO figure.  The only minor issue with this figure’s paint is his right lower leg, which is gold like the rest of him, instead of its proper silver color.  Since the upper and lower leg were all one piece, there was unfortunately no way to do this correctly while still maintaining the shiny finish.  3PO included no accessories, but I’m not sure what you’d actually give him.

THE ME HALF OF THE EQUATION

I had 3PO growing up.  I don’t actually recall where he came from.  Shameful, I know.  Over the years, I ended up losing one of the legs, so a replacement was in order.  I ended up finding a second one at Yesterday’s Fun while vacationing with my family over the holidays.  As far as 3PO figures go, there are certainly better ones out there, but this figure’s actually held up a lot better to the test of time than many of his compatriots.

#1622: Darth Vader – Vantablack

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

VANTABLACK DARTH VADER

STAR WARS: THE VANTABLACK SERIES (HASBRO)

“Once a heroic Vantablack Jedi Knight, Vantablack Darth Vader was seduced by the Vantablack side of the Force, became a Sith Vantablack Lord, and led the Vantablack Empire’s eradication of the Vantablack Jedi Order. He remained in service of the Vantablack Emperor for decades, enforcing his Vantablack Master’s will and seeking to crush the fledgling Vantablack Rebel Alliance.  Vantablackly.”

Have you ever looked at something and thought it could use some more light devouring, piercing, soul-sucking absolute blackness?  No?  Well, that’s ’cause you’re silly.  The obvious answer was “vanta-yes!”  Enter Hasbro with their brand new product line, combining all of the coolness of their Star Wars: The Black Series line with the absolute blackness that is Vantablack.  Behold, Star Wars: The Vantablack Series.

THE FIGURE ITSELF

Vantablack Darth Vader is the inaugural figure in Star Wars: The Vantablack Series‘s first assortment, alongside Vantablack TIE Pilot, Vantablack Death Trooper, and the ultra-secret-mega-chase-one-per-case-completely-theoretical Vantablack Panther.  Why’s there a Marvel figure in there?  Disney, that’s why.  All of those are all well and good, but today’s the main event, the main man, Vantablack Darth Vader, representing Darth Vader as he’d be if he were more Vantablack-y.  This figure stands 6 1/2 inches tall and he has…points of articulation?  I think there’s like around 30?  I don’t know, it’s hard to tell.  Absolute blackness and all.  You try to get an accurate count on something you can’t see!  Vader’s sculpt is..uhh, well there’s…I mean, uhh, it’s new, I think?  It feels new.  Or maybe it’s old.  I suppose it could be the same as the last one.  I’m not used to reviewing my figures by touch.  The quality is good, though.  I think.  There’s probably tons of details there.  It sure feels like it.  I think it’s accurate to the movies, but having never touched any of the Vader suits from the movies, I can’t quite give an accurate reading.  If my fingers don’t deceive me, this is an ANH Vader.  Good choice, guys, that one’s the best feeling one.  The paint on this guy is all Vantablack all the time.  It’s obviously got consistent coverage, since I can’t see any reflection at all.  Vantablack Vader is packed with his usual lightsaber, but with the hilt also in Vantablack.  It’s cool, but I’ve already dropped it on the floor, and what with the Vantablack…I mean, do you know how hard it is to find an item that doesn’t reflect?

THE ME HALF OF THE EQUATION

I stumbled on this guy at my Toys R Us.  I mean that literally.  The box is *also* in Vantablack, and, as I noted, that stuff doesn’t reflect, so it’s kind of hard to see, especially since TRU’s literally just stacking this stuff on the floors now.  Since I’d already left a sizable shoe-print on the box, I figured I should probably pay for it.  I greatly look forward to having more of these figures that I can’t really see.  Maybe I’ll put them in a dark corner of the room.

#1621: Momaw Nadon (Hammerhead)

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MOMAW NADON (HAMMERHEAD)

STAR WARS: POWER OF THE FORCE II (KENNER)

The smash success of both A New Hope and its tie-in line of toys in the late ‘70s created a demand that Kenner was having trouble meeting.  They needed more figures for their toyline, but had produced the major players, apart from the less exciting likes of Tarkin, or Uncle Owen and Aunt Beru.  They were out of named characters.  How do you solve this problem?  You give names to unnamed characters, specifically the very unique crop of aliens seen in the Mos Eisley Cantina.  Along the line, Lucasfilm decided that Kenner’s names weren’t quite cutting it, and introduced their own.  Thus, for his second figure, Hammerhead became Momaw Nadon.

THE FIGURE ITSELF

Momaw Nadon was released in the 1996 assortment of Power of the Force II figures.  The figure stands 4 inches tall and has 6 points of articulation.  As an earlier entry in the line, Momaw has a fair bit of pre-posing going on here.  With that being said, there’s something about his more alien nature that makes it seem like less of an issue on this figure (though he has some slight difficulty with standing).  As far as detail work goes, Momaw’s actually pretty solid.  There’s plenty of texturing on the skin, which makes for some nice variety.  I quite like the hands, which are uniquely posed and very full of character.  His vest is an add-on piece, split at the sides to allow for removal.  It’s a little difficult to get over his head, but once you due, there’s an undergarment of some sort, which I suppose is a nice touch.  In terms of paint, Momaw is rather on the monochromatic side, being mostly shades of warm brown.  It’s more or less accurate to the source material, so there’s that.  No random turquoise or anything, like his original figure had, but that was what people wanted at the time.  The fools!  Momaw was packed with a big blaster thing, based on nothing he has in  the movie, but I guess he needed something, and it’s fun in a goofy sort of way.

THE ME HALF OF THE EQUATION

Momaw was another figure picked up from the Farpoint charity auction.  Slowly but surely, I’m putting together a complete collection of Power of the Force II figures.  It didn’t start out that way, but here I am now, buying Momaw Nadon.  Once you buy a Momaw Nadon, there’s really no going back, right?

FiQ Friday Fab Five at 5 #0003: Top 5 Princess Leia Figures

Posted by Ethan Wilson in Friday Fab 5 and tagged with , , ,

Hey FiQ-fans!  It’s the final Friday of another month, and that means it’s time for another FiQ Friday Fab Five @ 5!  For today’s list, I’m jumping over to that galaxy far, far away, looking at the top 5 Princess Leia Organa action figures!

#5:     Leia as Boushh – Shadows of the Empire (Kenner)

Leia’s disguised look from the beginning of Return of the Jedi is one of her coolest looks from the whole franchise.  It’s had a lot of good figures, and it gave us the best version of Leia in the ’90s Power of the Force II re-launch.

#4:     Princes Leia – Star Wars (1978 – Kenner)

It’s hard to beat the original, right?  Well, I mean, not *that* hard, since she’s fourth on the list, but still.  This Leia is a bit dated, but like all of the vintage figures, she’s just got a lot of charm.

#3:     General Leia Organa – The Last Jedi (Hasbro)

After the less than stellar offering from The Force Awakens, this version of the late Carrie Fisher as she was seen in The Last Jedi is one of the best Hasbro’s put out.  What she lacks in poseability, she more than makes up for in sculpting.

#2:     Hoth Leia – The Vintage Collection (Hasbro)

Leia’s Hoth look is a good middle ground between her regal attire and her more action-oriented personality.  The vintage collection’s version of the costume from 2010 is to date the best version of the costume in action figure form.

#1:     ANH Leia – Star Wars: The Black Series (Hasbro)

Remember what I said about it being hard to beat the original?  Well, it wasn’t that far off.  Plain and simple, this is the look most people associate with Leia, and Hasbro delivered a truly awesome figure, albeit on their second go at it.  The initial release had a lackluster head sculpt, but the improved sculpt from the 40th Anniversary line is top-notch.

#1607: Han Solo – Cantina

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HAN SOLO – CANTINA

STAR WARS: POWER OF THE FORCE II (HASBRO)

“Inside Mos Eisley’s cantina, Han Solo just negotiated a lucrative deal to transport two men to Alderaan – enough to pay off his debt to crimelord Jabba the Hutt. But it’s too late: bounty hunter Greedo has come to collect – though all the Rodian gets is a shot to the chest from Solo’s blaster.”

Towards the end of their run with Power of the Force II Hasbro officially started putting their name on the line, and also used this as sort of an excuse to circle back around and give us new and improved standard versions of the main characters.  After going a whole year with no Han Solo figures (which seems downright crazy if you ask me), they offered up a brand new figure of him in his classic smuggler’s outfit from A New Hope.

THE FIGURE ITSELF

Cantina Han Solo was released in the 1999 assortment of Power of the Force II figures.  He was designed specifically to go with a new version of Greedo, and is meant to directly recreate Han from the encounter with Greedo in the Mos Eisley Cantina.  The figure stands 3 3/4 inches tall and he has 10 points of articulation.  He had knee joints!  You can’t begin to imagine how big a deal that was back in ’99.  It was all so that he could sit at a booth at the cantina.  A non-existent booth, but hey, that’s not the point.  Han’s sculpt is one of the finest the POTF2 line had to offer.  His proportions are actually pretty realistic, he’s slightly pre-posed but not extremely so, and he’s even got a pretty decent Harrison Ford likeness.  The detail work on his clothing, the shirt in particular, is quite impressively handled.  I also really like the posturing of his hands; it adds a lot of life and character to the figure.  Han’s paintwork is all pretty standard fare, but it’s still pretty good.  It’s all pretty cleanly applied, and matches up pretty well with the movie.  Han is packed with his usual blaster (which was notably less over-scaled than prior versions).  Also, as a 1999 release, he was part of the whole CommTech venture, so he comes with a CommTech stand.  I never actually got the reader, but it still works well as a somewhat unique looking stand, so there’s that.

THE ME HALF OF THE EQUATION

I remember getting this guy with some money I’d gotten for my 7th birthday.  My parents took me out to Toys R Us to use the money, and this guy was amongst the figures I bought.  I’m not entirely sure why, but I just liked him for whatever reason.  To this day, he remains perhaps my favorite Han Solo figure in my collection, and definitely one of my favorite Power of the Force II figures.  He holds up quite well!

#1593: Luke Skywalker – Ceremonial Outfit

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LUKE SKYWALKER – CEREMONIAL OUTFIT

STAR WARS: POWER OF THE FORCE II (KENNER)

“In the main throne room of a Massassi temple, Luke Skywalker receives an honorary medal for his part in the destruction of the Imperial Death Star.”

There’s a lot of potential Luke Skywalker variants out there.  He got one distinct design for each movie, plus his pilot gear, and at least one other major look for each film.  For A New Hope, he actually has four distinct looks.  My personal favorite is one that doesn’t actually appear for all that long; it’s the snazzy dress outfit he wears during the film’s final scene, set during an award ceremony.  It’s had less figures than other looks, but as a variant of Luke Skywalker, it’s still had its fair share.

THE FIGURE ITSELF

Luke Skywalker in his Ceremonial Outfit was released as part of the 1997 assortment of Star Wars: Power of the Force II.  He was the seventh of the eleven Lukes in the line, and the second-to-last unique outfit, prior to the line switching over to variations of Farmboy Luke.  It was actually one of two Ceremonial Lukes released in 1997, the other being part of the Princess Leia Collection.  It was a good year for a look that hadn’t yet seen an action figure release.  The figure stands 3 3/4 inches tall and has 6 points of articulation.  This Luke marked the debut of Kenner’s second POTF2 Luke head sculpt.  As noted in the past, it’s not really much closer than the first attempt at a Hamill likeness, but I do tend to prefer this one.  The rest of the sculpt is unique to this particular figure.  As far as this line goes, it was pretty solid.  Sharp detailing, reasonable proportions, and a fairly neutral stance, all of which add up to an above average figure from this particular line.  The paintwork on Luke is pretty standard stuff, which is to say the colors are a good match for the film and the application is all sharp.  There’s no slop to speak of, and everything stays within its appropriate lines.  Luke was packed with a blaster pistol and his medal from the ceremony, which are both missing from my figure, sadly.

THE ME HALF OF THE EQUATION

This was a fairly early Luke in my collection, and is probably one of the Power of the Force figures I purchased closest to his initial release.  I got him from KB Toys, during a trip to the mall with my Grandmother.  He was purchased alongside a whole bunch of others, but the others were all meant to stay at her house, with this guy being the one who would be going home with me.  He’s remained a favorite of mine, and served as my go-to Luke for a good chunk of time.

#1589: Cassian Andor, Imperial Deathtrooper Specialist, & Jyn Erso

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CASSIAN ANDOR, IMPERIAL DEATHTROOPER SPECIALIST, & JYN ERSO

STAR WARS: THE BLACK SERIES

 

There was one major piece of Rogue One merchandise I haven’t yet gotten around to reviewing.  It was sitting there in the store, staring at me, waiting, watching, and….uh, waiting.  Sorry, didn’t have a third “w” word, there.  Anyway, I finally have said piece of merchandise, so, without further ado, here’s this set with Cassian, Jyn, and a Deathtrooper!

THE FIGURES THEMSELVES

This three pack was a Target-exclusive, and started hitting shelves about a month after the main Rogue One product launch.  Of the three figures included, only Cassian is a truly unique figure.  The Deathtrooper has some minor tweaks as well, but Jyn is exactly the same as both her standard and SDCC-exclusive releases.

CASSIAN ANDOR

“An accomplished Alliance Intelligence officer with combat field experience, Captain Cassian Andor commands respect from his Rebel troops with his ability to keep a cool head under fire and complete his missions with minimal resources.”

Despite his placement in a big exclusive set, the Cassian seen here is the standard version of the character, seen most frequently throughout the movie.  It was oddly scarce in the initial product launch, but by the end of all the Rogue One product, it did end up fairly well represented.  It’s definitely the selling point of this release.  The figure stands 6 inches tall and he has 27 points of articulation.  His head is shared with the Eadu version, which admittedly wasn’t the best Cassian sculpt we got, but it looks a little bit better here than it did on that figure.  The rest of the figure is a unique sculpt, and it’s a definite improvement over the Eadu look.  The details are generally a lot sharper, especially on the jacket, and the overall aesthetics just seem to flow a bit better.  He’s still a little bulky for Luna, but not as bad as the Eadu figure.  The movement is a lot better as well, thanks to the slightly less restrictive design.  Just like the sculpt, the paint on this Cassian is a marked improvement on the last figure.  The face is still a bit off, especially the beard, but it’s definitely a step up.  The eyebrows are less caterpillar-like, and the scruff is a little more reserved, so that’s a plus.  The rest of the body is pretty solid overall.  There’s a little bit of fuzz in a few spots (like the tops of his boots), but generally it’s pretty sharp.  Like his oh-so-awesome small-scale counterpart, this Cassian is packed with his modular blaster rifle, which maintains the oh-so-awesome-ness.

IMPERIAL DEATHTROOPER SPECIALIST

“The elite soldiers of Imperial Intelligence, Death Troopers are encased in specialized stormtrooper armor with a dark, ominous gleam.  These soldiers serve as bodyguards and enforcers for Director Krennic, a highly placed officer within the Advanced Weapons Research division of the Empire.”

For the most part, this is a figure I’ve looked at before, back when it was just the standard Deathtrooper.  But, apparently, as a “Specialist,” this guy is entitled to a whole web gear load out, with a shoulder pauldron, some ammo pouches, and a bunch of grenades.  It’s a cool piece, and totally removable, should you just want the standard Deathtrooper.  Beyond that, his sculpt, paint, and accessories load out is the same as the basic variant.

THE ME HALF OF THE EQUATION

I passed on this set when it was new, because paying the cost of three figures and only getting one I actually wanted seemed a bit much.  Just after the new year, however, Target got around to marking the set down, to about the cost of a standard Black Series figure. That brought into a reasonable range for me, so I finally got it.  I’m glad I finally got this Cassian; he’s definitely my go-to figure of the character.  I’m also not unhappy about the Deathtrooper variant, though I can’t say it’s the sort of figure I would have paid full retail for.  Ultimately, I think bundling Cassian into this three-pack was a mistake, and I think the fact that the set ended up on such deep clearance speaks to that.  I get Hasbro’s desire to get as many Jyns as possible out there, but this exclusive really would have worked much better as a two-pack with Cassian and the Trooper.  Three times was just one time too many for the standard Jyn to get a straight re-release.

#1579: Han Solo – Millennium Falcon Gunner Station

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HAN SOLO – MILLENNIUM FALCON GUNNER STATION

STAR WARS: POWER OF THE FORCE II (KENNER)

Two weeks ago, I discussed Kenner’s deluxe offerings from their Power of the Force II toyline.  Specifically, I looked at Luke Skywalker and the Millennium Falcon gunner station.  That particular item was designed to work in tandem with another of the deluxe offerings, Han Solo, packed with another of the gunner stations.  I’ll be looking at that particular item today!  And awaaaaaaay we go!

THE FIGURE ITSELF

As with the prior set, Han and the Gunner station were released in 1997 as part of the third set of deluxe Power of the Force II figures.  This Han was based on his end of the movie gloved and headset-ed look, which has been the source of a few Han figures (such as the previously released 30th Anniversary one).  The figure stands 3 3/4 inches tall and has 5 points of articulation.  For whatever reason, he lost the waist movement.  Don’t know why, but there it was.  This figure is rather similar in construction to the first PotF2 Han, but he doesn’t actually share any parts with that figure.  He’s still got some of the wonky proportions, and the head isn’t the best likeness of Harrison Ford, but he’s definitely a bit toned down from the earlier offerings.  I’d place him about on par with the Bespin Han figure, where he’s still within the general confines of the line’s style, but looks a fair bit more like an actual human being.  That’s certainly a plus.  The paint work on Han is fairly standard stuff.  Nothing exceptional, but it’s certainly passable work, especially for the line.  There’s less slop here than on the corresponding Luke. The color palette matches the other Hans from the line, so he was certainly consistent.  Han didn’t include any small accessories, but he still had the gunner station, which was identical to the one that Luke came packed with.  If you had both stations, they could be connected by the platform running behind them.

THE ME HALF OF THE EQUATION

I got Luke when he was new-ish.  They also had the Han at that time, but I was a silly small child who only wanted Luke and not Han, so he went unpurchased.  It was only recently that I finally acquired this guy.  Lost In Time Toys had him out during one of their sidewalk sales in December, so I was able to pick him up for a pretty low price.  He’s a pretty solid offering for the time.  I could have seen him becoming my default Han had I had him back in the day.

#1575: Admiral Ackbar & First Order Officer

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ADMIRAL ACKBAR & FIRST ORDER OFFICER

STAR WARS: THE BLACK SERIES (HASBRO)

Star Wars fandom has a tendency to latch onto certain characters, and blow there contributions way out of proportion.  The biggest example of this is, of course, Boba Fett, but coming up close behind has got to be Admiral Ackbar.  Ackbar’s big claim to fame is a unique design and one highly memorable line.  Pretty much the only difference between him and Nien Numb (introduced in the same movie, and with about the same amount of screen time) is that Ackbar actually spoke English.  Despite all of this, there was a sizable chunk of people who were genuinely angry that Ackbar’s role in The Last Jedi was that of a background character….just like he has been for his entire existence.  I personally was happy to see him again in whatever role they could give him, and even happier to see him get a new action figure out of the whole thing.

THE FIGURES THEMSELVES

Admiral Ackbar and his pack mate, a generic First Order Officer, were released in a Toys R Us-exclusive two-pack as part of Hasbro’s Star Wars: The Black Series.

ADMIRAL ACKBAR

“Ackbar became a Grand Admiral in the New Republic, winning many victories, including the pivotal Battle of Jakku.  He retired to Mon Cala but was coaxed back into service with the Resistance by Leia Organa.”

Ackbar is no stranger to action figures, but this is his first time in the 6-inch scale.  He’s seen here in his uniform from The Last Jedi, which is different from his TFA uniform, which was in turn different from his RotJ uniform.  Each time, it seems his uniform’s gotten a bit less unique.  I don’t dislike his Last Jedi design, but Ackbar is really just wearing the same togs as everyone else.  The figure stands 6 1/2 inches tall and he has 27 points of articulation, which includes an articulated jaw.  Pretty swanky.  Ackbar’s sculpt is new to him, and it’s certainly impressive.  The best work is definitely on his head and forearms, which capture the prosthetics from the film quite nicely.  The head in particular does a great job of working in the jaw movement without disrupting the sculpt too much.  The rest of the figure is decently handled.  The uniform features the appropriate texturing and such, and the proportions match up well with the head and hands.  Because of the way the waist articulation is implemented, the overhanging flap on his jacket is cut off at the belt, which looks a little goofy and is hard to get properly aligned when posing him.  The paint on this figure follows the example of the sculpt.  The most impressive work is on the head and hands, which get a decent amount of accent work and the like.  The body is certainly passable, but there’s no accenting on any of the uniform, which looks a bit goofy and cheap.  Ackbar is packed with a standard rebel blaster, which he can hold in his right hand.

FIRST ORDER OFFICER

“The officers of the First Order military forces show unwavering allegiance to Supreme Leader Snoke, leading his massive armies and fleet in a relentless drive to dominate the galaxy.”

This is a figure we’ve seen most of before.  With the exception of the head, he’s identical to the First Order Disguise Finn figure.  Obviously, it’s a sensible re-use, and a great way of justifying the totally unique tooling for Ackbar.  Anyway, I liked Finn, so I like this figure.  His new head is suitably generic, so if you wanted to get a few of these, it wouldn’t look too terrible.  It’s got a slight resemblance to Vinnie Jones in my eyes, but I hardly mind that (even if it is a bit goofy to see such a head on such a scrawny body).  The paint on this guy is pretty much comparable to Finn’s, with the obvious changes to the head.  The face is a little sloppy, but the faded hair actually looks pretty decent.  Like Finn, this guy includes the small blaster pistol and removable hat.  He loses the riot baton, but I’m guessing those aren’t standard issue for officers.

THE ME HALF OF THE EQUATION

I saw this set once before the movie’s release.  I’d just dropped a bunch of money on figures the day before, so I decided to hold off.  Then I didn’t see the set anywhere for a month, and I started to worry a bit.  Fortunately, it showed back up, and I was able to snag one last month while on a trip out and about.  Ackbar’s the definite draw, and he’s a solid figure.  Not 100% sold on this particular costume, but it certainly could be worse.  The Officer’s not really anything special, but he’s a decent figure nonetheless and a welcome addition to my First Order ranks.

#1571: Rose – First Order Disguise, BB-8, & BB-9E

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ROSE – FIRST ORDER DISGUISE, BB-8, & BB-9E

STAR WARS: THE LAST JEDI (HASBRO)

A couple weeks back, it was announced that the remaining announced but unreleased figures from Hasbro’s basic Last Jedi line were being distributed solely by online retailers Entertainment Earth (at least in North America, anyway; the rest of the world may yet see them show up at regular retail).  This means, that, without any real fan faire, the set I’m looking at today, is the final piece of Last Jedi product to hit retail.  Weird.  Well, might as well review it. (EDIT: strike that, there’s the four pack that’s hitting alongside the home video release.  Forgot about that one.)

THE FIGURES THEMSELVES

Rose, BB-8, and BB-9E were part of the second assortment of “two-packs” for the Last Jedi line.  For those of you who have halfway decent counting skills, you may have noticed there are three figures in this supposed two-pack.  Hasbro presumably realized how silly it would look to try and sell a normal figure and a BB unit for the same price as two normal figures, so they did the wise thing and threw in a second BB.

ROSE – FIRST ORDER DISGUISE

Our second standard line version of Rose follows the Star Wars tradition of giving us variants of our heroes disguised as the enemy.  Rose is, of course, seen here in the First Order uniform that she wears alongside Finn when infiltrating the Supremacy. It’s kind of amusing to get her in this scale, since the corresponding Finn was a 6-inch figure, but not to worry, there’s going to be a Finn to match soon enough.  This figure stands 3 1/2 inches tall and has the usual 5 points of articulation.  Her sculpt is totally new.  Not surprising, since she’s got a whole different look.  It’s a decent sculpt, though I can’t say it’s quite as interesting to look at as her standard figure.  The uniform’s carefully pressed and everything, so there’s no real room for the fun texturing of the last figure.  I also don’t find the head to be sporting quite as strong a likeness as the prior figure, though it’s not like this one’s terrible.  Also, minor point of contention that I suppose isn’t 100% fair to hold against this figure but I’m gonna bring up here anyway:  Hasbro’s still being inconsistent about the way they handled the bottom sections of the tunics.  Hux had his sculpted as part of his legs, but Rose gets an overlay piece.  Given that they’re supposed to be in a variation of the same uniform, it’s the slightest bit annoying.  I’m not saying I mind Rose getting what I feel is the superior implementation of the design, but I do really wish Hasbro would fully commit one way or the other.  Rose’s paint is decent, though not without its flaws.  The big issue with my figure is the eyes, which aren’t lined up properly.  There were two sets at the store where I picked this up, and I assure you, this one was the better of the two.  Beyond that, it’s mostly pretty passable work.  There’s not a whole lot going on, but it’s a good match for what we saw on the screen.  Rose includes a standard First Order pistol, as well as one of the heavy guns first included with the FO Legion set.  Like the rest of the TLJ line, Rose is Force Link compatible.  I got: “I’m ready for my mission,” “Quickly, Stormtroopers are coming!”, “Quiet! We have to be careful,” “Take cover!”, and an assortment of blaster sounds.

BB-8 & BB-9E

Once again, the only way to get a BB-8 is as part of a multi-pack.  I think that’s just going to be this character’s lot in life, since selling him on his own just doesn’t seem practical at all.  Also along for the ride is his “nemesis,” BB-9E.  Both droids measure about an inch and a half tall and have a single ball joint at the base of their head.  Both of them sport brand new sculpts, which do a respectable job of capturing the droids from the film.  I like that the time was taken to give them both completely unique sculpts, as it keeps the set from getting too redundant.  Paint on these two is about what you’d expect.  I think BB-9E is a little cleaner, and just a slightly better looking scheme all together.  BB-8 suffers a bit from the lack of any sort of accent work, which causes the large sections of white plastic to be a little overpowering.  Both of these droids are also Force Link compatible, each playing a couple of clips of each droid’s “dialogue.”

THE ME HALF OF THE EQUATION

This is a set that eluded me for a little while.  For reasons I can’t really understand, Hasbro decided to pack this trio in a case with more of the two-packs from the first series, as well as the Rogue One-themed Chirrut and Baze pack.  As the only truly new pack in the case, this one was guaranteed to be the first one to go every time.  Fortunately, on the way back from putting my brother on an early bus to New York, I was able to stop by a Walmart that had just opened and put their stock out, meaning I was able to finally get these guys.  Admittedly, it’s not the most thrilling set, but I like all three figures included enough to feel they were worth tracking down.