Tag Archives: Star Wars

#0839: Rey (Jakku)

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

REY (JAKKU)

STAR WARS: THE BLACK SERIES

ReyWM1

“Rey is a resilient survivor, a scavenger toughened by a lifetime of dealing with the cutthroats of the harsh desert world of Jakuu.”

There’s one more major character I haven’t looked at in this latest round of The Force Awakens figures. In fact, she’s the lead character! Let’s take a look at Rey!

THE FIGURE ITSELF

ReyWM5Rey is part of the third series of the Walmart-exclusive Star Wars: The Black Series figures, alongside the previously reviewed Poe and Finn, as well as a re-released Han Solo from Return of the Jedi. The figure is 3 ¾ inches tall and has 26 points of articulation. I do wish her waist joint offered more movement, but her articulation is generally pretty solid. Rey is noted as being based on her “Jakku” appearance, which isn’t all that different from her look from the rest of the film. That said, this figure does feature Rey wearing gloves, which she only does during the film’s Jakku scenes, and all of her accessories are Jakku specific. Rey’s sculpt is similar to the larger 6-inch figure, but like Finn and Poe, there are enough differences to show that this is an original work. It’s definitely a top-notch sculpt; there are lots of great small details, and the texturing on her cloths is very nicely handled. Her proportions are fairly balanced (perhaps her arms could be just a touch less gangly, but that’s minor), and the head has a passable likeness of Daisy Ridley. The hair’s a little thicker than Ridley’s was in the film, but that’s forgivable, given the small scale. Rey does take a bit of a hit in terms of paint. The general application is not terrible, ReyWM3but she suffers from some rather sloppy spots. In addition, the joints for her ankles are cast in flesh toned plastic, which makes them stand out quite a bit against the brown of her boots. Lastly, she has the same slightly rosy cheeks as her larger scale counterpart, which, while a bit more subtle this time, exhibit a dot-matrix-style patterning (suggesting a printed paint app of sorts), which is a little distracting up close. Still, she fairs a bit better than either of her previously-reviewed figures, which show’s Hasbro’s at least getting a little better. Rey makes out quite well in the accesories department, including her signature staff (now with proper painted details), a back pack, and an alternate head featuring the head wrap and goggles she wears in her introductory scene. While thes parts are all re-used from prior Rey figures, the improved paint apps elavate them to a new level, and the complement the figure very nicely.

THE ME HALF OF THE EQUATION

Rey was the last of these figures I got. I ended up having to stop at five different Walmarts to find her, and when I finally did find her, she was the last one the store had, and she’d even been hidden under a Darth Vader figure. Rey was packed into cases in the same quantities as Finn and Poe, but as the lead, she’s proved to be the first figure to get picked up by most collectors (and she’s also become scalper-bait. Yuck!). In addition, she’s hands down the best figure in Walmarts’s exclusive line, and the best Rey figure currently available. Here’s hoping that Hasbro can find a way to get more of this figure out there, because everyone should have this figure.

ReyWM6

#0838: Kylo Ren

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

KYLO REN

STAR WARS: THE BLACK SERIES

KyloWM1

“A dark warrior strong with the Force, Kylo Ren commands First Order missions with a temper as fiery as his unconventional Lightsaber.”

Every story needs a villain, and for The Force Awakens, that’s good ol’ Kylo Ren.  A lot of people took issue with the character’s portrayal in the film, but I really enjoyed it, and look forward to seeing more of the character (and the makers of the next Fantastic Four film should take note on how to properly handle a vain, masked, megalomaniac with a bad temper).  I’ve only looked at one other Kylo figure, so why not look at another?

THE FIGURE ITSELF

KyloWM2Kylo was released in the second series of the Walmart-exclusive Star Wars: The Black Series figures, alongside yesterday’s Stormtrooper and a figure of Leia from A New Hope.  The figure is roughly 4 inches tall and he has 26 points of articulation.  The neck and right shoulder are somewhat restricted by the sculpt of the hood, but other than that, the articulation is pretty solid here.  The larger Kylo used cloth for the outer portion of Kylo’s robes, while the regular 3 ¾ inch figure opted to sculpt the whole thing.  This figure goes for the best of both worlds.  The upper half is entirely sculpted, while the lower half makes use of soft goods for the outer most skirt.  This allows for the hood to be a bit more controlled than it was on the larger figure, while still offering some extra movement on the legs.  I think this compromise works, though it does look just the slightest bit jarring at the changeover.  I wish the cloth skirt were just a touch shorter, but other than that, it works well. The sculpted parts are quite impressive, and offer a ton of really great texture work.  On a whole, the figure looks quite imposing, a trait I felt the larger figure lacked.  Kylo’s paint is fairly minor, given how much of him is just straight black, but what’s there is pretty solid.  The silver of the mask and belt looks good, and I definitely appreciate that they used a different finish of black for the gloves and boots.  Kylo is packed with his distinctive lightsaber, both lit and unlit, which seems a better solution than a removable beam.

THE ME HALF OF THE EQUATION

Kylo was picked up at the same time as Finn and the First Order Trooper, purchased for me by my Super Awesome Girlfriend.  Kylo was definitely one of the figures from this set that I wanted the most, seeing as I didn’t get one of the smaller scale Kylo’s back in September.  The 6-inch figure was a bit of a disappointment, but this guy definitely delivered, and he’s probably the best Kylo out there right now.

KyloWM3

#0837: First Order Stormtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

FIRST ORDER STORMTROOPER

STAR WARS: THE BLACK SERIES

FOTrooperWM1

“Equipped with sleek armor and powerful weapons, the Stormtroopers enforce the will of the First Order.”

Everybody’s gotta have some faceless minions, right? You just aren’t a credible threat without a few thousand faceless minions! So, why don’t I take a look at one of the quintessential faceless minions, the Imperial First Order Stormtrooper?

THE FIGURE ITSELF

FOTrooperWM2The First Order Stormtrooper is part of the second series of the Walmart-exclusive Star Wars: The Black Series figures. The figure stands just over 3 ¾ inches tall and has 26 points of articulation. The articulation still features the awkward hips, and the torso joint is rather loose, but hey, guess what! We finally have a 3 ¾ inch FO Trooper who can hold his blaster properly! Isn’t that swell? Well, it’s more bittersweet, really. I’ll get to that. The sculpt is all-new to this particular Trooper; it’s decent, but not as strong as some of the other Troopers we’ve gotten. He’s a bit on the scrawny side, especially for the rather bulky FO Troopers. Still, the basic design is pretty solid, and there’s some nice detail work, especially on the underlying bodysuit. Now, here’s where a few minor issues with the sculpt arise. First of all, there’s the issue of the neck peg, which is once again much larger than the other figures (such as Finn), preventing easy head swaps. Then there are the hands, which have a fairly loose grip, which, coupled with the slightly restrictive sculpt of the elbow joints, means the figure has a really difficult time holding his gun the right way. Which is a super bummer. What’s even more of a bummer is the paint; it’s all over the place. There’s pretty much no part of the figure that isn’t subject to a missed section of paint, or some bleed over. While he looks okay from a distance, he’s really sloppy up close. The FO Trooper is packed with both a large and a small blaster, just like his larger counterpart. As noted, the figure has difficulty holding them, but one can be stowed on his thigh, which is cool.

THE ME HALF OF THE EQUATION

I got the Stormtrooper at the same time as Finn, courtesy of Super Awesome Girlfriend. I’m a fan of the new Trooper design, so I was kind of looking forward to this particular figure. It’s hard to say I’m not disappointed a little by the end product. The joints aren’t as strong as they could be, the hands are badly sculpted, and the paint is pretty sloppy. That said, he’s not terrible, just a bit of a letdown. Could he be better? Absolutely. Could he be worse? Very much so.

FOTrooperWM3

#0836: Finn (Jakku)

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

FINN (JAKKU)

STAR WARS: THE BLACK SERIES

FinnWM1

“A trained warrior desperate to escape his past, Finn is plunged into adventure as his conscience drives him down a heroic, but dangerous, path.”

One can hardly have Poe without Finn. Those two have to stick together! So, let’s look at a Finn figure!

THE FIGURE ITSELF

FinnWM2Finn is another figure in the third series of the Walmart-exclusive Star Wars: The Black Series figures. As with Poe, the main draw of this figure is the higher detailing and higher articulation count than the regular 3 ¾ inch figures. The figure is about 3 ¾ inches tall and has 26 points of articulation. The articulation is much the same as Poe’s, which is to say it’s mostly good, apart from the slightly outdated hip joints (though they’re less of an issue here, since being able to sit easily isn’t essential for Finn). As the name notes, this is the Jakku version of Finn (though his Jakku look ends up being his main look for the movie). At first glance it looks like this figure might share a few parts (namely the head and coat) with the regular release Finn, but a closer look shows that all of these figure’s pieces are new to this release. The detail work on the sculpt is absolutely superb, and there’s tons of fine detail work that really makes this figure stand out. The level of texturing on the clothing, especially the incredibly subtle detailing on the shirt, are really impressive. The two previous Finn’s had a pretty decent John Boyega likeness, but I think this one beats both. While Poe’s figure was hampered by sub-par paint, Finn ends up a bit more lucky on that front. The base paint is all very clean, and the work on the face is some of the cleanest I’ve seen from Hasbro in some time. The jacket and the lower portion of his pants also get some nice accent work, which adds a touch of realism. The pants could stand to be a touch more subtle, but the overall look is good. Finn is packed with a blaster, the same one all the other Finn figures have had. He doesn’t really use it much in the movie, but it’s a unique looking gun. What’s more, the level of painted detail on this version is astoundingly good. If only Hasbro could handle all of the accessory paint this well!

THE ME HALF OF THE EQUATION

After finding Poe, I was eager to pick up the rest of the Force Awakens characters from this line. Finn here was purchased for me by my Super Awesome Girlfriend, at a slightly out of the way Walmart. Poe had a few issues that held him back, but Finn isn’t in the same boat, and ends up being the best version of the character we’ve gotten so far. Definitely glad I got him!

FinnWM3

#0835: Poe Dameron

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

POE DAMERON

STAR WARS: THE BLACK SERIES

PoeDamWM1

So, a slight aside: I do my very best to keep this site light and fun. Action figures are kind of my one outlet of pure enjoyment, and I like to pass that enjoyment on to others as best I can. Sometimes, the real world gets to me a bit, but I try my best not to let it influence my writing, but it gets really hard. Back in December, The Force Awakens was by far my favorite thing of the moment, and more than anything, I wanted to review Star Wars toys. So, I bought a whole bunch, took the pictures, and put them on the schedule. But, before I could get around to actually reviewing them, several outside forces cropped up, and managed to suck just about all the excitement I had for Star Wars toys right out of me. There’s a whole lot of fighting going on in the community, and I’m just not a fighter. I really just want to enjoy my toys. So, in the next five days, I’m going to do my best to review some figures I was really excited about, without letting the outside stuff get me down. As an advance warning, that probably means minimal introductory comments from me for a few days.

Anyway, sorry if I brought people down; let’s move onto today’s figure. It’s Poe Dameron, number one pilot in the Resistance.

THE FIGURE ITSELF

PoeDamWM2Poe is part of the third series of Walmart-exclusive Star Wars: The Black Series figures. Prior to the Force Awakens branding, Hasbro was running The Black Series in both 6-inch and 3 ¾-inch scales, but the rebranding led to the 3 ¾-inch line being nixed, in favor of a more expansive selection of the lower-end 3 ¾ inch figures. Fortunately, Walmart decided to carry the higher-end 3 ¾-inch figures as exclusives, giving collectors a chance at some better articulated versions of The Force Awakens’ main characters. Poe stands 3 ¾ inches tall and has 26 points of articulation. Articulation is one of the main selling points on these guys, and most of Poe’s joints are pretty well-handled. The only real problem areas are the hips, which use a somewhat outdated style of joint and are a bit of a pain to work with. Poe gets an all-new sculpt, which depicts him in his pilot gear, which, after seeing the film a few times, really feels like his definitive look. The sculpt of this figure has a fair bit in common with the 6-inch version of Poe, but a close examination of the two shows that it’s not just a shrunk down version of that one. The sculpt has a ton of great texture work, and it’s top-notch for the scale. Poe’s likeness seems to be the toughest one to crack for Hasbro. It’s hard to accurately judge the sculpt on this one, since it’s under some iffy paint, but it does appear to be Hasbro’s closest effort so far. Unfortunately, it’s under the aforementioned iffy paint. Most of the paint on this figure really isn’t that bad, but the face just doesn’t look right. It’s definitely the eyes and eyebrows. The pupils of the eyes are too low-set, and the brows are just too thin to properly capture Oscar Isaac. I’d love to say the eye issues are a one-off, but every version of this figure I’ve seen looked about the same. Poe includes his helmet and a small blaster. The helmet is a great piece, and it’s the first one not to look oversized, and the blaster fits nicely both in Poe’s hand and the holster on his belt.

THE ME HALF OF THE EQUATION

I was surprised by these figures, truth be told. I’d heard rumblings of them happening, but I hadn’t seen any actual confirmation. Then I caught pictures of Series 3 over the holiday, and knew I’d have to try and track them down. Poe was the first one I found; he was the only figure left at my local Walmart. None of the Poe figures so far have been quite right, and this one continues that trend. Were the paint on his face a bit better, he’d be the best version of the character, but as it stands, I still like my mash-up of the two 6-inch figures the best. Still, this guy’s not a terrible figure, and he’s probably the best small-scale Poe out there.

PoeDamWM3

#0829: Guavian Enforcer

Posted by Ethan Wilson in Reviews and tagged with , , ,

GUAVIAN ENFORCER

STAR WARS: THE FORCE AWAKENS

GuavianEn1

It feels like forever since I’ve done a Star Wars review. <Checks previous reviews> Okay, it’s only been two weeks. Well, that’s still too long! It’s time for another! Plus, I’ve still got to catch up on reviewing things I got before the holiday season came and threw everything out of whack. Anyway, here’s another Force Awakens-based review. Let’s have another look at the Guavian Enforcer, but this time with more of me knowing what the heck he is!

THE FIGURE ITSELF

GuavianEn2The Guavian Enforcer is part of the smaller-scale Star Wars: The Force Awakens line. He’s from the second assortment of the “Space” subset of the line (the same one as General Hux). The figure is 3 ¾ inches tall and he has 5 points of articulation. The Guavian’s sculpt is new to this particular figure, but it in many ways feels like a simple scale-down of the Black Series version of the character. It’s not, obviously, since that figure had a totally different articulation scheme, and the details were just the slightest bit different, but they’re pretty close. Which is good really, since it’s supposed to be the same design. The sculpt is definitely high-quality. The proportions are pretty great, and there’s a ton of texture and small detail work. The separate parts of the costume could perhaps stand to be a little more defined, but at this scale, the work is acceptable. The Guavian’s paint work is fairly straightforward; he’s molded in red, with paint for the black and silver bits. The application is passable, if not anything amazing. He lacks a lot of the more subtle work from the larger scale figure, which is a shame, but reasonable at the smaller scale, I suppose. The figure is packed with one of the two guns packed with the larger Enforcer (the shotgun looking one), as well as a piece the Build-A-Thingy for this subset. On the plus side, this one’s a giant gun, so it can actually be used as an extra piece for the figure, if you don’t plan to finish building the whatever it is.

THE ME HALF OF THE EQUATION

The Guavian Enforcer was purchased from a nearby Walmart, while I was out and about with my brother. He’s the very last TFA figure I picked up prior to seeing the movie, so therefore the last one I bought with no idea of his role in the film. Fortunately, I found the Guavians in the film enjoyable enough, and I do really like their design. So, I’d consider this figure a win.

GuavianEn3

#0812: Poe Dameron

Posted by Ethan Wilson in Reviews and tagged with , , , ,

POE DAMERON

STAR WARS: THE BLACK SERIES

PoePilot1

For day 11 of the Post-Christmas gift reviews, I’ll be taking one more venture into the far, far away galaxy of Star Wars. I really, really enjoyed The Force Awakens. More so than most movies I can remember, at least of those released in the last few years. I really can’t think of anything from the movie that I really disliked. Back before the film was released, when I was reviewing a bunch of figures I knew absolutely nothing about, I was somewhat intrigued by Poe Dameron, despite having next to nothing to go on as far as what the character would be like. Upon seeing the film, Poe quickly became my favorite of the new characters. All of the sudden, the two action figures I had just didn’t seem like enough. As luck would have it, I didn’t have to suffer through only having the two figures for very long, as Christmas brought me both the smaller scale Poe’s X-Wing Fighter set and the other of the two 6-inch scale Poes, which I’ll be reviewing today.

THE FIGURE ITSELF

PoePilot2Poe was released as part of the second series of the Force Awakens-branded Star Wars: The Black Series figures. He’s figure #07, which makes him numerically the second figure in this series, after Captain Phasma. The figure stands about 6 inches tall and has 25 points of articulation. The articulation is mostly pretty good, but the lack of back and forth movement on the wrists is more than a little frustrating. The last Black Series Poe I looked at was based on his jacketed look from towards the beginning of the movie, whereas this figure is based on his pilot look from the film’s second half. He’s a mostly unique sculpt, though I have seen the head before, by nature of getting the two-pack version of the character first. It is because of owning that figure that I can correctly diagnose that it is not the sculpt of the figure’s head that is to blame for it looking as hideous as it does. There is in fact a halfway decent Oscar Isaac sculpt hiding under the paint. The rest of the sculpt is pretty good, with lots of great texture work on the jumpsuit, especially the ribbing on the sides of the arms, and there’s also some very nice work on the layering of the PoePilot3various pieces of his outfit. The build of the figure feels perhaps a bit on the stocky side for Poe, but the flightsuit was somewhat bulky in the film, so it isn’t far off. When discussing the paint, one can’t exactly ignore the elephant in the room that is his head. I have no clue what happened here, but man is that face paint horrid. It’s proof positive that it doesn’t matter how good the sculpt is, a lousy paint job will kill it every time. Seriously, did Hasbro hand out pictures of Peter Falk as Columbo instead of Oscar Isaac as Poe? Because, when I see this guy, I expect him to say “oh, and there’s just one more thing…” and then solve a murder. The rest of the paint is actually quite good, with a number of washes to help bring out some of the sculpt’s finer details. Poe is packed with his helmet, a blaster pistol, and a spare set of ungloved hands. The extra hands are interesting, because they give the figure an extra four points of articulation, making the missing movement from the gloves all the more curious.

THE ME HALF OF THE EQUATION

Poe was another gift from my parents. He’s actually a figure I’d seen once or twice before the movie’s release, only to pass on him, due to the face paint. After seeing the movie, and discovering just how awesome Poe is, I realized that was a mistake, so I was very happy to unwrap this figure on Christmas morning. No excuses can be made for that head, but, on the plus side, it can easily be swapped with the two-pack version with relative ease, making a decent figure downright amazing.

PoePilot4

#0809: First Order Special Forces TIE Fighter

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

FIRST ORDER SPECIAL FORCES TIE FIGHTER (w/ FIRST ORDER TIE FIGHTER PILOT)

STAR WARS: THE FORCE AWAKENS

TIEFighterFO1

It’s day 8 of the Post-Christmas gift reviews. I’ll be continuing off of yesterday’s Star Wars: The Force Awakens-themed review, by taking a look at another of the franchise’s thrilling space ships. I can’t very well let the Resistance have all the fun, so let’s have a look at the First Order’s own TIE Fighter.

THE FIGURE ITSELF

TIEFighterFO2Since their inception, the TIE fighters have had their own specific branch of Troopers assigned to them, unsurprisingly titled “TIE Fighter Pilots.” Who could have seen that one coming? Pretty much everybody, that’s who. The TIE Pilot is a little on the short side (a common trait for TIE Pilot figures) coming in at a little under 3 ¾ inches tall.  He’s got the standard 5 points of articulation as well, in case you were wondering. The TIE Fighter Pilot appears to have an all-new sculpt, or at least a heavily tweaked version of the single-carded figure’s body sculpt. The TIE Fighter Pilot’s design hasn’t changed drastically since the Original Trilogy, but they appear to be a bit more armored and overall more streamlined than their predecessors. The sculpt is pretty decent overall, with lots of nice small detail work. The figure sports a removable helmet, which is a little bit on the bulky side and is a little soft on details, but is otherwise a pretty well executed piece. Underneath the helmet is a somewhat generic head, which works. Mine has this weird formation running down his forehead, but looking at pictures of other figures online, this appears to just be a malformation of the sculpt. So, I guess my TIE Fighter Pilot’s just got an awesome face scar that no one else’s has! Paint on the TIE Pilot is rather minimal. He’s mostly just molded in black, but he does have a few extra details here and there, such as the First Order insignia on his shoulders. His face also has a bit of paintwork, which actually looks a bit better than some of the other figures in the line. In addition to the removable helmet, the Tie Fighter Pilot also includes a small blaster pistol.

THE VEHICLE ITSELF

TIEFighterFO4The main focus here, is, of course, the First Order Special Forces TIE Fighter. Which is quite a long name, isn’t it? Like Poe’s X-Wing, the TIE Fighter requires a bit of assembly when removed from the box. The lower cannons need to be popped into place (which is just the slightest bit unnerving), as do the wings. Once put together, the TIE Fighter stands 11 ½ inches tall, 10 inches wide, and is 9 inches deep. It has an opening cockpit hatch, as well as a rotating cannon on the bottom. Over the course of the Original Trilogy, the design of the TIE Fighter slowly evolved. By the time of The Force Awakens, it has gone back to something not too far removed from the design in A New Hope. According to J.J. Abrams, there was originally a far more advanced TIE Fighter design, but it was ultimately decided to go with a slightly more retro look, to make the connection between the two more clear. The sculpt of the TIE Fighter is actually quite impressive, especially when compared to the X-Wing. It’s still a little under-scaled for the 3 ¾ inch figures, but the generally larger size of the cockpit means that getting the pilot in place is a fair bit easier here than it was with the X-Wing. Of course, the TIE Fighter in the film was built for two. This fighter has two seats, but they aren’t quite oriented like they are in the film, in part due to the size of the fighter and also due to the slightly limited articulation of the figures. Getting two figures in place is definitely tricky; Stormtroopers are too large to fit, so you’ll need to actually have one of the single carded TIE Pilots to make it work. The sculpted details on this are quite nicely handled. They’re still a bit simplified compared to the actual movie design, but all the important details are there and the ship as a whole looks pretty sharp. Also, small bonus: the top of the hatch has a spot to stow the pilot’s blaster, which is pretty cool.  The TIE Fighter is, fortunately, not plagued by as many construction issues as the X-Wing, but you will want to keep an eye on the wings. One of mine is TIEFighterFO3just the slightest bit warped. It’s really not noticeable unless you’re looking for it, but it’s annoying nonetheless. Like Poe’s X-Wing, paint is a key piece in why this is a “special forces” TIE Fighter. It’s denoted by the red stripe, on the fighter’s left side. The red is pretty consistent, though there are a few missed spots at some of the connecting points. The rest of the ship is more or less molded in the proper varieties of grey, so very little paint is used. I like this, because it makes for a sharper overall design. The TIE Fighter has two spring loaded feature. The first is a missile launching feature, activated by a button at the bottom, just below the cannon. The two missiles at the front launch, though the mechanism doesn’t appear to be as strong as the one on the X-Wing. The second feature is the wing-launching feature, which replicates what happens to the TIE Fighters when they’re shot in a space battle. There’s a button at the base of each wing, which pops them off. It’s a fair feature, but it does mean the wings will occasionally just pop off on their own.

THE ME HALF OF THE EQUATION

The TIE Fighter was another Christmas gift from my parents, just like the X-Wing. I really like this one a lot, and it’s better put together than the X-Wing. Of course, it’s not the X-Wing, which is a slight strike against it, but it is still fun. And when I opened this one, my brother may or may not have picked it up and chased me around the house while I played with my X-Wing.

TIEFighterFO5

#0808: Poe’s X-Wing Fighter

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

POE’S X-WING FIGHTER (w/ POE DAMERON)

STAR WARS: THE FORCE AWAKENS

PoeXwing1

For day 7 of the Post-Christmas gift reviews, I’ll be venturing back into that galaxy far, far away. However, this time I’ll actually be looking at something from the new movie.

Back when Kenner had just gotten the Star Wars license, and they were deciding on scale, George Lucas was adamant that the figures be small enough that in-scale ships were still a possibility, which led to the decision to use the 3 ¾ inch scale, and ultimately had an undying impact on the action figure industry as a whole. See, the ships were a key piece of the story, since you can’t very have those titular “Star Wars” without them. One of the more distinctive ships was the X-Wing fighter, the main ship of all our favorite Rebel pilots. The X-Wings have made a triumphant return in The Force Awakens, and a triumphant return to the toy aisles with today’s focus, Poe’s X-Wing Fighter.

THE FIGURE ITSELF

PoeXwing2Seeing as the name of this set is “Poe’s X-Wing Fighter,” it’s not really a huge shock that the included pilot is Poe Dameron. The figure is 3 ¾ inches tall and has the same 5 points of articulation as all the other 3 ¾ inch Force Awakens figures. Poe’s body looks to be the same one that was used on the single release Poe, though I don’t actually have one to compare. It’s a decent enough sculpt. The jumpsuit has a reasonable amount of texturing and there’s some nice layering to the sculpt. The vest seems a little soft in some areas, but not terribly so. The head sculpt is shared with the “Armor Up” version of the character. I liked it well enough when I reviewed that figure, and I like it well enough here. It’s not a perfect match for Oscar Isaac, but it isn’t terrible either. At the very least, it’s got a slightly better paint job (though the skin tone is definitely too pale). The rest of the paint is passable, but nothing tremendous. There’s a fair bit of bleed over in several areas, and the edges of the vest are fairly fuzzy. Poe includes a helmet and a small blaster. The helmet is actually really cool, if perhaps slightly oversized, and the gun looks to be the same piece included with Goss Toowers.

THE VEHICLE ITSELF

Let’s be honest here, nobody was really buying this set for the figure, were they? No, the selling point is the awesome X-Wing fighter he’s meant to fly! Out of the box, there’s a tiny bit of required assembly. The cannons and the nose of the fighter are packed separately from the main vehicle, so they have to be attached, and there are also a few small decals to be placed inside the cockpit. Once assembled, the main body of the vehicle is 15 ½ inches  in length and it has a 13 inch wingspan. The X-Wing has 2 points of “articulation” for the cockpit and the landing gear. The cockpit could stand to open just a bit more, but other than that, the basic movement is pretty smooth. The X-Wing fighters in The Force Awakens got an all-new design (officially dubbed the T-70), inspired by Ralph McQuarrie’s original concept drawings from the first movie. It’s a slightly more svelte, less cobbled together look than the prior T-65. The toy gets a new sculpt designed to replicate the design from the film. Some changes have definitely been made for the sake of a slightly easier to produce toy. Chief among them is the decision to scale the whole thing down just a bit. It’s really not that evident, except for poor Poe having to do some serious slouching to fit in the cockpit with the top shut. In addition, some of the more intricate details of the craft have been made less intricate, which gives the whole thing a slightly more simplified look. Given that this ship is designed to go with the 5 POA 3 ¾ inch figures, these changes are reasonable, and make it so the ship fits in with the rest of those offerings.

PoeXwing3

The ship has a non-removable BB-8 built in, much like the R2-D2s built into the X-Wing toys of old. I was happy to see he got a fully detailed sculpt, which matches up pretty well to the single release figure. The construction of the X-Wing isn’t without its issues, though. The most glaring ones are pretty much all related to the parts that were separate in the box. The first, and by far the most minor issue for me, is the softer rubber material used for the nose. This is clearly a safety standards thing, so I can understand why it was done. It really doesn’t look that bad, and my only real concern is how it will hold up over time. The big issue is the level of warping present on the wing cannons. They come like that out of the box, and look a bit on the silly side. Fortunately, there are a few fixes that can be applied, or, if you don’t want to fix them yourself, you can just shoot Hasbro an email and they’ll send you a replacement set for free. Other than that, all the other nits are fairly minor. There are a few exposed screws, but they’re all in fairly out of the way places. The general construction of this ship really isn’t horrible. Paint is something of a key piece on this one, since it’s the color scheme that denotes the fighter as Poe’s. The grey/orange scheme is pretty striking here, and it works nicely with the mold. The actual paint is fairly basic, with just solid color work. There are some areas with some slightly uneven coverage, but the overall look is quite good. BB-8’s head gets some nice work, but his body is left completely unpainted, which is just a tad jarring. The X-Wing has two action features. The main one is the wing feature. When BB-8 is pressed, the wings pop open into the signature X formation. When the button behind him is pushed, they go back to their normal positioning. The mechanism isn’t particularly strong, so the wings won’t stay open if you set the ship down, which is a tiny bit of a letdown (and it also made taking pictures rather hard). The other feature is a more simple missile launching one. Pressing a button on the underside of the fighter launches the included missile. It’s actually surprisingly powerful, so try not to shoot your eye out.

THE ME HALF OF THE EQUATION

Poe’s X-Wing Fighter was another Christmas gift from my incredibly supportive parents. It’s not a perfect item. I can make a list of the issues, I can say it’s a step back after the more advanced X-Wings we’ve gotten in the past. It’s under-sized, and the cannons are warped, and maybe the paint could be better. But when I opened this thing up and put it together? Pure joy. I think it might just be my favorite item I received for Christmas. Seriously, I was so excited that I may or may not have run through the house with it making flying sounds…

PoeXwing4

#0806: IG-88

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

IG-88

STAR WARS: THE BLACK SERIES

IG88a

It’s day 5 of the Post-Christmas gift reviews, and today I’ll be looking at the first example of one of the themes to my gifts this year: Star Wars.  I can’t possibly imagine why that was the case.  It’s not like there was a new movie or something.  Of course, today’s figure isn’t from The Force Awakens, he’s actually from the original trilogy.

Empire Strikes Back is a lot of people’s favorite Star Wars movie (Not mine, but that’s a whole other thing).  There are a number of reasons for that, but one of the most prevalent, especially from a toy-buying perspective, is the bounty hunters.  Moving past the disproportionately popular Boba Fett, the film introduced five rather unique bounty hunters, all of whom do little more than fill the background of a scene on a Star Destroyer.  Still, those unique looks certainly made them all pretty memorable, and it also made them pretty good choices for action figures.  One of my personal favorites has always been IG-88, who is the focus of today’s review.

THE FIGURE ITSELF

IG88bIG-88 is a part of Series 9 of Hasbro’s Star Wars: The Black Series line, released alongside Leia as Boushh and Clone Commander Cody.  He was one of the last figures to hit before the switch-over to Force Awakens-branded product.  IG-88 is numbered 15, which places him right before Leia numerically.  The figure stands just shy of 7 inches tall and has 21 points of articulation, which is pretty darn impressive for a character of his build.  There are certainly some parts that might benefit from improved movement (seriously, those cut-joint hips are killing me), but he’s overall a lot more mobile than I would have expected.  IG-88’s sculpt is seriously top notch.  It’s pretty much a pitch-perfect recreation of the design from Empire, right down to all the little tacked on bits.  Perhaps the only inaccuracy is the head, which is generally a bit sharper, and has a few more molded lines than the real thing.  However, the end result looks a bit better, so I can’t really complain on that one.  His elbows both have a rubber covering to mask the joints.  It looks cool, and it retains mobility, but I do have to wonder how long those pieces will last.  His bandolier is a separate piece, affixed via a small peg on the figure’s shoulder.  It sits nicely, ans allows for stowage of one of his guns and his bladed item.  The paintwork on this figure is probably the best I’ve seen on a Black Series figure in some time. To be fair, this does seem like a hard paintjob to screw up, but this is Hasbro we’re talking about here.   He actually goes beyond the simple gun metal grey we’ve seen on prior IG-88s and some brasses and browns, to give him that nice old and worn look.  IG-88 is packed with two blaster rifles, one long and one short, which can be attached to his hands through use of the small pegs on his forearms.  He also has a blade/axe thing, which can be placed in its spot on the bandolier.  All of the extras are very nicely sculpted and wonderful additions to the figure.

THE ME HALF OF THE EQUATION

While I was fortunate enough to stumble across his series-mate Leia at an out of the way Walgreens, I had no such luck finding IG-88.  Fortunately, my parents seemed to fair a little better, as he was amongst the gifts I received on Christmas morning.  He’s a pretty stellar figure, from start to finish.  The sculpt and the paint really work together on this guy, and he ends up being one of the best figures to date that The Black Series has spawned.

IG88c