Tag Archives: Star Wars

#0350: Darth Vader

Posted by Ethan Wilson in Reviews and tagged with , , , ,

DARTH VADER

STAR WARS: THE BLACK SERIES

Okay, so right off the bat, I’m sure my loyal readers are a little confused by today’s Figure in Question. I’m at another 50 mark with no High End review? Well, for the first 300 reviews, getting through another 50 was noteworthy. Past 300, it’s far too frequent. So, from here on out I’ll be saving those reviews for the every hundred. Okay, on to the actual review stuff.

Since the beginning of Star Wars: The Black Series, there’s been one key player obviously missing: Darth Vader. His absence from the line was a bit shocking to see, given he’s one of the signature characters of the series and he’s generally been Hasbro’s bread and butter. The prevailing rumor was that Hasbro was holding off on Vader until they had gotten a few series in, so they could get him right. Well, here we are, five series in, and we’ve finally gotten a Vader figure. So, did they get him right? The results are…mixed.

THE FIGURE ITSELF

Darth Vader was released in the fifth series of Star Wars: The Black Series. Just like Luke, Vader’s number shows that Hasbro has reset the numbering on the figures. He’s figure #02, a number previously held by the X-Wing Pilot Luke from the first series. If I’m correct in my thinking, this is meant to be Vader from Return of the Jedi, though it’s possible he’s an amalgamation of the Empire and Jedi looks. That’s what Sideshow did with their Vader, so there’s precedent. Regardless, the differences are minor, so only a die-hard fan will really notice. The figure is about 6 ½ inches in height and features 26 points of articulation. The figure features a mix of sculpted pieces and cloth goods to convey his design. Let’s look at the sculpt first. Overall, the sculpted work on this figure is pretty good. The proportions of the body look right for the character, and there’s some very nice stitched ribbing on his arms, legs and torso. There have been some complaints about the pose of the left hand, but I think it looks really great, and it adds a bit more uniqueness to Vader. The figure has been given a two-piece, removable helmet, like in the movie. The underlying head sculpt is a pretty good approximation of Sebastian Shaw. The eyebrows aren’t painted, so it’s technically Special Edition-ed , but they’re sculpted, so you could paint them if you so desire. The helmet is really the sculpt’s downfall. It’s not bad, per say, but it’s just off enough to fall short of what Vader should look like. To their credit, the helmet pieces snap together really well, and the assembled helmet has no trouble staying on the head. If you don’t want to take the helmet off, you never have to. However, the shape of the assembled helmet is just off enough to throw the whole figure off-kilter. The real issue is that the helmet is just too short and squat for Vader’s helmet in the movie. It’s minor, but when you’re dealing with a design this distinctive you can’t afford to be even the slightest bit off. It’s kinda like messing up Mickey Mouse’s ears, or Superman’s shorts (okay, bad example). If the helmet is the downfall of the sculpt, the cloth goods are the downfall of the figure as a whole. Cloth goods on smaller scale figures are something of a polarizing issue. I don’t mind them when they’re done right, but that’s not here. The major issue here is that the pieces have just been cut WAY too big. The skirt hangs too far in front of his legs, going past the sculpted slot by a good ¼ inch on either side. It also is far too long, leading to it dragging at his feet. The cape isn’t quite as bad. It’s still too long, and it sits too low on his shoulders, but it does have a nice chain clasp, and it looks okay with some good futzing. The paint on Vader is nothing too exciting. It’s clean. Some people dislike the red eyes, but they aren’t that noticeable in person. Vader’s sole accessory is his red lightsaber. It’s well sculpted, and it fits nicely in his right hand, but the blade in mine has trouble staying attached.

THE ME HALF OF THE EQUATION

Vader was acquired from the same Walgreens where I got Luke, which I was taken to while visiting my Super Awesome Girlfriend (love you!). Vader is a confusing figure. Honestly, he’s not that bad. Were this quality applied to any other character from the franchise, it’d be fine. But this is Vader. This is the guy you have to get right! If he’s not right, it throws the whole collection off. I understand that Hasbro wanted to bring their A-game to this figure, which is why he was pushed to a later series. But, the issue that seems to be cropping up here is that the quality of the line is falling, rather than rising, with each subsequent series. Vader and Luke aren’t bad figures at all, and I don’t regret getting them. I’m incredibly happy have both of them. Still, they could have been better, and that’s a shame.

Well, I said I wasn’t doing a Deluxe review, but I’ve actually written a regular review that’s about the same length. How about that?

#0349: Luke Skywalker

Posted by Ethan Wilson in Reviews and tagged with , , , ,

LUKE SKYWALKER

STAR WARS: THE BLACK SERIES

I’d be lying if I said my interest in Hasbro’s Star Wars: The Black Series hadn’t waned a bit. Following the first and second series, I was incredibly excited for the line and eager to see what more the line would offer. However, with the long waiting periods between each series, as well as some cuts in the accessories included with each figure, plus a lack of interest in any of the figures in the fourth series on my part, I’ve become more… moderate in my interest. Still, the more recent Speeder Bike did reinvigorate my interest a bit. In an odd turn of events, Walgreens has begun carrying their own action figure exclusives, and in addition to one exclusive figure, they are also getting the newest series of The Black Series before other stores. Today, I’ll be looking at the most recent figure of Luke Skywalker.

THE FIGURE ITSELF

Luke was released in the fifth series of Star Wars: The Black Series. It looks as though Hasbro has reset the numbering on the figures, as Luke is listed as #03, which was previously the number given to the Sandtrooper from series one. He’s based on Luke’s Jedi master look from Return of the Jedi, specifically from the second half of the film, after he’s lost the vest. It’s an important look for Luke, so we were bound to get him sooner or later. The figure is a little shy of 6 inches in height and he features 27 points of articulation. I’m glad to see they’ve gone back to the usual mix of one forward/back and one left/right joint for his wrists, rather than the two forward back we saw on Bespin Luke. The figure is has no boot cuts, which is a bit limiting, but not terrible. The figure’s sculpt is all-new, and it’s not bad. At first glance, it seems he’s too skinny, but a quick look at some pictures of Hamill from the film show it’s accurate. There’s a lot of great detail work in his uniform, with lots of folds and wrinkles for texture, which is great. The likeness on this figure is better than that of Bespin Luke, but I can’t help but feel the actually quality of the sculpt isn’t quite as good. It feels like the details aren’t as sharp on this one. But, it’s hard to tell because of: The Paint! Yeah, the paint on this figure is definitely a step down from previous releases. The colors are a lot flatter, the hair doesn’t quite stay in the sculpted lines, and then there are the pupils. Apparently, this figure is meant to depict Luke shortly after a trip to the eye doctor, because those pupils are seriously dilated. With some slight improvements to the paint, the sculpt would probably be shown off much better. Luke includes his green lightsaber from Jedi and an alternate front to his torso with the flap folded down. The lightsaber is nice, but the package has left it slightly warped. The alternate flap is a nice touch, and it allows for some variance in the display options.

THE ME HALF OF THE EQUATION

So, as you probably figured out from the intro, I got this Luke figure from Walgreens. There are actually no Walgreens nearby, so I figured I’d just wait till the proper release. However, I was visiting my Super Awesome Girlfriend for the weekend, and I noticed a Walgreens not far from her campus. Living up to her name, she insisted we go there. So, I found Luke and Vader there, which was definitely cool. The figure isn’t flawless, and I’m beginning to grow weary of the endless Luke variants, but he’s not bad overall. It’s an important look for the character, and it’s a decent enough figure. If Hasbro could work on improving the paint work and perhaps start giving the figures a few more accessories, he’d be even better!

#0335: Pit Droids

Posted by Ethan Wilson in Reviews and tagged with , , , ,

PIT DROIDS

STAR WARS 30th ANNIVERSARY COLLECTION

PitDroids1

So, umm… run down on the Star Wars stuff I mentioned before. Prequels bad. Originals good. Toys for both. There, up to speed?

Amazingly enough, I actually don’t hate The Phantom Menace as much as the other two. It’s still not great, but I can find things to enjoy about it. The lack of a certain Hayden Christiansen really helps. Anyway, the wonders of CGI meant that we got to see some pretty decent designs that wouldn’t have otherwise been brought to life. One such design was that of the Pit Droids, the little droids that worked in Watto’s shop and on the Pod Race track (incidentally, two of my least favorite places/sequences in the movie, but not at the fault of the Pit Droids). Today, I’ll be looking at a pair of those droids.

THE FIGURES THEMSELVES

PitDriodsWilsonThe Pit Droids were released in the Fan’s Choice assortment of the 2007 series of the Star Wars 30th Anniversary Collection. The figures are about 2 ½ inches in height and the each feature 5 points of articulation. Both Pit Droids in the set make use of the same sculpt, so I’ll just be examining it once. They are a total re-use of the Bonus Pit Droids that were released in place of the comm-tech cards included with Phantom Menace figures in countries that weren’t carrying the comm-tech reader. The figures never saw a domestic release, so it was nice for Hasbro to get them out to those that missed out. It’s a pretty decent sculpt, and seems to accurately translate the Droid design to the toy form. They seem to be a little on the large side based on the scale in the movie, but it isn’t too far off. The Pit Droids were available in three different color schemes. I got the orange/white scheme, which is the one I preferred and coincidentally the one I found. The paintwork is pretty decent. It’s cleanly applied and there aren’t any noticeable instances of bleed over or slop. Like the different color schemes, there were also different accessories offered with the figures. This particular set included a silver power converter, as well as metal coin with a Phantom Menace related design on it, denoting these figures as Fan’s Choice.

THE ME HALF OF THE EQUATION

I like the Pit Droids, but given their absence from The Phantom Menace toyline, by the time they were actually released I was mostly out of collecting prequel figures. My ability to resist figures severely lowers when the figures are on sale, so when my local comicbook store, Cosmic Comix, marked all of their Star Wars figures down to $3.99, I was kinda roped in. It’s a nice little set, and if you like the Pit Droids, you’ll like these.

PitDroids2

#0334: Kashyyyk Trooper

Posted by Ethan Wilson in Reviews and tagged with , , , ,

KASHYYYK TROOPER

STAR WARS 30th ANNIVERSARY

KashyykTrooper1

The Star Wars prequels are kinda bad. They make me sad, and that’s just not right. Every time I watch them, I like them even less than before. They are the perfect antithesis of the original trilogy in that respect. Still, there were a few interesting ideas, and above all, there were some genuinely good designs. Yesterday, I took a look at Clone Commander Gree, one of my favorite designs from the prequels. Today, I’ll be taking a look at the Kashyyyk Trooper, one of the clones under his command.

THE FIGURE ITSELF

KashyykTrooperWilsonLike Gree, the Kashyyyk Trooper was realesed in the 2008 series of the Star Wars 30th Anniversary Collection. The figure is 3 ¾ inches in height and features 23 points of articulation. The Kashyyyk Trooper is based on one of the handful of trooper designs seen amongst the Kashyyyk forces in Revenge of the Sith. The design takes a lot of its cues from the Scout Trooper design, but the figure actually features a mostly new sculpt. The only re-used piece is the figure’s head, which previously was used on a Scout Trooper, but even that has a new faceplate. The rest of the sculpt is new, and it’s all pretty well done. The proportions are pretty good, though the hands do seem a little oversized. There are minor differences between the Scout Trooper and the Kashyyyk Trooper, and it’s really nice to see Hasbro go the extra mile to include these differences instead of just resorting to a basic repaint. The flip up face plate is pretty cool looking. It flips down easily, and stays in place the right way and it doesn’t look to bulky. The underlying face is fairly generic, but that’s alright for a clone, I suppose. The paint work on the Trooper is pretty good. Not as impressive as Gree’s, but pretty decently detailed. There’s no real issues with slop or bleed over, so that’s good. The figure includes a large blaster rifle and a display stand with the figure’s name and the title of the movie on it.

KashyykTrooper2 KashyykTrooper3

THE ME HALF OF THE EQUATION

This is a figure that I didn’t really jump on when it was first released. At the time, I was kind of getting out of Star Wars figures, and I certainly wasn’t going to be getting prequel figures. However, when my local comicbook store, Cosmic Comix, marked all of their Star Wars figures down to $3.99, the price was right. It’s a pretty cool figure, with a pretty cool design. I love the Scout Trooper, so you can’t really go wrong with throwing some green in there.

#0333: Commander Gree

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

COMMANDER GREE

STAR WARS 30th ANNIVERSARY COLLECTIONCommanderGree1

Generally speaking, I don’t like the Star Wars prequels. I remember enjoying them overall when they were released, but as time has gone on, I like them less and less. That being said, there are a few things I did like from those movies. One of the biggest things was the Clone Troopers, who were just all kinds of cool. In Revenge of the Sith, we were introduced to several named clones who served as commanders of certain forces, and featured their own unique looks. My personal favorite was always Commander Gree, the clone in charge of the forces on Kashyyyk.

THE FIGURE ITSELF

CommanderGreeWilsonGree was released in the 2008 series of the Star Wars 30th Anniversary Collection. The figure stands 3 ¾ inches tall and features 26 points of articulation. Gree is based on the character’s appearance in Revenge of the Sith. He makes use of the pieces from several of the previous Clone Troopers, with the addition of a new torso featuring Gree’s “suspenders.” All of the pieces are pretty accurate to the movie, which is pretty cool. The figure features a removable helmet, which is quite nicely scaled. Surprisingly enough, the underlying head isn’t undersized to ensure this, and it even has more than a passing resemblance to actor Temuera Morrison, which is much better than the last two clones I reviewed. The paintwork is the most important part of any Commander Gree figure, and the paint here is spectacularly done. There’s a tone of texture and detail on pretty much every piece of the figure and he features no noticeable slop or bleed over. Gree includes a short blaster rifle, a pair of binoculars, a backpack with an antenna, and a display stand featuring his name and the movie he appeared in.

CommanderGree2 CommanderGree3

THE ME HALF OF THE EQUATION

Gree is a figure I passed on a few times when he was released. I already had the earlier version from the Revenge of the Sith line, and I figured that was probably good enough. Recently, my local comicbook store, Cosmic Comix, had a sale and marked all their Star Wars figures down to $3.99. For that price, I was willing to go for it. I’m glad I did because this version of Gree is a definite step up from the previous one.

#0322: Biker Scout

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BIKER SCOUT

STAR WARS: THE BLACK SERIES

BikerScoutSmall1

To make matters of confusion worse in regards to the two separate scales for Hasbro’s Star Wars: The Black Series, I’ve opted to go through with reviewing the lone figure that I own in both scales. The key difference here is that this time around, it’s an Original Trilogy character. But, wait, wasn’t I sticking to the larger scale for OT characters? Quiet you! Today’s figure is the Star Wars equivalent of George of the Jungle, the Biker Scout. Watch out for that tree!

THE FIGURE ITSELF

BikerScoutSmallWilsonThe Biker Scout was released as figure #07 in the first assortment of the 3 ¾ inch scale Star Wars: The Black Series. Like the Clone Sergeant and the Clone Pilot before him, this isn’t any particular character, but rather one of the basic Scout Troopers, seen in Return of the Jedi. The Biker Scout is roughly 3 ¾ inches tall and has 25 points of articulation. At first glance, I thought this figure might just be a straight rerelease of the Saga Legends version of this design, but it looks like Hasbro’s given this one a pretty thorough re-work. The articulation isn’t quite there just yet, but Hasbro’s definitely making some serious strides. The Biker Scout’s sculpt appears to be all-new [EDIT: A little bit of looking around shows that this figure is the same sculpt as the Biker Scout included with the 2012 Toys R Us exclusive Speeder Bike. Since I don’t have that set, this sculpt is still new to me]. There are quite a few similarities to previous versions, but that’s to be expected. On its own, it’s not a bad sculpt, and does a pretty decent job capturing the various elements of the design. The only real negative of the figure is the helmet. The Goggles seem to be too small in relation to the helmet, and the helmet itself seems too small in relation to the rest of the body, which makes the figure look like a bit of a pin-head. The paint work on the Biker Scout is mostly straight forward, but there are a few issues. There are a few areas with some small scrapes and smudges, as well as a decent bit of bleed over on the elbow and knee pads. Also, the shoulder and ankle joints have been molded in black plastic, which makes them stand out unnecessarily. Had they been molded in white plastic, this could have been avoided. Lastly, the pouches on his mid-section, while cleanly painted, have been painted a solid tan, which seems like just a bit too much of a contrast from the surrounding areas. The Biker Scout is armed with a small blaster pistol.

THE ME HALF OF THE EQUATION

The Biker Scout was gotten at the same time as the Clone Pilot and the Clone Sergeant. As I mentioned in my review of his larger scaled counterpart, the Biker Scout is my favorite Trooper design from Star Wars. That being said, I think this figure would have been better served had I gotten it before the 6-inch version. It’s not a bad figure on its own, but it pales in comparison to the truly impressive Biker Scout from the larger line. The point is, this is a good figure. It’s probably the best version of the Biker Scout in the 3 ¾ inch scale. If you prefer that scale, than this is the figure for you!

BikerScoutSmall2

#0321: Clone Pilot

Posted by Ethan Wilson in Reviews and tagged with , , ,

CLONE PILOT

STAR WARS: THE BLACK SERIES

ClonePilot1

Sure, having two different scales of Star Wars: The Black Series operating under the same name is a bit confusing, but you have to admit they both have their merits. While I still prefer the larger scale figures for the Original Trilogy characters, I don’t mind picking up the few Prequel figures here and there at the smaller scale, and by extension, the smaller price point. In particular, I’m a decent fan of the Clone Troopers, which has led me to pick up a few of the line’s offerings on that front. Today, I’ll be looking at the Clone Pilot.

THE FIGURE ITSELF

ClonePilotWilsonThe Clone Pilot is figure #08 in the first assortment of 3 ¾ inch-scale Star Wars: The Black Series. The figure is based on the “phase I” version of the pilot, initially seen in Attack of the Clones. The Clone Pilot is 3 ¾ inches in height and features 26 points of articulation. From a sculpt standpoint, the Clone Pilot is the exact same figure as the Clone Sergeant in all areas but the helmet. Aside from the un-helmeted head being a bit on the small side, it’s a really well sculpted figure and it captures the basic clone look quite nicely. Hasbro obviously wants to get their mileage out of this new clone mold and I can’t blame them. The figure’s new helmet is in keeping with the quality of the rest of the figure. It’s got nice, crisp detail lines, and all the proportions and such look right on the mark. The paintwork on the Clone Pilot isn’t quite as nice as that on the Sergeant. For starters, there’s no accent work on the body, which is less interesting. It’s true to the design, but it’s a bit bland. The figure also has some odd red staining on his left shoulder and right knee, which is distracting. The skin tone on the face is also a lot paler and makes him look lifeless. That being said, the rest of the paintwork is nice and clean, and this figure doesn’t have the same eye issues as the Sergeant. The Clone Pilot’s only accessory is a small blaster rifle, which is a bit disappointing after seeing the two rifles with the Sergeant.

THE ME HALF OF THE EQUATION

I got the Clone Pilot at the same time I purchased the Clone Sergeant. It’s not as good a figure as the Sergeant, but it’s still a pretty great figure in its own right. I’m glad to see Hasbro making strides to improve the smaller scale Star Wars line. I’m sure we’ll be seeing more clones appearing on the new base body as well. All in all, not a bad figure!

ClonePilot2

#0320: Clone Sergeant

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CLONE SERGEANT

STAR WARS: THE BLACK SERIES

CloneSergeant1

So, remember how Star Wars: The Black Series was supposed to be a deluxe 6-inch line of figures, sort of as Hasbro’s big move to please the fans? Yeah, well apparently, that was just a little too un-Hasbro of them. It was a move that wasn’t confusing at all, and that didn’t work. So, to make up for this, they decided to simultaneously release a 3 ¾ inch line under the exact same name, to the detriment of fans and ill-informed retail workers everywhere. On the plus side, the line does promise a more diverse line-up than the larger scale figures, as well as some improvements over the previous 3 ¾ inch figures. Today, I’ll be taking a look at the line’s version of the Clone Sergeant, who interestingly enough was just announced for the 6-inch line as well. Prepare for the confusion everybody!

THE FIGURE ITSELF

CloneSergeantWilsonThe Clone Sergeant is part of the first assortment of the 3 ¾ inch scale Star Wars: The Black Series. The figure is just a basic Clone Sergeant, not any character in particular, and the figure is in the clone’s original “Phase I” armor. If I recall correctly, the Sergeant rank is not seen in Attack of Clones, so this is officially a Clone wars figure. The Sergeant is about 3 ¾ inches in height and features 26 points of articulation. While the articulation is still a little bit stilted in a few areas, the level present in these new figures is incredibly impressive. Hasbro’s done quite a few Clone Troopers over the years, with lots of shared parts between them, but I think that the newly engineered articulation means this figure sports an all-new sculpt. The details of the sculpt are nice and sharp, and the figure’s proportions look pretty good. The helmet is removable. The helmet is properly scaled, but in order to make it fit properly, the head had to be a tad under-scaled. The underlying head also bears little resemblance to actor Temuera Morrison, which is too bad. However, I can’t see many people leaving the helmet off, so it’s not much of a loss. The paint work is basic, but also key in differentiating the Sergeant from the other Clones. The Sergeant has an olive green accent on his armor, which looks really great, and definitely makes the figure stand out. The paintwork is all nice and cleanly applied. The unmasked head has some slightly odd eyes, but they aren’t horrible for the scale. The Sergeant includes both long and short blaster rifles, which allows you to add just a touch of customization.

THE ME HALF OF THE EQUATION

The Clone Sergeant was purchased at a Walmart, nearby my girlfriend’s college campus. I don’t usually shop at Walmart, but she needed to get a few things and I went with her. Me being me, I took a look in the action figure aisle, where I found this guy and a few other SW:TBS figures. I hadn’t initially planned on getting any of them, but Super Awesome Girlfriend is a terrible influence on me (okay, not really. She’s just incredibly supportive!) So, I ended up getting a few figures from the line. I really like the Sergeant, mostly due to the green accents, which are just really cool!

CloneSergeant2

#0285: Biker Scout & Speeder Bike

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BIKER SCOUT & SPEEDER BIKE

STAR WARS: THE BLACK SERIES

BikerScout1

We interrupt the regularly scheduled “Birthday Stuff” reviews for a quick little venture into a galaxy far, far away. You might notice that there are two reviews today. Yeah, they’re both by me, I just screwed up the scheduling. See, I originally intended to publish the Green Ranger review today, just like I did, but I decided I wanted to take a break from the birthday things to review something I was very excited about. Sadly, the day got away from me, so I didn’t get a chance to stop the Green Ranger from auto posting. My bad! Anyway, that means there will be two reviews today, just cuz.

The subject of this review comes from Hasbro’s Star Wars: The Black Series, their very popular 6-inch scaled line of Star Wars figures. So far, they’ve put out three series of figures with another three planned. In addition to that, they’ve also started offering a line of Deluxe figures and vehicles, starting with Jabba the Hutt and today’s focus, the Biker Scout and Speeder bike!

THE FIGURE ITSELF

BikerScout2The Biker Scout stands about 6 inches tall and features 31 points of articulation. He’s based on the basic scout design from the final battle on the forest moon of Endor in Return of the Jedi. The Biker Scout features an all new sculpt. No re-use from any of the previous figures, and not even any upscaling of pieces from the 3 ¾ inch Biker Scouts. The sculpt is probably the most accurate take on the design over the years. All of the proportions look just right, especially on the helmet, which is a really key area of the design. Do be mindful if you pick one up in person: the helmet is made of softer plastic and it gets pressed up against the packaging in such a way that might warp it a bit. The arms might be just a tad too long, mostly due to the elbow joints, and the hands might be slightly too small, but it doesn’t look too bad with the right pose. The uniform features some pretty great texture work to differentiate the armor from the cloth parts of the costume, which gives the figure a nice bit of dimension. The paint work on the Biker Scout is pretty good, by Hasbro standards at least. The basic paint work is pretty clean, though the visor is a bit fuzzy on the edges. He has a wash over a few of the white areas. It brings out some of the details well, but it might be better if it were just a little bit more subtle. The Scout includes a blaster pistol, which is nice, but mine broke putting it in his hand, so be careful.

BikerScoutWilson BikerScout3

THE VEHICLE ITSELF

BikerScout4The Speeder Bike is effectively the title half of this set, even if the Biker Scout may have gotten more of the tooling put towards him. The bike is about 10 inches long, and about 2 inches tall at its tallest, with articulated back flaps and a rotating gun on the underside. The sculpt is really quite intricate, with lots of really cool details hidden in the various nooks of the sculpt. It looks to be really accurate to the movie, which is cool, and I’m glad to see a speeder bike that is mucked up by an exploding feature. The paint work is pretty good overall, but it is a bit varied. The metal under-workings have some really nice dry-brushed silver details, which is pretty cool, but the silver details on the main body are a bit more solid, which makes them look a bit too placed. Otherwise, the paint is nice, with no slop or bleed over. The Speeder Bike includes a clear(ish) stand that plugs in via ball joint, allowing the bike to be posed in mid-flight.

THE ME HALF OF THE EQUATION

I found this set at my local Target yesterday. I actually found it completely by accident, since I wasn’t expecting it to be released just yet. I was there looking for a couple of other things, and came across this bad boy, which was very exciting! The Biker Scout is my favorite Trooper design from Star Wars, so I’ve been patiently awaiting his release since the beginning of the Black Series. I am thrilled to finally have this set, and it’s hands down my favorite item from the line!

BikerScout7

#0211: Stormtroopers

Posted by Ethan Wilson in Reviews and tagged with , , ,

STORMTROOPERS

STAR WARS: THE BLACK SERIES

Stormtroopers

THE FIGURE IN QUESTION

EPISODE 211

It was a dark time for the FIGURE IN QUESTION. Negotiations have broken down following the disappointment of the Slave Leia figure. The rebellion has recovered from this blow with the release of the Bespin Luke Skywalker figure. The rebels quietly celebrate their victory. Little do they know that the evil Galactic Empire has plans for an awesome figure of their own. If only the collectors could find that figure….

Yep, Star Wars: The Black Series is a pretty cool line, but I can’t help but feel that it’s a bit short on representing the Empire. Sure, we got a pretty cool Sandtrooper back in series one, but that’s just a Sandtrooper. It can’t even find the droids it’s looking for! But then, Hasbro announced the Stormtrooper! Everyone loves the Stormtroopers! And you can buy a bunch, meaning that your Empire’s ranks could quickly grow, right? Yeah, in theory anyway. But then Hasbro decided to pack him one per case. So…that didn’t go so well. After a few months I finally tracked a couple, but man…

THE FIGURE ITSELF

The Stormtrooper was released in the third series of Star Wars: The Black Series. His number is #09. The Stormtrooper is pretty much the same in every movie (I know there are some differences that a die-hard fan could point out, but I don’t know them.), so they’ve gone with the one look.  The figure is a little over 6 inches tall and has 29 points of articulation. In a first for the line, the Stormtrooper’s sculpt is mostly re-use. The figure shares everything but the belt and left shin with series one’s Sandtrooper. The head might also be a new sculpt, but I can’t tell. The difference might just be paint releated. Anyway, the sculpt was nice to begin with, so it works really nicely here. The big difference between this figure and the Sandtrooper is the paint. The Stormtrooper is much cleaner, which makes the figures sculpt look a bit bolder. The figure is mostly molded in the appropriate white, but he has some black detailing, which is mostly clean. I did notice a few areas of slop, but they seem to vary from figure to figure, so check them if you have the opportunity. The Stormtrooper includes two accessories: his basic rifle, which is reused from both the Sandtrooper and Han Solo, as well as a larger rifle, which is speculated to see a re-use with robot assassin IG-88. Once again, this is a bit of a step down from earlier series, but I can’t really think of anything else to give the troopers.

THE ME HALF OF THE EQUATION

After a while of searching, I finally caught the Stormtrooper while it was in stock on Amazon. I was able to get two of them, because you can’t just have one Stormtrooper, that would be wrong. I had enjoyed the Sandtrooper quite a bit, and was eager to see how the sculpt would look when used for the main trooper. Aside from the issues finding the figures, they really didn’t disappoint!

StormTrooperswbubble