Tag Archives: Star Wars

#3678: Luke Skywalker – Snowspeeder Prototype Edition

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LUKE SKYWALKER — SNOWSPEEDER PROTOTYPE EDITION

STAR WARS: RETRO COLLECTION (HASBRO)

“This Luke Skywalker is inspired by the colorful prototypes that enable the development team to look past the deco and focus on the sculpt, analyze mold alignment, and adjust for quality.”

During the action figure production process, there are a number of prototyping stages.  Once the sculpt is completed and has been tooled into a steel mold for the purposes of mass-production, the molds have to be tested to make sure they work properly.  Since you don’t want to use the plastic you’ve paid to use on final production for something that may or may not work and which will effectively be junked once the mold has been confirmed as properly working, factories will run these tests with whatever plastic they have left over from other jobs, often resulting in colorful results.  Over the years, some of the test run prototypes have surfaced, and they’re a fun little quirk of the process.  And, because it’s been determined that there’s money to be made in that particular quirk, Hasbro has jumped on mass-producing them.  Thus far, we’ve gotten six of them as part of the Star Wars: Retro Collection, and I’ve finally gotten one!  Huzzah!

THE FIGURE ITSELF

Luke Skywalker (Snowspeeder) Prototype Edition is a Target-exclusive offering for the Retro Collection, as all of the Prototype Editions have been thus far.  He arrived in January of 2023, and is the fifth of the six Prototype Edition releases.  The figure stands 3 3/4 inches tall and he has 5 points of articulation.  Obviously, all of the Prototype Edition figures are re-using a mold that Hasbro’s already got in production for the main Retro Collection line, but in Luke’s case, he’s notable for being a new, actual in-house Hasbro mold, rather than a recreation of an old Kenner one.  As there were no proper Snowspeeder pilots in the vintage line, Hasbro did a sizeable rework on the X-Wing Pilot Luke from Kenner’s vintage line, bulking him a bit to add the extra padding, as well as making sure he’s got the gloves, and the modified boots.  He also brings the helmet’s visor down over his eyes, as it was more frequently seen in the movie.  For color work, these figures have no paint, instead relying on a variety of different colors for each of the body parts.  There are actually six different variations of color layouts available, with the blue, red, green, yellow, purple, and orange each being applied to a different body part depending on the variant.  This one has blue for the head, red on the torso, orange on the right arm, green on the left arm, yellow on the right leg, and purple on the left leg.  He’s packed with his lightsaber (which is molded in the same color as the head, so it’s blue here) and his grapple.

THE ME HALF OF THE EQUATION

I’ve been low-key wanting one of these since Hasbro started doing them, but not enough to really go hunting for any of them.  Likewise, I kind of wanted this mold, but also not enough to track down its original release with the board game.  This guy landed in front of me, and that made the whole thing a lot easier.  He’s very definitely a novelty, and I don’t see myself going in for any more of them (well, maybe an IG-88 if they did him), but I do like having at least one of them.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3673: Mynock Hunt

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

CHEWBACCA, PRINCESS LEIA ORGANA, & HAN SOLO

STAR WARS: POWER OF THE FORCE II (KENNER)

“Fleeing the fierce Imperial assault on the frozen planet Hoth, the Millennium Falcon and the Rebel crew fly into the midst of a waiting Imperial war fleet. Unable to engage the Falcon’s malfunctioning hyperdrive system, Han Solo steers recklessly into an asteroid field. Solo maneuvers the Corellian freighter through the deadly storm, missing large rocks by mere inches before locating sanctuary in the cave of a huge asteroid. Inside the cave it become apparent that the Falcon is in danger of being ravaged by mynocks. Large, winged parasites with an appetite for the mineral and energy-rich bulls of starships, mynocks can cause critical damage to star-freighting vessels. Forced to hunt the creatures before irreparable harm is caused to the Millennium Falcon, Chewbacca, Princess leia, and Han Solo don breathing gear and venture outside. But the mynocks become a secondary concern once the Rebel crew discovers that the cave they’re parked in is not a cave at all, but something large and very alive.”

To date here on the site, I’ve looked at 9 of the 10 Power of the Force Cinema Scenes sets.  That feels pretty wrong, right?  Yeah, I definitely need to fix that.  So, you know what?  I’m gonna do that now!  Because that’s the kind of commitment I’ve got to seeing things through!  And I’m also gonna stop shouting now because it seems like a bit much for Power of the Force!  …so, yay?  Okay, well, let’s just jump into the review, I suppose.

THE FIGURES THEMSELVES

The “Mynock Hunt” Cinema Scenes set was added to the Power of the Force line in 1998, as a standard release offering.  Interestingly, it’s the only set in the sub-line to be based on Empire.  The set included a stand for the three figures, as well as a Mynock.  Unfortunately, as with pretty much every Mynock ever, there’s no base or anything for it, so it’s just kind of…there?  Ah well.

CHEWBACCA

Despite his lack of drastic changes in the films, Chewbacca wound up in two Cinema Scenes, putting him on equal footing with Han, and second only to Luke. That’s honestly pretty crazy. The figure stands about 4 inches tall and he has 6-ish points of articulation. 6-ish because the neck is once again kind of pointless in its implementation. Structurally, Chewy is using the second iteration of the standard Chewy sculpt from the line, placing him in line with the Boushh Prisoner and Hoth Chewbacca figures, and retroactively making the first Chewy sculpt more specifically the A New Hope version. It’s a far less bulked up take on the character to be sure. I was never 100% sold on the head for this version, but otherwise it’s not bad. He’s a bit more pre-posed for this specific release, making him, amongst other things, the first Chewbacca that can properly hold his bowcaster two handed. His paint work isn’t bad; there’s some variance in the fur colors, which works pretty nicely. Chewy is packed with his bowcaster, as well as removable breathing mask.

PRINCESS LEIA ORGANA

This was Leia’s only time gracing the Cinema Scenes sub-line, and was also notable for being the easiest way to get her Hoth attire for a good while, thanks to the single card being locked behind the fan club exclusive set-up. She stands about 3 1/2 inches tall and has 6 points of articulation. Her sculpt was new, though admittedly pretty similar to the single carded version. Like the other Cinema Scenes figures, she’s a little more pre-posed, with her arms ever so slightly raised. It’s minor stuff. Honestly, it’s a decent sculpt, so I’ve got no complaints. The paint’s a little overboard, I feel. She’s in all white, but there’s this sort of yellowish film over it all, which is…well, I’m not sure exactly what. But it’s there, I guess. Leia is packed with her own removable mask piece.

HAN SOLO

They sure did like Bespin Han in this line. We had four of them in Power of the Force, all pretty close to each other. This one’s a lot like the single release, but, much like Leia, the limbs are posed differently. It’s not a terrible sculpt to begin with, and this version slightly slims him down even further, so it’s not bad at all. There’s still that Power of the Force flavor, but it’s not over stated. His paint is pretty much the same. The jacket is still black, since that was the Lucasfilm line at the time. He’s packed with his blaster pistol, as well as another removable mask.

THE ME HALF OF THE EQUATION

This is actually one of the Cinema Scenes I was actively on the lookout for, and it still wound up being one of the very last two that I got.  Fitting, then, I suppose that I would save it to be the last Cinema Scenes set I’d review here on the site. I suppose there’s not a lot unique about the set, ultimately, but there’s a general vibe about it that I do quite like.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3668: Clone Captain Rex

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CLONE CAPTAIN REX

STAR WARS: THE VINTAGE COLLECTION (HASBRO)

Remember two weeks ago when I ended a lengthy hiatus from Vintage Collection with a review of a Bad Batch-based Captain Rex figure?  Did you know it was almost a review of a *different* Bad Batch-based Captain Rex figure from The Vintage Collection?  I mean, probably not.  I don’t tend to let other people know about my planned reviews in advance.  Anyway, there was the new Rex, so I hotplated him, but I didn’t want to just forget about the other one, so, two Rexes in one month?  Is that really so bad?  I don’t think so.

THE FIGURE ITSELF

Clone Captain Rex was released as part of the Amazon-exclusive Bad Batch-themed Star Wars: The Vintage Collection four-pack, alongside three other non-Batch troopers.  He’s numbered VC208, making him numerically the first of the four included figures.  He’s based on Rex’s incognito look from the show, just like his Black Series figure from the same time. The figure stands about 3 3/4 inches tall and he has 26 points of articulation.  Rex is built on the previous Clone Trooper base body, which was first introduced in 2011, and is…well, it certainly shows its age.  The articulation is the earliest implementation of “super-articulated” in its more modern sense.  There’s a lot of movement, but it’s not as intuitive, and it’s a little floppy.  He’s also rather lanky, made only more evident by the removable helmet, which bulks the head up.  He gets a new belt piece and pauldron, as well as a cloth kama and poncho.  The pauldron is a curious oddity, since it’s not the full thing, due to being based directly on the animation models, which had tweaked it so that it wouldn’t clip through the poncho.  It’s not actually meant to be seen, and was swapped out for the full version in all of the scenes without the poncho present.  The helmet is also tweaked to add his extra visor piece.  It’s articulated, but it’s also connected to the range finder, so they both move in tandem, which looks a little weird.  Under the helmet we get an unmasked head, which is just a standard clone head re-used, meaning it’s got too much hair to be Rex, since he had his close cropped hair still in Bad Batch.  The color work is decent enough.  Not too far removed from the more recent one, though the blue paint seems a little more wobbly.  There’s some slop on the hairline, but otherwise, application is decent and pretty clean.  Rex is packed with his twin blaster pistols, which he can hold or holster, as per usual.

THE ME HALF OF THE EQUATION

I like Rex a lot, but I wasn’t rushing out to buy three other figures just to get this one, especially because its a Vintage Collection release.  So, I opted to play the waiting game.  It worked out, because I was able to snag a loose one through All Time, when it was traded in a couple of months ago.  He’s a rather dated figure, and far moreso than he should be, given he’s only actually three years old.  But, he’s at least a more unique design, and he’s got the poncho to hide some of the worst of it.  Ultimately, it’s another Rex, and I can certainly dig that.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3663: Death Star Escape

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

HAN SOLO, CHEWBACCA, & LUKE SKYWALKER

STAR WARS: POWER OF THE FORCE II (KENNER)

“The Rebel Alliance has infiltrated the Galactic Empire’s most powerful battle station, the Death Star! posing as stormtroopers escorting a prisoner, Han Solo, Luke Skywalker and Chewbacca attempt a daring rescue of the captive Princess Leia. Can they escape the dreaded Death Star, or is the Rebellion about to suffer the loss of its newest heroes?”

Hey, Cinema Scenes!  It’s been a hot minute since I’ve looked at one of these!  While Kenner/Hasbro used the later run of Cinema Scenes to fill in more obscure characters from the background of specific scenes, the earliest run of the line was more about recreating distinctive scenes, often with variants of previously released figures from the line.  One of the earliest recreated scenes was the first film’s escape from the Death Star detention center, which I’m taking a look at today!

THE FIGURES THEMSELVES

The “Death Star Escape” set was the Power of the Force line’s debut Cinema Scenes set, released in 1997 as a Toys “R” Us exclusive.  As with all of the Cinema Scenes sets, in addition to the three figures, this set also included a stand, meant to look like a section of the Death Star’s floor.

HAN SOLO

Originally confined to a Froot Loops promotional offer, Stormtrooper disguise Han made a pretty quick reappearance here. The figure is about 3 3/4 inches tall and he has the usual 6 points of articulation. His sculpt is similar to the previous one, but different for the sake of different. His pose is certainly changed up, largely the arms, which are now stretched outwards. The prior version was one of the rare instances of a figure that could conceivably hold his weapon two-handed (though, ironically, he had no weapon to hold), but not so with this one, who is back to the single hand hold.  Han’s paint work is very similar to the mail-away version, but the plastic used is a little different.  The skin-tone on the head is paler, and the torso and pelvis are prone to discoloring over time.  Han is packed with his removable helmet, and a standard blaster rifle.

CHEWBACCA

Chewbacca doesn’t have a drastic shift in looks in the movies, so he didn’t have any drastic shifts in figures during Power of the Force either.  He started off with one figure to cover all of the movies, and this one is a very, very minor tweak on that.  The figure stands about 4 inches tall and he has 6 points of articulation, with the caveat of the neck not *really* moving.  He’s almost exactly the same figure as the standard release, with the only notable change being the position of the arms.  It’s Chewy at his most swoll, encapsulating the early line as a whole.  The color work is also pretty much identical, for what it’s worth.  He does get a new accessory, which is directly tied into the new arms: handcuffs!  Perfect for recreating the scene.

LUKE SKYWALKER

Luke’s Stormtrooper Disguised figure was a standard release, so we didn’t *need* a re-release, but, you know, you gotta finish up the scene, I guess.  He takes pretty much the same approach as the Han, replacing the more basic standing pose of the single release Luke with a a wider stance, even wider than Han’s.  He’s got the same basic color work, and he’s got the same issue with the discoloring on the torso and pelvis.  Paint work on the face is honestly a lot nicer, though, so he’s at least got that going for him.  And hey, look at that, same helmet and blaster as well.  Lot of same-ness going on.

THE ME HALF OF THE EQUATION

This is honestly a pretty common Cinema Scenes set, so it’s genuinely surprising it took me this long to get around to picking one up.  I guess the right opportunity never presented itself to me.  Well, you know, until it did, which is why I own it now.  I’d seen a couple of loose ones, but didn’t really want to go that route, but a sealed set came into All Time, and now I’ve got one.  It’s easily the weakest, most forgettable of these sets.  There’s nothing that really makes it worthwhile, and I genuinely only have it for completion’s sake.  I don’t know of any other reason to get one, but, at the same time, it’s not like it’s a *bad* set, or anything.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3658: Clone Commander Rex – Bracca Mission

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CLONE COMMANDER REX — BRACCA MISSION

STAR WARS: THE VINTAGE COLLECTION (HASBRO)

“Presumed dead at the dawn of the Empire, Rex operates in the shadows – helping any clone brothers who remain separate from the Imperial ranks.”

I haven’t reviewed a Vintage Collection figure since February of 2022, which is quite a while ago. To be fair, I haven’t bought any VC in that time either. I found myself experiencing diminishing returns as the price increased and the figures got more complex, but not so much more fun. But, well, there’s a new Rex, and he’s on my short list of characters that could get me to buy a VC figure. So, you know, that’s what happened. Thrilling, right? Well, let’s review this guy!

THE FIGURE ITSELF

Clone Commander Rex (Bracca Mission) is part of the latest assortment of Hasbro’s Star Wars: The Vintage Collection, which is a mid-summer release. He’s figure VC317, and officially hails from the Bad Batch sub-set of the line. I was intrigued by his “commander” rank, which he was granted during the Battle of Mandalore in Clone Wars, but which I’m also pretty sure Jesse stripped him of when Order 66 kicked in. I suppose with the whole Republic Army dismantled and the whole dying thing, Jesse may not have officially filed the necessary paperwork, so I guess Rex gets to keep the higher rank? It does at least help to further differentiate from the other two VC Rex figures (though one of those is *also* from Bad Batch, which just further confuses whether he kept the promotion or not).  The figure stands 3 3/4 inches tall and he has 26 points of articulation.  Rex’s largely built from the most recent revamp of the Clone Trooper body, introduced last year.  It’s a good starting point.  The articulation scheme here is more in line with where the larger scale was a few years ago, which is good for range and stability, especially at this scale.  I found it much easier to get him into poses and also keep him standing than typically is the case with Vintage Collection figures.  That’s a very welcome improvement.  He gets a new head sculpt, which is just the helmet.  It’s a good recreation of Rex’s modified helmet from later in the show, improving even on the earlier small-scale Black Series sculpt.  He also gets a new pauldron and belt.  The pauldron’s a little floaty for my taste, but the helmet at least helps keep in place in a lot of poses.  The belt also gets a fabric skirt piece, which is much better for posing than the sculpted one from the earlier Rex.  It sits a little odd on the front, but generally looks okay.  Rex’s color work isn’t too bad.  It’s more on the basic side, going for a cleaner Rex than we’ve seen previously.  We do still get his tally marks, since it’s a Phase II model, and they’re nice and clean.  I counted 161 this time, which is down by two from the smaller Black Series…I think.  I may have miscounted on one of them, though, so don’t quote me on it.  Rex is packed with an alternate unmasked head, as well as his twin blaster pistols.  The head does get his slight scar on the temple, indicating it’s a post-Order 66 Rex, as it’s meant to be.  It still looks a little weird to me to have him with the Morrison likeness, but it is what it is.

THE ME HALF OF THE EQUATION

Every time I’m tempted by a Vintage Collection figure, I try to remember that it’s generally not a line I’m super into, and that I don’t tend to enjoy the figures once I get them in hand.  As such, I wasn’t initially planning to grab this one.  I am, however, weak.  Once I saw him in person, I had a hard time saying no.  I felt like I was gonna regret it…but I actually don’t?  I don’t like the pauldron.  It’s floaty and the exact sort of thing that bugs me on this line.  That said, it’s a small thing, and the rest of the figure’s enough to offset it.  He’s actually a lot of fun, and a lot more sturdy than I expected.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3630: ARC Trooper Commander

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ARC TROOPER COMMADER

STAR WARS: THE CLONE WARS (HASBRO)

Fun FiQ Fact #0109: This is the third time I’ve reviewed a Captain Fordo that doesn’t bear the name “Captain Fordo.”

No, you’re not losing your mind, my review numbers really did jump by 300.  Apparently, I jumped *back* 300 in July of last year.  And none of you even told me.  For shame.  Well, I’m fixing it now.

You know, it’s been almost exactly a year since I’ve talked about the tie-in line for the 3D Clone Wars show.  That feels like a while, especially since it’s one of my top 2 Star Wars lines.  So, I’m taking a look at another one of those.  But, in an amusing turn of events, it’s a character that’s not even from the 3D show.  Weird, right?  Also, the last figure I looked at of this character was live-action styled, so, you know, there’s some fun coverage there, I guess.  So, without further ado, here’s another Captain Fordo!

THE FIGURE ITSELF

Captain Fordo, who was dubbed “ARC Trooper Commander” on the box, was released in 2010 as part of the “Arc Troopers” Battle Pack from Hasbro’s Star Wars: The Clone Wars tie-in line.  The figure stands 3 3/4 inches tall and he has 24 points of articulation.  For the most part, Fordo is making use of parts from the line’s first version of Captain Rex.  He’s got a modified kama, which has slightly larger holsters, as well as a new shoulder pauldron with pouches on the front.  He’s also using a solid helmet, rather than the removable one from Rex.  He’s got a rangefinder, which is articulated.  Topping it all off, there’s also a removable wrist piece, which further changes up the look.  The core figure was a solid sculpt to begin with, and the new parts work well in conjunction with it.  The end result is a sensible upgrade of Fordo’s look to the 3D stylings.  Fordo’s paint work is pretty solid.  They’d moved away from doing the dirtied up white sections, which works better for Fordo’s 2D show origins.  They gave the markings on the armor a little bit more wear, however, which aids with his adapting to the new look.  Captain Fordo is packed with two modified blaster pistols, a rifle, and a display stand.

THE ME REMAINDER OF THE EQUATION

I love Fordo as a character, but getting figures of him can be pretty tricky.  This one in particular is a really rough one, since he’s not officially named, and just sort of thrown in with a random selection of other unnamed figures.  I wasn’t up on the line quite so much at the time, so I didn’t even know about his existence until well after he’d shot up in price on the aftermarket.  However, in the midst of me having a very bad year in 2021, one got traded into All Time, and I decided that was my time to jump on him.  He’s been waiting to be reviewed since then.  He’s not a perfect figure, but he’s another fun version of Fordo, and I’ll never knock that.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3625: Cassian Andor & B2EMO

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CASSIAN ANDOR & B2EMO

STAR WARS: THE BLACK SERIES (HASBRO)

Fun FiQ Fact #0104: Diego Luna, who plays Cassian Andor, was in the 2004 movie The Terminal, where his character’s love interest is a Trekkie played by Zoe Saldana.

Amonst the handful of character spin-off shows we got in the last year and some change was Andor, a prequel to Rogue One, focusing on Cassian Andor before he joined the Rebellion.  Rogue One was certainly a change of pace for the franchise, and Andor was even more so.  One of the biggest things about Andor was that it really wasn’t built for merchandising the way the rest of the franchise is.  People just don’t rush out to buy action figures of all the morally questionable players from a show based heavily on political intrigue, I suppose.  Well, I don’t suppose.  I actually know.  Because, as it turns out, I’m one of the people.  I very much enjoyed Andor, but I also didn’t go out and buy, you know, any of the figures from it.  I’m part of the problem, guys.  But, maybe I’m working on that?  No, I’m not, but I did at least wind up with an exception.

THE FIGURES THEMSELVES

Cassian Andor and B2EMO were released as part of Star Wars: The Black Series in the fall of 2022.  The set was initially exclusive to Hasbro’s online PulseCon event, but it was ultimately distributed through other venues when it was met with a softer than anticipated reception.  The Cassian figure is the same as the mainline release, while B2EMO remains, to date, exclusive to this pack.

CASSIAN ANDOR

Cassian was already no stranger to figures thanks to the various Rogue One tie-ins, but Andor elevated that, giving him the Jyn Erso-style “we’re shoving the standard look into multiple releases” treatment. The figure stands about 6 inches tall and he has 27 points of articulation. For Andor, Cassian is a lot rougher around the edges than when we catch up with him in Rogue One, and his main look shows that off. He’s got a lot more layers all thrown together a bit more haphazardly, and his hair is a fair bit shaggier. The new sculpt does a good job of following the look. The head gets a better likeness of Luna than the Rogue One stuff did, and the ratio of sculpt integrity to range of motion is a pretty good one. His coloring is a lot of brown. Like a lot. Very brown. It’s accurate, though, and the paint work handles it all pretty well. Cassian is packed with a blaster pistol, and that’s all.

B2EMO

Look, we all know why we’re here, and it’s B2EMO. Since K2 isn’t yet reprogrammed, Cassian needs another droid to pal around with, and that’s B2EMO. He’s like Marvin, but squarer. Same disposition, though. The figure is about 2 1/2 inches tall. He can collapse and extend his core body, as well as his little casters he uses for feet, and his head has a swivel joint. B2EMO is a rather unique looking droid, and so he gets a unique sculpt as well. It’s a very good one. Hasbro knows how to sculpt a good droid. All of the moving parts fit together well, and he’s got the appropriate denting and damage. Certainly an accurate depiction of the droid from the show, I’d say. His color work is a little more exciting, being reds and blues. He’s still muted, of course, but it’s at least a little different. The paint work continues the wear and tear started by the sculpt, resulting in a sufficiently used looking bot. B2EMO is without accessories…or, depending on how you look at it, he includes a whole Cassian as an accessory. That seems like a better value, I suppose.

THE ME REMAINDER OF THE EQUATION

I liked B2EMO a lot in the show and wanted a figure, so I was tempted by this set, but it just felt far too expensive for what you got, so I passed. It did the rounds and got cheaper and cheaper, so by the time one with popped tape seals came into All Time, it was so cheap I didn’t feel like I could pass it up. Cassian is an okay figure, just not one I needed. B2EMO, however, is a fantastic little biscuit of a figure that I’m very glad to have.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3620: Darth Vader – Duel’s End

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DARTH VADER — DUEL’S END

STAR WARS: THE BLACK SERIES (HASBRO)

Fun FiQ Fact #0099: This is the 17th Darth Vader I’ve reviewed on the site.

In addition to the return of Ewan McGregor in the title role, Kenobi also brought back Hayden Christensen, now not just playing Anakin, but in fact playing a full-fledged Darth Vader. I never had the full-fledged hate-on for Hayden’s work in the prequels the way others did (though I’ll admit to getting in on some of the joking about it when the prequels hate was at its height), and it was super cool to see him get to do more work with the character. His Kenobi portrayal brought out a rawness to Vader that we hadn’t really seen in live action, and that was really impressive. I skipped the standard Kenobi Vader from Black Series, since he was very similar to other releases, but I couldn’t turn down a shot at a more obviously show-specific version!

THE FIGURE ITSELF

Darth Vader (Duel’s End) is figure 15 in the Kenobi-sub-set of Star Wars: The Black Series. Like the rest of the back portion of that set, he was an exclusive, specifically to Target, hitting at the end of last year.  As the figure’s name indicates, this guy is based on his appearance at the end of his climactic duel with Obi-Wan, after Ben’s given him quite a beating.  The figure stands a little over 6 1/2 inches tall and he has 26 points of articulation.  This figure is obviously using a good deal of parts from the standard Kenobi Vader, which itself was mostly re-use from the #43 Vader.  Once you’ve got a good base Vader sculpt, you just really need to move some details around, so I can get it.  He does get an all-new head and torso, though.  The torso gets some minor change-ups, with the slashes across his control box, as well as the one on his back (which is very easy to miss).  The head’s the real star piece, though, as the helmet is split open, revealing traces of the scarred Anakin beneath.  There’s a whole head sculpt under there, which is fun, even if you can’t see the whole thing.  The split helmet is great, because it’s got the proper updated look from the show on the undamaged parts, while also replicating the damage very nicely.  As with prior Vaders, he’s using soft goods for his cape and underlying robe.  The tailoring is a little better here than the prior ones I’ve messed with, and they even added extra damage to everything to match up with his sculpted damage.  The only issue I’ve got with it is that, at least on mine, the robe isn’t all the way under the shoulder armor the way it should be.  Vader’s paint work is standard Vader for the most part, but he does get some more exciting parts with the head under the helmet.  Vader is packed with his lightsaber and…well, that’s it.  It’s light, but it’s Vader, so we all kind of know what to expect, I guess.

THE ME REMAINDER OF THE EQUATION

I don’t really play the exclusives game, so I wasn’t thrilled by this one being only at Target.  But, over a long enough period of time, pretty much everything seems to show up in front of me, so I was able to snag one that got traded into All Time.  I’m glad, because I didn’t need the basic Kenobi look, but after getting Jabiim Kenobi, I really wanted a Vader to pair off with him.  This one’s an impressive piece in his own right, and a great companion piece too!

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3615: R2-D2 (Artoo-Deetoo)

Posted by Ethan Wilson in Reviews and tagged with , , , ,

R2-D2 (ARTOO-DEETOO)

STAR WARS: THE BLACK SERIES (HASBRO)

Fun FiQ Fact #0094: This review was supposed to run back in January, but I misplaced the figure before getting photos, and only just unearthed him last week.

I have a soft spot for robots, but for reasons that don’t really line up internally, I have a hard time getting excited about R2-D2 figures. I don’t know why. Other droids I can get excited about, even other Astromechs. Hand me an R5 and I’m thrilled. But R2? Not the same. Maybe he’s just too central a character, kind of like my thing with Duke and Optimus? It’s not that I dislike the character, nor that I don’t *want* to own him in figure form. So, I do buy him…I’m just less enthusiastic about it.

THE FIGURE ITSELF

R2-D2 (Artoo-Deetoo) was initially released as part of the third series of the Return of the Jedi Retro Carded Black Series figures.  He was then subsequently re-released, now bearing branding from The Mandalorian, in the last standard Black Series assortment of last year, alongside Hera, Huyang, Marrok, and Pre Vizsla.  It’s worth noting that the figure reviewed here is the standard assortment version, but the two releases appear to be identical.  The figure is a little under 4 inches tall and he has 11 points of articulation.  One of the more notable issues with the last astromech mold is how small it was; Lucasfilm has gone back and forth on their standards for R2’s scaling, and when the original Black Series release hit, they were opting for smaller than he actually was on screen.  The standards have changed again since, but there was already a mold, and Hasbro stuck with it for as long as they could.  This new one, however, aims for more proper scaling, adding about 3/4 of an inch, and generally scaling him up to match.  The sculpt is, at least outwardly, very similar to the previous one, just bigger.  The general articulation scheme is similar as well, with basic swivels at the shoulders and ankles, and hinged doors on the sides.  He also has opening flaps on his front, and now has a swivel at the top of the third leg.  Additionally, the way the third leg works has been re-worked, so it’s no longer connected to the head spinning.  The head now can spin 360 degrees unimpeded by the mechanism, and the leg doesn’t require the head to spin to lower it.  While it’s less gimmicky and odd, it’s also a lot harder to get the third leg out once it’s been retracted, so it’s a 50/50 on which approach is better.  The head now gets is own extending feature, based on unused concept work for The Phantom Menace.  It’s goofy, and certainly not essential, but it’s also a fun little extra.  R2’s paint work is decent enough.  It’s all pretty cleanly handled, and again pretty much matches what was done on the original.  It’s all pretty clean and sharp, and it looks appropriately the part.  R2 is packed with four different arm attachments, plus his periscope and radar attachments for the head.  He lacks the thrusters and the lightsaber (especially notable since his first release was on the RotJ card) of the first one, but there’s at least some nice options here.

THE ME REMAINDER OF THE EQUATION

I struggled getting enthused for the first R2 from the line.  The second I did better with, since the Dagobah look is a little more exciting.  This one’s effectively the original but bigger, so I wasn’t even sure I was going to buy him at all.  But, I was getting the rest of the set, and he did look pretty solid in person, so I broke.  And then, you know, I lost him.  As you do.  But I found him, so it’s alright.  He’s not bad.  The scaling is better, and some of the features a better refined.  He’s also notably sturdier, which I do like.  So, he’s fun.  But he’s R2, so I’m back to struggling to get excited.  Maybe I should have gotten the updated R5 instead?

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3610: Spacetrooper

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPACETROOPER

STAR WARS: THE LEGACY COLLECTION (HASBRO)

Fun FiQ Fact #0089: Joe Johnston, director of Jumanji, The Rocketeer, and Captain America: The First Avenger, amongst other things, worked in the visual effects department for the original Star Wars trilogy, and had a hand in the design of both Boba Fett and his ship.

These days, my Star Wars collecting is rather focused.  I pick up the odd Black Series figure here and there, but beyond that, I’ve got my Power of the Force collection, and a selection of favorites from Clone Wars.  The other lines I generally skip, but there’s the occasional figure here and there that pique’s my interest, especially when it comes to the more fun behind the scenes stuff.  Like, for instance, today’s focus, the Spacetrooper!

THE FIGURE ITSELF

The Spacetrooper was part of the fifth assortment of Star Wars: The Legacy Collection, where he was numbered BD-32.  He was subsequently re-released the following year in a repack assortment with a new Build-A-Droid part.  All of the fifth assortment figures were based on A New Hope, and this guy was no exception; the Spacetrooper is visible outside the Death Star when the Millennium Falcon is pulled in by the tractor beam.  Essentially, he’s a standard Stormtrooper, with two extra bits to make him space ready.  The figure stands 3 3/4 inches tall and he has 22 points of articulation.  The movement on this guy represents pretty much the height of articulation for Star Wars prior to them finally doing away with the T-crotch joint that George Lucas apparently mandated.  It’s a rather mobile figure, but also kind of stiff?  I don’t know.  It’s certainly not bad for the time or the scale, and it’s less floppy than newer Star Wars figures.  The Spacetrooper’s sculpt used the sculpt that originated with the Vintage Original Trilogy Collection Stormtrooper as its starting point, but got an updated head and torso, and seems to generally be a slightly sharper rendition of the sculpt.  He’s got a removable helmet, which matches well with the non-removable equivalent for this body sculpt, and underneath, he’s got a head sporting the likeness of Joe Johnston, who was the guy actually in the Spacetrooper armor on set.  The paint work is decent enough; he’s got the basic black and white set-up, with the extra details under the helmet and all.  The Spacetrooper is packed with his rebreather pack and hose, which plug into his helmet and back, and are fairly secure.  He also gets a standard blaster, as well as a larger rifle, complete with moving handle.

THE ME REMAINDER OF THE EQUATION

I wasn’t really collecting much Star Wars when this figure came out, so I missed him when he was new.  He always intrigued me, though, so when I found a loose complete one through All Time, I jumped on it.  He’s a fun little figure, and, hey, now I’ve got a Joe Johnston figure!

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.