Tag Archives: Stormtrooper

#1296: First Order Stormtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FIRST ORDER STORMTROOPER

STAR WARS: ELITE SERIES (DISNEY)

“Equipped with sleek armor and powerful weapons, the Stormtroopers enforce the will of the First Order.”

Wow, that’s the same bio used on the Hasbro Black Series figures.  I guess Disney’s really strict about what goes in those bios.  I mean, I guess it’s a decent enough write-up for the Stormtroopers.  It’s not like there’s a whole lot to them, right?  So, hey, it’s been a while since I reviewed a basic Stormtrooper (First Order or otherwise).  How about one of those?  This time, the figure’s metal.  Oooooooooh!

THE FIGURE ITSELF

The First Order Stormtrooper was released as part of the very first series of Disney’s Star Wars: Elite Series, which hit way back on the first Force Friday event.  The figure stands about 7 inches tall and he has 16 points of articulation.  He’s very similar in construction to the previously reviewed Poe figure (metal for the torso,arms, and legs, and plastic for the hands, feet and head), though he does feel a bit lighter weight.  That’s probably due to the slightly more svelte design.  He’s still rather restricted in terms of movement (he’s yet another FO Trooper that can’t actually hold his blaster two-handed), but he’s on par with the other two figures I’ve gotten.  It could certainly be worse.  While there was a definite upturn in the level of detail displayed on the K-2 figure, the Trooper, as an older release, is still rather on the soft side.  Given the sleeker nature of the Stormtroopers, it’s not too bad, but he does miss out on the fun underlying jumpsuit details that we saw on the Black Series version of this design.  On the plus side, he lacks the weird hand thing that plagued the Poe figure, and just seems to have better proportions in general. He also doesn’t face any issues of facial likeness, which seems to alleviate a major issue the Disney figures seem to face.  Like both prior Elite Series figures I’ve looked at, the Stormtrooper is assembled using screws along the back of the figure.  10 of them to be exact.  While K-2 added covers so as to prevent them from ruining the aesthetics, the Stormtrooper takes after Poe, which means his assembly screws are left totally uncovered.  It’s definitely distracting, but at least it’s confined to the back of the figure.  The paint on the Stormtrooper is decent enough; it’s not like there’s a lot of really complex work or anything going on, so there’s less that can be screwed up.  There’s still some slight slop here and there, but for the most part he looks pretty clean.  The figure is packed with two blasters (one large and one small) and a display stand, which is the same as the ones included with Poe and K-2.  The smaller blaster is designed to be stowed on the right thigh, but I ended up having to do a little work on my figure to get the two pieces to fit together, due to a slight malformation of the gun.

THE ME HALF OF THE EQUATION

This figure was given to me by my friend Rio, who is an exchange student visiting from Japan.  Rio has been staying with one of Super Awesome Girlfriend’s friends, and has become a fixture of our group of friends over the last several months.  She also really likes to give gifts, so she’s made a point of getting something for each of us over the course of a few trips she’s made to various attractions.  When she traveled to Disney World, she got something for Super Awesome Girlfriend, but not for me.  I wasn’t expecting anything, so I was far from upset, but Rio wanted to get me something.  On her trip to NYC over spring break, she tracked down the Disney Store and, with a little guidance from Super Awesome Girlfriend, picked this guy out for me.  He’s actually pretty cool, and you can never have too many Stormtroopers, right?  Anyway, Rio is heading back home to Japan today, so I thought I’d give this figure a review as a send off and a testament to how great it’s been to have her around these last few months.  Good luck, Rio!

#1276: Shoretrooper

Posted by Ethan Wilson in Reviews and tagged with , , ,

SHORETROOPER

STAR WARS: ROGUE ONE (HASBRO)

“Specialist Stormtroopers stationed at the top-secret Imperial military headquarters on Scarif, these Shoretroopers patrol the beaches and bunkers of the planetary facility.”

Okay, is it “Shoretrooper” or “Scarif Stormtrooper?”  Make up your minds already!  I mean, at least before it was a company to company thing, but now Hasbro, who have up to this point labeled every other version of this squad as “Scarif Stormtrooper,” jumping on the “Shoretrooper” bandwagon.  Why just this one figure? Why!?!  I NEED TO KNOW!!!!

Okay, actually it doesn’t really matter all that much.  It’s really neither here nor there.  Figures have names on the package, and then the package gets thrown away.  The name on the box could have been Throat Warbler Mangrove, and I’d still buy it.  Because its the Scarif Trooper, and that’s, like, my new favorite Imperial design!

THE FIGURE ITSELF

Okay, so the *Shoretrooper* was released in Series 3 of the Rogue One line.  There are a number of different variations of this armor, denoting ranks and the like.  This guy here is the most basic of the bunch; he’s the real cannon fodder.  He’s also the same design as the Walmart-exclusive 6” Scarif Stormtrooper.  The figure stands about 4 inches tall and has the usual 5 points of articulation.  It appears that this figure uses the same mold as the AT-ACT Driver, which I never actually got (because $300 is a lot of money).  It’s worth noting that this mold does *not* share any parts with the Squad Leader figure.  That’s probably a good thing, because, while I like that figure, his sculpt does have some issues.  This one improves the shaping of the helmet, and adds a few details that were missing at the top.  It also adds some nice texturing to the pants, and gives the overall figure a less stiff posture.  All of those things are definite positives.  Also, we’ve flipped back to a separate attachment piece for the “skirt,” as opposed to one that’s stuck to the legs.  It’s my preferred way of handing it to be sure, but it just seems a little odd that they go back and forth.  The paint on this guy is pretty much what we’ve come to expect from this line.  All of the basic details are there, and the colors match up well enough with the on-screen stuff.  The application is mostly pretty clean, with some slight bleed here and there, especially at the edges at the pants.  He lacks the weathering on the larger figures, but that’s the difference between the two lines.  The Shoretrooper is packed with the same larger blaster rifle included with the Squad Leader, as well as…wait for it…a zipline.  Oh yeah, those ziplines!  This one’s got a retracting feature, which is different, I guess.  Yay?

THE ME HALF OF THE EQUATION

As I’ve noted numerous times in the past, the Shore/Scarif Trooper is a favorite design of mine, so I’m down for pretty much every figure they release of it.  Of course, like I said in yesterday’s Bodhi review, Series 3 hasn’t been very prominent much of anywhere at retail, so I didn’t really have any chances to pick this one up.  I ended up finding him at the same time as Bodhi, and certainly wasn’t going to pass him up.  He’s a decent enough figure for the basic line.  If you like this design, you could do worse than this figure.

#1223: Governor Tarkin & Stormtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

GOVERNOR TARKIN & STORMTROOPER

STAR WARS: COMIC PACKS (HASBRO)

tarkintrooper1

Back before they were both owned by the same parent company, the first comic book company to hold the Star Wars license was Marvel Comics.  They had a pretty solid run with the license, going a full decade.  The series started off with a pretty straight adaptation of the events of A New Hope, and then eventually filled in the gaps between movies with some of the earliest Expanded Universe stuff.  When Hasbro started releasing packs based on specific comic stories and issues, the Marvel stuff was right at the forefront, including today’s pair, Governor Tarkin and an Imperial Stormtrooper!

THE FIGURES THEMSELVES

Tarkin and the Stormtrooper were part of the very first series of Star Wars: Comic Packs from Hasbro.  They were pack 03 in the line, and included issue #2 of the Marvel Star Wars comic (albeit with all the Marvel stuff scrubbed off and replaced with Dark Horse, the then current holders of the comic license).

TARKIN

tarkintrooper2This was only Tarkin’s third time in the 3 3/4 inch scale, which is honestly a bit surprising.  In the Marvel adaptations, the colors were rather different from the movie, in order to make some of the designs a bit more comic friendly.  Tarkin and the rest of the Imperial officers were dressed in grey in the film, which was a rather difficult color to replicate with 1970s printing processes.  So, Marvel changed their pallet to something more akin to Hydra, their in-house branch of fascists.  The figure stands about 3 3/4 inches tall and has 10 points of articulation.  As far as structure, he’s a pretty straight re-use of the Revenge of the Sith version of Tarkin.  It’s slightly odd, since that’s not actually a Peter Cushing Tarkin sculpt, but it was the most recent Tarkin sculpt at the time, and, by virtue of being meant to emulate a comic version of the character, I guess he’s not really that far off.  The sculpt is a decent enough piece of work.  He’s rather cartoony, which ends up working a bit better for this particular figure than it did the originator of the sculpt.  There’s not much in the way of posability, but Tarkin was never a super mobile sort of dude, so I guess that’s okay.  The paint work is okay in some spots (mainly on the head), but really bad in some others (mainly anything that’s yellow).  Seriously, I’ve painted customs that looked more professional than this.  Maybe the yellow’s so off because it’s not actually following any sculpted lines?  Tarkin was packed with a standard Stormtrooper short blaster, which is better than nothing, I suppose.

STORMTROOPER

tarkintrooper3The Stormtrooper’s comic design was more or less the same as the movie look, which makes this figure a bit more reliant on replicating comic shading than anything else.  The figure stands about 3 3/4 inches tall and has 13 points of articulation.  Not an awful amount of articulation, but slightly disappointing.  See, this figure is a repaint of the CommTech Stormtrooper, which was, at the time of this figure’s release, 7 years old.  That’s not an insane age for a Star Wars mold, and it’s a decent enough sculpt, but the issue that really arises is one of consistency.  The comic versions of Han and Luke from this same line were both also sporting the Stormtrooper armor, but those two figures were built on the body of the Vintage Collection Stormtrooper, which was quite a bit more advanced than this one.  Why didn’t Hasbro just use that body for this guy too?  Wouldn’t that make more sense?  Then he’d at least be able to hold his gun the right way.  Oh well.  The main selling point on this guy is the light blue shading of the paint, which showcases the whole dynamic lighting thing of the comics.  It’s replicated pretty well here, though, as with most figures of this nature, it really only works from select angles.  The Trooper is packed with a Stormtrooper longblaster, which, as I noted above, he can’t actually hold.

THE ME HALF OF THE EQUATION

Like last week’s Baron and Hobbie, this pair came from my Super Awesome Girlfriend.  This is actually a set I almost picked up a few times back when it was new, but never got around to.  Now I understand why.  I’m not an advocate for leaving toys in the package, but this is definitely one of those times where I was more impressed with something before I took it out and played with it.  Both figures are perfectly fine, and I’m happy to have them, but the execution could have been so much more!

#1214: Cassian Andor & Imperial Stormtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CASSIAN ANDOR & IMPERIAL STORMTROOPER

STAR WARS: ROGUE ONE (HASBRO)

cassiantrooper2

Hey look!  More Star Wars stuff!  Yeah!  ….Sorry, sometimes I run out of things to say, so that’s the best intro you’re gonna get out of me.  Let’s just get to the figures already!

THE FIGURES THEMSELVES

Cassian and the Stormtrooper are a Toys R Us-exclusive two-pack, which started hitting in early January of this year.  Really, the only exclusive part of the set is pairing; both featured figures have (more or less) been released elsewhere, with Cassian being included with the U-Wing and the Trooper being a standard Series 1 release.

CASSIAN ANDOR

cassiantrooper3This guy’s really the main reason I grabbed this set, since I never picked up the U-Wing.  Thus, my only small-scale Cassian was the Eadu version I looked at back in December, which wasn’t my favorite.  This figure stands a little under 4 inches tall and has the standard 5 points of articulation.  Where I felt the last Cassian was sporting one of the line’s weakest sculpts, I think this may be one of the better ones.  The build is appropriately scrawny, and more in line with Diego Luna’s build than the other Cassian figures have been.  The details on the clothing are also really crisp and sharp, which is especially good given the scale.  The face still isn’t a spot-on Luna likeness, but it’s probably the best one of the bunch, certainly better than the Black Series sculpt.  A slightly better paint job might due its share to fix the resemblance, I suppose.  Speaking of the paint, it’s not terrible.  In fact, going by reports online the cleanness of the application on this figure is much better than that of the U-Wing cassiantrooper5figure, which gives this particular version a leg up.  There are still some parts, the beard in particular, that could stand to be a little more consistent, but at this scale and given the rest of the line, this is pretty good.  Cassian includes his small blaster pistol (sadly, it’s solid silver plastic, a bit of a step-down from the Series 2 figures).  There’s also yet another grapple contraption and a big missile launcher, which I’m lumping in with Cassian, but could honestly go with either included figure.

IMPERIAL STORMTROOPER

cassiantrooper4Remember my review of the Rogue One Series 1 Stormtrooper?  Yeah, this is pretty much the exact same figure.  Not that I’m complaining, of course.  I loved the figure the first time around, and as a troop builder, it’s the sort of figure that I don’t mind having multiples of on the shelf.  There are some slight changes in the paint; he ends up somewhere between the single version and the one packed with Baze.  He’s got the black details on the abdomen that the single release was missing, but still lacks the details on the back of the helmet.  The figure sports the same accessory compliment as the single release: the blaster and the chest-piece.  The pauldron is white this time instead of orange, which is a nice change for variety’s sake, though it’s not like I’ll actually be displaying him with that piece in place.

THE ME HALF OF THE EQUATION

Big shock, I got this here Toys R Us-exclusive from a Toys R Us, back in early January.  I’d been patiently waiting for its release, since I wanted a brown-jacket Cassian, and didn’t really want the U-Wing (especially after seeing how small a role it played in the final film).  There’s not really anything new here, but its certainly still a fun little set, especially if you haven’t been following the line super closely.

#1194: First Order Stormtrooper Squad Leader

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FIRST ORDER STORMTROOPER SQUAD LEADER

STAR WARS: THE FORCE AWAKENS

fosquadleader1

It’s been almost a week since the last time I looked at a Star Wars toy.  And I amassed quite a number of them towards the backend of last year, so there’s just sort of this pile of them waiting to be reviewed.  Here’s one off the pile.

THE FIGURE ITSELF

fosquadleader2The First Order Stormtrooper Squad Leader was part of the early 2016 Snow Gear assortment, alongside unmasked Kylo Ren and Nien Nunb).  The figure stands a little under 4 inches tall and has 5 points of articulation.  In terms of construction, the Squad Leader uses the same basic tooling as the standard FO Trooper (and by extension, all of it’s deviations, reviewed in the First Order Legion set), which is sensible.  As I noted when I reviewed it before, it’s a pretty strong sculpt, and accurately recreates the First Order armor from the movie.  The main appeal of this figure is the web-gear, which is unique to this guy.  It’s a combination of the Heavy Artillery Trooper’s ammo vest with an Officer’s pauldron.  It’s different enough to keep him interesting, which I guess is the point.  Paintwork for this figure is pretty much on par with the other FO Troopers I’ve looked at.  There are some fuzzy lines here and there, but by and large he’s pretty good.  The Squad Leader includes a basic blaster rifle, as well as a much larger blaster that’s part of the build-a-whatsit.  It’s kind of a cool piece, though it’s actually taller than he his, so getting him to hold it is kind of tricky.  Still, better than a lot of the pieces included with these figures.

THE ME HALF OF THE EQUATION

Being part of one of the later assortments of the Force Awakens line, this guy never really showed up at retail in full force.  I ended up getting this guy from Cosmic Comix during their Biggest Sale of the Year! (TM).  I like the Heavy Trooper look, and I liked this variation of it, so I got him.  Is he really different from figures I already own?  Not really, but he’s still pretty fun.

#1164: Scarif Stormtrooper Squad Leader

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SCARIF STORMTROOPER SQUAD LEADER

STAR WARS: THE BLACK SERIES

scarifsquadleader1

Like pretty much every single Star Wars film, Rogue One introduced it’s own set of faceless troopers, variations on the original Stormtroopers.  In addition to the basic Stormtroopers and TIE Fighter pilots, we also got Krennic’s bodyguards the Death Troopers, a few new vehicle pilots, and (my most favorite) the Scarif Troopers (also known as the Shoretroopers, a name I kind of prefer).  None of them really amounted to all that much in the final film, but they did make for a slightly more diverse selection of faceless mooks for the heroes to take out right and left.  There were a few different types of the Shoretroopers featured, and thus there are few different figures available.  I’ve already looked at the Black Series version of the basic Shoretrooper, but there’s also the Squad Leader, which I’ll be looking at today.

THE FIGURE ITSELF

scarifsquadleader2The Scarif Stormtrooper Squad Leader was released as part of the second assortment of Rogue One-themed Star Wars: The Black Series figures, which, as I noted in yesterday’s Krennic review, is actually the eighth series of red-boxed Black Series figures.  The Squad Leader is figure 28, making him the second numerically in this series of three.  The figure stands just shy of 6 1/2 inches tall and he has 27 points of articulation.  For the most part, I’ve seen this figure before, both in terms of design, and in terms of the actual pieces in use.  Of course, he’s sporting the same design as the smaller Squad Leader, albeit slightly more detailed.  As far as pieces, he’s built on the Hovertank Pilot body, just like the basic Shoretrooper, and also makes use of the same helmet as the basic Shoretrooper.  These remain good pieces, and I can hardly fault the re-use, since they should be consistent.  He gets a new belt piece, which features the kama sported by the Squad Leader.  Surprisingly enough, the articulation isn’t all that affected by the new piece, and the general quality of the sculpt matches well with the rest of the pieces.  Most of the new-ness of this figure comes from the paintwork.  At the most basic level, it’s pretty similar to the basic Shroetrooper, which makes sense.  He’s also got a lot of very similar weathering to that figure, though it should be noted that it’s slightly different, which prevents the two of them from looking too cookie-cutter.  The main difference between the two figures is the presence of the blue detailing on his upper torso and left shoulder.  It does a lot to differentiate him, and I like the extra splash of color it adds.  In addition, the weathering seen on the rest of the armor is also seen on the blue sections, which looks pretty cool.  The Squad Leader includes a larger blaster rifle.  It’s got the same base as the usual Stormtrooper blaster, but with a number of extra add-ons.  It makes for a pretty fun new design.

THE ME HALF OF THE EQUATION

As with Krennic, the Squad Leader was picked up for me by Super Awesome Girlfriend, during a bit of a “stress buy.”  After getting the smaller version of this guy, I definitely wanted the larger one too, though I initially thought I’d be okay with the basic Shoretrooper.  Once I saw this guy, I knew I needed him too.  He’s just as much fun as the basic trooper, and I’m very happy to have gotten him.

Also, fun fact: the Rogue One products were solicited to retailers using code names.  The Rebels and the Imperials were the “SEALS” and “SHARKS,” and each figure was then given a short descriptor.  It seems Walmart never changed the codenames to the real names in their system, so this guy rung up as “SHRK TOOPER” which I found rather amusing.

scarifsquadleader3

#1151: Scarif Stormtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SCARIF STORMTROOPER

STAR WARS: THE BLACK SERIES

scariftrooperbs2

Last night, showings started for Rogue One. I was traveling yesterday, so I won’t actually be seeing it until later this evening, but I sure hope it’s good. I’ve got one more Rogue One-related review lined up for today. This one gives us another look into some of the Empire’s new (well newly appearing, anyway) Troopers, specifically of the Scarif variety. I’ve already looked at one of the Squad leaders, but now I’m looking at one of regular grunts!

THE FIGURE ITSELF

scariftrooperbs3The Scarif Stormtrooper is Walmart’s Star Wars: The Black Series exclusive for 2016. He just started hitting right at the beginning of December, but as is always the case with these sorts of figures, he might be more prevalent in some areas than others. The figure is about 6 inches tall and he has 27 points of articulation. I’ve already covered a lot of this figure before, thanks to most of his parts being shared with the TRU-exclusive Hovertank Pilot. This figure is really just a new head and belt/skirt. The designs share a lot of common pieces on the actual costumes, so the reuse is certainly warranted, and I had actually guessed this reuse was imminent when I reviewed that figure. It’s certainly a decent base body to start with, and I like it just as much here as I did the first time around. The new pieces mesh quite well with the preexisting parts, and look to be fairly accurate to the movie. The paint work on this guy is pretty solid, and actually a bit better than a lot of prior Black Series releases. The colors match up pretty well with the movie designs, and the base work is all pretty clean. What’s really cool is there’s even some additional accent work and weathering, which helps to make the Trooper look nice and battle worn. After a disappointing number of totally spotless figures, it’s a refreshing change of pace. The Scarif Trooper’s only accessory is a basic Stormtrooper blaster, though it’s worth noting that this blaster’s got the extra detailing that we saw with the Eadu Jyn, which is cool to see be a continuing trend.

THE ME HALF OF THE EQUATION

Oh boy, this guy. Was getting this guy a fun trek. So, he wasn’t ever really announced by Hasbro. News of him instead broke when someone’s Walmart started running the ad showing off the figure on their in-store monitors right around Rogue Friday. Most other stores, including the one closest to me, followed suit shortly thereafter. Of course, while there may have been an ad, there was no sign of the figure anywhere. It was quite surreal, because it’s very rare to see an ad for any action figure these days, and it’s usually for figures that have long since left shelves. Getting the ad for the figure months before we see even a production sample? That’s weird. With no indication of when the figure would be showing up, I ended up stopping in at the closest Walmart rather frequently, and getting more and more disappointed with each visit. But, as luck would have it, after almost completely giving up, I stopped once more last week on a whim. I actually almost missed him at first; he’s supposedly hitting in solid cases of just him, but there was only the one left by the time I got there. I’m really glad I finally found him. The Scarif Trooper is my favorite of the new designs, and this is a very well put together figure too!

scariftrooperbs4

#1136: Kanan Jarrus

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

KANAN JARRUS (IN STORMTROOPER DISGUISE)

STAR WARS: ROGUE ONE

kanandisguise1

For my last two entries in Star Wars week, I’ll be moving over to my newest Star Wars obsession, Star Wars: Rebels.  I’ve been steadily making progress through the show (or at least I *was* until Disney XD took the first two seasons off of their site…), and have become familiar enough with the characters that I felt the need to own what I could in action figure form.  Fortunately for me, there’s a nice helping of Rebels figures being mixed in with the Rogue One product, offering me the chance to pick up a few of the main characters.  Today, I’ll be looking at the leader of the show’s band of merry Rebels, Kanan Jarrus!

THE FIGURE ITSELF

kanandisguise2Kanan is part of the first series of Hasbro’s smaller Star Wars: Rogue One line.  He was one of the figures to hit on Rogue Friday, but seems to still be available in decent numbers two months after the fact, which is certainly a good thing.  This is Kanan’s third figure (though his first figure was released quite a few times on its own), and it’s based on his appearance from the Season Two premier, after he steals a Stormtrooper’s armor.  The figure stands about 4 inches tall and has the standard 5 points of articulation.  Kanan has an all-new sculpt; he’s actually a little taller than the basic Rebels Stormtrooper, so I guess Kanan’s a little tall for a Stormtrooper.  I like that he’s close enough to the normal trooper to pass, but different enough that we can easily identify it’s Kanan.  The head sculpt is a fairly decent recreation of Kanan’s design from the show.  It’s not perfect, but it’s close enough, and it certainly appears to be better than the prior versions of him.  The shoulder pauldron is a separate piece (so he can be either a sand trooper or a basic Stormtrooper if you want), which sits a little weird on the body.  His neck is also slightly on the long side in order to compensate for it.  In general, the sculpt is pretty good, though.  The paintwork on Kanan is pretty standard fare for recent Star Wars figures.  Not incredible levels of detailing or anything, but he’s mostly pretty  clean.  He’s better than the basic Rebels trooper I have, so that’s definitely a good thing.  Kanan includes his lightsaber, a blaster pistol, the helmet to match his armor (which fits surprisingly well, especially given his ponytail), and a big ol’ disk-launcher thing.  Because Hasbro, I guess.  He’s actually got one of the better accessory selections from this line, and really for the scale in general.

THE ME HALF OF THE EQUATION

So, after getting into Rebels, I realized what a horrible mistake passing up the two Rebels figures in the first series of Rogue One figures was.  I went back to the Walmart across the street, and they still had both Kanan and Sabine, so I got them.  Thrilling story, right?  Kanan’s a cool figure to be sure, definitely one of the cooler figures from the initial Rogue One assortment.

kanandisguise3

#1120: Baze Malbus & Imperial Stormtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BAZE MALBUS & IMPERIAL STORMTROOPER

STAR WARS: ROGUE ONE (HASBRO)

bazetrooper1

Who wants more Rogue One stuff?  I sure hope the answer is you guys, ‘cause otherwise I’m writing for the wrong audience.  As noted yesterday, in the just over a month since Rogue Friday, a few new products have been slowly hitting, offering us a few new characters from the upcoming movie.  Slowly but surely, we’re getting all of the members of the lead team of Rebels.  Today, I’ll be looking at the latest member of the team, Baze Malbus, alongside an Imperial Stormtrooper.

THE FIGURES THEMSELVES

Baze and the Stormtrooper are part of the second Battle-Packs assortment of the Star Wars: Rogue One line.  There are only two two-packs this time around, and this is the only Rogue One set in this assortment (the other is from Rebels).

BAZE MALBUS

bazetrooper2I don’t really know much about Baze.  His bio on the back of the box reads: “Hardened by the harsh reality of his Imperial-occupied home world, pragmatic soldier Baze Malbus is a crack shot with his heavy repeater cannon who uses his natural bravado during the occupation of Jedha to face off against the Galactic Empire’s deadly, white-armor encased loyalists, the Imperial Stormtroopers.” He also looks a little like a Ghostbuster.  Which I guess is cool, depending on how you feel about Ghostbusters.  The figure stands a little under 4 inches tall and has the same 5 points of articulation as most of the other figures in this line.  His sculpt is all-new, and matches up pretty well with the other figures from the line so far.  It does a decent job of capturing Baze’s look, at least from what we’ve seen so far.  The head sculpt presents a decent likeness of actor Jiang Wen.  It’s not perfect, but it’s pretty close, and it’s very easy to tell who this is supposed to be. Base is ever so slightly preposed, with his arms at a slight bend and his legs sort of mid-strut.  In the case of the legs, this is mostly to offer Baze a bit more balance to offset the big thing attached to his back.  It’s a smart move on Hasbro’s part and makes Baze here a lot easier to stand than he might otherwise be.  I do sort of wish that if they were going to prepose the arm anyway, that they’d just go ahead and sculpt him to hold his weapon two-handed, but he looks alright holding it one-handed, I suppose.  Paint is perhaps the weakest part of Baze.  As with so many Hasbro figures, it’s not that it’s *bad*, but it’s just sort of bland, and also notably thick on the face and hair.  A little subtlety would go a long way, and might make him a little more interesting to look at.  Baze includes his repeater cannon/backpack, which is all one piece, and plugs into his back.  The piece can be removed and swapped with a big missile launcher thing (because Hasbro), which at the very least fits stylistically.

IMPERIAL STORMTROOPER

bazetrooper3Okay, do you remember when I looked at the basic Rogue One Stormtrooper?  Remember how awesome that guy was?  Yeah he was pretty cool.  Well, the good news is, if you like that guy, you’ll like this one, because he’s the same figure with an extra pauldron piece.  The extra piece is actually pretty cool, and thanks to its removable nature, you can use him as either an all-new figure, or just another trooper.  The paintwork is a bit improved this time around.  A few of the details missing from the standard figure have made their way onto this guy, for those that care about that sort of thing.  Also, it’s worth noting that this figure’s white is ever so slightly more yellow in hue than the single-carded figure (due to the single-carded figures being produced in China and the two-packs in Vietnam, thereby using slightly different materials).  He still includes the standard blaster from the single figure, but loses the “exploding” chest piece, which, given the added pauldron, seems forgivable.

THE ME HALF OF THE EQUATION

No particularly exciting story here, I’m afraid.  I found this pair at my new local TRU about two weeks back (at the same time that I got Dr. Strange and Enchantress).  Baze is a pretty fun little addition to the Rogue One team, and I’m certainly happy to have him.  He’s got a fairly unique design.  I loved the basic Stormtrooper from this line, so getting a variation on that so quickly is definitely a plus in my book.  The more Troopers, the better!

bazetrooper5

#1093: Imperial Hovertank Pilot

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

IMPERIAL HOVERTANK PILOT

STAR WARS: THE BLACK SERIES

hovertankpilot1

Well, dear readers, we’ve made it to the end of the Rogue Friday stuff.  I’ve looked at all of the regular release figures that I’ve gotten.  However, I also managed to grab one of the many store-exclusives, that were up for grabs.  This one fits the theme of the last few days, being another Black Series figure. Rogue One is offering us a whole bunch of different specialized Imperial troopers, such as today’s Hovertank Pilot, who follows the precedent set by the TIE fighter pilots, the AT-AT drivers, and even the Biker Scouts, of being a trooper specifically designed to drive a thing.

THE FIGURE ITSELF

hovertankpilot2The Imperial Hovertank Pilot is part of the Star Wars: The Black Series line and is a Toys R Us-exclusive figure.  He was released alongside the latest Black Series set on Rogue Friday, but appears to have shipped in cases of just Hovertank Pilots.  The figure stands about 6 inches tall and has 27 points of articulation.  So far, the figure has a totally unique sculpt, but that’s likely to change, given the closeness of the Pilot and Scarif Trooper designs.  From the looks of things, all of the Pilot’s armor but the helmet and belt is the same as the Scarif Trooper.  The helmet lacks the mouthpiece, sports a much thinner visor, and is wider at the base than the Scarif helmet, and the belt lacks the skirt, in favor of two slightly longer pouches on the frontmost pockets.  I like the design of the Pilot, but, like the Death Trooper, I’m not certain it quite fits the OT-aesthetic.  It’s certainly close (especially on the parts shared with the Scarif Trooper), but something about the helmet looks more First Order than Imperial.  Someone brought up that this figure almost looks like a first order take on the Biker Scout, and I kind of agree.  But, like I said, it’s still a solid design on its own.  The sculpt does a good job translating the design (at least from what we’ve seen of it), and features a nice assortment of smaller detail work.  In particular, I like the texturing on the clothing under the armor.  The shoulders seem a touch wide, but other than that, the proportions feel pretty solid.  The paintwork is actually a good deal better than a lot of Black Series figures.  Not only is the basic application pretty clean, but he’s also got some really great wear and tear on his armored parts, which makes him stand out a bit next to the other spotless Troopers we’ve gotten.  Here’s hoping we get more like him!  The Hovertank Pilot includes a standard Stormtrooper blaster.  Like some of the others in this series, he feels a little light on accessories, but I don’t really know what else you could give him.

THE ME HALF OF THE EQUATION

So, I’m sure no one’s shocked to find out that I got this guy at TRU during their midnight opening event for Rogue Friday.  I actually wasn’t sure I was going to grab him, and I didn’t pick him up on my first pass.  However, when I looped back around to the Black Series figures, he was still there, and I decided to go for it.  I’m glad I did.  After K-2, I’d say this guy’s my favorite of the Rogue Friday stuff.  He’s just a very well put together figure.  I look forward to getting the Scarif Troopers on this body!

Okay, that’s it for the Rogue Friday stuff (well, mostly).  I think this launch was much more successful than the Force Awakens product, and I hope that Hasbro is able to keep it more or less consistent for the Episode VIII launch.  Only time will tell! Tomorrow, I’ll be back to some non-Star Wars figures.

rogueonebs1