#0258: Batgirl & Bane

BATGIRL & BANE

DC MINIMATES

Bane&Batgirl

One of the great tragedies for many Minimates collectors was the cancellation of DC Direct’s DC Minimates after only eight series. Not only did the line present us with definitive versions of many of DC’s top characters, it also gave us some wacky side characters like Ambush Bug and Ma Hunkel, and it was the first Minimate line to push the envelope in terms of sculpting. However, the line was met with its fair share of difficulties, most notably hitting shelves when Minimates were at a low point and being gone just before they hit it big. Still, we got a decent 64 figure run, and that’s certainly better than nothing. Today I’ll be looking at two figures from the Batman side of things, Batgirl and Bane.

THE FIGURES THEMSELVES

Batgirl and Bane were released as part of the fourth series of DC Minimates. They’re an odd pair, seing as the two have never actually met. Heck, they didn’t even exist at the same time! Anyway, they’re both Batman characters, I guess.

BATGIRL

Batgirl is built on the basic Minimate body, so she stands about 2 ½ inches tall and features 14 points of articulation. She’s based on the Barbra Gordon version of the character, in her second costume. She features a sculpted mask, cape, belt and gloves. The cape and gloves were previously used on both the series one and series three Batmen, as well as being used before that in the DC C3 line. The mask and belt are new, so as to properly depict her exposed hair and more elaborate belt design. The paint work is pretty clean on Batgirl, with no real slop, and some very sharp line work on all the transitions. This set was released during the period of time when Minimates were using full slip over masks for everyone, even characters that only had half masks, so Batgirl got a full face mask. Some figures took advantage of this and gave the figure a different facial expression on the unmasked head. Sadly, Batgirl didn’t do this, which is a shame, as it would have the unmasked face be Barbra in full librarian mode. Batgirl includes a pair of bat-cuffs and a spare hair piece to display her unmasked.

BANE

Bane demonstrates one of the unique traits of the DC Minimates line: use of the larger Minimate body. The body features the same articulation and relative proportions, but is about a half an inch taller than the basic body. So, DC used it for larger characters such as Bane here. Bane features three sculpted parts: mask, belt, and wrist gauntlet with tube that plugs into the mask. All of these pieces are new to Bane, mostly due to his use of the larger body. All of the pieces accurately capture Bane’s look from the comics, so kudos to them on that. The paint work is pretty good overall, though there a few issues. The shirt features black detailing with gray highlights, but on the edges of the torso, the gray highlights have been missed, leaving their spots flesh-toned. Also, the sides of the shirt don’t quite line up with the front. Finally, the mask, while well detailed, seems to sit a bit too low, which gives him an abnormally large head. Under the mask, there’s a fully detailed face with hair, which Is a nice touch I suppose, though I hardly see anyone displaying him this way.

THE ME HALF OF THE EQUATION

As with the rest of the DC Minimates line, I purchased these two as soon as they were released. While I think they’re both well done figures, I remember being disappointed in general by the lineup for Series Four, as well as baffled by the choice to pack these two together. It’s a cool set, but it’s hard to tell what audience they were aiming for, as the two figures present appeal to two different sensibilities.

#0257: Private Hudson vs Xenomorph Warrior

PRIVATE WILLIAM HUDSON & XENOMORPH WARRIOR

ALIENS (NECA)

HudsonVsXeno3

It’s no secret to those who follow this site that I think the movie Aliens is one of the greatest movies ever made. As a toy collector, I want toys from just about everything, even bad movies! Heck, I even bought a bunch of the figures from James Cameron’s Avatar, before I came to my senses and sold them all off. So, it stands to reason that I would want all the toys imaginable from the greatest movie of all time, right? Well, that’s where things get tricky. See, there’s been a few toys here and there from the movie over the years, but a lot of them weren’t that great or they were solely focused on the aliens themselves. I don’t watch the movie for the aliens, I watch it for the awesome characters standing up to the aliens!

HudsonVsXenoI was thrilled beyond belief when NECA announced that they were making a line of Aliens figures and the humans would be one of the focuses. So far, we’ve only gotten two of the marines, but Bishop’s on his way in Series Three and NECA’s already confirmed that Riley should be showing up in one of the series after that.

NECA is a slightly smaller toy company, which means there can end up being quite a wait from series to series of a line. So, to keep the momentum going on Aliens, they’ve released three two-packs, scattered between the main releases. The two-packs re-use parts and tend to be re-releases of previously seen characters. Today, I’ll be looking at Private Hudson facing off against a Xenomorph that’s a little worse for wear!

THE FIGURES THEMSELVES

This pair was released as a two-pack outside of the regular Series structure. It’s the third of the two-packs NECA has done for its Aliens line. These two were originally meant to bridge the gap between Series One and Two, but due to delays, they ended up coming out a little ways after Series Two, which actually makes for a nice bridge between Two and Three.

PRIVATE WILLIAM HUDSON

HudsonScreamingThis is Hudson’s second figure in the Aliens line. Both figures so far have depicted Hudson after the initial attack on the alien hive, as denoted by the bandage on his left arm. The Series One version of Hudson depicted him immediately after the attack, but this one depicts him as he appears in the last third of the film, when the aliens are attacking the remaining marine forces. The big difference is that Hudson has his helmet and his game face. He’s ready to fight. Hudson stands about 7 inches tall and features 30 points of articulation. From the neck down, the figure is more or less identical to the Series One release. So, I’ll be focusing on the new head sculpt. The big change is the addition of a helmet, a piece that was woefully from the Series One marines. The helmet is different from the one used on the second Hicks figure. In the movie, Hudson has a cover on his helmet, so I’m glad to see NECA pay attention to this detail. The helmet also sits better on Hudson than it did on Hicks, which makes it look less doofy. That’s definitely a plus. The actual head is pretty decent. The screaming expression makes more sense here than it did on Hicks, as Hudson did tend to be the more reactive of the two. Hudson’s scream here is less a frightened one, and more a “come get some” yell, which is pretty much spot on to Hudson’s look during his last stand. The paint work on this figure is alright. The helmet exhibits the best work, with all of Hudson’s graffiti cleanly applied. The face is a bit messier, with some harsh cuts between his 5 o’clock shadow and the rest of his face, and a fairly messy hairline. It’s not bad overall, but it could be better. Hudson includes a shoulder lamp, a welder, and a pulse rifle, all the same as the regular release.

HudsonComparison Hicks&Hudson

XENOMORPH WARRIOR

XenoShotThis is the sixth version of the basic Xenomorph in the line. Like the last one, this one is another exploration of the “just got shot” look. He stands about 8 inches tall and features 38 points of articulation. The figure is mostly the same sculpt as all the previous Xenomorph figures, which is hardly a bad thing. It’s a great sculpt, so I think NECA should milk it for all it’s worth. The key difference is the addition of blast effects to the figure’s upper torso to simulate the effect of the Xeno being gunned down by one of the marines. It appears that these pieces have just been glued onto the basic body, with no real changes to the underlying structure. The new pieces seem to be sculpted well enough, although the larger one got smashed in the package, which makes it look a little…droopy. You know, one in ten….uhh never mind. The paint is the key part of pretty much every NECA Xeno release. In this case, the Xeno has been given brown highlights, similar to those on the Series One version. They seem to have been applied cleaner, which is a definite plus, but both the Series Two Xeno and the Xeno packed with Screaming Hicks have convinced me that Xenos just look better in blue. Also, the blood spurts on this figure are more dull than the neon greens on the previous shot-up Xeno, which I feel robs the figure of the needed pop.

XenosShot XenoComparison

THE ME HALF OF THE EQUATION

In contrast to the other two-packs NECA released, I fully intended to pick this set up from the moment it was announced. I felt the screaming expression and helmeted look were more key looks for Hudson, and I foolishly believed that the Brown Xeno look was superior. Interestingly, I actually ended up putting off purchasing this one a bit more than the other two. In the end, my opinion about Hudson turned out to be true. I’m going to have a rough time picking which version of the character will be staying on the shelf once more marines arrive, as both are great interpretations of him. The Xeno is a serviceable Xeno variation, I suppose. It’s not as cool as the exploding head version packed with Hicks, and I’m not the biggest fan of the brown, but I suppose it could be worse. All in all, a pretty good set, but not quite as exciting as I’d hoped it would be.

#0256: Captain America

CAPTAIN AMERICA

MARVEL SELECT

CaptainAmerica

Happy Fourth of July everybody! For most of my non-American readers it’s just a day in July, but for those of us in the US, it’s a day in July where we grill stuff and then watch stuff explode! Oh, and something about independence or some such. I think they might have mentioned it once in school, but I wasn’t paying attention.

Anyway, what better way is there to celebrate an American holiday than with the Sentinel of Liberty himself, Captain America!

THE FIGURE ITSELF

Cap was released as one of the first Marvel Select figures offered through the Disney Store, following Disney’s purchase of Marvel. He was released along with an assortment of other Avengers figures, some being re-releases of earlier figures and some being all new. To date, I believe Cap is the only of the figures in that group not to see a release elsewhere, though there’s still time. Cap stands about 7 inches tall and features 25 points of articulation. The figure features a brand new sculpt, which is of…varying quality. For the most part, it’s good. It’s based on artist John Cassidy’s depiction of the character, which is a great starting point. The upper body is all good, with great scale details on his upper torso, and some wonderful detail work in the folds on his sleeves and gloves. The head isn’t perfect, but it’s actually pretty good. Aside from the eyes being a little bit too big, it looks great. The biggest issue with the sculpt is the legs, or more importantly, the hip joints. I’m not sure what they were going for, but they sit too low, and distract from the flow of the sculpt without offering much in the way of articulation. I essence, it’s a total fail. It’s especially disappointing given the great sculpted work and range of articulation elsewhere on the figure. It’s almost like they ran out of time and had to rush to finish. For the most part, the paint work is in line with the better parts of the sculpt. Aside from some slightly off paint on his eyes, the paint looks really great. They’ve even added some nice texturing to bring out all of the sculpt’s little details. Cap includes his mighty shield and a stand based on Cassidy’s cover to Captain America Volume 4 Issue 6, which is a nice touch. My only issue is the way the shield connects to Cap’s arm, which is haphazard at best.

THE ME HALF OF THE EQUATION

After getting bitten pretty seriously by the Marvel Select bug with the Disney Store Exclusive Hawkeye and Black Widow, I came across Captain America at my local Disney Store. He was marked down a few dollars and he looked like a pretty decent version of Cap, so I decided I might as well get him. As fate would have it, he was even more marked down than I thought, so I got him for quite a deal. All in all, he’s probably one of the better basic Captain America figures to see release in the last few years, even with a few minor issues.

CaptainAmericaAlt

#0255: Spider-Man – Spider-Sense

SPIDER-MAN – SPIDER -SENSE

MARVEL 10-INCH

Spider-SenseSpidey

In the 90s, Toybiz was at the height of their popularity with their massive 5-inch scale Marvel line. However, this wasn’t enough for them. Since the figures were sculpted in two-up form, meaning they were sculpted at twice the size, they could easily reproduce the figures in a larger 10-inch scale, thereby doubling their profits! They started out by producing separate lines much in the same manner their 5-inch lines were handled, before ultimately meshing all the lines into one. Today, I’ll be taking a look at one of their variants of Spider-Man.

THE FIGURE ITSELF

Spider-Man was released early in the 10-inch line, prior to the move to a merged series. As such, he was released under the Spider-Man brand. The figure stands about 10 inches tall and features 11 points of articulation. The figure is based on his “spider-sense” look, which is how his spider senses would occasionally be portrayed, most notably in Spider-Man: The Animated Series, which most of these figures took influence from. It was a fairly popular look to do, as it also appeared in the 5-inch line. Interestingly, this figure is not just a larger version of that figure, or even just a simple repaint of the basic Spider-Man. He looks to share his head and legs with the basic Spider-Man, but the Torso and arms appear to be all new. This appears to have been done to allow use of the figure’s suction cup feature, which allows you to simulate Spidey’s wall crawling abilities by sticking him to windows and stuff. However, the weight of the figure prevents him from staying in place for very long. The figure seems lankier than some of the other Spider-Men of the time, which is actually nice to see. The paint work is pretty good, if a bit basic. There don’t appear to be any issues with sloppiness and there isn’t really any chance for bleed over. You’ll notice that my figure has taken a bit of wear and tear. The figure included no accessories to my knowledge.

THE ME HALF OF THE EQUATION

As far as I recall, Spider-Man was a gift to me from one of my parents’ friends. I don’t remember the exact circumstances, but it was probably for my birthday or something. I believe it was one of the earlier 10-inch figures I received, and it was certainly the first Spider-Man. It’s a fun little figure, though not one I would seek out on my own. At the time, however, I was just happy to be getting more action figures!

#0254: Cyclops

CYCLOPS

S-WORLD MINIFIGURES

Cyclops1Lego

Okay, one last look into the dark back alley of toy collecting that is bootleg toys! I’ve looked at Black Lantern and Captain America, now I move on to the franchise that actually introduced me to the world of bootlegs, X-Men! See, back in the 90s, I so loved X-Men figures that I actually ended up with at least one knock off, but that’s a story for another review. Today, let’s take a look at Cyclops.

THE FIGURE ITSELF

Cyclops is yet another Bootlego from the very generically named “S-World Minifigures” line. As with Cap, I haven’t been able to tie him to any particular set. Cyclops is about 2 inches tall and has 7 points of articulation. He’s on the same Bootlego body seen before, which is an impressive mock of the original. He looks to be based on Cyclops’s 90s look, which is also the main look he sports in the Lego Marvel video game. His one add-on piece is a hairpiece, which is the same as the one used on Black Lantern, which is in turn a copy of one of Lego’s basic hairpieces. Cyclops’s paint is perhaps the least impressive of the three bootlegs I picked up, but it’s still surprisingly good for a bootleg. The only real issue is that the yellow used is a bit too thinly applied, which allows the colors under it to bleed through. Cyclops is accessorized with two Lego antennae cast in translucent red plastic and a black display stand. I assume that the antennae are meant to simulate Cyclops’s optic blasts, but they just end up looking goofy. Also, the stand is notably not the new piece seen on the other two, but rather a copy of Lego’s own minifigure stand.

THE ME HALF OF THE EQUATION

Like the previous two Bootlegos, Cyclops was purchased from a dealer at Mego Meet, prior to my knowledge of their sketchy nature. I’m actually quite fascinated by how close to the real thing all three of these were. I’m also impressed by the fact that these have such a large selection of lesser characters and looks. Obviously someone involved with S-World Minifigures is a comics fan who wanted more characters.

Cyclops2Lego

#0027 – Supplemental: Give Me A Break….

STRIKER EUREKA

PACIFIC RIM

Striker2.0

Wait a second… haven’t I done this review before? Why yes, yes I have. Here’s the deal: I’ve got a story to tell about a somewhat common issue that plagues action figure collectors.  And that issue is BREAKAGE!

Toys generally are made out of plastics, and one of the important things to remember about plastic is that it isn’t indestructible. Plastic can suffer from some serious wear and tear. Depending on the type of plastic used for a figure, breakage can be a rareity or an inevitability. Most importantly, as figures become more and more detailed, and gain more and more articulation, they are more and more likely to break.

I am no stranger to toys breaking. When you own well over 2000 action figures, you tend to get really familiar with the idea that they aren’t always built to last. When I was a kid, my dad had a box on his desk where I could place my broken action figures. Every month or so, he’d sit down with a tube of apoxy and repair them to the best of his ability. For the most part, it was simple stuff. Arm joints broke. A head might fall off. Easy fixes. But, as the toys got more and more complex, they became more difficult to fix. My first real experience with an un-fixable toy came when I was about 12 years old. I had just gotten the Marvel Legends Series 9 Nightcrawler. I was so thrilled! But, not long after opening him, I was showing him to my dad and I dropped him. It wasn’t a big fall, maybe 3 or 4 feet. Regardless, his head came clean off. Due to the nature of the neck joint, there was no fixing him. He was broken, what could you do. Not too long after, my Dad felt bad about it, so he bought me another one. He was a $7 figure, so it’s not too much of a loss, but it still sucks.

StrikerComparisonSo, where does Striker Eureka come into this? Well, Striker is a really cool figure, but he’s also a master of the “Shelf Dive” where a figure takes a tumble off of the shelf they’re being displayed on. Striker did this a few times to no ill effect, but one day, I picked up Striker to take some photos with Cherno Alpha, and off came his leg, right at the hip. I closely looked at the brake and noticed that the hip’s swivel joint had split in two. All the pieces were still there, so I figured I could probably fix him without any frozen joints. It took me a few hours of careful work, but I got him put back together. And back on the shelf he went. For, a few months, he sat there, no issues. Then a couple weeks ago, I was doing some cleaning before a few friends came over, and down he came again. I picked him up like I had lots of times before, and went to put him on the shelf. Then, I noticed his arm was missing. Yep, it was lying on the floor. I looked at it and quickly diagnosed it was a lost cause. The weight of the arm and the small size of the broken peg meant there was no way to fix him. Since Striker’s a fairly popular figure who comfortably sells for north of $60, I wasn’t going to rush out to get a new one. So, Striker sat armless on my desk for the past few weeks.

Yesterday afternoon, I was walking through my local Toys R Us, and I came across another Striker, sitting on the shelf alone. So, I picked him up, happy to find a replacement at the retail price. I guess things worked out, huh? Sure, having a non-broken Striker means he effectively cost twice as much as the other figures in the line, but I guess it could be worse. Regardless, I’ll definitely be more careful with this one!

If you’d like to read my actual review of the Striker Eureka figure, go check it out here!

#0253: Captain America – Rescue Version

CAPTAIN AMERICA – RESCUE VERSION

S-WORLD MINIFIGURES

CapRescue

Today continues my first real look into the seedy underbelly of toys: Bootlegs! Yesterday, I took a look at Black Lantern Hal Jordan, who provided me a chance to acquire one of my favorite characters, albeit in a slightly less default look, in the Lego style. Today, I’ll be jumping over to the Marvel side, with a one of my favorite non-default looks of a character.

THE FIGURE ITSELF

Captain America is just as much a bootleg as yesterday’s Black Lantern, which means he’s not officially tied to any series, outside of the vague “S-World Minfigures” printed on his display stand. Unlike Hal, I haven’t even been able to tie this one to a larger set. He’s just here. Cap stands about 2 inches tall and has 7 points of articulation. He’s built on the bootlego body, which is a near perfect replica of the real Lego body. The figure is based on Cap’s “Rescue” look from Captain America: The First Avenger, which is a look I quite like. He features one add-on, a helmet, which seems to be a bootleg of the piece used on Lego’s green army men from Toy Story. The figure’s paint is once again impressive for such a back alley figure. The eyes are perhaps a bit soulless, and the helmet has been incorrectly adorned with a star instead of the proper A, but otherwise, everything looks pretty great. The figure is accessorized with a shield (based on his pre-circular one), a machine gun and a display stand.

THE ME HALF OF THE EQUATION

As with Black Lantern, I picked Cap up from a dealer at Mego Meet, before fully knowing the details of his creation. Cap is actually still more of a mystery to me than the other two I picked up, as I have yet to find any evidence of other people having this one. Nevertheless, I’m a big fan of this particular design for the character, and I was thrilled to be able to acquire in yet another style, even if he is less than official.