Monthly Archives: March 2017

#1229: Bane – Detective Mode

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

BANE – DETECTIVE MODE

DC COMICS MULTIVERSE (MATTEL)

banedetvis1

Hey look, another DC Comics Multiverse figure.  These figures are always sooooooooooo great, right?  While the line switched over to the 6-inch scale last year, there are still quite a few entries from its earlier, 3 3/4-inch scale, based primarily on Arkham Origins and Arkham Knight.  I watched my brother play through Knight, so I’m familiar with that one, but I don’t really know Origins all that well.  Amusingly enough, I actually own more Origins merch than any of the other games.  There were just a lot of toys from that one, I guess.  Anyway, I’ll be looking at one of the smaller Origins figures, Bane.  Of course, it’s not a basic Bane.  No, no, this is a wacky variant Bane.  Let’s do this.

THE FIGURE ITSELF

banedetvis2Detective Mode Bane was released in Mattel’s small-scale DC Comics Multiverse line.  I couldn’t begin to tell you what series.  I didn’t follow the line super closely, and from what I can tell online, no one else did either.  The back of his box shows Arkham Knight, Arkham Origin Joker, and some sort of Batman derivation.  I’m guessing he hit around the time of Arkham Knight’s release?  The figure stands a little over four inches tall and he has 16 points of articulation.  He’s built on the same mold as the standard Arkham Origin Bane figure.  It’s okay, I guess.  Not the worst thing Mattel’s put out.  I guess he sort of looks like Bane from the game.  It’s hardly the most exciting Bane look, and the figure suffers from the same clumsy articulation issues that plagued pretty much this entire line.  The paint’s what makes this figure “unique.”  As his name denotes, he’s based on how Bane looks when he’s viewed by the player using Batman’s Detective Vision in the game.  In the game, this means the foes are seen through an x-ray filter, showing off their skeletons and what not.  For the figure, it means he’s molded in clear blue plastic, with a skeleton pattern hastily painted on the front of the figure.  He ends up looking like one of the Skeleton Men from Scooby Doo, Where Are You?.  I don’t think that was quite what they were going for, but that’s what they got.  An x-ray figure is really the sort of thing you have to fully commit to, not just a quick repaint  (for instance, every “Emperor’s Wrath” Darth Vader has at the very least an actual skull imbedded in the middle of his helmet), so this ends up looking more like a guy wearing goofy makeup than anything else.  Bane included no accessories, because why offer anything new with this figure, right?

THE ME HALF OF THE EQUATION

Like the Knightfall Batman I reviewed two weeks ago, this guy was another figure given to me by my Super Awesome Girlfriend, picked up during one of her stress buys.  The fact that he was a gift from her is probably the best that can be said about him.  I mean, I’ve still owned worse figures, but this one’s not offering a whole lot of positives.  The gimmick is cool in theory, but as usual, Mattel was lazy about it, and that makes him kind of a pointless figure.  I can’t really imagine what the market for this figure is supposed to be.  People who like failed concepts?

Flashback Friday Figure Addendum #0006: Ultron

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , , , , ,

0040

Alright, it’s time for another Flashback Friday Figure Addendum!  Today’s figure is another Toy Biz Marvel entry, though this one’s from a bit later in the reviews.  Let’s have a second look at Avengers: United They Stand’s Ultron!

Ah, yes, Avengers: United They Stand.  Poor A:UTS. it gets a lot of hate and I’m not certain it deserves it.  Perhaps it wasn’t the greatest depiction of the Avengers to grace the small screen(That honor goes to the more recent Earth’s Mightiest Heroes), but I didn’t think it was all that bad.  The designs and animation may be late 90s over complication at its finest, but I thought the characterization was actually nicely done, and I loved the fact that the focus was on the slightly lesser known Avengers instead of Cap, Iron Man, and Thor.  One of my other favorite things was the tie-in toyline, which is what I’ll look at today.  In particular, the toy counterpart of the shows recurring antagonist: Ultron!  This isn’t the first time Ultron’s been mentioned on this blog.  I previously mentioned him in passing in my Vision review, where I mentioned Ultron was the creator of Vision.  Ultron himself was the creation of Avengers founding member Hank Pym, aka Ant-Man, aka Giant-Man, aka Goliath, aka Yellow Jacket, aka Wasp, aka Dude with serious identity issues!  Ultron rebelled on his creator and became a powerful Avengers foe.  He’s also set to be the villain in the upcoming Avengers sequel.

THE FIGURE ITSELF

Ultron was released as part of the first wave of Toy Biz’s Avengers:United They Stand tie-in line.  Ultron had several different looks over the course of the show, but this one seems to be a bit of an amalgam of the various looks, with the largest portion of influence coming from his appearance in the show’s first two episodes.   He stands just over 5 inches tall, and features 11 points of articulation (13 if you count the moving knee-pads).  Ultron is a completely new sculpt.  It’s well done, and quite detailed, especially for its time of release.  In particular, the head really captures the look of the character.  The paint is pretty well done, being mostly all one color; a nice bluish silver.  There’s a wash over the whole figure to help bring out the details.  The figure also features a light-up feature.  By pressing the button on Ultron’s waist, you could make the figure’s eyes and mouth light up.  It’s a neat feature that helps to further simulate the look of the character from the show and comics.  At one point, Ultron had a large cannon that hooked onto his right arm, but I’ve since lost that piece.

THE ME HALF OF THE EQUATION

My dad bought Ultron for me when he was initially released.  We happened to stop at a Toys R Us and there he was.  He was one of the last figures I acquired from the line.  It wasn’t because I didn’t want one, but because the A:UTS figures were quite difficult to find initially, so I kind of got them when I saw them.  Growing up, he was the closest thing I had to a classic Ultron.  Because of that, I have quite the soft spot for him.

Okay, now we’re getting somewhere!  This review is from my second month writing reviews, and you can start to see some of the regular review features coming into play.  Height, articulation and paint are all actually addressed this time.  And I even made it past 500 words!  Granted, most of it was the intro, but still.  Also, this is my first Flashback to a post-random review period. Cool.  Cool cool cool.

My actual review was pretty on point for this guy.  The only thing missing was his big ol’ arm cannon, which was amongst the many items excavated during The Find.  It’s goofy, but also manages to match pretty well with the rest of the figure stylistically, and, amazingly, it doesn’t impede his movement when attached (of course, the shoulder’s still a bit restricted thanks to the wiring that allows it to light up).  Also, I neglected to mention in my original review that Ultra’s sculpt, was an early product of the fine folks at Art Asylum, who would later launch one of the best Trek lines ever put into plastic, as well as creating my favorite brand of all time, Minimates.

I’ve actually got a story about this one! As a kid, I lost this figure around Christmas time and couldn’t locate him for a whole year.  Come the next Christmas, I put on my robe I wore one a year on Christmas morning and found this guy in the pocket.  Seems I’d stowed him there for safekeeping the prior year and total forgotten.  To date, this figure remains my favorite figure of Ultron, so I’m happy he wasn’t missing for too long!

#1228: Squirrel Girl & Jet-Pack Spider-Man

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SQUIRREL GIRL & JET-PACK SPIDER-MAN

MARVEL MINIMATES

spideysquirrelgirl1

Squirrel Girl?  They made a Squirrel Girl?  Like, for real?  That’s awesome!  Now, for those of you wondering “who’s Squirrel Girl?,” let me ‘splain: Squirrel Girl is a minor character from the ‘90s, created by Will Murray and Spider-Man co-creator Steve Ditko.  In her very first appearance, she teamed up with Iron Man to defeat Dr. Doom.  Defeating Doom gave her something of a jokingly legendary status in the comics, and over the years, there was a running gag where she would reference beating some other infamous foe off-screen.  She was eventually added to the Great Lakes Avengers during Dan Slott’s mini-series in the mid-00s, which kind of cemented her status as a fan-favorite.  Since then, she’s bobbed around in the background of the Marvel universe, before eventually picking up her own series in 2014.  More recently, she’s cropped up in the Ultimate Spider-Man cartoon, which has netted her a Minimate, half the subject of today’s review!

THE FIGURES THEMSELVES

Squirrel Girl and Jet-Pack Spider-Man are part of Series 3 of Walgreens’ exclusive line of Marvel Minimates.  Due to the slightly odd numbering scheme of the Walgreens assortments, this actually makes it the fifth series released, but whatever.  Squirrel Girl was granted her spot in this set thanks to an online fan poll, of which she and Man-Thing were the winners.  Spider-Man was granted his spot because he’s Spider-Man.  He does what he wants.  Both figures in this set are based on their appearances in the Ultimate Spider-Man cartoon.

SQUIRREL GIRL

spideysquirrelgirl2This marks not only Squirrel Girl’s debut as a Minimate,  but also as an action figure in general.  As noted above, the figure is based on her animated design, which is itself a pretty straight adaptation of her comic design from GLA until around the time of her solo series.  It’s a pretty classic look, following all of the various comic book super hero conventions.  The figure is built on the standard Minimate body, with add-ons for her hair and her belt/tail.  Both add-on pieces look to be new to this particular figure, and they suit the character pretty well.  Some characters look a little lacking on the animated-style ‘mates, but I think Squirrel Girl is one of those that actually fits with the style a bit more.  It helps that her paintwork is really sharp.  The colors are remarkably vibrant for just being grey and brown, and all of the detail lines are really crisp.  She’s sporting a somewhat goofy grin, which is really the only expression a Squirrel Girl figure should ever have.  I also appreciate the shading, especially on the torso, which helps keep her from looking too blocky (I mean, yeah, she’s a block figure, but still…).  She’s missing a few of the seams on her arms and legs, but those are minor enough details that I don’t feel it really holds the figure back.  I’d chalk it up to simplifying the design for translation to the ‘mate aesthetic.  Squirrel Girl is packed with her three squirrels (Monkey Joe, Tippy Toe, and Mr. Lieberman.  Monkey Joe and Tippy Toe are from the comics, but it looks like Mr. Lieberman was added to bring the total up to three, for whatever reason), as well as a pair of burritos (apparently from an episode of the show), and a clear display stand.  The stand is more essential here than usual, thanks to the tail making it virtually impossible to keep her standing on her own. 

JET-PACK SPIDER-MAN

spideysquirrelgirl3So far, every Ultimate Spider-Man pack has has its requisite Spider-variant, and this set’s no exception.  You can sort of see them starting to reach with this one.  He’s pretty much just a basic Spider-Man, but with an extra accessory.  I suppose there have been worse variants.  The figure is built on the standard body, with the addition of the aforementioned jet-pack, which is an add-on piece.  The actual pack is the same one used for both Hope Summers and the Age of Ultron Nick Fury, but the straps are new to this particular figure.  I liked the jet-pack the first time I reviewed it, and it’s still pretty cool here, and the new straps actually make it nicely versatile.  The rest of the details are handled via paint, which is pretty decent overall.  He’s still exhibiting the slight bleed through issue on his eyes, which has been present on most of the recent Spider-Men.  That’s a bit annoying, but it’s less present here than on some of the other examples.  The rest of the paint is pretty clean, and replicates the look from the show, so I guess that’s pretty good.  Spider-Man was packed with a blast-off base that plugs into the jet-pack, a thumbs up hand (re-used from Buddy Christ), an extra surprised head, and a clear display stand.

THE ME HALF OF THE EQUATION

I’ve not had much luck finding these sets at any of the local Walgreens, so I had to call on the help of my family to track them down for me.  My dad ended up finding this set for me a few weeks ago, which was very nice of him.  The Spider-Man I can kind of take or leave, but I’m really enthused to have a Squirrel Girl finally.  She’s definitely worth the cost of the set!

#1227: Red Space Ranger

Posted by Ethan Wilson in Reviews and tagged with , , , ,

RED SPACE RANGER

POWER RANGERS: LEGACY (BANDAI)

redspacerangerlegacy1

When most people think “Power Rangers,” they think of the Mighty Morphin’ incarnation, which launched the show.  That’s pretty fair, as it’s by far the most distinctive, and represents the franchise at its highest point in terms of popularity.  I was born in ’92, so, while I still remember a little of Mighty Morphin’s original run, it’s not what I consider *my* Power Rangers.  That would be the show’s fourth incarnation, Power Rangers In Space, which is actually pretty well-regarded in the community, and is widely considered the season that saved the show, following the less than stellar performance of Turbo.  Unfortunately, nowadays, there’s very little product for any Power Rangers that aren’t either the current incarnation or the Mighty Morphin’ Rangers, meaning I’m mostly reliant on my old figures from the show’s original run.  I’d love some Figuarts, but those are little more than a dream.  Lucky for me, Bandai America is offering the next best thing, courtesy of their Legacy line.  I picked up Andros, the Red Space Ranger, which I’ll be looking at today.

THE FIGURE ITSELF

redspacerangerlegacy2The Red Ranger is part of the second series of Power Rangers: Legacy.  He’s one of the two In Space Rangers included in this set, with the other three figures hailing from Mighty Morphin’ (the  rest of the main In Space Rangers are in Series 3, and the Silver Ranger is as of yet unannounced).  Though the line has been touted as being about 6-inch scale and the figures are clearly designed to mimic Hasbro’s Marvel Legends, the Red Ranger stands 7 inches tall, placing these figures more in scale with the Masters of the Universe Classics or something from NECA.  There’s no commingling with the Figuarts Rangers, that’s for sure.  The figure sports 36 points of articulation, which is certainly an impressive count.  The movement on the joints isn’t terrible, but there are some slight oddities on a few of the joints, which means it can take a fair bit of careful posing to make sure he doesn’t look a little mangled.  Still, it’s a pretty major step-up from the last Banda America Ranger I looked at.  In terms of sculpt, the US Rangers figures have always skewed the proportions a bit more to the side of super-heroic.  This guy does some of that, but reigns it in a bit, resulting in a final product that is somewhere between the old figures and the actors in the suits.  I don’t mind the look, and it’s consistent with all the others from the line so far.  The sculpt is of varying quality.  The helmet is by far the best work on the figure, and it’s a pretty much pitch-perfect recreation of the helmet from the show.  The redspacerangerlegacy4body is decent, but the articulation sticks out more than a little bit, especially on the hips and shoulders.  The shoulders in particular feel like they’re set too far out from the torso, as if they got the length of the pegs off or something.  Also, it would appear that the forearms have been reversed, which makes them look rather strange.  By and large, he’s pretty solid, but there’s still some of that Bandai America flavor of “why would you do this?”  In terms of paint, the Red Ranger is pretty straight forward.  Everything is pretty basic color work; all the lines are nice and crisp and the colors are pretty much on point.  For extras, Andros includes his trusty Galaxy Blaster, as well as the torso and head of the In Space Megazord.  Bandai’s doing something slightly different with these figures and only packing corresponding Zord pieces with each Ranger (i.e. the Mighty Morphin’ Zord is only packed with those Rangers and so forth), meaning each Zord is spread over a minimum of two series. Time will tell how this works out for them, but the fandom seems rather split.

THE ME HALF OF THE EQUATION

I caught the first series of this line several times, but I don’t really have any attachment to Ninja Storm and I’ve already invested in the Figuarts versions of the original team, so I passed.  As soon as I learned the In Space figures would be part of the Series 2 line-up, I started looking out for this guy.  He seems to have been the hottest figure in the set, at least initially.  I finally tracked him down at my closest Toys R Us, back in January.  Ultimately, the figure’s okay.  I can’t say he’s fantastic, but he’s better than the usual Bandai America product.  I’m holding out to hear if there’s going to be a Silver Ranger before committing to the rest of the In Space team, but I can see myself picking up the occasional figure from this line (especially the Series 4 Gold Ranger).  If you don’t have the Figuarts stuff, I’d definitely recommend checking this line out.  I think lack of comparison may do these guys some favors.

redspacerangerlegacy3

#1226: Wonder Woman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

WONDER WOMAN

DC SUPER POWERS (KENNER)

wonderwomansp1

No matter how great they may be, pretty much every DC Comics toyline from now until the end of time will always be measured to the standard set by one of the earliest DC lines out there, Kenner’s DC Super Powers.  There’s something about the line that just made for the perfect mix of fun, character, and faithfulness to the comics.  Sure, not every figure in the line was top-grade, but it gave us some of the greatest plastic versions of all of the mainstay members of the Justice League of America.  Perhaps the one major drawback of the line was its notable lack of female characters.  In a line of 34, only one of them was female (though, designs discovered in 2004 show that there were another two planned, had the line continued).  That figure was Wonder Woman, and it’s the figure I’m looking at today!

THE FIGURE ITSELF

wonderwomansp2Wonder Woman was released in Series 1 of DC Super Powers.  She was based on Wonder Woman’s then-current Bronze Age era look, as seen in the 1982 DC Style Guide.  The figure stands about 4 1/2 inches tall and has 7 points of articulation (although her hair restricts most of the movement on the neck joint).  Super Powers is notable in that every figure in the line had their own unique sculpt (which wouldn’t have been the case had the line continued).  Wonder Woman’s sculpt is pretty good, especially for the time.  She’s not as rail-thin as she tended to be portrayed in the comics and Super Friends, but that’s actually not totally out of place for the line, which gave more realistic proportions to most of the figures.  She’s definitely a good depiction of what someone with Diana’s powers should look like, all things considered.   Her costume captures all of the important elements from the comics and while she’s still sporting heels, they look to be a slightly more sensible design than those seen on a lot of female action figures (and she can actually stand!  Hooray!).  There are some slight issues that crop up due to assembly, with the lines on her thighs being one of the more standout issues.  That being said, they actually don’t look quite as bad in person as they do in the photos; you won’t really notice them.  Diana’s paint work is nice, clean, and bright, all the things it should be.  There’s a bit of slop here and there, particularly around the edges of the white parts of the boots.  That being said, the stars on her shorts are impeccably detailed, and done with an amazing consistency, which you likely wouldn’t see these days.  Wonder Woman was originally packed with her lasso of truth, which was really just a bit of golden thread, and easy to lose, so mine didn’t have it when I got her.  Like every Super Powers figure, Wonder Woman has a special “power” of her own.  Her’s is actually one of the more cleaver ones: when you squeeze her legs, both arms raise and cross in front of her face, replicating her oft used maneuver of deflecting bullets with her bracelets.

THE ME HALF OF THE EQUATION

Wonder Woman comes from right around the mid-point of my Super Powers collecting.  At that point,  it was pretty much an assumed thing that I’d get a pair of Super Powers figures every year for Christmas from my parents.  I’d gotten Green Lantern the year before, so I knew I wanted a Green Arrow to go with him.  As it turns out, the most economical way of getting me GA was to buy me a big lot of figures, which ended up giving my collection quite the jumpstart.  Wonder Woman was amongst those figures, and I have to say, she’s one of those figures that you have to see in person to truly appreciate.  She’s the figure that set the standard for female action figures, and rightfully so.  As someone who started collecting in the ‘90s, a female figure like this was a serious breath of fresh air as a kid, and she remains my favorite Wonder Woman figure to date.