Yearly Archives: 2018

#1844: Buffy Summers

Posted by Ethan Wilson in Reviews and tagged with , , ,

BUFFY SUMMERS

BUFFY THE VAMPIRE SLAYER PALZ (PALISADES)

It’s always somewhat fascinating to peer back at the failed toylines of yesteryear.  Perhaps none are more fascinating than those produced by fan-favorite Palisades, a company that made a huge smash in the toy collecting world before succumbing to financial troubles, and a few questionable business strategies.  At the height of the block figure craze, they introduced their own line, PALZ.  Perhaps the most expansive line of PALZ produced were the Buffy The Vampire Slayer PALZ.  I’ll be looking at one of the variants of the main character today.

THE FIGURE ITSELF

Buffy was released in Series 2 of the Buffy PALZ line.  Each series of the line was based on a season of the show, so this is a Season 2 Buffy.  She’s specifically based on the episodes “Surprise” and “Innocence,” two rather pivotal episodes that deal with the fallout of Angel’s loss of soul.  The figure stands 3 inches tall and she has 14 points of articulation.  As with the three prior PALZ figures I’ve looked at, this Buffy is built on the basic female body (Four figures in and I still haven’t actually reviewed the male body; that’s kind of amusing), or should I say “bodies,” since Buffy’s got two them.  The one she comes wearing is based on her “Innocence” appearance, and it’s pretty straight forward as far as Buffy looks go.  She’s got an extra light jacket piece, which I don’t recall getting any other use, as well as a hair piece with her hair more pulled back, which I believe was another unique piece.  Both pieces replicate Buffy’s look from he episode pretty well.  PALZ were known for their plethora of swappable pieces, but Buffy doesn’t so much swap pieces as she does come with a second figure.  Her second look is based on “Surprise” and requires only the swapping over of her head, hands, and feet to complete it.  She gets another hair piece as well as a slightly heavier jacket piece, both re-used from the previously reviewed Vampire Buffy.  Again, they match the show appearance pretty closely, though this look’s a bit less distinctively Buffy than the other one.  The paintwork on both bodies is pretty solid, though not terribly involved.  The “Innocence” look ends up with the most interesting work, with the pattern of her shirt and her necklace being handled nicely.  There are two different faces to choose from on the head.  They aren’t as divergent as some of the faces were, but offer up a happier/angrier selection, which complements the chosen attire well.  In addition to the whole extra body, Buffy is also packed with the rocket launcher she uses to dispatch the Judge, as well as the torso of his aforementioned Judge-iness, which is perhaps one of the most clever Build-A-Figure ideas ever.

THE ME HALF OF THE EQUATION

Buffy, along with Drusilla from the same assortment, is my first introduction to PALZ.  I came across the two of them at Baltimore Comic-Con and they were fairly cheap, so I figured I’d give them a shot.  I was fortunate in getting what I feel is the best version of Buffy right off the bat, and it was because of how cool this figure was that I ended up tracking down an almost complete set of the line.

The Blaster In Question #0070: Hades XVIII-6000

Posted by Tim Marron in Nerf Reviews and tagged with , , , , ,

BlasterInQuestion1

HADES XVIII-6000

RIVAL (PHANTOM CORPS)

Sometimes you don’t need to make something entirely new to end up with something really good.  Sometimes you just need to take something promising, and tweak it just a bit, then double its capacity and add a shoulder stock.  And presto, its as easy as that.  At least, it is if you’re Nerf, because that’s exactly what they did to bring us this week’s blaster, the Hades.  Just imaging James Woods is reading this review to you.  

THE BLASTER ITSELF

The Hades XVIII-6000 was launched in 2018 as the main spring-powered blaster in the Rival line’s fall quarter releases.  It features a hefty 60 round capacity tacked on to pretty much the exact same system as the Artemis XVII-3000, which used a pump action, rotating barrel mechanism to continuously feed rounds into the chamber.  With the integral magazines laying parallel to the blaster body, it’s a very streamlined layout that yields a high capacity for the size.  The Hades’ shell seems to be all original even with its similarities to the Artemis.  Thinking the Artemis might be better suited to the name Persephone, personally.  As mentioned before, the Hades has double the capacity of the Artemis and actually has a shoulder stock, making it more of a rifle.  Like the Artemis, the Hades’ pump grip is kid of an odd shape, in my opinion.  It’s not really shaped to the human hand, it’s just sort of there.  That’s really my only complaint with any weight behind it, anything else from here on out is really just nitpicks.  For instance, While I’m happy about the inclusion of a shoulder stock, I think the pistol grip is a little too far back as it makes the respective distances from off hand, to shooting hand, to shoulder a little wonky.  I think it would be as simple as moving the pistol grip forward just a couple inches to make it really nice, but I acknowledge its a highly subjective opinion to have, so not everyone will experience the same thing.  Additionally, I’m a little bummed that Nerf has gotten into the habit of leaving iron sights off of Rival blasters for a while now.  Sure you can use the red dot sight they make, and even such, sights don’t really help on a Nerf blaster, but I really enjoy when they are there.  As you’d expect from a Rival blaster of this size, the Hades hits pretty hard.  Pair that with the capability of slam-fire and you’d better be really sure your younger sibling deserved it before you bust into their room and start blasting away.  I believe the Geneva Convention lists an unprovoked attack from the Hades as a declaration of war, so keep that in mind.  If you do take that route and need to rearm, you reload the Hades by sliding the top cover all the way back to the stock and loading rounds into the ports on the top sides of the magazine tubes.  The Hades comes packaged with 60 Rival rounds in standard yellow, as well as blue and red team indicator flags.

THE ME HALF OF THE EQUATION 

A common misconception that a lot of people have about Hades is that he wasn’t really a villain.   He was just kinda grumpy and could be a little frightening due to the nature of his job.  And I’d say that’s an apt description of this blaster.  It’s a really good blaster, like, you should go buy one.  It just depends which side of it you find yourself on that determines how frightening it is.  I guess I didn’t really write this to sound like James Woods very much, just replace some of the verbs with “schmooze” and I think that should do it.

#1843: Lak Sivark

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LAK SIVRAK

STAR WARS: POWER OF THE FORCE II (KENNER)

“The Shistavanen Wolfman, expert hunter, tracker and Imperial world scout meets the mysterious Rebel Florn Iamproid, Dice Ibegon. The two would eventually become Rebel Warriors and fight in the Battle of Hoth.”

When looking to fill the Mos Eisly Cantina with an assortment of visually interesting creatures, the effects team initially set out creating all sorts of new and unique creatures, the likes of Panda Baba, Momaw Nadon, and even Greedo.  But, sometimes you don’t have time to make an expensive and unique costume, so you just have to make due with an off-the-shelf wolf man costume.  Thus began the life of Lak Sivrak, the cantina patron that George Lucas hates, precisely because he’s just an off-the-shelf wolf man.  For the 1997 special edition, Lak found himself replaced all together, with a totally new alien, but that didn’t stop him from getting an action figure as a consolation prize.

THE FIGURE ITSELF

Lak Sivrak was released in the 1998 assortment of Power of the Force II figures.  The figure stands 3 1/2 inches tall (because of the slouch) and has 6 points of articulation (unaffected by the slouch).  Have I mentioned the slouch?  It figures somewhat prominently into this guy’s sculpt, which was brand-new at the time, and has remained unique to him.  It’s a pretty decent offering.  As an alien, he’s not held back by this biggest issues that plagued Power of the Force, being far less stylized looking that his compatriots.  Sure, he’s still quite stylized, but he looks less so, and that’s really the important thing, right?  The aforementioned hunch falls in line with the typical pre-posing of these figures, but when it’s applied to a wolf man creature, it’s certainly less noticeable than it would be on the likes of Han or Luke.  Maybe that’s just how he stands all the time.  We don’t know, we’ve only seen him that one time, and he was sitting down.  Weird wolf man posture canon confirmed.  You heard it hear first, guys.  Lak’s paintwork is pretty standard faire.  It’s clean, it matches well with the source material, and there’s enough small detail and accent work to keep him from looking too bland, so I think we can call that a win.  Lak is packed with a blaster pistol, a “vibro-blade” (whatever the heck that is), and one of the freeze frame slides, offering up proof that, yes, this guy really was in the movie.

THE ME HALF OF THE EQUATION

Lak is yet another more recent addition to my collection, though recent is becoming increasingly relative in these reviews.  I picked him up from one of Lost in Time’s sidewalk sales back during the spring, alongside a whole slew of other figures.  He’s nice enough, and has the virtue of being something of a talking point, due to his disappearance during the special editions.  And hey, if nothing else, he’s a pretty sweet Wolf Man figure, right?

#1842: Snake Eyes

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SNAKE EYES

G.I. JOE: 25TH ANNIVERSARY

“SNAKE EYES is proficient in 12 different unarmed fighting systems (Karate, Kung-Fu, Jujitsu) and is highly skilled in the use of edged weapons. Has received extensive training in mountaineering, underwater demolitions, jungle, desert and arctic survival, and some form of holistic medicine. Qualified Expert: All NATO and Warsaw Pact small arms.”

In 2007, Hasbro was in something of a dry patch.  Marvel Legends was all but dead, the Star Wars franchise was slowly dragging along waiting for Disney to buy it, and their in-house G.I. Joe’s re-branding as “Sigma 6” didn’t pan out quite as they’d hoped.  But, with the looming quarter-century anniversary of G.I. Joe’s A Real American Hero incarnation, they were hoping to at least have a modest, 25 figure celebration.  Little did they know that they’d inadvertently revive the brand for another five years of resounding success.  Yes, the 25th Anniversary line was the breath of fresh air that G.I. Joe needed.  Ironic, given that the whole purpose of the line was fixating on the past, but it showed Hasbro that you didn’t need to totally ditch the past to inject some modern ingenuity into the line.  Today, I’m looking at one of that line’s many, many variants of Joe heavy-hitter, Snake Eyes!

THE FIGURE ITSELF

Snake Eyes was part of 2009’s 10-figure “Hall of Heroes” sub-set of the G.I. Joe: 25th Anniversary line.  He was figure 10 of 10, bookending the assortment, which featured another Snake Eyes as figure 1 of 10.  Even in the limited engagement sub-line, there were still two different Snake Eyes variants!  The figure stands 3 3/4 inches tall and he has 22 points of articulation.  Sculpturally, he’s the same figure as the initial boxed-set 25th Snake Eyes, based on Snake’s original 1982 appearance.  After years of him being a pretty straight ninja, it walked him back to being a commando, who I guess would make more sense on a military task force.  That figure’s sculpt was very good, with tons of great little details littered all throughout.  The mask has tiny little vents at the front, his goggles are now clearly a separate piece, and you can even make out the stitching on his cowl.  His proportions are far more true to life than either the vintage or ‘00s lines, and the use of rubber overlay pieces for his web gear mean his gear has a much higher level of detailing, and he can even properly stow some of his weapons, something of a rarity in prior offerings.  The original Snake Eyes figure was actually part of the assortment as a cost-saving measure; a figure that required no paint applications.  This figure operates as a send-up to that, being predominately molded in straight black plastic.  He’s not completely without paint, though, as that would look rather cheap on a modern figure.  He’s got the slightest bit of accenting on his buckles, and the rim of his goggles.  It’s very subtle, enough that you might miss it, allowing him to maintain the same look as his original figure, while still maintaining that ever so slight extra detailing.  Snake Eyes is packed with a knife, handgun, uzi, and satchel, as well as a display stand with the G.I. Joe logo and his name printed on the front.

THE ME HALF OF THE EQUATION

Remember a few weeks ago when I was talking about All Time getting in a large collection of vintage Joes?  Well, this past week they followed it up with a collection of 25th Anniversary Joes.  As a huge shock to everyone, I’m sure, I didn’t come home with a huge stack of Vipers this time.  Nope, just this guy, who was one of a handful of Snake Eyes variants sitting at the bottom of the box.  He’s a very nice figure, just like all of the Snake Eyeses built on this body.  Hasbro really was at the top of their game here, and it resulted in great figures, even when they just were minor re-paints like this guy.

This guy was loaned to me for review by All Time Toys.  Like I mentioned above, they just got in a collection of these, which they’ve got available on their eBay Store.  So, if you want Snake Eyes or some of his other compatriots, check them out there.  Of course, I make no promises about this particular Snake Eyes, because he may or may not be staying in my collection.  And, if you’re more in the market for something new, also check out their website.

#1841: Solo Set

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HAN SOLO — MIMIBAN, STORMTROOPER — MIMIBAN, STORMTROOPER SQUAD LEADER, MUDTROOPER, IMPERIAL PATROL TROOPER, & TIE FIGHTER PILOT

SOLO: A STAR WARS STORY (HASBRO)

Solo may not have been quite the box-office-smash that Disney was hoping for, but it’s maintained a nice little following of fans, and by extension has managed to support a nice little selection of continuing merchandise.  While its toy presence hasn’t been quite as pervasive as the three films that preceded it, there are still some fun pieces trickling out.  Target’s picked up a healthy helping of exclusives, including today’s set, a selection of the film’s various Imperial forces, all in one convenient package!

THE FIGURES THEMSELVES

This set is a Target-exclusive boxed set, part of Hasbro’s continuing Solo line.  It started hitting retail shelves about two weeks ago, and if other such sets are anything to go by, it’ll be staying on them for at least a little while.

HAN SOLO

It would be a little bit strange to have a Solo set that didn’t include the title character, and as luck would have it, he does spend at least some of his screen time in an Imperial uniform, so he still fits the overall theme of the set.  The figure stands 3 3/4 inches tall and he has 7 points of articulation (get used to those numbers; they stand true for most of this set).  The sculpt is “unique” in the sense that it’s new to this set, but not totally unique to just this figure.  It’s a solid sculpt, nicely detailing Han’s environment specific armor from Mimiban.  The goggles and rebreather are separate from the main head sculpt, allowing for a fully revealed or fully covered look, which means he can operate both as a Han variant or a troop builder, depending on your fancy.  Also of note, the pre-posed arms, allowing for a proper handling of his weapon.  It’s a nice change of pace after a couple of years of purely straight-armed set-ups.  Han’s paintwork is solid, and pretty straight forward.  Application is mostly pretty clean, and all of the important details are there.  It gets the job done.  Han is packed with a blaster rifle, of a different style than we usually see.

STORMTROOPER

Perhaps the most difficult figure to find in the single-packed assortment was the Mimiban Stormtrooper.  He was a new trooper and he was packed at one per case.  Maybe not the best break-down, but at least Hasbro was nice enough to offer up a straight re-issue here.  The figure’s sculpt has a lot in common with the Rogue One Stormtrooper; no actual shared parts, but a very similar styling.  This new sculpt is pre-posed like the above Han, allowing for a proper rifle-holding pose.  His helmet has been slightly tweaked to add his blast shield, and he also gets an additional cape piece.  His paintwork is suitably muddy for the much more worn-in Mimiban armor, covering him in all sorts of much and grossness.  The Mimiban Stormtrooper is packed with a larger marksman rifle, as well as one of the standard E-11 blasters.

SQUAD LEADER

Hey, remember that awesome Rogue One Stormtrooper?  And then remember the Mimiban Stormtrooper?  Great.  Smash those two together and throw in a shoulder pauldron, and boom, you’ve got this guy.  Not really anything new, but it makes for the best Trooper variant available in the modern line, so I’m definitely counting this one as a win.

MUDTROOPER

Hey, remember the Han figure from up above?  Great.  This is the same figure.  Okay, not exactly.  The helmet and goggles are all one piece, and his rebreather is glued in place.  Throw on a slightly different application of paint on his right arm, and a slightly different blaster rifle and boom, new figure.

PATROL TROOPER

Easily one of my favorite designs from Solo was the Patrol Trooper.  It’s not a huge surprise, given that its really just a take on the Biker Scout, my favorite Trooper design of all time.  The absence of the Patrol Trooper from earlier assortments was definitely my biggest complaint about the line-up.  This figure gets an all-new sculpt, and boy is it a nice one.  The details are really sharply defined, and very accurate to the film.  It’s a slick design, and it certainly translated well into toy form.  The paint work maintains the slickness, with clean application and a lot of smaller details that you might not expect to see on a lower end figures.  There’s a lot of detail work going on there, and it makes the figure all the better.  Since a full patrol speeder seems like a bit much to ask for in this sort of set, the Patrol Trooper instead has to settle for a Biker Scout-esque blaster pistol.  Worse things have happened.

TIE FIGHTER PILOT

Though they don’t figure prominently into the film at any real point, there certainly have to be some TIE Pilots in Solo, somewhere, right?  More importantly, Hasbro had this great TIE Pilot mold sitting around, and had only released it a single time, so I guess they wanted everyone to have another shot at it.  This figure is sculpturally identical to the Rogue One version packed in with the TIE Striker.  Like the Rogue One Stormtrooper, it’s one of the most screen accurate sculpts Hasbro has produced, making it a fantastic offering even in spite of its lessened articulation.  The paintwork is ever so slightly tweaked from the last release, with a small bit of extra detailing on his helmet denoting that this figure is a higher ranking pilot than the last.  That’s a cool touch.  The TIE Pilot is packed with a mid-sized blaster, same as the prior release.

THE ME HALF OF THE EQUATION

Care to guess where I got this Target-exclusive set?  Did you guess “Target”?  Good for you!  You get the FiQ-No-Prize!  I didn’t quite know when or even where this set was hitting, but I knew as soon as I saw that Patrol Trooper that I was getting one.  So…I kinda bought this big set for one figure.  I know, bad Ethan.  In my defense, the Patrol Trooper is really, really good, and I found myself happy with all of the figures included, so I don’t at all feel like the money I spent was wasted.

#1840: Creature From the Black Lagoon & The Wolf Man

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BLACK AND WHITE CREATURE FROM THE BLACK LAGOON & THE WOLF MAN

UNIVERSAL MONSTERS MINIMATES

It’s Halloween, and I’m desperately trying to avoid opening yet another Halloween review with “Ooooo!  Aaaaah!  Scary!” lest I become some sort of cartoonish caricature of myself.  I have to hold to what little remains of my dignity, right?

On three of the five Halloweens for which I’ve written a review, I’ve focused on Diamond Select Toys’ ill-fated Universal Monsters Minimates.  It was a bold line, certainly well-received by the Minimates fanbase, but unfortunately hurdled by DST’s attempt to keep it a seasonal offering, thereby sentencing it to disappear from the public radar for about eight months out of every year.  Today, I’m setting my sights back on the first of the line’s three-year run, with a double offering of both The Wolf Man and The Creature From The Black Lagoon.

THE FIGURES THEMSELVES

Each year of Universal Monsters Minimates focused on two entries in the Universal Monsters catalogue.  2010, the debut year, chose Universal’s two most prominent in-house properties.  Specialty stores got two boxed sets, one based on each movie, while Toys R Us got an assortment of four two-packs.  Three of the packs were just re-packs of the boxed sets, with the fourth set being the TRU-exclusive re-colors of the main monsters in black and white.  That’s the set I’m looking at today.

CREATURE FROM THE BLACK LAGOON

“The Creature from the Black Lagoon was originally released by Universal pictures in 3D in 1954. Before the days of high definition color movies, the cinematographer and lighting crew had to work much harder to convey emotion and detail in their subjects. This paint variation attempts to pay homage to those past masters.”

I have a confession to make: I’ve never made it all the way through the original Creature movie.  I’ve tried, but it just never grabbed me the same way as the others.  I did, however, love Del Toro’s throw-back to it in The Shape of Water, so maybe I just needed a take with a little bit romancing?  The Gill-Man’s rather distinctive design made him one of the more complicated translations to Minimate form.  He’s built on the usual body, but gets new hands and feet, as well as a head piece and a chest cap.  Its success in capturing the design from the film is kind of mixed.  There’s no denying that a lot of effort was put into these parts, and the detail work is definitely top-notch.  In fact, I’d say the hands, feet, and even the torso cap, do their job pretty well.  The biggest failing, really, is the head piece.  If they were willing to do fully molded pieces, I think the Creature was definitely a design that should have gotten one.  In the movie, its all one slick piece; here it looks like he’s wearing some really goofy headgear.  The paintwork is respectable.  Obviously, it’s monochromatic, but that’s kinda the point.  The subtle detailing of his scales on his arms and legs works surprisingly well, and his face is as decent a rendition as we could have hoped fore.  The one slight drag is how dull the black detail lines are; these sets were produced during one of the worst periods of time for QC on Minimates, and while this pairing mostly escapes unscathed, this is the one lingering sign.

THE WOLF MAN

“The Wolf Man was originally released by Universal pictures in 1941 and was actually the second Wolfman picture they released. Before the days of high definition color movies, the cinematographer and lighting crew had to work much harder to convey emotion and detail in their subjects. This paint variation attempts to pay homage to those past masters.”

Man, there was some serious copy-pasting going on for those bios, wasn’t there?  I guess after writing three bios each for these guys, even DST was at a bit of a loss for words.  I’m more familiar with The Wolf Man than I am Creature.  It’s still not my favorite of the Universal stable, but I can at least appreciate it for what it is, and I do like the main Wolf Man design.  His slightly more humanoid appearance does lend itself slightly better to the Minimate style.  He still gets a unique set of hands and feet, as well as a full-mask cover for his head.  The hands and feet are respectable pieces, and have seen plenty of subsequent re-use. The head-piece…less so.  While they didn’t give Gill-Man his own head, Larry Talbot apparently warranted one, despite the fact that a hair-piece seems it would be far more appropriate here, since there’s a clear distinction between hair and face.  What’s more, the choice of a slip-cover mask instead of a fully-sculpted head is another baffling one, as none of the three versions of the Wolf Man available has anything but a blank head beneath it.  So many questions, and no real answers.  The paintwork on Larry is okay for the most part.  The details on the body look fine enough, though that shirt seems a fair bit on the light side for what we see on-screen.  The face/hair also doesn’t feel quite right; a number of people have commented that he gives off more of a Teen Wolf-vibe than a Wolf Man one.  He’s packed with Larry’s wolf-headed cane, and while I’m hardly one to complain about extra pieces, I’m not certain what he’s supposed to do with it without any sort of alternate Larry pieces.

THE ME HALF OF THE EQUATION

I was excited by the prospect of Universal Monsters Minimates when they were first shown off, but I’ll admit that after waiting the better part of a year for the actual product, and then finding out that the first two offerings were both films lower on my list of wants, my general interest cooled a bit.  It didn’t help that both boxed sets included unnecessary variants of the main monsters, and the civilians weren’t much to write home about.  So, I ultimately only picked up this one set, as it allowed me the opportunity to get the main monsters without any of the excess.  Neither of these two is really winning material.  The sets that followed definitely out-paced these greatly, but I think the line as a whole was always kind of stunted by the soft opening assortment and the long wait to see if anything better came of it.

#1839: VF-1S

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

VF-1S

ROBOTECH: REACTION FIGURES (SUPER 7)

This site could always do with a little more Robotech.  I didn’t know that until just recently, but now that I do, I’m working to fix that unfair dearth of Robotech reviews post-haste.  Post-haste, I tell you!  Of course, since a lot of Robotech/Macross stuff is imported, I’m at a slight disadvantage for quantity.  Fortunately, every so often, a domestic company will take a stab at it, with the most recent attempt being from Super 7, as part of their reclamation of the ReAction branding.  Surprising no one who’s familiar with my prior Robotech reviews, I picked up the Roy Fokker’s veritech, the VF-1S.

THE FIGURE ITSELF

The VF-1S is one of the six figures in the first series of Super 7’s Robotech: ReAction Figures line, and is inspired by the appearance Roy’s Veritech in the original Macross, more or less.  The figure stands 3 3/4 inches tall and he has 5 points of articulation.  Obviously, this whole scaling thing is being handled rather loosely, since the VF-1S would have to be quite a few times larger to properly scale with other ReAction lines.  But then these guys couldn’t be at the same very affordable price, which sort of defeats the whole point, doesn’t it?  The VF-1S shares a good number of his pieces with the other three VFs in this assortment; specifically, they’re all identical from the neck down.  This is true to the show, though, so it’s really just a sensible re-use on the part of Super 7.  It’s a decent sculpt, a bit more squat than the look from the show, which helps it to be a bit more in keeping with the ReAction aesthetic.  There’s still plenty of detail work all throughout, and the details are appropriately clean and machined looking.  He gets a unique head piece, which matches up with the body in terms of style, and also guarantees him a unique design from the others.  The VF-1S’s paintwork is fairly cleanly applied, and consistent with his on-screen appearance. He’s obviously had less wear-and-tear than the last 1S I looked at.  There are a few fuzzy paint masks here and there (the edges of the feet are the most obvious), but for the given scale, it’s passable.  His Skull Leader emblem is particularly well-handled, and helps to pull him slightly above the others in terms of detailing.  The 1S is packed with his standard-issue rifle, which he can hold in either of his hands, or mount on his right arm.

THE ME HALF OF THE EQUATION

Remember when I reviewed Mekaneck?  Well, I picked up the VF-1S at the same time.  In fact, it was the 1S that caught my attention, as I’ve had the hankering to pick up something Robotech-related ever since I reviewed the 0S several months back.  I love the 1S design, so I was a pretty easy mark for this guy.  I’m really, really pleased with how this figure turned out.  Sure, he’s not in the same league as one the high end Veritechs, but he’s still a lot of fun, and I really want to pick up a whole set to go with him now.

As with Mekanek, I bought the VF-1S from my friends at All Time Toys.  If you’re looking for other cool toys both old and new, please check out their website and their eBay Store.

#1838: Action Jackson

Posted by Ethan Wilson in Reviews and tagged with ,

ACTION JACKSON

ACTION JACKSON (MEGO)

How about a little history lesson?  So, after pioneering the whole action figure thing in 1964, Hasbro ran into a bit of troublesome territory after the fallout of the Vietnam War changed the public perception on war and the military.  Their up to that point very military-driven line was now out of vogue, necessitating a change.  In 1970, they introduced Adventure Team, an pulpy-action-adventure-inspired toyline that would breath another six years of life into the line.  Around the same time, Mego was looking to get into the newly-established action figure world, and aimed just a bit shorter than Hasbro’s market.  4 inches shorter, to be exact.  Action Jackson offered a cheaper alternative to what G.I. Joe was doing, a base figure for whom you could purchase sets of accessories, at a scale 4 inches smaller.  Unfortunately, Action Jackson was largely a commercial failure, but in a much more fortunate turn of fate, it was Mego’s desire to make use of the Action Jackson body molds that lead to the creation of their World’s Greatest Super Heroes line, and their eventual path to being one of the biggest toy companies in the market for the better part of the decade.  Now that Mego’s returned to store shelves, they’ve paid homage to the little guy that started it all, giving us a brand new Action Jackson.

THE FIGURE ITSELF

Action Jackson is another of the 11 single-packed figures from Mego’s first wave of their TV Classics line-up, though he doesn’t quite as much fit that descriptor.  I guess he’s just sort of along for the ride.  I’m not complaining if you aren’t.  The figure stands 8 inches tall and he has 16 points of articulation.  He uses the same re-tooling of the Type 2 body that Fonzie was using, which is quite amusing to the toy nerd in me, since the original Jacksons were all on the Type 1 body.  Jackson uses a re-tooling of the original clean-shaven caucasian Jackson head, which was the most common variant originally.  This newer version is a much cleaner and polished sculpt than the original, thus allowing for Jackson to look more at home with his compatriots.  The paintwork is on-par with the Fonz, though I don’t think it’s quite as strong as Norm’s was.  Still, it’s certainly a passable piece of work.  Jackson’s costume is made up of four different pieces.  He’s got his jumpsuit, his belt, and his boots.  They’re more-or-less the same pieces as the vintage counterpart, slightly tweaked to better fit the Type 2-style body, and to remove the metal snaps and replace them with velcro.  The original Action Jackson was sold sans accessories, in order to encourage buyers to get one of the accessory sets, but the new Jackson is packed with a handgun, which, thanks to the newer-syle hands, he can still hold halfway decently.

THE ME HALF OF THE EQUATION

There were the remnants of an Action Jackson amongst my dad’s Megos I played with growing up, which introduced me to the concept fairly early on.  However, being born 20 years after they were on store shelves, find a vintage one was never really an easy prospect.  I will admit that I when Mego sent me a review sample, I was secretly hoping it would be Jackson.  Since that wasn’t the case, I tracked one down from a near by Target a few weeks back.  Like the other two, he’s a solid, fun figure, and I’m quite glad to have him.  Now, here’s hoping for the other two head variants down the line!

#1837: Abe Sapien

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ABE SAPIEN

HELLBOY (MEZCO)

Man, I’ve gone almost the whole month of October without looking at anything all that spooky.  That in and of itself seems pretty spooky, right?  No?  Okay, fair enough.  Anyway, within the spirit of the month, I guess I’ll look at something from the more paranormal side of things, with another visit to the world of Hellboy, a series that blends so many of my personal interests.  Today, I’m looking at my favorite character from the Hellboy-verse, Abraham Sapien!

THE FIGURE ITSELF

Abe Sapien was released as part of the first series of Mezo’s movie-based Hellboy line.  There were two different Abes available, one standard release (shirtless), and one Previews-Exclusive release.  Today’s review focuses on the exclusive release, which allowed for (more or less) a fully-suited up Abe.  The figure stands 7 3/4 inches tall and he has 25 points of articulation.  He has the same articulation as the Kroenen figure I looked at a few years back, which means he has the same pluses and minuses as that figure.  Overall, it’s standard for the time, but there remain a few odd-ball joints that subsequent lines from Mezco would re-work or drop entirely.  Some of these joints, the mid-foot cut joints in particular, were a little fragile and prone to breakage, as was the case with one of my Abe’s feet.  Fortunately, it’s one of the less essential joints, so gluing the foot back together hasn’t robbed him of all that much.  Abe’s sculpt was shared between the two variants, and then re-tooled for the battle-damaged figure from Series 1.5 and the main Abe from Hellboy 2.  It’s a pretty solid sculpt overall.  It’s filtered a bit through the lens of Mezco’s more stylized sensibilities, so he’s a little ganglier, and a little more angular than he was in the movie.  There are two heads included with the figure.  Since this Abe is meant to be the fully kitted-out Abe, he comes wearing his goggled head, which is accompanied by the two pieces of his rebreather system.  The rebreather can easily removed by popping off the head, allowing the head to be displayed without it, if that’s your prerogative. By virtue of being a straight re-paint, he lacks the gloves and shoes that Abe should technically have in this set-up, but I suppose we can all just imagine that he’s decided to forego those pieces for the day. The paint is, of course, imperative here, since it separates him from the standard release.  The first Hellboy figures were a bit more reserved in coloring than later counterparts.  Abe in particular seems to have been toned down a fair bit from his on-screen appearance.  His blues are more murky, which makes him a little less eye catching.  I do like the shiny finish they’ve given him, but beyond that, he does sort of run together a bit more than I’d like.  Of course, he’s still far from terrible.  Abe is packed with a second head, sans the goggles, and also included a belt, but mine seems to have gone missing.

THE ME HALF OF THE EQUATION

I came into the first Hellboy movie with no familiarity of the source material, so I didn’t know what to expect.  Retailers didn’t either, so the figures weren’t the easiest to track down.  I never found the basic Abe, but I was fortunate enough to get this one through a friend who worked at Diamond.  He’s a decent figure, but perhaps not as strong as the Kroenen figure I looked at before.  Admitedly, my opinion may be slightly colored, since there are a greater number of Abes on the market to choose from.  Still, you could do a lot worse than this one.

#1836: SP//dr

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

SP//dr

MARVEL LEGENDS (HASBRO)

“Yo Shinji, get in the robot!  Your dad loves you, get in the robot!”

What, you weren’t expecting me to start this Marvel Legends review with a quote from Neon Genesis Evangelion?  Well…too bad?  It’s my site, I do what I want, which in this case means I’m gonna quote Evangelion for the purposes of drawing comparisons between the plugsuits from Evangelion and Peni Parker’s mecha suit, SP//dr, who just so happens to be the latest Spider-themed Build-A-Figure, who just so happens to be the figure I’m reviewing today.

THE FIGURE ITSELF

SP//dr is the Build-A-Figure for the second 2018 Spider-Man-themed series of Marvel Legends, another entry in the every-growing Spider-Verse line-up in Legends form.  The figure stands 9 inches tall and has 31 points of articulation.  The mech is a touch under-scaled to go properly with the standard Legends figure.  It’s probably about 3/4ths the size it should be as is.  That being said, it still reads as suitably larger than the other figures, and its not as underscored as *some* Build-A-Figures we’ve gotten over the years.  I find its size to be reasonable enough.  The articulation on this figure is just a touch imbalanced.  The movement on the legs and torso is really great, with a lot of range and mobility.  The arms are something of a different story, with the shoulders being just a slight step-up from straight cut joints, and the elbows just being single-jointed.  It’s not enough to ruin the figure, but it does make posing it a little bit frustrating.  The figure is sporting an all-new sculpt, which I’d imagine will be staying largely unique.  It’s definitely a strong one.  The details are clean and sharp, and its quite faithful to the suit’s design from the comics.  The actual suit lends itself rather nicely to toy form, though that’s hardly surprising from a take-off of Evangelion.  I’m always happy to see Hasbro do something that relies on technical detailing, as it really plays to their strengths.  SP//dr’s paintwork is fairly decent.  It’s bright and eye-catching.  The application could stand to be a little cleaner, though, as some of the red sections miss their mark by a fair bit.  It’s definitely a piece-by-piece thing, though, as some of the parts for mine are a lot better than others.  SP//dr includes no accessories, but as a Build-A-Figure, that’s perfectly acceptable.

THE ME HALF OF THE EQUATION

I like SP//dr well enough as a character, though I wasn’t 100% sure I was going to build this one when it was first shown off.  Of course, that’s really just because I was lying to myself, because seriously, in what world was I *not* going to want this figure.  It’s a Spider-Man-themed fighting robot.  That’s totally up my alley.  It’s a figure that’s not without of flaws, but the overall product outweighs the cons, and makes for quite a fun toy.  I’d love to get VEN#m and Daredevil to go with it, but that might be ever so slightly reaching, I guess.

There’s a lot of re-treading in the SP//dr Series, but with SP//dr and Ock as my last features in the reviews, that re-treading starts to make a lot of sense.  I had a long wait for this set, so there was a lot of anticipation and a lot riding on them.  I have to say, the individual figures impressed me a bit less this time around, with my favorite of those being Daredevil, a figure that’s really not that different from the last two Daredevils.  Maybe I’m just really a Daredevil fan.  Nevertheless, the set does sort of come into its own when fully assembled, and I think SP//dr makes the whole thing worth it.