Yearly Archives: 2020

#2456: Dana Barrett

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DANA BARRETT

GHOSTBUSTERS: THE PLASMA SERIES (HASBRO)

“When ghastly ghouls and spooky specters come looking to paint the town dead, the Ghostbusters are ready to answer the call — but not before Dana Barrett is possessed by Zuul, ready to unleash Gozer’s wrath on New York City!”

Though not a member of the titular team, Sigourney Weaver’s Dana Barrett is a pretty pivotal piece of both of the original Ghostbusters films.  Despite this, she’s received a whole lot less toy coverage over the years, thanks in part to her character being dropped from spin-off material such as The Real Ghostbusters, and in part to Sigourney’s general lack of interest in letting her likeness be used on toys.  If the notable quantities of Ellen Ripley figures that have hit retail in the last five years are anything to go by, she’s laxed up a little bit on such things.  Back when Mattel had the Ghostbusters license, the only Dana we got wasn’t a figure at all, but a statue that was in scale with the other figures.  That always felt like a bit of a rip-off.  Fortunately, Hasbro’s finally giving Dana her due, and have included her in their first assortment of figures!

THE FIGURE ITSELF

Dana is figure 5 in the first assortment of Plasma Series figures.  Like most Dana figures, she’s based on her appearance while possessed by Zuul, which is a sensible enough choice as far as memorable looks go.  It’s perhaps not the easiest to translate into toy form, but we’ll discuss that more in a moment.  The figure stands a little over 6 inches tall and she has 27 points of articulation.  Dana’s articulation isn’t quite as practical or useful as that on the ‘busters.  The skirt does a lot of limiting on the legs, and the elbow joints in particular don’t have much range at all.  These are, of course, the symptoms of adapting such a design into plastic, since her rather flowy and lightweight dress doesn’t really translate into plastic all that well.  And really, that’s kind of the overwhelming thing that you run into when dealing with this figure: it’s translating a design that just doesn’t translate so well.  There are parts of the figure, particularly on the torso and arms, where they’ve made some design compromises so as to not impede articulation quite as much, and it doesn’t really work.  I mean, I like that the arms are separate pieces, thereby allowing actual movement, but ultimately they’re separate pieces, and very obviously separate ones at that, which don’t look like the single piece of clothing from the film.  Instead, she kind of looks like she’s wearing separate sleeves or something.  Moving away from the hard to translate flowy dress, let’s talk about the hard to translate poofy hair.  Sigourney Weaver’s hair later in the film is…well, there’s a lot to it, and it behaves in ways that really only hair can do.  When you try to make that into a solid piece of plastic, changes have to happen.  And that they did here.  The actual face does sport a solid likeness of Weaver, but the hair around it seems strange.  She’s definitely got some helmet hair going on here, and it doesn’t really look right from any angle.  I can see what they were going for, but it just ends up looking strange, and just off.  It’s the weakest part of the figure, because it just never looks right, no matter how you pose her. One area where the figure actually does pretty well consistently is the paint.  The face uses the printing, which works quite well for her heavy make up, and I quite dig the metallic sheen on her dress.  I would have liked for her sash to have a little more accenting or something going on, but it’s not atrocious as is.  Dana’s only accessory isn’t really anything for her, but is instead the torso of the Terror Dog Build-A-Figure.

THE ME HALF OF THE EQUATION

Going into this set, I was expecting Dana to be the weakest of the bunch.  I don’t feel I was wrong on that front.  However, she’s actually a fair bit better than I was expecting her to be, and honestly Hasbro deserves some pretty major kudos for actually attempting to make her a real figure, rather than just the accent piece that Mattel saddled us with.  This figure definitely has her flaws, but is still far from terrible, given how tricky to adapt this particular look is.

Thanks to my sponsors at All Time Toys for setting me up with this figure.  They’re currently sold out of their initial shipment of the line, but should be getting more soon.  If you’re looking for other toys both old and new, please check out their website and their eBay storefront.

#2455: Lobot

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LOBOT

STAR WARS: POWER OF THE FORCE II (KENNER)

“As the cyborg administrative assistant to Cloud City, Lobot made certain that Lando Calrissian and his Rebel companions would safely escape the Imperial occupied city.”

That he sure did.  Yeah, so, it’s, uhh, Lobot.  You know?  Lobot?  The cyborg administrative assistant to Cloud City who made certain that Lando Calrissian and his Rebel companions would safely escape the Imperial occupied city?  Like it says in the bio?  …Yeah, I don’t have a ton to say about Lobot, I guess.  He’s the guy with the funny looking techno earmuffs who dresses like he’s going out to the discotheque.  Seems like he’s pretty fly.  And hey, he’s had a few toys, so how about that?

THE FIGURE ITSELF

Lobot was released as part of the basic Power of the Force II line in 1998.  It marked his second figure, following his vintage release.  He’d get one more in 2004, and then that would be it for poor Lobot.  I guess not everyone’s rushing out to get those funky techno earmuffs.  The figure stands 3 3/4 inches tall and he has 6 points of articulation.  Sculpturally, this figure feels like something of an anomaly for the year he was released.  By 1998, Power of the Force had lost a lot of its early installment weirdness, what with the wonky proportions and the goofy posing and all.  The original likenesses for both Luke and Leia had been dropped in favor of slightly more accurate ones, and in general earlier core figures were getting reworked into slightly less weird monstrosities.  But Lobot?  Well, you’d be forgiven for assuming Lobot was a year one figure.  He’s oddly proportioned, rather light on detailing, and one of the more heavily pre-posed figures to come out of the line (further highlighted by the fact that Lobot never does much other than just stand there, making the usual Star Wars pose kinda perfect for him).  He’s got a disco-esque pose that rivals the original Lando, further pushing that “year one” feel on this guy.  You almost have to wonder if Kenner knew that Lobot was destined to stand right next to that Lando, and rather than doing an updated Lando so that neither would look out of place, they opted to instead make Lobot a proper companion piece.  Alternatively, maybe he was just a leftover sculpt from earlier in the line that took a while to get a proper release.  It could really be either.  Whatever the cause, it’s really darn goofy looking.  I do have to give them some credit on the paint front, though.  He could have been quite bland, but there’s quite a bit of detailing going into the headset, and it actually looks pretty cool.  Lobot is packed with a blaster pistol and data pad, for both sides of the sensible disco cyborg’s life.

THE ME HALF OF THE EQUATION

My first introduction to Lobot as a kid was not via the movies, or even via this figure, but rather via Lego’s Cloud City Car set, which I got as a birthday gift the year it was released.  I had no clue who the heck this guy was, and the internet wasn’t quite the fountain of knowledge that it is today, so I went a little while without knowing anything about him, until I noticed him in one of my rewatches of Empire.  This particular figure was another from the large batch of figures I picked up a couple of falls ago, as I was working towards filling in my PotF collection.  He’s sooooooo goofy, but if I’m honest, after a bunch of “they’re fine figures, but a bit boring”, Lobot’s something of a breath of fresh air.  I mean, at least he’s memorable.

Thanks to my friends at All Time Toys for setting me up with this guy.  They’ve got a decent back stock of Power of the Force, and other cool toys both old and new, so please check out their website and their eBay Store.

#2454: Captain America & Peggy Carter

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAPTAIN AMERICA & PEGGY CARTER

MARVEL MINIMATES

Even in these times of uncertainty for the line, Marvel Minimates has a fairly steady stream of new product always coming from at least one retailer…provided you can actually find any of that new product.  Walgreens has been great for getting lots of new ‘mates on the books, but in 2018, they started kind of having a bit of a back-up in their distribution process, and two years later we’re still kind of feeling it.  Officially hitting at the end of last year, Series 11 has a decent mix of things going for it, including today’s set, Captain America and Peggy Carter!

THE FIGURES THEMSELVES

These two were part of the 11 Walgreens-exclusive set of Marvel Minimates, and are animation-based, specifically hailing from the Avengers Assemble show, though in the case of both ‘mates featured here, the movie-inspiration is also pretty strong.

1940s CAPTAIN AMERICA

“Given enhanced strength, speed and durability in a top-secret experiment, Steve Rogers became a symbol of hope for Americans in World War II.”

We’ve had a couple of these MCU-esque ’40s Caps in the line, and this one’s just another.  This marks the first time he’s been animated, though!  Structurally, Cap’s just got the one add-on piece for his helmet.  It’s a re-use from the ’40s Cap in the Series 55 assortment, which is fair enough.  That piece has always looked a bit better than the one we got from TFA‘s line, and its slightly streamlined appearance works a bit better with the more vanilla nature of this figure.  Everything else here is paint.  This is the animated recreation of the film design, so it dispenses with a number of the details for something a bit cleaner.  I rather like it, honestly.  There’s a definite simplicity to it, but that doesn’t mean it’s bad in the slightest.  Cap is packed with his shield, a spare hand with a connection for it, an alternate hair piece for an unmasked look, and a clear display stand.

AGENT PEGGY CARTER

“Peggy Carter, a British agent who knew Captain America during World War II, was briefly brought from 1949 to the present day by Kang the Conqueror.”

Since Minimates had claim to the only Peggy Carter action figure on the market for a good eight years,  I guess it’s only fitting that when Legends got in on the game, they would double their efforts…literally.  This is our second Peggy ‘mate, and our third Peggy figure, ever, so that’s all pretty cool.  What’s more, it takes my complaints about wanting the Hydra base-storming gear from the end of TFA into account!  More looks for Peggy!  Yay! Peggy is a pretty basic ‘mate in terms of construction.  She’s got the hair piece, and that’s really it.  It’s a new piece, and definitely goes with that animated style, but it certainly fits the character.  In fact, I like this piece a bit more than the one used on the movie Peggy.  It just really feels like it gets the character down.  Again, the heavy emphasis here is on the paint.  As with Cap, she’s definitely got a very simplified look about her, but that said, the face still looks remarkably close to Haley Atwell in terms of likeness.  It also seems a little less void of expression than the last ‘mate.  The detailing on the jacket is all pretty sharp looking as well, and this has got to be one of the few times that the somewhat washed out nature of the animated ‘mates didn’t feel totally out of place. What really makes Peggy shine are her accessories.  She gets a hat-wearing hairpiece, a spare torso and arms, and a skirt piece, which effectively allow you to build a second figure, of Peggy in her trench-coated appearance.  It’s another quite distinctive look, and another really strong design for the character.  It also really adds some serious value to a figure that was already really cool, and distracts from the always present issue of the Walgreens sets not getting guns by giving Peggy a much preferred replacement.

THE ME HALF OF THE EQUATION

I’ve kind of been falling out of Minimates (which is only fair, since so has DST, if I’m honest), but Max has been keeping me at least a little bit invested, and he was nice enough to hook me up with this set earlier in the year.  Cap is kind of a nifty figure, presenting something of a what-if scenario where the line hadn’t evolved so much by the time the MCU films rolled around.  He’s kind of a movie Cap via Minimates Year One, and I think that really works for him.  I’m getting real Series 5 Cap vibes off of this guy.  The prior Peggy was good for the time, and had the novelty of being the only one for a while, but this Peggy is pretty much the ultimate version of the character, with two really great looks and a pretty spot-on likeness.  This set is pretty much all win.

#2453: Winston Zeddemore

Posted by Ethan Wilson in Reviews and tagged with , , , ,

WINSTON ZEDDEMORE

GHOSTBUSTERS: THE PLASMA SERIES (HASBRO)

“As the voice of reason of the Ghostbusters team, Winston can calm things down when the world gets a little crazy.”

Hey, it’s Winston!  The Ghostbuster that doesn’t get the credit he–wait, I’ve been this way before, and I’m sure to be this way again.  What?  Was that a Neil Diamond reference?  That’s…well, that’s really odd and doesn’t seem to fit the general aesthetic, does it?  Also, really diverts the attention away from poor Wintson, who, as I’ve mentioned before, really doesn’t get the credit he deserves.  Man, I’m falling into the same trap everyone else does, aren’t I?  Well, the only way I can see fit to properly make it up is to review this figure of Ernie Hudson, Ghostbuster!

THE FIGURE ITSELF

Winston is figure 4 in the first assortment of Plasma Series figures, and wrapping up the ‘busters team.  Like Egon, he’s just a single-pack, but I can’t say that’s terribly surprising, given the aforementioned lack of credit for pretty much anything having to do with Winston.  The figure stands just over 6 inches tall and he has 29 points of articulation.  From the neck down, Winston’s the same figure as Egon, which is a fairly sensible choice, given the similar builds and usual state of their uniforms.  Anything else really would have just been change for the sake of change.  He does get a new head sculpt, and it’s another really strong one.  I’m not sure if it’s quite as good as Egon, but it’s definitely got a very clear Ernie Hudson likeness, and doesn’t overly genericize or go too far into caricature like the DST, Mezco, or Mattel versions.  I was initially a little iffy on the slightly open mouth for the sculpt, because such expressions can always have a lot of room for error, but I think it ultimately looks really good, and I was impressed by how well the likeness held up from various different angles.  In terms of paint, Winston is pretty similar to the other three ‘busters, which is to say he looks pretty good.  The face printing is again really good at highlighting the likeness on the sculpt, and really giving him a life-like feel.  Winston of course gets the same removable proton pack as the other three, but gets probably the coolest additional part of the main ‘busters:  a proton blast effect.  It’s really well done, and it’s kind of a shame we didn’t get the piece for all four team members.  Winston also includes the final leg to the Terror Dog Build-A-Figure, which I’ll be taking a closer look at next week.

THE ME HALF OF THE EQUATION

The kind of iffy nature of the likenesses on both the Mattel and DST Winstons was a decent part of why I didn’t jump into either of those lines, so I was pretty happy to see how well this particular version had turned out, and was definitely very happy with him once I saw him in person.  Of the four, I’d rank him just after Egon in terms of my favorite figure in the set.  He turned out very well, and hopefully he too will be getting a repack down the line so that he’s not too hard to find.  In general, these four are really just the best bang for your buck when it comes to movie-styled ‘busters, and I’m looking forward to what sorts of variants and such Hasbro has in mind.

Thanks to my sponsors at All Time Toys for setting me up with this figure.  They’re currently sold out of their initial shipment of the line, but should be getting more soon.  If you’re looking for other toys both old and new, please check out their website and their eBay storefront.

#2452: Ray Stanz

Posted by Ethan Wilson in Reviews and tagged with , , , ,

RAY STANZ

GHOSTBUSTERS: THE PLASMA SERIES (HASBRO)

“As the heart of the team, Ray Stantz is always eager to get down to bustin’ business!”

Okay, let’s do this intro thing.  Yeah, right, intro…Umm, so one time I took a “which Ghostbuster are you?” quiz and I got Ray.  And it kind of baffled me a little bit, because Ray’s my least favorite–let me rephrase–Ray’s my fourth favorite Ghostbuster.  Like, I mean, I don’t *dislike* the guy, but he fades into the background a bit for me. So, you know, there it is.  Well, best review the figure.

THE FIGURE ITSELF

Ray is figure 2 in the first assortment of Plasma Series figures.  Like Venkman, he’s one of the double packs in the set, and if I’m honest, that seems a little surprising to me.  I’m guessing Egon and Winston will be getting repacks down the line, but it does feel weird for Ray to be twice as common as them.  But he’s my least fourth favorite Ghostbuster, so what do I know?  The figure stands just over 6 inches tall and he has 29 points of articulation.  He still shares a number of parts with the other two figures, but gets his own head and torso.  The torso gives Ray a slightly pudgier build than the rest of the team, which is appropriate, and certainly better looking than how Mattel handled it.  It does make it a little trickier to get the proton pack in place on this particular figure, but I was able to get it properly attached without too much extra effort.  The head sculpt is a pretty strong piece, pretty much on par with the Egon sculpt in terms of likeness.  Again, this is another area where this figure really out paces the Mattel offering, as I always found their Ackroyd likeness to be their worst of the bunch.  This one, on the other hand, is pretty much the spitting image, goofy expression and all.   Ray’s paintwork is pretty darn solid, with the basics more or less matching the other two.  Like Egon, the face print works very well here, and really just lends even more to how good that likeness is.  In addition to getting the same proton pack as the other two, Ray is also packed with his goggles he’s seen sporting early in the movie, as well as one of the left legs to the Terror Dog.  The goggles in particular are a really strong piece, sitting snuggly on his head, and managing to not look too bulky, while still not requiring his hair to be too matted down in order for them to look okay.

THE ME HALF OF THE EQUATION

Ray’s not ever really going to be my first choice when it comes to the Ghostbusters and toys, but I won’t deny that this figure did jump out at me when I saw the initial photos, and again when I saw the figures in hand.  Hasbro definitely put a lot of effort into getting him right, and the end result is another really strong figure.  He doesn’t quite beat out Egon, but personal preference may factor into that ever so slightly.

Thanks to my sponsors at All Time Toys for setting me up with this figure.  They’re currently sold out of their initial shipment of the line, but should be getting more soon.  If you’re looking for other toys both old and new, please check out their website and their eBay storefront.

#2451: Peter Venkman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

PETER VENKMAN

GHOSTBUSTERS: PLASMA SERIES (HASBRO)

“The mouth of the Ghostbusters team, Peter Venkman could probably talk a ghost into trapping itself if he tried.”

Alright, let’s dive headlong into this new Ghostbusters set, shall we?  I haven’t reviewed a ton of Ghostbusters stuff on the site, but I’ve reviewed enough to have run out of compelling things to say here in these intros.  I mean, really, how many times can you break down the role that each of the Ghostbuster plays?  Hasbro did a serviceable job breaking it down in the bio up there, so let’s just jump into reviewing the team’s mouth, Dr. Peter Venkman!

THE FIGURE ITSELF

Venkman is figure 1 in the first assortment of the Plasma Series.  He’s one of the assortment’s two double-packs, which makes some sense, seeing as he’s kind of the front man of the whole thing.  The figure stands just over 6 inches tall and he has 29 points of articulation.  Venkman has several parts in common with yesterday’s Egon figure, but does get a new head, as well as new shins, showcasing Venkman’s more lax approach to wearing his jumpsuit and boots.  The body sculpt being the same between these two isn’t too unreasonable, and it means that it’s still a pretty solid sculpt in its own right.  The new shins work well with the other pieces, and do a respectable job of recreating that slightly unique appearance.  His new head sculpt is, of course, the main piece of interest here.  It’s definitely not as nice as the Egon sculpt.  I think there’s definitely a lot of Bill Murray in the sculpt, certainly more than some attempts we’ve seen, but it’s not quite on the mark.  There are some angles where the likeness really peeks through (especially when viewed from the left), and others where he looks far more like Bing Crosby.  In general, I think it’s a little bit cartoony.  Given the cartooniness of Mattel’s take as well, I have to wonder if that might actually be something coming from Murray himself; I know some actors can be weird about likenesses being too close to their actual appearance.  Venkman’s paint work is pretty close to Egon’s, albeit with the expected changes to the head and legs, as well as the new name on the name tag.  I did find that the face application wasn’t quite as strong on Venkman, which may be contributing somewhat to the issues with the likeness.  Venkman is packed with the same removable proton pack as Egon, as well as a ghost trap, and one of the Terror Dog’s right legs.

THE ME HALF OF THE EQUATION

Venkman always seems to draw the short straw, no matter who’s handling the line.  Neither Mattel, nor DST had much luck with him either, and he’s definitely the weakest of Hasbro’s set.  That being said, they managed to land it a bit better on their first attempt than others, and I think he really only sticks out as the worst because of how high the bar is with the others.  He’s not a bad figure by any stretch of the imagination, and he certainly could have been much worse.  And, hey, at least he’s not permanently slimed, or weirdly replaced by a Walter Peck figure.  That would be weird, wouldn’t it?

Thanks to my sponsors at All Time Toys for setting me up with this figure.  They’re currently sold out of their initial shipment of the line, but should be getting more soon.  If you’re looking for other toys both old and new, please check out their website and their eBay storefront.

#2450: Egon Spengler

Posted by Ethan Wilson in Reviews and tagged with , , , ,

EGON SPENGLER

GHOSTBUSTERS: THE PLASMA SERIES (HASBRO)

“When ghastly ghouls and spooky specters come looking to paint the town dead, the Ghostbusters are ready to answer the call! Egon Spengler’s like a proton: he always stays positive!”

We went 25 years without any proper toy coverage of the first Ghostbusters, but since hitting that 25th marker, we haven’t exactly had a shortage, especially in terms of collector-oriented lines.  Mattel got in on the scene in 2009, with a line of articulated six-inch figures, which ran for a couple of years through their Matty Collector site.  Diamond Select Toys initially picked up the license for Minimates, but eventually expanded that to their 7-inch Select format.  Even Mezco got into the game, with a set of the main team as part of their One:12 Collective last year.  At the start of this year, Hasbro announced that they were the latest holders of the Ghostbusters master license.  So, are we treading on the same ground again, or will Hasbro well and truly make it their own?  Well, to help answer that question, I’m going to be doing things here ever so slightly differently, and making a rather direct comparison between two versions of my man Egon, one being Hasbro’s new one, and the other being Mattel’s old offering (originally given its own review here).  Let’s jump right on in.

THE FIGURE ITSELF

Egon is figure 3 in Hasbro’s first series of Ghostbusters: The Plasma Series…he was also figure 3 from Mattel, so I guess he’s just always the third one.  Unlike Mattel’s offerings, these Ghostbusters aren’t exclusive to anywhere, although they’re still a little tricky to find at mass retail at the moment.  Egon’s based on his appearance in the first film, which is so far the source of the whole line’s appearances so far.  The figure stands just over 6 inches tall and he has 29 points of articulation.  Height-wise, he and his Mattel counterpart have negligible differences.  The first real differences come into play with the articulation.  Not only does the Hasbro Egon have more articulation, what he’s got is also just plain has a better range on it.  Hasbro’s been steadily improving their articulation scheme throughout Legends, Black Series, and Lightning Collection, and Egon represents the best of those kind of getting rolled into one.  Not only does he get double joints at both the elbows and knees (an amazing improvement on the Mattel version, which couldn’t even get a full 90 degrees out of either joint), but he also gets a ball-jointed waist and even butterfly joints for the shoulders, which really helps with proper proton wand posing.  The joints are also a fair bit better worked into the sculpt on the Hasbro figure than on the Mattel equivalent (which, to be fair, is using a sculpt that is mostly over a decade old at this point), meaning he looks a little more pleasing from that standpoint as well.  While the Mattel Egon likeness didn’t look *unlike* Harold Ramis, it was always a somewhat weak offering.  Hasbro’s stab at it is really, really good, and is a pretty much pitch-perfect Ramis likeness.  In particular, I think they way they’ve done the glasses, more just suggesting their presence than actually putting a small pair of glasses on top of the face, works a lot better at this scale and style.  The Mattel Egon shared everything below the neck with his fellow ‘busters. which was a little bit to his detriment.  Hasbro’s Egon still shares a fair number of his parts with Peter and Winston, but not with Ray, who was kind of the odd-man out in terms of build, and ultimately the one whose build really through off the rest of the team on the Mattel side.  The Mattel jumpsuit really didn’t hang very realistically, but Hasbro’s actually looks like someone wearing a baggy jumpsuit.  Moving onto the gear, like the later Mattel figures, this Egon has a removable proton pack, though its a fair bit more detailed, and looks to be better scaled to the figure.  He can also more properly stow his neutrino wand on his back (it doesn’t have to go at a weird angle), and the pack sports all the proper straps, including the ones that were missing from Mattel’s.  In terms of paint work, Hasbro’s really got things down resulting in more consistent, more lifelike final product than what Mattel gave us, thanks largely to Hasbro’s face printing tech, which really does the sculpt a lot of favors.   In addition to the previously mentioned removable proton pack, Egon is also packed with his PKE meter, which can be hung from his belt, as well as one of the left legs to the Terrordog Build-A-Figure.

THE ME HALF OF THE EQUATION

Back when the Mattel stuff was first starting to hit, I really wanted to get into it, but Matty Collector and its insane pricing structure and ordering process wasn’t anything I wanted to be messing with.  By the time the far easier to acquire Walmart set was put out, I was kind of burned on the whole thing, and Egon was the only one I could really justify purchasing.  The Hasbro announcement had me cautiously optimistic, and I think it may have well paid off, because this Egon is by far the best version of the character out there, and undoubtedly blows the Mattel version out of the water.  Hopefully, he won’t prove too hard to find in the long run.

Thanks to my sponsors at All Time Toys for setting me up with this figure.  They’re currently sold out of their initial shipment of the line, but should be getting more soon.  If you’re looking for other toys both old and new, please check out their website and their eBay storefront.

#2449: Zeo Blue Ranger

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ZEO BLUE RANGER

POWER RANGERS: LIGHTING COLLECTION (HASBRO)

When it originally started over in the States, Mighty Morphin’ Power Rangers was adapting footage from Kyōryū Sentai Zyuranger.  That was all well and good for the first season, since there was a whole season of equivalent footage to use.  However, when Season 2 came along, Saban opted not to adapt the follow-up, Dairanger, quite as directly, largely due to wanting to keep the Rangers with a consistent look for US audiences.  By the next season, Kakuranger, they came up with a story relevant reason for the new looks (being tied to the Alien Rangers, who replaced the de-aged Rangers).  When it came time for the next follow-up, they had thoroughly exhausted any and all Zyuranger footage, and even burned through the extra footage they’d commissioned, so for their fourth season, they gave up the ghost and decided to fully revamp the show for Power Rangers Zeo, which adapted the 19th Super Sentai series, Chouriki Sentai Ohranger.  Zeo is finally making its way into Hasbro’s Lightning Collection line proper, kicking things off with Rocky Desantos, the Blue Zeo Ranger!

THE FIGURE ITSELF

Zeo Blue is one of the four figures in Series 4 of The Lightning Collection.  Technically, he’s the second Zeo figure in the line, if you count the SDCC Zeo Gold from last year, but he’s the first at standard retail (a proper retail release of the Gold Ranger will be joining him in Series 5).  He’s also our second Blue Ranger in the line.  I’m always a fan of getting more Blue Rangers!  The figure stands 6 1/4 inches tall and he has 34 points of articulation.  A surprising amount of this figure’s sculpt is new, if you can believe it.  I mean, I’m certain that, like, 90% of it’s going to get re-used for the other two male Zeo Rangers, but given how few new parts there were on Galaxy Red.  I was expecting to see a touch more re-use here.  As it stands, it looks like it’s just the upper arms, hands, and feet are shared with prior figures.  Everything else is new, and looks pretty spot-on to the show design.  As usual, the helmet’s really where the best work shows up, but I must admit, I was quite impressed by how ornate the detailing on the gold sections of the costume was.  It really gives the sculpt that extra pop, that I kinda felt was missing from, say, Galaxy Red. The paintwork on my Zeo Blue is pretty decent, but as with prior entries in this line, I had to check against a few different versions to check for the best paint.  As a whole, though, it does look like this assortment has less issues than prior releases.  Zeo Blue is packed with two sets of hands (in fists and gripping), his pod sword (with an energy effect), laser pistol, and an unmasked Rocky head.  While I’d love to see a little more variety in the weapon configurations, such as a collapsed version of the pod sword, or even a combined advanced Zeo Laser, this is a decent basic layout.  I’m still definitely a fan of getting the unmasked heads, and Rocky’s is sporting a pretty decent likeness as well.

THE ME HALF OF THE EQUATION

I’ve discussed previously how In Space is “my Power Rangers”, but Zeo‘s kind of the one that actually got me into it, and was the show I had the most toys from.  Zeo Blue was actually my second Power Ranger, and I at the time still believed it was Billy under the helmet, before then erroneously believing it was Jason, because I knew it was the “former Red Ranger” and my mind hadn’t quite wrapped its head around Rocky as a character.  I was actually pretty happy to see him show up as the first regular retail Zeo release, so he was a day one figure for me.  I’m very happy with the final product, and look forward to getting the rest of the team in this style, hopefully sooner than later.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for Lightning Collection, or other toys both old and new, please check out their website and their eBay storefront.

#2448: Bonebreaker

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BONEBREAKER

X-MEN (TOY BIZ)

“The villainous cyborg known only as Bonebreaker desires nothing more than the chance to wreak havoc. Employing his robotic abilities first as a mercenary and then as a member of the nefarious Reavers, Bonebreaker leaves a trail of destruction wherever his travels lead him!”

Man, we are just jumping into the deep end with the obscure ’90s X-Men characters, aren’t we?  I mean, it’s kinda hard to top Senyaka and his lack of any staying power in the slightest, so that does give today’s entry a slight leg up…okay, so not “leg up”…because, you know, the lack of legs and all.  Tank up?  Tread up?  Ah, this is definitely way too much thought to put into a Bonebreaker intro.  Look, he’s half-man, half-tank.  It’s pretty cut and dry stuff, really.

THE FIGURE ITSELF

Bonebreaker was released in Series 7 of Toy Biz’s X-Men line.  It was the final series to be released solely on the more character-specific short cards, which actually proved a little tricky for the breaker of bones here, since they had to manage fitting his lower half into the package with him.  You have to wonder if that may have slightly influenced the decision to go to the larger cards.  By and large, Series 7’s line-up is one of the softer selection of characters in this line, with only two real “heavy hitters” in the line-up, one of them being quite possibly the most boring Wolverine the line ever produced.  Of the remaining five figures, Bonebreaker may possibly be amongst the best known (although I myself tend to favor Ch’od and Raza on that front; it really comes down to which era of the comics you’re most familiar with).  Why am I talking so much about all of this not Bonebreaker stuff?  I don’t know.  I’m honestly not sure I can bear to talk only about Bonebreaker for quite this long.  But, I suppose I’ve stalled for long enough.  The figure stands 3 inches tall and has 7 points of articulation, as well as rolling wheels (though not proper moving treads, unfortunately).  There aren’t exactly a lot of potential posing options with this guy, but it’s not exactly for lack of trying; there’s really only so much you can do with the design.  The sculpt is decent enough for the time, with a pretty on-brand sculpt for the human portions.  His lower tank half is actually pretty impressive, with fairly sharp and solid technical detailing throughout.  It rivals Ch’od for the best sculpting work in this assortment.  The paint work on Bonebreaker is fairly drab and basic, which I guess is more or less a clean translation of the source material.  The tank’s sculpt kind of suffers here, because the nice detail work ends up getting a bit lost in all that un-painted turquoise plastic.  It’s perhaps not the best choice of coloring.  Bonebreaker was originally packed with two guns, one hand-held, and the other for mounting to the tank.  I have neither.  For shame.

EDIT 12/25/20 – I now have both of the two guns.  Less shame!  Also, I found one of his included missiles that I didn’t even list before.  For shame again!

THE ME HALF OF THE EQUATION

Bonebreaker’s a figure I remember seeing…a lot.  This whole assortment (barring Rogue) was everywhere for a long time, but Bonebreaker is the one I recall seeing the most.  I didn’t get one, I guess because the design didn’t really speak to me, and because his appearance in X-Men: The Animated Series wasn’t one of my favorites.  But, I’m getting pretty serious about the Toy Biz X-Men collection, so I ended up picking up Bonebreaker here loose while on vacation last summer.  He’s honestly a bit better than I’d expected, and I’d like to see how he might turn out in Legends form.

#2447: Dengar

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DENGAR

STAR WARS: POWER OF THE FORCE II (KENNER)

Why is it Dengar always ends up the last Bounty Hunter I review in a given Star Wars set?  I mean, it’s probably that he’s my least favorite.  That’s probably it.  I made a lot of fun of him in my review of the Black Series figure.  I guess I’ll spare him the mocking this time around.  Even if his idea of an imposing look is wrapping himself in toilet paper… I mean, in this day and age, I guess that could be seen as a status thing, couldn’t it?  That’s some pretty valuable armor, right there.  Perhaps Dengar was just getting ahead of the game.  Yeah, that’s it.

THE FIGURE ITSELF

Dengar was added to Power of the Force in 1997, the same year as both Bossk and 4-LOM, making it a bounty hunter-heavy year.  While most of the bounty hunters were Empire-based, Dengar is actually based on his brief appearance from Return of the Jedi, as denoted by his lack of backpack.  The figure stands 3 3/4 inches tall and sports 6 points of articulation.  While the pre-posing was working its way out by this point, Dengar still gets just a touch of it, which has the unfortunate side effect of making him quite difficult to keep standing. That’s rather annoying.  Aside from that, the sculpt’s an okay offering.  Obviously, it’s not as technically impressive as the Black Series release, but for its era, it’s a fair recreation of his gear from the movies.  Some of the details are a little soft, but, well, that doesn’t look super out of place on Dengar.  By design, this guy’s a little schlubby.  Dengar’s paint work isn’t the most thrilling combo of colors, but it’s certainly accurate.  There’s also a fair amount of solid accent work on the grime and dirt, which makes him look appropriately like he’s been mucking around in…uh, muck, I guess.  Dengar is packed with two blasters, one long, one short, which is a solid arsenal.

THE ME HALF OF THE EQUATION

My general dislike of Dengar goes back to when I was a kid, where I never really found him to be terribly impressive.  The result of that, of course, is that I didn’t own this figure growing up.  He got added to my collection in the last two years, as I’ve been really laying into this “complete run of PotF” thing.  He’s okay, but he’s still Dengar, and the fact that he’s so darn hard to keep standing certainly doesn’t help him out.

I got this guy from my friends at All Time Toys.  They’ve got a decent back stock of Power of the Force, and other cool toys both old and new, so please check out their website and their eBay Store.