Author Archives: Ethan Wilson

#0444: Rory Williams

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

RORY WILLIAMS

DOCTOR WHO

Today marks Day Seven of my Christmas Reviews. We are officially at the mid-point of these reviews, so hang in there.

My gifts this year had a definite split between Aliens stuff and Doctor Who stuff. The last two days were Aliens-related, so it’s only fitting that I jump back to Doctor Who for the day. The last set of Who figures added to my Eleventh Doctor collection; today’s figure does the same. In an effort to make poor Amy even less lonely, today I’ll be looking at her husband Rory, second companion of the Eleventh Doctor.

THE FIGURE ITSELF

Rory was released as part of Character Option’s 5-inch scale Doctor Who line. He was a later addition to the line, coming after it had stopped doing regular series releases. As such, Rory was released on his own, although there were three different color variations available. This one is the red/blue combo, which is the most readily available of the three. Rory is roughly 5 inches tall and he has 18 points of articulation. While I don’t know specifically what episode he’s based on, he’s definitely a Rory from his first season on the show. The figure features a unique sculpt, though it was shared by all three Rorys. Generally speaking, it’s really not bad. Let’s talk about the sculpt from the neck down first. It’s a nice, sharp sculpt, with lots of nice detail. It’s a bit light on texture, but that’s less of an issue here than it was on, say, the Roman Auton. The figure is generally well proportioned, if perhaps a bit stocky for Rory (though that’s not new for this line).  The head sculpt is, overall, pretty good. It certainly bears more than a passing resemblance to Arthur Darvill, but he seems too full in the face, and the hair is a bit too short for Rory. That said, I’ve seen far worse likenesses. Rory’s paint work is pretty good, if a tad basic. For the body, that’s not too bad. The colors are nice and clean, and everything stays in the appropriate spaces. There’s also some very nice texturing on the figure’s pants, and some decent work on the shoes. The issues begin to arise with the head. It’s clean enough (aside from a spot on his nose), but the eyebrows are a little too clean. There’s also some bleed over along his hairline. None of it’s bad, but it could be a little better. Rory included no accessories.

THE ME HALF OF THE EQUATION

Rory was yet another gift from my Super Awesome Girlfriend Jessica. Rory was one of my favorite characters on the show, and I’m thrilled to have him in figure form. What’s more, the figure is actually a really good figure. For a normal guy in normal clothes, he’s actually a pretty fun figure!

#0443: Ripley – Spacesuit

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

RIPLEY – SPACESUIT

ALIEN REACTION

It’s Day Six of my Christmas Reviews, and they’re moving along strong. Today’s review is the second half of the ReAction review I started yesterday. When you’re dealing with Alien, the two most important characters are the Alien and the lone survivor, Ripley. Yesterday, I looked at the Alien, today I’ll look at Ripley.

THE FIGURE ITSELF

Ripley was released in the second series of Alien ReAction Figures. She’s 3 ¾ inches tall and she features 5 points of articulation. Ripley is presented here in the space suit she wears during her final run-in with the creature. From the neck down, Ripley is identical to Series One’s Kane figure. Since the Nostromo’s space suits were all roughly the same design with different colors, it’s a reasonable re-use of parts. It certainly doesn’t hurt that Kane was my personal favorite figure from the first series, mostly due to his superb sculpt. At first, I thought the head might just be a re-use from the first Ripley, but a closer look shows this is definitely not the same piece. It’s not as good as the first Ripley, but I imagine a large part of that is due to the need for it to fit in the helmet properly.  This results in the figure looking much better with the helmet on, which is the better of the two options, I suppose. It might seem the figure has no paint on the body, but that’s not the case. All of the plating and straps have been painted with a slightly different white, allowing for some distinction between the pieces of the suit. It’s really an impressive effect, and something that could have been left out. The figure’s head features mostly straight forward work, which is fine I suppose. Ripley includes her helmet for her suit, which fits very well. True to the movie, the helmet lacks the head light seen on Kane’s suit, which means they tweaked the helmet at least a little bit.

THE ME HALF OF THE EQUATION

Like the Alien, Ripley was a gift from my amazingly cool parents. While this might not be the most exciting figure that the line has to offer, it does offer Ripley in a fairly key look, and it gives us another figure using the fantastic Space Suit sculpt from Kane. I can’t really fault Funko for wanting to use that body again.

#0442: Alien – Metallic Flesh

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

ALIEN – METALLIC FLESH

ALIEN REACTION

Today marks Day Five of my Christmas Reviews. This review also marks the second review to tie in with the “theme” of my gifts this year: Aliens. Last year, I received the first series of Funko’s Alien ReAction line, which finally brought the unreleased Kenner Alien figures to retail. Almost a year later, Funko finally added a second series, which was made of three new figures and one repaint. So, hey, how about starting with that repaint?

THE FIGURE ITSELF

The Alien is part of the second series of Alien ReAction Figures. The figure is about 4 inches in height and it has 6 points of articulation. As noted in the intro, the Alien is the one straight repaint in this series. From head to toe, this figure’s sculpt is identical to the Alien from the first series. Fortunately, the Alien featured one of the best sculpts from the first series, so it’s not a bad thing. Like I said in my review of the first release of this sculpt, it’s certainly a product of its time, but it represents the best that late 70s sculpting had to offer. Being a repaint, obviously what sets this figure apart from the previous figure is the paint. The last figure was rather basic, and presented the Alien as it would have looked if it really had been released in 1979. This figure opts for a more detailed paint job, and it’s the better for it. Rather than a flat gray, this figure’s base color is a very dark, metallic gray, which is far more in line with the creature’s film appearance. The figure’s dome has been changed from a smoky, semi-transparent piece to a completely clear piece. Underneath of the dome, the head has been given a more intensive paint job, detailing the underlying skull. While this isn’t strictly accurate to the movie, it is accurate to what the suit created for the movie looked like initially. It offers a nice contrast to the last figure, and the cool thing is that the domes can easily swap out, if one were to want a more accurate Alien. The Alien includes no accessories, but that’s no surprise; it’s a larger figure and the previous one didn’t have accessories either.

THE ME HALF OF THE EQUATION

The Alien was another gift from my always amazing parents. He and the other ReAction figure I got (who I’ll be reviewing tomorrow) were actually purchased as a bit of a “backup gift,” just in case the Queen wasn’t there in time. Fortunately, the Queen did arrive, but hey, extra gift! At first glance, this Alien seemed a bit boring, but having it in hand I actually really love the figure. He offers a wonderful improvement to the original figure, and that was a pretty great figure to start with.

#0441: Doctor Who Pandorica Set

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,


UNDERHENGE DALEK, ROMAN AUTON, AMY POND, SONTARAN GENERAL, UNDERHENGE ROMAN AUTON, & DALEK DRONE

DOCTOR WHO

Christmas Reviews continue to merrily chug along today, with entry #4. This one is another venture into the world of Doctor Who, which I am still relatively new to, especially when it comes to toys. Prior to this Christmas, the vast majority of my Who collection has been related to David Tennant’s Tenth Doctor. The one lone exception was Amy Pond, first companion to the Eleventh Doctor. Well, now Amy should be just a tad bit less lonely. Today’s review covers a few of the villains to show up during Matt Smith’s inaugural season of the show.

THE FIGURES THEMSELVES

These six figures were released as a special “Pandorica Set,” based on the final two episodes of the Eleventh Doctor’s first season. Of the six included, only the Underhenge Dalek is actually new to the set. However, this is the first time I’ve seen most of these figures, so I’ll review them as if they were new.

UNDERHENGE DALEK

The Daleks are one of the Doctor’s most recurring foes, and they undergo just as many “regenerations” as he does, if not more. The Dalek figure is a little over 5 inches in height and it features 4 points of articulation, as well as three functioning wheels at the bottom. Both of the Daleks in this set are based on the slightly changed design that first appeared in “Victory of the Daleks.” It’s not my favorite of the Dalek designs; it just seems a bit clunky. This particular Dalek is based on the “Underhenge” look, where one of the Daleks is turned to stone by the Pandorica. It’s the same sculpt as the regular Dalek in this set. The sculpt is certainly accurate to the design from the show, and it features some very nice, very clean work. All of the parts look properly machined, which is good. The figure has been molded in a very dark blue plastic, and a rocky finish has been applied. The paint has purposefully been done so as to leave clumps and such to make the figure appear as if it really has been turned to stone. It’s a solid effect, and it certainly makes the figure unique. The Underhenge Dalek includes no accessories.

ROMAN AUTON

The Roman Autons are probably the most storyline specific of the characters included in this set. They are created by the Pandorica (with a little help from Amy), and they aren’t seen again after the story wraps up. Mostly, they served as an interesting way to bring back Rory. The figure is about 5 inches in height and it has 18 points of articulation. Sadly, it predates the line’s move to better shoulder articulation, greatly limiting the figure’s posing potential. He doesn’t appear to be based on any specific Auton; instead he seems to amalgamate a few of them. It might have been nice if they had given him a Rory head to make this particular release a bit more unique, but it’s okay as is. The sculpt is a pretty nice piece of work. There are a lot of layers to it, and it sums up to look of the characters pretty well. However, it could definitely benefit from a bit more texturing to help spice it up a bit. The cape is a cool touch, and I guess it’s consistent with the rest of the sculpt. The head looks a tad too much like a portly English actor dressed up like a Roman, which makes it a bit difficult to take it seriously. The paint job is one of the shining points of the figure. There are a few spots of slop and bleed over, but nothing too major or distracting. What’s more, the figure feature some wonderful texture work on the armor pieces, which really makes them look like more than just chunks of plastic. The Auton includes a sword and dagger, both of which can be put away in the provided sheaths.

AMY POND

Amy is the one figure in this set that isn’t new to me. This figure is pretty much identical to the single release, which I reviewed a few months back. The one difference that I noted is that the skin tone on this one seems better than the last, which does a fair bit to improve an already good figure.

SONTARAN GENERAL

The Sontarans are another recurring foe of the Doctor, though they’re nowhere near as prominent as the Daleks, or even the Cybermen. Probably the most memorable thing about them as of late is Strax, the Sontaran who began making recurring appearances as one of the Doctor’s companions about halfway through Eleven’s tenure. While this figure is meant to just be a generic Sontaran, the fact that they’re all clones and therefore should look approximately the same means that this figure will be Strax, as far as my shelf is concerned. The Sontaran figure is about 4 ¾ inches tall and has 22 points of articulation. Most of it’s pretty straight forward, aside from the weird ball joint thing they’ve used for his waist. I’m not sure why they didn’t just use the standard cut joint; the end result both looks and moves very oddly. Aside from that, the figure’s sculpt is really quite nice. The head has a wonderful amount of texture and really looks like one of the Sontarans from the show. The body, while not quite as impressive as the head, features some pretty solid work and has its fair share of little details that stand out. The paintwork is about on par with the sculpt; the best work is on the head, but the body isn’t bad either. The Sontaran includes his blaster-staff-thingy and a helmet. Sadly, neither of them is quite as good as they could be. He has trouble holding the staff, and the helmet simply does not fit within his collar.

UNDERHENGE ROMAN AUTON

Like the Dalek, one of the Roman Autons also found himself turned to stone by the Pandorica. Which, of course, translates to another action figure! Like the regular Roman Auton, this figure is about 5 inches tall and he sports 18 points of articulation. Structurally, he’s the same as the regular Auton, except this figure is missing the cape. It actually looks a bit better that way, if I’m honest. Like the Dalek, the Underhenge Roman Auton is molded in a dark blue plastic and has been painted with a rough tan paint. In the Auton’s case, this serves as an improvement to the figure on a few fronts. Most notably, it alleviates the issues of texture with the sculpt. It also helps to mask the somewhat goofy headsculpt and just works to give the figure a lot more character in general. The Underhenge Auton is packed with the same sword and dagger included with the regular version, with the handles done to match the rest of the figure.

DALEK DRONE

So, after looking at the Underhenge version, let’s wrap things up with a look at the standard Dalek from the set. Like the ‘Henge version, this figure is just over 5 inches tall, has 4 points of articulation, and sports three working wheels on the bottom. The Dalek Drone has the same sculpt as the ‘Henge one, but now we’re free to see it more clearly. It really is a very well handled recreation of the Daleks from the show, and all of the parts look just about right. There are a few issues with mold lines being more obvious on this version, but so not bad that it ruins the figure. That paint on this Dalek is certainly more involved than the ‘Henge Dalek, but it’s not quite as well done. The head and “neck” are both extremely well-handled, but from there down, issues start crop up. The worst problem is with the spheres on the lower half. The paint on them is very sloppily applied, and there is more than a little bleed over. Viewed from a distance, it isn’t terrible, but it’s pretty bad at a normal view. The Dalek Drone includes no accessories.

THE ME HALF OF THE EQUATION

The Padorica set was a Christmas gift from my Super Awesome Girlfriend, Jessica (okay, technically from her parents, but she was the one who suggested it, and she’s the one who’s insanely supportive of my hobby, so I’m gonna give her a lot of the credit). I really like this set. The Amy included is a slight improvement on the last, Strax is really cool, and I can’t help but love the Underhenge figures. Seriously, I’d buy an entire line of Who figures done like those two!

#0440: Brainiac

Posted by Ethan Wilson in Reviews and tagged with , , ,

BRAINIAC

DC SUPER FRIENDS (IMAGINEXT)

And now for Christmas Reviews Part Three!

In the current, extremely adult collector driven action figure climate, it can be easy for toy companies to overlook kids, their original target audience. As figures have become more detailed, they have also become more fragile. And that’s to say nothing of the virtually impossible task of getting certain figures. Fortunately, toy companies are starting to catch on, at least a little bit. It’s no secret that I have my issues with Mattel, especially their handling of the DC license, but they aren’t always the worst people on the planet (just most of the time). One of the few places they don’t suck is their Fisher Price division, which handles their Imaginext brand. Imaginext offers a variety of different figures, meant to stand up to younger kids. In recent years, they’ve had a rather nice selection of DC heroes and villains, all offered in the line’s streamlined style. Today, I’ll be looking at the line’s take on Superman foe Brainiac.

THE FIGURE ITSELF

Imaginext doesn’t use the usual “Series” structure of most toylines; instead they have a variety of figures of differing price points and sizes, and they add a few new figures at a time as the line progresses.  Figures are usually sold either in two-packs with other figures or packed in with vehicles. However, Brainiac breaks from this tradition, being released by himself, as something of a deluxe figure. He was introduced into the line in 2014. The figure stands about 3 inches tall and he sports 8 points of articulation (the legs move as one, so just one point there). Brainiac is clearly inspired by his appearance in the DC Animated Universe shows, with a couple of small tweaks; they’ve given him bare arms and his skin is a much greener color. While I still have a soft spot for the classic short-shorts and white go-go boots combo of the 60s, I can’t argue with the choice of design. The DCAU look is definitely a strong one, and it’s probably the most prominent of the character’s appearances in recent years. I’m no expert on Imaginext figures, but Brainac appears to be an all-new sculpt. The figure offers a nice translation of the animated design, and the sculpt is definitely some solid work. Certain details, such as the figures face (apart from the nose), have been left blank on the sculpt. The paint has then been used to bridge the gaps. There are a few areas of slop, but the paint work is generally clean. The best work is definitely on the face, which is nice and clean, and very nicely depicts Brainiac’s cold, calculating mug. Accessories are a rarity among the Imaginext figures, but as a deluxe figure, Brainiac gets a set of robot tendrils, which can be clipped onto his back. While they seem a bit more Doctor Octopus than Brainiac, the character has sported such attachments before, and I certainly won’t complain about extra accessories.

THE ME HALF OF THE EQUATION

Brainiac was another gift from my parents, and he shows how much attention they pay to my never-ceasing ramblings about toys. While walking through Target a few months ago, I saw the figure and off-handedly mentioned that he was rather cool, and boom, here he is. He’s not the first Imaginext figure I’ve owned (I have a few of the Green Lantern-related ones), but, for whatever reason, he’s the first of them to interest me enough to actually open him up and play around with him. Brainiac is a really fun little figure, and he’s the kind of toy that there should be more of.

#0439: Donatello

Posted by Ethan Wilson in Reviews and tagged with , , , ,

DONATELLO

FUNKO POP!

We continue on with the post-Christmas gift reviews today, with #2. While the vast majority of the gifts I received were either Doctor Who or Alien related, there were a few outliers. Today’s review comes from the Teenage Mutant Ninja Turtles, that cultural phenomenon that I keep missing but still have an oddly placed affection for.

This review is also the first time that I’ll be delving into the Funko Pop! line. Pop! is a line of stylized vinyl figures based on a wide gamut of properties (Funko has the rights to virtually every property in existence). There are well over a hundred figures in the line and there are a few different sub-headings (31 to be exact). Today’s figure, Donatello, hails from the Pop! Television line.

THE FIGURE ITSELF

Donatello is figure #60 in the Funko Pop! Television line. Numerically, he’s the first of the four turtle brothers. The figure is roughly 3 inches tall and features a whole one point of articulation. The articulation is limited, but it’s par for the line, and vinyl figures in general. Donatello is based on the character’s appearance in the 1987 cartoon, with the usual Pop! style applied. This means he has the solid circle eyes, the squared-off head, and the exaggerated, smaller lower body all native to the Pop! line. The figure features a completely unique sculpt. It’s pretty good for what we’ve come to expect from the line. The proportions are decent, from an internal stand-point, and it has cleanly sculpted details. It isn’t completely without issue, though. The biggest issue is very definitely the Bo Staff, which has been sculpted as part of the body. It seems the hands weren’t quite sculpted in the right positioning for the staff to fit them, and rather than fix them, the sculptor just sorta bent the staff a bit. It’s really obvious and it makes the figure look rather sloppy. Funko may be really good at getting every license under the sun, but they have yet to figure out the secret to a consistent paint job. Donatello’s isn’t horribly off the mark, to be fair. The colors are nice and vibrant, and they really reflect the color palette of the cartoon version of the character well. That said, they seem to be placed only in the general vicinity of where they should be, leading to a lot of bleed over. There is also a lot of fuzzy line work around the edges. Donatello includes no accessories, which is fairly standard for a Pop! figure.

THE ME HALF OF THE EQUATION

Donatello here was a Christmas gift from my brother Christian. I’ve mentioned before that my fandom of TMNT is shared with Christian, so this gift has much more meaning coming from him than it would anyone else. Plus, it’s my favorite turtle to boot! Funko Pop! isn’t a line I follow religiously, but the style works pretty well for certain characters. The Turtles definitely fit the style well. Donatello is a fun little figure, even with his small assortment of issues.

#0438: The Alien Queen

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ALIEN QUEEN

ALIENS (NECA)

After a bit of a pseudo start yesterday, the Christmas Reviews officially begin today! There was something of a theme to a lot of my Christmas gifts this year, and that them was Aliens. Let’s be honest, though, what better theme could there be? Aliens is, after all, the greatest movie ever made. Today, I’ll be looking at the center piece to all the wonderful Aliens stuff I got this year, the Alien Queen.

The Alien Queen is probably the most distinctive thing from Aliens. Ripley’s Power Loader-aided battle with the beast is one of the best parts of the film, and it’s the kind of thing that a toy collector like me might want to immortalize in plastic. However, the Queen hasn’t been the easiest thing to toy-ify. She’s a pretty massive creature, and she has lots of intricate little details. She’s had a few figures over the years that didn’t totally suck (I even reviewed one of them recently), but none of them quite lived up to the creature seen in the movie. Enter NECA.

NECA has already been killing it with their regular Aliens series based on the normal sized people and creatures from the movie. But if there’s one thing that NECA does well, it’s large scale figures. So, it’s not exactly a shock to see this figure pop up. Still, it took some time. You don’t just start with the Queen; you work your way there. After some waiting, the Queen is finally here! Let’s see how she turned out!

THE FIGURE ITSELF

The Alien Queen was released as a supplement to NECA’s main Aliens line. She found herself bridging the rather lengthy gap between Series 2 and 3 of the line (Although, as chance would have it, Series 3 is right behind her). Officially, the Queen is billed as a “Deluxe Set,” which is not surprising, given the size. Speaking of size, this sucker is big. She’s roughly 12 inches tall and a whopping 27 inches long (though about 15 inches of that is tail). The figure truly towers over the rest of the line, as she well should. The Queen has the sort of design that can be difficult to articulate, but NECA’s done a pretty amazing job. The figure has 57 points of articulation, as well as a wire armature tail that can bend all along its length. There’s quite a lot of posability, though most of the joints require some very particular positioning if you want the figure to have any sort of balance. The Alien Queen has appeared in three films, all of them based on the same basic design, but this one is very definitely based on the original Aliens design. The figure features an all new sculpt to replicate the design. It’s a little hard to tell, because the creature was generally shot in the shadows, but the sculpt appears to be incredibly faithful to the movie. All of the basics are definitely there, and the figure is definitely the Queen. In addition, the sculpt is loaded with lots of fine details and texturing, all done in a way that perfectly conveys the creature’s meld of biology and mechanics. The details continue on every side of the figure. I was particularly impressed by the volume of detail on the underside of the figure’s head, an area that could have easily been overlooked. Perhaps the only downside to the sculpt (which isn’t so much an issue with the sculpt as it is an issue with implementation) is that the Queen’s back spikes are separate pieces that have to be attached when the figure is taken out of the package. It’s a bit difficult to get them in place, and they have a tendency to pop out of place while the figure is being posed. That said, they’re just as well sculpted as the rest of the figure, and the match nicely when in place. Just like it’s difficult to get a 100% accurate view of the figure’s sculpt due to the film’s lighting, it’s also hard to get an accurate comparison of the paint. At first glance it seems like the figure may be too bright, but upon reviewing the film, it seems accurate to what she looks like when we see her properly lit in the airlock. Generally speaking, the paint is very well handled. The figure was originally black, with a fair share of blue highlights added. There are also a few touches of bronze, so that this figure should match okay with both colored varieties of Xeno Warriors. Perhaps my favorite touch, coloring-wise, is the transparent teeth, which are just plain cool! The Queen is a pretty massive figure, so little to no accessories is fairly acceptable. That said, the figure includes a few items. Since the design doesn’t allow for the sliding version of the inner mouth seen on the Warriors, the Queen includes two of them, of differing lengths, which can be swapped out for the desired look. They’re both very nicely sculpted, and help spruce up the figure well. The figure also includes a much needed display stand. It’s done in three parts, and the actually support piece comes in both short and long varieties, which allows for a nice selection of poses.

   

THE ME HALF OF THE EQUATION

The Queen was my main Christmas present from my truly amazing parents, given to me this past year. I have anxiously been waiting for this figure for quite some time. I was absolutely thrilled to open her on Christmas morning. This is a figure that could have turned out badly if it weren’t well handled, but I’m happy to say NECA truly hit it out of the park on this one. It makes for a wonderful centerpiece to my collection. Now I just need to figure out where to put it….

#0437: The Other Doctor

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

THE OTHER DOCTOR

DOCTOR WHO

And let the gift reviews begin! Today’s review is the first of my “Christmas Reviews” so to speak, but it’s not exactly a Christmas gift, for reasons I’ll get into at the end. So, let’s consider this Christmas Review #0.

A year ago, I owned no Doctor Who action figures. In fact, just a few months before that, I’d never seen an episode of Doctor Who. Two things changed that: a) My girlfriend got into it and encouraged me to start watching it, and b) virtually everyone was talking about how cool the 50th anniversary special was. One of the things that intrigued me the most was John Hurt in the role of the “War Doctor;” I’m a fan of John Hurt, largely due to Alien. So, I caught up to the show, and I am now a very definite Whovian. So, in honor of the thing that pulled me into the show, and by extension the toyline, let’s have a look at the War Doctor in toy form!

THE FIGURE ITSELF

The War Doctor, or the “Other Doctor” as he is referred to on the package, was an individual release in the Doctor Who line, meant to capitalize on the 50th Anniversary special. He is notable in that, while he was released after the line’s move to the smaller 3 ¾ inch scale, he was done in the previous 5 inch scale, so he could fit in with the older figures. As such, he is a little under 5 inches tall (Hurt’s not a particularly tall guy), and he features 20 points of articulation. Near as I can tell, the sculpt is all new to this particular figure. It’s really a great sculpt. His jacket is perhaps a little too bulky, but not overly so, and the rest of his body is well-proportioned and has some nice detail work in the folds and textures. The head is pretty much a spitting image of Hurt, which is great. Hurt is notoriously strict about his face being used on merchandise, so this is, I believe, the only official Hurt sculpt to date. They did well on this one. War Doctor’s paint work has its goods and it’s bads. The overall paint work is pretty good,; everything is pretty much clean, and there’s no slop or bleed over to speak of. There some truly tremendous work on the pants and boots, and some exceptional work on the funky pattern on his ascot. It seriously looks like they shrank the real thing down. However, the figure has some seriously goofy looking eyes. They aren’t too bad from a little distance, but up close they look weird. The jacket’s paint is definitely a case of good in theory, but less so in practice. They’ve tried to give it a weathered, broken in look, but the lighter brown is inconsistently applied. It’s really thick some places, but totally absent elsewhere. It’s not terrible, but it’s obviously not the effect they were trying to get. The War Doctor includes his version of the Sonic Screwdriver, the “Moment” accessory from the 50th Anniversary special, and an extra Paul McGann Eighth Doctor head, depicting him from the “Night of the Doctor” short done to lead into “Day of the Doctor.” The head’s a neat enough idea, though Eight never actually wore this getup (though War Doctor did grab the bandolier right after his regeneration).  It’s still a cool idea, though.

THE ME HALF OF THE EQUATION

The War Doctor was a gift from Super Awesome Girlfriend, given to me as an anniversary gift (yep, I got the Anniversary Doctor for our anniversary. She’s a clever one.) “But, wait, Ethan, didn’t you say this was sort of a Christmas Review?” Yes, I did random imaginary reader! See, we’re the crazy sort of people who started dating on Christmas Eve, so, extra present I guess. The War Doctor has a small fault or two, but, overall, he’s a phenomenal figure. They really hit it out of the park with this one.

#0436: I Am Elemental

Posted by Ethan Wilson in Reviews and tagged with , ,

BRAVERY, ENERGY, HONESTY, INDUSTRY, ENTHUSIASM, PERSISTENCE, & FEAR

I AM ELEMENTAL

Advance warning, guys and gals: today’s review is something of a lengthy one. Buckle up.

It’s not often I get the chance to reflect on how this site has affected my toy buying habits, but it’s done its fair share. One of the things the site has done is cause me to be a bit more diverse and adventurous with my buying, just for the sake of keeping things interesting. It’s also led to me to take an interest in new venues for figure-making. One of the biggest new venues is Kickstarter, which has been freaking swarmed with new action figure pitches as of late. The one that pulled me in was I Am Elemental. The pitch for I Am Elemental is fairly simple: action figures for girls. Female action figures and female action figure buyers are both overlooked far too often when it comes to toymakers. Female figures usually end up being totally absent or badly shortpacked. What’s more, the proportions are always way off, and they are often not up to the quality of their male counterparts. I Am Elemental aimed to fix that, offering a line of all female figures, the primary audience of which is girls. I may not be in that particular audience, but I love good action figures, no matter who they’re aimed at, and I’m a huge fan of bringing in new action figure fans!

THE FIGURES THEMSELVES

These figures make up the first series of the I Am Elemental, which is all based around the emotions that add up to Courage. There were a few different options for getting the figures; the one I went for includes a full set of the 7 regular figures, as well as the Kickstarter Exclusive Courage Red Honesty. The figures all came blind bagged (though I was guaranteed a complete set) and they included an activity book, a bracelet to link all of the figures’ shields, and a metal lunchbox that’s meant to be used as a carrying case.

BRAVERY

“Bravery does not shrink from challenge or difficulty. She has the ability to create a protective force-field around herself and others.”  One of the noted inspirations for these figures is Joan of Arc. I think Bravery is the figure with the most Joan of Arc-like elements of the set. She’s 3 ¾ inches tall and she has 15 points of articulation. Waist, wrist, and ankle joints are the most noticeably absent joints on these figures, but I can understand why they aren’t there. Bravery shares her torso, upper arms, and upper legs with all of the figures in this set, her lower legs with Honesty, and her lower arms with Persistence. The basic pieces are all nicely done. One of the selling points of these figures was more realistic proportions, and they definitely succeeded there. There is still a bit of stylization to them, but it’s much more subtly handled. There are a few details on the body, showing etched lines in the armor and such, but overall the sculpt shows a more simplistic style. Bravery’s unique parts are her head and her shoulder armor piece, which slides down over her neck joint. Her head has braided hair, which is very distinctive and is very well detailed. The armor is nice and sharply sculpted, and it does a lot to differentiate her from the others. Bravery’s paint work isn’t perfect, but it’s pretty good. There’s a little bit of bleed over on the edges of the gloves, but everything else is pretty much where it should be. Bravery’s color scheme is pink. I’m not the biggest fan of pink, but it’s used pretty well here, and it’s not an obnoxious shade or anything. Bravery includes a shield with her elemental symbol on it, two character cards, and a small carrying bag with a draw string.

ENERGY

“Energy approaches life with excitement and does not do things half way. She has the ability to control electrical impulses.” Energy is decidedly more modern looking than Bravery. She has the same height and articulation. She also shares the same basic pieces with all of the figures, plus she shares her lower arms with Honesty and Fear and her lower legs are shared with Industry. The lower legs have some big stompy boots (technical term, that) and the arms sport some pointy wrist guards. They’re nicely done, and match up with the rest of the body well. Sadly, my Energy ended up with two left legs, which means she has a little trouble standing and looks a little odd from certain angles. Also a terrible dancer. That said, it’s not so bad that it ruins the figure. Just a bit of an annoyance. Energy has a unique head sculpt, with a really cool asymmetrical haircut, as well as an “energy” add-on piece which sits on her shoulders. Both of these are very nice. I particularly like the cool shapes of the energy. The figure’s paint is better than Bravery. Her color scheme is primarily orange, though she does have purple hair for variety’s sake. Everything is pretty clean, and the orange definitely stands out. She includes the same accessories as Bravery.

HONESTY

“Honesty tells the truth. She has the ability to make others tell the truth.” With Bravery taking a more classic look and Energy taking a more modern one, Honesty finds herself somewhere in between. She’s very definitely got an angelic theme to her, with the wings and the power described on her card. She has the same height and articulation as the others. Her body uses the common pieces shared by all the figures, plus the parts that she shares with Bravery and Energy. She also features a unique head and a set of clip-on wings. The head is nice, though probably one of the more “basic” heads in this assortment. The wings are really cool. Like the rest of the figure, they have an air of simplicity about them, which really works. They also help to make her one of the most distinctive figures in the set. Honesty has some of the best paint work in the set as well. Her primary color is turquoise, which contrasts really well with her red skin tone. All of the lines are clean, and there isn’t any slop, which is good. Honesty includes the same accessory selection as the others in the set.

INDUSTRY

“Industry works hard at all she does. She has the ability to control physical objects and repair anything that is broken.” Industry seems to be the quirky tech person of the set, which is something I can somewhat relate to. She’s the same height and has the same articulation as all the others. The figure is constructed from the base torso, arms, and legs, as well as the lower legs seen on Energy, and a set of lower arms which she shares with Enthusiasm. The lower arms feature fingerless gloves, which are totally the perfect accessory for any self-respecting tech genius. Industry has a unique head which features short hair and a headband, which fits with the practical nature of someone named Industry. Also befitting her practical nature is her backpack piece, which clips over her shoulders, and also gives her some pretty rad shoulder pads (Rob Liefeld would be proud!). The paint is nice and clean on Industry, with minimal slop and bleed over. Her primary color scheme is a pink that is deeper than the one on Bravery. She’s also got an orange skin tone, which makes her stand out a bit from the others. Industry includes the shield, character cards, and small carrying bag that are included with all of other figures.

ENTHUSIASM

“Enthusiasm cultivates and shares a positive mindset. She has the ability to change the negative emotions of others.” Enthusiasm seems to follow in the footsteps of Energy and Industry, sporting a design that is more modern feeling. If I’m honest, she almost feels like a modern upgrade to Bravery, with a similar color scheme, and shoulder armor (but with a newer twist). She uses the same torso, arms and legs as the rest of the figures, with the same lower arms used on Industry. They worked well with Industry’s personality, and they work well here, too. Enthusiasm also features a set of lower legs that she shares with both Persistence and Fear, which feature a set of shin guards (logical addition for someone who doesn’t have time for the negative). For unique pieces, she has her own head sculpt with long hair pulled back into a pony tail with her bangs in her face (also in line with the “no time for the negatives” thing), and a breastplate, which clips down over her shoulders. The head has the most personality of all those in the set; it stands out, in a good way. The ponytail is a separate piece, so it might be nice if it were articulated. Also, the head seems to sit just a touch too high on the neck, but those are minor issues that don’t hold the figure back. Enthusiasm’s color scheme is a mix of light purple and pink, which I actually like a lot more than I thought I would. The paint work is pretty good overall, but there is a little bit of bleed over on the armor’s change from purple to silver. It’s not terrible, but it’s pretty easy to spot if you know it’s there. Enthusiasm sports the same accessories load out as the rest of the set.

PERSISTENCE

“Persistence finishes what she starts and persists in spite of the obstacles. She has the ability to push through any obstacle with super strength.” I Am Elemental has a super hero theme running all throughout it, but Persistence is the one figure to wholeheartedly embrace the idea. There is no denying that she’s a super hero. She’s got the domino mask, the primary colors, the power set, and, above all, the cape. And when you think about it, Persistence is the perfect emotion for super hero-ing. Persistence is constructed with the basic parts used for all of the figures, along with the lower arms seen on Bravery, and the lower legs from Enthusiasm. She has a unique head, which has medium length hair (great for heroics), and the aforementioned cape. The cape has a slight windblown effect to it, which gives the figure a nice dynamic look that I really like. Persistence’s color scheme is predominantly a light blue, befitting her super hero look. All of the paint is applied nicely and cleanly, and the color is nice and bold. Persistence includes the same selection of accessories featured with the rest of the figures.

FEAR

“Fear spreads the impulse to pull away and hide. She has the ability to stop a moving object in its tracks.” Fear is probably the most unique of the figures in the set. She represents the only “negative” emotion in the bunch, and she has a much darker overall color scheme. However, the character’s description on her card indicates that she’s meant to be more of a “dark hero,” which is a pretty cool. Fear is important to Courage, so it makes sense. The figure makes use of the base body, with the lower arms seen on Energy and Honesty, and the lower legs from Enthusiasm and Persistence. She has a unique head sculpt, notable in that it’s the only one to have a helmet. The helmet has a neat serpentine style to it, which makes sense with the fear motif. She also has an armor piece, which sits on her shoulders. The piece is pointy and looks just right for Fear. Fear’s color scheme is much darker than the others. Her primary color is a very dark purple, and even the silver of the body is a much darker shade. The paint work is nice and cleanly done, with no issues with slop or bleed over. Fear has the same accessories as all the others, plus an additional fear spirit thingy, which continues the serpentine theme of the helmet.

COURAGE RED HONESTY

As an extra incentive to the Kickstarter supporters, the makers of I Am Elemental threw in an extra figure, done in “Courage Red,” signifying the overall theme of Series 1. They allowed fans to vote on which of the seven figures would receive the Courage treatment, and the vote went to Honesty. Structurally, the figure is identical to the regular Honesty. The difference between the two is that, instead of the silver body suit of the regular figure, this one has a red one. The red is a deep red, and it’s done in a nice metallic sheen. It’s a subtle change from the regular version, but it’s a nice one. I actually don’t know which one I prefer.

THE ME HALF OF THE EQUATION

I Am Elemental is my first venture into the world of Kickstarter, and they’ve done a tremendous job of getting me hooked. When I came across the idea, I was immediately drawn to it. I’m definitely a supporter of the idea behind the figures, for a plethora of reasons. And above all, I’m a sucker for cool action figures. In all honesty, these are some of the coolest figures I’ve seen in quite some time. Every single figure practically radiates with evidence of the care and enjoyment put into them. They call back to a time when toys really were designed with kids in mind, and I think they are a huge step towards making action figures a viable thing again. And they’re just so much fun!

#0435: Data

Posted by Ethan Wilson in Reviews and tagged with , , , ,

DATA

STAR TREK: THE NEXT GENERATION (PLAYMATES)

Following its presence at Mego in the late 70s, the Star Trek license struggled to find a home. Most of the movies didn’t get a dedicated toyline (aside from a very strange offering of figures by Ertl, based on Star Trek III). Galoob held the license for two short series based on Next Generation, but a third never materialized. Then, with the release of Generations, Playmates, best known for their definitive work with Teenage Mutant Ninja Turtles, picked up the license, and provided the largest selection of Trek characters that is ever likely to be offered. After having decent success with Generations, they moved on to figures based on the entirety of Next Generation.  Today, I’ll be looking at their second take on Data.

THE FIGURE ITSELF

Data was released in the first series of Star Trek: The Next Generation figures. Following the one offered in the Generations line, this is the second figure of the character that Playmates offered. Data is based on his appearance in the middle seasons of the show, after the uniform had evolved a bit. The figure is just shy of 5 inches tall and he features 14 points of articulation.  As far as I can tell, Data’s sculpt is unique to him. It’s possible that he may share one or two parts with some of the other crew members, but I don’t have any to compare. For the time, it’s a pretty good sculpt. It’s simple, but not in a bad way. The Brent Spiner likeness is good. The proportions are a bit off, though; he’s definitely got a case of the monkey arms. The sculpt of his right arm is also disrupted by the addition of the flip up panel to reveal his inner workings, but that’s a cool enough feature that it’s worth it. The figure also featured a bulky phaser holster on his leg, but that could easily be removed, leaving a mostly unnoticeable peg-hole on his leg. Data’s paint is pretty decent, and it’s certainly good by early 90s standards. Everything is clean and well applied. A slightly less shiny finish would have been nice, but that’s another “true to the time” thing. Most of my Data’s accessories have been lost, but I’m pretty sure he had a phaser, a tri-corder, and a stand. The phaser is rather laughable because it had a molded beam that wasn’t removable, meaning the holster was pretty much useless, and he was left with this lightsaber looking thing. To make matters worse, he can’t even hold it properly!

THE ME HALF OF THE EQUATION

This figure was the third version of Data I ever got. It was a figure I had wanted for a while, mostly because I really liked that flip up panel on his arm (I’m easy to please). I ended up getting him from one of the toy dealers at Shoreleave, for $5, I believe. This figure actually got me into a little bit of trouble, because I went down to the Dealer’s Room without my parents’ permission (I was like 7, and they were very much in the right on being mad. Shoreleave’s Dealer’s Room is no place for a lone 7 year old). Some kid’s sneak out to go to parties, I snuck out to buy action figures. There was no way I was escaping this lifestyle…