Author Archives: Ethan Wilson

#0434: Garrus

Posted by Ethan Wilson in Reviews and tagged with , , ,

GARRUS

MASS EFFECT MINIMATES

Part two of my short venture into the world of video games is today. Ha ha! Okay, so today, I’m looking at another Mass Effect character, Garrus. While I have a pretty decent understanding of Tali, I actually don’t know a whole lot about Garrus. I have been informed by both Tim and Super Awesome Girlfriend that he’s a pretty legit character, so I’m gonna trust them on that. Let’s see how the ‘mate turned out!

THE FIGURE ITSELF

Garrus is part of the first series of Mass Effect Minimates, which are blind bagged and exclusive to GameStop. Those are not two of my favorite things, but I’m willing to do a lot for Minimates, my best friend and my girlfriend. The figures is roughly 2 ½ inches in height and he features 12 points of articulation. According to Tim and SAGF, Garrus is based on his appearance in the second and third Mass Effect games, which is apparently denoted by his scar. So there. It’s a pretty good design, and, like Tali, it translates nicely to the Minimate form. He makes use of the standard Minimate body, with non-standard pieces for his head and lower legs, as well as an add-on piece for his torso armor. All of the parts are new to Garrus. They’re well sculpted and look like they’re pretty accurate to the source material. The torso armor is just a tad soft on the details, but nothing too terrible. The head also has an extra little piece glued on for his eye-thingy, which is pretty neat, although it doesn’t quite make it to his eye. Garrus’s paint is somewhat mixed. The detail lines are nice and clean, and the paint for his face is downright fantastic. However, the base paint, especially on his torso armor, is really sloppy and frequently misses its mark, which is rather unfortunate. Garrus includes a sniper rifle (which appears to be a new piece) and a clear display stand.

THE ME HALF OF THE EQUATION

Hey, so remember how I bought ten Mass Effect Minimates and six of them ended up being Tali? Yeah, the next three ended up being ol’ Garrus here. So, that means I got a Garrus to keep for myself. Despite my lack of knowledge about the character, I must admit that Garrus sports a really cool design and he translated very nicely to the Minimate style. The paint could stand to be better, but I think Garrus makes for a really great addition to my Minimate legion. I hadn’t really intended to get my own Mass Effect Minimates, but if I was going to get two, I think Garrus and Tali are those two, so I’m actually pretty happy with how things ended up.

#0433: Tali

Posted by Ethan Wilson in Reviews and tagged with , , ,

TALI

MASS EFFECT MINIMATES

Okay, so I don’t generally get into the video game stuff much on this site. Sure, I play the occasional game here and there (though mostly just the LEGO stuff), but when it comes to video game action figures, I usually leave it to Tim and Christian to provide coverage. However, there’s one exception to that rule: Minimates. I will buy practically anything if it’s a Minimate. Heck, I watched the Kill Bill movies as an excuse to buy the Minimates. Recently, DST has picked up the license to do Minimates based on the Mass Effect series of games. I’ve never played the games, but I’ve watched other people play them, and I have to admit they have some pretty cool designs. I’ve gotten two of them so far. Let’s kick things off with Tali, one of the few characters I actually know a little bit about.

THE FIGURE ITSELF

Tali was released in the first series of Mass Effect Minimates. They are blind bagged and exclusive to GameStop. If I didn’t have an irrational love of Minimates (and a few other driving forces I’ll get to later), I probably would have gone through the ordeal of getting them.  The figure is about 2 ½ inches tall and she sports 12 points of articulation. I’m not an expert on the changes to the characters from game to game, so I don’t know which of the three Tali was based on. If I had to hazard a guess, I’d say she’s based on the third one. Tali makes use of the standard Minimate body, with a non-standard set of lower legs, plus add-ons for the belt/skirt, mask/hood, and wrist-energy-thingy (it’s a technical term). All of the pieces are brand new to Tali and they do a great job of translating her look to the Minimate form. They also exhibit some very nice detail work and just mesh very well with the base body in general. Tali’s paint, while not exceptional, is pretty decent. She has a little bit of slop with some of the base paint. However, the colors seem well suited to the character and the detail lines are not only plentiful, but also clean and sharp. Perhaps one of the coolest touches is the eyes that have been placed on the otherwise undetailed clear purple head. The visor of her mask is cast in the same purple plastic, which allows just the faintest hint of her eyes to show through. It’s a really cool effect. Tali includes a small blaster pistol-thingy and a clear display stand.

THE ME HALF OF THE EQUATION

So, story time. Both my best friend Tim and my Super Awesome Girlfriend Jessica are pretty big fans of Mass Effect. So, when this line was announced, I knew I’d need to track down a few figures for both of them. GameStop is not a store I typically like to venture into, so I resorted to ordering as many blind bagged figures as I could online. That ended up being ten. There are eight figures in the set, so I figured I’d piece together one set for Jess and give the rest to Tim. When they arrived, I was hopeful that there would be two Talis in the bunch, since Tali is Tim’s favorite character, and I wanted to make sure he and Jess both got one. I opened the first bag and it was Tali. Good start. The second was also Tali. Great, now they both get one. Then the third was Tali. Well, I like Tali enough, so I don’t mind having one. Then, the fourth, fifth, and sixth bags were also Tali. Six of the ten I’d ordered were same character. What are the odds? Ah well, Tali’s a pretty good figure. I actually quite like the design and I think it translates well to Minimates. Plus, who doesn’t want an army of Talis?

#0432: Time Traveler

Posted by Ethan Wilson in Reviews and tagged with , , ,

TIME TRAVELER

MICRONAUTS (MEGO)

It might seem odd that I, someone born 15 years after the line’s release, would be such a big fan of Micronauts. Like with so many things, I blame my dad. I used to stay at my grandparents’ house a lot when I was younger, and he pulled out some of his old toys for me to play with while I was there. My interest in superheroes, Star Wars, and Star Trek can pretty much be directly tied to that. However, there was one figure in particular that intrigued me. Only his top remained, but he was translucent yellow and he had this really cool chrome head. He was a Time Traveler, generally considered the signature figure of the Micronauts line. And thus, a monster was born.

THE FIGURE ITSELF

The Time Traveler actually saw two separate releases in Mego’s Micronauts line. This is one of the ones released in the first series of figures. It’s easy to distinguish: the original releases were all translucent, while the later ones were opaque. The Time Traveler was initially released in four colors: Clear, Yellow, Orange, and Blue. This one is the blue one. The Time Traveler is roughly 3 ¾ inches in height and he features 18 points of articulation. Unlike his space-faring friend, the Time Traveler is all plastic. The Time Traveler was based on Microman’s Microman M10X, although he has shoes in place of the M10X’s bare feet. That’s just how we roll in America, I guess. Like the Space Glider, the sculpt shows its age, but it definitely has a certain charm about it. The Time Traveler is definitely the more simplistic of the two, but his sculpt is still pretty fun. His chrome chest plate is a removable piece, and there were four possible variations of it. This figure has what is commonly called the “radio dial” plate, due to its resemblance of an old-time radio. It’s not my favorite of the possible options, but it’s still pretty good. Plus, chrome, so…you know. The Time Traveler actually features no paint work. His head and chest plate are vac-metalized, and the rest of his parts are molded in the appropriate colors. The figure originally included an L-port which could hook into his back to allow him to be attached to vehicles, but mine doesn’t have this piece.

THE ME HALF OF THE EQUATION

Like the Space Glider, the Time Traveler was purchased from the Antique Depot during Ellicott City’s annual Midnight Madness event. The Space Glider’s my favorite, but the Time Traveler is old faithful when it comes to Micronauts. The figure has a definite style about him and he’s instantly distinctive.

#0431: Space Glider

Posted by Ethan Wilson in Reviews and tagged with , , ,

SPACE GLIDER

MICRONAUTS (MEGO)

So, yes, it’s the day after Christmas, and yes, I have tons of new toys to review.  However, I am away from my usual photo shooting set-up, so the Christmas stuff won’t actually be reviewed until the 31st.  Bear with me.  In the mean time, here’s our regularly scheduled programming!

One line that I am surprised I haven’t talked about more on this site is Micronauts. Before I was firmly on the Minimates train, there were few lines that filled me with as much joy as Micronauts. For those of you that don’t know, Micronauts began its life as a Japanese toyline called Henshin Cyborg, which were actually the Japanese equivalent of the original GI Joes. Toymaker Takara decided to make a line of smaller scale figures, called Microman. In 1976, US toymaker Mego decided to import the line under the title Micronauts. The figures are some of the earliest 3 ¾ inch figures, and they ended up having quite a few lasting contributions to toys in general, even if the Micronauts themselves may not be as widely remembered. Today, I’ll be taking a look at one of the line’s heroic characters, the Space Glider!

THE FIGURE ITSELF

The Space Glider was released in the first series of Mego’s Micronauts line. He was available in three different colors: Blue, Green, and Yellow. In case you couldn’t tell from the pictures, the one being reviewed is blue. The Space Glider is about 3 ¾ inches tall and he has 16 points of articulation. It’s also worth noting that, aside from the head and hands, the whole figure is made from die cast metal. It means the figure is pretty darn sturdy, and he has quite a bit of heft to him. Space Glider was an import of the Super Steel Microman M21X, from the Microman line. His sculpt is essentially the same. While the sculpt does show its age a bit, it’s certainly well done for the time. The torso and arms have lots of hard angles, which look really good. His head is a great, generic “70s space hero” look, although the vac-metalizing has made some of the details a little soft. This figure has some definite style to it, which really makes it stand out. The paint work on the Space Glider is fairly basic, but well done. All of the blue areas are done with a very nice metallic sheen, and the color is nice and evenly applied. Everything else is pretty much just molded in the proper color, but it looks good. The Space Glider included a helmet and a wingpack, both of which are sadly missing from mine.

THE ME HALF OF THE EQUATION

I got the Space Glider from the Antique Depot, an antique store not far from where I live. I saw him while walking through during Ellicott City’s annual Midnight Madness event. The Space Glider has long been my favorite of Micronauts figure, but I had never had one of the originals. With some light prodding from my friends Tim and Jill, I purchased the figure. The Space Glider really holds up. He’s a really strong figure, and he’s just a lot of fun!

#0430: Santa Claus

Posted by Ethan Wilson in Reviews and tagged with , , ,

SANTA CLAUS

LEGO MINIFIGURES

Hey, it’s Christmas, which happens to be my winter holiday of choice. But, let’s be all inclusive with the holiday wishes: Merry Christmas, Happy Hanukkah, Joyous Kwanzaa, Happy Yule, Happy Festivus, and in general Happy Holidays! Hopefully I didn’t leave anyone out, but feel free to leave snarky (or even non-snarky) comments if I did. So, how about something festive to review?

I’ll be digging into my LEGO Minifigures collection again, looking at another Christmas-themed minifigure. This time, it’s the big man himself, Santa Claus!

THE FIGURE ITSELF

Old Saint Nick is the 10th figure in the 8th series of LEGO Minifigures. Santa is about 2 inches tall and he features 7 points of articulation. The figure is, of course, based on the classic Santa Claus look (which was actually created by Coca Cola, by the way). Santa’s built on the usual LEGO body, with additional pieces for the hat and beard. The LEGO body is a standard, so no problems there. The beard is piece that’s seen use a few times, and a couple of them have even been for previous Santas. The hat looks to be a new piece, and a well done one at that. It’s a pretty straight forward Santa hat, and it works really well. Santa is molded mostly in red, with white for the hands and yellow for the head. There is paint on the front of the head and the torso. Some of the more recent LEGO Minifigures have detailing that goes around the torso, but that’s not the case here. It’s worth noting that there is a full face under the beard, which is a nice touch. Santa has a big grin that pretty much no one’s gonna see, unless you’re one of those weird people that prefers him clean shaven, which is just a bit strange. Santa includes a bag of toys and a display stand. The bag is a new piece and it fits nicely in his hand.

THE ME HALF OF THE EQUATION

I honestly don’t remember where I got this one. Going by my records, it’s the only Minfigure I have from Series 8. I know I didn’t pick him up on purpose, so I must have just grabbed a single blind bag at random. He’s not a bad Minifigure, though he’s not the most thrilling figure the line has offered. Man, I can’t believe I don’t remember where I got this figure….

#0429: Infinity Minimates

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SPACE SUIT CAPTAIN AMERICA, ARMORED HULK, INFINITY THANOS, & THANE

MARVEL MINIMATES

Marvel Minimates is really just the line that keeps on giving. I have a pretty substantial back log of figures I already had before the site was started, so they were already going to show up a lot. However, they also provide new releases on a very regular basis. Which makes for even more frequent reviews. Yay.

Marvel Minimates is also one of the few Minimates lines to be fairly consistently supported by Toys R Us. TRU has carried 18 of their own exclusive series of the line. In addition, they’ve offered fans the opportunity to influence the line a bit with Fan’s Choice boxed sets based on certain events. Today, I’ll be looking at the most recent of those sets, based on last year’s Infinity cross-over. Full disclosure: I haven’t read any of Infinity, so I can’t really speak to any story specific stuff. I know the general gist of it, and I know who the one storyline specific figure in this set is.

THE FIGURES THEMSELVES

These four were released as part of a Toys R Us exclusive four-pack. The line-up was chosen via a poll on Toys R Us’s website. There were two other figures, Ronan the Accuser and Space Suit Iron Man, who did not make the cut for this set, but will be appearing in the TRU Series 19.

SPACE SUIT CAPTAIN AMERICA

There have been a fair number of Captain America ‘mates, especially recently, but this is the first time he’s been space worthy. It’s also the third ‘mate based on Cap’s Marvel Now! appearance. Cap’s clearly the “safe” figure in this set, but that’s not necessarily a bad thing. The figure is about 2 ½ inches tall and he sports 14 points of articulation. He’s based on Cap’s space-faring look from Infinity, which I understand is the look he had for most of the story. It’s basically just a tweak on his regular Now! design and it looks pretty good. The figure makes use of the standard Minimate body, with non-standard upper arms and hands, as well as add-ons for his helmet and space-y web gear. The hands and helmet hail from the previous two Now! Caps, which is a sensible re-use. They’re well-sculpted pieces that are accurate to the source material, so it’s a win-win. The upper arms originally appeared on the Series 49 Mark 42. They aren’t quite as warranted as the hands and helmet, but they’re reasonable enough as a generic set of tech-y arms. The web gear is the only really new piece present. It’s well enough sculpted, and it seems to be pretty accurate to the source material. It’s not the most exciting piece, but it does its job. Cap’s paint work is pretty decent. For the most part, everything is clean, and the details are sharp. However, the paint on the helmet/head is applied in such a way that is impossible for me to get the helmet off his head, which is rather annoying. Cap includes his mighty shield and a hand wield said shield (both reused from the previous Now! figures), as well as a hair piece (also from the Now! Cap), and a clear display stand. The shield is a bit sloppy paint-wise, and the hair is ultimately not very useful due to the issues with the helmet.

ARMORED HULK

Hulk here is a bit less space-ready than the Cap figure. As the name implies, he’s just an armored version of the character. The figure is over 2 ½ inches tall, closer to the 3 inch mark, and he features 12 points of articulation. He’s based on the character’s Now! look. This is the second Minimate based on the look, but the first one was more armor-lite. This is what the character’s looked like for most of the Now! run. The figure is built on the basic Minimate body, with non-standard pieces for the hands and feet, as well as add-ons for the hair, torso, upper arms, waist, torso extender, and upper legs. The hair and upper arms first cropped up on the Series 41 Mega Rage Hulk, the feet first appeared on TRU’s Hulk as Nul, the hands are from the Hulk TTA Maestro, and the torso extender, waist cover, and upper legs are from the TRU 16 Now! Hulk. The chest piece is the only truly new part, however it’s nicely handled. The reused pieces are used a such a way that it wasn’t immediately obvious that the torso was the only new part, which is a sign of good re-use. The shift from sculpted detail lines on the armor on the torso and upper legs to painted on the feet is a little bit jarring at first, but it’s not too bad. Hulk’s paint alright, but it could be better. There’s some bleed over on the transitions from armor to skin, and there’s some pretty bad slop on the back of the figure’s head and torso. The figure also suffers from the same stuck pieces that plagued Cap, something that is a common theme in this set. Hulk includes a clear display stand.

INFINITY THANOS

Thanos here is probably the biggest draw of this set. This is the third version of Thanos in the Marvel Minimates line, but it’s been five years since his last figure. If you’re a faithful follower of my reviews, you’ll recall I didn’t think the last one was very good. Plus, he’s set to be a major player in the Marvel Cinematic Universe in the next few years, so it’s really good timing. Thanos is the largest ‘mate in the set, coming in at just shy of 3 inches tall, and he has 12 points of articulation. He’s based on Thanos’s recent redesign from Infinity. It’s not far off from his original design, but there are a few differences in the execution of some of the details. Thanos uses the basic Minimate body as a starting point, with non-standard hands and feet, as well as add-ons for his helmet, torso, upper arms, waist, torso extender, and upper legs. The upper arms and legs are from the Series 41 Hulk, the extender is from the TRU 16 Hulk, and the waist cover is from a whole bunch of Minimates (I’m not sure who used it first). The helmet, torso cover, hands, and feet are new to Thanos, and they’re pretty good overall. The torso is probably the best piece. It has a lot of ornate detail work that looks really good. The hands and feet are decent, though they seem a little too rounded. The helmet is good in theory, but not quite in practice. It’s well sculpted, but it sits too low on the head, which obscures a lot of the details on the face. Thanos’s paintwork is pretty clean overall. There are a few spots with some bleed over, but most of it’s pretty sharp. The face in particular looks really good, and it definitely improves on the last one. Unfortunately, Thanos was not exempt from the stuck paint issues. His helmet was practically glued on when I got him and took quite a bit of effort to remove. Thanos includes a clear display stand. It would have been nice to get an Infinity Gauntlet that matched this figure, but since it wasn’t in the story, I can understand its absence here.

THANE

Hooo boy, Thane. This guy. So, Thane is the one new character in the set. He’s also new to the storyline, and he has a sort of important role, so I guess his inclusion makes sense. In case you were unaware, Thane is Thanos’s son and he’s half Inhuman, which sort of makes him a bit of a mess. The figure is about 2 ½ inches tall and has 14 points of articulation. Thane is based on the character’s appearance post-Terrigen Mist exposure, which is notably Thanos-inspired. It’s an okay design, though not particularly thrilling. The figure is mostly a “vanilla ‘mate” with his only unique piece being his left hand. This piece is re-used from the DC Minimates Series 6 Cheetah figure. It’s a pretty standard clawed-hand, so that’s good. The rest of Thane’s detail is done with paint. For better or worse, Thane exhibits the best paintwork of the lot. The base colors are clean and even, the colors are pretty bold, and the detail lines are nice and sharp. Thane didn’t have any issues with stuck pieced due to paint, although that’s likely due to his lack of add-ons. The figure includes a clear display stand.

THE ME HALF OF THE EQUATION

I found this set while killing some time during one of my brother’s rehearsals. Obviously, I got it from Toys R Us, it being an exclusive and all. I did participate in the vote on this one, and three of the four I voted for are in the final set, so I guess that’s cool. Unfortunately, Ronan, the one I wanted the most, lost out to Thane, which is a bummer. Guess I’ll have to wait for TRU 19. All in all it’s a pretty good set. Cap and Hulk are fun variants and Thanos offers some nice improvements to the last one. Thane is good on a technical level, but sadly neither the character nor his design is particularly exciting.  But hey, three out of four ain’t bad!

#0428: Mr. Freeze

Posted by Ethan Wilson in Reviews and tagged with , , ,

MR. FREEZE

BATMAN: THE ANIMATED SERIES (DC COLLECTIBLES)

DC Collectibles (formerly DC Direct) has made quite a splash in the collecting world with their new line of figures based on the much-loved Batman: The Animated Series. Toylines were something of a different beast at the time of the cartoon’s release. BTAS actually had one of the better lines of the time, but the figures were severely lacking in articulation and were often off model in order to facilitate action features and a smaller-scale toy budget. DC Collectibles’ line looks to be giving the characters the proper high quality treatment they deserve.

When it came to BTAS, there were few characters who benefited from the show’s new takes on the Bat-Rogues Gallery more than Mr. Freeze (formerly Mr. Zero). The show took the character from one-note villain to compelling and tragic anti-villain in the course of 22 minutes. So, it’s only fitting that Freeze would be one of the first four figures in DCC’s line.

THE FIGURE ITSELF

Mr. Freeze is part of DC Collectibles’ first series of Batman: The Animate Series line. The series ended up not really being a strict “series” as it were, as the four figures ended up being released separately. Freeze here was released along with Two-Face. He’s figure 03 in the line, following Batman’s 01 and Catwoman’s 02. The figure is just a hair over 6 inches tall (making him just a little taller than Batman, which is accurate) and he has 26 points of articulation. Freeze is based on his re-design from the New Adventures era of the show, which was actually one of the more radical re-designs. It’s a pretty sharp design, though it’s a little marred by the fact that it’s only cartoon appearance is the mediocre “Cold Comfort.” Still, the design is sharp, and starting with this one means they can hook people for the inevitable “Heart of Ice” version. Like Batman, Freeze sports an all-new sculpt. It’s a near perfect rendition of the design from the show. All of the details are smooth and symmetrical, and he really looks like the character would in three dimensions. They’ve done a great job working the articulation into the sculpt pretty seamlessly, allowing for a fair bit of movement without marring the design itself. The head dome is perfectly symmetrical and, it should be noted, removable. This allows this version of Freeze to be the first animated Mr. Freeze to sport neck articulation. How cool is that? For Batman, paint was the area where the figure really took a hit. While the paint on Freeze isn’t quite as good as it could be, it’s definitely an improvement. He still has a few spots of bleed over, and the flat black leads to some issues with scuffing. The blue used seems a bit off; I think there’s too much yellow in it. Of course it may just be that I’m used to the metallic blue from the Kenner figure. It’s hard to tell comparing this figure to the show. Freeze includes 6 hands (the pair of fists he comes wearing, a pair of relaxed hands, a gripping right hand, and a semi-gripping left hand), his trusty freeze gun, and a display stand with his character design sheet. They’ve already changed the nature of the clasp that holds the figure in place since the Batman figure, and I can’t say I’m a fan of the new design. It sticks out too far in the back. In addition to all that, Freeze also includes four mechanical spider-legs, which can be plugged into the bottom of his head, allowing for his…umm…head on spider-legs look. The legs are kind of a pain to get in, and the plastic is sort of soft, leading to some stress-marks (which you can see on mine). It’s a nice touch, and kind of essential to this version of the character (even if I don’t particularly care for the whole “he’s just a head now” thing).

 

THE ME HALF OF THE EQUATION

Mr. Freeze was another purchase from Cosmic Comix. Unlike Batman, I never needed any convincing on this guy. I’ve been on board for him since the day he was announced. Freeze was always my favorite of the animated rogues gallery, mostly due to “Heart of Ice” easily being my favorite episode of the show (getting to meet Michael Ansara when I was a kid may have contributed to that just a bit too). While I still want a BTAS Freeze, this one’s a really strong figure of a pretty great design. He looks fantastic next to Batman, and I can’t wait to get the rest of this series. It’s really fun!

#0427: DOFP Wolverine & Colossus

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

DAYS OF FUTURE PAST WOLVERINE & COLOSSUS

MARVEL MINIMATES

Marvel Minimates has pretty consistently been the flagship of the Minimates brand, but it hasn’t been without its dark periods. Every fan has their own personal preferences, which means that where exactly the low points of the line lie can vary from person to person, but pretty much everyone agrees that Series 12 and 13 are probably the worst the line ever got. It’s no coincidence that immediately after those two series, the line started taking quick strides in innovation. The line looked like it was on its last legs (Series 15, set to be released not long after, is the only specialty assortment in the history of the line to be cancelled), and something had to change. Fortunately, the line did change, and it has continued for almost another 50 series, but man, somewhere there’s an alternate universe where these were the last Minimates we ever saw.

THE FIGURES THEMSELVES

These two were released as part of Series 13 of Marvel Minimates. The series was based around the then current Astonishing X-Men. This is the variant set, which swapped out a “Days of Future Past” styled Wolverine in place of the regular Astonishing one.

DAYS OF FUTURE PAST WOLVERINE

Or, as he’s known on the box “DOFP Wolverine.” I mean, I know what that stands for, but you’ve got to imagine that somebody stood there looking at the box wondering what the heck a “Dofp” was. I just recently looked at the new and improved take on this design from earlier this year, which I quite liked. This one is….different. The figure is about 2 ½ inches tall and he features 14 points of articulation. He made use of the standard Minimate body, with the then standard Wolverine claws in place of the normal hands, as well as an add-on piece for the hair. The piece, like every piece in this series, is a re-use, in this case from the Series 6 New Wolverine. What’s interesting is that the box actually shows the figure with the hair from the Series 3 Logan figure, which is a superior piece. Not sure why they made the change. Paint-wise, this is a pretty drab figure. I know the design isn’t the most vibrant to begin with, but there’s just no pop with this figure. The choice to make the jacket painted on robs the figure of a lot of dimension, and the jacket’s detailing is sub-par at best. I’m not exactly sure what the deal is with the face, either. He looks like he’s been… smooshed or something. And that’s not even starting on the whole double chin thing he’s got going. DOFP Wolverine had no accessories.

COLOSSUS

Colossus’s return to life was an important part of the early Astonishing X-Men, so his place in this series isn’t too surprising. Plus, his history with Wolverine and his decent sized role in the original “Days of Future Past” make this pairing a pretty great one too. Colossus is roughly 2 ½ inches tall and he has 14 points of articulation. He’s based on Colossus’s look in Astonishing, which is just a slight tweak on his classic design, so it’s a reasonable look. The figure uses the basic body, with an add-on for the hair. The hair is a re-use from the Giant-Size X-Men boxed Set Colossus. It’s a pretty cut and dry case of “if it ain’t broke, don’t fix it,” so it works nicely for the character. The lack of any other add-ons means that he’s a rather scrawny looking version of the character, which other versions have avoided. Colossus’s paint is at least a bit better than Wolverine. His colors are pretty good, though the red might be a touch too bright for this look. The detail lines are pretty nice, though not as sharp as they could be in a few areas. The choice to put the belt on the torso makes the waist seem too long, but at least it’s nicely rendered. Colossus included no accessories.

THE ME HALF OF THE EQUATION

I picked up this set from a friend’s local comicbook store during a black Friday sale. I’m pretty sure I got it for slightly less than retail, which is probably a good thing. It was actually the first variant set I was able to track down, which is unfortunate to say the least. All in all, it’s not the worst set ever, but it’s one that’s seriously lacking. It’s fortunate that the line was able to move past this series and become better and more successful.

#0426: Jonathan Barnet & Nukpana

Posted by Ethan Wilson in Reviews and tagged with , ,

JONATHAN BARNET & NUKPANA

CALICO JACK MINIMATES

A few years ago, when Diamond was first starting to push Minimates as a brand with some serious legs, they decided to move beyond just releasing licensed product. They had some pretty significant success with their MAX Elite Heroes line, which offered generic police officers, firefighters, and divers, so they moved on to some more experimental lines, such as Calico Jack, a line of pirates. The line was a lot of fun, but it never really took off, sadly. Today, I’ll be looking at the two of the line’s figures, Jonathan Barnet & Nukpana.

THE FIGURES THEMSELVES

These two were released as a two-pack in the first (and only) series of Calico Jack Minimates, which were carried exclusively at Toys R Us.

JONATHAN BARNET

“Captain Jonathan Barnet, commander of the British Navy’s Man-O-War Albion, is a very formidable seaman and pirate hunter. Coming from a very well to do family, Captain Barnet holds tradition and the Crown in very high regard. He finds his time with Jack to be very distasteful.” Barnet is a take on the straight-laced Navy men that crop up a lot in Pirate stories (like a certain Admiral Norrington from a certain Disney movie). The figure is about 2 ½ inches in height and he features 12 points of articulation. He’s built on the standard Minimate body, with a special set of feet, as well as add-ons for his hat, coat/cape, and gloves. The boots first saw use on the Marvel Minimates Dark Avengers Ares figure, and the gloves showed up in the Captain America Through the Ages Set. The other pieces are new to this figure, and they are really impressive. There’s some very nice, ornate work, and it looks great. The figure’s paintwork is pretty good. The only detail line work is on the face, which has pretty much the perfect look for the uptight naval officer. The rest of the paint is basic color work, which is all pretty good. There’s some slop and a few fuzzy lines, but nothing too distracting. The figure was accessorized with a sword and a pistol, which are both very nicely sculpted.

NUKPANA

“Nukpana is one of Captain Jonathan Barnet’s crew. The struggle against the pirate plague has been a long and deadly affair and one that at times requires a special skill set. Nakpana came to Britain via the new Colonies…” Nukpana is a cool looking character, who seems to be based on characters like Ishmael and the like (though he’s technically Native American). He’s roughly 2 ½ inches tall and he has 12 points of articulation. The figure uses the standard body, with a unique set of feet and a blade in place of his right hand, as well as add-ons for his loincloth, hair, and left wrist guard. All of these pieces are new to this figure and they’re all very well sculpted. They feature even more detail than the pieces on Barnet, and they look really great. Nukpana features some rather impressive paintwork as well. He’s got some pretty decent base paint work, though there’s a little slop here and there. The detail lines are really well done, and his face just exudes character. This guy is pissed off. To top it all off, he’s got some pretty awesome tattoos on his face, arms and torso that really make this figure stand out. Nukpana includes an extra gun attachment which can be traded out for the blade, which is the same great quality and offers some nice variety.

THE ME HALF OF THE EQUATION

I picked up these two from TRU when the series was first released. I remember being pretty excited for the line and all the cool possibilities it offered. This set is a great example of just how great these figures were. The quality was there, the value was there, and the fun was there, but sadly, the fanbase wasn’t there.

#0425: Unmasked Spider-Man

Posted by Ethan Wilson in Reviews and tagged with , , , ,

UNMASKED SPIDER-MAN

MARVEL MINIMATES

Hey, look, more Minimates! So, yeah, the next few days are going to be Minimates reviews. Not anything new, but the randomized list sometimes spits out a few of them in a row. Hope you guys don’t mind me rambling on some more about them….

So, for this review, I’m going was back into the early days of Marvel Minimates, back when the concept of what constituted a unique figure was rather different than what it is today. So, without further ado, I present Unmasked Spider-Man.

THE FIGURE ITSELF

Unmasked Spider-Man was released in a two-pack with Doctor Octopus in Series 4 of Marvel Minimates. Ock is MIA, so it’ll just have to be Spidey this time. This figure’s shtick is exactly what it says on the tin: he’s a Spider-Man without the mask. Of course, nowadays the unmasked head is just an extra piece included with just about every Spider-Man, but back then figures had a lot fewer extras. The figure is about 2 ½ inches tall, and he features 14 points of articulation. He uses the standard body of the first 7 series, which it should be noted featured feet that were longer and had no peg holes for stands. It was a darker time. Anyway, the figure also features an add-on piece for the hair, which was sculpted specifically for this figure and never turned up anywhere else. It’s an okay piece, but it seems like it shrunk a bit compared to the prototype. It has a little trouble staying on, and it looks like he’s got a receding hairline. The figure’s paint is actually pretty great. From the neck down, he’s the same as the Series 2 Spider-Man, which set the standard for what the line could do. While the figure’s lack of any musculature dates him a bit, the weblines are nice and clean, and the go all the way around, which the current Spider-Men don’t tend to have. The face isn’t terrible, though he certainly looks angry about something. Unmasked Spider-Man included a backpack made out of webs, which is actually a pretty neat accessory.

THE ME HALF OF THE EQUATION

Unmasked Spider-Man was one of my earlier Minimate purchases. I remember I hadn’t actually gotten a regular Spider-Man yet, so this one served as my basic Spider-Man for a while. In retrospect, it’s not the most exciting Minimate, but at the time I was particularly fond of this one. Truth be told, all of the early Spider-Men were pretty outstanding examples of what the line had the potential to be.