Category Archives: Reviews

#1560: Black Panther

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BLACK PANTHER

MARVEL LEGENDS (HASBRO)

“A warrior and defender of Wakanda, T’Challa is the hero of legend, Black Panther.”

That’s definitely a better bio than the last Panther Legends release I looked at.  Maybe a bit on the short side, but at least they mentioned the basics, and didn’t go unnecessarily vague, right?

So, the release of the Black Panther film is just a few weeks out now, and there’s pretty much no way to miss the onslaught of merchandise hitting all of your favorite retail establishments now.  I’ve already looked at one figure from the associated Marvel Legends assortment, but it wasn’t actually a Panther-related character.  Today, I’ve decided to go with a figure that’s about as related to Black Panther as you can be: Black Panther himself!

THE FIGURE ITSELF

Black Panther is the first figure in the Okoye Series of Marvel Legends.  He’s one of the three movie-based figures in the set (four if you count the Okoye Build-A-Figure).  The figure stands 6 1/4 inches tall and has 32 points of articulation.  Panther’s gotten an upgrade to his suit since his appearance in Civil War, so this figure gets an all-new sculpt to match the design.  He gains a set of butterfly joints on the shoulders, which adds a fair bit of mobility to the figure.  With that said, the joints themselves are rather tight, so not a ton of extra movement.  The rest of the articulation has also been tweaked from the CW figure, so this figure can get into some deeper stances and the like, which is certainly a bonus.  With that said, I can’t say I like this figure’s overall sculpt quite as much as the CW version.  I think it’s partly due to me not liking the new design quite as much as the first, but also due to the articulation being a little more obvious this time.  It’s still not a *bad* sculpt at all, just not quite as good as a figure that’s admittedly one of Hasbro’s very best sculpts in the line.  Like his predecessor, Black Panther’s paint work is somewhat on the basic side, being mostly just some silver accent work on an otherwise black figure.  It’s all pretty clean, and it’s accurate to the source material, so that’s a plus.  Panther is packed with an unmasked head, an extra set of hands in fists, and the head of Okoye (for the Build-A-figure; it’s not a creepy memento or anything.)  I liked the last unmasked head a lot, and, on its own, I think this one looks a little better (albeit a little on the pale side).  It’s got the printed face that Hasbro’s been slowly working in, and it looks pretty solid.  The real issue is that the head doesn’t sit particularly well on the body, so I don’t see myself using it.

THE ME HALF OF THE EQUATION

Though I’m reviewing him first, Panther is actually the last figure from this set I grabbed.  Admittedly, I was already pretty happy with the last figure, so this one wasn’t high on my list.  But, then I ended up with all but one of Okoye’s pieces, and I was out and about with the $20 Tim had just paid me back for a Nerf gun I’d grabbed for him, and I found this guy, so I just went for it.  From the perspective of replacing the figure I already loved, this guy doesn’t measure up so great.  If you don’t have the Civil War figure, I think this guy would fair a lot better.  He’s certainly a solid figure, and I can see him being a favorite for a lot of people.

#1559: Transforming Thing & Herald Silver Surfer

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

TRANSFORMING THING & HERALD SILVER SURFER

MARVEL MINIMATES

After quite a bit of time of having to start every Fantastic Four-based review with a woeful intro about how the team has fallen out of focus, it’s kind of nice to be able to see the light at the end of the tunnel.  In case you aren’t up to date on the comics world, the Fantastic Four, or half of them anyway, are finally making their grand resurgence at Marvel, thanks to the recently launched revival of Marvel Two-In-One.  The book served as a showcase for FF member Ben Grimm in the ‘70s and ‘80s, pairing him off with other heroes from Marvel’s rather impressive stable of characters.  The re-launch once again focuses on Ben, but also brings in fellow FFer Johnny Storm, and is hopefully serving as a prelude to a full-fledged Fantastic Four relaunch.  Anyway, in honor of Ben’s return to comic-star-dom, how about looking at one of his figures?

THE FIGURES THEMSELVES

This pair was released in the 15th Toys R Us-exclusive series of Marvel Minimates.  The set was pulling double duty, with Ben meant to go with Series 48 of the main line (which was an all FF-themed assortment), and the Surfer augmenting the TRU-exclusive “Heralds of Galactus” set.

TRANSFORMING THING

“Pilot Ben Grimm first turned into the Thing after being bathed in cosmic radiation, and his skin was transformed into orange rock. He has since reverted to human form several times, but rarely for very long.”

This was the Thing’s twelfth (and, to date, last) time as a Minimate.  This one’s based on his John Byrne designed Negative Zone costume.  Ben actually had a few different costume variants under Byrne, and I think Minimates have covered them all.  This is the one that sticks the closest to the classic design, just being the usual shorts.  The figure stands about 2 1/2 inches tall and has either 14 or 12 points of articulation, depending on which way you have him configured.  Just how to handled Ben’s bulky build on the Minimate frame has been the source of much experimenting on DST’s part.  This one is a lot like the recent Hulks and such, being a standard ‘mate body, with a rather extensive selection of add-on pieces.  He’s got a head piece, chest cap, upper arm and leg covers, a pelvis cap, and unique hands and feet.  The head piece goes all the way back to the very first Thing ‘mate from Series 5, and most of the other pieces come from the first really bulked up Thing from Series 37.  The only new pieces here are the hands.  The last two Thing hands hadn’t really fit well with the new bulked up pieces, so these newer parts looked much better.  The bulked up look for Thing has always seemed maybe a touch too large for me, but I don’t think it looks horrible, and there’s no denying that there’s some really great detail work going on.  In terms of paint, Ben’s rather on the simple side…at first glance.  The detailing on the face is really good, of course, and I particularly like that they went with a calm expression.  One can only have so many screaming Ben Grimms.  The shade of orange used is one of my favorites, but it’s bright enough that he looks a little weird without any other sort of detailing on the rocks.  Some sort of black outline would have been cool.  As it stands, he still looks fine, but his face stands out quite a bit.  Under all of the add-on pieces, there’s actually a fully detailed second figure!  Yes, with the help of a spare head/hair, pelvis, hands, and feet, you can transform Ben back into his old human self.  The detailing on this underlying figure is pretty great, and it’s awesome that we got this option.

HERALD SILVER SURFER

The Surfer hasn’t been quite so lucky with ‘mates as Ben, with this one only being his third (and, again, his last to date).  I suppose it’s hard to do too much new with a guy whose design has remained essentially identical for 50 years.  From a sculpting standpoint, there’s not much to say about this guy.  He’s just the standard body, as he should be.  Painted details are really where it’s at, and Diamond has done a pretty awesome job of conveying the Surfer’s cosmic shininess.  The first Surfer was more abstract, and the second perhaps a bit too heavy on the details.  This one went for a Goldilocks approach to detailing and gave us a Surfer whose detail paint was just right.  I also appreciate the slightly more intense expression on this guy, since the last two went more stoic.  The Surfer was packed with his signature surfboard, as well as two energy effects for his hands, a portal effect to plug onto the back of his board, and a flight stand.  It all adds up to easily the most exciting looking of the three Silver Surfer ‘mates.

THE ME HALF OF THE EQUATION

I got Series 48 before these guys showed up, and that was one of my favorite assortments of Marvel Minimates pretty much ever.  So, I knew I was tracking this set down to complete my team.  At the time, I wasn’t particularly keen about getting another variant of the Surfer, but he was sort of along for the ride.  When I finally tracked this set down, I ended up loving it just as much as the Series 48 guys, and both figures included are hands down my definitive versions of the characters.

#1558: Swoop Vehicle

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SWOOP VEHICLE (w/ SWOOP TROOPER)

STAR WARS: SHADOWS OF THE EMPIRE (KENNER)

“The Empire’s broad reach has included thousands of planets in the galaxy. With such a vast territory to police, the Empire often pays bounty hunters huge sums for the capture or elimination of certain “wanted” individuals. The mercenaries favored by the Empire are expert trackers and assassins, dangerous individuals who are highly intelligent and extremely skilled in both weapons use and air combat. A preferred vehicle of many of these elite bounty hunters is the swoop, a brawny speeder craft most often associated with gangs and outlaws such as the Nova Demons and the Dark Star Hellions; its toughness and incredible speed make it a perfect mount for bounty hunters.”

For the most part, Shadows of the Empire’s focus was placed on our recognizable heroes and villains, filling in a few gaps in their personal stories.  Totally new concepts weren’t a huge piece of it.  Sure, there were the likes of Dash and his ship the Outrider, but they were really just quick concepts thrown together to replace a popular character who couldn’t actually be in the story.  There were a few more original concepts, but mostly off to the side, such as today’s focus, the Swoop speeder!

THE VEHICLE ITSELF

Following in the vein of Return of the Jedi’s Speeder Bikes, here’s the Swoop.  It’s sort of the chopper of the galaxy far, far away, I suppose.  Of the three vehicles offered in Shadows of the Empire packaging, this is certainly the smallest.  It’s about 6 inches long and stands 2 1/2 inches tall.  The cannon on the side swings up and down, but beyond that there’s no other moving pieces.  Not a shock on a vehicle of this nature, though, and its not like the design really allows for them.  It’s a decent enough design for a bike in the Star Wars ‘verse, matching up alright with what we’ve seen in the movies, while also not being a total retread.  The sculpt is fairly well rendered, albeit perhaps not as intricately as some of the actual movie designs.  It lacks some of the smaller details that sold that whole “used future” aspect of the franchise.  Still, it’s a visually intriguing design, and it fits well with the rest of what Kenner was doing at the time.  The paintwork on the bike is pretty solid stuff.  A lot of red and silver, but it looks good, and there’s some pretty cool accent work on the larger sections of the bike.  Smaller details are handled via decals instead of actual paint.  The decals are fine, but they are a bit less advanced than the sort of thing you’d see now, thereby making them rather obvious.  That said, the bike certainly looks better with them than without them.  The bike includes a missile for the cannon, which has a spring-loaded feature.

THE FIGURE ITSELF

Included with the Swoop is its own dedicated pilot, simply dubbed the “Swoop Trooper.”  Very original name there.  The package proudly boasts that this figure is exclusive to this particular set, and, unlike a lot of Kenner/Hasbro’s “exclusive” pack-in figures, it actually stuck for this guy.  I’d guess that’s largely due to his obscurity…and reminder, this is a Star Wars figure I’m taking about here.  The figure stands 3 3/4 inches tall and he has 7 points of articulation.  The bike pilots all got extra articulation at the knees, which I was always a fan of, though he does end up losing the waist joint.  This figure also has a different neck joint; instead of the usual swivel joint, he’s got a hinge sort of thing, which allows him to look up and down instead.  The same joint had previously been used on the Biker Scout from the main Power of the Force II line, and, while I don’t mind it, it certainly made a bit more sense on that figure than it does on this one.  The Swoop Trooper’s design was, of course, created wholesale for the Shadows of the Empire event.  It’s alright, but, like a lot of the Shadows designs, it doesn’t necessarily fit the classic Star Wars aesthetic, instead falling into more typical ‘90s comics design concepts.  It’s certainly not a bad design, but I can’t say it’s a favorite of mine.  Still, it’s a decent sculpt of a decent design.  I certainly appreciate the presence of some shared armor elements between this guy and some of the other troopers (namely the knee pads from the Biker Scout).  In terms of paint, the Trooper is a bit of a step up from the bike, since there’s a bit more going on.  I can’t say I’m a huge fan of the assortment of browns, as they aren’t a super thrilling combo.  That said, application is all pretty clean, and he looks respectable enough.

THE ME HALF OF THE EQUATION

The Swoop bike was a rather recent addition to my collection.  I missed a lot of the Shadows of the Empire stuff when it was new, so I’ve been piecing it together little by little.  I found this set at Lost in Time during their winter sale.  Since it was like $5, I figured it was worth it to finally grab it.  Not the most thrilling thing to come out of the franchise, but it’s another solid offering from Kenner’s ‘90s Star Wars output.

#1557: Ellen Ripley

Posted by Ethan Wilson in Reviews and tagged with , , ,

ELLEN RIPLEY

VINIMATES (DIAMOND SELECT TOYS)

“After surviving the xenomorph attack that killed her crewmates, Ellen Ripley was found and awoken years in the future to learn that the discovery site of the lifeform, planet LV-426, had since been colonized. Joining a military expedition to the planet, Ripley knew that even a single xenomorph would pose a danger to the entire colony, and if any escaped the planet, they could threaten the galaxy.”

Hey, while we’re on the topic of competitors to Funko Pop!, why not take a look over at Diamond Select’s stab at the world of collectible vinyl figures, Vinimates!  My Vinimates collection is modestly plugging along, and so far is only made up of figures just from my favorite properties.  Of course, I’d so far missed my all time favorite movie, Aliens.  Let’s fix that.

THE FIGURE ITSELF

Ellen Ripley was released in August of 2016, as one of the two Aliens-themed Vinimates (the other being the Alien Warrior).  Like the first proper Ripley ‘mate, this one’s based on her hive-storming look from the end of the movie.  It’s a distinct look, so it’s a good choice.  She stands about 4 1/2 inches tall and she has an articulated neck (a ball-joint, just like the others in the line).  Ripley’s sculpt is, of course, all-new to her.  It’s notably divergent from the smaller-scale take on this same design.  The hair should, in theory, be a little closer to Weaver’s from the movie, since it’s a new piece rather than a straight re-use, but I personally find it to be too close cropped for her hair.  It’s not terrible, though.  She’s posed hunched over, like she is while she explores the hive, holding her combo pulse rifle/flamethrower.  It’s a good look, and pretty standard for this particular look.    Her paint work is decent enough.  The base colors are pretty good matches for the movie, and the application is mostly clean, though there are some fuzzy lines.  The face is a decent enough likeness of Sigourney Weaver, though it’s kind of funny that her eyebrows aren’t filled in.  I would assume that’s not an intentional change, though.

THE ME HALF OF THE EQUATION

I kept meaning to pick up Ripley, ever since she was released, but I just sort of kept forgetting.  Admittedly, Vinimates are not usually at the top of my priority list.  I ended up finally getting her because she was marked way down during Luke’s Toy Store’s Black Friday sale, and that was enough to prompt me.  She’s decent enough, though I don’t know that she’s quite as exciting as the other two.

#1556: Luke Skywalker

Posted by Ethan Wilson in Reviews and tagged with , , , ,

LUKE SKYWALKER

STAR WARS MIGHTY MUGGS (HASBRO)

Before Funko created the insane every property imaginable juggernaut that is Pop! Vinyl in 2009, there was Mighty Muggs, another attempt at creating a multi-property pop-culture-driven vinyl figure line.  Launched in 2007, Mighty Muggs were Hasbro’s go at the world of collectible vinyl.  They spanned Marvel, Star Wars, Indiana Jones, and even Hasbro’s in-house properties G.I. Joe and Transformers.  With a tagline of “Made from 100% recycled Awesome,” the figures originally debuted on a 6-inch base body, before eventually being scaled down into Mini Muggs in 2011.  They would be scaled down once more, into Micro Muggs, in 2012, before going on hiatus as a whole (apart from an out of the blue SDCC-exclusive ROM in 2014).  In light of Funko’s immense success with Pops, it would appear Hasbro’s giving the brand another try, albeit with a slight…twist…I assure you, that’ll be funnier once you’re done with the review.

THE FIGURE ITSELF

Luke is figure 03 in the first six-figure assortment of Star Wars Mighty Muggs.  The assortment offers a mix of old and new trilogy designs, with Luke coming from the old, specifically from A New Hope.  It’s kind of his quintessential look, so it’s a god place to start.  The figure stands about 3 1/2 inches tall, putting him somewhere in-between the scales of the old Mighty Muggs and Mini Muggs.  So, if you have the old ones, you’ll still be starting over.  Perhaps not coincidentally, this sizing means that Luke is almost exactly the same size as his Funko compatriots.  Hasbro clearly knows the market they want to tap into.  Old Mighty/Mini Muggs had three points of articulation, at the neck and shoulders.  These new Muggs lose the neck joint, for reasons I’ll get into in a little bit.  Luke can still move at the shoulders, though, which I’m happy about.  The proportions of the new Mugg body are similar in a lot of ways to the original, but with a definite influence from the figures that have come since.  The main body is a bit squatter, and the head is larger in comparison.  I actually find these changes to be quite aesthetically pleasing.  Another change in this new incarnation is just how unique each figure is.  Old Mighty Muggs would deviate from the base body as little as possible, resulting in a very large number of figures that were sculpturally identical.  If Luke is any indication, that won’t be true this time.  He gets a unique hair piece, as well as a slightly tweaked right arm, holding his trusty lightsaber.  Once again, the changes are things I really don’t mind, and in the case of the hair, it was a direction Hasbro was already starting to experiment with at the end of the original line.  Another change in direction?  An action feature.  Mighty Muggs weren’t entirely without action features before, but they were far from the norm.  This time it’s standard.  Luke has three different facial expressions, made visible by pushing down on his hair.  It’s this feature that robs Luke of his neck movement.  Personally, I don’t mind, but I suppose an argument could be made that a non-mechanical rotation would have preserved the articulation.  Of course, then Hasbro wouldn’t have the gimmick to set them apart from the competition, so maybe that wouldn’t have been so great.  The paint is definitely where this guy really shines, and it mostly comes from those three expressions.  He’s got a standard determined stare, a grin, and an angry screaming one.  I like how they’re all three clearly the same guy, but still very distinctly different and incredibly expressive.  Very definitely the highlight of the figure.

THE ME HALF OF THE EQUATION

While I didn’t have a huge collection or anything, I was definitely a fan of Mighty Muggs back in the day (at least in part via Christian, who had a larger collection than I).  I was a bit sad when they went away, and I always preferred them to Pops.  When I heard they were coming back, I was quite excited, and I was even more exited when I found them at my local TRU.  I came very close to buying a whole set of the Star Wars ones, but decided to try the line out with one, and went for Luke who I thought looked the coolest.  I’m very happy with my purchase, and I can definitely see myself grabbing more of these.  Here’s hoping they take off!

#1555: Gold Ranger

Posted by Ethan Wilson in Reviews and tagged with , , , ,

GOLD RANGER

POWER RANGERS: LEGACY (BANDAI)

I don’t review many Power Rangers figures on this site.  And when I do, they’re pretty much always from the Mighty Morphin’ incarnation of the show.  It’s amusing, because, while I certainly have an appreciation for MMPR, since it’s the original and all, I only caught it fleetingly in its original run.  I’ve touched on this somewhat in past reviews. Power Rangers in Space is actually the first Rangers show I got actively invested in, but the first incarnation I owned any toys from was Zeo, Mighty Morphin’s follow-up series.  My favorite Ranger design of all-time is definitely Zeo’s sixth member, the Gold Ranger, who I’ll be taking a look at today.

THE FIGURE ITSELF

The Gold Ranger was released in Series 4 of Bandai’s Power Rangers: Legacy line.  He’s one of the three Zeo-based figures in this series, alongside the Green and Yellow Rangers (the other two figures are the Blue and Red Rangers from Dino Thunder).  The figure stands 7 inches tall and he has 32 points of articulation.  That’s slightly less posability than the Red Space Ranger, but the missing joints were mostly redundant on that figure and ended up adding a bit of extra work to pose him so that none of his extremities were oddly twisted.  With this figure, he’s definitely less contorted looking right out of the box.  That being said, I do feel it’s important to note that this guy does *not* have mid-forearm cut joints like the last figure.  I gave one of them a small twist on my figure and the glue holding his wrist in place came undone, which was a pain to fix.  The Gold Ranger’s sculpt uses the same basic starting point as the Red Space Ranger, so he has the same exaggerated, superhero build the Bandai America likes to give to their Rangers, for better or for worse.  He also has the same wonky shoulders that I wasn’t super crazy about, but fortunately those shoulders are mostly covered by his chest plate, so the issue is lessened.  In general, the new armor additions really help this figure out, since they cover a lot of Bandai’s usual sins on these figures, and in general help to keep him looking far more in line with his onscreen counterpart.  The armor pieces also off Bandai the chance to add a little bit more intricate detailing to the figure, thus keeping him from being quite as simplistic and bland as some of their other sculpts.  I also quite like his head sculpt, which does a great job of capturing the show’s design, and manages not to look too small in comparison to the rest of the body.  The paint on the Gold Ranger is the source of some controversy.  The prototype and all promotional shots of the figure showed him with armor that was actually gold, matching up with the show depiction.  When he arrived on retail shelves, his armor was more of a orangey yellow, with only the slightest metallic twinge to it, which has upset a lot of fans.  I can understand the complaint, and I’d probably be happier with the figure if he were in the proper colors, but I don’t find myself all that upset with the final product.  As it stands, I think the color’s close enough to work, and his overall appearance hasn’t been altered all that much.  I suppose it might bug me more if I had the Green or White Rangers, both of whom have a different shade of gold, but just on his own, I think this guy looks fine.  As a sixth ranger figure, the Gold Ranger doesn’t include a piece of his team’s Megazord, but he does include his Staff of Gold, which is pretty cool.

THE ME HALF OF THE EQUATION

This guy’s really the whole reason I got into the Legacy line in the first place.  I’ve wanted a Figuarts version of him since I got the Mighty Morphin’ team, but the odds of that getting made are kind of slim at this point.  So, when this guy was shown off, I was pretty pumped.  It took him a little while to get here, but I can’t begin to describe the excitement when I found him.  He’s got his flaws, but I’m overall very happy with this figure!

#1554: Red Son Batman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

RED SON BATMAN

ELSEWORLDS (DC DIRECT)

“Batman uses a form of radical brain surgery to turn rebels into calm and compliant believers in his party.”

Back in the ‘50s, the writers at DC Comics had a habit of creating stories that didn’t count, dubbed “Imaginary Stories.”  Even within the already fictitious world where there characters resided, these were stories that weren’t real.  You could do radical things, like kill Superman, or give him and Batman fully grown sons.  Eventually, this sort of evolved into full blown alternate universes which, when combined with worlds populated by the Justice Society, the Crime Syndicate, or the Freedom Fighters, formed the DC Multiverse.  The Crisis on Infinite Earths came along and undid all of that.  There was only one universe again.  Of course, that proved restrictive, and slowly those alternate universes started peaking their heads out again.  When the 1989 Gotham By Gaslight proved a notable success, DC founded their Elseworlds imprint, thus allowing a place for these “Imaginary Stories” again, albeit in a format that more resembled Marvel’s What If…?  The imprint was retired in the early ‘00s, but not before spawning a smattering of figures.  Today, I’ll be looking at one of those figures, namely Red Son Batman.  Superman: Red Son, for those unfamiliar, presents the tale of Superman with a slight twist: instead of landing in Kansas, baby Kal-L instead lands on a farm in the USSR.  Where does Batman come into that?  Well, contrary to the bio up top, he’s actually an anti-Superman terrorist, looking to bring down the Russian government.  Fun times.

THE FIGURE ITSELF

Red Son Batman was released in the second series of DC Direct’s Elseworlds line.  Interestingly, the Elsewords line was originally shown as a fully dedicated Red Son line, which would have had Batman in its first series.  When the line was re-fitted, this version of Bats got pushed back to Series 2, where he was one of two Batmen (the other was based on Gotham By Gaslight, fittingly enough).  The figure stands 6 1/2 inches tall and has 13 points of articulation.  Batman had a totally unique sculpt, based on his rather unique design from the comic.  All of the characters in Red Son got more utilitarian and practical designs than their main universe counterparts (well, apart from Superman himself), and Batman was no exception, though, admittedly, his design didn’t stray too far from his usual look.  The basic elements remain, but are augmented by things that make this design far more “real world” than “superhero.”  There’s no denying that the Red Son take on Batman is certainly a distinctive one, though, and I certainly can appreciate some of the small details that sell him as being a totally different person within this particular story (such as the holstered gun on his belt).  For the figure, the sculpt does an amazing job of translating the gritty and stylized look from the comic into three dimensions.  There’s some fantastic detail work on the sticking of his suit, as well as the fur lining of his cap, and even the stubble on his face.  The figure is slightly pre-posed, but it’s a more purposeful hunched sort of pose, in contrast to some of the “never looked right in any pose” figures that DCD was putting out at the same time.  The figure’s impressive sculpt is topped off by a similarly impressive paint scheme.  The basic work is all cleanly applied, and there’s some solid accent work going on to keep him from looking too squeaky clean.  I particularly like the mud stains on the cape and uniform.  They add a nice bit of character to the figure.  Batman is packed holding the detonator he attempts to use to defeat Superman in the story, but it can be swapped out for a bat-shaped pickaxe.  I prefer the detonator myself.  He also includes a display stand with the Elseworlds logo and his name on it.

THE ME HALF OF THE EQUATION

When the Elseworlds figures hit, I wasn’t immediately familiar with most of the source material.  Given the choice between the two Batmen in Series 2, I went for the Gotham By Gaslight version, since that was the one I knew.  I only read Red Son many years later, and by that point, the figures had mostly picked up a hefty aftermarket value, with Batman being perhaps the highest.  Recently, Cosmic Comix purchased a rather sizable collection of action figures, and this guy was among them.  They offered him to me for a reasonable price, so I went for it.  He was definitely worth picking up.  He makes for quite a cool looking figure!

#1553: Keith

Posted by Ethan Wilson in Reviews and tagged with , , , ,

KEITH

VOLTRON: LEGENDARY DEFENDER (PLAYMATES)

“An orphan, Keith is driven by an insatiable curiosity of where he came from – which sometimes conflicts with the goals of the team.  The most talented pilot of his generation, Keith refuses to live by other people’s rules and instead carves out his own path.”

Remember waaaaaaay back, like four months ago, when I took a look at two of the Paladin’s from the new Voltron line?  And remember how there was a third that I just never got around to? No?  That’s fair.  I remembered, though.  I always remember.  It was eating at me.  So, today, I’m finally finishing out the set.  Admittedly, it’s an incomplete set to begin with, but I’m completing that incomplete set nonetheless.  What I’m really trying to say here is let’s check out the Keith figure!

THE FIGURE ITSELF

Keith is part of the second series of basic Voltron: Legendary Defender figures from Playmates.  This figure stands about 4 1/2 inches tall and has  19 points of articulation.  I’ve actually looked at most of this figure before; from the neck down, Keith is the exact same figure as Lance.  Given how close the two of them are in build, and the fact that the uniforms are meant to be the same, it’s pretty reasonable.  Mattel did the same thing for their Paladins, so there’s precedent.  I liked the sculpt when it was used for Lance, and I still like it here.  I still think the articulation could be implemented a little bit better, but it’s far from terrible.  Keith does get a new head sculpt, which is reasonable enough.  I think it falls in-between the other two in terms of quality.  It’s stronger than Shiro’s, but not quite as on the mark as Lance’s.  I will admit, the paint on this one makes it rather difficult to rate the quality of the sculpt.  Speaking of paint, it does feel like a slight downgrade on this figure.  The overall application is fine, but there are a lot of fuzzy edges and his face in particular suffers from quite a bit of bleed over, masking what is a passable sculpt.  I think if the eyes were better placed at the very least, it would look a fair bit better.  Most frustratingly, the red from his wrist guards has ended up staining the white plastic of the forearms.  It looks rather sloppy, and hurts the overall appearance of the figure.  Like the other two figures, Keith is packed with a removable helmet and a shield, as well as his bayard in sword form.  The helmet’s still really bulky, but it works for what it is.  The shield is exactly the same as the other two.  Nothing new there.  The bayard is nice; he has a little trouble holding it, but once you get it secure it stays put alright.

THE ME HALF OF THE EQUATION

When I stumbled across this series at my local Walmart four months back, they only had one of each Paladin, and the Keith figure’s face looked like someone had stepped on it repeatedly, so he got left behind until I could find another one.  The problem was, I didn’t see anymore of this assortment for four months.  Somehow, this one Walmart was the only store to get these guys in stock, and just the one set at that.  Every so often, I stop by that Walmart, and I’d spot a Keith, and get all excited, only to discover it was that same messed up figure, every time.  It was discouraging to say the least, and I eventually just sort of gave up.  Just a week and a half ago, I was at Target looking for something completely unrelated, when I spotted this Keith…and no one else from the assortment.  It was weird, but I certainly wasn’t passing him up.  This figure certainly has its flaws, but I do enjoy him overall.  I eagerly await the release of the other two Paladins.

Incidentally, the messed up Keith figure was still there as of the day before this review was published.  I’m starting to feel a little sorry for the poor guy…

#1552: The Riddler

Posted by Ethan Wilson in Reviews and tagged with , , , ,

THE RIDDLER

BATMAN: HUSH (DC DIRECT)

Batman’s regular foes have always had a pretty easy time with toys.  I suppose that comes with the territory, being a part of the most successful comics franchise in history and all.  That being said, some of them take priority over others.  While there’s never going to be a shortage of Joker figures, some of the second stringers get left out.  Take, for instance, Riddler.  Certainly high on the list of well-known Bat-Rogues, but he goes rather lengthy spans of time without action figures.  It actually took DC Direct a good couple of years before they got to him, and it was really only because he was a pivotal player in a storyline they were doing a full line of figures for.  But hey, beggars can’t be choosers.  Let’s take a look at that figure!

THE FIGURE ITSELF

Riddler was released in the second series of DC Direct’s Batman: Hush toyline, and is based on Jim Lee’s illustrations from the “Hush” storyline.  The figure stands 6 1/2 inches tall and he has 11 points of articulation.  “Hush” saw Riddler in the business-suited attire he picked up in the mid-90s.  It’s a decent enough look, and helped to separate Riddler a bit from the legions of spandex-clad characters DCD was producing at the time.  With that being said, it was perhaps not a design that lent itself to a super exciting action figure, especially when it comes to articulation.  I would think that, at the very least, they would have tried to give him some knee joints or something.  Perhaps they wanted to preserve the integrity of the sculpt?  On the plus side of things, the sculpt is actually pretty solid.  He’s very clean and sharp.  The head definitely capture’s Lee’s artwork very well, especially the snide and serious expression,  I also really dig the question mark-shaped spit curl.  The body is really only designed to work in one particular pose, but it’s a decent enough pose, and you do have some options.  The paintwork is all pretty good; par for the era of figures.   The colors are all pretty bright, and the application is really clean.  Lee had removed the question marks from the suit, so the figure’s a little more basic looking that usual, but it’s accurate to the material.  Riddler was packed with his hat and cane, as well as a display stand.  My figure is missing the hat, but it was cool when he had it.

THE ME HALF OF THE EQUATION

I missed out on the first series of Hush figures when they were released, but when I saw the prototypes for Series 2, I knew I wanted to have this guy in my collection.  I got him new, courtesy of my regular store Cosmic Comix.  I remember this series got pushed back a couple of weeks, which was really frustrating, so I was thrilled when they finally arrived.  Riddler is, I think, the figure in this set that’s aged the worst, and he certainly shows his age.  That said, he’s still one of the best Riddlers out there, especially when it comes to depictions of his suited look.

#1551: Sasquatch & Vindicator

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SASQUATCH & VINDICATOR

ALPHA FLIGHT (TOY BIZ)

“Dr. Walter Langkowski was content with his quiet, fairly normal life as a college physics professor. That was before his insatiable curiosity regarding the effects of gamma radiation upon the human body led him to accidentally transform himself into the mighty Sasquatch! Standing at nearly ten feet tall, covered with orange fur and able to lift nearly 70 tons, Sasquatch is a physical powerhouse of superhuman strength. Led by electromagnetically charged Vindicator, Sasquatch serves Canada as a member of its foremost group of super heroes: Alpha Flight. Together, Alpha Flight fights to protect Canada and the world from the forces of evil.”

Okay, so there’s a bio for one of the two figures in the set, with like a passing mention for the other one.  Kind of an odd choice.  The combined bio thing worked better for Northstar and Aurora.  Here it feels awkward, right? Also, it’s worth noting that the use of just the “Vindicator” name with no pronouns or anything means it could technically be referring to either James or Heather.  Perhaps Toy Biz hadn’t decided which of the Vindicators was going to be included yet when the text was written?  Come to think of it, Vindicator’s not even in the illustration on the top of the box like all the others are.  It’s just Sasquatch.  Weird.  Well, I’m still gonna review them both.  Here we go.

THE FIGURES THEMSELVES

Sasquatch and Vindicator were one of the three two-packs that made up the first (and only) series of Toy Biz’s Alpha Flight line from 1998.

SASQUATCH

Gonna be honest, I didn’t actually know all that much about Sasquatch until that bio up there.  He’s one of the most prominent members of the team in terms of toy representation, with this figure, a Minimate, and TWO Marvel Legends.  He’s rivaled only by Puck in terms of representation.  That’s not bad for what essentially translates to Canadian Hulk.  This figure stands about 6 inches tall and he has 13 points of articulation.  He’s a little smaller than Sasquatch tends to be depicted in the comics (where he frequently falls into the 8-10 ft range), but he’s still noticeably taller than the rest of his teammates, which is really the important thing in all of this.  Though his head is a separate piece from the torso, the nature of the neck and hair design is such that there’s no actual motion, an issue that would crop up on most of Sasquatch’s future figures.  Sasquatch’s sculpt was new to him (though it would be re-used for the Dark Side line’s Man-Thing figure not too long after), and it’s not a bad piece of work.  It matches pretty well with depictions of him over the years.  There’s some pretty great work  on the texturing, showing Toy Biz’z slow improvement over time that would eventually lead to the likes of Marvel Legends.  In terms of paint, Sasquatch is actually a bit better than you might expect.  TB could have gone the easy route and just done straight orange, but instead they’ve actually done quite a bit of accenting on the musculature and such, which looks pretty great.  Sasquatch has no accessories, though if you want to get technical, the way the packaging is laid out I suppose you could consider Vindicator his accessory…but that makes me uncomfortable.

VINDICATOR

This is actually the second time I’ve looked at a figure of Heather Hudson as Vindicator, in the same costume no less!  After this, I’ll have reviewed 100% of the Heather Hudson figures ever made.  Yay?  Like the Minimate, this figure depicts Heather wearing her (then) deceased husband Mac’s Guardian/Vindicator costume.  The figure stands 5 inches tall and she has 12 points of articulation.  Vindicator premiered this particular body, but it went on to serve as the basis of a number of other female figures, including the previously reviewed Bloodstorm figure.  It was a decent enough body for Heather, though it has a little bit of difficulty staying standing.  Her head is re-used from the Marvel Collector Editions Jean Grey figure, which isn’t the best sculpt Toy Biz ever put out, but at the same time, the head’s hardly the worst part of the original figure.  Plus, there’s a visor added to it, which helps to mask some of the weirder parts of the original piece.  The hair is still rooted, which isn’t super ideal in this scale, but it could be worse.  The paint work on this figure isn’t quite as interesting as with Sasquatch, but it gets the job done.  The edges are a bit fuzzy, but  for the time not bad.  Like Sasquatch, she includes no accessories.

THE ME HALF OF THE EQUATION

Unlike the previously reviewed Northstar and Aurora, I didn’t get this pair new.  I saw them many times at retail, but wasn’t familiar enough with the characters to really be drawn in.  I ended up picking up over this past summer, loose, from Yesterday’s Fun.  Vindicator’s just okay.  Not anything really special or anything.  Sasquatch on the other hand, is actually pretty awesome, and I’m glad I finally got one.  Now, I’ll just need to find Puck and Snowbird.