Category Archives: Reviews

#1414: Rey – Jedi Training & Elite Praetorian Guard

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

REY – JEDI TRAINING & ELITE PRAETORIAN GUARD

STAR WARS: THE LAST JEDI

Another Rey review? In the same day, even?

Back when I was looking at the stuff from the very first Force Friday, I had no clue who the heck this Rey person was.  I didn’t even know she was the main character (I mean, neither did anyone else not involved in the film at that point, but still).  Things are rather different now, of course, since she’s undoubtedly the central character of this new trilogy, and privy to all the action figures that entails.  Hasbro is doing their darnedest to make sure the standard Rey is available as many ways as possible, in much the the same way that they handled the standard Jyn figure for Rogue One.  At launch, the Jedi Training variant of Rey is available both on her own and packed with one of Supreme Leader Snoke’s fancy new guards.  Since I’m a sucker for cool faceless minions, I, of course, went for the two-pack option.

THE FIGURES THEMSELVES

These guys are on of the pair of two-packs in the Star Wars: The Last Jedi line at launch.  This one’s the only announced two-pack so far to be TLJ-based, but I’m sure that’ll change.  As noted above, the Rey figure here is the same as the version included in the Wave 1 Orange assortment, with one extra accessory thrown in.

REY – JEDI TRAINING

It looks like Rey will be wearing her cool Resistance togs from the end of The Force Awakens for at least some segment of the new movie, but this figure depicts her in her brand new Jedi training outfit.  The design actually isn’t too far removed from her Jakku look, albeit in grey and black instead of the tan and white, as well as boots that go further up her calves and a holster for the blaster she got from Han in TFA.  It’s definitely a strong look.  I think I still like the Resistance look a little more, but I do find this to be an improvement on the scavenger look.  This figure stands a little under 3 3/4 inches tall and has the standard 5 points of articulation.  Rey’s all-new sculpt is a definite improvement over her inaugural figure, which I always found to be the weakest of the initial batch of figures.  This figure’s proportions are far more balanced, she feels much less frail, and the likeness to Daisy Ridley definitely feels like an improvement over prior attempts.  Still not spot-on, but closer.  Rather than the robes sculpted onto the legs schtick of the last sever Rey figures, this one opts for an add-on piece instead, which works far better for her shorter cut style of garment.  As with Luke, the texturing on this figure is nothing short of amazing, and just phenomenal for the scale.  In terms of paint, Rey is generally pretty well handled.  The application’s all pretty sharp, and the colors appear to match pretty well with what we’ve seen so far from the movie.  Both versions of Rey are packed with her staff, blaster, and Anakin’s lightsaber, which is a very impressive selection.  The two-pack version adds in a…weird-back-pack-shoulder-blaster thingy… I kinda thought we were done with these.  I mean, it looks like one of the Rebel packs from Endor, so that’s at least kind of cool, but it’s still not a piece I see myself using ever.  Both the figure and the backpack are ForceLink compatible, so there’s that.

ELITE PRAETORIAN GUARD

First we had the Imperial Royal Guards, now we have the Elite Praetorian Guard.  Always gotta have those regal looking dudes in red, right?  These guys were kept und wraps for a while in the lead-up to the product launch, but now they’re all over the place.  Here’s hoping they don’t end up as glorified cameos like the Guavian Enforcers.  There are three different helmet variations for the Guards; the one seen here has what appears to be a hat of some sort.  Maybe he’s trying to keep the sun out of his eyes?  Anyway, the figure stands about 4 inches tall and has the standard 5 points of articulation.  Like yesterday’s Luke figure, this guy’s got the skirt cut into legs thing going on.  It works okay with this design, fortunately enough, so I can’t really complain.  The sculpt is all-new, and generally pretty decent.  The work on the armored parts is nice and crisp, and he’s even got some great texture work on the skirt to denote it as a separate material.  The Guard’s paintwork is actually quite minimal, with the only real work being the small blue dot near the top of his torso, and a little bit of black on his inner thighs.  It’s accurate to what we’ve seen so far of these guys, and they did go to the effort of giving the armor and the skirt two different finishes, which is nice.  He’s packed with a pair of axes, which can be dual wielded or snapped together to form one larger weapon, which is pretty nifty.  Like Rey, he’s also ForceLink compatible.

THE ME HALF OF THE EQUATION

Like Luke, this set was pretty high on my Force Friday list.  I had initially planned to just grab the standard Rey, but I really couldn’t pass up the sweet looking Guard.  I found this set early as well, but was still unable to purchase it until the actual event.  This set didn’t prove too difficult to grab on Friday morning; I ended up picking it up off the floor after the guy mentioned yesterday flung it from its peg.  Rey’s probably my favorite small-scale figure of her yet (though the Resistance version is still a very reputable contender).  The Guard is a lot of fun and I can’t wait to pick up the other two variants down the line.

#1413: Luke Skywalker – Jedi Master

Posted by Ethan Wilson in Reviews and tagged with , , , ,

LUKE SKYWALKER – JEDI MASTER

STAR WARS: THE LAST JEDI

Okay, you guys read this morning’s post.  You know what that means.  That’s right, it’s time for my Force Friday II reviews!  Oh yeah!  Let’s do this, homebiscuits!

Perhaps the most anticipated of the new products are those based on Luke Skywalker.  Apart from a few re-released OT figures, Luke was almost completely absent from the Force Awakens and Rogue One products.  In Hasbro’s defense, their original plan for TFA’s small-scale line was to have Luke offered as a mail-away figure, which would have been a super nifty way of handling things, but it was ultimately nixed by someone higher up.  Anyway, I’ve been patiently awaiting a new trilogy Luke.  Now I have him.  Yay!  Onto the review!

THE FIGURE ITSELF

Jedi Master Luke is one of the 11 basic figures Star Wars: The Last Jedi released on Force Friday II.  The figures were divided into two different assortments: orange and teal.  Luke was part of the Orange assortment, which was the assortment devoted to the more central characters.  Luke’s sporting at least two looks in The Last Jedi.  This figure is based on the look he was sporting in The Force Awakens’ final moments, which he will no doubt be keeping for at least a decent chunk of the new movie.  I like this look a lot; it sort of merges the aesthetics of Obi-Wan’s look in A New Hope with Luke’s Jedi Knight garb from Return of the Jedi.  The figure stands about 3 3/4 inches tall and he has 5 points of articulation.  His sculpt is all-new to him, and it’s stylistically consistent with the stuff from both TFA and Rogue One, so the leg joints, for instance are cut right through his robes, rather than the robes being a separate add-on piece.  The figure’s stance is simple and straight, but it’s not too stiff; it looks fairly natural.  The level of detail on the sculpt is a step up from the two previous lines, which is quite impressive on such a small figure.  The head sports a pretty spot-on Hamill likeness, and the texture work on the clothing is just top-notch.  The wrinkles and everything really sell that “hermit” look quite nicely.  His belt is a separate piece, affixed in place, which offers some nice depth to the figure.  Interestingly, he’s got a loop to hang his lightsaber hilt from, but there’s no saber included.  It’s good forward thinking, I suppose.  Luke also has a soft plastic removable cloak.  It’s certainly similar to the one from the old PotF2 Jedi Luke, but the execution is quite a bit more precise, the details are sharper, and the overall appearance is far less goofy.  Paint’s always been an issue with Hasbro figures, Star Wars figures especially.  While Luke has a little bit of slop in one spot on his back, the overall application is a marked improvement over the TFA and RO figures.  Apart from the cloak, Luke has no extras.  What?  No weird gimmicky accessory to be thrown straight into my box of weird gimmicky accessories?  Indeed, this time around, Hasbro’s put the gimmick inside the figure itself, with the CommTech 2.0 ForceLink feature.  There’s a chip inside the figure, which, when brought within close proximity of the ForceLink Reader will play character relevant sounds.  I don;t have a reader yet, so I’m not sure how well it works, but it does mean that all the figures get this nifty little symbol on their left foot.  And now I have less excess plastic to worry about dealing with when I open these guys.  Yay!

THE ME HALF OF THE EQUATION

Ever since the end of The Force Awakens, I’ve been wanting this figure, so he was at the very top of my list of wants for this Force Friday.  I actually found him and most of the other Last Jedi product a week early, when I stopped by the Walmart nearest my brother’s college after moving him in.  Unfortunately, they were all restricted at the register, with a code claiming they’d been recalled for lead paint, so I wasn’t able to buy them then.  When Force Friday rolled around, Luke was #1 on my priority list.  When I actually got to the action figure aisle, the Lukes seemed to be missing, but they were just hiding at the back of the pegs.  Of course, I discovered this when the guy next to me in the aisle flung literally ever figure on the peg in front of the two Lukes at me, but at least I got one of those two Lukes, right?  I’m really happy I found this guy.  He’s one of my favorites released in this style, and one of my favorite small-scale Star Wars figures in general.

#1412: Micron

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MICRON

JUSTICE LEAGUE UNLIMITED (MATTEL)

By the time Batman Beyond hit the air, Hasbro had fully absorbed Kenner and had also given up almost entirely on actually doing complete tie-in toy lines for the DC cartoons.  So, their Beyond line was mostly comprised of weird variants of the title character, with only a handful of supporting players offered, and even then in very altered states.  The Beyond characters largely went un-released until Mattel decided to expand the reach of their Justice League Unlimited line, and go beyond just items based on that show.  It’s only fair that this expanded line would include members of the team actually *called* the Justice League Unlimited, which covers today’s figure, Micron, the team’s legacy replacement for the Atom!

THE FIGURE ITSELF

Micron was released in 2012 as part of Mattel’s Justice League Unlimited line.  He was originally packed alongside his teammate Aquagirl and the future version of Static Shock.  Both he and Aquagirl never actually showed up in Justice League Unlimited, but at this point, the line had more of an anthology thing going on.  The figure stands about 4 1/4 inches tall and has 5 inches tall.  He was built using the small male body, with a new head.  While the base body was decent enough for Micron in terms of build, he definitely seems a little small.  Just one of the sacrifices of doing a line based on this sort of model, I suppose.  Also, as a later in the line figure, he’s got the really weak ankles that plagued a lot of these guys, meaning he falls over at the drop of a hat.  It gets rather annoying.  The head is a pretty nice recreation of Micron’s look from “The Call,” though it does seem a touch too big for the body.  Still, not terrible.  The rest of the work is all in the paint, which is pretty decent overall.  The application is clean, and work on his logo is certainly sharp.  The red’s a good shade, but the blue seems a little light.  It’s hard to say, because in the show, the blue sections of his costume were actually black with blue highlights, so how that’s supposed to translate into an actual figure is anyone’s guess.  Micron included no accessories, not even a little mini Micron, which seems like a real missed opportunity.

THE ME HALF OF THE EQUATION

When “The Call” aired originally, I actually missed most of part 1, meaning I missed almost the entirety of Micron’s role in the show.  It wasn’t for several years that I actually got to see him in action.  As a fan of the Atom, I was always intrigued by his design, and certainly would have gotten a figure of him when the show was still on.  By the time Mattel released this guy, I had largely given up on JLU, and wasn’t really following it.  I ended up getting this guy just this past summer, fished out of a bin of loose figures at Yesterday’s Fun.  He’s not super thrilling, or anything, but he’s not a bad figure.

#1411: Vulture

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

VULTURE (w/ WINGS)

MARVEL LEGENDS (HASBRO)

“A nefarious villain with his eyes set on ultimate technological dominance, Vulture suits up in an enhanced suit that makes him nearly unstoppable.”

For me, one of the greatest highlights of Spider-Man: Homecoming was its portrayal of classic Spidey foe Vulture.  While I’ve always been okay with the character in the comics, he’s never really grabbed me.  Homecoming’s more conflicted take on the character gave him some real gravitas, which made him almost as relatable as Peter.  It also didn’t hurt that he got one of my favorite redesigns of the MCU, which means he made for a pretty darn awesome toy.  And now I have that pretty darn awesome toy, so I’m gonna review it.  Alright!  We made it to the finish line!  I’ve completed Vulture!  Yeah!  Let’s do this!

THE FIGURE ITSELF

Vulture is both a single release figure and the Build-A-Figure of the “Vulture Series” of Marvel Legends.  How’s that work?  Well, Adrian himself is sold on his own, and it’s his wings that are parted out to the rest of the figures in the assortment.  Normally, I review single releases and BAFs separate from one another, but it seemed a little silly to stretch this over two days, so I’m looking the complete Vulture in one go!  The basic figure stands a little over 6 inches tall and he has 32 points of articulation.  The wings add 10 points of articulation and a 15 inch wingspan to that mix (plus spinning turbines to boot!).  The sculpt is all-new, and it’s definitely amongst Hasbro’s best.  I was a bit disappointed with the smaller scale Vulture figure, which was off-model and lacked a lot of detail work.  That’s definitely not the case here.  Not only is he a pretty much spot-on recreation of Vulture’s on-screen design, but he’s also got a ton of awesome detail work all throughout his outfit.  I particularly dig the head sculpt, which uses a multiple part assembly to replicate his visor and visible illuminated eyes, which is a super cool look (and one of the things I was most disappointed to see missing from the smaller figure).  By virtue of the whole Build-A-Wing concept, this Vulture’s wing pack is a nice change from the smaller figure, being both properly scaled to the actual figure and actually articulated.  I will say, they feel a tad thin, and a little under-detailed, and I feel the joints are a bit obtrusive, but I think they’re pretty decent overall.  Vulture’s paint work is pretty decently handled overall.  The colors actually match up with the movie this time, and the application is all sharp, with very little slop or bleed over.  A little more accent work would probably help to make him pop a little more, but it’s still pretty decent as-is.  The basic Vulture figure is packed with the mid-section of the wing pack, as well as a clear stand to help keep him steady once the wings are completed.  It’s too bad he didn’t include the handheld controls from the movie, but it’s possible they were working from an in-progress design for the character in that respect.

THE ME HALF OF THE EQUATION

Oh boy, this guy.  I actually got the basic Vulture figure at the same time as Beetle, meaning he was one of the first two figures I got from the series.  He’s just been sitting on my desk waiting for his wings since July.  When I finally got all of the figures to assemble him, I was pretty excited, because it meant I could finally review him.  Completed, he’s one of my favorite figures in this series.  And given that this series contains two slam-dunk versions of characters who have been on my wish list for a while, that’s quite a compliment to how well this figure turned out.

#1410: Spider-Man – Homemade Costume

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPIDER-MAN – HOMEMADE COSTUME

MARVEL LEGENDS (HASBRO)

“When Peter Parker discovers spider-like senses and wall-crawling abilities, he develops his own suit to become Spider-Man.”

Hey, it’s Force Friday II!  Of course, it’s not like I’m reviewing anything from today’s event, since I didn’t get anything early (though I certainly tried).  But I am writing this review from the line to get into a midnight opening, so it’s in the spirit of the day, I guess.  Anyway, let’s look at another Hasbro product, based on another Disney-owned property!  It’s Spider-Man!

THE FIGURE ITSELF

This Spider-Man is figure 2 in the Vulture Series of Marvel Legends.  It’s the third Spider-variant in the series, and the second based on Homecoming.  This figure is based on Peter’s homemade costume, which he ends up wearing during the film’s climax, following the more advanced suit’s confiscation by Tony.  As I’ve noted before, the design is loosely based on Ben Reilly’s Scarlet Spider costume, which is nifty.  The figure stands about 6 inches tall and he has 32 points of articulation.  Spidey’s sporting an all-new sculpt, which is a pretty solid piece of work.  He’s not sporting quite the same build as the Stark Tech Spidey, but he’s close enough that they’re believable as the same person.  This figure’s probably the closer of the two proportions wise, so that’s a plus.  The detail work is pretty solid as well, with some cool work on the folds and everything.  There could maybe be a little more texture work, but it’s acceptable for the line.  It mostly follows the movie design, though the goggles lack some of the technical details.  Still, not bad.  The paintwork on this guy is fairly decent, though not quite as impressive as some more recent releases.  However, the colors are decent and the application is mostly pretty clean.  The figure is packed with two sets of hands in both fists and web-shooting poses, as well as a hood piece (both pulled up and down).  He’s also got the flip side wing piece of the one included with the standard Spidey.  Yay for an almost complete Vulture!

THE ME HALF OF THE EQUATION

I got this guy from Amazon, at the same time as Moon Knight, since I’d had no luck finding him at retail.  He’s a decent figure, but I do find him to be slightly less exciting in-hand than I’d expected.  I guess he’s somewhat less climactic after already getting the version from the basic line.  Still, I’m happy to have him, and the figure is a solid addition to the line.

#1409: Tombstone – Sinister Villains

Posted by Ethan Wilson in Reviews and tagged with , , , ,

TOMBSTONE – SINISTER VILLAINS

MARVEL LEGENDS (HASBRO)

“When the battle for justice is underway, artificial enhancements make these villains stronger, faster, and even more of a threat.”

I can’t help but feel that this bio worked a bit better for Beetle than it did for Tombstone.  I mean, do filed teeth and access to a gym really qualify as “artificial enhancements?”  Seems a bit questionable to me.

As you’ve no doubt pieced together, today’s focus figure is Tombstone.  He’s a Spider-Man villain.  He’s albino.  He was created in 1988.  I don’t know a whole lot about him.  My knowledge of Spidey foes is generally from very early in his career or very recently in his career.  Late ‘80s additions don’t really fall into that category, leaving old Tombstone here out in the cold.  But he’s got a Marvel Legend, and I bought it, so here he is, I guess.

THE FIGURE ITSELF

Tombstone is figure 5 in the Vulture Series of Marvel Legends.  His official name is “Sinister Villains,” which he shares with the previously reviewed Beetle.  While he doesn’t really have any ties to the classic Beetle, the most recent Beetle is his daughter, so that’s something.  The figure stands about 7 inches tall and he has 32 points of articulation.  Tombstone is often seen in a suit and tie in the comics, but this particular figure is based instead on his high-collared jumpsuit look he was sporting into the early ‘90s.  It’s not a favorite of mine, but neither is Tombstone.  The choice of costume is most likely due to ease of parts re-use.  The jumpsuit-ed look allows for Tombstone to make use of the Hyperion body.  The body isn’t without its flaws, but most of them were relegated to the torso.  As luck would have it, the upper and lower torso and the pelvis on this figure are new, which really breaths a lot of new life into the mold.  The weird pectoral shelf thingy is gone, and the proportions just seem more balanced in general.  He’s also got a new head sculpt, which is actually a pretty awesome piece.  The detail work is all really sharp, and his evil grin looks really cool.  In addition to the head and torso, Tombstone’s also got add-ons for his arm and leg straps, which work well enough, though they have to be put back into place every so often.  The paint work on Tombstone is pretty decent.  It’s mostly just black plastic, but the work on his head and torso is actually quite impressive.  Tombstone has no accessories of his own, but he does include the all important second turbine for Vulture’s wings.

THE ME HALF OF THE EQUATION

Really, I only bought this figure for the Vulture wing piece.  Like I said, I’ve never been much of a Tombstone fan.  I saw this figure several times while searching for the rest of the series, but never picked him up, since I figured I’d get him later.  Then I got the rest of the series, and all of the sudden I couldn’t find Tombstone.  Fortunately, Amazon was my friend on this one, and I was able to get him for below retail even!  For a character I don’t have any attachment to, he does at least make a decent enough figure.

#1408: Spider-Man

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPIDER-MAN – HOMECOMING

MARVEL LEGENDS (HASBRO)

“When crime hits the big city, Peter Parker suits up as New York’s own web-slinging, wall-crawling hero, Spider-Man”

Yay!  More Spider-Man Marvel Legends!  Specifically of the Homecoming variety.  I haven’t yet taken a look at any of the specifically Homecoming-based Legends yet, but I’m changing that with today’s review.  Today, I’ll be taking a look at the main figure of the film’s titular hero, Spider-Man!  Let’s see how he turned out!

THE FIGURE ITSELF

Spider-Man is figure 1 in the Vulture Series of Marvel Legends.  This is one of two Homecoming-based Spider-Men in this particular series.  This one represents his Stark-designed suit, which is just a slight variation of his classic comics suit.  The figure stands a little under 6 inches tall and he has 32 points of articulation.  This figure makes use of a lot of pieces from the Spidey released in the Civil War 3-pack from last year.  He does get a new upper torso, upper arms, and two new heads, which help to fix a number of issues present in that figure’s sculpt.  There are still a few issues present with the final product (the small shoulders and the slightly short arms are really the biggest standouts), but the overall figure looks a lot better this time.  On the plus side of things, the details on the costume all match up pretty well with the on-screen counterpart.  The posablity is also really top notch; there are few Spider-related poses that this guy can’t pull off.  The two swappable heads included with this guy help to replicate a feature that most Spider-Man figures overlook: changing expressions on the eyes.  It was one of the cooler features added to the new Spidey suit for the MCU redesign, so it’s nice to see it carried over to the figure.  The first head has the eyes widespread, in a sort of Mark Bagley style, while the second has them closed tighter, looking more like Steve Ditko’s take on the character.  Honestly, I can’t quite pick which of the two I prefer; I definitely foresee these two heads being swapped out rather frequently on my figure.  Another addition to this figure from the prior release are the “web-wings.”  When Spidey debuted, he had these wings on his costume, and the film managed to work them in a nifty little way.  The figure has removable wings that mount under the biceps, similar to how they were handled on Spider-Woman from the Thanos Series.  They don’t stay in place anywhere near as well, though, and they fall out a lot.  So, they aren’t really practical for long-term use.  Fortunately, they’re totally removable, and the figure’s still pretty awesome without them.  The paintwork on this guy is pretty solid; the colors are fairly bold, and the application is mostly pretty sharp.  In addition to the previously mentioned extra head and web wings, Spider-Man includes two pairs of hands in both web-shooting and fist poses, as well as the mid-section of Vulture’s left wing.

THE ME HALF OF THE EQUATION

Patience is definitely a virtue.  When the Civil War 3-pack hit with its exclusive Spidey, I decided to hold off, guessing that we’d be getting another variation of that costume when Homecoming hit theaters.  And look at that, I was right.  I won’t let it go to my head, I swear.  I found this guy after several days of checking the same few Targets, watching as they added one single new figure at a time to the shelves.  He’s not a perfect figure, but he continues Hasbro’s trend of just genuinely fun Spider-Man Legends figures.

#1407: Beetle – Sinister Villains

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BEETLE – SINISTER VILLAINS

MARVEL LEGENDS (HASBRO)

“When the battle for justice is underway, artificial enhancements make these villains stronger, faster, and even more of a threat.”

Freaking finally!  That took forever didn’t it?  Can we address the insanity that is having to get four Legends-style figures of admittedly lower tier villain the Beetle before we actually got the version of the character that 99% of people who have any clue about the Beetle would be expecting?  Because it’s kind of nuts.  All I can figure is that Hasbro’s just a real big fan of running gags, and consistently delivering the wrong Beetle was just the best one they had going.  But it’s finally over now, and I finally have the Beetle figure I’ve been patiently waiting for.  Yay!

THE FIGURE ITSELF

Beetle is figure 7 in the Homecoming-tie-in assortment of Marvel Legends.  He’s officially named “Sinister Villains,” a name he shares with Tombstone.  I guess it works okay for Beetle, though I’m not sure sinister’s at the top of the list of words I’d use to describe Abner.  I got the figure, so I’m not gonna complain about the name.  This Beetle figure is based on Abner Jenkins’ Mark II Beetle armor.  It’s the design he sported throughout the ‘70s and ‘80s, and even into the ‘90s.  It’s definitely his most prominent design, as well as his strongest.  This marks only the second time this design’s appeared as a toy, following the one from the ‘90s Spider-Man line.  This figure stands about 6 1/2 inches tall and he has 32 points of articulation.  Beetle is built on the Bucky Cap body, or at least a lot of parts derived from it.  The legs and most of the arms are the standard Bucky Cap pieces.  In addition, he’s got Taskmaster’s shoulders, as well as the lower torso of Darkhawk.  On top of all that, he’s got a new head, upper torso, and pelvis.  The head’s a fantastic piece, even better than the old Toy Biz figure’s.  It’s sharp, clean, and very nicely scaled for the body.  The pelvis piece is really just a slightly tweaked version of the pelvis used on Darkhawk, just with Beetle’s belt added on.  The new torso mimics the slightly squared-off nature of the shoulders (aiding in selling this as armor, rather than a spandex jumpsuit), and has two sets of ports on the back for Beetle’s wings and forewings to plug into.  The basic wings are the same ones used on the last Beetle, who in turn got them from Wasp.  They were good pieces both times before, and that certainly hasn’t changed now.  The forewings (which, fun fact, are also known as “elytra” or wing cases) are new to this figure, and can be used in conjunction with or independently of the larger wings.  Personally, I kind of dig the folded up look.  Beetle’s paintwork is really great.  He’s done up in all metallic shades, which looks super sleek, and all of the application is really sharp.  Beyond the wings, Beetle has no real accessories of his own, but he does include one of the Vulture’s wing-turbines.  That’s pretty nifty, I guess.

THE ME HALF OF THE EQUATION

This assortment’s line-up was actually leaked a little while before the prototypes were shown off at Toy Fair.  All we had to go on was the names.  When Beetle showed up on the list, I was pretty sure it was this version, but not certain.  I’ve been tricked before.  Maybe Hasbro would drag us along one more time and roll out a first appearance Beetle.  Maybe they’re sadistic like that.  So, when this guy was shown off, it was like a great weight had finally been lifted.  I was pretty pumped. 

Beetle’s actually the very first figure I found from this series.  I didn’t buy that one, due to not having the money on me at the time, but I found this one about a week later, right after seeing Homecoming for the second time, in fact.  After Moon Knight, he was my biggest want from this series.  I’m glad I found him before Moon Knight, because it allowed me to enjoy him on his own, and not just play second fiddle.  This figure’s really great.  Another strong figure in a line-up of very strong figures.  And now I finally have the Beetle figure I’ve been waiting on for twelve years. 

#1406: Spider-Man – Cosmic

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SPIDER-MAN – COSMIC

MARVEL LEGENDS (HASBRO)

“With incredible strength, stamina and cosmic senses, Spider-Man battles tirelessly on the side of universal justice.”

So, as you may have pieced together from my review of Moon Knight yesterday, I’ve finally tracked down the entirety of the latest Spider-Man Series of Marvel Legends.  This particular series is about half Spider-Men variants, so I’ll be alternating between Spider-Men and non-Spider-Men.  Today’s Spider-Variant actually has roots in another toyline: Micronauts.  Marvel’s tie-in comic for the line added a whole lot of original concepts, including the Uni-Power, an extra-dimensional force that imbues its host with the great cosmic power, thus transforming them into Captain Universe.  The Uni-Power’s been passed around a lot; that’s kind of part of its gimmick.  One of the hosts was Peter Parker, because that’s what happens when you sell the most comics. That’s where today’s figure comes into play.

THE FIGURE ITSELF

Spider-Man (that’s what the packaging says; just “Spider-Man.”  How is the average consumer to know of is cosmic-ness?) was released in the Homecoming-tie-in series of Marvel Legends. In the main universe, Peter gave up the Uni-Power, but there have been a couple of alternate universe versions of him that didn’t.  This figure appears to take the most influence from the Peter Parker of Earth-13, who played a decent role in the “Spider-Verse” event.  The figure stands about 6 1/2 inches tall and he has 32 points of articulation.  This guy marks the second use of the Spider-UK body.  It befits the more powerful and experienced nature of the Earth-13 Peter, and it’s still a favorite of mine.  I hope we see it used for more than just Spider-Men moving forward.  The standard masked head is pretty basic; I won’t be surprised to see it turn up on other masked characters.  It’s a decent enough piece, I guess.  I wish the chin were just a little more pronounced, but it’s a minor complaint.  There are two additional heads.  The first is an unmasked Parker, whose beard signifies that is definitely the Earth-13 version.  He’s not directly patterned on the art of Oliver Copiel (who drew most of Earth-13 Peter’s appearances), going instead for a more general look.  It’s a very nice sculpt, and one of Hasbro’s better human heads.  The second head isn’t a Spider-Man head at all; instead, it’s a more generic Captain Universe head, allowing for this figure to pass for a number of the Uni-Power’s other hosts.  So, if you so desire, this guy doesn’t have to be a Spider-Man variant at all, which is very nice of Hasbro.  The paintwork on this guy is generally pretty solid.  Some of the application could be a little cleaner, but I’m really digging both the metallic blue and the pearlescent white.  It looks really sharp.  In addition to the two extra head sculpts mentioned earlier, Cosmic Spidey is also packed with the outer wing of Vulture’s wing-pack, the mirror of the one included with Moon Knight.

THE ME HALF OF THE EQUATION

Obviously, when this series was shown off, I was a little distracted by the Moon Knight figure, so I didn’t really pay Cosmic Spider-Man much mind.  I actually passed this guy up a few times while I was out on the hunt for the rest of this series, since he wasn’t a priority of mine.  But, after several unsuccessful runs, he was the only figure left at one of the Targets I checked, and I was desperate not to leave totally empty-handed.  I also had a gift card, so that helped.  He’s not a bad figure at all.  Cool concept, cool design, cool execution.  It all adds up to a pretty fun figure.

#1405: Moon Knight

Posted by Ethan Wilson in Reviews and tagged with , , ,

MOON KNIGHT

MARVEL LEGENDS (HASBRO)

“A vision in an Egyptian temple leads Marc Spector to don a silver shroud and become the crime-fighting hero, Moon Knight.”

MOOOOOOOOOOOOOOOOOOOOON KNIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIGHT!!!!!

*ahem*

So, uh, it’s Moon Knight, essentially, is what I’m, uh, what I’m getting at.  Check it out. Yeah.  Right about now.  It’s, uh, it’s Moon Knight.  Comin’ attcha.  Yeah.

Let me tell you, I really like me some Moon Knight.  Well, I really like me some Moon Knight when he’s handled by a competent writer.  Or at least one that doesn’t equate a split personality to being able to write him as literally possessing the personalities of Spider-Man, Wolverine, and Captain America all at once (gee, thanks Bendis).  Current scribe Jeff Lemire is producing one of my favorite runs with the character, and my enjoyment of him is at an all-time high.  Perfect time to release some action figures.  Fortunately for me, Hasbro totally agrees, and has offered Moon Knight in both scales of Marvel Legends.  I already looked at the smaller figure three months ago, and today I’ll finally be following that up with a look at the main event, the new 6-inch scale Moon Knight!  Let’s see how this guy turned out!

THE FIGURE ITSELF

Moon Knight—sorry, “Marvel’s Moon Knight”—is part of Hasbro’s latest Spider-Man-centered series of Marvel Legends, released to coincide with the release of Spider-Man: Homecoming.  No, Moon Knight wasn’t in Homecoming (believe me, I would have made that fact known to everyone I came into contact with), but he’s loosely Spider-Man related, I guess.  I mean, there was that time that Spider-Man was one of his split-personalities (again: thanks, Bendis).  That’s sorta related; demented and sad, but related.  This isn’t Moon Knight’s first time as a 6-inch Legends figure, but it is his first since Series 15 of Toy Biz’s run (a whole 11 years ago). This figure stands just under 6 1/2 inches tall and he has 32 points of articulation.  Like the smaller Legends Moon Knight from earlier this year, this Moon Knight is sporting his most recent costume.  I know some fans were hoping for a classic all white Moon Knight, and while that certainly would have been cool, I still really dig this design. When this figure’s prototype was first shown off, there was a lot of discussion about which of the base bodies he was built on.  In hand, he’s an almost entirely new figure.  And oh boy, does that make for a really sharp looking figure, since it’s allowed for most of the body to be specifically tailored to Marc.  Though the body’s new to Moon Knight, it looks to have been built with re-use in mind.  All of the armored pieces are add-ons, but rather than the usual floating pieces and rubber overlays that we tend to see on lines that rely more heavily on bucks, Moon Knight’s add-ons are all hard plastic pieces affixed to the body with pegs and glue.  The end result looks very clean, and I can definitely see this making for more unique looking figures down the line.  The basic build of the body looks to be somewhere between the 2099 and  Spider-UK bodies, kind of taking up the slot that has typically been held by the faithful Bucky Cap body. The only re-used piece is his head, which hails from the Hulkbuster Series’ Blizzard figure.  It’s just a basic masked head, so it’s pretty sensible, and it’s even been given the all-new hood piece, so even placing the two figures side by side, they won’t look identical.  Speaking of that hood, another selling point of this guy is his separate hood and cape, allowing for better posing options.  His all-new cape works well with the head, and is definitely one of the better cape sculpts we’ve gotten from Hasbro.  Great dynamic flow, but not so crazy as to limit his posing options or get too heavy.  Moon Knight’s paint work looks fairly simple on the outside, but it’s actually really well-rendered when you really look at it.  All of the armored bits are done in a pearlescent white, as opposed to the flat white of the cape and hood.  Also, thanks to the separate pieces used for the armor, most of the pieces are molded in the proper colors, keeping things once and clean.  As an added bonus, the few sections that do require paint apps remember the essential rule of dark over light.  I cannot adequately express how happy that makes me.  Remember how disappointed that the smaller Moon Knight included no extras?  This guy makes up for that in spades.  He’s packed with two sets of hands (fists and gripping), one large moonerang, three smaller moonerangs, and Daredevil’s billy club standing in for his usual staff.  Perhaps my favorite part of all these extras is that the fists have slots between the fingers, allowing for the smaller moonerangs to be placed in-between on one hand or the other.  It makes for a pretty awesome look.  Moon Knight also includes the front of Vulture’s right wing, for those that care about such things.  Oh wait, that’s me!  Nice!

THE ME HALF OF THE EQUATION

Remember how illusive the Warlock Series Cyclops was?  He’s got nothing on Moon Knight.  I’ve been looking for this guy since May.  After three months of searching retail with no luck, I finally gave up and started looking online.  I was fortunate enough to be looking just as Amazon put up a small allotment of him for retail.  Sold.  I’m so happy to finally have this figure, and he’s gonna be giving that 90s Cyclops figure a run for that “favorite Legends to date” spot.  It’s clear that someone at Hasbro’s a very big Moon Knight fan, and its translated into one of the best comic-based Legends that Hasbro’s ever produced.