Flashback Friday Figure Addendum #0036: Wolverine – Prisoner & Kenuichio Harada

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , , , ,

WOLVERINE — PRISONER & KENUICHIO HARADA

MARVEL MINIMATES (DIAMOND SELECT TOYS)

Last week’s Marvel Minimates Flashback Friday Figure Addendum went so well, I’ve decided to keep it going.  Honestly, I’ve got things mapped out far enough ahead that I would have kept it going anyway.  It’s my site, and all.  So, I’m going back to the very early days of the site, with a set that’s noteworthy for being the first set of Minimates I reviewed new for the site.  That’s pretty nifty!  Of course, it’s stuff from The Wolverine, so maybe let’s not let “nifty” take us too far.  Anyway, here’s Prisoner Wolverine & Kenuichio Harada!

The Wolverine was released this summer.  It was a sequel to X-Men 3, and it was one of those few times that a movie actually manages to make its predecessor better, not by making it look better by comparison, but by retroactively adding some emotion to a lackluster film.  The Wolverine was not a perfect movie, but it wasn’t bad either.

Like most of the recent Marvel movies, Diamond Select Toys did a selection of figures from their Minimates line in order to tie-in with the movie.  Like previous movies, this one was given a comic book store assortment, and a Toys R Us assortment.  I’ll be taking a look at one of the sets from the Toys R Us assortment today.

The characters featured are, of course, Wolverine himself, and somewhat antagonist, Kenuichio Harada.

THE FIGURES THEMSELVES

Like I said above, these guys were released as part of the Toys R Us tie-in series for The Wolverine.

WOLVERINE (PRISONER)

First up is the titular character.  Wolverine is depicted here in his “prisoner” look, which is what he’s wearing during the WWII era flash-backs in the film when he is a POW in Japan.  There’re some important scenes that feature him with this look, so it’s not surprising to see it pop up here.  It’s a bit odd to see it packed with Harada, but it’s not a huge deal.  The figure is once again built on the basic Minimate body, standing about 2 ½ inches tall and featuring 14 points of articulation.  He features sculpted hair and claws and a sculpted belt.  I’m not 100%, but I’m fairly certain that the claws are a reuse from a previous Wolverine.  The other pieces are new, although the hair piece was also used on two of the three other Wolverines in the wave.  Wolvie is mostly molded in the appropriate colors, but the paint still makes up most of the detailing.  It’s well done and fairly intricate.  The face on this version is fairly calm, which is okay, since Wolverine kept pretty calm during the captivity scenes.  The Hugh Jackman likeness is better than some of the one’s we’ve seen in the past, but not quite dead on.  Wolverine includes the sword he was presented by Yashida, a display stand, and three sets of hands:  one regular, one clawed, and one bone clawed.  The Adamantium claws aren’t scene accurate, but I appreciate that they give people the option to choose.

KENUICHIO HARADA

Next is Japanese Hawkeye  Kenuichio Harada, technically an antagonist, but an unwilling one, making him more of an anti-villain.  He’s shown here in his ninja gear from the film, which is what he spends most of his screen time in, so it makes sense.  Like Wolverine, he’s built on the basic Minimate body, meaning he stands about 2 ½ inches tall and has the standard 14 points of articulation, although his hair restricts the neck joint a bit.  Harada has a sculpted jacket and hair, as well as wrist pieces to simulate the ends of his gloves.  The hair and jacket are new pieces, although the jacket is shared with the Black Clan ninjas also in this wave.  The hair seems a bit off for the character, whose hair was far less bulky in the film.  It looks right in the control art on the box, but something seems to have been lost in translation.  Paint wise, he’s really only got the detailing on his face, which is passable.  The likeness isn’t as good as Wolverine’s, but it isn’t too bad.  Harada is rounded out with his trusty bow, two arrows, an alternate masked head, and a clear display stand.  The Bow and arrows appear to be reused from one of the Haweyes from last year, and the head is identical to the head on the Black Clan ninja.

THE ME HALF OF THE EQUATION

Oh boy.  Hold on tight guys, it’s another tru.com story.  Yeah, so I’m always uncertain as to whether my local TRU will get their exclusive wave, so I tend to order online.  I’ve mentioned before that tru.com has a tendency not to put up pictures or label their sets correctly, making online ordering difficult.  But it’s okay, as long as you have the proper sku code, which allows you to go directly to the corret product page.  And that’s how I ordered this set and the other exclusive set from this wave.  Unfortunately, I seem to be smarter than tru’s online store, as they still sent me Wolverine and Shingen in place of this set.  And that’s not cool because Shingen kinda sucks.  Anyway, I ended up having to drive to my local TRU and exchange it.  Which is what I was trying to avoid.

Oh well, I have them now.  Which is good, because Harada was my favorite character in the film and I’d be bummed to have missed out on him.

Well, I was somewhat complimentary of The Wolverine.  It was still new and fresh in my mind, and Days of Future Past hadn’t come out to reset my expectations of the X-Men movies, so I was rather positive.  I don’t know I’d be as positive now, but admittedly, I haven’t watched the movie since 2013, so it’s hard to truly gauge.  My review’s honestly pretty much spot-on beyond that.  I got the Minimates reviews down pretty quickly, as you can see.  I had personally forgotten a lot of my TRU.com-centered diatribe.  Seven years without them has let me forget how frustrating dealing with them could be.

#3889: C-3PO with Removable Arm

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

C-3PO with REMOVABLE ARM

STAR WARS: POWER OF THE FORCE II (HASBRO)

I keep getting distracted from actually writing today’s review.  I mean, sure, I tend to get distracted from writing reviews a lot; such is my life and all that.  But, this one I kept trying to come up with an angle for an intro, and then I’d go to double check something, and suddenly it would be days later.  At one point, I got into a whole thing about which Star Wars character had the most reviews on the site (it’s Luke, by the way), which resulted in me also noting that C-3PO has had less reviews than any OT main character other than Yoda (who is himself beaten by Wedge of all people).  So, I guess maybe I should get those numbers up?  Well, at least one more, anyway.  On we go!

THE FIGURE ITSELF

C-3PO with Removable Arm was released as part of the “Flashback Photo” set of Power of the Force, with the second batch go figures that hit in 1999, just before the proper Episode I line launched.  3PO continued the set’s heavy focus on A New Hope, as he’s based on his appearance in the movie just after the Tusken Raider attack.  The figure stands just under 3 3/4 inches tall and he has 6 points of articulation.  His sculpt is unique, but admittedly rather similar to the other later run 3POs from the line.  This one, however, does have the odd quirk of his weirdly elongated head.  It seems strange that after getting it more or less right so many other times, that this one’s so…odd.  Otherwise, it’s a decent enough sculpt, with plenty of detailing going into it all.  The left arm is designed for removal, mimicking his loss of it in the scene he’s referencing, and the articulation’s a little bit different to accommodate this.  Per the usual treatment, 3PO is vac-metalized, but he goes a bit further on top of that, getting a fairly extensive amount of paint accenting for the dirt and sand he builds up while on Tatooine.  C-3PO is packed with only his flashback photo, showing 3PO from both the original film and Episode I.

THE ME HALF OF THE EQUATION

C-3PO sort of fell into the big batch of these guys I picked up in 2019.  I didn’t honestly think much of him at the time.  That said, in my first real push to get them opened and displayed, I decided he’d be the best fit for my Jabba’s Palace playset display, so that’s where he went.  Shortly after my son Matty moved in with me, his room was still housing my Power of the Force collection, and he wanted toys to play with, so I let him mess with them.  Since the left arm was removable on this guy, Matty assumed the right was too, and snapped that sucker clean off.  He and his mom were both absolutely mortified that he’d broken one of my figures, but I personally just laughed it off, and let them both know he was a relatively cheap figure.  I had picked up a replacement, but ultimately just fixed the one I had, because I still enjoy the story, and it gives the figure more weight than he might otherwise have.

Shoutout to All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3888: Magne Edison

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MAGNE EDISON

MICROMAN MAGNE POWER (TAKARA)

The success of GI Joe in the ‘60s in the US led, unsurprisingly, to an export of the line to other countries.  Nowadays, lines are largely produced by one company even internationally, but there was a lot more licensing out back in the day.  Palitoy had great success with Action Man, a line that stuck pretty close to the spirit of the original line.  In Japan, however, Takara had to get a little more inventive.  As materials were scarcer, the figures could not be easily clothed, so to avoid selling a naked figure, the molded them in clear plastic and filled the hollow sections with “machinery,” creating Henshin Cyborg. It was quite a success, leading to the creation of a smaller scale equivalent, Microman.  That line would itself be imported back to the US by Mego as Micronauts, which picked up a dedicated following.  There have been attempts at relaunching Micronauts over the years, always falling shy of success.  The first of these attempts was in the late ‘90s, by Takara themselves.  But, when a US market failed to materialize, the Micronauts angle was dropped, leaving just the Microman component.  Alas.  Well, at least there were cool toys!

THE FIGURE ITSELF

Edison is figure 004 in Takara’s Microman Magne Power line, released in 1999.  He’s the second to last of the five-man team that made up the core focus of this new line.  The figure is about 3 inches tall and he has 12 points of articulation.  The Magne Power line was unique in its scaling; they weren’t the traditional 3 3/4 inch figures, but a bit smaller.  All of the original five were identical sculpts from the neck down.  It’s a sculpt that’s certainly a product of its time, with some rather pronounced proportions, and the very awkward magnet arm attachment on the left arm that removes the elbow joint.  It’s an interesting offering, especially so close to the immensely revamped Microman base body Takara would transition to very shortly after.  It feels like the last hurrah of the older style.  Each of them got a unique head.  In Edison’s case, it’s a helmet, patterned on a sort of grasshopper style.  It’s a little goofy, but certainly fun.  Edison’s primary color is green, so there’s a lot of that.  He’s got a mix of translucent and opaque, as well as some yellow and gold accenting.  And, of course, he’s got the chrome head, which is always super cool.  The standard figures didn’t get any extras, but they do have magnets in their left hands and torsos, which are fun for sticking them to fridges or metal shelves and the like.

THE ME HALF OF THE EQUATION

Since the US distribution failed on these, they were kind of unknown on this side of the world.  I only learned about them in 2011, when the Micronauts guy at Mego Meet brought up the planned relaunch of the line in his presentation, and had Edison as his sample figure for what the line looked like.  I was intrigued, and also happy to find that they weren’t an especially expensive line of figures.  Edison’s got a neat vibe, similar to Bug from the Marvel tie-in comics, and I really like that.  He definitely appeals to what I loved about the original line.

#3887: Guy Gardner

Posted by Ethan Wilson in Reviews and tagged with , , , ,

GUY GARDNER — MOVIE

SUPER POWERS (McFARLANE)

I’m writing this review from the…well, okay, it’s not the distant past, but it’s a few days removed, at the very least.  What it mostly means is that I’m writing this review just a few hours after having seen Superman at the theatre.  It’s good, guys.  It’s really, really good.  The film boasts a truly impressive supporting cast, and the most colorful of that cast is the Justice Gang, which includes James Gunn regular Nathan Fillion finally in the role of Green Lantern in live action.  Of course, it’s not Hal Jordan like we’d all campaigned for, but rather Guy Gardner, making his live action debut.

THE FIGURE ITSELF

Guy Gardner (Movie) is part of Series 12 of McFarlane’s Super Powers line, the third of the five movie-based figures in the assortment.  This is Guy’s second time in the line, following up on his comics version from last year.  The figure stands just over 4 1/2 inches tall and he has 7 points of articulation.  Structurally, he’s very similar to last week’s Mr. Terrific figure, using the same smaller base body and jacket piece.  The two definitely have rather different builds in the movie, and Guy should ideally be on a larger body.  But, of course, then he wouldn’t be able to share the jacket with Terrific, and that would be extra difficult, I suppose.  He gets a new head and belt as well.  They’re not bad.  The head is like the others in this set, where it doesn’t have a direct likeness, but it also doesn’t look *unlike* Fillion, so it works well within the established style and also looks unique from the non-movie Guy.  The new belt gives him his Lantern insignia belt buckle, which is a fun little touch.  Guy’s paint work is actually pretty decently handled, capturing all the main elements of the costume design, while also giving him a pretty sharp application on all the painted elements.  Guy is without any sort of accessories; the traditional extra for this line is a power battery, but he doesn’t have one in the movie, so the omission’s understandable.  That said, he does still feel rather light, especially given how heavy he is on the parts re-use.

THE ME HALF OF THE EQUATION

As much of a GL fan as I am, I’ve never been much for Guy Gardner, who I am on record as stating is my least favorite Earth Lantern.  So, I didn’t get around to snagging his standard comic figure from this line.  But, I do like Nathan Fillion, and I do think Guy works in the appropriate setting.  The movie certainly put him in the appropriate setting.  The figure’s not anything tremendously ground breaking, but he’s still pretty fun, and I really have no major complaints.

#3886: Human Torch

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HUMAN TORCH

MARVEL SUPER HEROES (TOY BIZ)

While three members of the Fantastic Four were entirely new identities and concepts for Marvel, Johnny Storm, aka the Human Torch, had a repurposed name and power set from one of Marvel’s first super heroes.  Unlike Jim Hammond, however, Johnny was actually *human* so perhaps the title fits better?  Of course, because of the repurposed name, this meant that Johnny got tied up in rights issues that didn’t plague the rest of the team, leading to his absence from the ‘70s cartoon, and the eventual creation of HERBIE.  But, it’s never seemed to be an issue in the area of toys!  

THE FIGURE ITSELF

Human Torch was released in Series 3 of Toy Biz’s Marvel Super Heroes line, which, as I noted in last week’s Thing review, was an entire FF-dedicated set of figures.  This was Johnny’s second figure, following his Mego from the ‘70s.  The figure is a little under 5 inches tall and he has 5 points of articulation.  Like Ben, he’s rather under articulated compared to most Toy Biz figures of the era.  His general posing is also rather similar to that figure, so I guess they’re at least kind of thematic?  Torch is slightly on the smaller side, which honestly makes a degree of sense, with him being a younger member of the team and all.  He’s fully flamed-on, as was the standard approach at the time.  It’s a slightly different take on it.  It’s got elements of the costume details beneath, notably the belt, visible, as well as sculpted etching for the “heat lines” he usually sported in the comics.  Honestly, the whole thing works better than you might expect.  Fire’s hard to sculpt, but it’s not bad.  Johnny’s paint work is sort of basic; it’s mostly just molded red, but there’s some basic yellow paint as well.  It’s applied decently enough, with no major slop.  Johnny is packed with two fireball pieces, which can be held or rather awkwardly mounted on his back.  His right arm’s got a spring-loaded feature, so you can pull it back and it “throws” one of the fireballs.  It’s very much on the basic side, but it works okay.

THE ME HALF OF EQUATION

Like Ben, this Johnny had largely dried up at retail by the time I got into collecting, so my first Johnny was the Series 4 version.  This one I got slightly later, probably in the early ‘00s, purchased loose from a comic book store that I’m rather certain isn’t around anymore.  I got the fireball pieces later, in the last few years, and now he’s all complete.  He’s an interesting figure, sort of basic and all, but he works better than most other fully flamed-on Johnny figures we’d end up getting.

Flashback Friday Figure Addendum #0035: Mandarins & Dreadnought

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , ,

MANDARIN(S) & DREADNOUGHT

MARVEL MINIMATES (DIAMOND SELECT TOYS)

You know, for as many Minimates reviews as I wrote in the early days of the site, I haven’t resisted a single one of them for the purposes of a Flashback Friday Figure Addendum.  Oh, sure, I’ve revisited them for *other* sites, but…well, they’re not around anymore.  Sad.  Anyway, here’s a look back at the Dreadnought and the Mandarins!

Today, it’s another look at the behemoth that is Marvel Minimates!  This time, we’ll be looking at Iron Man’s number one foe Mandarin in both his Modern and Classic looks, as well as his villainous robo-minions, the Dreadnoughts.

THE FIGURES THEMSELVES

The two Mandarins and the Dreadnoughts were released as part of the 36th series of Marvel Minimates, in order to tie in with 2010’s release of Iron Man 2.  Modern Mandarin was the regular set, with the Classic version as the one-per-case variant.

MODERN MANDARIN

First up, it’s the look that most would consider the definitive Mandarin, the “Modern” version.  This figure is based on his appearances from roughly the early 90s onward.  As usual for the line, Mandarin is built on the basic Minimate body.  He stands roughly 2 ½ ‘’ tall and has 14 points of articulation.  Instead of regular hands, Mandarin features sculpted claw like hands featuring his ten rings.  Mandarin also has a sculpted hair piece, robe, and sash.  I believe the sash is a reuse from an earlier figure, but the robe and hair are new pieces.  They are well done enough, though with the robe on, Mandarin is pretty much limited to standing with his arms raised, due to the robe’s solid construction.  This is less an issue with the figure itself, and more an issue with translating the design.  The ToyBiz Marvel Legends figure based on this design has the exact same issue.  Regardless, the robe can be removed, revealing a completely detailed torso underneath, if you desire to show off Mandarin sans robe and shirtless.  Whatever floats your boat…

CLASSIC MANDARIN

Next is the alternate look for the Mandarin.  This is the original design for the Mandarin from when he first appeared in the 60s.  I’m much more of a fan of this design and the resulting figure.  I know some people would find this design cheesy, but that’s the Mandarin for me.  Over the top cheesiness.  The figure’s the same basic body, standing about 2 ½ “ tall and featuring 14 points of articulation.  This Mandarin features the same sculpted hands as the previous one, which is fine as they suit the same purpose here.  Classic Mandarin features a sculpted mask, cape, wrist bands, sash/tunic combo, and cape.  All but the mask is reuse here, with the cape comic from Mephisto, the writ guards from Ocean Master, and the sash from Dr.  Strange.  This isn’t a bad thing, though, because all the reused parts work very well for their intended purpose.  The mask is well done, and accurately depicts Mandarin’s mask from the early comics.  Mandarin also includes an alternate hairpiece so that you can show him unmasked.  The detailing on the figure is nice, especially the face, which has a nice crazed expression which really works great for the character.

DREADNOUGHT

Last up is the robotic Dreadnought!  A dreadnought was included with both versions of the Mandarin, which is great for those who want to do the whole army building thing.  Like the other two figures, the Dreadnought was built on the basic Minimate body.  He stands about 2 ½ “ tall and features 14 points of articulation.  In place of the basic parts, the Dreadnought features a sculpted head and hands.  The head is an all new piece, but the hands are a reuse from Viggo the Carpatian.   The Dreadnought also features a set of sculpted boot tops which I believe are a reuse from the Dark Avengers Ares.  The paint is relatively basic, but it is well done.  Plus the metallic blue is just so awesome!

THE ME HALF OF THE EQUATION

These guys were picked up at their time of release from my local comicbook store, Cosmic Comix.  I think the Mandarin is meant to be the main draw of these sets, but I actually really like the Dreadnoughts a lot.

You know, it’s an early review, only hitting during the second month of the site, but it’s really not a badly written review, all things considered.  I do, however, have a few notes.

Modern Mandarin was missing his gold wrist bands when I reviewed him, as well as his only accessories, a spare set of hands, the same as his normal ones, but in a pale green instead of flesh tone.  Apparently, these are a reference to when Mandarin lost his hands and had to grow new reptilian ones or something?  Can’t say I’m familiar with the story, but the extras are certainly nice to have.

Classic Mandarin I incorrectly identified as having an alternate hair piece, which he actually did *not*.  In fact he has no accessories at all.  That said, with all of the add-on pieces already used on the figure, he doesn’t feel too light.

The Dreadnoughts accessories were also left out of my original review.  They each get two arm attachments: a blaster arm and a hammer arm.  Both are re-used, with the blaster coming from DC’s Cyborg, and the hammer coming from the Avengers #1 Iron Man, and they offer up some nice customization potential, to keep the Dreadnought army from getting too same-y.

#3885: Emperor Palpatine

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

EMPEROR PALPATINE

STAR WARS: POWER OF THE FORCE II (HASBRO)

Somehow, Palpatine retuned.  Yep, that’s pretty much what I got.  Here’s the deal, guys: I get that Sheev Palpatine is very important to the Star Wars mythos, and all, and there’s no denying that Ian McDiarmid turns in a good performance in the part, but I just can’t get all that excited or invested in him.  I don’t know, maybe he’s just too realistic of a villain.  He’s also not terribly exciting when it comes to toys, but that hasn’t stopped him from getting *so* many of them.  There were five of them in Power of the Force.  Here’s one of those.

THE FIGURE ITSELF

Emperor Palpatine was released in the 1998 portion of the Power of the Force Flashback Photo series.  As with all of the others in the set, he represents the official take over of Hasbro on the branding, meaning this is the first Hasbro Palpatine.  The figure stands 3 3/4 inches tall and he has 6 points of articulation…in theory.  He’s got joints at the neck, shoulders, waist, and hips (a first for him in this line), but the neck is limited by the hood, and the hips are effectively not even there, since they’re completely encased by the robes.  His sculpt’s not drastically different from the other Palpatines, but he’s notably a little more technically advanced, with slightly sharper detailing, and proper layering to his outfit (which actually includes legs, again a first for him).  He’s rather pre-posed, following the same general lead as the Power F/X figure, but there’s a slightly more natural feel to it.  Unfortunately, perhaps the biggest drawback to this new sculpt is that it doesn’t stay standing all that well, something the previous single-card did very well.  His coloring largely follows the same path as the other figures of him, but there’s a little more variety to the colors on his robes.  Otherwise, we’re dealing with the same rather thick paint on the face, and he’s generally not super eye-catching.  But, they’re doing their best with what they’ve got.  Palpatine is packed with a little sampling of his “UNLIMITED POWER!!!!!!!!!!!!!!!!!!!”, in the form of two force lightning effects pieces, which plug into his sleeves.  They work okay, but they certainly don’t help with his issues of stability.  He also gets the flashback photo thing, which shows Palpatine from both Return of the Jedi and The Phantom Menace.  Spoilers!

THE ME HALF OF THE EQUATION

I don’t vividly recall getting this one, honestly.  I’d imagine I got him in a batch of others, because that’s about the only way I buy a Palpatine figure.  Like a bunch of the other Flashback Photo figures, he’s been sitting there unopened for about seven years, only being opened just before I wrote this review.  He’s fine.  Probably the best Palpatine from the line, at least talking technically.  I dislike that he can’t stand on his own, but I can at least provide an extra stand to offset that issue.

Shoutout to All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3884: Corporal Hicks

Posted by Ethan Wilson in Reviews and tagged with , , ,

CORPORAL HICKS

ALIENS (KENNER)

I very recently revisited my first discussion of Aliens here on the site, and in that, I realized that I directly reference in that review a figure that I’ve not actually reviewed here.  The crazy thing is that it’s an Aliens figure, and it’s a Hicks figure, so it feels crazy that I’ve somehow managed to miss it up to this point.  Well, it only feels right to finally get around to fixing that issue now.  So, without further ado, let’s finally look at the basic standard Kenner Hicks figure!  

THE FIGURE ITSELF

Corporal Hicks was one of the Colonial Marines released in the original series of Kenner’s Aliens line, originally released under the Operation: Aliens title, before being adjusted back to the film’s original title.    The figure stands about 5 inches tall and has 6 points of articulation.  All of the Colonial Marines got a lot of adjusting and changes to their designs for Kenner’s line, but Hicks probably comes out the most unscathed.  There are still certainly a lot of smaller changes to the exact layout of the armor and exactly what makes up most of it, but at the same time, he still passes the squint test of the the “classic” Hicks look, I feel.  The head’s a nice enough piece, and compared to a lot of the other humans in the line, actually looks passably like Michael Biehn, so you can tell who he’s supposed to be.  The bulk of this sculpt got re-used for O’Malley later in the line, and was repainted in its entirely for the 10th Anniversary Hicks figure in ‘’96.  Hick’s paint work is honestly pretty solid.  It’s basic, and again has some change-ups from the movie look, but at the same time, it keeps the general theme pretty much there, and it doesn’t go as radically ‘90s as some of the others in the line.  Hicks is packed with his “Alien-ator” missile launcher with two missiles to go with it, as well as the sort of odd claw-arm attachment, which can also be flipped around for use as a more conventional rifle sort of thing.  He also included a sheet of stickers for the purposes of customizing his armor, much like the Marines in the movie.

THE ME HALF OF THE EQUATION

My first introduction to the Alien franchise was Alien Resurrection, which I caught on TV when I was 10.  That was enough to get 10-year-old me invested, so I went back to watch the others.  In the process, I also wanted toys, because of course I did.  I bought Ripley after seeing Alien, but before Aliens, and then, because he was the other figure that Cosmic Comix had, I went back and got Hicks, before even knowing who he was.  Look, I just had a good feeling about him.  It certainly played out in my favor, though.  This guy was my favorites of the Kenner run, and he kind of still is.  He’s not as showy, but he’s just kind of a nice, solid figure.

#3883: Mr. Terrific

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MR. TERRIFIC — MOVIE

SUPER POWERS (McFARLANE TOYS)

“Mr. Terrific wields his trademark T-spheres – small, multi functional metal orbs the size of tennis balls which he controls with complex hand signals.”

The JSA’s coverage in the vintage Kenner Super Powers line consisted of exactly one figure, but McFarlane’s continuation’s done a really good job of getting those numbers up.  Today’s figure is *technically* a continuation of that, in the sense that it’s Mr. Terrific, who *is* a JSA member, but also he’s a movie figure, and a modern JSA member, contrasting the otherwise Golden Age membership up to this point.  Personally, I’m taking what I can get.  I’m hard-pressed to complain about getting any version of Mr. Terrific.

THE FIGURE ITSELF

Mr. Terrific (Movie) is part of Series 12 of McFarlane’s Super Powers line, which is a whole assortment based on the Superman movie hitting at the end of the week.  Terrific looks poised to be a notable part of the movie, so he’s a very sensible choice.  He’s also one of two movie figures to not have a comics-equivalent already in the line, but his costume design is close enough that you could certainly use him as a comics stand-in, were you so inclined.  The figure stands about 4 1/2 inches tall and he has 7 points of articulation.  Terrific’s using the smaller Flash-based body, which is a decent enough match for him, at least in terms of just basic build.  It’s not a bad base body, so I can’t really knock it.  He gets a new head, jacket, and belt.  The head, much like the Superman head, has a resemblance to Edi Gathegi, but not really a proper likeness.  It’s a bit on the large side again, and I do wish that there was any sort of texturing on the hair, but it’s generally an okay sculpt.  The jacket and belt are more on the basic side, but both sit well on the body.  In terms of coloring, the figure’s got a fair bit going on.  It’s a bit of a mixed bag in terms of how well things work.  I do like the logos and writing on the torso, jacket, and arms.  An unfortunate downside of this figure’s assembly, namely the visible pins at the knees in contrast to the way Kenner did it, means he winds up with rather obvious black pegs on the inner knees, which isn’t great.  I was initially going to complain about just painting over the boots as if they weren’t there, but that’s accurate to the movie, so good for them on that one, I suppose.  Accessories aren’t standard with these guys, but a T-Ball would have been cool.  As it stands, if you want anything to go with him, you’ll have to buy the T-Ship for him.

THE ME HALF OF THE EQUATION

I’m a fan of Mr. Terrific in general, regardless of which version.  While I was low-key hoping for a Terry Sloane to go with the other classic JSA-ers, I also don’t mind getting Michael in the slightest.  He was definitely one of my primary interests jumping into this set.  He’s perhaps not the most outwardly showy and impressive figure, but he’s still fun, and he’s a more unique design for the line.

#3882: The Thing

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

THE THING

MARVEL SUPER HEROES (TOY BIZ)

“The Thing’s super-strength, rock-hard skin and never-say-die attitude make him an invaluable ally in a fight. And his loyalty, heart-of-gold and great sense of humor make him the best friend anyone could have. Before he became the Thing, Ben Grimm was a top test pilot. Now he flies the Fantastic Four wherever super-trouble erupts.”

Last week, I discussed the pending release of the first of the two Super Hero movies this month, Superman.  This week, I’m starting my build-up to the *other* movie, hitting at the end of the month, Fantastic Four!  The FF have have rather a storied history in terms of movies (including two movies directed by a guy named Story….), at best rising to “okay,” but never truly living up to the potential of the team as showcased in the comics.  It is my very distinct that this one is the one that breaks the curse.  The actual movie tie-ins haven’t quite hit yet, so I’m gonna just stick to my recent formula with some vintage Toy Biz reviews.  Here’s Benjamin Grimm, the ever-lovin’ blue-eyed Thing!

THE FIGURE ITSELF

The Thing was released in Series 3 of Toy Biz’s Marvel Super Heroes line, which was a whole assortment devoted to the FF and their associated characters.  It was Ben’s first figure under Toy Biz, and only his second figure, following up on the Mego.  The figure stands just over 5 inches tall and he has 5 points of articulation.  He’s by far TB’s least articulated take on Ben, owing largely to them still not quite having a firm handle on where they were going with articulation.  He gets the basic 5, and even then, one of his shoulders is a but hindered by his action feature.  He’s notably small for Ben, especially a ‘90s Ben, where he was really getting scaled up.  Instead, his stature and build feels a lot more like an early career Ben.  The slight softness of the sculpt kind of adds to that.  To my eye, he looks a lot like the Hannah-Barbera Thing, which, honestly, I don’t hate.  Despite being a departure, he still very much feels like the Thing, and that’s what’s most important.  His color work is generally basic.  The orange is all molded plastic, and it’s admittedly rather on the yellow side of shading.  Certainly more than I’m used to.  There’s no accenting or anything, so the already soft sculpt feels even softer, which is a bit unfortunate.  He’s sporting his Byrne-era colors for the costume, which was still current at the time.  It’s actually a dark blue, rather than the very bright shade they kept going with later, so it feels more authentic than Toy Biz’s other versions.  Ben is packed with a rather neat street sign accessory.  It’s bent and breaks into two pieces, and it even says “Yancy Street” at the top, which s a really neat character touch.

THE ME HALF OF THE EQUATION

As a kid, my first Ben was the disguised version from Series 3 of the cartoon line, which was the current version when I got into collecting.  He remained my only figure of the character in this scale for my entire childhood.  This figure was actually my brother’s, which he bought from Cosmic Comix some time in the mid-00s.  When he scaled down his collection after high school, I happily absorbed this guy into mine.  He’s a different sort of figure, and not really your conventional take, but I like him a lot.