#2722: Thanos

Posted by Ethan Wilson in Reviews and tagged with , , , ,

THANOS

MARVEL MINIMATES

Back before he was a major movie star headlining two of the biggest movies of all time, Thanos was sort of an odd-ball who was rather hard to place when it came to toy lines.  Like, he was around, and some people knew him, but you had to sort of sneak him in there, lest someone notice his presence.  Such was the case with his original Minimate release, which was one of the early line’s sort of odd floater figures for a bit, much in a similar fashion to last week’s Dark Phoenix.  He finally made it out, of course, and there have been a bunch of subsequent releases at this point, but it did take a bit of doing.

THE FIGURE ITSELF

Thanos was released as a San Diego Comic Con-exclusive Marvel Minimates release in 2005, packed alongside yet another reissue of the original Silver Surfer (albeit this one with C3 feet, rather than the long ones).  He had been shown off a few times prior over the preceding years, and before 2099’s inclusion was cemented in Series 7 of the main line, it was assumed he’d be in that slot.  Then he…wasn’t, and everyone was confused for a bit, until this exclusive surfaced the following year.  Hey, at least he got released, I guess.  The figure is built on the C3 base body, and he stands 2 1/4 inches tall and has 14 points of articulation.  Thanos has four add-on pieces for his helmet, chest cap, and gloves, all of them new to him.  These pieces are pretty nicely handled; they get the character’s usual design elements down, while also keeping him in line with this earlier line aesthetic.  They all sit pretty well, and he looks generally uncluttered.  I quite enjoy the simplicity of the Infinity Gauntlet here; later releases would go for the separate fingers, and it always wound up looking weird.  Thanos’ paint work falls into a similar boat as the Dark Phoenix and Cyclops; there’s a lot of detail and creative shading, but it doesn’t feel like it goes too overboard.  Thanos included no accessories of his own, unless you want to be rather demeaning to that Silver Surfer figure.

THE ME HALF OF THE EQUATION

I still wasn’t really in on the exclusive game yet with this one, and I already had the standard Silver Surfer, who was my preferred figure out of this set, so I didn’t really try that hard to get this Thanos.  However, when the rather large Minimate collection came into All Time in 2019, and this guy was there, I opted to go for it, because, hey, why not.  I like the simplicity of this Thanos compared to others.  I think he’s one of those characters that they really got right the first time.

#2721: Hawkman

Posted by Ethan Wilson in Reviews and tagged with , , ,

HAWKMAN

FIRST APPEARANCE (DC DIRECT)

“Archaeologist Carter Hall discovered that he was the reincarnation of ancient Egyptian Prince Khufu in 1940’s Flash Comics #1!Using an experimental antigravity metal, Hall took flight as Hawkman!”

In the Golden Age, comic books were still very much periodicals in the vain of the pulp magazines that inspired them, with multiple features in each book.  For the most part, the earliest appearances of the heavy hitters only got one notable stand out per book; no one’s really talking much about the characters that were backing up Superman and Batman in Action and Detective.  However, there were a few instances, especially as they get into that slightly lower tier selection, where multiple characters might share their first appearance.  For instance, while Jay Garrick’s The Flash headlined the first issue of Flash Comics, also debuting in that same issue was fellow JSA member, Hawkman, who I’m taking a look at today!

THE FIGURE ITSELF

Hawkman was part of the second series of DC Direct’s First Appearance line.  We’d gotten just one Hawkman from DCD previously at this point, and he was specifically the Silver Age version of the character (albeit one that happened to included a second, Golden Age-inspired helmet), as had all prior versions of the character in toy form.  The figure is approximately 6 1/2 inches tall and he has 13 points of articulation.  Like Alan, he got to keep those extra wrist joints that the Series 1 figures had been lacking, plus he had the extra added joints of the wings.  Hawkman’s sculpt was technically all-new to him, though I’ve actually looked at a lot of it previously, when it was re-used for the ReActivated! Hawkman.  Of course, that being a review from my first month of reviewing, I didn’t actually, you know, really review it.  It’s a rather nice sculpt. It’s got nice, balanced proportions, and does a respectable job of capturing Dennis Neville’s illustrations of the character from the interiors.  The head and wings are the notable changes between the two releases of the mold.  This one’s been designed to include a removable helmet, which is quite nicely handled.  Both the helmet and the underlying head work well together, with neither being too oddly scaled.  Additionally, the wings on this version are designed for more easy removal, and to also more resemble the original intent, where they were more of a glider set-up.  As such, they’re a little flatter, lack the more overt feather detailing, and have a connection via pegs, rather than the ball joint set-up of later figures.  It’s not going to be getting many killer poses or anything, but it does mean you can have a much more dressed down Carter Hall.  Following in Flash’s footsteps from the first series, Hawkman is the one figure in his set that doesn’t feature any cloth parts, mostly because, exactly what would you use them for?  He’s not exactly overly clothed.  Hawkman’s paint work is bright, colorful, and clean, and he’s got some nice variation, especially on the yellows and reds, which have two differing sheens, depending on where they are.  Hawkman’s definitely the best accessorized of the line up to this point, with the previously mentioned removable helmet and wings, as well as a dagger, shield, stand, and reprint of his portion of Flash Comics #1.  Compared to the others, his assortment definitely feels more all-inclusive.

THE ME HALF OF THE EQUATION

At this point in my collecting, my dad and I were still kind of sharing a DC Direct collection, so we’d usually split any given assortment of figures.  When Series 2 was released, we got a full set, but Hawkman wasn’t one of the two I got out of that.  I wound up getting one of my own later down the line, under the same circumstances as the Flash figure I looked at earlier this month.  I actually do quite like this figure, even if Hawkman himself has never really been one of my favorites.

#2720: Bat-Tech Batman & The Joker

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BAT-TECH BATMAN & THE JOKER

BATMAN: THE CAPED CRUSADER (SPIN MASTER)

So, did you guys here about that exciting new DC-related thing that dropped last week?  It was pretty big.  It had Batman and Joker, and some others as well from what I hear.  Lot of time in the making.  I am, of course, referring to the latest assortment of Spin Master’s Batman: The Caped Crusader, dubbed “Bat-Tech,” which gives us some new, teched-out variants of the main players.  What else could I possibly be talking about?  Amongst these teched-out variants are, unsurprisingly, Batman and Joker, who are sort of headlining this whole thing.  I’ll be taking a look at the two of them today!

THE FIGURES THEMSELVES

Bat-Tech Batman and Joker are both part of fifth series of Spin Master’s The Caped Crusader line, which is the first official assortment of 2021.  The two of them both key into the whole “Bat-Tech” theme of this assortment, and the whole line has been slightly rebranded, with a new packaging set-up.  They’ve kept the same general look and feel, including the blind boxed accessories, but the whole thing is slightly more refined, and just generally different.

There are three different Batmen in the main assortment, but this one’s the one that officially carries the “Bat-Tech” name, and is really the one that most clearly evokes that wacky variant feel.  This particular Batman design doesn’t really have any direct ties to the comics that I know of, but instead does sort of a Tron-esque tech suit thing, which is mostly black, with some bright blue mixed in.  I dig it.  I dig it a lot.  The figure stands about 3 3/4 inches tall and he has 17 points of articulation.  I’ve had some issues with stuck joints on some of these guys previously, but I had no such issues for this guy, which I definitely appreciated.  He’s an all-new sculpt, rather than borrowing from one of the previous Batmen.  He’s slightly armored up, but in a different fashion than the two prior armored Batman designs.  This one’s definitely more streamlined, which fits well with the overall design.  Like the other caped figures in the line so far, Batman’s is cloth.  It seems to be a slightly sturdier material than prior capes, and generally hangs a little better than the slightly more paper-like material from previous releases.  He’s still got the hole in it, to keep with the line’s overall playability set-up.  Batman’s paint work is pretty basic and straight forward, but also his strongest asset.  It’s quite eye catching, and the application is generally pretty clean, without any notable slop or bleed over. Batman’s blind packed accessories consist of a winged back pack, an oversized batarang, and what looks to be a grenade launcher of some sort.  Mine are all in a clear blue; I don’t know if they have varied potential colors like prior releases, but the all blue certainly works for me; it looks kind of like they’re hard light constructs or something.

Joker has been a consistent fixture of the Caped Crusader line so far, turning up in just about every assortment.  It makes sense, him being Joker and all.  Like Batman, he gets wacky-variant-ized here, taking the classic Joker design of earlier figures, and sort of disheveling it a bit.  He’s 3 3/4 inches tall with 17 points of articulation, and like with Batman, I had no issues with stuck joints this time around.  Joker’s sculpt is a mostly new offering, although he does make use of the head from the prior Joker.  It’s sensible from a consistency stand point, so I can’t really knock it.  This Joker sculpt takes the prior, more classic and clean Joker, and sort of makes him look like he’s been in the midst of the action, picking things up as he goes.  He’s ditched his tie, and lost one of his shoes, replacing it with a stray boot.  He’s also added a few straps of pouches, as well as adding his own utility belt.  It’s a cool, sort of wasteland-looking Joker design, and definitely a lot of fun.  His paint work mostly keeps with the classic Joker color scheme, with the added details getting their own paint work…for the most part.  One of the straps goes unpainted, but the others are good to go.  The application gets a little fuzzy on a few of the edges, but generally looks pretty solid.  Joker’s secret weapons are a boxing-glove arm attachment (which is totally getting used with my GL figure), a laughing fish, and a little wind up chattering teeth bomb.  They’re all in a clear green, which makes a nice contrast for the blue with Batman, and I love how they’re all so well tied to the character.

THE ME HALF OF THE EQUATION

Full disclosure: the two figures reviewed here were sent to me in exchange for a review courtesy of Spin Master, in order to help promote their figures in conjunction with the release of Zack Snyder’s Justice League.  Per Spin Master, The Bat-Tech collection features exciting, high-tech styles of figures to collect featuring a variety of 4-inch and 12-inch figures from the Batman universe, and they are available in stores now.

I’ve been supporting Spin Master’s DC stuff pretty much since day 1, and I have definitely been pulling for them to really succeed with this line, because everything I’ve gotten from them has been so fun.  With the Bat-Tech set-up, it really feels like they’re starting to find their footing with the brand, and are making it more their own thing.  Both of these figures are a lot of fun, and give us two pretty solid new designs for characters that we’re undoubtedly going to see crop up again and again.  The new play pattern really works, and I’m definitely going to be snagging other figures from this set as I find them.

#2719: Autobot Elita-1

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

AUTOBOT ELITA-1

TRANSFORMERS WAR FOR CYBERTRON TRILOGY (HASBRO)

“Search for Alpha Trion” introduced a radical new concept to Transformers: women!  Okay, actually, it introduced gender in general, since previously they were just robots, and technically genderless.  Then these supposed “fem-bots” came along, and everything got kinda gendered…I guess.  The episode reveals that not only are there a force of female Autobots running around on Cybertron, but also that they had their own equivalent to Optimus Prime in his female counterpart, Elita-1 (whose name even has a similar root translation of “Best First”.  Pretty clever, right?).  Though central to “Search” and a fixture throughout the franchise’s various incarnations, Elita has remained a slightly less frequent choice for toys, which is really a shame.  Like Bumblebee, she was a character given a rather sizable role in Netflix’s War For Cybertron adaptation even before getting a toy in the accompanying toyline, and also like Bumblebee, she got her first War figure courtesy of the Walmart-exclusive tie-in to the show.  I’m taking a look at that particular figure today!

THE FIGURE ITSELF

Elita-1 was released as part of the second Deluxe Class assortment of Walmart’s exclusive War For Cybertron tie-in line, alongside Bumblebee and re-decos of Wheeljack, Red Alert, and Impactor.  In her robot mode, Elita stands roughly 5 1/2 inches tall and she has 24 workable points of articulation.  While these figures are theoretically meant to be more show accurate, Elita joins Bumblebee in being, well, not.  I mean, she’s not *incredibly* far off, I suppose.  The basics are there, but as I touched on in Bumblebee’s review, it’s a case of Elita’s show model being one of the few that didn’t have a pre-existing toy CAD file to work from, meaning it’s not quite as play-tested and ready to go as some of the others.  So, she is instead built on the underlying structure of the Earthrise Arcee mold.  It’s not an awful choice, since they’re supposed to be rather similar in design, and they did just tool up the Arcee mold and everything.  She does get a fair portion of new parts to differentiate, with a new head, torso, pelvis, and shoulders.  They do quite a respectable job of changing up the look, especially the silhouette.  I quite like the new head sculpt, and I do like how the new torso actually gives Elita a slightly different body shape than Arcee.  There was some confusion regarding the shoulders for this figure; initial renders showed unique shoulders, but early production samples had Arcee’s more simplified shoulders.  In hand, however, she’s back to the unique ones.  Also the subject of some changes was Elita’s paint scheme.  The exact placement of the darker red and tan sections changed around a bit between renders and then the final product, with the final settling on full red for the lower arms and tan for the lower legs, as opposed to the reverse.  It’s a pretty nice set-up, and what’s actually painted is nice and clean.  Elita is packed with the same weapon that was included with Arcee, molded in a darker transparent blue.

Elita-1’s alt-mode is exactly the same as Arcee’s.  Now, as you may recall, I was not much of a fan of Arcee’s alt-mode.  I didn’t actually refer to it as “garbage,” but I certainly thought it.  I thought it a lot.  With that in mind, prospects weren’t high for this figure. If I’m entirely honest, it didn’t bug me quite as much as I expected it to.  I don’t really think it’s because I like it any more, but more because I just knew what I was getting this time, and didn’t really get let-down by it this time around.  The transformation scheme’s still kind of involved and not super fun, and I’m still not really convinced by the final product or its playability.  But, I suppose it could be worse.

THE ME HALF OF THE EQUATION

As I’ve been watching the admittedly less than stellar Netflix show’s two seasons, one of the few things I didn’t hate was Elita and her Cybertronian crew.  So, I was definitely looking to get her for my collection.  With Max’s help, I was able to get both Soundwave and Bumblebee from this round back before the new year, but I wasn’t able to snag and Elita quite as quickly.  I happened to mention to Max just the other week that I was still looking so if he *happened* to see her, I’d still be interested, and as luck would have it, he found her about 10 minutes later.  I’m certainly not complaining.  Elita’s got a cool design, and she makes for a decent toy.  Yes, she inherits the same issues Arcee had, but she’s also got the same strengths.  That means she’s got a kick-ass robot mode, and I’m not gonna knock that.

#2718: Brock Samson

Posted by Ethan Wilson in Reviews and tagged with , ,

BROCK SAMSON

THE VENTURE BROS (BIF BANG POW!)

Though the show is named after Hank and Dean Venture, the unquestionable break out character from [adult swim]’s The Venture Bros is undoubtedly Patrick Warburton’s Brock Samson, the Walking Swedish Murder Machine.  Brock’s the show’s send-up to the likes of Race Bannon, a body guard paid to keep our exceedingly danger-prone protagonists safe, and one of the few characters on the show to at least be moderately aware of the utter insanity of the happenings around him.  And, unsurprisingly, when it came time for toys, Brock came right along.  I’m taking a look at one of those today.

THE FIGURE ITSELF

Brock was the first figure from Bif Bang Pow!’s rather short-lived smaller-scale The Venture Bros line.  After their plan to put the whole line into production a wave at a time via pre-orders fell through, they switched gears to do things a single figure at a time, starting with Brock here.  There were actually a few different versions of Brock available, with standard black t-shirt, bloody, white t-shirt, and naked all as options.  This one would be the standard.  Brock’s about 4 1/2 inches tall and he has 10 points of articulation.  Height wise, there was some discussion that he was a bit too tall for a 1:18 line, but Brock is pretty comedically large in the cartoon, and seems about right to me.  Brock’s articulation scheme is the same as the two boys.  It’s a rather basic set-up, and perhaps a touch rudimentary, but at least it remained consistent throughout the line.  While the boys were definitely a far more early show set-up, Brock’s design is a slightly later show look, after he’s ditched the polo shirt of the first season or so, and streamlined to just the t-shirt.  It’s more classically Brock, I think, so it sticks with the overall iconography for the line.  Brock does an alright job of capturing the character’s 2D design in 3D.  The signature pieces of his look are definitely there.  The shaping on the head’s a tiny bit off, especially when viewed directly from the front, but in general it’s pretty close.  I think Dean is still the most accurate of the three I’ve got, but I’d place Brock ahead of Hank, at least.  Brock’s paint work is quite nice.  It’s sharp and clean for the most part.  The eyes are slightly off, but that’s really it; everything else looks quite good.  Brock was packed with a single knife, which he can either hold or stow in the sheath on his belt.  You can also augment him with the extra weapons that were packed with the boys, if you’re so inclined.

THE ME HALF OF THE EQUATION

“These pair make for a nice little set.  Maybe someday I’ll actually find a Brock to go with them, but until then at least I have the two of them.  Go Team Venture!”

-Me, 2017

So, hey, about that… It’s been four years, to the date even, since I closed out my pair of Hank and Dean Venture reviews with a quiet hope that I might eventually get a Brock to go with them.  And here I am, with a Brock to go with them.  That’s pretty cool, I guess.  I wound up digging him out of a rather large collection of mixed items that came into All Time a few weeks back.  There were no other Venture Bros figures, but he was there, and that’s what I was looking for.  He’s not an amazing figure or anything, but he’s on par with the other two, and I’m just happy to have finally gotten him.

#2717: Wonder Woman – Last Knight on Earth

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

WONDER WOMAN — LAST KNIGHT ON EARTH

DC MULTIVERSE (MCFARLANE TOYS)

“The world has been destroyed. The Super Heroes lost, and a new evil by the name of Omega has taken over what’s left. Now, 20 years in the future, Wonder Woman leads a faction of heroes and survivors living underground known as the New Amazons. Hiding from the world above in order to stay alive, Diana and her band of warriors must choose between retreating deeper beneath the Earth’s surface or fighting for a better tomorrow.”

Have I mentioned the Batman-centric nature of McFarlane’s DC output?  Yes.  Yes, I have.  As has everyone else.  Many times.  It’s not new or different, and at this point, none of us should be surprised by each subsequent Batman he adds.  Let’s just try to enjoy the few not-Batman figures we get mixed in, right?  After initially swearing off them, the latest assortment adds up to a Build-A-Figure, and is all based on Snyder and Capullo’s “Batman: The Last Knight on Earth.”  In the story, most of the other super heroes are dead, so there’s not a lot of room for others in the toys, but Wonder Woman serves as a notable player in the whole thing, and found herself included in the first line-up.  Dig it.  That’s gonna be the one I’m looking at.  Dig it again.

THE FIGURE ITSELF

Wonder Woman is one of the four figures in the latest Build-A-Thing assortment of DC Multiverse, all patterned on “Last Knight.”  They were officially slated for the end of March, but starting showing up in a few places towards the end of February.  Wonder Woman and Scarecrow are the two lighter packed figures in the set, which makes sense thematically, I suppose.  The figure’s quite tall, and almost 7 1/2 inches tall, and she has 38 points of articulation.  At this point, the articulation scheme for the McFarlane DC figures is pretty set, so Wonder Woman kind of follows that set-up.  She’s got a pretty solid range of motion on most of the joints, and in general I found her easier to pose than most of the other McFarlane figures I’ve grabbed.  Wonder Woman’s sculpt is another all-new piece, patterned on Greg Capullo’s illustrations of the character from the book.  McFarlane’s no doubt got some experience translating Capullo’s art into three dimensions, so it does overall work out a bit better than, say, their go at Jim Lee’s style with Superman.  That being said, it’s not quite as faithful a recreation of Capullo’s art as the DCC figures from a few years back, and is definitely a bit more in line with McFarlane’s house style.  The figure seems to be an earlier-in-the-story Wonder Woman, since she’s lacking the scarring on her face.  Oddly, she’s also sporting some stubble on the non-mohawk portions of her head, which she never really has in-story.  Another symptom of that house style peaking through.  Overall, it’s not a bad piece of work.  She hasn’t had any unnecessary extra details added, apart from the stubble, and the costume seems to match well with Capullo’s design.  The general proportions, while certainly stylized, aren’t as wonky as some of the prior figures, and the detail work is pretty solid.  The texturing on the cape in particular is quite impressive.  That said, there’s some really rough flashing on the cape for my figure, which, given the ragged nature of the design, isn’t immediately noticeable, but is still really sloppy for a professionally produced figure.  On the plus side, her paint work is all pretty clean.  The base work’s all there and rather decent for the most part.  There’s some slight mismatch between the molded fleshtone that makes up the bulk of the figure, and the tiny bit that’s painted on the skirt piece, and I also question why they’ve molded the lower knee joints in flesh color instead of the darker red of the boots.  Otherwise, it’s nice work.  Wonder Woman is packed with her sword and a stand (which she needs, because she struggles to stand on her own), as well as the arms of the Bane Build-A-Figure, which I don’t have.  It’s a shame she didn’t get the Doctor Fate helmet as well, but I guess she’s got the basics.

THE ME HALF OF THE EQUATION

I didn’t really intend to get this figure.  I mean, she’s got a decent look to her, and I was mildly intrigued, but not enough to justify the whole cost of purchase.  Max, on the other hand, was already planning to buy the other three, and decided to grab Wonder Woman to finish out the Bane figure.  He wasn’t really feeling Wonder Woman, so I ended up splitting the package with him, and took the Wonder Woman on her own.  She’s another one of those designs that’s really up McFarlane’s alley, and that results in her being another pretty strong figure.  And she’s not even a Batman.

#2716: Ultraman – The Animation

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ULTRAMAN — THE ANIMATION

S.H. FIGUARTS (BANDAI)

You know what be nice?  Not going over a year between Ultraman-related reviews.  Wouldn’t that be a novel concept?  I think it would!  I’m going to do my part, and so should you!  Now, my part is very clearly purchasing the Ultraman items and then reviewing them.  Your part is…reading the reviews?  I guess.  Seems like one of these jobs is gonna be way easier.  Not gonna say which.  But I’ll imply.  Because of the implications.  When last I spoke of Ultraman, I was focussed in on the Netflix animated adaptation of the manga, and I’m staying in that general area for today’s review.  But, while that review was of the Ultraseven stand-in, this time I’m looking at the series’ main central Ultra, Shinjiro Hayata.

THE FIGURE ITSELF

Ultraman (The Animation) was released as part of the greater S.H. Figuarts line back closer to Netflix’s launch of the animation, as a tie-in.  I know, it’s a radical concept, right?  This is the second version of Shinjiro, following the manga-based version of the character that launched the Ultras into Figuarts back in 2015.  In adapting into animation, the suit uses the B Suit version’s colors, which were tweaked a bit to more closely read as the classic Hayata suit. The figure stands just shy of 6 inches tall and he has 40 points of articulation.  Ultra’s movement is rather similar to the Ace suit, as opposed to Version 7, where the hips and legs have good range, but the shoulders are a little more restricted.  It’s slightly different, since it’s not sculpt getting in the way so much on the shoulders, but more the joints just being tighter.  So, it’s possible to get more movement out of them, but it just takes a bit more doing.  I suppose that’s a little better for long-term posing, but it does at times make me worry I might break the joints.  The figure’s sculpt is up to the usual standards for Figuarts, so it’s sharp and pretty precise.  Compared to the pointy-ness of 7 and the boxy nature of Ace, this one’s a fairly good middle ground.  He’s fairly compact and streamlined. It has a lot of similarities to the 2015 figure, obviously, but it looks like parts sharing between the two is minimal.  This one adjusts things to slightly more streamline the silhouette.  It makes him look quite sleek, and I really like how clean he looks, especially when you get him into the right poses.  It also better captures the slightly adjusted design of the later suit, better emulating the classic Ultraman design.  The paint work on this guy is, like the sculpt, clean and sharp.  The color scheme is the later design’s colors, which, while perhaps not as unique, I find to be a bit more eye-catching.  The larger sections of the same color just seem to read better for the character.  In terms of accessories, Shinjiro includes three pairs of hands (fists, relaxed, and open gesture), two Specium Slash pieces, a Specium Ray effect, standard arm guards, arm guards with the Specium Blades deployed, and one arm guard with a spot to plug in the Specium Ray.  It pretty much covers all of the basics for the character, and they’re all pretty solid pieces.  I did have a little trouble with the arm guards popping out on my figure, but it’s not terrible.

THE ME HALF OF THE EQUATION

After getting the Version 7 figure from Super Awesome Wife for Christmas, I found myself with both Ace and 7, but no standard Ultraman, which seemed slightly incomplete.  She and I wound up with several Barnes & Noble gift cards after the holidays, and this guy was one of the figures they had in stock, so I figured it was as good a time as any to snag him.  He’s a fun figure to be sure, and I’m glad I finally rounded out the set.

#2715: Cyclops & Dark Phoenix

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CYCLOPS & DARK PHOENIX

MARVEL MINIMATES

The Giant-Size X-Men-themed boxed set which hit in Marvel Minimates’ second year was our first taste of that era of the team in Minimate form, and one we’d have to stick for a little bit.  We were notably two main members short of that team’s starting line-up, to say nothing of the various other players from that era.  Our first follow-up came not in the main line, but as one of 2005’s non-exclusive sets.  While it didn’t round out the team (it would be another 11 years before we’d get to that), it did give us a little treatment from the biggest X-Men story of that period, if not the biggest X-Men story in general, the “Dark Phoenix Saga.”  We got that story’s two major players, Jean Grey in her Dark Phoenix persona and Cyclops, both of whom I’m taking a look at today!

THE FIGURES THEMSELVES

Dark Phoenix and Cyclops were, as noted above, a con-exclusive Marvel Minimates two-pack, who officially dropped in March of 2005, and sort of toured the cons that year, rather than really being tied to one of them in particular, eventually even making their way to more regular release channels as well.  Both ‘mates here would remain exclusive to this particular pack, but this wasn’t the last time we got either of the characters.

DARK PHOENIX

Jean’s third Minimate finally put her in something with a little bit more staying power than the prior two, who were both outdated by the time they hit shelves.  And, depending how you classify things, this even kind of qualifies as a new character as well, so that’s doubly cool.  Jean was built on the C3 Minimate body, so she’s 2 1/4 inches tall and she has 14 points of articulation.  She’s still without the peg hole in the head, which wasn’t a huge shock, since she’d been rattling around for a bit before getting an actual release slot.  She gets two add-on pieces, one for her hair, and the other for her sash.  Both were new to this figure, neither would remain unique.  They’re not bad pieces.  Not a ton of detailing or anything, but they certainly look the part.  I suppose the hair’s a bit too tame by later standards for the line and the character’s original design, but it looks okay.  Her paint work is actually pretty involved, seeing as they’ve put some definite effort into recreating some of the more dynamic lighting of the comics.  As such, the red sections of her costume all have black shadowing, her face is slightly darker in the center, and her yellow parts have lines suggesting reflectiveness.  Her face is also a far more intense expression than we tended to see at this point, especially for a female figure.  The lines on the yellow have a tendency to rub off a bit over time, but otherwise the paint’s really solid.  Dark Phoenix is packed with two flame effect pieces.  They’re nice in theory, but kind of clumsy in practice, since they require taking off the hands to put on and remove, and in their most natural configuration, they block the use of the elbow joints.  It’s weird, because they’re sculpted with one side sharply lower than the other, but it’s the wrong side, so it doesn’t end up helping.

CYCLOPS

Cyclops had already gotten the basics of this design covered in the GSXM set, but that particular release was lackluster to say the least, so a second go wasn’t the worst idea.  Structurally, this guy’s the same as the prior variant, apart from subbing in the C3 feet, of course.  He uses the cowl/visor piece from the last one, which was good the first time around, and was still good here.  The only issue I ran into was something limited to my copy of the figure, who wound up with two left arms, one of which doesn’t sit quite right on either shoulder, making it susceptible to falling off frequently.  Aside from that, he’s cool.  The big change-up to this guy is the paint work.  The basics remain the same, but he gains extra shading on the torso piece, simulating how he looked in the comics, and also gets a much more detailed face under the mask.  It’s a very definite improvement.

THE ME HALF OF THE EQUATION

I snagged this set relatively shortly after its release.  It was probably a year or so after.  Cosmic Comix happened to get one in, and I was happy to pick it up.  This set did a lot to move Minimates forward in terms of how detailing was handled, with its actual attention to things like comics-inspired shading, and marks an interesting turn for the line.  It’s a good way of handling the extra detailing, really, and I think this was the real sweet spot for where the level of detail should have more or less stuck.

#2714: Green Lantern

Posted by Ethan Wilson in Reviews and tagged with , , , ,

GREEN LANTERN

FIRST APPEARANCE (DC DIRECT)

“Alan Scott, the original Green Lantern, first shined his emerald light in 1940’s All-American Comics #16.”

1940 proved to be a rather jam-packed year for super hero comics.  After the immense success of Superman and Batman in the two years prior, DC (then National Comics Publications) launched more of their own additions to the genre, but were also joined by a good number of competitors.  One who was perhaps less competitor than the others was All-American Publications, whose characters had frequent crossovers with National’s, and who were themselves absorbed into what would become DC before the end of the Golden Age.  Among All-American’s most prominent heroes was the first Green Lantern, Alan Scott, who arrived in July of 1940 in the 16th issue of All-American’s self-titled periodical.

THE FIGURE ITSELF

Green Lantern was released in the second series of DC Direct’s First Appearance line, which hit not too long after the first.  Like Jay, prior to the release of this figure, Alan’s only prior figure was the slightly less artist-specific one from the JSA line.  The figure stands 6 1/4 inches tall and he has 11 points of articulation.  After the stripped down articulation approach they gave to the non-Batman figures in Series 1, DCD was nice enough to change things up ever so slightly for the second round, and actually gave Alan here swivels for his wrists, which is certainly nice to have for a character like GL.  His posing is still somewhat limited, of course, but you can get a respectable range out of him.  The figure’s sculpt is based on Marty Nodell’s interior illustrations for the character.  Nodell’s work was somewhat fluid in it’s exact depiction of the character, so this sculpt tries to get the key most elements of his illustrations, worked into a cleaner overall design.  It’s quite a nice looking sculpt, and probably one of the best to come out of this line-up (really, only Hawkman rivals it).  These figures were mostly pretty light on detailing, but in keeping with Nodell’s tendency to put a lot of smaller detailing into his art, there’s actually quite a bit going on in this figure’s sculpt as well. The pants in particular have some really nice work on the folds and creases, and the billowy shirt even manages to look pretty decent.  The head’s also got a little more character to it than most of the other sculpts in the line, with more detailing in the face and hair, and even the actual band that held his mask in place (consistent in the earliest depictions of the character).  In an effort to keep with the cloth goods set-up for the line, Alan’s cape is a cloth piece.  It’s not one of the line’s finest elements, being rather bulky and a little cumbersome.  It’s got a wire to aid in posing, which is cool, but it has some trouble staying in place, and the yellow band across the front that’s supposed to be the chain is really goofy looking.  Like most of the other figures in the set, Alan’s paint work is bright, clean, and colorful.  There’s some very sharp work on the logo, as well as on the face, especially the eyes.  Alan is packed with the usual stand and reprint of his first appearance, but also gets his actual Lantern power batter as well, which is quite a nice piece.

THE ME HALF OF THE EQUATION

I’ve always had a somewhat sentimental attachment to Alan Scott, largely due to dressing up as him for Halloween when I was 7, but this was the first Alan Scott figure I actually owned.  I got it from my parents for Christmas the year it was released, and even happened to have it with me when I met Marty Nodell at Baltimore Comic Con the following year, although I didn’t have the forethought to actually get him to sign it, which probably would have been a good idea.  He’s a really cool figure, and probably the best of the First Appearance figures.  I don’t like the cape a ton, but that’s ultimately pretty minor.

#2713: Spartan Mark V [B] – White

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SPARTAN MARK V [B] — WHITE

HALO: THE SPARTAN COLLECTION (JAZWARES)

Oh man, a Halo review?  What is it, 2015?  Or, I guess 2016?  It’s gotta be one of those two, because that’s where they all fell.  What’s that?  Something new?  From Halo?  Are you sure?  Can that be right?  I guess it is.  Yes, it would seem that Microsoft is set on at least *trying* to get people to care about Halo again, and part of that drive is new toys.  Previously, both McFarlane and Mattel had thrown their hats in the ring on that front, but this time around, Jazwares is taking advantage of their general upward trend to put out their own offerings.  As with Fortnite, they’ve got two scales at play, both dedicated to the franchise as a whole.  I’m looking at an offering from the larger scale line today, with a look at the Spartan Mark V [B].

THE FIGURE ITSELF

The Spartan Mark V [B] is part of the first assortment of Jazwares’ Halo: The Spartan Collection.  As a Halo: Reach design, he fits with line’s overall emphasis on Reach-related product, hitting right alongside the Kat figure in the same assortment.  He’s just meant to be a generic Spartan, of course, as opposed to one of the named characters from the main game content.  I suppose, technically, you could consider him to be Noble-6, but, of course, he doesn’t fit the “default” Noble-6 configuration that we usually see.  The figure stands 7 inches tall and he has 34 points of articulation.  His sizing makes him technically just a little too small to fit in with 6 inch lines like Legends or Classified, but given the variable sizing on the Spartans, especially the Spartan-IIIs, you can easily fudge it a bit.  I personally don’t find them to be too out of place.  B’s articulation scheme is a pretty impressive set up, with a solid range of motion, and is certainly an improvement over McFarlane and Mattel’s offerings.  Notably, he can actually hold his rifle two handed, and also manages to get a reasonable range on both the hip and knee joints.  In general, the joints a quite nicely implemented, and he’s a lot of fun to mess around with.  I have heard that the tolerancing on the joints can vary a bit from figure to figure, but on mine, they’re really in that “just right” territory.  The sculpt itself is pretty solid for the most part.  It’s not quite on the same level as, say, a Hasbro sculpt, so there are definitely some parts that are a little more basic or rudimentary.  In particular, the upper legs do seem a little more tube-shaped than they should be.  Additionally, the armor is definitely much cleaner than Spartan armor tends to be in the games, which brings him a little more in line with Jazwares’ usual offerings.  The actual armor details are still nice and sharp, though, which is certainly a plus.  There’s also a rather clever piece of design innovation worked into the legs.  Att first glance, there’s no where to place the side-arms on the figure’s legs, which is a bit of a bummer.  But, you can pop out part of the thigh panel on each leg and flip it around, there’s a peg on the underside.  It’s quite sleek, and stays in place well, creating a rather ingenious way of simulating the games’ holster-less storage.The color scheme on this guy is the most notable bit on this particular figure, since differently colored Spartans are kind of a thing for the franchise.  This one is white, which is a fairly nice first color scheme, I suppose.  It’s pretty neutral, but distinctly different from the named characters.  The paint work is largely pretty basic, but there’s some nice accenting for wear on the lower arms and legs.  The coolest part by far, however, is the visor, which is a separate, vac-metalized piece.  It looks really slick.  The B’s accessory selection is pretty strong, with seven different hands (in pairs of gripping, firsts, and relaxed, as well as a flat left hand), plus a VK78 Commando Rifle (which is, rather oddly, an Infinite design, not Reach), and a plasma pistol.

THE ME HALF OF THE EQUATION

I’ve fallen out of Halo in the last few years, so I haven’t really been keeping up with the toys.  It’s not like there was much to keep up with, of course.  Jazwares really impressed me with their Fortnite stuff, so when they were announced to have the Halo license, I was certainly intrigued.  I was admittedly a little sad that that there weren’t any ODSTs in the first round, because they’re my favorites, but I like the Mark V pretty well too, so when I saw him in person, I figured he was a good figure to try out the line with.  I’m really impressed by this first figure, and I’m definitely going to be paying attention to upcoming releases.