Flashback Friday Figure Addendum #0032: Silver Surfer

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , ,

SILVER SURFER

FANTASTIC FOUR THE SILVER SURFER (TOY BIZ)

People are fallible. Even the best of us can let you down sometimes. Dear reader, please remember this and be kind as we delve into today’s Flashback Friday Figure Addendum, my oldest Silver Surfer review.

Time for another Fantastic Four review it seems.  Today we’re looking at a sometimes foe, but usually friend of the team, Silver Surfer.

THE FIGURE ITSELF

The figure in question is the first herald of Galactus, Norin Radd, aka the Silver Surfer.  Good old Nor here has 11 points of articulation and stands 5 inches tall.  At one point in time, he was a bit shinier, but my figure has long since dulled.  The figure’s sculpt is solid.  I think it would be difficult to mess up a bald, naked guy, but I’d probably be wrong.  He’s got a nice assortment of articulation, though I’m not really sure what’s going on with his right arm.  Is he supposed to be doing something specific ?  Because all I see is some kind of record scratching move.  Maybe this is actually a figure of often forgotten 90s sensation DJ Sizzle Surfer-izzle and I just wasn’t aware…

THE ME HALF OF THE EQUATION

I was a moderate silver surfer fan as a kid, but I actually rarely used this figure as the Surfer.  He was a nice, generic figure, good for a million things.  His joints are practically worn out from all the play time this guy got!

So, the failing starts right at the beginning, and just goes all the way through, where I just totally and completely LIE about this figure. Because the figure covered both here and in the original review? He’s *not* the one from the Fantastic Four line, nor was he ever any shinier than he is now. No, in fact, he’s actually one of two figures released in 1996, accompanied by a CD-ROM featuring digitized versions of key comic book issues, in the case of this figure, Silver Surfer related ones. I recall that being the one I had, but I guess in my mind he was the same basic figure. He was notably duller than the original release. My initial review, aside from the lying, covered the basics of the figure okay. He was missing his surfboard at the time, but I’ve since scared that one up, so huzzah, he actually gets to be a Surfer again. It’s an okay piece, and matches his finish. The connection is sort of odd, kind of like a slipper that goes over his foot, but it keeps him in place okay. There’s also a loop that attaches to the bottom, so you can put it on your finger? I guess that’s better than just holding the actual board with your hands. What is it, a toy for babies?

#3873: Princess Leia in Ceremonial Dress

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

PRINCESS LEIA in CEREMONIAL DRESS

STAR WARS: POWER OF THE FORCE II (HASBRO)

“A strong-willed warrior who fought for the Rebel cause with great courage, Princess Leia Organa was a natural born leader of the Rebel Alliance. The princess always carried herself with a regal air, whether she was taking part in the fiercest of battles or participating in state ceremonies of the highest level. Although she was adopted at a young age into the Royal House of Alderaan, Leia was in fact a true princess, as her birth mother was Queen Amidala of Naboo. I her day, Amidala also proved to be an adventurous spirit an d a great heroine to her people when her planet faced its greatest threat.”

After the main characters spend pretty much the whole movie running around in the same basic outfits, at the end of A New Hope, the Rebel’s host a ceremony to give medals to Han and Luke, which serves as a good opportunity for new, cleaned up looks for everybody (well, not Han, I guess, though his shirt is *slightly* different).  The vintage line didn’t tackle any of those looks, but Power of the Force sure did, making sure to give coverage to both Luke and Leia’s unique designs.  Let’s look at Leia today!

THE FIGURE ITSELF

Princess Leia in Ceremonial Dress was released in the 1998 “Flashback Photo” assortment of Power of the Force.  As I’ve noted before, these figures were released in the lead-up to the proper Episode I tie-in merchandise, and are also the first Star Wars figures to officially be released under the Hasbro banner.  This was Leia’s fourth standard release figure from 1998 alone, making her the most covered main character that year.  Good for her.  That’s a refreshing turn of events.  The figure stands just under 3 3/4 inches tall and she has 6 points of articulation…in technicality.  In practice, the shoulders and waist are alright, but the neck is very restricted, and the hips might as well not be there, thanks to that very thick skirt piece.  Also, because of the skirt and the relative lack of movement it allows on the hips, she has a lot of trouble standing, which is why you’ll see mine making use of a Protech stand in most of the photos.  Her color work is generally pretty solid.  There’s a bit of makeup and color on the face, which feels right for the scene they’re referencing, and the application is all rather clean.  In order to capture the sheer material of her outer robe, it’s molded in a slightly transparent plastic, and that’s a neat touch.  Leia is packed with one of the medals she bestows on the two heroes.  This one is presumably for Han, since Luke already had one packed in with his figure.  There’s also the flashback photo, which shows a picture of Leia from the scene, and then transitions to an image of Padme from Episode I.

THE ME HALF OF THE EQUATION

I vividly remember seeing every single one of these Flashback Photo figures when they were new.  Or nearly new, at least.  They clung to shelves following the hype of the actual Episode I product, and I was always a little put off by them as a kid.  As an adult, though, they’re neat, at least as figures.  Weird tie-in, though.  This Leia is neat enough, though ultimately felt a bit pointless, since this exact same look was done in The Princess Leia Collection the prior year, and I think ultimately a bit.  I suppose this one’s a closer match to the rest of the line stylistically.  She’s not much of a fun toy, but she looks alright, I guess.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3872: Sgt. Stone

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SGT. STONE

G.I. JOE: RISE OF COBRA (HASBRO)

“Sgt. Stone is a special operations instructor who trains the G.I. Joe team in combat tactics, marksmanship, survival techniques and other commando skills. He battles Neo-Viper forces who drill their way into the G.I. Joe Pit headquarters.”

I haven’t personally reviewed a Rise of Cobra figure here on the site since 2017, which is quite a while.  Admittedly, while I had a bunch of the figures when they were new, it’s not a line that I really hung onto, even though I personally like the movie more than a lot of people.  The movie was directed by Stephen Sommers, who also directed The Mummy and The Mummy Returns, and he tried to inject a bit of that flair for the adventure in to Rise of Cobra, meaning it’s, if nothing else, a fun movie.  Sommers brought with him a few of the actors he’d worked with on The Mummy, including Rick O’Connell himself, Brendan Fraser, as the one-scene wonder Sgt. Stone.  One scene was all it took for him to make it to action figure form though, so here we go!

THE FIGURE ITSELF

Sgt. Stone was released as part of the G.I. Joe: Rise of Cobra tie-in figures in 2009.  The line used a weird and sort of complicated interplay of “collections” and “waves”, and Stone was part of Collection 2 Wave 2…which really just means he was part of the larger push of product made up of the first two waves of both collections that all hit shortly before the film’s release in 2009.  The figure stands 4 inches tall and he has 22 points of articulation.  He shared his torso and legs with the movie version of Zartan, fitting, since Zartan was in Joe fatigues for his figure.  Stone’s construction is the standard 25th style assembly.  It’s generally not a bad set-up, although that mid-torso joint always has a tendency to be a bit finicky.  Stone’s uniquely sculpted pieces include his head, arms, and the armored vest for his torso.  The head doesn’t have a Fraser likeness to speak of; the eyes are too small and too high up, and the mouth sits too low.  He’s very generic.  So, in that regard, I guess he’s not incredibly *unlike* Fraser either.  Just sort of there.  His color work matches the film’s general aesthetic, which was a lot more black, blue, and grey.  There’s a bit of bleedover from the hair on my figure’s left ear, but it’s otherwise decent application.  Stone is packed with a pistol, machine gun, knife, large missile launcher and corresponding missile, and a display stand.  My figure is missing the knife, but honestly I can’t say I miss it.  Beyond that, he gets some decent basic level stuff, and then there’s always that missile launcher, since Hasbro sure did love those.

THE ME HALF OF THE EQUATION

Despite having quite a few figures from this line when it dropped, and also really liking Brendan Fraser’s brief cameo, for whatever reason, I just never got around to picking one of these up when they were new.  I ultimately regretted that.  While he’s not *rare*, he also doesn’t show up with any crazy frequency.  Thankfully, I was able to snag a loose one from a collection that came through All Time.  He doesn’t really look like Fraser, but he’s still a very nice figure, and I do like having him.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3871: Hourman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HOURMAN

AMAZING ANDROIDS (DC DIRECT)

“Created in the 843rd century, Hourman is a two-year-old android with incredible time-manipulation abilities. Encoded with the enhanced genetic code of Rex “Tick Tock” Tyler, the original Hourman, this new hero has power in abundance but is just starting to learn about human nature.”

While some of DC’s Golden Age heroes got revamped for the Silver Age, there were a good number of notable ones that did not. Rex Tyler, the original Hourman, remained the only one with that title until his son Rick was introduced in the ’80s. A third Hourman, an android from the future who frequently went by just “Tyler” was introduced in the ’90s, and is one those kind of quirky characters who’s bounced around a bit since. He did get an action figure, and was even the first Hourman in toy form, for what it’s worth.

THE FIGURE ITSELF

Hourman was part of the Amazing Androids set of figures from DC Direct, released in November of 2000.  At the time of release, he was probably the most relevant of the three figures, since he was still cropping up pretty regularly in JLA and JSA, but that’s certainly shifted in recent years.  This release remains his only action figure, and given its rough aftermarket value, I guess that makes sense.  The figure stands a little over 6 inches tall and he has 10 points of articulation.  I suppose an argument could be made for 11, since there *is* a joint on the neck, but it’s effectively rendered pointless by the hood/cape.  The sculpt was an all-new one, and honestly not a bad one.  It’s pretty basic, and captures the general design of the character, in all his rather simple glory.  The cape’s neat, because it’s got some pretty fun texturing, so it’s clearly a different material than the rest of him.  Perhaps the strangest thing about the sculpt is how his action feature works into everything.  His hourglass is designed to spin, not unlike a kitchen timer, but it also means spinning part of his pecs along with it, which is super funny looking.  It’s an odd choice, and kind of showcases DCD’s struggle earlier on to figure out what exactly they were trying to do.  So, you know, it’s gimmicky.  His paint work is on the simpler side, but does what it needs to.  It’s pretty darn thick, though, much like Amazo, and that does sort of dull the detailing on the sculpt a bit.

THE ME HALF OF THE EQUATION

When this set hit, I was all about Amazo, and didn’t really know this version of Hourman.  But, after the JSA relaunch, I found myself drawn to this version of the character, so I saved up my allowance money and bought myself one from Cosmic Comix.  I can’t really say I remember much about owning the figure after that, but I do have something of a soft spot for him, which is only helped by the fact that he’s literally the only figure of this character ever made.

 

#3870: Spider-Punk

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPIDER-PUNK

MOVIE MASTERPIECE SERIES (HOT TOYS)

There was a time when I used to reserve my Hot Toys reviews for monumental numbers in the review set-up.  But, after a while, those monumental numbers have gotten further and further apart, to the point where it really doesn’t feel like it’s worth it for anything less than 1000, and that’s actual years apart.  So, now I just mostly review them when I get a new one.  Which, admittedly, is still usually quite a gap.  My last one was way back in July of last year.  Here we are almost a year later, but, instead of adding to my Cap line-up, as is the usual reason for me buying a new Hot Toy these days, I’ve gone a bit off the reservation, and I’m looking at a Spider-Man of all things.  In my defense, it’s Spider-Punk, so, you know, there it is.  Let’s take a look!

THE FIGURE ITSELF

Spider-Punk is figure MMS726 in Hot Toys’ Movie Masterpiece Series.  He’s wedged between two other Spider-Man figures, namely Miles G. Morales (also from Across the Spider-Verse) and Black Suit Spidey from Spider-Man 3.  He’s the fifth Across figure to join the line, and he started shipping domestically towards the end of May.  The figure stands about 13 inches tall and he’s got over 30 points of articulation.

As with a great many Hot Toys figures, Spider-Punk features multiple head sculpts.  Right out of the box, he’s sporting the unmasked head, which is sensible, given how much of his screen time he spends unmasked.  Much like the What If…? figures, the Spider-Verse offerings are mimicking the animated style of the movie, and that’s most clearly seen on this head.  It keeps with the generally more simplistic animated style, and matches up pretty closely with the model from the movie.  There’s still some areas for more intricate work, namely the hair, which gets some proper texturing to help it stand out a bit better.  Punk’s eyes are moveable on this head, something that HT’s doing a bit more frequently on the non-deluxes it seems.  They’re individually moving, rather than using the “PERS” system, which means you need to take a little extra care to make sure they both line-up.  On my figure, I did notice that the tool that moves the eyes was just as likely to pop them out of the sockets as it was to remove from the back of them, so that’s definitely something to be careful about, lest your Punk lose an eye.  Punk also gets a head sporting his distinctly punk-ified version of the Spidey mask.  Though perhaps not as technically impressive as the unmasked head, it’s a very clean and well-defined piece it its own right, and quite a striking recreation of his look in the movie.  I did notice while swapping the heads that the neck joints pop out of place the wrong way sometimes, so that’s yet another thing to be careful with.

Spider-Punk’s outfit is a rather involved assembly of pieces.  The belts, boots, bracelets, and other studded bits are all sculpted, while the rest of the outfit is tailored.  I was particularly impressed with the boots, which are soft enough to allow a decent range of motion on the ankle joints, while still looking quite sharply detailed.  The pants being a slightly rubbery material makes me a little worried about their longevity, but as long as the posing isn’t too crazy, they should be fine.  The one thing I was slightly let down by here is the buttons on the vest being purely printed elements; the Legends figure sculpted them, and as it stands they feel a little cheap and easy to miss this way.

Under the outfit, Spider-Punk gets a rather unique body, designed to replicate his tall and scrawny stature from the movie.  The posing is all pretty good; the hips are ratcheted to provide more support and his mid torso joint in particular adds a lot of character to his posing options.  There’s no real areas of restriction, either, and the body hangs pretty naturally in most poses.

Spider-Punk gets a decent, if focused selection of extras, which includes:

  • 7 hands
  • 2 alternate palms for the thwipping hands to attach weblines
  • 4 different weblines
  • His guitar with backdrop effect & pick
  • A cardboard display backdrop
  • Display stand with a posable arm

The hands come in a pair of gripping, a pair of thwipping, right open gesture, left relaxed, and a left fist.  The guitar is a central piece with a lot of cool detailing.  The strings are separate, which is neat, but also worrying when it comes to placing the neck of the instrument in his left hand.  The backdrop effect is a nifty idea, but it’s a little awkward and flimsy in practice.  The pick is bound to be this figure’s most lost accessory for sure; mine almost got lost when it stuck to the tray while I was opening him.

THE ME HALF OF THE EQUATION

I’ve been a Spider-Punk fan since his original comics appearances, and was super happy with his move to the big screen.  I’ve thus far avoided all of the HT coverage for these movies, and honestly thought it would be a Peter B that broke me.  They’ve not announced any of those, though, and they *did* announce this guy, and he’s just got too cool a visual to pass up.  I do really like him, but at the same time, there are definitely some issues I haven’t encountered with a Hot Toy in a good long while.  The assembly stuff on the heads is a little worrying, and I dislike the cut corners on the buttons.  But, generally, I do really, really like him.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

Flashback Friday Figure Addendum #0031: Lt Ripley

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , , ,

LT RIPLEY

ALIENS (KENNER)

Taking a bit of a detour from updating my Toy Biz Marvel reviews for just a moment, this week’s Flashback Friday Figure Addendum marks the site’s original change of pace, less than one week in, as I made my very first mention of my favorite movie of all time, Aliens, with a look at its main character, Ripley!

So, change of pace.  Moving away from the Batman stuff for a bit.  Today we’re looking at a figure from another Kenner line:  Aliens.  This line is nominally based on 1986’s ALIENS, though it was originally meant to be a tie-in line for Operation: Aliens, a scrapped Saturday-morning cartoon adaptation of the film.

Ellen Ripley is the sole survivor of the Nostromo, drafted by the colonial Marines to save a colony that has been attacked by a hive of creatures like the one Ripley faced before.  At least that was what she was in the movie.  I have no idea what her backstory would have been in Operation: Aliens, though if the comics included with each figure are anything to go by,  she was going to be one of the marines.

THE FIGURE ITSELF

The figure is a pretty decent representation of Ripley from the movie, though her palate’s been tweaked a bit to make her more colorful.  The figure’s also a bit soft on the details, but that makes sense given it was based on the cartoon design.  The face actually isn’t too bad of a Weaver likeness for the time.  The figure included a pretty cool flamethrower, but I’ve since lost that.

THE ME HALF OF THE EQUATION

Though the figure was released in 92, I didn’t get mine until 2003, when I saw ALIEN for the first time.  I know I had this figure and the accompanying Hicks before seeing ALIENS itself because I sat through my first viewing of the film clutching both of them very tightly.

Ah, the brevity of my old reviews.  Also, the general not-applying-to-the-format nature of my old reviews.  The intro’s the longest part, which is honestly kind of crazy.  I do very little reviewing of the figure, so let’s hit you guys with some stats.

The figure stands a little over 4 1/2 inches tall and she has 6 points of articulation.  Missing from my original review was Ripley’s accessories.  The main one is the flamethrower, which isn’t at all like the one in the movie.  It is, however, really neat.  There’s a lever on the bottom that hooks onto a spot on her leg, and turning the waist pushes out a little flame effect.  She also got a small silver rifle, which she could keep on her back.

I don’t mention in my original review that I got my first Ripley figure from my local comic shop, Cosmic Comix, so shout out to them here.  I actually picked up a second one, after starting the site, also from Cosmic, as luck would have it.  Also, fun little bit of FiQ trivia here: while the wording was removed from the final version of the review, while writing this review, I referred to Ripley as “The Figure in Question” and liked the phrase so much that I decided to use it for the site’s name.

#3869: R2-D2 with Launching Lightsaber

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

R2-D2 with LAUNCHING LIGHTSABER

STAR WARS: POWER OF THE FORCE II (HASBRO)

“Though small and unassuming, the astromech droid R2-D2 has proven to be a pivotal figure throughout the quest for freedom in the galaxy. Whether delivering Princess Leia’s message to Ben Kenobi or accompanying Luke Skywalker in his X-Wing fighter as he delivered the fatal blow to the first Death Star, Artoo’s actions have become legendary within the annals of the Rebel Alliance. But unknown to his compatriots, Artoo already had plenty of time and experience at the center of action. Many decades earlier, he served on board the ship of the young queen from the planet Naboo. Even then, he displayed an unmistakable knack for helping others out of dire circumstances.”

You know, there’s often a lot of contention about the best particular version of a particular character in figure form.  It’s especially true of Star Wars, where all the main characters have dozens of figures at the least.  So, it can be pretty hard to narrow such a thing down.  But that’s best.  What we rarely talk about is worst.  Sure, a lot of that’s subjective, but I’m going to go out on a limb and say that today, I’m taking a look at the *worst* R2-D2 action figure ever made.  Well, let’s get to it.

THE FIGURE ITSELF

R2-D2 with Launching Lightsaber was part of the 1998 “Flashback Photo” assortment of Star Wars: Power of the Force II, officially released after the Hasbro change-over in anticipation of Episode I’s release.  This was R2’s third standard release figure in Power of the Force, and his second in 1998 alone.  In contrast to the other “movie specific” R2s in the line, which were all based on the first movie, this one is specifically a Return of the Jedi R2, based on the scene where he launches Luke’s lightsaber on Jabba’s barge.  The figure stands 3 inches tall and has a whole two points of articulation, which aren’t really useful, what with the permanently extended third leg.  But I’ll get to that.  The sculpt is all new, and it’s…well, it’s something.  Since the whole point of the figure is to launch the lightsaber, the sculpt is sort of worked around the whole launching mechanism.  The third leg is permanently extended, to give him more length to fit the saber, but it has to be extra wide to fit the mechanism, and even still ends up being little longer than it needs to be too.  He’s also still a bit long, and his other legs get stretched to compensate.  It’s all sorts of wonky, and not remotely close to what R2’s supposed to look like.  He’s just…wrong.  The paint work isn’t bad, I suppose.  He’s the second instance of the flat silver on the head dome, which is more accurate, and the weathering isn’t too bad.  R2 is packed with a missile version of Luke’s saber.  Like R2, it’s been notably modified to fit the new set-up, and it’s…well it’s also weird.  It launches alright, though, so I guess there’s that.

THE ME HALF OF THE EQUATION

The thing about getting the whole run of Power of the Force is that it’s the good and the bad.  So, sure, there’s some cool ones, but then there’s this guy.  He’s not great.  The gimmick’s a soft one at best, and it’s not implemented all that well, and the end result is such a mangled take on R2 that it’s just hard to see why.  But, you know, it does at least make him unique.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3868: Donatello

Posted by Ethan Wilson in Reviews and tagged with , , , ,

DONATELLO

TEENAGE MUTANT NINJA TURTLES ULTIMATES (MANUFACTURER)

My looks into Super 7’s Ultimates banner have jumped back and forth a bit between several of their licenses, but given just how sizable their Teenage Mutant Ninja Turtles line is, it’s one I sure do circle back around to a lot.  I last left off with a Donatello variant, and now I’m circling back with another Donatello.  The distinction this time around is that it marks the line’s transition from ’80s TMNT to ’00s TMNT, because these days the 2003 series is *also* vintage, so we might as well revisit that one too, right?  Right.

THE FIGURE ITSELF

Donatello is part of Series 12 of Super 7’s Teenage Mutant Ninja Turtles Ultimates line.  This is the first of the two 2003 assortments, and features the new versions of the main four.  This is Donatello’s fourth figure in the line, and his second “standard” version.  The figure stands 5 3/4 inches tall and he has 38 points of articulation.  The 2003 figures mark a departure from the prior offerings on a number of fronts, the first of which is the articulation set-up.  These figures get an increased count of joints, as well as an increased range of motion.  Most notably, there are double joints on the elbows and knees, which fixes the range issue seen on a lot of the earlier Ultimates figures.  He also gets a better range on the neck and the waist joints, which in general just makes for a better posing experience.  In terms of styling, where the figures up to this point have largely been based directly on the original Playmates sculpts, the 2003 figures are notable based not on the toys, but on the actual cartoon directly.  It’s certainly a stylistic shift, but it works.  It’s sharp, and angular, and a good match for Donnie’s design from the show.  There are two heads present.  One with a more neutral expression and a friendly smile, and the other with more expressive eyes and his teeth showing.  Of the two, the neutral’s more my speed, but they both work well, and they’re internally consistent.  His color work is basic, largely relying on molded colors.  What paint is present is cleanly handled, and he matches up well with the muted tones of the show.  Donnie is packed with three pairs of hands (in fists, open, and gripping), his bo staff, a turtle communicator, and a pair of goggles.  That’s rather on the light side compared to prior Super 7 offerings, notably missing much in the way of goofier and more specific items.  Given what these guys cost, that’s not ideal.

THE ME HALF OF THE EQUATION

I went back and forth with this one, I really did.  I’ve enjoyed the Super 7 figures I’ve gotten for the most part, and I do like a good Donatello, but also I’m kind of stepping back on my modern figure purchasing, and these are rather pricey for what they are.  But, given how short ordered these seem to have been, I didn’t really want to miss out on the chance to get him.  In hand, I actually do really like him.  The changes they’ve made do really make for a better figure.  I do wish he was either a little cheaper or came with a bit more stuff, but I don’t feel like I *wasted* my money, which is at least a good thing.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.

#3867: Amazo

Posted by Ethan Wilson in Reviews and tagged with , , ,

AMAZO

AMAZING ANDROIDS (DC DIRECT)

“Created by the infamous Professor Ivo, Amazo was the world’s first android. His “absorption cells” give Amazo the ability to absorb the powers of any super-being he meets, something he has done time and time again in his many battles with the Justice League.”

You know, I’ve got two Super Adaptoids reviewed here on the site, but thus far only a single review dedicated to the *original* green guy that replicates the super hero team’s powers, Amazo!  Introduced in 1960 (six whole years before the Adaptoid), Amazo is a Justice League foe that resurfaces with a decent regularity, since power mimicry is usually a pretty good angle for fighting a super hero team.  It took him until 2000 to finally get any sort of action figure treatment, courtesy of DC Direct’s early look into the weirder side of DC.

THE FIGURE ITSELF

Amazo was released in November of 2000, as part of the Amazing Androids line from DC Direct.  He’s the set’s one proper antagonist.  He’s based on his original design from the comics, which had also just resurfaced pretty recently at the time of this figure’s release.  The figure stands about 7 inches tall and he has 9 points of articulation.  You’d be forgiven for expecting that to be 10, since it sure does look like he’s got a waist swivel, but he, in fact, does not.  It’s got no motion, just an awkward assembly point.  The figure’s sculpt is unique to him, and a little bit pre-posed, which was still rather a new concept for DCD at this point.  There’s enough articulation to *sort of* change him up, but not really in any meaningful way.  But, his chosen pose is at least an okay one.  The details are a little on the simpler side, but are generally sharp and pretty well defined.  He looks the part, for sure, and I quite like that scowl on his face.  His paint’s also pretty simple, but generally okay.  The skin’s a little thick, which hides the sculpt a bit, but I do rather like that inhumanly green pallor he has.  Amazo was originally packed with his replica of Wonder Woman’s lasso.  It was just a simple spool of gold string, but it could hang on the little spot on his hip if you wanted.

THE ME HALF OF THE EQUATION

I had no clue who Amazo was when this figure was first shown off, but he fascinated me, and I really wanted one.  It was probably the Green Lantern ring that really sold me, but that’s hardly the point.  My dad gave me a few appearances to read, and made sure I got the figure, which I seem to recall showed up while I was away on a trip of some sort.  He was waiting for me when I got home, alongside a bag full of promotional Mr. Mxyzptlk and Bat-Mite pins that I was still giving out to people well into my teens.  He’s not the most technically impressive figure, but he does look cool and he casts an imposing silhouette amongst the other early DCD figures.

#3866: Maestro

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MAESTRO

THE INCREDIBLE HULK (TOY BIZ)

“From the future comes the corrupted version of the Incredible Hulk, the Maestro! Turning away from good, the Maestro defeated all of the world’s heroes in his future time, and now wears their weapons and armor as trophies. Using his incredible strength to become the ruler of the war-torn society, the Maestro is evil personified and he’s not finished. The only hope for this terrible future comes as the Hulk of our time is pulled forward to face the Maestro in battle and defeat him. Warned of the arrival of the Hulk, the Maestro readies himself for the greatest clash of his life!”

Two weeks ago, prolific comics writer, novelist, and columnist Peter David passed away.  Peter was a family friend, who I had known pretty much since I was born, and a regular attendee at the sci-fi conventions my family helped run.  He’d been battling with some health issues for a few years, but his passing still seemed sudden, and it is odd to think that a man with such a distinctive voice will now be absent from so many conversations.  Peter had a hand in a lot of very popular comics over the years, and in particular did a lot of pretty noteworthy things during his time writing Hulk.  He really explored the internal struggle of Bruce Banner and his duality as the Hulk, bringing to the forefront many different versions of the title character.  Alongside the late and great George Perez, Peter created Maestro, a dark take on the Hulk from an alternate future.  He got a pretty quick turnaround on the toy front, which I’m looking at today.

THE FIGURE ITSELF

Maestro was released in 1997’s “Transformations” series of Toy Biz’s The Incredible Hulk line.  Rather appropriately, the assortment also had Smart Hulk, the version of Hulk from the present day that he faced off against in his initial story, so that worked out pretty well.  The figure stands about 6 1/2 inches tall and he has 8 points of articulation.  He’s not particularly agile, but he’s a Hulk, so they don’t tend to be.  The neck is particularly stiff, though, due to the beard and long hair.  Generally, he’s really just good for the one pose.  It is, at least, a pretty cool pose.  The sculpt is rather on par with the rest of the main Hulk line.  It’s solid, and there’s a lot of pretty nice little detailing.  The warts and such on the skin are gross, but they’re kind of supposed to be, right?  In the story, Maestro is Hulk after the rest of the Marvel Universe is dead, so to reflect this, the figure gets a Toy Biz original twist on his design: the fallen hero armor.  He’s got a bandolier sporting the helmets/heads of Juggernaut, Ultron, Iron Man, Dr. Doom, and Nova, and Dr. Strange’s cloak attached to that.  He’s also got a damaged version of Cap’s shield, with a chain connecting Mjolnir to it on his left arm, and he *should* have a gauntlet on the right arm made of Wolverine’s bones, but mine is missing that part.  It’s a really cool, really distinctive visual, that’s not based on anything from the comics, nor has it ever been adapted into the comics, but it’s still very cool.  Maestro’s paint work is pretty nice, actually.  The core body gets quite a bit of accenting and smaller detail wrk, and the fallen hero armor gets a lot of color.  The only slight oddity is the all-red eyes; he usually just had normal eyes, but they made them red.  It’s not a bad visual, but doesn’t quite represent the character’s comic look.

THE ME HALF OF THE EQUATION

I remember seeing this figure in the store when he was new, and I was always fascinated by the armor (especially since it was our only glimpse at a classic Iron Man or Ultron during the Toy Biz run), but for whatever reason, I just never got around to buying one.  It’s been on my list since I got back into the collection in college, but was always just outside my immediate “gotta buy it” price range.  In light of Peter’s passing, I decided it was time to stop putting it off and finally get one, which I did.  He’s really cool, even if he’s not strictly comic accurate.  I’m glad I finally got one.