#1061: Kobalt the Mercenary

Posted by Ethan Wilson in Reviews and tagged with , , ,

KOBALT THE MERCENARY

FLASH GORDON (PLAYMATES)

kobalt1

Flash Gordon is, in many ways, the quintessential space opera.  The characters contained therein pretty much all fit the standard archetypes for such a story. As such, when introducing new characters to the franchise, if you don’t want them to stick out like sore thumbs, they kind of need to fit an archetype too.  Today’s focus, Kobalt, is no exception to that line of thought.  He’s very much the standard villainous gun for hire, sent to chase down the heroes, much in same vein as the likes of Boba Fett and Jubal Early.  So, let’s see how his figure turned out!

THE FIGURE ITSELF

kobalt2Kobalt is yet another of the basic Flash Gordon figures from Playmates.  Also worth noting: he’s the last of the three  villains the line produced.  Yeah, for some strange reason, they didn’t go for the obvious 50/50 split.  The figure stands about 5 1/4 inches tall and has 6 points of articulation.  He’s one of the few figures in the line not to get the stupid v-hips, which is always a good thing.  Kobalt’s sculpt is decent enough, though nothing particularly amazing.  He’s about on par with Flash and Dale.  The proportions are fine, and he looks like his cartoon counterpart.  That said, the details are all on the more basic side, which makes him look a little less impressive than the likes of Ming and General Lynch.  As it stands he’s accurate to the show, but feels lacking as a figure.  Kobalt’s paintwork is fairly decent, and certainly on par with the rest of the series.  His colors match up with those from the show, and the overall application is pretty clean.  He’s still exceptionally shiny, but at this point, at least he’s consistent.  Kobalt was packed with a Transrupter (whatever that is), an Imperial TranScanner, and an AirSled in a dark red color.

THE ME HALF OF THE EQUATION

Kobalt is yet another figure from the lot of 8 I picked up at a convention last summer.  Like Lynch, he’s not really a character that jumped out at me.  As a matter of fact, I didn’t really remember this guy until I picked up the set of figures.  This figure’s alright, but not anything particularly impressive.   He’s fairly run of the mill for the line.

fgordonbaddies

#1060: General Lynch

Posted by Ethan Wilson in Reviews and tagged with , , ,

GENERAL LYNCH

FLASH GORDON (PLAYMATES)

generallynch1

Today we get to the character that is perhaps the first wholesale new character from the ‘90s Flash Gordon, General Lynch.  Lynch fulfilled the role of Ming’s main lackey, which was hardly a unique role to the series.  However, he himself didn’t have any direct counterparts in the earlier iterations.  He’s just sort of a typical big-muscled lackey, of course, so he wasn’t really breaking new ground or anything.  On to the figure!

THE FIGURE ITSELF

generallynch2General Lynch is yet another figure from the basic assortment of Playmates’ Flash Gordon line.  The figure is a little under 5 inches tall (due to his slight hunch), and he has 5 points of articulation. He’s one of the shorter figures in the set, but he’s also the widest, so…good for him?  While his articulation’s more in line with the rest of the series, his sculpt actually has a lot in common with his boss Ming.  There’s a lot more texture and detail, and everything as a whole is just a lot sharper than most of the other figures.  The details of his face and the scaly texture of his skin stand out in particular as very cool.  He still bears a resemblance to his show appearance, but also has a certain degree of added realism, which just puts him above the others.  It’s definitely one of the better sculpts the line had to offer, alongside Ming.  Perhaps the only real downside (apart from the articulation) is his tendency to topple over.  The paint on Lynch is pretty decent as well.  It’s not perfect; there are a few spots of slop and bleed over, but the colors match up with his show appearance pretty well.  The General included the usual AirSled (which is a purple very similar in hue to his boss’s sled), as well as strange, ice cream scoop-looking weapon of some sort.

THE ME HALF OF THE EQUATION

Hey, do you want to take a guess where Lynch came from?  Yep, same place as the last few figures: a lot I picked up at a convention last summer.  I can’t say he was one of the figures I was particularly looking forward to, since Lynch on the show is ultimately a bit forgettable.  That said, he’s actually one of the nicest figures in the set.  The detail on that sculpt just can’t be beat!  Now, why couldn’t they put this kind of work in on Talon and Thundarr?  It’s unjust!  Unjust, I tell you!

#1059: Princess Thundar

Posted by Ethan Wilson in Reviews and tagged with , , ,

PRINCESS THUNDAR

FLASH GORDON (PLAYMATES)

princessthundra1

Okay, remember yesterday’s discussion of the characters unique to the various incarnations of Flash Gordon.  Well, today’s focus is technically one of those, but only sort of.  See, Princess Thundarr, of the Leonids was a new addition to the cast of the ‘90s cartoon, but she’s effectively just a gender-swapped version of the original strip’s Prince Thun, leader of the Lion Men (who, it should be noted, weren’t actual lion people, unlike the Leonids).  Yes, of the eight figures released from the cartoon, a whole two of them were female.  That’s pretty good for the time!

THE FIGURE ITSELF

princessthundra2Princess Thundar (that’s how it’s spelled on the packaging, but every other reference I’ve found has the two “r”s, so I’m guessing someone goofed) was another of the basic assortment of figures from Playmates’ Flash Gordon line.  The figure stands a little under 5 inches tall (she’s the shortest figure from the line), and has 6 points of articulation, counting her tail.  Not an amazing selection, but at least she doesn’t have those v-hips!  Thundar’s sculpt is pretty decently handled.  She’s a fair translation of the show design into three dimensions, though she does seem a touch…blander?…than her show appearance.  In fact, bland is probably a apt descriptor of her in general.  From a purely technical standpoint, she’s perfectly fine, but she doesn’t really have the spark of character that Flash, Dale, and Ming all had.  Her expression is rather blank, her pose is little more than a simple standing pose (which isn’t inherently bad, but looks off compared to the others in the line), and she just feels a bit meh.  Even the paint is kind of boring.  Her colors aren’t far removed from how they looked on the show, but they do seem a little more washed out than they should be (in contrast to the overly bright Talon figure).  They’re still handled well technically, but it just feels like there could be more pop.  Princess Thundar included a weird bladed disc thing, a rebel VisiPad, and a purple AirSled.

THE ME HALF OF THE EQUATION

Thundar also came from the lot of eight I picked up last summer.  I can’t say my expectations of her were strongly one way or another.  Ultimately, she feels like something of a counter point to Talon.  Her paint work is sharp, but dull.  Her sculpt is decently detailed and all, but still…dull.  And her pose is very stiff, which seems very contrary to her nature on the show.  Of the two, she’s the superior figure, but that takes her from being bad to being just sort of “meh.”

fgordonheroes

#1058: Prince Talon

Posted by Ethan Wilson in Reviews and tagged with , , , ,

PRINCE TALON

FLASH GORDON (PLAYMATES)

princetalon1

Each new iteration of Flash Gordon brings its own unique characters to the table.  The 90s cartoon was no exception.  In some cases, characters were created wholesale, and in others, they were amalgamations or approximations of previously existing characters.  Presumably, after the unforgettable performances of Brian Blessed and Timothy Dalton as Prince Vultan and Prince Barin, respectively, in the 1980 Flash Gordon movie, the makers of the cartoon felt replacing them might be difficult, and instead gave us Prince Talon, who was one of the Hawkmen, just like Vultan, but also was far less antagonistic, and served as a foil to Flash, much like Barin (who would later appear in the cartoon, albeit in a much smaller role).  Today, I’ll be looking at Talon’s one and only action figure.

THE FIGURE ITSELF

princetalon2Talon was one of the basic assortment figures from Playmates’ Flash Gordon line.  The figure is about 5 inches tall and he has 8 points of articulation, counting his wings. After reviewing Ming, Talon feels like quite a step down in terms of movement.  The one pose you see him in for the pictures?  That’s pretty much the only pose you’ll be getting out of him.  Talon is ostensibly based on his cartoon design (well, the second one, since he had a different look in the pilot), but he doesn’t really translate as well as the others in the line did.  On the show he was very angular, classically heroic in built, and had a very rigid stance.  On the figure, he’s round, a little pudgy, and permanently in a weird sort of mid-lunging pose.  Most of the cool details from his costume are just painted on, despite many of them having dimension on the original design, and the others in the set getting all the appropriate details on their sculpts.  And for some reason, they’ve given him a pair of sunglasses.  I guess all black guys in the ‘90s had to have cool shades?  They just end up looking rather hokey, though, since their shape doesn’t fit with anything else about the design.  It feels like the sculptor just got too lazy to actually sculpt his eyes, and did this as a time saver.  The wings can be removed if you so desire (because it was easier to fit him in the package with them off).  They’re rather basic and uninspiring, and once again seem to miss the coolness of his design from the show.  The paint on Talon is also some of the worst the line had to offer.  His colors are rather drab, and don’t really match up with his show design.  The pale green has been replaced by a warm yellow, which just looks even more dorky.  His details are all kind of fuzzy around the edges, and he’s painfully shiny in hue.  He just looks rather fake and cheap.  Talon included a weird bird-shaped blade-gun thing, which has an extending feature, as well as another AirSled, this time in light blue.

THE ME HALF OF THE EQUATION

Talon is one of the last figures I got from the line.  He came from the lot of 8 I picked up at a convention last summer.  He was actually one of my main reasons for picking up the set, because Talon was one of my favorite parts of the show.  Unfortunately, the Talon figure takes a look at the bar set by yesterday’s Ming figure and just sort of face plants just in front of it.  Somehow, they managed to take the coolest of the show’s designs and turn it into the lamest of the 8 figures released.  It’s a real shame.

#1057: Ming the Merciless

Posted by Ethan Wilson in Reviews and tagged with , , ,

MING THE MERCILESS

FLASH GORDON (PLAYMATES)

ming1

If Dale Arden is the prototypical heroine/love interest, then Ming the Merciless is most definitely the prototypical arch villain.  I mean, c’mon, “Merciless” is part of his name.  Over the years, Ming has run the gamut between alien and human; he’s always just different enough to be clearly of another world, and always human enough to hit close to home with his evil ways, but the exact balance can be anywhere between those points.  In the case of the ‘90s cartoon, he was definitely in the more alien camp.

THE FIGURE ITSELF

ming2Ming was released as part of the basic assortment of Playmates’ Flash Gordon line, which is sensible seeing as he’s, you know, the primary villain (though being a major character was hardly a guarantee of a figure for this line.  Just ask poor Dr. Zarkov…).  The figure stands about 5 1/4 inches tall and he has 7 points of articulation.  Of particular note on the articulation is the presence of knee joints, something no other figure in this line possessed.  Why did Ming get the extra articulation?  Simple.  Playmates also released his throne, and he had to be able to sit on it.  So, rather than give all of the figures this quite useful articulation scheme, they just made Ming that way, which means he doesn’t quite fit with the rest of the line stylistically.  On the plus side, he has one of the nicest sculpts the line produced.  He takes the show design and tweaks it to make it just a bit more realistic, both in level of detail and in overall proportions.  It still makes him seem very different from the others, but that’s kind of okay.  The cape is a separate piece, which is alright, but it has a bit of trouble staying on, and it makes hime slightly difficult to keep balanced. The paintwork on Ming is pretty decent.  The colors are a fair bit less vibrant than the last two figures, but that’s show accurate, and it makes him seem a bit more villainous.  The details are all pretty clean and sharp.  He’s also got a nifty light-piping feature on his eyes, which gives him sort of an eery kind of a gaze.  Ming was packed with an extending staff thingy, and an Airsled, this time in purple.

THE ME HALF OF THE EQUATION

Ming was my second figure from this particular line.  He was one of the many figures I picked up from Ageless Heroes’ going out of business sale back in ’99.  Ming was then my fourth figure in the line, when I got another as a gift from someone a year or two later.  Another Ming was later acquired as part of the full set of figures I bought last summer, bringing the total Ming number up to three.  That’s a lot of Mings, but I can’t say I totally mind.  The biggest problem this figure faces is being very different from the rest of the line, but that’s less a problem with him and more a problem with the other seven figures.

#1056: Dale Arden

Posted by Ethan Wilson in Reviews and tagged with , , ,

DALE ARDEN

FLASH GORDON (PLAYMATES)

dale1

One of the standard tropes of popular media, especially action and adventure oriented media, is the need for the main hero to have a love interest of sorts. In terms of sci-fi stories, many of these characters are patterned after Flash Gordon’s gal Friday, Dale Arden. Interestingly enough, Dale has rarely been simply a damsel in distress, unlike so many of the characters who followed in her footsteps. Dale has pretty consistently been just one of the team associated with Flash. In many ways, she’s aided by the fact that she’s never really been the sole love interest for Flash, allowing her to be a more fully formed character. The ‘90s cartoon stayed pretty true to form, and, in fact, Dale is probably the best thought-out of the main three characters.

THE FIGURE ITSELF

dale2Dale was released in the basic figure assortment of Playmates’ Flash Gordon line. The figure stands a little under 5 inches tall and has 5 points of articulation. She’s based on Dale’s primary design from the ‘90s cartoon, which isn’t quite as dated as the Flash design, but it’s still got a pretty clear ‘90s bend to it. The sculpt is a pretty decent translation of the show design, though it’s not quite spot-on. Her face in particular seems a bit too wide at the bottom, and the proportions of her body as a whole are far more exaggerated than they were in the show. She’s got a slightly pre-posed nature (which doesn’t really help the slightly off proportions), which kind of makes her articulation kind of pointless. You can sort of mix up the pose, but not a whole lot. It’s worth noting that Dale is probably one of the more attractive female figures from just about any toy company in the ‘90s, which is certainly something Playmates can be proud of. Dale’s paintwork is about on par with Flash’s. The colors are bold and bright (though the green’s a touch too bright for show accuracy), and the application is pretty clean. She’s still really shiny, but it bugs me a bit less here than it did on Flash. Dale includes the same assortment of accessories as Flash: a Triblaster, Rebel Visipad, and an Airsled, this time in a nice bluish green.

THE ME HALF OF THE EQUATION

I picked up Dale during a somewhat nostalgic period of my Freshmen year of college. I had pulled out a lot of my old 5-inch figures to be put back out on display and was filling a few holes here and there. I already had Flash and Ming, but not Dale, so I got her from a seller on Amazon. She’s a pretty cool little figure. She’s got her flaws, but I like her more than the basic Flash.

#1055: Flash Gordon

Posted by Ethan Wilson in Reviews and tagged with , ,

FLASH GORDON

FLASH GORDON (PLAYMATES)

flashg1

While everyone and their mother is out there celebrating the anniversary of that Star Trek thing, I think its about high time we all looked at the really important September 2016 anniversary: Flash Gordon!  No, not the whole franchise (which, it should be noted is actually 82 this year), or even the original movie serial (which is 80), but rather the 1990s cartoon adaptation, which first aired this month 20 years ago, way back in 1996.  You don’t remember that show you say?  Okay, that’s actually fair.  It only lasted for 26 episodes, never made it to any of the major networks, and the only official home media release was a VHS containing the first five episodes of the show.  It’s not particularly widespread.  However, it did manage to get a nice little toyline in the ‘90s, courtesy of Playmates.  Over the course of the next week, I’ll be looking at those figures, starting with the titular character, Alex “Flash” Gordon.

THE ME HALF OF THE EQUATION

flashg2Flash was released as part of the aforementioned Flash Gordon line from Playmates.  As far as I know, there was just the one series (though other figures were planned and scrapped).  This figure stands about 5 inches tall and has 6 points of articulation.  He presents Flash in his main look from the show.  If you thought the ‘80s Flash might be a bit dated, hoo boy, get a load of this guy.  He is the most ‘90s of the ‘90s.  The whole show had something of a ‘90s skateboarder feel to it, but Flash in particular stands out as being the most dated.  The hair, the pants with the weird belt line, the inexplicable choice of a belly shirt.  I’m not sure what they were thinking with this, but, well, here he is.  The sculpt does, at the very least, do a pretty good job of translating the show design into three dimensions.  It’s not spot on, but the animation was a bit inconsistent, so I think this is the best they could have done.  He’s slightly pre-posed, but not too absurdly, especially given that he’s from the era of Total Justice.  The paintwork on Flash is decent enough.  The colors are nice and bright, and everything seems to be pretty clean.  He’s really, really shiny, which bugs me quite a bit, but there it is.  Flash includes a TriBlaster, Rebel VisiPad, and an Air Sled (which really is just a skateboard).

THE ME HALF OF THE EQUATION

Flash was the first figure I got from this line, way back in 1996.  I actually had not yet seen the show at the time that I got him, I just knew the character from the ‘30s serials that my dad had on Laserdisc (yes, you read that right).  That figure was lost over the years, and in the mean time, I actually saw the show these guys were based on.  At last summer’s Shore Leave, one of the dealers that I’ve bought stuff from before was selling the whole set of 8 figures for $20, which seemed like a really good deal to me.  Is this figure a great one? Nope, but he’s fun enough.  Really, I bought him because I wanted the rest of the set.  Were they worth it?  You’ll have to keep reading to find out.

#1054: FA-4

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FA-4

STAR WARS: LEGACY

fa42

So, I gave Star Trek its due, why not the other “Star” franchise?  Regular readers of the site will no doubt be aware of my less than stellar opinion of the three Star Wars prequels.  That said, regular readers will also be very likely to know that I don’t hate everything that came out of those movies.  Generally, it’s the stuff at the forefront of the screen that I don’t so much care for.  That stuff in the background?  Usually pretty cool.  Case in point: FA-4, the subject of today’s review.  Most people have no clue who this guy is.  Heck, I had no clue who this was, at least prior to purchasing this figure.  As it turns out, he’s the pilot of Count Dooku’s ship at the end of Attack of the Clones.  Far from a pivotal role, but literally everyone in Star Wars gets an action figure at some point.

THE FIGURE ITSELF

fa43FA-4 was part of the final “Droid Factory” series of the Star Wars: Legacy line.  Due to the move to The Black Series in 2013, the series was put on indefinite hold, until Amazon decided to pick it up as an exclusive item.  FA-4 was originally intended to be one of the Build-A-Droids, but was made into a single release figure instead when a few assortments were combined to form this last series.  The figure stands about 3 inches tall and he has 8 points of articulation, which is pretty good for the design.  The sculpt on this figure looks to be unique.  It’s quite nice, though it appears some liberties have been taken to make the design just a touch sturdier.  While I personally find it enhances the design, sticklers for screen accuracy might be a little letdown.  While FA-4 was a pretty basic design, the sculpt still manages to work in some cool small details, especially around there areas of the joints.  FA-4’s paintwork is quite nicely handled.  He’s molded in a basic gunmetal grey, with bronze accents, which look really sharp.  Despite his duller palette, I think he still manages to stand out.  FA-4’s only accessory is TC-70’s torso piece.  I’m not really planning on finishing him, so it doesn’t do a whole lot for me, but I can’t really think of much else FA-4 could have included.

THE ME HALF OF THE EQUATION

FA-4 was purchased for me by my Super Awesome Girlfriend, back in July.  He has the distinction of being the last figure that I purchased from All Time Toys prior to the Ellicott City Main Street flood, which has closed down them and several other businesses for at least the next few months.  With that in mind, this figure has quite a bit of weight to bear.  Fortunately, I think he delivers.  He’s a really fun, unique figure, who’s been made all the more special for me.

#1053: Juggernaut

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

JUGGERNAUT

MARVEL LEGENDS SERIES (HASBRO)

juggernauthas1

We now return you to your regularly scheduled programming…

I’m sure those of you who were anxiously awaiting the final figure from my recent X-Men Legends reviews were quite put out with yesterday’s Star Trek-themed review.  Or maybe you weren’t.  You probably weren’t.  Regardless, we’re back with the X-Men today, taking a look at the latest X-Men-themed Build-A-Figure, the unstoppable Juggernaut!

THE FIGURE ITSELF

juggernauthas2Juggernaut is, unsurprisingly, the Build-A-Figure for the Juggernaut series of Marvel Legends, which has started hitting stores in the last month or so.  This is Juggernaut’s second Legends figure, and his first since way back in Series 6 of Toy Biz’s run with the line*.  Like that figure, this guy is sporting his classic attire, which makes sense.  None of his other designs have really caught on the same way.  The figure stands about 9 1/2 inches tall and he has 28 points of articulation.  Juggernaut is one of the largest of the more recent, dwarfing everyone but the Hulkbuster B-a-F.  He’s built on a body that hasn’t seen use before, but I feel almost certain will see re-use down the line.  In many ways, the construction of this figure is quite similar to Hasbro’s Marvel Universe Juggernaut from several years ago.  That was a very good figure, and by extension, so is this guy.  The build is definitely absurdly large, but appropriately so for Juggernaut.  While most of the figure is fairly smooth and clean, the armored bits, belt, and boots all feature some pretty awesome texture juggernauthas3work, which makes him look suitably worn-in, which definitely works for the character.  The helmet and head are separate pieces, but they are glued together, and the head is just the face and jaw, so it’s not meant to be removed, which is one of two minor issues I have with the figure.  The other is the facial features on the underlying face.  They’re alright, but the eyes feel just a touch too far apart, especially compared to the size of the mouth.  It’s not immediately apparent, though, and it’s not like he’s never been drawn that way in the comics.  The paintwork on Juggernaut is pretty decent.  It’s mostly pretty basic, but mostly pretty clean.  There’s a bit of extra detailing on the armored parts, which helps to accent the sculpted texturing.  Juggernaut has no accessories, but he’s kind of an accessory himself, and he hardly feels like a rip-off, just given the sheer size of the figure.

THE ME HALF OF THE EQUATION

If you follow the site, you should have a good idea of where Juggernaut came from; he was pieced together from the parts included with all those X-Men Legends I worked so hard to find.  Despite how hard I was looking for the figures, I think Juggernaut may be the fastest I’ve completed a B-a-F (barring when I buy a complete set online).  I always wanted the Toy Biz Legends Juggernaut, so I’m quite happy to have gotten this guy.

All in all, this has been a fantastic set of Marvel Legends, probably my favorite since the Infinite Series re-launch.  Juggernaut is an awesome Build-A-Figure, and I can’t say I resent having to pick up any of the figures that made him.  In fact, several of the figures here are some of the best Hasbro’s put out.  I hope they can keep up this quality!

*Fun fact:  With the exception of the somewhat tacked-on Thomas Jane Punisher, all of the Series 6 figures (Wolverine, Phoenix, Deadpool, and Juggernaut) received updates in the Juggernaut series.

juggernauthas4

#1052: Classic Star Trek Bridge Crew

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , , ,

KIRK, SPOCK, McCOY, UHURA, SCOTTY, SULU, & CHEKOV

CLASSIC STAR TREK (PLAYMATES)

bridgecrew1

Fifty years ago today, Star Trek premiered its very first episode, “The Man Trap”.  Now, here we are, all these years later, and it’s become a whole lot more than the simple three-season, hour-long  science fiction drama that it started out as.  The franchise has, admittedly, cooled off a bit in terms of popularity, but it’s still kicking, and Paramount and CBS are doing their very best to make sure it doesn’t totally fade away.  This year saw the release of Star Trek Beyond, the franchise’s thirteenth film (which was AWESOME, by the way), which was pretty awesome, and there’s even a new TV series in development. Over the years, there have been quite a few lines of action figures based on the property.  In honor of the franchise’s anniversary, I’ll be taking a look at my real introduction to Star Trek, the Playmates versions of the original bridge crew.

THE FIGURES THEMSELVES

The seven Original Series bridge crew members were released in 1993 as part of a special Bridge Set, which served to launch Playmates’ Classic Star Trek line.  All seven figures were exclusive to this set, though many of the molds would be later used on various single-release figures from later in the line.

KIRK

bridgecrew2Kirk was one of Playmates’ favorite characters to release during their run with the line.  And who can blame them?  He’s one of the signature characters from the series.  This isn’t the first Kirk Playmates released, but he was the first of the classic Kirks, so there’s that.  The figure stands about 4 1/2  inches tall and has 12 points of articulation.  Those were both standard counts for the line, and they hold true on just about all of the figures in this set.  Like almost every figure from Playmates’ Star Trek run, Kirk suffers from the strange V-hips.  I’m not really sure what their purpose is.  I mean, sure, they give him extra movement, but it’s not really good for anything, since even a basic sitting pose is virtually impossible with these hips.  They do allow him to do a fancy jig, so I guess that’s better than nothing.  Kirk’s sculpt is about par for the line, which is to say it’s not anything amazing.  You can tell who he’s supposed to be, but nothing about him is really spot-on.  Most of the details are rather soft and bold.  “Lifelike” is not really a quality this guy possesses.  He almost feels like someone flattened him just a bit, especially on the torso, and the head seems rather large compared to the rest of the figure.  The paint on Kirk is generally pretty basic.  All the colors and such look about right, and most of the application is pretty clean, which is certainly a plus.  On the plus side, the paint on the face is remarkably sharp and well-detailed, which actually does quite a lot to save the figure.  Kirk was packed with a phaser and a communicator, which seem slightly large, but are otherwise very nicely detailed.  He also included a display base, which is patterned after one of the badges, and has the Command symbol to match Kirk.

SPOCK

bridgecrew3Spock was another of Playmates’ favorites.  As perhaps the most recognizable character from the franchise, you kind of expect him the show up a lot.  Like Kirk, this was far from the first figure he had received from Playmates, but it was his first classic figure.  Structurally he’s very similar to Kirk.  He stands a little taller, but he has the same articulation scheme, for better or for worse.  Surprisingly, there are no shared parts between Kirk and Spock.  Spock has been sculpted to be a little thinner than Kirk, which works alright.  He still looks a bit wider then he should, and I can’t say the head has a particularly good Nimoy likeness, but you can see who it’s supposed to be.  Spock’s right hand is sculpted giving the Vulcan salute, which was a nice touch that really gave Spock a nice bit of uniqueness.  Spock’s paintwork is very similar to Kirk’s, which I suppose is good.  The uniform is still very basic, and the face still very nicely detailed.  On the downside, the blue of Spock’s shirt makes the paint wear on the gold sections far more noticeable than it was on Kirk.  Spock also included a communicator and a phaser, as well as a badge-shaped display stand, this time sporting the Science symbol.

McCOY

bridgecrew6McCoy was a far less common character than the other two, but he did still get his fair share of figures.  Which is good, because this guy’s just the best.  McCoy is very similar to the other two figures in terms of structure.  His closer to Spock in terms of height, which is appropriate.  I find that he’s got one of the better sculpts in the set.  He’s still a bit too wide, but his torso feels less flat and more organic than the other two.  In addition, I think his head has one of the better likenesses in the set.  It’s still not spot on, but it’s not awful.  His noggin’s still pretty huge, McCoy’s paint is more of the same.  That’s good from at least a consistency standpoint.  McCoy included the standard phaser and communicator, as well as the display stand, once again with the Science symbol.  It would have been nice to get a tricorder for him, since he’s a doctor and all, but you’ll have to grab that piece from one of the later McCoys.

UHURA

bridgecrew7Here’s where we start to get into the figures that Playmates was a bit more lenient on, though Uhura was far from absent from the line.  Uhura’s probably the most unique figure in this set, being the only female and all.  That being said, apart from the more obvious changes in sculpting, she’s still more of the same in terms of construction.  She has the same articulation scheme and is roughly the same height as the others in this set.  The hard plastic skirt kind of limits the movement on the legs, but that’s really it, and it’s not like it was particularly useful movement anyway.  On the plus side, Uhura probably has the best sculpt in the bunch.  She’s still a little squatter than she should be, but she doesn’t feel as flat and wide as the others in this set, which is a definite point in her favor.  Uhura’s paint is pretty much the same as what we’ve seen on the others, which isn’t bad.  She included the same three extras as the others, though this time the stand had the engineering symbol.

SCOTTY

bridgecrew4I’m givin’ this review all she’s got, Captain, but I think I’m running out of intros for these guys.  Here’s Scotty.  He was the engineer, and he was very Scottish.  This was his third figure from Playmates, but, like the others, it was his first classic figure.  Scotty is noticeably stockier than the others in this set, which actually isn’t too bad, because it means his head doesn’t look quite as out of scale.  He’s also got a pretty decent likeness, so that’s a plus.  The paint is similar to the others, though the red does help him stand out a bit.  He had the same phaser, communicator, and stand (once again with the Engineering symbol).

SULU

bridgecrew8Oh my!  It’s Sulu.  After getting totally overlooked by Mego, this was Sulu’s second figure from Playmates, though it was the first one that a lot of people were able to find.  He’s very similar to the other figures.  Still no re-used parts, which is actually kind of surprising, but good for them.  Sulu gets another of the better likenesses.  It’s still far from perfect, but you can definitely see some of George Takei in there.  The paint’s more or less the same as the others, which is kind of expected six figures into this review, as is the accessory selection, which includes the same three extras as the others.

CHEKOV

bridgecrew5Like Sulu, Chekov was totally left out of Mego’s selection of figures.  What’s more, despite being one of the three original series cast members included in the Generations line, he was really hard to find, meaning this was the first chance that most people had to get a Chekov.  That’s a pretty big deal.  The figure is probably the weakest in the set, if I’m honest.  The head is absolutely huge, and the hair looks totally fake (even more fake than it should…).  He also doesn’t have the greatest likeness (and mine’s even got a chip missing from his chin).  At the very least, the paint is still pretty good, so he’s got that going for him.

THE ME HALF OF THE EQUATION

This set was a gift, I’m pretty sure from my parents, for either my birthday or Christmas.  I know my dad had one of these first, and I really liked it, so he and my mom made sure that I had one of my own.  I think I still have the actual bridge diorama they were packed in somewhere as well.  That thing got some pretty serious play time.  What I don’t have is my original Uhura figure.  She went missing not long after I got the set.  It was only in the last few years that I got a replacement, courtesy of family friend (and Star Trek author and script writer) Howie Weinstein.  There’s no denying that my love of this set is mostly based around nostalgia.  The figures are hardly on par with even the figures being released alongside them.  That said, it was the first time the whole crew had ever been available, and that’s pretty awesome in and of itself.