#0380: Shoulder Zombie

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SHOULDER ZOMBIE

WALKING DEAD MINIMATES

ShoulderZombie1

When it comes to Minimates, Marvel Minimates is consistently the flagship line. Generally, there has always been at least one other line that takes the spot of “Strong second,” however exactly what line that is has changed over the years. Upon its introduction, The Walking Dead Minimates line took this spot. The line has cooled down a bit since its launch, but it’s still going pretty strong overall. Today, I’ll be taking a look at one of the line’s Zombies, dubbed the Shoulder Zombie.

THE FIGURE ITSELF

ShoulderZombie2The Shoulder Zombie was released in the fourth series of Walking Dead Minimates. He was included both with Alice and Prison Suit Lori, depending on which set you got. Every zombie in the line is based on a specific zombie from the comics. That being said, I’m not up enough on The Walking Dead to know exactly where this one comes from. The figure is about 2 ½ inches tall and features 14 points of articulation. The figure makes use of the standard Minimate body with a unique torso in place of the regular one. The new torso has been specially sculpted to show the gruesome shoulder wound from which the figure gets its name. It’s a pretty good piece, though it’s been noticeably toned down for the figure. This is understandable, but it’s a little bit gummy when compared to the (painted) extension of the wound present on the face. The rest of the figure is handled with paint, and it’s all done really nicely. There’s no real issues with bleed over or slop, and there’s some truly impressive detail work, especially on the face. I really love how they eyes are going two different directions. The Shoulder Zombie’s lone accessory is a clear display stand.

THE ME HALF OF THE EQUATION

So, why, you might ask, do I have just the Shoulder Zombie and neither of the complimentary pack ‘mates? Here’s why: when I placed my order with Luke’s Toy Store for Series 57 of Marvel Minimates, I decided to take advantage of a rather cool thing the store offers. See, they have a pretty great selection of loose Minimates, which I’ve ordered from before. But, they also offer the chance to buy a “Mystery ‘mate”, which could conceivably be any Minimate in existence. I decided to take a chance, and this is the one I got. All said, it could have been much worse. It’s not a figure I would have tracked down on my own, but having it in hand, it’s fun enough that I don’t regret the purchase in the slightest.

Guest Review #0015: Manta Ray

Posted by Tim Marron in Guest Reviews and tagged with , ,

MANTA RAY

BEAST WARS (McDONALD’S)

MantaRay

I’m sure most people remember being a kid and asking their parents to go to McDonald’s, not for the food, but because that month there was a cool toy that came with a Happy Meal. When I was just a wee babby Tim, Beast Wars (an offshoot of the Transformers brand) was my jam, so you can imagine the incessant begging that went on when I found out it was that month’s theme. Today I’ll be looking at one of my favorite McDonald’s toys I ever had, Manta Ray. Let’s dive right in, shall we?

THE FIGURE ITSELF

First off, let me apologize for that pun, I’ve been informed that it was, in fact, terrible. Moving on, Manta Ray was released as part of McDonald’s 1996 Beast Wars promotion. She is based on, well, nothing really since she was effectively created to be a McDonald’s toy primarily. Despite her name, in Beast Mode, she is actually a mobula ray, those damn imposters. She stands about 3 inches tall fully transformed as a robot, although you can make her a little taller by leaving the beast head up. She has 6 points of articulation which is a little low for a Transformer, but it’s a McDonald’s toy, the bar can only be set so high. The sculpt is, again, what you’d expect from this kind of toy and nothing more. The legs look like legs, the arms look like arms. The head and torso are basically just blocks with some detailing, which is fine except that this is supposed to be a female character and the body does nothing to even suggest that maybe perhaps Manta Ray is not a dude. Although this may have something to do with how, in Japan, she is actually a he. Her face also looks like the front of a truck, but I guess she’s a robot so I’ll overlook that. The paint is sparse but acceptable with just a bit of bleed over on the gloves. Manta Ray comes with no accessories. It’s not a great figure by any stretch of the imagination, but you have to remember where it came from, and as a McDonald’s toy, it’s not bad at all.

 THE ME HALF OF THE EQUATION

As you’ve probably guessed, I got Manta Ray at a McDonald’s right alongside my chicken nuggets. I do recall being a little disappointed that I didn’t get the Rhinox toy, but retrospectively, I’m kind of glad I didn’t. Manta rays are clearly way cooler that rhinos. Besides, for a Beast Wars junkie kid, this figure easily met its fun quota which is all that really matters anyway.

#0379: Nebula & Sakaar Trooper

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

NEBULA & SAKAAR TROOPER

MARVEL MINIMATES

At long last, all of the Guardians of the Galaxy Minimates are here. And, as of today’s review, I’ll have reviewed all of them. I previously reviewed Yondu, one of the two characters from the movie who can only be found in this lineup. Today, I’ll be looking at the other character, Nebula, as well as her pack mate the Sakaar Trooper.

THE FIGURES THEMSELVES

Nebula and the Sakaar Trooper were released in Series 57 of Marvel Minimates. This is one of the two exclusive sets from this series, though only Nebula is actually exclusive; the Sakaar Trooper was also available with Yondu in the TRU assortment.

NEBULA

Nebula is one of the movie’s key villains, but she’s absent from most of the tie-in material. It’s a shame, because Karen Gillan’s performance was definitely top-notch. This is Nebula’s debut appearance in the Minimates line, and it only missed being her debut toy by a couple of months. Nebula is about 2 ½ inches tall and she features 14 points of articulation. Nebula is built on the standard Minimate body, and she’s also a “vanilla ‘mate” meaning she has no other add-ons. Nebula has a very streamlined look in the movie, so this was the appropriate choice on DST’s part. Since she’s just a basic Minimate, a lot of importance is placed on the paintwork. Fortunately, she features some exceptional paintwork. Everything is very even, very vibrant, and very clean. Just like with Ronan, DST has gone out of their way to place the proper etched details of her clothing from the movies. Virtually every surface of the figure features some sort of detailing, resulting in a really sharp looking ‘mate. While the face is really buried under all the additional details, it’s a very good likeness of Karen Gillan. Nebula includes a clear display stand. That’s a bit lighter than the others in this series, but Nebula didn’t have any items of note that would make for good accessories, so it’s excusable.

SAKAAR TROOPER

If you feel like you’ve read my review of this figure before, that’s because you have. Aside from some very minor differences, this is the same as the Sakaar Trooper included with Yondu. If you’d like to see my opinion of the figure, go here.

THE ME HALF OF THE EQUATION

Like the preceding Guardians ‘mates, this set was purchased from Luke’s Toy Store, along with the rest of Series 57. While this set isn’t as strong a set as yesterday’s Gamora and Nova Corps Centurion, it’s still pretty good. I feel like most of the issue is that I’ve already seen half of this set before, and it didn’t really knock my socks of then either. Still, Nebula is a truly exceptional Minimate. It’s always really nice to see the occasional ‘mate which plays up the strengths of the base body. The Sakaar Trooper isn’t my favorite, but it’s not a bad Minimate, and it does look nice to have Ronan and Nebula flanked by two of these guys.

#0378: Gamora & Nova Corps Centurion

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GAMORA & NOVA CORPS CENTURION

MARVEL MINIMATES

Two months after the release of the movie and the TRU tie-in series, the main specialty assortment of Guardians of the Galaxy Minimates has finally been released. The TRU Assortment offered four of the five guardians, but it was missing that key fifth member. Unfortunately, this also happened to be the team’s only female member, which ended up causing some upset amongst people who didn’t have a full understanding of how Minimate releases work. But, Gamora is here now, and the team is complete. She brings with her a Nova  Corps Centurion, one of the film’s key army builders. There’s been quite a wait for both of them. Were they worth it? Let’s find out!

THE FIGURES THEMSELVES

Gamora and the Nova  Corps Centurion are both a part of the 57th series of Marvel Minimates, which is based on the Guardians of the Galaxy movie released this year. This is the only set available exclusively through the specialty assortment (Nebula is also exclusive to specialty, but she’s packed with the Sakaar Trooper, who is available in both assortments).

GAMORA

Gamora is the final missing member of the titular team. She makes her second appearance in the Minimates line, following a comic inspired version in 2008. Gamora is about 2 ½ inches in height and she features 14 points of articulation. She’s based on the look that the character sports for the majority of the film, which means she made out a bit better than poor Star-Lord. The figure makes use of the standard Minimate body, with an additional piece for her hair. The piece was originally used on the Thor movie’s Lady Sif figure. It’s a good piece, with lots of nice detail work, and it’s pretty accurate to what Gamora’s hair looked like in the movie, so Diamond chose well. The rest of the figure’s details are handled via paint, and they’re handled pretty well at that. All of the base paint work is nice, clean, and evenly applied. The colors all seem like perfect matches for the movie, too, so that’s an added plus. The line work is all clean and sharp. The Zoey Saldana likeness is pretty good, though the eyes may be set just a bit too apart. Gamora includes her trademark sword and a clear display stand.

NOVA CORPS CENTURION

The Nova  Corps Centurion isn’t as important as Gamora, but the Nova Corps play a key role in the movie, so this figure is still pretty important. The  Corps Centurion stands 2 ½ inches tall and features 14 points of articulation. There are a couple of named Nova Corpsmen in the movie, but this one is just meant to be a generic  Corps Centurion, whom we see quite a few of in the movie. The figure is built on the basic body, with a separate piece for his helmet. The helmet is a new piece, and it’s a very nice one at that. The sculpt is accurate to the design in the movie, and everything looks smooth and symmetrical. The Nova  Corps Centurion’s paintwork is key to the rest of the figure’s look, and it’s handled expertly. Everything is clean and even, and the colors are nice and bold. The helmet shows a tiny bit of slop, but everything on the rest of the figure is really great! Under the mask is a complete face, ears and all. It’s appropriately generic, and it has a decent “otherworldly” look to it. The Nova  Corps Centurion includes a rather large (and rather cool) gun and a clear display stand.

THE ME HALF OF THE EQUATION

Like Star-Lord and Ronan, Gamora and the Nova  Corps Centurion were purchased from Luke’s Toy Store, along with the rest of Series 57. This set was the one I was most interested in from this series, and I’m happy to say it didn’t disappoint! Gamora nicely finishes off the Guardians, and the Nova  Corps Centurion is a really well done, really fun army builder. I foresee this set being a bit more difficult to track down, so if you’re interested in it, I’d track it down sooner rather than later.

#0377: Star-Lord & Ronan

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

STAR-LORD & RONAN

MARVEL MINIMATES

There were quite a few awesome movies released this summer. The cool thing is that, thanks to three of those movies being Marvel movies, there are Minimates from those movies! One such movie was Guardians of the Galaxy. I looked at a few of the Guardians Minimates a few months ago when the TRU series first hit stores. The specialty series was just released, and I acquired a set. Today, I’ll be looking at the film’s primary hero, Star-Lord, and its primary villain, Ronan.

THE FIGURES THEMSELVES

Star-Lord and Ronan are one of the two carry over sets from the Guardians Minimates. They saw release in both the TRU exclusive series, as well as Series 57 of the main Marvel Minimates line.

STAR-LORD

Who!?! Star-Lord, legendary outlaw of—never mind. Peter Quill, aka Star-Lord, makes his first foray into the world of Minimates with this figure. Star-Lord is about 2 ½ inches tall and he features 12 points of articulation. He’s obviously based on the film version of the character, but more specifically, he’s based on Quill’s look early in the movie, primarily the opening credits scene. It’s the look Marvel was really pushing, and it’s the look that just about every figure has, but it’s unfortunately not a look he has for very long in the movie. Star-Lord is built on the standard Minimate body, with additional sculpted pieces for his hair, coat, left wrist padding, and boots. The hair is a re-use from Tomb Raider’s Roth. I’m not sure about this piece. It seems a bit off for Star-Lord. The rest of the pieces are new to this figure. They’re all well sculpted, but there are some questionable choices. The decision to have the coat closed at the top is a strange one. In the short time he wore this coat, I don’t believe he ever had it closed like that. Perhaps it was based on some sort of early costume design or preliminary shooting. Regardless, it looks rather goofy, and makes the character look unnecessarily bulky. To DST’s credit, the work on the boots is nothing short of amazing, so they deserve props for that. The paint on Star-Lord is alright, but sort of confusing. The coat exhibits passable work, but there’s some slop here and there. The arms are nicely detailed, and while the torso under the coat is completely blank, he features a fully detailed belt that no one will ever see. The face is an okay Chris Pratt likeness, but it seems that there was a bit of a mix up with the colors, leaving his eyebrows and stubble far too bright. Star-Lord includes his helmet, his twin guns, a walkman with headphones, and a clear display stand. The helmet is okay, but the paint is sloppy and too light, and the sculpt is too…wide? It just doesn’t look right. The blasters are well sculpted, but the figure does have a little trouble holding them.

RONAN

Ronan, the first Kree ever to be seen in film! That’s gotta be an accomplishment! Like Star-Lord, this is his first Minimate, though it won’t be his last. A comic version of Ronan has already been announced for the 19th TRU Exclusive series of Marvel Minimates. But that’s in the future; let’s focus on this figure, shall we? Ronan is 2 ½ inches tall and he features 13 points of articulation. He’s built on the usual body, with additional pieces for his headpiece and skirt. Both of these pieces are new to this figure, and they look to be accurate to the movie design. They are very nicely sculpted, and incredibly detailed. The headpiece renders the body’s neck articulation motionless, but going by how Lee Pace was moving in the movie, it seems safe to say the real piece did that too. The Kree are all about evolution. Maybe Ronan just evolved beyond the need to look to the side. One of this figure’s greatest highlights is his paint work. While it would have been easy for Diamond to phone this one in and just do a straight black/dark grey, they have placed texture detailing on just about every surface of the figure. It helps keep the figure from being as drab as he might have otherwise been and really gives the figure that extra pop. Ronan includes his trusty hammer and a clear display stand. Unfortunately, it seems the head of the hammer is on upside down. I don’t know how this happened, but a quick comparison shows this is very definitely the case. While it sucks, I honestly had to have it pointed out to me by someone else, so I feel like most people really aren’t going to be bothered by it. At the very least, a corrected version should be offered with the comic Ronan, so there’s that.

THE ME HALF OF THE EQUATION

This set was purchased, along with the rest of Series 57, from my favorite Minimate retailer Luke’s Toy Store. I mostly bought the Series for the two specialty exclusive sets included. Admittedly, I’ve been putting off buying this set. I passed on it at TRU, and I only really got it from Luke’s because I was buying the series in a bundle. I think Star-Lord is the main reason for that. Sadly, he’s the weakest figure in the series. Diamond obviously put in the effort, but he just ended up turning out sorta goofy. That being said, the set is worth it for the Ronan figure. For all that went wrong on Star-Lord, Ronan gets pretty much everything right. On the plus side, Star-Lord is the low point of this series, so, it can only get better from here!

#0376: Superior Spider-Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SUPERIOR SPIDER-MAN

MARVEL LEGENDS INFINTE SERIES

Alright, well it looks like the horror stuff is taking a break for a little while. So, why not return to what I know best: Super Heroes! And if we’re going with Super Heroes, why not go with Marvel, cuz they’re kind of on top right now! And if you’re going with Marvel, why not one of their top characters of all-time, Spider-Man!

THE FIGURE ITSELF

Superior Spider-Man was released as part of the Amazing Spider-Man 2 Marvel Legends Infinite Series. For next year, Hasbro should really look into shortening the ML names a bit. They’re a bit long-winded. Anyway, Superior Spider-Man is one of the mainstay figures from this series, which means that unlike the previously reviewed Spider-Girl and Boomerang, he’s not a replacement, nor was he replaced by another figure. The figure is about 6 inches tall and he sports 32 points of articulation. As the name denotes, he’s based on the “Superior” version of Spider-Man, which was he looked like when Dr. Octopus took over his mind. Specifically, he’s based on the second Superior costume, which itself was based on Alex Ross’s proposed design for the first Spider-Man movie. As far as I can tell, Spidey’s a new sculpt. I feel like I’ve seen the body before, but I can’t quite place it. At the very least, the head and hands are new. The body sculpt is pretty good. It’s nicely proportioned and well-articulated, which is always a good combination. The head and hands are obviously a bit more character-specific, and they are both handled very nicely. The head is simple, but right on the mark, which can be tricky with some Spider-Man figures. The basic hands are just in a loose gripping pose, which isn’t too bad, I suppose. The figure’s paint isn’t really up to the sculpt. It’s not a huge surprise on a Hasbro offering, but it’s still a shame. The figure has a fair bit of slop and fuzzy lines, and even a few spots of uneven paint. The worst of it is his web pattern, which is not as straight as it should be. Still, viewed as a whole, the paint doesn’t look terrible, so it could be worse. Spidey included a spare set of hands in the trademark Spidey pose, as well as the right leg of Ultimate Green Goblin, the Build-A-Figure for this series. I don’t really want this particular BAF, but somehow I keep ending up with pieces of him…

THE ME HALF OF THE EQUATION

This particular Spider-Man was a gift from my Super Awesome Girlfriend, who just keeps up living to the name. While visiting her for the weekend, I had seen the figure and decided not to get it due to not having the money. She came up to visit me three weeks later with this figure in tow. She’s really too supportive of my insane hobby! The figure isn’t without issues, but it’s really a fun figure, and it’s one of the better Spider-Men to see release in recent years!

#0375: Frankenstein Minimates

Posted by Ethan Wilson in Reviews and tagged with , , ,

FRANKENSTEIN’S MONSTER, HENRY FRANKENSTEIN, ELIZABETH, & THE BRIDE

UNIVERSAL MONSTERS MINIMATES

It’s Halloween! Ooooooooooo!  Scary!  ….Okay, it’s out of my system.  Just like last year, I thought I’d do something festive for the holiday. And wouldn’t you know it, it’s Minimates! This actually marks one year since my very first Minimate review on this site, so that’s pretty cool! Last year, I took my first look at Diamond’s Universal Monsters Minimates with the Dracula boxed set; this year I’ll be taking a look at the line’s Frankenstein set. Incidentally, while most of the Universal Monsters Minimates were based on one movie, this one’s actually based on two, since it features characters from both Frankenstein and Bride of Frankenstein.

THE FIGURES THEMSELVES

These four were released as a set in the second series of Universal Monsters Minimates, along with the Dracula set. This is the specialty exclusive boxed set, which included Elizabeth. The other three were also available in two-packs at Toys R Us, where the Bride was packed with an exclusive angry villager.

FRANKENSTEIN’S MONSTER

Not quite the titular character, but generally the character most people think of when they hear the name. The Monster’s really the selling point of the set. The figure is about 2 ½ inches tall and he features 14 points of articulation. He’s based on the Monster’s appearance in the first film, which is a good way to go. The Monster is built on the standard Minimate body, with a non-standard head and feet, as well as sculpted add-ons for the jacket and neck. All of these pieces were new to this figure, though the neck piece and feet have seen subsequent re-use, most notably on The Munsters’ Herman. The jacket sculpt is a little soft, but not bad. The head is really well done, with superb detail work on the hair and ears. The paint on the Monster is really just limited to the areas where skin is showing, which is the hands, lower arms, neck and head. The skin tone is pretty evenly applied, and there aren’t any really issues with slop. The hairline could be a bit better, but it’s not horrible. The face is somewhat generic. It’s certainly The Monster, but it’s not a definite Karloff Monster. Still, the detail work is well applied, and he’s certainly a serviceable version of the character. The Monster included no accessories.

HENRY FRANKENSTEIN

This IS the titular character, but he tends to be somewhat forgotten. It’s of note that this is Henry Frankenstein, rather than the usual Victor Frankenstein. For whatever reason, they felt the need to change his name and shunt the “Victor” name on another character. The good doctor is 2 ½ inches in height and features 14 points of articulation, though the leg articulation is a bit hampered by the bottom of his coat. The doctor is based on his laboratory appearance, complete with the proper lab coat of the time. He’s built using the standard Minimate body, with a hair piece and piece representing the bottom of his coat. The coat is new, while the hair is a re-use from the CA:TTA “Reborn” Cap (to be fair, the piece was first shown on Henry, but there was a bit of a delay between Henry’s prototype being shown and his actual release.) Both of these pieces are pretty good, and they do a decent job translating the source material. Henry’s paint is pretty decent. Everything is cleanly applied, and the detail lines all seem pretty sharp. The face seems a little off to be honest. It has a decent enough resemblance to Colin Clive, who played Henry in the film, but it seems a bit enlarged, and the eyes seem a bit oddly spaced. Henry includes no accessories.

ELIZABETH

The set’s exclusive figure is Elizabeth, the fiancé of Dr. Henry Frankenstein.  That’s kinda it. She’s not the most exciting character, but she’s sort of important, so here she is. She’s 2 ½ inches tall and she features 14 points of articulation, though most of the leg articulation has been restricted by her dress. Elizabeth is based on the usual Minimate body, with add-ons for her hair and the lower half of her dress. Both of these pieces are new to this figure, and they’re both very nicely done. The hair in particular is very nicely detailed and accurate to the source material. Paint is really where this figure excels. While she may look bland at first glance, her paint is incredibly detailed, especially on the upper part of her dress, which features some really great texture work. Like the others in the set, Elizabeth includes no accessories.

THE BRIDE

The Bride is probably the set’s second most memorable character, which is cool. The figure is about 2 ½ inches tall and features 14 points of articulation, though the legs and waist articulation are mostly rendered motionless by her dress. She’s based on the Bride’s look following her “unveiling,” which is easily her most essential look. Like all the others in the set, the Bride is built on the standard Minimate body, with additions for her hair and dress. These are both brand new to this figure, and overall they’re pretty good. The hair is pretty much spot on to the look from the film, and it’s well textured. The dress (well, sheet…) is okay, but not perfect. It’s a little bit bulky, which doesn’t quite suit the Bride’s svelte build. That being said, it’s well sculpted and it looks pretty decent overall. The paint on the Bride is respectable. The likeness of actress Elsa Lanchester is pretty much spot on, and the wraps on her arms look really great too. I wish they continued all the way around, but I suppose that’s just a limitation of the paint apps. In a predictable move, the Bride has no accessories. An extra wrapped head would have been nice, but it’s okay.

THE ME HALF OF THE EQUATION

The Frankenstein set is actually one of my earliest Luke’s Toy Store purchases. I had gotten away from Minimates for a little while, and I had had a rough couple of weeks. I had been meaning to give Luke’s a try, so I ordered myself a care package of sorts. This was probably one of my favorites of the selection I got, and I think it’s a great set overall. While I felt some of the Dracula Minimates were a little lackluster, I don’t feel the Frankenstein set has any real short comings.

#0374: Flying Alien Queen

Posted by Ethan Wilson in Reviews and tagged with , , ,

FLYING ALIEN QUEEN

ALIENS (KENNER)

Okay, just one more Kenner Aliens review (well, I still have Bishop and the original Hicks, but they’re a ways off). Yesterday, I looked at Kenner’s first stab at the Alien Queen. That figure was actually pretty faithful to the source material, and the few changes they made actually made it a better toy. Today, I’ll be looking at another version of the Queen, this time with a few more liberties taken. So, do they make for a good toy?

THE FIGURE ITSELF

The Flying Alien Queen was released in the second series of Kenner’s Aliens line. Like the first Queen, she was a later addition to the assortment. This was Kenner’s second figure of the Alien Queen, and it’s a lot more out there than the first. The figure is about 6 inches tall and it features 7 points of articulation. As you can probably guess from the name, this figure’s shtick is that it’s aerial-based. One has to wonder what differences would have to be present in the host for this to come about. Did the Flying Queen hatch from a really large bird? Maybe an angel or something? I don’t know. What’s most interesting about this figure’s sculpt is the complete lack of overlap with the normal Queen. You’d think something like “flying Queen” would just be an excuse to re-use a bunch of parts from the original, but nope, Kenner went all new. For the Flying Queen, it seems Kenner has thrown out the movie Queen design entirely, and instead gone for something all their own. It’s almost as if the sculptor of the Flying Queen was given one of their other aliens as a reference and told “Make a queen.” So, this figure is much more basic alien inspired. The head has the regular Alien shape, and the tail is a bit shorter in length. It’s not bad, but it’s not quite as impressive as the first Queen. A lot of the details aren’t quite as sharp, and the proportions seem a bit sillier. The wings are decently done, but they honestly seem out of place with the rest of the Alien aesthetic. They feel like they’re from another toyline all-together. The paint on the Flying Queen is certainly unique. The figure is cast in a transparent greyish-purple plastic, with some silver airbrushing to bring out some of the details, and a little bit of red thrown in just for fun. The transparent look is actually pretty fun, but you have to wonder why the flying Queen would be transparent purple, while the regular Queen is an opaque black. Best not to think about it, I suppose. The Flying Queen included no accessories, but he does have a wing-flapping action feature, activated by pushing a button on her back. The claw on her left foot is also on a spring, but there doesn’t seem to be a clear way to activate it. It just goes off sporadically.

THE ME HALF OF THE EQUATION

The Flying Alien Queen is the last piece of the lot of Kenner Aliens figures I won on ebay. Of all the figures in the lot, this is probably the one I was least interested in. My opinion of it hasn’t really changed much, to be honest, but my lackluster feelings towards the Hicks Vs. King Alien set does mean that this one moved up a peg by comparison. It’s not a bad figure, but it’s not one of my favorites. It’s a better figure than something like the King Alien or the Alien Arachnid, but those felt like part of the line, while this one seems sort of out of place. This figure seems to mark when the line really started to move away from the movies, which is where I really start to lose interest. And with that, I am done with my Kenner Aliens stuff for a while. The timing actually worked out quite nicely, as they served as a nice little lead-up to Halloween!

#0373: Alien Queen

Posted by Ethan Wilson in Reviews and tagged with , , ,

ALIEN QUEEN

ALIENS (KENNER)

In the movie Aliens, the titular creatures all received a slight re-design from director James Cameron and legendary creature effects wizard Stan Winston. It was the first in a long line of tweaks to the Xenomorph design, and it happens to be my personal favorite, mostly due to the fact that it’s the one used in the Greatest Movie of All TimeTM. In addition to creating a new looks for the “drones,” they also introduced a whole new creature design, the Alien Queen! The Alien Queen takes the role of primary antagonist for the film’s final act, and has become one of the most memorable creature designs of all time, right up there with the original Alien. It’s no surprise that Kenner released an Alien Queen in their Aliens line from the early 90s, but what is a bit of a surprise is how close to the original design they stayed.

THE FIGURE ITSELF

The Alien Queen was released in the first series of Kenner Aliens figures. She was actually a slightly later release than the rest of the figures, mostly owing to her larger stature. The figure is about 6 inches in height and she features 10 points of articulation (those extra sets of arms really pull her up here!). There were three versions of the Alien Queen released in this line; this is the first. The final version of the Queen is generally seen as a near-perfect recreation of the Queen’s design, but this one’s not too far off either. They’ve given her an extra set of arms, and the figure is a little bit stockier than the movie version. Her inner mouth is more like that of the standard Xeno as well. None of these things really hurt the figure, so it’s not too bad. The actual sculpt is really very nice. There’s tons of detail work all throughout the figure, with lots and lots of layers and texture. The figure also had a rather large tail that attached to the back of the figure. In theory, I think it’s supposed to be bendable, but I had no such luck with it. The entire figure has been painted with an iridescent black paint, which is a great match for the coloring of the Aliens. She also has proper silver detailing on both sets of teeth, all of which is applied cleanly. The Queen included one accessory: a “Deadly” Chest Hatchling. Obviously, this is meant to be a chestburster, and it’s done rather well, but why exactly is “Deadly” in quotes? Is it not really deadly? Because I feel like John Hurt would like to disagree. Anyway, in addition to that, the Queen also features two action features. The first is an “attacking double jaw” which sends the inner mouth forward. It’s activated by squeezing the back of the Queen’s head. The second is a tail whipping feature, which is activated by pressing a button on the figure’s left leg.

THE ME HALF OF THE EQUATION

The Alien Queen is another piece of the lot of Kenner Aliens figures I won on ebay. I had mostly wanted the lot for the two-packs, but I was more than happy to get this figure as well. In hand, I think this may be my favorite of the Aliens I received. It’s not a perfect recreation of the movie Queen, but this is a pretty neat amalgam of the Queen and the basic drone, almost like a junior Queen or something. I think the thing that shocks me the most is the total lack of re-releases of this particular mold. A Ripley Vs. Queen two-pack feels like it would have been a natural fit for the Aliens Vs. Marine line.

Guest Review #0014: Isa – v1

Posted by Tim Marron in Guest Reviews and tagged with , ,

ISA v.1

INFINITY BLADE COLLECTIBLES

IsaV1c

Today’s review is written by Tim Marron.  Check out more from Tim over at Tim’s Blarg and Timsical Thoughts.  Take it away Tim!

When it comes to fighting Deathless and their hordes of daeril, brute strength will only get you so far. Sometimes you need a little finesse to get the job done. Cue Siris’ sprightly feminine counterpart, Isa, to twist some necks. She also happens to be the second figure I’ll be reviewing in my growing collection of Infinity Blade figures.

THE FIGURE ITSELF

IsaV1aAlthough her debut appearance was in Infinity Blade 2, Isa was not playable as a character until the third game. Her figures are based on the many possible wardrobe options in IB3. This version, in the small size, has her equipped with the Perconis helm, Forbidden Armor, Illorium (sometimes Ellorium) sword, and Honor Guard brace striking the “Zenith” pose. Like Siris, Isa’s sculpt is basically dead on, being taken from the game’s models. Certain areas like the ribbon on her helmet and the wing/fin things on her back are quite impressive for 3D printing. In a classic sculpture move, there is a little tree stump right next to her leg and sword to add a bit of structural support without leaving the figure looking unfinished. It’s not a bad feature, in fact, as far as obligatory tree stumps go it was handled pretty well. The only thing is that, in order to have Isa’s sword touching the stump, looking carefully, it seems like they may have bend the blade ever so slightly to achieve contact. That being said, it’s a minor gripe about an overall fantastic sculpt. The color on this model is right on par with my previous Siris figure: looks great overall with one or two minor splotchy areas. In Isa’s case they are on her brace and sword, both of which are fairly small in terms of surface area so I can forgive them looking a little fuzzy. Isa comes with no accessories and has no articulation, but we knew that already, didn’t we?

IsaV1fIsaV1b IsaV1e IsaV1d

THE ME HALF OF THE EQUATION

After my purchase of my Siris v.1 figure, Sandboxr, the company that does the actual printing, was nice enough to send me an offer for $5 off my next order. Needless to say I was very quick to send in my Isa’s design for printing. Then, because this is how the world works, the day after I placed my order, I got an email notifying me that Infinity Blade prints by Sandboxr were 20% off. To make a pretty short story even shorter, expect another Siris review very soon. And then probably more of both after that. I gotta wonder though, do you think Siris works for Sandboxr? Because they did a pretty good job of having her… immortalized.