#0843: Chopper Predator

CHOPPER PREDATOR

PREDATORS (NECA)

Chopper1

Alien vs. Predator is NOT a good movie. It’s pretty terrible from start to finish. However, it’s failure as a film is more punctuated by the fact that there’s actually a lot decent ideas (or at least the beginnings of decent ideas/concepts) that are completely dropped in favor of making the film as generic and forgettable as possible. One of the most disappointing aspects of the film is it’s handling of the second titular character, the Predator, or more accurately to the film, the Predators. The movie presents us with three unique Predators. They look cool, and their super imposing, and you’re super excited to see what they can do. But, they spend the first half of the film cloaked, and when they finally engage the Aliens, two of the three are taken out in the space of 5 minutes (by the same Xeno, no less!), leaving us with only the least distinctive of the three Predators to carry the rest of the film. Fortunately, NECA’s currently in the process of making super cool toys of just about every Predator ever, so the AvP Preds have gotten new life via action figures. Today, I’ll be looking at my personal favorite of the trio, Chopper Predator.

THE FIGURE ITSELF

Chopper2Chopper Predator is part of the 14th Series of NECA’s Predators line, which is the first of a handful of series (in both the Predator and Aliens lines) based on AvP. The figure stands almost 9 inches tall and has 32 points of articulation. Chopper uses a new base body for the Predators, introduced in this series, and shared with his two series-mates. This new body is much larger than previous Predators, and also offers a much greater range of motion and posability. The body is nicely proportioned, and it has a ton of really great texturing and fine detail work. Seriously, every part of this sculpt is covered in texturing, which makes him look really cool. While a lot of the body is shared with the other two Predators, Chopper does get a unique head, forearms, and plasma caster. The head depicts Chopper’s bio mask very nicely; the texturing on it really makes it look like the real thing. The “hair” is a little bit unruly, but it’s made from Chopper3soft rubber, so it can be managed.  The forearms are the real star here, since the large blades are what he takes his name from. The gauntlets have some fantastically ornate work on them, while still being nice and sturdy, and the left one even has a flip-up display. The actual blades are well-handled, and surprisingly sharp; they’re included in both semi-stowed and fully extended lengths, which is a nice touch. One of Chopper’s more distinctive elements was the pair of skulls mounted on spikes on his back, which this figure replicates as best it can. They’re included as separate pieces; one is slotted into the base of the plasma caster, and the other is supposed to pop into the little clip on Chopper’s back. I say “supposed” because mine included the clip included on Celtic and Scar, rather than the smaller unique clip that Chopper was meant to have. Chopper4Fortunately, a carefully shaped and cut twisty tie was enough to keep it in place! The actual skulls are just as awesomely sculpted as the rest of the figure, and replicate the in-movie look very well. Chopper’s paint work is another pretty great area. There’s some nice variance in the sheens of the various parts of him, with the skin being shinier than the armor and cloth. He’s also got some fantastic accent work on the armor, which gives it a nice worn in look and adds a lot of depth to the figure. There are one or two spots of bleed over, but the overall work is good enough that they don’t jump out at you. In addition to the two Chopper5sets of blades, and the skulls on spikes, Chopper also includes a Combi Stick (in retracted form), a pretty brutal looking knife, and a shuriken looking thing (which he can’t hold, what with having two fists. It’s the thought that counts!). That’s incredibly impressive given that prior Predators were lucky to get more than one accessory!

THE ME HALF OF THE EQUATION

Despite not caring for the film, I’ve actually been anxiously awaiting this series’ release ever since they were announced. I was always bummed that Chopper was so under-utilized, and even more bummed when he was the only Predator left out of McFarlane’s tie-in line. I bought Chopper from All Time Toys, after catching their post on their FB page that this series was in stock. I’m so happy to have him, and he’s hands down my favorite Predator to date. NECA did an amazing job on this one!

NecaSnow1

 

#0753: B.A.T.

B.A.T.

G.I. JOE: A REAL AMERICAN HERO

BATVint1

After being a fairly straightforward military-based line of toys, and then a mostly down to earth adventure series for the first 20 years of its life, in the 80s, G.I. Joe gave up on that whole real world thing and threw caution to the wind. Okay, that’s not true. The first year of the 3 ¾ inch line was actually pretty modest. Then 1983 added Destro and Gung-Ho to the line and all bets were off. Prepare for the neon colors, the wacky specialists, and even the Battle Android Troopers!

THE FIGURE ITSELF

BATVint2The B.A.T. was released in the 1986 series of G.I. Joe: A Real American Hero (which, as I noted in my Lifeline review, was a pretty good year for the line). The figure is 3 ¾ inches tall and has 15 points of articulation. That’s one more point than most of the line! Structurally, the figure was all new at the time, though his pieces would get used for a few other figures (though, none of them were B.A.T.s. It depicts the B.A.T. in its Cobra uniform, but there are actually some nice hints at it being a robot under the clothes, rather than just a normal person. The details are generally pretty sharp, at least for a figure of the time, and the mechanical arms in particular are very nicely detailed. The B.A.T. definitely looks unique from the other Cobra forces, while still fitting in great stylistically. The figure originally had a lenticular piece in the middle of the torso, detailing some of the B.A.T.’s internal mechanics. Sadly, my figure does not have this piece. The paint on the B.A.T. is decent, though not the greatest thing ever. The orange/yellow bits are a bit on the sloppy side, especially around the edges. That said, the overall look is pretty good. The Bat is pretty well accessorized, with four different right hand attachments (normal hand, claw, flame thrower, and gun), as well as a backpack to hold the extra attachments. Also, my figure has a small pistol thrown in, but that isn’t from the original figure.

THE ME HALF OF THE EQUATION

I picked up the B.A.T. loose from local toy store All Time Toys this past summer. I’ve always loved the B.A.T. design, and I’ve had several of the figures over the years, but I never had the original. Now I do! He’s a pretty nifty little figure, though I do think he’s been surpassed by a few of his successors.

BATVint3

#0740: Snake Eyes – Commando

SNAKE EYES – COMMANDO

GI JOE: A REAL AMERICAN HERO

SnakeEyes90s1

When most people think of Snake Eyes from G.I. Joe, I’m pretty sure the default thing that pops into people’s heads is the whole “ninja” thing. It’s kind of become a defining trait of the character.  That’s actually pretty funny, because he wasn’t originally a ninja. His official designation was commando, and his original figure didn’t even include a sword! Over the years, Snake Eyes has gone up and down the scale of ninja-ness, as Hasbro tries to bring him back to his original roots as just a faceless commando, but it never sticks. Still, it results in some interesting figures!

THE FIGURE ITSELF

SnakeEyes90s2Snake Eyes was a part of the first series of Dollar General exclusive G.I. Joe figures. Yes, that does seem like an odd place to sell exclusive action figures. Just go with it, I guess. Also, point of reference, this is 59th version of Snake Eyes in the small scale line. That’s a whole lot of Snake Eyeseseses. The figure stands roughly 3 ¾ inches tall and has 22 points of articulation. This figure is meant to replicate the somewhat unique look of the fourth version of character, released in 1991. It was the first attempt on Hasbro’s part to take Snake Eyes back to being a commando, before they threw caution to the wind and went full on Ninja Force. This figure has been constructed entirely from re-used parts. Most of them are from the 25th Anniversary update of the third Snake Eyes figure, with a few other assorted pieces thrown in. There’s also an add-on piece for his web gear, which I believe is also a re-use, but I’m not sure from where. The end result is a figure that looks kind of like the original figure, like if you squint or something, but isn’t anywhere near as accurate as some of the other entries in the line. That said, the pieces all work pretty well together, and he still looks pretty cool, so it’s hard to really complain. The paint on this guy certainly does a lot of the heavy lifting in terms of conveying the design this is based upon. That figure was pretty distinct with this color palate, playing up the whole “American Hero” part of the title a bit more. This one does a pretty serviceable job of capturing the look. The colors have been toned down ever so slightly, but the overall look is still there. Snake Eyes was packed with a katana and a black display stand.

THE ME HALF OF THE EQUATION

I never had any luck finding this guy at Dollar General, so I kind of missed out on him for a while. I ended up finding him at nearby small toy shop All Time Toys. I never actually cared all that much for the original figure of this design, so I really don’t mind the changes Hasbro made. He’s a pretty nifty toy, and that color scheme certainly sets him apart from the other Joes!

#0636: Endoskeleton

HEAVY GUNNER ENDOSKELETON

VERSUS THE TERIMATOR (NECA)

EndoVG2

So, I’m sure you all read my review of Terminator Genisys, right?  If not, what’s wrong with you?  How can you expect to keep up with the site if you don’t read every single word I publish here?  Geez!  Anyway, if you did read it, you’ll know that I really enjoyed the movie, which almost always leads to me wanting toys.  Sadly, the Genisys figures aren’t out just yet, so I’ll have to make due with some earlier Terminator stuff, just to hold me over.  NECA’s had the license to the various Terminator films (well, the first two, at least) for the last few years, and, like many of their licences, they’ve made use of the molds a second time as video game-themed repaints.  Unlike a lot of their other video game repaints, Terminator got a whole subline of figures, shared with other 80s sci-fi hit, Robcop.  Today, I’ll be looking at one of the handful of Endoskeletons released, dubbed the Heavy Gunner Endoskeleton.  I wonder what his schtick is!

THE FIGURE ITSELF

EndoVG1The Heavy Gunner Endoskeleton was released as part of the Versus The Terminator line by NECA.  Yeah, I think it’s officially supposed to be Robocop Versus the Terminator, but the box doesn’t have the Robocop part, so…yeah.  The Heavy Gunner is one of three Endos released in this line, but he’s the only one to be released as a single figure.  He’s based on the design of the mounted gunner Endos from the game, but he can also work as a fairly standard Endo as well.   The figure is roughly 7 inches tall and has 23 points of articulation (not counting all the various pistons used to help with that movement.)  Structurally, the main figure is identical to NECA’s revamp of the Endoskeleton from their The Terminator line.  It’s easily one of the best renditions of the Endoskeleton available, so one can hardly fault NECA for using it again.  The detailing of the sculpt is phenomenal and the amount of effort put into making sure most of the pistons are actual working, moving pieces is nothing short of astonishing.  Also, while you might assume the figure is very fragile, based on the slightness of the design, he actually doesn’t feel flimsy at all.  He feels quite sturdy.  I mean, I wouldn’t suggest giving it to a little kid to play with, but it holds up to posing and such very well.  As with pretty much all of the “video game” figures that NECA’s released, paint is one of the figure’s defining traits.  While he shows a bit more pre-placed highlighting and a slightly flatter color palette, this Endo’s actually not too far off from a more basic model.  He won’t be passing for a real life robot or anything, but he’s certainly more grounded than what we’ve seen, giving a nice elegant simplicity.  The other big draw of this particular figure is his titular “heavy gun.”  He includes a minigun, which is actually just a re-use of the same piece from the Cyberdyne Assault T-800 from the T2 line, but it’s attached to a backpack style ammo case, and it includes an optional tri-footed stand to mount the gun, much in the same way it’s shown in the game.  The stand is, sadly, a necessity, as the figure cannot hold the gun without it.  However, he looks so cool all set up that I’m willing to forgive that.

THE ME HALF OF THE EQUATION

This guy is actually my first NECA Endoskeleton.  For a number of reasons, I never got either the T2 or Terminator versions of the figure at retail, and by the time I tried to fix that, they’d shot way up in price.  So, when these figures were announced I figured one of the Endos might make a decent enough stand-in.  It seems a lot of others thought that too, making this guy fairly difficult to acquire.  Fortunately, I came across one at nearby toy shop All Time Toys, which I was quite excited about.  I got this guy at the same time as the Dog Alien I reviewed not too long ago, and they made for quite an awesome pair.  Of course, now NECA’s come out with a re-release of the Terminator Endo, so this guy won’t really be a stand-in, so much as another Endo on the shelf.  But, hey, worse things have happened!

#0625: Dog Alien

DOG ALIEN

ALIEN3 THE VIDEO GAME

DogAlienVG2

If there’s a theme to any of my recent reviews, I’d say it’s “figures that are almost identical to figures I reviewed not long ago.” First Superman Red, then Ultron 2.0, and now it’s the Dog Alien. Of course, most of these figures have a pretty good reason for being so similar to each other, and as an added bonus, the reviews are also a heck of a lot easier for me to write. Yay for Ethan being selfish and lazy!

THE FIGURE ITSELF

DogAlienVG4The Dog Alien is the latest release in NECA’s subset of figures based on licensed video games. The idea behind the line is applying the more limited color palettes of vintage video games to some of NECA’s more realistic sculpts, affording them a chance to get an additional use out of some of their molds. The Dog Alien is over 9 inches tall (standing straight up) and features 39 points of articulation, plus a bendable tail. The figure is based on the appearance of the titular character in 1992’s Alien3 tie-in video game. Sculpturally, the figure is identical to the Aliens Series 3’s regular Dog Alien. Though it isn’t my favorite of the Xeno designs, there’s no denying that this is some of NECA’s finest Xeno work. Seeing as there are far less chances for re-use on the Dog Alien, I’m glad to see NECA found another use for this tremendous sculpt. Obviously, the real draw of this figure is the all-new paint scheme. The game which the figure is based on was a 2D side-scroller. Depending on which direction the alien was moving, it would be either blue or brown. The figure has replicated this idea quite expertly. When viewed from the right, the figure is blue, and when viewed from the left, he’s an orange-ish brown. The paint is handled in such a way that you can get a surprising amount of range without seeing the opposite side’s color. In addition, the paint is applied in such a way to really accent the strengths of the sculpt, and highlight many of the cool details that were easily missed on the regular version. The colors are bright and vibrant, and contrast quite nicely with the underlying black. The Dog Alien is packed with the same stand included with the standard version. I don’t find I need it, but it’s nice to have in case you want to do some more extreme posing.

THE ME HALF OF THE EQUATION

When this figure was first announced, I really wasn’t sold on it. I’m already pretty iffy on the Dog Alien in general, so I wasn’t sure I wanted to have yet another one. But, up to this point, I’ve picked up every figure from NECA’s Aliens line, and it would suck to just skip one. So, I had quite the dilemma on my hands. A few weeks ago, I stopped by local toystore All Time Toys, just to look around, and they had happened to get their shipment of these guys in. In hand, my opinion of the figure changed completely. This figure really pops. It could have been really gimmicky, but the paint here is top notch, and produces an incredibly unique figure. This has gone from an item I thought I might skip to the highlight of my collection.

DogAlienVG3

#0348: Cornelius

CORNELIUS

PLANET OF THE APES (NECA)

Well, I still haven’t gotten around to seeing Dawn of the Planet of the Apes yet, which means I still don’t know if my purchase of NECA’s Caesar figure from the movie was warranted or not. Okay, actually it’s a great figure, and even if the movie was terrible, I wouldn’t feel bad about spending the money to get it. However, that figure was more or less a trial run for what was to come. See, I haven’t seen the latest Apes movie, but I’ve seen all of the originals. And NECA, who are well on their way to being my very favorite toy company, are making a line of Classic Apes figures to compliment the new ones. The first series consists of a generic Solider Ape, the esteemed DR. Zaius, and Cornelius. I’ll be looking at that last one today. Cornelius is one half of the pair of apes that assist Taylor and Nova in the first film, as well as returning for the second film, and gaining a starring role in the third.

THE FIGURE ITSELF

Cornelius is a part of the first series of NECA’s Planet of the Apes line. The figure is about 7 inches in height and features 24 points of articulation. Cornelius only really ever had the one look in the movie, so that’s what the figure has been based on. The sculpt is completely unique to this figure, and it is just fantastic. It would have been easy for NECA to phone things in a bit on the head, and make it more generic, but they haven’t. Roddy McDowell was pretty well buried under the ape makeup in the movies, but there’s no denying that this figure is based on him as Cornelius. On top of the great likeness, they’ve also included some wonderful details in the face and hair that make the figure look incredibly lifelike (well, for a fake monkey…). The body is pretty great too. Cornelius’s garb is nicely detailed. I really like how they’ve differentiated between the different materials of his clothing. They’ve used a rubber add-on piece for his torso, so that he can have some torso articulation without ruining the flow of the sculpt. Cornelius’s paint is just as good as his sculpt. Everything is nice and clean, with no slop or bleed over. They’ve done a great job using the paint to really accent the sculpt. The paint offers just as much detail and texture as the sculpt, and it looks really nice. Cornelius’s only accessory is one of the ancient scrolls. This same piece is also included with the Dr. Zaius figure from this series. I don’t mind the re-use, but it seems to be a last minute addition to the figure. His hands haven’t really been sculpted to hold it, so there’s not much he can do with it. He’s a perfectly nice figure without it, so it doesn’t bother me too much.

THE ME HALF OF THE EQUATION

When I was younger, I used to stay at my Grandparents’ on a fairly regular basis. My dad wanted me to have some things to play with, so he brought out his old Megos. Mostly, I was just focused on the super heroes, but he had a Cornelius, and I remember playing with that one a fair bit. When I finally got around to seeing the movies, Cornelius was far and away my favorite character. When NECA announced they had gotten the Planet of the Apes license, Cornelius was the figure I knew I wanted right away.

Cornelius was purchased for me by my dad from a local toystore by the name of All Time Toys. I wasn’t certain if I wanted the whole first series of this line, so I wanted to get Cornelius by himself. Cornelius is a fantastic figure and I would wholeheartedly recommend him to anyone who is a fan of the movies. Or if you just like really good action figures. Or monkeys!

#0303: Scunner

SCUNNER

PACIFIC RIM

Scunner4

There’s been plenty of movies that have come out since Pacific Rim that have delivered on the awesome quotient, but it’s a movie that had its own definitive style, and it left a very lasting impression on me. That impression was mostly: Holy crap those robots fighting those giant monsters were SO AWESOME!

NECA picked up the license to do figures for the movie. The first two series of figures weren’t bad, but they weren’t quite as awesome as the movie. Most notably, the monsters, or Kaiju, were lacking in detail, articulation, and especially size. Beginning with Series Three, NECA set out to fix this, going so far as to split the Kaiju off into their own sub-line so that they could truly be the gargantuan creatures they deserved to be. Today, I’ll be looking at one of the Kaiju from the film’s climactic underwater battle, Scunner!

THE FIGURE ITSELF

ScunnerWilsonScunner was actually not part of a series-proper. He ended up being a single release in NECA’s Pacific Rim Kaiju sub-line, hitting just a few months after Series One. The figure is about 8 inches standing tall, and it features 29 points of articulation, plus a bendy tail! That’s certainly an improvement over the original Knifehead’s less than 7 inch height and 15 points of articulation. Scunner makes use of the new and improved Knifehead body from the first series of Kaiju. It’s a sensible re-use, as the creature designs used many of the same elements, and it’s also a key plot-point that the creatures are all manufactured by mixing and matching parts. If you’re going to get extra mileage out of a sculpt, this is definitely a good one to do so with. The sculpt is well-detailed, well-proportioned, and well-articulated to boot. In addition to the Knifehead parts, Scunner gets a brand new head sculpt and a torso overlay to reflect his slightly tweaked design. The pieces match the quality of the body pieces very nicely, and accurately reflect the design of the creature in the movie. Scunner has been molded in a dark gray/brown plastic, with paint to add texturing as well as Scunner’s bioluminescent features. The paintwork is mostly good, and is definitely a step up from previous Kaiju offerings, but there are still a few areas of slop, most noticeably around the edges of the bioluminescent green. Fortunately they aren’t too distracting, but it would be nice if it were a bit cleaner. Scunner includes no accessories, but given the lack of any real accessories to include coupled with the sheer size and mass of the figure, this is forgiveable.

Scunner5Scunner7

THE ME HALF OF THE EQUATION

Scunner was picked up from a small toy store called All Time Toys, located near where I live. While Super Awesome Girlfriend was visiting, she and I went out and about to explore the area. We stopped by the store, and I was definitely intrigued by their impressive Pacific Rim display. I resisted the urge to buy anything, and we continued exploring. However, we had to pass the store on our way back to the car, and Super Awesome Girlfriend, living up to her name, encouraged me to go back in for one of the Kaiju. I decided on Scunner, as I felt he offered the most unique look of the possible options. He’s really a fun figure, and it’s nice to finally have a Kaiju that matches the quality of the very impressive Cherno Alpha from the most recent series of Jaegers.

Scunner6

#0249: The Joker

JOKER

BATMAN: THE ANIMATED SERIES (KENNER)

Joker

One of the greatest things to come out of the 90s (aside from yours truly) is Batman: The Animated Series. The series is, in my opinion, the definitive take on Batman and his supporting cast. Since the series aired in the early 90s, it played a decent role in shaping my interests in all this comic stuff. So, it should come as no surprise that I ended up with a decent sized collection of the tie-in figures prodiuced by Kenner around the time of the show. Today, I’ll be looking at Batman’s #1 foe (other than guns and living parents) the Joker. And this isn’t just any Joker, no no. This is Mark Hammil’s Joker, the very best kind of Joker!

THE FIGURE ITSELF

Joker was part of the first series of Batman: The Animated Series figures. He stands about 5 inches tall and features 5 points of articulation. He’s based on Joker’s basic appearance in the show, specifically his “old school” look, which is the design from the initial run of the show. The figure featured an all new Joker2sculpt, although parts of it would see re-use on later Joker figures. It’s an alright approximation of his look on the show, though it’s not quite spot on. He seems to be a bit too squat for the character, but otherwise, he looks decent. The paintwork is fairly basic, in fact he’s mostly molded in the appropriate colors, but what’s there is well applied, with little instance of slop or bleed over. The palate seems a bit off, though. The purple seems a little too pale, the yellow seems too dark, and, the biggest issue, his skin tone has an odd green tint to it. Joker was accessorized with an odd water shooting backpack with a gas mask attached. You know, like the one he had all those times on the show….

THE ME HALF OF THE EQUATION

Joker was a later addition to my collection. When I was growing up, the version in the trench coat from Mask of the Phantasm was my basic Joker, as this one had long been gone from stores. A few years ago, I tracked one down at a small toy store near me. He’s a decent figure, and he compliments the rest of the Kenner line fairly nicely.

#0218: Captain Ace

CAPTAIN ACE

GI JOE 25TH ANNIVERSARY

Ace

“He’ll fight for freedom, wherever there’s trouble, G.I. Joe is there!” or here rather. Yep, it’s another G.I. Joe review. Yet again, I’m pulling a figure from the A Real American Hero incarnation of the franchise. This time around, is one of G.I. Joe’s trusty pilots, Ace. Or, as he’s been named due to trademark issues, Captain Ace. Hey, he lucked out compared to some of the others, believe me.

THE FIGURE ITSELF

Ace is one of the figure’s from Hasbro’s G.I. Joe 25th Anniversary line. He comes from one of the line’s two-packs, where he was packaged with a figure of Cobra pilot, Wild Weasel. I picked up Ace on his own, so no Weasel review, I’m afraid. Ace stands about 3 ¾ inches tall and has 22 points of articulation. He’s based on Ace’s original design from his ’83 figure, and, according to yojoe.com anyway, features an all new sculpt. I know several pieces of this sculpt were also used on the 25th Anniversary version of fellow pilot Wild Bill, but I guess Ace came first. Ace’s sculpt is very nice, with lots of great detail work in the folds of the jumpsuit. His head sculpt also has the appropriate “hotshot pilot” vibe. Ace also features a harness add-on, which helps to further emulate the look of the original figure. It’s a nice piece, and it sits pretty well. Ace’s paint is a bit on the messy side. There’s a few spots of bleed over and his face paint is just odd, giving him a bit of a wide-eyed stare. It’s a bit of a letdown, given how nice the sculpt is. Ace includes a helmet and a display stand with his name and the G.I. Joe logo.

THE ME HALF OF THE EQUATION

I picked up Ace a while after his release, from a local toystore. I got him loose, hence the lack of pack-mate Wild Weasel. I’ve always liked Ace, though this is actually the first figure of him I ever got. He’s a cool figure, but I do wish the paintwork were a bit better.

#0208: Aquaman – Camouflage

AQUAMAN – CAMOUFLAGE

DC UNIVERSE CLASSICS

Aquaman(Camo)

Aquaman tends to get a bad rap. People are very quick to label him as “lame” or “stupid.” Now, I’m not one to tell people they aren’t true fans, or say my opinion is law or anything, but I feel like people that write the character off like that aren’t really looking at the character too closely. I mean, the guy lives at the bottom of the ocean. Dude’s gotta be super-jacked! Certainly not the kind of guy I’d want to make fun of.

That being said, in the 80s, Aquaman got a mini-series where he was given a new costume to replace his classic orange and green look. It was water camouflage.  It was lame. It was stupid. And, it was one of the versions of the character released in Mattel’s DC Universe Classics. “Ethan, if you think the costume is lame and stupid, why do you have an action figure of it?” Because shut up, that’s why!

THE FIGURE ITSELF

Aquaman was released in the 7th series of DC Universe Classics. He is in the aforementioned “Aqua-Camo.” The figure is about 6 ½ inches tall and features 25 points of articulation. He’s built on slightly larger male buck, which fits the king of the seas, I suppose. His head is reused from DCUC’s previous Aquaman figure. Yes, he was a total re-use figure. At least the reused parts are good pieces. The head sculpt is definitely one of the line’s stronger pieces. It has just the right amount of nobility and heroism that should be present in the king of Atlantis. One thing I did notice is that he has a slight mutilation on his face that results in some lines that shouldn’t be there. I actually like the look, as it kind of look like some cool scarring, but I imagine not everyone would be so thrilled. The paint work is pretty good. They’ve replicated the design of the suit very well, and it does really pop, which is always nice. It has a few fuzzy lines here and there, but nothing out of the ordinary for a DCUC figure.  Aquaman includes a trident and a piece of the series’ C-n-C, Atom Smasher. This is my first Aquaman I’ve reviewed on the site, so I’m gonna address this here: what is up with the tridents? Aquaman pretty much never carries a trident, and yet every single Aquaman figure’s got his friggin’ trusty trident!

THE ME HALF OF THE EQUATION

I purchased this figure for two reasons: I wanted to finish Atom Smasher, and the basic Aquaman was hard to find. Seriously, I’ve never actually seen the regular Aquaman in person. The series he was in was pretty much impossible to find. So, I had to settle for true blue here. He’s actually not a bad figure, even if I’m not the biggest fan of the costume. He also adds a nice splash (heh!) of blue to the JLA shelf.