Tag Archives: Avengers

#1234: Super Adaptoid

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SUPER ADAPTOID

MARVEL AVENGERS PLAYMATION (HASBRO)

Man, the toys-to-life thing sure imploded fast.  After the success of Skylanders and Amiibo, everyone and their mother wanted in on it.  While Lego’s Dimensions attempt seems to have taken off in much the same way as the first two, Disney’s Infinity was discontinued in fairly short order (despite early success).  Somewhere along the line, Hasbro also tried their hand at the concept, creating their Playmation line, which I think most people were unaware even existed.  It got a handful of the figures out there, but its far more limited scope (they only did Avengers characters) and overlapping with the already failing Disney Infinity meant that never really took off or got any sort of notoriety.  It did manage to offer a few somewhat unique items, including today’s focus, the Super Adaptoid, an Avengers foe that had, up to this point, gone without any action figures.

THE FIGURE ITSELF

The Super Adaptoid was released in the second round of basic Marvel Avengers Playmation figures.  The Playmation figures were bigger than most other toys-to-life items, being a just slightly smaller scale than Hasbro’s Marvel Legends and the like.  The Adaptoid stands just shy of 6 inches tall (which, with his slight kneel, means he’s close enough that you can fudge the scale, should you want to display him with your Legends collection).  Another change that Playmation offered was giving the figures some articulation; it’s not a lot, but the Adaptoid can move at the shoulders, neck, mid-torso, and a little bit at the hips.  You’re not going to get a ton of variety in how he can be posed, but it’s enough to make him more than a statue. The Super Adaptoid has had a few looks over they years, with his most prevalent being an all-green amalgamation of Cap, Hawkeye, Iron Man, Wasp, and Thor.  This figure isn’t quite that design, but it’s a slightly modernized take on it, I guess.  It’s sort of like they married his classic design with his design from Avengers Assembled.  It’s not a terrible look, and probably a lot less goofy looking than his original design, while still keeping a lot of the basic traits.  It’s workable, and I certainly prefer it to his last comics appearance design.  The figure’s sculpt is actually pretty cool; a lot of this line’s figures looked sort of odd or strangely inhuman, but for a character like the Adaptoid, it’s not a bad thing.  The various stolen hero details are petty cool, and you can pretty clearly discern what came from whom.  As far as the pose goes, it’s not too extreme a pose, but also not as boring as a simple standing pose.  The legs seem a little odd, but they aren’t terrible, and at least he can stand.  I also appreciate the small little base, which has him standing on the remains of one of the Ultron drones.  It keeps him standing steady and looks cool to boot.  That’s the way to do it.  Now, Hasbro could have taken the easy way out on the paint and just done him in mostly solid green.  However, they didn’t do that; they actually used a nice variety of greens, which keeps the consistency from the comics, while also providing some nice depth to the look. 

THE ME HALF OF THE EQUATION

I didn’t pay much attention to Playmation when it was hitting retail, mostly due to owning lots of the characters presented lots of times over, and typically in a superior form.  That being said, I caught this guy’s image on the back of one of the packages and was moderately intrigued.  I even thought about picking him up at full price a few times, but I just never got around to it.  Eventually, I ended up finding a whole bunch of them at Ollie’s.  This guy was like $3, which was good enough for me to finally pick him up.  I’m glad I did.  I still don’t really have any interest in the actual game these guys were attached to, but a cool Super Adaptoid is a cool Super Adaptoid.

Flashback Friday Figure Addendum #0006: Ultron

Posted by Ethan Wilson in Flashback Friday Figure Addendum and tagged with , , , , , ,

0040

Alright, it’s time for another Flashback Friday Figure Addendum!  Today’s figure is another Toy Biz Marvel entry, though this one’s from a bit later in the reviews.  Let’s have a second look at Avengers: United They Stand’s Ultron!

Ah, yes, Avengers: United They Stand.  Poor A:UTS. it gets a lot of hate and I’m not certain it deserves it.  Perhaps it wasn’t the greatest depiction of the Avengers to grace the small screen(That honor goes to the more recent Earth’s Mightiest Heroes), but I didn’t think it was all that bad.  The designs and animation may be late 90s over complication at its finest, but I thought the characterization was actually nicely done, and I loved the fact that the focus was on the slightly lesser known Avengers instead of Cap, Iron Man, and Thor.  One of my other favorite things was the tie-in toyline, which is what I’ll look at today.  In particular, the toy counterpart of the shows recurring antagonist: Ultron!  This isn’t the first time Ultron’s been mentioned on this blog.  I previously mentioned him in passing in my Vision review, where I mentioned Ultron was the creator of Vision.  Ultron himself was the creation of Avengers founding member Hank Pym, aka Ant-Man, aka Giant-Man, aka Goliath, aka Yellow Jacket, aka Wasp, aka Dude with serious identity issues!  Ultron rebelled on his creator and became a powerful Avengers foe.  He’s also set to be the villain in the upcoming Avengers sequel.

THE FIGURE ITSELF

Ultron was released as part of the first wave of Toy Biz’s Avengers:United They Stand tie-in line.  Ultron had several different looks over the course of the show, but this one seems to be a bit of an amalgam of the various looks, with the largest portion of influence coming from his appearance in the show’s first two episodes.   He stands just over 5 inches tall, and features 11 points of articulation (13 if you count the moving knee-pads).  Ultron is a completely new sculpt.  It’s well done, and quite detailed, especially for its time of release.  In particular, the head really captures the look of the character.  The paint is pretty well done, being mostly all one color; a nice bluish silver.  There’s a wash over the whole figure to help bring out the details.  The figure also features a light-up feature.  By pressing the button on Ultron’s waist, you could make the figure’s eyes and mouth light up.  It’s a neat feature that helps to further simulate the look of the character from the show and comics.  At one point, Ultron had a large cannon that hooked onto his right arm, but I’ve since lost that piece.

THE ME HALF OF THE EQUATION

My dad bought Ultron for me when he was initially released.  We happened to stop at a Toys R Us and there he was.  He was one of the last figures I acquired from the line.  It wasn’t because I didn’t want one, but because the A:UTS figures were quite difficult to find initially, so I kind of got them when I saw them.  Growing up, he was the closest thing I had to a classic Ultron.  Because of that, I have quite the soft spot for him.

Okay, now we’re getting somewhere!  This review is from my second month writing reviews, and you can start to see some of the regular review features coming into play.  Height, articulation and paint are all actually addressed this time.  And I even made it past 500 words!  Granted, most of it was the intro, but still.  Also, this is my first Flashback to a post-random review period. Cool.  Cool cool cool.

My actual review was pretty on point for this guy.  The only thing missing was his big ol’ arm cannon, which was amongst the many items excavated during The Find.  It’s goofy, but also manages to match pretty well with the rest of the figure stylistically, and, amazingly, it doesn’t impede his movement when attached (of course, the shoulder’s still a bit restricted thanks to the wiring that allows it to light up).  Also, I neglected to mention in my original review that Ultra’s sculpt, was an early product of the fine folks at Art Asylum, who would later launch one of the best Trek lines ever put into plastic, as well as creating my favorite brand of all time, Minimates.

I’ve actually got a story about this one! As a kid, I lost this figure around Christmas time and couldn’t locate him for a whole year.  Come the next Christmas, I put on my robe I wore one a year on Christmas morning and found this guy in the pocket.  Seems I’d stowed him there for safekeeping the prior year and total forgotten.  To date, this figure remains my favorite figure of Ultron, so I’m happy he wasn’t missing for too long!

#1200: Thor

Posted by Ethan Wilson in Reviews and tagged with , , , ,

THOR

THE AVENGERS (HOT TOYS)

thorht1

Well, it looks like I made it another hundred reviews.  That’s cool, I guess.  Admittedly, we’re getting to the point where 100 reviews doesn’t feel like that big a deal anymore.  I mean, I’ve done it 12 times, so, maybe I should up the interval again.  I don’t know.

Anyway, it’s an ’00 review, which means it’s time for another high-end figure review.  Once again, it’s a figure from our friends over at Hot Toys.  More than a few of my Hot Toys figures hail from the MCU, and today’s entry is no exception.  Yes, it’s the God of Thunder himself, Thor Odinson!  Is the last name too much?  It sounds goofy, doesn’t it.  But, well, that’s his name.  So there it is.  Onto the figure!

THE FIGURE ITSELF

thorht2Thor is figure 175 in Hot Toys’ Movie Masterpiece Series, which puts him smack dab between the Avengers versions of Captain America and Loki, which is sensible.  Like those two, he’s based on his appearance in The Avengers, specifically his fully armored up look from the film’s climactic battle.  He hit in early 2013, which was actually pretty good turnaround for a HT figure of the time, arriving less than a year after the movie he was based on.  The figure stands about 12 1/2 inches tall and has “over 30 points of articulation” going by the blurb on the Sideshow website. 

First off, let’s have a look at Thor’s noggin.  When this figure was first shown, there was quite a bit of contention over the likeness on the head, due to the prototype shots looking less than stellar (he looked more like Leonardo DiCaprio than Chris Hemsworth, and those two don’t particularly look similar).  The final product showcased a marked improvement.  The final sculpt isn’t a spot-on Hemsworth likeness, but it’s very, very good.  A lot of it depends on the thorht3angle; when viewed from the right, as seen in the close-up shot, it’s clearly Hemsworth, but flip over to the other side and the likeness gets off pretty quickly.  You can always tell who he’s supposed to be, but it’s not always very convincing.  Likeness aside, the actual detail work is solid regardless; his face has tons of subtle little wrinkles and such, which really make him look like a real person, and the detailing on the stubble of his beard is surprisingly well-rendered.  Thor has long hair, and no matter how you handle that, there are always some compromises.  HT opted to go sculpted for this figure, which I think was the right call.  The hair is decent enough, but there are definitely some section s that are more convincingly hair than others.  Also, there’s a seam running near the front of his head, which is more present than I’d like.  As far as paint for the head, it’s the usual HT standard of insanely lifelike.  Really, it’s quite impressive how well down they have this.  The eyes in particular are what really sells it for me; there’s just so much life behind them.

Thor’s costume more of a mixed media effort than usual for HT.  The vest, pants, cape, and the red sections of the wrist bands are all cloth pieces, and are mostly tailored pretty well to the body.  The pants look a little odd in certain poses, almost looking backwards at times, but they’re not bad.  I like the brightness of the cape, and it’s a good, sturdy material, which is always a plus.  The rest of Thor’s costume pieces (the outer vest, sleeves, wrist guards, and boots) are constructed from various sculpted elements.  By and large, they do a good job capturing the movie’s designs.  The sleeves are a rubber cover for the arms, and do most of the work to give the arms actual shape.  They look good, but end up being very limiting when it comes to posing the arms; the elbows barely have even 45 degrees of movement, and even then, they have a tendency to slowly return to a straighter pose, due to the heaviness and thickness of the material.  Later Thor figures tackled the sleeves/arms by just putting a joint on the outside, but they were still figuring everything out for this guy.  The boots are each two pieces: a foot and a slip-over piece that covers the shin.  This is nice from a movement perspective, but ends up looking a little goofy in practice.

Thor isn’t super heavy on the accessories, but he does have a few fun pieces.  He comes with:

  • 9 hands
  • Mjolnir
  • The Tesseract in its fun little carrying case from the end of the movie
  • Display stand

thorinventoryThe hands come in relaxed (L and R), fists (L and R), tight grip (L and R), loose grip (L), and wide gesture (L and R).  They’re all very nicely sculpted, and look like real hands.  They’re a bit difficult to swap out, but do ad some nice expressiveness to the figure.

Mjolnir is definitely the main highlight here.  It’s made from metal, which gives it some really nice heft, and there’s even a little leather strap at the bottom, just like in the movie.

The Tesseract is definitely the most unique of the pieces. It’s sort of fun, and allows Thor to be posed with the Loki figure, like at the end of the movie.  It also continued the trend of giving us all possible variations of the Tesseract, after the normal one from Red Skull and the one in the metal case from Nick Fury.

Last up is the stand, which is the same basic stand we’ve seen tons of times before.  There’s a logo for Avengers and Thor’s name is on the front.

THE ME HALF OF THE EQUATION

I pretty much have Thor because I was getting the rest of the Avengers line-up from the first movie, but what’s kind of amusing about him is that he was really the lynchpin of me getting the whole set.  Initially, I had just planned to get Black Widow and Hawkeye to put with my Mech Test Tony Stark and First Avenger Captain America.  Then I realized I would have most of the team, so I went ahead and pre-ordered Thor, which eventually led to me picking up both the Mark VII and Hulk, and realizing I might as well get Cap as well.  So really, it’s Thor’s fault.  Silly Thor.

#1186: Falcon & Tigra

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

FALCON & TIGRA

MARVEL MINIMATES

falcontigra1

Following yesterday’s lead, today I’ll be looking at another set of figures from the latest comic-based series of Marvel Minimates, which is heavy on the classic Avengers theme this time around.  Today’s set gives us another take on one of my favorite parts of the Captain America mythos, Falcon, as well as recurring Avenger and all-around under-appreciated character Tigra.  Yes, that’s right, they packed the bird person and the cat person together.  Clever DST.  Clever.  Onto the figures!

THE FIGURES THEMSELVES

Falcon and Tigra are both part of Series 69 of Marvel Minimates, officially dubbed the “Most Wanted” series.  These two are something of an odd pairing for their main universe counterparts (aside from the cat and canary gags), but it’s worth nothing that the two were sort of an item in the 1999 Avengers: United They Stand cartoon, for what that’s worth.  It’s worth a lot to me, but probably not much to others, since I think I’m like one of two people in existence who even remembers that show.

FALCON

falcontigra2Man, remember when it was a really big deal when Falcon finally got his first ‘mate in Series 54?  In less than three years, he’s gone from no Minimates to a whopping 6 of them!  Not bad!  So far, most of Falcon’s ‘mates have skewed more modern, but this one goes back to his early days.  Well, not his earliest days, with all the green and yellow and the total lack of wings.  No, this would be Falcon’s second costume, which is the one that set the tone for all costumes to follow.  Falcon stands about 2 1/4 inches tall and he has the usual 14 points of articulation.  Structurally, he’s the same as his Series 54 counterpart.  Same hair, same wings.  He’s the same person, so that makes sense.  Plus, the parts were a good fit the first time, so if it ain’t broke, don’t fix it, right?  The main difference here is the paintwork, which I have to say, is really well handled.  All of the important details of his classic costume have been translated very nicely into the Minimate form, and the details are all nice and sharp.  They’ve managed to choose the least tacky red/white combo available, which is certainly a good thing, and I really like the nice, friendly smile on his face.  Falcon’s always been characterized as a pretty easy-going guy, so I’m happy we got a more jovial expression for him (and in general, really.  Minimates can sometimes get a little on the stern side).  There are a few spots that could probably stand to be a little cleaner (the hands in particular are rather uneven), but the paint is by and large very good, and better than most of Falcon’s previous ‘mates.  Falcon is packed with his sidekick Redwing, a flight stand, and a clear display stand.

TIGRA

falcontigra4Falcon may be raking in all the Minimates these days, but Tigra here makes her Minimate debut with this figure.  Poor Tigra doesn’t seem to get much respect these days.  It’s a shame, because she’s an awesome character when written the right way, but almost none of the current crop of writers seem to be able to do that, so she’s either reduced to simple sex appeal or just shoved off to the side and totally ignored.  Perhaps she’ll make her way into the movies and get some respect there.  In the meantime, she’s got this pretty sick Minimate!  She makes use of Dazzler’s hair and Cheetah’s claws and tail (they went waaaaaay back for those parts!).  It makes for a pretty good match for Tigra’s usual depictions, showing that some times, re-use really is the best way to go.  The paintwork on Tigra is downright amazing if you ask me.  She’s one of those rare ‘mates that’s completely painted, which always looks better if you ask me.  The orange really makes her pop and the sharpness of the linework, especially on her stripes is just great.  Her facial expression is a much more intense one than Falcon’s, but it’s well-rendered and works quite well for the character.  Tigra’s only accessory is a clear display stand, but I can’t really think of any accessories she’s incomplete without, so it’s enough to make me happy.

THE ME HALF OF THE EQUATION

Like yesterday’s Black Knight and Enchantress, these two were a Christmas gift from my parents.  Black Knight may be my favorite figure from this series, but boy do these two give him a solid run for his money (if this were the first Falcon ‘mate, he’d have definitely come out on top).  Tigra is a fantastic new addition to the Avengers line-up, and Falcon is a more than welcome replacement for the Series 54 version.  Another winning set to be sure.

#1185 Black Knight & Enchantress

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

BLACK KNIGHT & ENCHANTRESS

MARVEL MINIMATES

blackknightenchantress1

It’s Day 18 of the post-Christmas reviews, and we are officially in the home stretch.  Just one more week of these things left.  You know, until I…get back to reviewing action figures after three and a half weeks of…reviewing action figures.

For today’s review, I’m getting back to one of my all-time favorite toy lines, Marvel Minimates.  Now, I must admit, I’ve been a little down on the line the last few years.  Not that the figures have been bad by any stretch (because they haven’t) but more because almost all of the focus was either totally current, event-driven stuff (like AvX, Axis, Infinity, and of course all of the movies) or heavy on the ‘90s X-Men side of things.  Series 68 was definitely a breath of fresh air, offering up a really great assortment of classic X-Men, but I was really longing for some good comic Avengers.  The last comic-based Avengers series was way back in early 2012, and even that only offered two new characters (and one of them possessing a marginal connection to the Avengers at best).  68 was great, but I wanted an Avengers series that rivaled that.  Well, as it just so happens, DST was way ahead of me.  Let’s begin with the Series 69 reviews!

THE FIGURES THEMSELVES

Black Knight and Enchantress are, as noted, part of Series 69 of Marvel Minimates, officially dubbed the “Most Wanted” series, which I certainly think is appropriate.

BLACK KNIGHT

blackknightenchantress3First up, it’s Black Knight, specifically Dane Whitman, the heroic incarnation of the character.  For me, this guy is hands down the star attraction of this series.  Something about Black Knight’s always appealed to me, and up until recently, he hasn’t really been done justice in action figure form (Hasbro’s Marvel Universe version being the one exception).  He’s based on his classic costume, which makes me very happy.  No offense to his other designs, but they always felt like rather pale imitations of his original look.  The figure stands a little under 2 1/2 inches tall and has 12 points of articulation.  He’s built on the standard ‘mate body, with add-ons for his helmet, cape, glove cuffs, and boots.  The gloves and boots are re-used pieces; they’re just basic flared gloves and boots, which work well for the character.  His helmet and cape are both new.  The helmet is spot-on to his comics helmet, and sits very nicely on the head.  The cape is okay, but could be better; it seems to lack some of the dramatic flare usually seen on Dane’s cape, and it looks like something was lost during the transition from control art to final product.  Rarely do I point out something that’s missing on a Minimate, but I was slightly disappointed that Dane just had a painted on belt, with no scabbard for his ebony blade.  It’s a fairly consistent feature of his design, so it’s a slightly odd omission.  That being said, it’s likely a cost thing, and if something was going to be cut, that was the easiest thing.  Black Knight’s paintwork is pretty standard fare for a ‘mate; the colors are all nice and bold, and most of the application good and clean.  I really like the subtle work on the scale mail.  I also quite like the face; it’s intense expression is a good match for Dane’s look on the cover of his first appearance, and it’s always great to get some variety in expressions.  Black Knight is packed with his Ebony Blade (which is the same sword included with the animated Taskmaster ‘mate from a little while back.  It’s a good enough fit for the character), a spare hairpiece for his un-helmeted look, and a clear display stand. 

ENCHANTRESS

blackknightenchantress2It hasn’t been all that long since my last Enchantress review.  It seems 2016 was a good year for her.  Maybe Marvel’s trying to stick it to DC for pushing to get their version of Enchantress to the big screen first?  Regardless of rationale, Amora’s a pretty prominent member of the Thor’s supporting cast, as well as a founding member of the Masters of Evil, and an all-around pretty cool character.  It’s about time she was given her due!  Like Black Knight, she uses the standard ‘mate body, this time with add-ons for the hair and skirt.  The skirt looks to be a standard piece, but the hair is new.  It’s a decent enough sculpt, though it does feel a tad lifeless when compared to some of the other hairpieces in this set.  Still, it looks like Enchantress and that’s really the point.  Enchantress’s paintwork is actually quite impressive.  All the details are very sharp, and there’s a lot of really cool small detail work, especially on the arms and legs.  The face does a really nice job of capturing that alluring, yet still devious look that she’s prone to sport in the comics, and really sells just who this ‘mate’s supposed to be.  Enchantress includes two green effects pieces and a clear display stand.

THE ME HALF OF THE EQUATION

Black Knight and Enchantress were a Christmas gift from my always supportive parents.  As I noted above, this is a series I was really looking forward to, and this set in particular was my most anticipated.  Black Knight’s been pretty high on my Minimates wishlist for a good long while, and I’m beyond psyched to finally have him.  He certainly didn’t disappoint.  Enchantress is no slouch either.  While she may not have quite the same coolness factor as Dane, she’s an essential character, and DST did a great job translating her into ‘mate form!

blackknightenchantress4

#1153: Black Widow & Dark Avengers Iron Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

BLACK WIDOW & DARK AVENGERS IRON MAN

MARVEL MINIMATES

widowdaim1

Hey ho, it’s another Minimate review. They kind of come in clusters, I guess. Of course, where yesterday’s focus figure came from way back at the beginning, today’s is a more recent addition to the line. So, without further ado, here’s Black Widow and Dark Avengers Iron Man!

THE FIGURES THEMSELVES

This pair is part of Series 2 of the Walgreens-exclusive Marvel Minimates. As with all the Walgreens ‘mates, these two are animated series-based, specifically Avengers Assemble.

BLACK WIDOW

widowdaim2Black Widow is one of the main members of the team in Avengers Assemble, so her appearance here isn’t a huge shock, especially since they’ve been steadily working through the animated incarnation of the team. The figure is a little under 2 1/2 inches tall and she has 14 points of articulation. Widow is based on her second costume from the show, which is a bit more distinct when compared to the same basic Widow we’ve gotten a few times, so definitely a good choice. Her only add-on piece is her hair, which she shares with the previously reviewed Gamora ‘mate. It’s a nice enough piece, and I guess it matches well enough with her animated design. The rest of her design is rendered via paint work, which is pretty solid. As I’ve noted a few times before, the animated designs really do translate pretty well to the ‘mate form, and Widow definitely fits that trend. The colors are nice, bright, and bold, and all of the line work is nice and crisp. The figure is packed with a pair of batons and a clear display stand.

DARK AVENGERS IRON MAN

widowdaim3The second season of Avengers Assemble introduced frequent Marvel fixture the Squadron Supreme, who are the Marvel equivalent of the Justice League. They took advantage of the Squadron’s alternate universe to also introduce the Dark Avengers, evil counterparts to the main heroes. DST decided to take advantage of these new designs to offer some slightly more unique designs for the characters we’ve all seen so many times before. The first one was Iron Man, whose design swaps out the red portions of his armor for black, because everyone knows black = evil, I guess. Construction-wise, he’s got add-ons for his helmet, gloves, and belt, as well as special upper arm pieces. Everything is reused, which is generally okay. The Mark 42 arms still aren’t among my favorites, mostly due to serious limitations they place on the shoulder movement. Aside from that, though, he does a decent enough job of capturing the look of the armor on the show. The paintwork on this guy is passable, but nowhere near as nice as some of the others in this subset. He’s rather drab, being a dark blue and a rather cold yellow. Ultimately, he ends up looking like a slightly blander version of the Marvel Now Iron Man from a few years ago. Under the helmet, there’s a Tony Stark face, which is a bit angrier than the usual Tony. The flesh tone on the face is kind of thin, so he ends up looking rather bluish. Also, the figure’s paint just seems rather sloppy in general. The figure is packed with a flight stand and a clear display stand.

THE ME HALF OF THE EQUATION

These two were given to me by my Super Awesome Girlfriend, who bought them from a Walgreens during a trip back home over the summer. Apparently, she likes to buy things for me when she’s stressed. Widow’s a pretty solid ‘mate. Dark Avengers Iron Man is…well he doesn’t feel like the most inspired choice. Of all the Dark Avengers designs, his is really one of the less interesting, and to top it off, his paint work is noticeably lower in quality than others in the series. Overall, I think Widow’s enough to save the pack, but it would have been nice if her pack mate had been more exciting.

#1144: Wonder Man – Energized Emissaries

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MARVEL’S WONDER MAN — ENERGIZED EMISSARIES

MARVEL LEGENDS (HASBRO)

wondermanhas1

Remember that bio I ran with Captain Britain that was no help as an intro?  I don’t think it’s any more help for Wonder Man.  That’s okay, I think I did an alright job of introducing the guy yesterday.  So, without further ado, here’s another Wonder Man figure!

THE FIGURE ITSELF

wondermanhas2Wonder Man is the fifth figure in the recent Abomination Series of Marvel Legends.  His official name is “Energized Emissaries,” which he shares with Captain Britain.  It’s…well, it’s not really a name that works particularly well for either of them.  They seem like an odd pair to share packaging really, since it’s not like they really have anything at all in common.  Ah, who cares about the names, it’s the figures that matter, right?  This figure stands about 6 1/2 inches tall and he has 32 points of articulation.  He’s based on Wonder Man’s most recent costume design, which he was sporting in Uncanny Avengers.  Admittedly, it’s a design I have some issues with.  Most notably, the swapping out the belt for the straps on the upper arms and legs just feels like change for the sake of change.  Still, it’s far from the worst costume the guy’s ever worn, and at least it’s current.  Wonder Man is built on the Grim Reaper body, a fitting choice, given that Grim Reaper is Simon’s brother Eric.  It’s also the same body now being used for Captain America, who is canonically the same height as Simon, so it’s a good fit all around.  Certainly a better choice than the last ML Wonder Man!  Wonder Man gets an all-new head sculpt, which is a decent enough piece.  I personally would have liked the hair to be a touch longer, but this matches up with most of the character’s depictions while in this costume.  He also makes use of the bracer-wearing forearms we saw on the Walgreens-exclusive Namor figure, which are a great bit of re-use.  Honestly, it wouldn’t shock me to find out the pieces were deliberately designed for use with both of them, given how close the figures are in terms of release.  Wonder Man continues the trend of very clean paintwork that we’ve been seeing from Hasbro as of late.  There’s a little bot of slop on his leg bands, but aside from that, the work is very clean.  There’s even the slightest hint of blue on his hair, which adds a nice bit of pop.  Also of note: they actually got his logo right!  Finally!  The last few Wonder Men have all had the Ionic powers represented by a separate figure, but this time around they’ve just been rolled into the main figure, by way of some extra hands and some effects pieces.  He gets a pair of fists (slightly underscaled due to being outsourced from the Bucky Cap body.  How has Hasbro not yet sculpted fists for the Reaper body?) in translucent purple, along with the effects pieces from Havok done up to match.  It’s admittedly not a bad way of showcasing the powers, though I certainly wouldn’t say not to a fully Ionic re-paint.  I’m not sure the effects pieces work quite as well for Simon as they did for Havok, but they work well enough that they don’t bug me.  In addition to the Ionic pieces, he also includes the right leg of the BAF Abomination.

THE ME HALF OF THE EQUATION

As I noted yesterday, Wonder Man’s always been one of my favorites.  That, coupled with his last Legends figure being somewhat lackluster, meant I was pretty excited for this guy.  I ended up grabbing him off of Amazon at the same time as Captain Britain and Scarlet Witch.  Aside from not being my ideal costume choice, he’s a pretty solid take on the character, and a much worthier rendition than the last figure.  Wonder Man gets to be part of the default Avengers set-up again!

wondermanhas3

#1140: Scarlet Witch

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SCARLET WITCH

MARVEL LEGENDS (HASBRO)

scarletwitchcw2

As superhero movies have begun to feature larger and larger casts of colorful heroes and villains, sadly the toys that tie-in with those films have become smaller and smaller.  When it comes to the MCU, ever since the first Iron Man (which really only has like, what, four figures you really need to make?  And two of them are essentially the same sculpt), no movie has really gotten a full-lineup, especially not in the 6-inch scale most collectors prefer (Avengers did eventually get there, but only after a few years and additional movies).  Age of Ultron came pretty close, giving us the six basic Avengers and Ultron Prime, but the three newest additions to the team were sadly left out.  Hasbro’s put quite a lot of effort into getting as many figures as possible out of  Civil War, including Scarlet Witch, one of the characters who got left out of the larger Age of Ultron product.  I’ll be taking a look at her today!

THE FIGURE ITSELF

scarletwitchcw4Scarlet Witch is the first figure in the Abomination series, which is the latest series of the Captain America-themed Marvel Legends.  She’s this series’ resident movie tie-in, and appears to be the last of the Civil War-based Legends, unless Hasbro pulls a surprise out of their sleeves, but that seems unlikely at this point.  The figure stands just under 6 inches tall and she has 27 points of articulation.  Scarlet Witch features an all-new sculpt, based on her Civil War design.  It’s my favorite of the three looks we’ve seen her in so far, so I’m pretty happy about the costume choice.  This figure may actually have one of my favorite MCU sculpts (really, only Panther is better, and his was reeeeeaaaaaally good).  There are a few small details that are a little off (the shoulders on the coat should really be a little more squared off, but that change probably has more to do with better range of motion than anything), but the overall figure is very accurate.  The head’s easily got one of the best likenesses of any of the MCU Legends; there are a few angles where it’s ever so slightly off, scarletwitchcw1but there’s really no denying that this is Elizabeth Olsen.  Also, I rarely talk about hands, but the hands on Wanda are pretty phenomenal; they’re perfectly posed to replicate her “spellcasting” look from the movies, and look awesome in a ton of different poses.  Hasbro’s been trending upwards in terms of paint application, and Scarlet Witch definitely benefits from this.   Slop and bleed over is minimal, and the colors match pretty well with the onscreen design. The face in particular is not only very clean, but also has degree of life to it, which a lot of the MCU figures haven’t quite gotten.  If there’s one downside to this figure, it’s the accessories.  She includes two effects pieces for her hands, which aren’t awful, but don’t really look much like how her powers manifest onscreen, and are just sort of a general step down compared to the effects pieces included with more recent figures.  She also includes the head of this series’ BAF, Abomination.

THE ME HALF OF THE EQUATION

This is a figure I’ve been waiting for since Hasbro first showed it off earlier this year.  I’ve yet to see this particular series turn up anywhere nearby, and on top of that, Wanda’s by far the most sought after in the set.  Her price online was pretty high for a while, but she finally came down to pretty much retail on Amazon, so I ordered her there.  I really like this figure a lot, and I’m very happy to be able to add her to my MCU collection.  Between her and Panther, I have high hopes for future MCU Legends.

scarletwitchcw5

#1108: Rage

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MARVEL’S RAGE

MARVEL LEGENDS SERIES (3.75)

rage1

There are a lot of rather obscure characters in comics.  It sort of comes with the territory, since you can’t expect every single character who appears in a monthly installment of serialized fiction to be beloved by the masses.  What’s interesting with some of these characters is how close to high profile they get.  Take today’s entry, Rage, for instance.  Rage was a member of the Avengers, for over a year no-less, but most people would be completely unable to ID the guy if they saw him.  He did get something of a cult following from his stint with the New Warriors, and now he’s even got an action figure, so maybe things are looking up for him!

THE FIGURE ITSELF

rage2Rage is from the second series of the 3 3/4 inch scale Marvel Legends line by Hasbro.  Thanks to Living Laser’s presence in the set, he may not even be the most obscure character from the series, which is kinda saying something.  The figure stands a little over 4 inches tall and he has 19 points of articulation.  The reduced articulation of this line is something I’ve addressed a few times, and mostly I don’t find it ruins or holds back the figures too badly.  However, Rage seems far stiffer in terms of range than prior figures, and on top of that, his head can’t actually turn more than a few degrees before popping off, which is really annoying.  Rage is seen here in his original costume.  It’s not a particularly attractive design, but let me tell you, he’s had far, far worse during his career.  Rage is built on one of the larger male bodies, with character specific pieces for the head, lower arms, and lower legs, and add-ons for his jacket and belt.  The jacket and belt are definitely very strong pieces, and the hands and feet are pretty good too.  Something about the body and the head seems a little too smooth for me.  Like he’s unfinished or something.  It’s hard to say, but it really feels evident on the torso.  It’s on par with a lot of the other stuff from this particular line, so I can’t really say he’s an outlier in that regard, but I also can’t say that’s much of a point in his favor.  I just sort of wish the whole sculpt matched the quality on the vest.  Rage’s paintwork is generally pretty straight forward.  It’s mostly just solid color work, which works fine for the character.  There’s a little bit of accenting on the vest and pants, which goes a long way, and gives him some much needed pop.  Rage has no accessories, but I can’t really think of what you’d give him anyway.

THE ME HALF OF THE EQUATION

Rage here was picked up for me by totally rad brother, who got him for me while I was away with Super Awesome Girlfriend and her family.  Back when the Marvel Universe line was in full-swing, I put a lot of effort into tracking down as many Avengers in that scale as I could get ahold of, so from that perspective, Rage is pretty cool to finally have.  Could he be better? Probably, but this is quite possibly the only Rage we’re ever going to see, and he’s far from the worst thing ever.

#1070: Sam Wilson – Captain America, Vision, & Kate Bishop – Hawkeye

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , ,

SAM WILSON – CAPTAIN AMERICA, VISION, & KATE BISHOP – HAWKEYE

MARVEL LEGENDS SERIES

falccapviskateguy1

Wow, Hasbro sure is swamping us with Marvel Legends, aren’t they?  After a fair delay, the Giant-Man Series finally hit just about everywhere, very closely trailed by the Juggernaut Series.  The Abomination and Dr Strange series are also starting to hit in some areas as well. On top of that, there have been a number of exclusive items, with Walgreens getting two figures right on top of each other, and Walmart getting a pair of exclusives (that I still need to find).  There have also been two boxed sets: the Civil War Spider-Man set (which had a movie Spidey alongside re-decoed versions of Cap and Iron Man), and a set containing Sam Wilson as Cap, Kate Bishop as Hawkeye, and Vision…as Vision!

THE FIGURES THEMSELVES

This trio is exclusive to Toys R Us and is loosely themed around looks from the post-Axis Marvel Now! stuff.  Sam and Kate both follow a firm legacy heroes theme, which kind of makes Vision stick out a bit.  Of course, flip-side, Sam and Vision are both part of the main Avengers line-up, and Kate isn’t.  So, exactly who’s left out is really up to you.

SAM WILSON – CAPTAIN AMERICA

falccapviskateguy5We’ve gotten him in both Minimate and 3 3/4-inch form, so it was about time we got a FalCap Marvel Legend.  Bonus points for being the first Sam Wilson Legend since the Toy Biz run!  The figure is about 6 1/2 inches tall and he has 32 points of articulation.  Structurally, he shares several pieces with 2014’s Marvel Now! Cap figure.  He has the arms, legs, and pelvis from that figure, along with an all-new head, torso, belt, and shoulders.  The Now! Cap parts aren’t a perfect match for FalCap’s design, but they’re close enough to work without too much trouble.  The new pieces match up well with the older parts, and are pretty decent sculpts on their own terms as well.  I wasn’t 100% sold on the head sculpt at first glance (as with so many of Hasbro’s Cap sculpts, I think it looks a little too mean for the character), but after having it in hand, I actually don’t mind it.  His hair seems a little closer cropped than his usual comics appearance, but it’s not like it’s completely wrong or anything.  All in all, it’s one of those sculpts that has some minor flaws here and there, but looks a lot better as a whole, which is what really matters.  The paintwork on FalCap is pretty solid. The shades on the colors are a bit more subdued than those on Now! Cap, which is fair, since he was probably a little too bright.  These colors look about right for Sam’s comics design, and still have enough vibrance to give him some pop.  The application of said paint is decent enough, though there’s still a bit of slop, especially on the switches from blue to white.  He could be a little better, but he could also could be far worse.  FalCap includes his mighty shield, which is all well and good, but what he doesn’t include are his wings.  Sure, he doesn’t always have them, but he does most of the time, and their omission here is a bit glaring.

VISION

falccapviskateguy3Vision’s a popular guy!  This is his third Legend in the last year, and the second time he’s been in one of these exclusive three-packs.  This time around, he’s based on his Daniel Acura-designed look from the latter half of Remender’s Uncanny Avengers run, which also happens to be the costume he’s wearing currently.  If I’m honest, it feels a little over designed, though, and I miss the yellow.  Also, the red bits make it look like he’s running around half naked.   That said, I like it a bit better then his first Now! look.  The figure is about 6 1/4 inches tall and he has 32 points of articulation.  He’s built on the Bucky Cap body, with a new head and an add-on for the cape.  I was a bit disappointed with the last Vision head sculpt, so I’m happy they didn’t re-use it a third time here. This may well be my favorite Legends Vision sculpt.  It just captures the character quite nicely, and is very sharply defined features.  The cape is kind of an awkward design, but it’s been translated into three dimensions well enough.  It’s definitely a better attempt at a cape than the one Hasbro was using before (which, judging by all the currently shown figures, has been justly retired from the line).  Paint is the one real downside to this guy.  Of the three figures included in this set, this guy definitely has the sloppiest paint in the bunch.  It’s just all over the place.  I mean, he looks okay from a normal viewing distance, but up close he’s got a lot of rough edges, and there’s a few spots where the paint doesn’t really follow the sculpt very well.  That being said, the colors are at least nice and vibrant, and he stands out quite nicely on the the shelf.  Vision doesn’t get any accessories, but I can’t really think of what you’d give him, so that’s okay.

KATE BISHOP –  HAWKEYE

falccapviskateguy2At long last, Kate Bishop makes her way into the action figure world!  It took them long enough, since the rest of her Young Avengers teammates were released way back in 2006.  Of course, this costume doesn’t technically match the rest of them, and we still don’t have Cassie Lang, but let’s not kick the gift horse in the mouth here.  Kate here is sporting her more recent, jumpsuit look from the pages of the last two Hawkeye series.  It’s not a bad look (and it makes me feel a little bad that I never got one of the Now! Hawkeye figures), and it’s the one she’s been wearing for the last several years.  The figure is about 6 inches tall and she has 27 points of articulation.  She’s built on the Phoenix body, which is definitely a good one.  It works pretty well for Kate, especially since this is the slightly more grown-up version of Kate from the last few years.  She gets a new head and lower legs, which blend well with the rest of the body.  The head does a very good job of capturing Kate, and possesses a lot more personality than is usually seen on female figures.  Kate also got a new left hand for gripping her bow, which is cool.  She has to make due with the basic open gesture right hand to be her drawing hand, which isn’t perfect, but isn’t as bad as you might think.  She also gets an add-on piece for her belt and quiver, which sits very nicely, and does a great job of completing her look.  Kate ends up with the best paintwork of the three figures in this set (which is nice, since it’s her debut figure and all).  It’s still not 100% perfect, but it’s pretty close.  Kate is packed with her bow, which is the same one included with the last few Hawkeyes, but with proper paint this time around.  Some arrows might have been nice, but the lack of them isn’t new to this figure, so it’s not hugely surprising.

THE ME HALF OF THE EQUATION

I picked these guys up from my local TRU last month.  I was actually searching (unsuccessfully) for the Juggernaut series at the time, so these guys were a little bit of a surprise.  This is a set I’ve been eagerly awaiting, ever since it’s announcement.  Kate is the main draw, of course, since she’s never had a figure before, and I’m a pretty big Young Avengers fan.  She’s the strongest figure in the set, too, making her the   real star here.  That being said, FalCap was somewhat overdue, the new Vision is much appreciated, and both figures are both really solid additions to the line.  Unlike prior sets, all three figures included here are real winners, and I don’t think any of the three feels like a forced heavy hitter.

falccapviskateguy7