#2119: Assault on Ryloth

WAXER, BOIL, CLONE COMMANDER CODY, & MACE WINDU

STAR WARS: THE CLONE WARS (HASBRO)

“Jedi generals and clone troopers battle the Separatists who have taken control of the planet Ryloth, homeworld of the Twi’leks. Mace Windu coordinates battle plans as he prepares to bring gunships onto the planet. Clone Troopers Waxer and Boil, who are eager for combat, join Clone Commander Cody on a mission to free Twi’lek prisoners being used as shields to protect a deadly proton cannon.”

Fairly early on in Star Wars: The Clone Wars, the show runners realized that a show with “Clone” in the title was going to have to lean pretty heavily on clones as characters.  With that taken into consideration, the previous depictions of clones literally just being whole squadrons of the same guy a couple dozen times over wasn’t going to work.  Over the course of the show’s first season, they began introducing the audience to lots of troopers, all with individual names and personalities, many of them even getting their own small arcs.  There were a few clone-centered early on, which included my personal favorite episode, “Innocents of Ryloth,” the middle entry of Season 1’s Ryloth trilogy.  “Innocents” brought in troopers Waxer and Boil, and bickering pair that would crop up a couple more times over the course of the show.

THE FIGURES THEMSELVES

Waxer, Boil, Clone Commander Cody, and Mace Windu make up the “Assualt on Ryloth” Battle Pack, which was available exclusively at Target in 2009.  The set is based primarily on “Innocents,” though Mace’s presence brings in the follow-up, “Liberty on Ryloth.”

WAXER

Technically, Waxer appeared prior to “Innocents,” as part of the tie-in comic “Slaves of the Republic.”  Of course, the timing is close enough that Waxer was likely created for the show first and dropped into the comic later, given production cycles and all.  Whatever the case, Waxer’s appearance in “Innocents” is certainly the better showcase.  The figure stands 3 3/4 inches tall and he has 24 points of articulation.  All of the figures in this set were built from pre-existing molds, which really isn’t too surprising for Waxer, what with him being a clone and all.  Nevertheless, there’s a surprising amount of frankenstiening going on here.  Waxer uses the body of Clone Trooper Denal (meaning he’s got a spot for a backpack…not that he includes one, of course), with Commander Thire’s dual holster-sporting belt, and the original Captain Rex head, all topped off with the upgraded removable helmet first seen on Gree.  The holsters on the belt on show accurate, and I’m not entirely sure why they went with the torso with the peghole, but beyond that Waxer’s as good as any figure built from the basic clone parts, which is to say he’s very good.  He poses well, and his helmet sits properly and tightly on the head, and he’s fairly accurate to the animation models.  His paintwork is solid stuff, though it’s worth noting this set was released in a period when Hasbro was going for cleaned up clones.  He still gets his proper 212th markings, as well as his personalized helmet, with tally marks and all.  Waxer is packed with a pair of DC-17 Blaster pistols, as well as a DC-15A rifle.  Technically, he’s carrying the 15C in the episode, but it’s not like I don’t have a bunch of those I can give him, including one of the two in this very set.

BOIL

Though he never seemed to get the same prominence as Waxer, Boil ended up as the more fortunate of the two, since he was one of the few prominent clones still alive at the end of the show’s run…at least as far as we knew.  Boil and Waxer’s designs were very similar, but Boil ended up sticking with the Rex/Basic Trooper hybrid body that was first introduced with Matchstick, with the head of Commander Cody.  No extra holsters or spots for back packs on him.  He does *technically* still have Cody’s molded scars on his forehead, but there’s enough else going on that you really don’t notice them.  Beyond that, he’s another pretty solid clone figure.  His paint does change up things ever so slightly from Waxer.  Obviously the head’s different, what with the mustache and all, as is the helmet, which has Boil’s specific markings and graffiti.  There’s one more rather minor change between the two: Boil has solid colors on the shoulders, while Waxer had stripes.  In the show, they actually both had stripes, but when they they got their ARF armor in their second appearance, Boil had one solid shoulder to further distinguish.  This figure just carries that forward symmetrically.  It’s not technically show accurate, but I really don’t mind the slight change for the sake of a slightly more unique figure.  Boil isn’t quite as heavily armed as Waxer, with only a DC-15C blaster rifle.

CLONE COMMANDER CODY

As the clone in charge of Waxer and Boil’s battalion, Cody’s definitely a sensible choice for inclusion.  He’s essentially just a reissue of his single release figure from the main line.  Cody shared his legs and lower arms with the standard early line clones, but had his own head, torso, pelvis, and upper arms.  The head is the same one I just looked at for Boil, but the scarring now makes sense.  The other parts incorporate Cody’s unique armor elements.  Curiously, his torso, and especially his waist, is really skinny when compared to all of the other Clones released around the same time.  Was Cody just more conscious of his figure?  Whatever the case, Cody’s sculpt is just as strong as the other two clones, making him another really solid figure offering.  For the most part, Cody’s paint is identical to his single release, though the orange on his armor was dulled down a bit to better match Waxer and Boil, and he also loses the painted aspect of his facial scar.  Cody included his removable helmet, as well as a DC-15C blaster rifle.

MACE WINDU

Windu is honestly the weirdest choice in this set, since he only has a small role at the beginning and end of “Innocents,” with the primary Jedi being Obi-Wan.  While Windu wraps up the Ryloth Trilogy in the next episode, it’s without Waxer, Boil, and Cody.  I’d wager that the main reason he was chosen over Kenobi is that he was the rarer figure at the time, and Hasbro wanted collectors to get another shot.  Worked out for me, since I didn’t have a Windu.  The figure stands 3 3/4 inches tall and he has 14 points of articulation.  For whatever reason, the initial Jedi for this line weren’t given full articulation, so Mace lacks any sort of knee or ankle movement.  It definitely cuts down on the crazy action poses.  Despite the reduced articulation, his sculpt is actually pretty solid.  It’s a decent translation of the animation model, and fits in well with the rest of the line.  His paintwork is pretty minimal, with just a lot of browns for the most part.  For whatever reason, his eyebrows went from dark brown on the single to an orange here, which looks a little off, but really only if you closely examine him.  It honestly reads as him just not having eyebrows most of the time.  Windu included his lightsaber, plus a helmet, collar, and shoulder pads to give him some clone armor.  He also includes a spring-loaded waist joint, which gives him a sort of a slashing feature when you pull it back.  Yay?

THE ME HALF OF THE EQUATION

With “Innocents” being my favorite episode of the show, you’d think that this set would have been on my list from day one, right?  I mean, I got the high-end Sideshow set, right?  Yeah, well this pack wasn’t anywhere near as easily gotten as the Sideshow figures, so I actually didn’t have them.  In fact, for the longest time, I just passed off my generic 212th trooper as one of them.  It wasn’t until the set got traded into All Time a couple of weeks ago that I finally had my chance, and while they may have been a little pricey, I kind of counted them as a birthday present to myself.  Expensive as they may be, I really like the Waxer and Boil included here, and I’m happy to have finally gotten them.  It’s just too bad we never got a Numa to go with them.

Advertisements

#1181: Clone Commander Cody

CLONE COMMANDER CODY

LEGO STAR WARS: CONSTRACTION FIGURES

commcodylego1

Alright, let’s start off week three of the post-Christmas reviews by looking at…something from the same line as yesterday.  It’s like something different, only the exact opposite!  Like yesterday’s review, today’s subject comes from the somewhat contested Star Wars prequel trilogy.  In fact, he’s even the same actor as yesterday’s character, thanks to the wonders of cloning!  Yes, it’s everyone’s favorite clone commander who tried to kill Obi-Wan in Episode III, Clone Commander Cody!

THE FIGURE ITSELF

commcodylego2Commander Cody was another figure from the first assortment of Lego Star Wars: Constraction Figures, released during 2015’s Force Friday event.  Amazingly enough, Cody was the only Storm/Clone Trooper variant available in the first assortment.  The figure is assembled from 82 pieces and, like Jango, stands about 9 1/2 inches tall.  In terms of construction Cody is very similar to Jango, using most of the same basic pieces.  Upon closer inspection, several of the body pieces are clearly designed to be Clone Trooper armor, and it seems they were rather hastily refitted to be Jango’s distinctive Mandalorian togs.  That being the case, a lot of the pieces work a lot better for this guy, and he makes for a more faithful recreation of his on-screen counterpart.  The helmet, while still not as spot-on a recreation like K-2’s head, it’s more complex design makes for a more interesting sculpt than Jango’s.  I personally could still stand to have a little more detail present, but I definitely like this one.  Of the three Constraction figures I’ve looked at so far, Cody has the best paintwork by far.  Not only is the white and orange nice and vibrant, but he’s also got a ton of great detail work, especially on the torso.  There’s some fantastic weathering going on here.  Cody includes his larger blaster rifle, which is a surprisingly good recreation of the rifle seen in the movies.  That’s it.  No action feature for this guy.

THE ME HALF OF THE EQUATION

Like Jango, Cody was a Christmas present from Super Awesome Girlfriend’s parents, picked up during the same Walgreens sale.  Cody’s not my first choice of Clone Commander (Rex would be first, followed closely by Gree), but he’s not a bad character, and I’d be more inclined to pick him up than Jango.  The end result is definitely a superior figure to Jango, and probably one of the better Constraction figures Lego’s put out.  K-2’s still my favorite, but this guy’s a solid follow-up!