Tag Archives: Deadpool

#1802: Deadpool

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DEADPOOL

MARVEL LEGENDS (HASBRO)

“So I didn’t make the cut for the school super-mutant team — so what?  I’m my own yellow-clad, spandex-wearing, most popular-girl-in-school cheerleader.  My mom would be so proud.”

Why settle for just one Deadpool variant when you could just as easily have two?  That would be totally ridiculous…again…man, I gotta work on diversifying my phrasing.  Or get way worse at it and just start actually repeating reviews in their entirety.  Admittedly, that second one would be way easier on me…which is why I totally am going with that first one, because why would I go with the easier thing?

THE FIGURE ITSELF

Deadpool is figure 2 in the Sauron Series of Marvel Legends.  Numerically, he’s the first of the two Deadpool variants.  He’s based on one of the handful of times that Deadpool was attempting to join the X-Men by way of showing up in one of their uniforms.  This one’s kind of at the mid point between the not all that comical variation of Cyclops’ Astonishing suit and the really quite ridiculous short-skirted Marvel Girl costume.  It’s a fairly distinctive look, and it’s also not too far removed from the X-jersey look he sports for part of Deadpool 2’s run-time.  The figure stands 6 1/4 inches tall and he has 34 points of articulation.  This variation of Deadpool follows the model of the First Appearance Deadpool from the last series, putting Wade on the 2099 body.  It’s actually a pretty reasonable choice for him, and it’s honestly a shame they couldn’t have just been building him on this body from the beginning.  Those butterfly joints definitely come in handy for him.  He gets the head and shoulder harness from the Juggernaut Deadpool, the belt from the X-Force Deadpool, and the wrist and leg straps from the Jim Lee Cyclops.  It’s overall a decent selection of pieces, and they work well enough, but there are some slight compatibility issues, since all of the pieces were originally intended for the Bucky Cap body, and the fit isn’t quite the same.  The head’s the biggest issue, since the necks between the two bodies are slightly different lengths, so it sits a little bit too high on the head.  What’s weird is that all of the prototype shots for this figure were using the 1st App head, which was actually sculpted for this body and as such would be a better fit.  Not sure why they made the change for production.  It’s not terrible, but it’s a little off.  This figure’s paintwork is pretty decent stuff overall.  He’s certainly bright and colorful and the application is all quite clean.  Deadpool is packed with a pair of katanas, a large rifle, and the head of Madcap.  The Madcap head is definitely the most intriguing…he’s quite a minor character and not one I ever imagined having a figure of.  Now we’ve just got…his head?  No body to go with it, but I guess it looks reasonable enough when placed on this body.  He’s also packed with the tail of the Sauron Build-A-Figure.

THE ME HALF OF THE EQUATION

Of the two Deadpool variants in this series, this is admittedly the somewhat less exciting of the two, and in addition the one with the slightly lesser execution as well.  That being said, if you’re a Deadpool fan, this is certainly still a pretty solid figure, and feels like less of a waste than some of the major character variants we’ve gotten in the past.

Like casual Deadpool and Lady Deadpool before him, this figure belongs to my friend Max from All Time, with whom I split this case.  If you’d like one of your own, He’s still available through All Time’s store.  And if you’re interested in buying other Legends figures, or are looking for other cool toys both old and new, please check out their website and their eBay Store.

#1800: Lady Deadpool

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

LADY DEADPOOL

MARVEL LEGENDS (HASBRO)

“Also known as Lady-D, Wanda Wilson suits up as Lady Deadpool and takes fighting the power to new heights…no really, look how high her ponytail is.”

In 2010, Deadpool was really hitting the height of his popularity.  And the best way to cash in on that sort of things is spin-offs, so we got the Deadpool Corps, a whole team of Deadpool offshoots.  Perhaps the most successful of the bunch was Wanda Wilson, better known as Lady Deadpool.  As such, it’s not a huge surprise that Wanda ended up as the first of them to get a Legends release as well!

THE FIGURE ITSELF

Lady Deadpool is figure 4 in the Sauron Series of Marvel Legends.  Unlike the others, there’s no doubt whatsoever about her Deadpool ties.  Lady D was only really had the one look, a take on Wade’s standard costume from the time of her introduction.  The figure stands 6 inches tall and she has 27 points of articulation.  Lady D is using a body that’s a little bit Frankensteined.  She’s got the arms and legs of Phoenix, and the upper torso and feet of Dark Phoenix.  Not sure why that particular combo was chosen, but there it is.  If I’m honest, I think I’d have preferred a re-use of the recently introduced Psylocke body, since it’s got better motion on the arms, and the legs aren’t quite as skinny, but ultimately this works out pretty well for her.  There’s one minor flaw with this sample, though; she’s got two right feet!  They’re the flat-footed ones, so it was actually quite hard to tell until close examination.  And she’s an off-shoot of a Rob Leifeld character, so she’s really lucky to have any feet at all!  Lady D gets a new head, as well as add-ons for her harness, belt, and thigh pouches.  They’re all pretty nicely sculpted, and the head in particular is a very nice offering.  I like the slight dynamic flair to the hair, and the slightly askew nature of the eyes.  The add-on pieces are all decent as well, though, like with yesterday’s Bishop figure, I find myself wishing the thigh pouches were more fixed in place.  Unlike more recent Deadpools, Lady D’s wrist and ankle straps are painted, rather than sculpted.  Obviously, sculpted is always preferred, but if something was just going to be painted, these will do.  Speaking of paint, Lady D’s is pretty decent overall.  There are a few traces of slop on the edges of the black sections of her costume, but she’s otherwise quite clean, and she uses the same brighter red as the casual Deadpool.  Lady D is packed with a pair of katanas, though curiously she has nowhere to keep them when they aren’t in her hands.  The various Deadpools have all gotten sheaths on their backs for such things, so it’s off that Wanda didn’t.  On a more exciting front, she’s also packed with an extra head, but not just any extra head!  It’s Headpool, all that remains of the Deadpool from the Marvel Zombies universe, and a fellow member of the Deadpool Corps!  He’s actually pretty cool, with an articulated propeller on the top of his head, and a flight stand for easy display.  And, if you’re not into the whole disembodied thing, he can also be popped onto a standard DP body (the First Appearance figure from the last series would probably be the best match, but I don’t own that one, so he’s on the Marvel Now body in my shot).  Lastly, she includes the right leg of the Build-A-Figure Sauron.

THE ME HALF OF THE EQUATION

Lady Deadpool, and the whole of the Deadpool Corps really, was introduced right around the time I hit my saturation point for all things Deadpool.  That being the case, I don’t have a huge attachment to the character.  That said, I do have attachments to good action figures, and Lady D is a pretty solid one.  Yes, I wish they’d used a slightly more posable body, and yes I wish they hadn’t skipped out on the sheaths for her swords, but the overall figure is good enough to outweigh those issues in my book.

Like the casual Deadpool figure, this one belongs to my friend Max from All Time, who I split the case with.  If you’d like one of your own, she’s still available through All Time’s store.  And if you’re interested in buying other Legends figures, or are looking for other cool toys both old and new, please check out their website and their eBay Store.

#1798: Deadpool

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DEADPOOL

MARVEL LEGENDS (HASBRO)

 

“La-la-la-la—oh, hi there.  Been here long?  What’s this? What am I wearing?  Well, this pretty little number is a look I like to all “Deadpool and Chill.””

You can’t have a Deadpool themed set of Marvel Legends without Deadpool, can you?  Of course not!  That would be totally ridiculous!  So, let’s review this here Deadpool figure!

THE FIGURE ITSELF

Deadpool is figure 1 in the Sauron Series of Marvel Legends.  He’s the first of the three specifically Deadpool-themed figures in this assortment.  He’s the third Deadpool figure released this year.  This figure’s look is quite a unique one; rather than just being a standard take or specific version of his costume, it’s a slight variation of a prior costume.  It takes his Marvel Now costume like we saw on the Juggernaut Series release, and makes Wade…a little more comfortable.  It’s a goofy, irreverent sort of look, which makes a ton of sense for a character like Deadpool, though it’s admittedly slightly unexpected to see a figure in his boxers on regular retail shelves.  The figure stands 6 1/4 inches and he has 30 points of articulation.  Like the standard Marvel Now Deadpool and X-Force Deadpool, he’s built on the Bucky Cap body. He re-uses the forearms, hands, and belt from MN Deadpool, along with all-new pieces for the head, and lower half.  The new head has Wade’s mask pulled up to show his mouth and nose.  It matches up correctly with both the masked and unmasked heads from the last figure, which is certainly a plus.  The new lower section is definitely the star attraction here.  The detail work is definitely top-notch.  I particularly love the fuzzy slippers on his feet, especially the way he only has one sock on underneath of them.  That’s a fun little character touch.  The paint work on this figure is alright, though not without some issues.  The biggest issue is the slop on the edges of the black sections of his costume.  It makes him look rather messy and unprofessional as is, and its one of the sloppiest instances of paint I’ve seen on a Legend in a little while.  The other issue, which is an exceedingly minor one, is that his red is a completely different shade than the one used for the MN Deadpool.  If I’m honest, I’m more frustrated that Hasbro didn’t just use this color from the start than I am that they changed mid-run.  The big downside is that you can’t swap the heads between the two versions like I’d hoped you’d be able to.  Deadpool is packed with two different guns, which are the same ones included with Domino, but in black.  I like these guns well enough, though this does cause an issue with the re-used belt.  Since he doesn’t include the same pistol as the last time, there’s not actually a gun that fits in his holster, so it’s going to be permanently empty.  That kind of sucks.  He also includes the torso and head of the Sauron Build-A-Figure.

THE ME HALF OF THE EQUATION

Obviously, there’s not much competing with the Juggernaut Series release for the role of definitive Deadpool, but with these specifically Deadpool-themed assortments, a Deadpool or two is needed.  I like that Hasbro’s going with the angle of amusing variants, rather than a bunch of boring minor variations.  There’s a lot of fun to be had with this figure.  Sure, he’s got some minor issues, but he’s enough fun that you don’t really notice.

This Deadpool figure isn’t actually mine; I split this set with my friend Max from over at All Time Toys.  He was kind enough to lend me his half of the set to review alongside my half.  If you’d like one of your own, he’s still available through All Time’s story.  If you’re interested in buying other Legends figures, or are looking for other cool toys both old and new, please check out their website and their eBay Store.

#1693: X-Force Deadpool

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

X-FORCE DEADPOOL

MARVEL LEGENDS (HASBRO)

“Need someone to do the dirty work? Great news: that’s his favorite kind of work.”

This spring has been jam-packed when it comes to big blockbusters.  Wedged in-between event-film-10-years-in-the-making that was Infinity War and the decidedly-smaller-scale-but-base-breaking Solo, was the somewhat quieter, more laid back Deadpool 2.  I was apparently one of the few people on the planet not terribly thrilled by the first one, so I wasn’t expecting much from the sequel, but I actually rather liked it.  As a Fox-produced film, it’s got no direct merchandise from Hasbro, but it did get an assortment of loosely themed Marvel Legends.  There were two variants of the title character included, and I’ll be looking at one of those today.

THE FIGURE ITSELF

X-Force Deadpool is numerically the first figure in the Sasquatch Series of Marvel Legends.  A quite similar figure was released earlier, as an exclusive to HasCon 2017.  While the main figures are similar, they are not identical, and the accessory complements are completely different.  Both figures are based on Deadpool’s more monochromatic look from the pages of Uncanny X-Force, which is coincidentally quite similar to how Wade looks after taking a fair bit of damage in the final act of Deadpool 2.  The figure stands 6 1/4 inches tall and has 32 points of articulation. On the outside, the figure’s doesn’t seem all that different from the one released two years ago in the Juggernaut Series, but he’s actually more different than you might think.  They share the same base body (the Bucky Cap), and the same head.  They also share the same shoulder harness and thigh holster.  Beyond that, he gets a new belt, wristbands, and ankle bands.  They succeed in making the figure moderately different, and by extension, more accurate to the original source material than a simple recolor would have been.  Even the paint masking is a bit different, and not just a simple palette swap.  The shaping of the black sections of his costume are actually the inverses of the last figure’s, which is another point in the accuracy column.  Sadly, Deadpool’s accessories have been stepped way back from both the HasCon offering of this costume and the prior standard release.  Still, he does get the swords, the rail gun, and the pistol (both painted in a fun blue color that makes them look vaguely Nerf-ish), and he also comes with the head of Sasquatch.

THE ME HALF OF THE EQUATION

I had no real intent to pick up this figure.  I have the standard colors version from 2016, and I figured that was good enough.  Then I ended up with every other figure from the set, and I saw DP2, and I found myself kind of wanting this figure.  Sadly, by that point he’d sold out pretty much everywhere.  I eventually found him on Amazon for base retail, and here we are.  He’s a surprisingly enjoyable figure, and I’m happy I tracked him down.

#1077: Deadpool

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DEADPOOL

MARVEL LEGENDS SERIES

deadpoolhas2

Just a few weeks ago, I took a look at most of the latest set of X-Men-themed Marvel Legends.  I got all of the figures necessary to complete the build-a-figure, but there was still one more figure I didn’t have at the time, so he didn’t get reviewed.  But now I’ve got the figure, so why not give it a review?

It’s worth noting that I run hot and cold with Deadpool.  I was never really into him in the ‘90s, since he was still sort of being formed at the time.  I had a few of his figures from the old X-Force line, and they were cool and all.  I was actually pretty into the character around the time of Ultimate Alliance (where he was one of my favorite characters to play), and picked up a couple of his comic book runs over the years. Then he sort of did the Wolverine thing and became really really popular really really fast, and certain parts of the character got more exaggerated, and they happened to be the parts I was a little less fond of.  But, you can’t deny he’s a popular guy, and his latest Legend seems somewhat over due.

THE FIGURE ITSELF

deadpoolhas3Deadpool is the last figure in the Juggernaut series of Marvel Legends. He’s the only figure in the set not to include a piece of the unstoppable guy, which was probably a good idea, since it allows Deadpool fans to buy just the one figure without getting the random piece and it allows fans wanting to complete Juggernaut to not have to worry about tracking down what is undoubtedly the most popular figure in the series.  Deadpool has sported more or less the same design for most of his 25-year career, but there have been a number of minor changes here and there over the years.  This figure is based on the character’s most recent Marvel Now! look.  It’s a pretty good design, offering fans without prior Deadpool figures a basic Deadpool, while also offering something new for the older collectors.  The figure is 6 1/4 inches tall and he has 32 deadpoolhas4points of articulation.  Wade is built on the Bucky Cap body, which is a good fit for him.  He has a unique head, forearms, hands, shins and feet, as well as add-ons for his harness, belt, and thigh holster.  The new pieces blend well with the base body, and they offer a lot of really fun character-specific elements, from the slightly askew eyes, to the pinky-out trigger finger.  Clearly a lot of fun was had sculpting this guy.  Though he’s built on one of the most common base-bodies in the Hasbro stock, he actually feels incredibly unique.  Deadpool’s paintwork is pretty standard Legends faire, but it’s worth noting that, like the rest of this series, the application is a lot cleaner than some of Hasbro’s prior attempts.  Hands down, the best thing about this figure is the accessory selection.  Since he doesn’t have a B-a-F piece, Hasbro’s made sure to pack him with a full arsenal, which includes two pistols, a large machine gun, a smaller machine gun, two katanas, a knife, and a rocket launcher (with a boxing glove at the end, because why not).  He also includes an extra unmasked head, and most amusingly, a taco.  Combine that with Spider-Man’s pizza, and the Legends are starting to get some nice food options.

THE ME HALF OF THE EQUATION

I had sort of resigned not to find this guy, since he was the most sought after figure in an already very sought after set of figures, and I didn’t need him to finish Juggernaut.  After finding Rogue and writing all of the reviews, I figured I was done with this series.  A couple days after the Juggernaut review went live, I was moving into my new apartment, and my parents had stopped by a nearby Walmart to pick up a few necessities.  When they arrived at the apartment, this guy was also in the bag, which was a nice pleasant surprise.  Despite my mixed feelings about the current state of the character, this is a really awesome figure, and caps off what is perhaps the best series of Hasbro’s run with Legends, if not the best series of Legends period.

deadpoolhas5