Tag Archives: Diamond Select Toys

#1603: Killmonger & Klaue

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

KILLMONGER & ULYSSES KLAUE

MARVEL MINIMATES

Black Panther’s impressive supporting cast did the film a lot of favors.  While my personal favorites were amongst his allies, there’s no denying that the antagonistic side was pretty strong, too.  We not only got the returning ball of fun that was Klaue, but also one of the most fully-crafted of the MCU’s villains in Erik Killmonger.  What luck that the Minimates went and paired those two!

THE FIGURES THEMSELVES

Killmonger and Klaue are the other shared two-pack in the Black Panther assortment of Marvel Minimates, though, unlike yesterday’s set, these two are only available in two-pack form, either from Toys R Us or Walgreens.  There’s a close but slightly different Killmonger in the specialty-exclusive four-pack.

KILLMONGER

This Killmonger uses the Black Panther-styled design that most of the figures are going with.  It wasn’t his main design, but it’s the one he wears during the final battle, and the one with all the parallels to T’Challa, so I suppose it makes sense.  The figure stands 2 1/4 inches tall and he has 14 points of articulation.  Construction-wise, Killmonger’s got the same exact set-up as Panther, with an add-on for the mask and the clawed hands.  The suits are meant to be very similar, so this is definitely a sensible re-use.  The main tweak here is the paint, which is slightly more involved than T’Challa’s was, thanks to all the leopard print and everything.  It looks pretty solid all-around, though I do feel I should note that my figure’s face is printed off-set to the right on the mask.  Under the mask, there’s another face, depicting a pretty solid (and somewhat angry) Michael B Jordan.  Killmonger includes a new hairpiece to show off this unmasked look, as well as the usual clear display stand.

ULYSSES KLAUE

Klaue was fortunate enough to have already gotten an MCU-‘mate, thanks to his Age of Ultron appearance.  But, that was back when he had two real arms, and a Klaue with two real arms is hardly Klaue.  The figure gets add-ons for his hair, vest, and sleeve cuffs, as well as a brand-new left forearm.  The hair and vest both look to be new to this particular figure (though the vest is already slated for re-use with the Series 75 Luke Cage) and both do an okay job capturing Klaue’s look.  The hair does seem a little hat-like, but it’s not awful.  The sleeves are the same pieces that have been in use since The Spirit, and they work just as well here as anywhere.  The new left arm is definitely awesome, and adds a nice bit of unique flair to what could have been a bland guy in a suit.  Klaue’s paint is reasonable enough, though not terribly exciting.  The Serkis likeness here is about on par with the last one, just with a more excited expression, which certainly befits the character.  There’s some slight slop around the mouth, making it look like Klaue’s just had a glass of milk or something, but he’s otherwise fairly clean.  Klaue is packed with an alternate left arm with his hand in compact form and a clear display stand.

THE  ME HALF OF THE EQUATION

As with yesterday’s set, I grabbed these guys while taking advantage of Walgreens’ sale on Minimates.  I had initially just planned to grab the two exclusive sets, but I liked the look of these two in person.  While neither of them is really my favorite from the assortment, or even necessarily  my favorite version of either character, both are definitely strong figures.

#1602: Black Panther & M’Baku

Posted by Ethan Wilson in Reviews and tagged with , , , ,

BLACK PANTHER & M’BAKU

MARVEL MINIMATES

Black Panther was not at all hurting for merchandise, which is certainly a good thing, since it was a pretty darn awesome movie.  And I like having action figures from awesome movies, so that all works out pretty well for me.  Minimates are usually the best way to get the largest cross-section of characters from any given property, and that’s definitely the case here.  So, without further ado, I present the first in a week of Black Panther Minimates reviews, starting off with Black Panther and M’Baku!

THE FIGURES THEMSELVES

This pair is one of the shared sets for this whole assortment.  They’re available in two-pack form from both Toys R Us and Walgreens, and also in the specialty-exclusive four-pack.  For the sake of posterity, this particular set came from Walgreens.

BLACK PANTHER

T’Challa’s actually not as frequent a Minimate as you might think, though this movie has certainly changed that.  This particular version marks his fourth time in the format, and, unsurprisingly, it’s based on his updated suit from Black Panther.  The figure stands about 2 1/4 inches tall and he has 14 points of articulation.  For his non-basic parts, he’s got an add-on for his mask, as well as Cheetah’s clawed hands.  The claws are definitely a welcome addition, as their absence from the Series 66 version was really my only major complaint.  The paint on Panther is pretty solid work.  Detail lines do a nice job of capturing all of the intricate details of the costume from the movie.  I like the use of the dark blue for the base body so that the details stand out.  Under the mask, there’s a new Chadwick Boseman likeness, and it’s a marked improvement from the Civil War version.  The expression is fairly neutral, but avoids being too bland.  Panther is packed with an extra hair piece to display his unmasked look, as well as the standard clear display stand.

M’BAKU

M’Baku was perhaps my favorite character in the film, thanks in no small part to Winston Duke injecting a lot of life into what could have been a rather two-dimensional character.  His absence from most of the figure lines is understandable (I mean, he’s only got, what, 15 minutes of screen time?), but still somewhat disappointing.  The Minimate is currently the only figure version available, and he’s based on his garb from the film’s climax, which is a sensible choice (though a challenge two-pack of him and T’Challa might be a fun exclusive).  He’s got add-on pieces for his hair, torso armor, and skirt piece.  All three of these are new to this figure, and they’re decent enough.  The armor’s a little bit on the restrictive side, but not a bad piece overall.  M’Baku’s paintwork is solid, if maybe not super exciting.  Nevertheless, the likeness on the face is definitely a good match, and the more intricate work on the wrist bracers and the shins is really awesome.  M’Baku is packed with his staff and the usual display stand.

THE ME HALF OF THE EQUATION

I’ve been debating whether or not to pick up this pair.  Obviously, I wanted both of them (M’Baku in particular), but I was initially going to holdout for the four-pack, but then Walgreens was running a buy-one-get-one-50%-off sale, and I’d otherwise have ended up with an odd number of sets.  Both figures here are pretty solid additions to the line.  And, hey, where else are you going to find an M’Baku figure?

#1597: Poncho & Cloaked Unmasked Predator

Posted by Ethan Wilson in Reviews and tagged with , , ,

PONCHO & CLOAKED UNMASKED PREDATOR

PREDATOR MINIMATES

One of the best things about the original Predator was Arnold “Dutch” Schwarzenegger’s mercenary team.  They’re sort of like the uber macho man equivalent to the Colonial Marines from Aliens, a memorable pack of characters whose sole purpose is to make the alien look scary and tough when it kills them all.  Unfortunately, since Predator’s still mostly a Schwarzenegger vehicle, most of the merchandise tends to focus on him.  Thankfully, we have Minimates to swoop in and save the day, though, and it’s through that channel that we’ve been able to almost complete the team.  Today, I’m looking at my personal favorite member of the squad, Poncho, as well as another Predator variant.

THE FIGURES THEMSELVES

Poncho and the Cloaked Unmasked Predator were released as part of the specialty assortment of Series 4 of Predator Minimates.  The Cloaked Unmasked Predator was packed with both Poncho and Anna, Poncho being the 3-per-case heavy packed figure, and Anna being the 1-per-case chase.

PONCHO

“Jorge ‘Poncho’ Ramirez was a member of Dutch Shaefer’s rescue team, and was able to speak fluent Spanish with prisoner Anna.”

Poncho is kind of a big deal, because he’s the last main member of Dutch’s squad to make into ‘mate format.  It’s fitting, really, since he’s <SPOILERS!> also the last member of his squad to get picked off in the movie.  Though not as bombastic as some of his squad-mates, Poncho’s always been my favorite because of his dry wit and slightly reserved nature.  The figure stands about 2 1/4 inches tall and he has 14 points of articulation.  He’s built on the basic ‘mate body, with add-ons for his hat/hair, tactical vest, belt, holster, and sheath.  Poncho’s add-on pieces are completely re-used parts, with the hat coming from Series 1’s Dillon, the belt being shared with his fellow mercs, the vast coming from Marvel Series 55’s Batroc, and his holster and sheath being standard parts.  Apart from his hair texture not quite matching with the movie (a very minor flaw, mind you), the re-used parts work very well, and do a solid job of replicating his design from the film.  Poncho’s paintwork is pretty solid as well.  The likeness of Richard Chaves is definitely there on the face, and the general work is all quite clean and sharp.  Poncho is packed with his HK94A3, Desert Eagle, knife, and a clear display stand.  It’s a little sad that the “explosives expert” doesn’t actually come with any explosives, but it’s a decent selection nonetheless.

CLOAKED UNMASKED PREDATOR

“A standard piece of equipment for any Yautja hunter is a full-body cloaking device, which renders the Predator all but invisible to human eyes.”

Remember when I reviewed the standard Jungle Hunter?  And his battle-damaged counterpart?  Well, this guy is the same as those two, just molded in clear plastic.  Woo.  In all honesty, he’s really not a bad ‘mate.  They actually printed all of his detail lines in white, which is certainly a nice touch.  As with the other Jungle Predators, his only accessory is a clear display stand.

THE ME HALF OF THE EQUATION

I picked these two up during Luke’s Toy Store’s Black Friday sale.  I kept meaning to pick this one up, what with Poncho being my favorite and all.  He’s pretty cool, no doubt about that.  I can’t say I’m super thrilled about the Predator variant I had to purchase to get him, but at least I didn’t have to contend with the blind bags.  Now I kind of want the rest of the team.

FIQ Friday Fab Five at 5 #0002: Top 5 Spider-Man Figures

Posted by Ethan Wilson in Friday Fab 5 and tagged with , , , ,

What’s up FiQ-fans!  It’s the last Friday of the month, so that means it’s time for another FiQ Friday Fab Five at 5!  For my inaugural FFFF@5, I looked at the top five figures of DC’s number one hero, Batman.  Today, I’m flipping over to Marvel and their top hero, Spider-Man, and taking a look at the top 5 Spider-Men.  Obviously, this list is just confined to Peter’s classic red and blue number; the symbiote really deserves a list all its own!

#5:      Battle-Ravaged Spider-Man — Spider-Man Classics (Toy Biz)

Okay, admittedly, this guy’s not *technically* a standard Spidey.  But, let’s be honest with ourselves, Peter takes damage often enough that this might as well be as standard look.  2002’s Marvel Legends-prototype Spider-Man Classics gave us a handful of awesome Spider-Men in its short two series run, but I always felt this Battle-Ravaged variant really stood out from the pack.  In fact, up until very recently, he was the only Classics Spider-Man in my collection.

#4:      Spider-Man — Marvel Minimates (Diamond Select Toys)

Sometimes you get things right on your first try.  The first Spider-Man Minimate is definitely one of those times.  While later Spider-Mates have offered more accessories and greater detailing, it’s hard to beat this guy and all his simplistic glory.

#3:      Super-Poseable Spider-Man — Spider-Man: The Animated Series (Toy Biz)

Spider-Man’s a character that needs to be super-poseable to fully do him justice.  Early offerings from Toy Biz were decidedly more restricted in their mobility, so this Series 3 addition to the line put them all to shame.  Even two decades later, he’s still a pretty solid contender.  And, bonus points: he was my first Spider-Man figure!

#2:      Pizza Spider-Man — Marvel Legends Infinite Series (Hasbro)

There’s no shortage of really great Spider-Men in this particular scale, but there’s just something about Hasbro’s most recent update, affectionately called Pizza Spidey based on his rather amusing accessory slice of pizza, that just seems to get the character down pat.  The poseablity, the bright colors, and a selection of expressive interchangeable hands all make for a really fun figure that feels very true to the character.

#1:      18-inch Spider-Man — Spider-Man 2 (Toy Biz)

At 18 inches tall, this is definitely a monster of a figure.  He had the misfortune of hitting at a time when there weren’t many other figures available in this scale, but even as a standalone figure, he’s downright amazing.  Toy Biz took advantage of the larger scale to make him the most detailed and by far the most articulated version of the character ever made in figure form.  He carries a hefty after-market price tag for a very good reason.

#1573: Iron Man, Hawkeye, Thor, & Grim Reaper

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

IRON MAN, HAWKEYE, THOR, & GRIM REAPER

MARVEL MINIMATES

“Iron Man, Thor and Hawkeye are just three of the Heroes who make up the super-team known as the Avengers. Together, they can neutralize any threat, even the manipulations of the evil Grim Reaper!”

I just mentioned Minimates passingly in yesterday’s Palz review, so I suppose it’s fitting that today I give them a whole focus of their own.  Because, as we all know, Minimates neeeever show up in my review schedule, right?  …Anyway, getting back to the Minimates, Disney’s acquisition of Marvel in 2009 left a little bit of uncertainty about the future of Marvel Minimates and whether DST would be allowed to continue as a licensee.  Disney assuaged fears by turning around a couple of Disney Store exclusives, sort of out of nowhere one day.  I’m looking at one of those exclusives today.

THE FIGURES THEMSELVES

This set was released in May of 2012 as one of two Disney Store-exclusive boxed sets meant to tie-in with the release of the first Avengers movie (I already took a look at the other one here).  Iron Man and Thor are both the same figures as their Marvel Minimates Series 44 counterparts, while Hawkeye and Grim Reaper were exclusive to this set.

IRON MAN

The mid ‘90s marked a bit of a resurgence for Tony Stark as Iron Man (albeit nowhere near as big as the one he got in ’08), with fan favorite Kurt Busiek handling the character both in his solo book and in the pages of the re-launched Avengers title.  This figure represents the design he was wearing at that time, and it’s a favorite of mine. The figure is 2 1/2 inches tall and he has the usual 14 points of articulation.  He has add-ons for his helmet, breast plate/shoulder pads, gloves, belt, and boots.  All of these were new to this figure, and they all are pretty fantastic.  There’s a ton of sculpted detail on each piece, but he maintains the ‘mate aesthetic very well.  As far as paint goes, this Iron Man is generally pretty solid, but is definitely an example of DST’s learning curve with metallic paints.  While the reds are really great looking, the gold is still that very dark, very dull shade they were using for a while, and it’s also worth noting that it’s a paint that doesn’t hold up to time.  It’s not as bad as the Avengers #1 set’s version of Tony, but it’s pretty frustrating.  Even more frustrating is DST’s decision to package Tony’s helmet on him.  For most Iron Man ‘mates (at least leading up to this), the helmet would be packed off to the side.  The reason for this is simple: if the paint hasn’t fully dried when the figure is packaged and you stick the helmet on there, it’s likely not coming off.  That’s what happened with my figure.  Seriously, six years I’ve owned this guy, and I’ve yet to get that helmet off him.  It’s a little sad.  Guess it’s a good thing I like the fully armored look.  Iron Man was packed with a rocket trail flying stand, done in a nice pale blue.

HAWKEYE

Before this figure, there had been only one other standard Clint Barton Hawkeye (reviewed here), four years prior.  That figure had some notable issues, and really looked out of place with all of the other advancements going on.  So, he was due for an update, and the extra notoriety given to him by the first Avengers movie granted him that chance.  Plus, as a pivotal player in Busiek’s Avengers re-launch, his inclusion alongside the otherwise very clearly Heroes Return-branded ‘mates in this set and Series 44 made a lot of sense.  I’ve actually looked at a lot of this figure before, via the Best Of Marvel Minimates Series 3 release, which took it’s add-ons from this guy.  I liked the pieces there, and I liked them here first.  The only real difference between the two is paint.  And paint’s kind of what breaks this figure for me.  It’s not terrible.  It’s actually pretty decent, even.  That being said, if the Series 20 Hawkeye was too subdued, this one went too far the other way, making him way too bright.  It’s the blue in particular that throws him off.  It should definitely be a deeper tone (which the later release definitely fixed).  Another thing I’ve never much liked about this figure is his facial expression. I’m glad they got the face to line up correctly (since the first Hawkeye did not), but the angry, gritted teeth look just doesn’t feel right for Barton.  Hawkeye included his bow, three pointed arrows, two sonic arrows, and a hairpiece for his unmasked look.  The arrows were nice, and can even be placed in his quiver.  The bow, which was a new sculpt, was okay at the time, but was definitely on the small side, and a little hard for him to hold properly.

THOR

Though he was the most glaring omission from the line for its first 15 series, by the time of this Thor’s release, we were kind of suffering from a glut of Thors, with this one being the ninth Thor in the space of a year.  Like Iron Man, this Thor was definitely patterned on the Heroes Return look, which is really just the classic design plus a beard.  Thor was built using add-ons for his helmet/hair, cape, wrist bands, belt, and boots.  The wrist bands were from the very first Thor in Series 16, the cape and boots came from the TRU-exclusive First Appearance Thor from 2011, and the belt was just a generic piece.  The helmet was new, though you’d be forgiven for not realizing.  Overall, a solid set of parts, though the cape does make it a little hard to keep him standing.  The rest of the look is achieved via paint.  I think it’s pretty good overall, though there’s some slight slop here and there, especially noticeable on the helmet and the cape.  He used the same gold paint as Iron Man, which isn’t super, but there’s less of it on Thor.  Thor included his hammer Mjonir, in both standard AND spinning configurations.  I quite like the spinning version.  He also had an extra head sans-beard, which, despite using the exact same facial features as the bearded head, ends up looking a bit too mean for Thor.  There’s also a spare hairpiece for a look without the helmet, I suppose to offer people who only knew the movie Thor a more familiar look.  Lastly, he included a clear display stand to help him stay standing with the spinning Mjolnir.  It’s important to note that these still weren’t a standard inclusion yet.

GRIM REAPER

Last up, the set’s one new character, Grim Reaper!  Reaper has been a long-recurring Avengers villain, and he was revived during the Busiek/Perez run, so he’s a perfect fit…well, apart from the total lack of Vision or Wonder Man in the set, but hey, I’ll take what I can get.  They went with the classic Reaper design (classic, not original, because no body really wants the technicolor dreamcoat monstrosity that was his first costume), which is sensible enough.  I’m still partial to his re-animated look from the ‘80s, but this works too.  The figure makes use of add-ons for his mask, cape, and scythe attachment.  The mask and scythe were new to this figure (and remain unique to this figure six years later), and were fantastic renditions of his look from the comics.  The cape is the standard cape from the DC Minimates Series 1 Superman.  It’s not a perfect fit (since Reaper’s really supposed to have the collar), but it’s close enough that it works.  In terms of paint, Reaper is certainly subdued, but very well-rendered.  The colors are suitably dark, but there’s still plenty of room for detailing.  I love the dynamic shading on the bodysuit and mask.  I also really love that crazed expression they gave him.  Reaper included no accessories, but I don’t really know what you’d give him.

THE ME HALF OF THE EQUATION

I grabbed this set at the same time as its companion set, ordering them both from Disney’s online store (since none of my local Disney Stores ever carried Minimates).  Reaper’s always been a favorite of mine, so his inclusion definitely excited me, but I was also pretty happy to get another Hawkeye.  While Hawkeye didn’t end up being quit what I wanted, I was still pretty happy with the other three in this set.  In fact, this was my preferred of the two Disney sets.

#1566: Colonel James Rhodes & Air Assault Drone

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

COLONEL JAMES RHODES & AIR ASSAULT DRONE

MARVEL MINIMATES

Since Minimates do make up a rather sizable portion of my collection, they sort of are a regular fixture around these parts.  Some sets are awesome.  Some are less so.  Today, I look at one of the latter category.  That seems a bit harsh now that I’ve typed it out, but, well, you’ll see.

THE FIGURES THEMSELVES

Colonel Rhodes and the Air Assault Drone were from the second TRU-exclusive series of Iron Man 2-based Marvel Minimates.  Rhodey is unique to this set, while the Air Assault Drone was re-packed from the single-packed army builder assortment.

COLONEL JAMES RHODES

“A dedicated Lt. Colonel and patriotic member of the US military, James Rhodes’s testimony before Senator Stern’s committee forces Tony Stark to call his friend’s true loyalties into question.”

Iron Man 2 was pretty good for our pal Rhodey here.  Prior to the movie, he’d made two appearances as a Minimate, but IM2 gave us four new ones.  This one’s…probably the least exciting when you get right down to it.  Still, Rhodey spends a decent enough chunk of the movie in this uniform, so it’s not the worst inclusion, I suppose.  The figure stands 2 1/4 inches tall and has 14 points of articulation.  He’s built on the usual body, with an add-on for his jacket, borrowed from Series 22’s General Ross.  It’s a reasonable piece.  It’s not a perfect match for Rhodey’s uniform from the movie, but it’s close enough to warrant the re-use.  The paint work on Rhodey is respectable.  It’s all pretty cleanly applied, and the blue is fairly bright. The head is a match for the one that was under the War Machine ‘mate’s helmet.  While it’s not particularly strong Cheadle likeness, at least they went for some consistency.  Rhodey included no accessories, which is a bit of a bummer.  Not even a file folder or a clipboard or something?

AIR ASSAULT DRONE

“Specifically designed for aerial maneuvering and atmospheric combat conditions, a handful of these advanced Black Drones are capable of destroying entire squadrons of traditional fighter jets.”

After the slight mis-lead of the Series 35 Hammer Drone, we finally get one of the proper ones.  Woo!  This one’s dubbed the “Air Assault Drone” on all of the merchandising, because due to licensing things, it couldn’t be called the Air Force Drone.  This particular ‘mate makes use of a lot of the same pieces from the first Hammer Drone, but with a new head, hands, and a backpack glued onto the chest piece.  The ew pieces fit in well with the previously existing ones, and he makes for a pretty faithful recreation of the Drones from the movie.  The paint’s not super thrilling or anything, being mostly dark grey with just a small bit of white accenting.  But, I suppose it matches the movie.  Once again, no accessories for the Drone, but it’s slightly more forgivable given all of the sculpted add-ons.

THE ME HALF OF THE EQUATION

I picked this set up new from Toys R Us.  I didn’t go out searching for them or anything, I just came across them one day and I guess I had a moment of weakness.  If I recall correctly, I even put of opening them for a good several months, just due to a general lack of excitement.  Neither ‘mate in this set is bad.  They both check all of the boxes, and there are no glaring issues (well, except perhaps for the lack of any extras), but neither is really anything to write home about.  This pair really feels like DST just needed two fill two slots as easily as possible.  I suppose it’s fitting that a set of mediocre Minimates were based on Iron Man 2.

#1559: Transforming Thing & Herald Silver Surfer

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

TRANSFORMING THING & HERALD SILVER SURFER

MARVEL MINIMATES

After quite a bit of time of having to start every Fantastic Four-based review with a woeful intro about how the team has fallen out of focus, it’s kind of nice to be able to see the light at the end of the tunnel.  In case you aren’t up to date on the comics world, the Fantastic Four, or half of them anyway, are finally making their grand resurgence at Marvel, thanks to the recently launched revival of Marvel Two-In-One.  The book served as a showcase for FF member Ben Grimm in the ‘70s and ‘80s, pairing him off with other heroes from Marvel’s rather impressive stable of characters.  The re-launch once again focuses on Ben, but also brings in fellow FFer Johnny Storm, and is hopefully serving as a prelude to a full-fledged Fantastic Four relaunch.  Anyway, in honor of Ben’s return to comic-star-dom, how about looking at one of his figures?

THE FIGURES THEMSELVES

This pair was released in the 15th Toys R Us-exclusive series of Marvel Minimates.  The set was pulling double duty, with Ben meant to go with Series 48 of the main line (which was an all FF-themed assortment), and the Surfer augmenting the TRU-exclusive “Heralds of Galactus” set.

TRANSFORMING THING

“Pilot Ben Grimm first turned into the Thing after being bathed in cosmic radiation, and his skin was transformed into orange rock. He has since reverted to human form several times, but rarely for very long.”

This was the Thing’s twelfth (and, to date, last) time as a Minimate.  This one’s based on his John Byrne designed Negative Zone costume.  Ben actually had a few different costume variants under Byrne, and I think Minimates have covered them all.  This is the one that sticks the closest to the classic design, just being the usual shorts.  The figure stands about 2 1/2 inches tall and has either 14 or 12 points of articulation, depending on which way you have him configured.  Just how to handled Ben’s bulky build on the Minimate frame has been the source of much experimenting on DST’s part.  This one is a lot like the recent Hulks and such, being a standard ‘mate body, with a rather extensive selection of add-on pieces.  He’s got a head piece, chest cap, upper arm and leg covers, a pelvis cap, and unique hands and feet.  The head piece goes all the way back to the very first Thing ‘mate from Series 5, and most of the other pieces come from the first really bulked up Thing from Series 37.  The only new pieces here are the hands.  The last two Thing hands hadn’t really fit well with the new bulked up pieces, so these newer parts looked much better.  The bulked up look for Thing has always seemed maybe a touch too large for me, but I don’t think it looks horrible, and there’s no denying that there’s some really great detail work going on.  In terms of paint, Ben’s rather on the simple side…at first glance.  The detailing on the face is really good, of course, and I particularly like that they went with a calm expression.  One can only have so many screaming Ben Grimms.  The shade of orange used is one of my favorites, but it’s bright enough that he looks a little weird without any other sort of detailing on the rocks.  Some sort of black outline would have been cool.  As it stands, he still looks fine, but his face stands out quite a bit.  Under all of the add-on pieces, there’s actually a fully detailed second figure!  Yes, with the help of a spare head/hair, pelvis, hands, and feet, you can transform Ben back into his old human self.  The detailing on this underlying figure is pretty great, and it’s awesome that we got this option.

HERALD SILVER SURFER

The Surfer hasn’t been quite so lucky with ‘mates as Ben, with this one only being his third (and, again, his last to date).  I suppose it’s hard to do too much new with a guy whose design has remained essentially identical for 50 years.  From a sculpting standpoint, there’s not much to say about this guy.  He’s just the standard body, as he should be.  Painted details are really where it’s at, and Diamond has done a pretty awesome job of conveying the Surfer’s cosmic shininess.  The first Surfer was more abstract, and the second perhaps a bit too heavy on the details.  This one went for a Goldilocks approach to detailing and gave us a Surfer whose detail paint was just right.  I also appreciate the slightly more intense expression on this guy, since the last two went more stoic.  The Surfer was packed with his signature surfboard, as well as two energy effects for his hands, a portal effect to plug onto the back of his board, and a flight stand.  It all adds up to easily the most exciting looking of the three Silver Surfer ‘mates.

THE ME HALF OF THE EQUATION

I got Series 48 before these guys showed up, and that was one of my favorite assortments of Marvel Minimates pretty much ever.  So, I knew I was tracking this set down to complete my team.  At the time, I wasn’t particularly keen about getting another variant of the Surfer, but he was sort of along for the ride.  When I finally tracked this set down, I ended up loving it just as much as the Series 48 guys, and both figures included are hands down my definitive versions of the characters.

#1557: Ellen Ripley

Posted by Ethan Wilson in Reviews and tagged with , , ,

ELLEN RIPLEY

VINIMATES (DIAMOND SELECT TOYS)

“After surviving the xenomorph attack that killed her crewmates, Ellen Ripley was found and awoken years in the future to learn that the discovery site of the lifeform, planet LV-426, had since been colonized. Joining a military expedition to the planet, Ripley knew that even a single xenomorph would pose a danger to the entire colony, and if any escaped the planet, they could threaten the galaxy.”

Hey, while we’re on the topic of competitors to Funko Pop!, why not take a look over at Diamond Select’s stab at the world of collectible vinyl figures, Vinimates!  My Vinimates collection is modestly plugging along, and so far is only made up of figures just from my favorite properties.  Of course, I’d so far missed my all time favorite movie, Aliens.  Let’s fix that.

THE FIGURE ITSELF

Ellen Ripley was released in August of 2016, as one of the two Aliens-themed Vinimates (the other being the Alien Warrior).  Like the first proper Ripley ‘mate, this one’s based on her hive-storming look from the end of the movie.  It’s a distinct look, so it’s a good choice.  She stands about 4 1/2 inches tall and she has an articulated neck (a ball-joint, just like the others in the line).  Ripley’s sculpt is, of course, all-new to her.  It’s notably divergent from the smaller-scale take on this same design.  The hair should, in theory, be a little closer to Weaver’s from the movie, since it’s a new piece rather than a straight re-use, but I personally find it to be too close cropped for her hair.  It’s not terrible, though.  She’s posed hunched over, like she is while she explores the hive, holding her combo pulse rifle/flamethrower.  It’s a good look, and pretty standard for this particular look.    Her paint work is decent enough.  The base colors are pretty good matches for the movie, and the application is mostly clean, though there are some fuzzy lines.  The face is a decent enough likeness of Sigourney Weaver, though it’s kind of funny that her eyebrows aren’t filled in.  I would assume that’s not an intentional change, though.

THE ME HALF OF THE EQUATION

I kept meaning to pick up Ripley, ever since she was released, but I just sort of kept forgetting.  Admittedly, Vinimates are not usually at the top of my priority list.  I ended up finally getting her because she was marked way down during Luke’s Toy Store’s Black Friday sale, and that was enough to prompt me.  She’s decent enough, though I don’t know that she’s quite as exciting as the other two.

#1545: Shanna the She-Devil & Savage Land Reaper

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SHANNA THE SHE-DEVIL & SAVAGE LAND REAPER

MARVEL MINIMATES

One the cooler, yet sadly under-used, aspects of the X-Men universe is the Savage Land, a secret tropical area located within Antartica.  It’s a fairly standard hidden land sort of idea, and the X-Men have a tendency to find themselves stranded there every 20 years or so.  Because, honestly, what’s cooler than watching your favorite heroes duking it out with actual dinosaurs?  Very little.  While the typical “lead” in any given Savage Land story is Ka-Zar (Marvel’s answer to Tarzan), in recent years, the breakaway character has actually been his frequent co-star (and eventual wife) Shanna the She-Devil, who, interestingly enough, was actually imported to the Savage Land after she and the location had both been established.  She and her pack-mate the Savage Land Reaper became the first residents of the Savage Land to make it into DST’s Marvel Minimates line back in 2013.

THE FIGURES THEMSELVES

Shanna and the Reaper were released in Series 51 of Marvel Minimates.  The whole series was themed around Marvel’s then-current “Marvel Now!” relaunch.  Shanna was serving as a major player in the Savage Wolverine title, so she found herself in this assortment, with the Wolverine that went with her being packed into the 15th TRU-exclusive assortment released at the same time.  Both figures were packed with a Savage Land Reaper, which served somewhat as an army builder.

SHANNA THE SHE-DEVIL

“Shanna O’Hara is a former Olympic athlete and a licensed veterinarian, and she has made the Savage Land her adopted home. Her fierce hatred of firearms arose from the accidental shooting death of her mother.”

Shanna gained some additional notoriety in the early 00s when Frank Cho helmed a heavily cheesecake-driven solo series featuring the character.  It was actually an alternate universe Shanna, with very little connection to the real character, but it served to elevate her somewhat in the public eye, and it was successful enough for Cho to be able to work her main universe counterpart in when he launched Savage Wolverine.  This figure draws her look from that series, meaning she’s kind of an amalgam of the two Shannas.  She’s built on the standard ‘mate body, meaning she stands about 2 1/4 inches tall and she has 14 points of articulation (though the hair restricts a lot of the neck movement).  She has add-ons for her hair and her belt/loincloth, both of which were new to this particular figure.  The hair’s a little bulky for my taste, but it’s not terrible.  The belt piece is actually pretty nice, and I particularly like the the sheath for her knife.  In terms of paintwork, Shanna’s okay, but she certainly leans far heavier on the Frank Cho alternate universe side of things.  Her hair’s straight blond, rather than the starwberry blond the 616 version’s supposed to have.  She’s also wearing a far more revealing bikini, which is perhaps not the most flattering thing on a block figure.  Ultimately, she looks okay, but I can’t say it’s my ideal take on the character.  She’s packed with a knife (to go in that cool sheath on the belt), a spear, and a clear display stand.

SAVAGE LAND REAPER

“In the Savage Land, the skies are owned by the Reapers, giant pterodactyls who resemble X-Men villain Sauron. When the attack Wolverine and Shanna, they quickly learn that the pair are not easy prey.”

Originally, this ‘mate didn’t just resemble Sauron, it actually was him.  When 51 was originally solicited, the Reaper was just called Sauron, despite being based on the more generic group of pterodactyl men from Savage Wolverine.  A number of people brought up the various design differences between them, and ultimately this figure was re-labeled.  24 Series later, the real Sauron still hasn’t made an appearance.  Poor guy.  This figure starts with the same basic body as Shanna, but gets a unique head, hands, and lower legs, as well as add-ons for his wings and tail.  The new pieces help to sell him as one of the Reapers, without removing him too much from the usual Minimate aesthetic.  His paint is mostly just a lot of the same shade of green, but it’s appropriate for the character, and the detail lines are all pretty decent.  The Reaper is packed with a clear display stand, specially molded to fit his slightly smaller than average feet.

THE ME HALF OF THE EQUATION

When Series 51 was released, I was in the habit of ordering full cases of the latest series, so that’s what I did here.  While this wasn’t a set I was dying to have, I like both characters (or at least the characters that inspired both characters) enough to want them on my shelf. Both ‘mates are decent additions to the line, but neither is particularly thrilling.

#1533: Daredevil

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

DAREDEVIL

LEGENDARY MARVEL SUPER HEROES (DST)

For my second day of post-Christmas reviews, I get to look back on things I’ve forgotten.  Namely, the line today’s figure came from, Legendary Marvel Super Heroes.  The line is Diamond Select Toys’ continuation of the Mego-stylings seen in the World’s Greatest Super Heroes toy line of the 1970s, launched back in 2015.  I looked that the first two figures, Spider-Man and Captain America, back when they were new, and I was quite supportive of the line, and very much looking forward to its future offerings.  And then…I sort of forgot about it.  I feel a bit bad about that.  I blame Hasbro releasing 3 million Marvel Legends that I have to buy every year.  It takes up a lot of my time.  Anyway, today, I’m finally returning to Legendary Marvel Super Heroes, with a look at a character who never got a proper Mego back in the day, Daredevil!

THE FIGURE ITSELF

Daredevil was the sixth figure in DST’s Legendary Marvel Super Heroes, released in mid-2016, between Deadpool and Punisher.  As with the rest of the figures in this line, he was built on the same standard body, which a slight re-fitting of Mego’s Type II body, with minor adjustments by Paul “Dr. Mego” Clarke.  The figure stands about 8 inches tall and he has 16 points of articulation.  Like the other figures in this line, Daredevil is essentially three figures in one, with only the base body shared between the three.  If you have any standard Mego bodies lying around, or even prior figures from this line, you can display all three looks as separate figures.  For the purposes of my review, I’ve supplied two extras from my own collection.

The first of the three included looks is DD’s “vintage” design.  This is the one that’s meant to come as close to a legit Mego figure as possible.  The difference between DD and the last two I looked at is that, as a character with no actual vintage counterpart, DST and crew have had to come up with a figure that mimics the stylings of the old figures, a task at which they’ve very much succeeded.  By far the best part of this look is the head sculpt, which captures the classic DD design perfectly, while also preserving that Mego charm.  By modern standards, he looks a bit dated, but that’s sort of the idea, now isn’t it?  This is a head that will look completely at home next to the likes of Cap and Spidey.  The paint on the head is fairly simple, but it’s bold and the application is very clean, which looks pretty fantastic.  DD has a red bodysuit, which has been tailored to match the classic Mego one piece suits.  It’s got some pleather cuffs for the gloves, which feels appropriately vintage.  My only real complaint here is about the logo, which is very hard to see.  A higher contrast would have looked nicer, I think.  There’s a separate pair of red shorts overtop, which are definitely goofy, but also totally true to the ’70s version of the character.  As far as molded pieces go, he’s got a fairly standard set of red boots, as well as belt with a pleather holder for his billy club.  Said billy club is molded in bright red and can be popped apart at the middle.  He also includes an extra right hand with a more formed grip.  It’s nice to have the option, but it sort of doesn’t feel right to me, since it goes against the vintage Mego look where they all had the same hands.

The second costumed look for both Cap and Spidey was an updated version of the classic costume, but for DD they’ve opted to go for a totally different look, since just another version of the red costume might be a little bit drab.  So, instead, he gets a slightly modernized take on his original yellow costume.  As an unabashed fan of the Yellow Daredevil design, I’m definitely happy this costume made it into the set.  Where both Cap and Spidey got an all-new masked head for their second costume, DD’s is the same head, just painted in the appropriate colors.  The sculpt is strong enough that I don’t mind, and in fact I think it’d just be frustrating if they gave us a different head sculpt here, since the two would then never match.  This costume also gets the same belt and holster as the first one, just in a darker brown this time.  The actual costume is far more involved.  There’s a yellow body suit, which is slightly tighter to the body and also includes more of a collar to better hide the underlying body at the neck.  There’s an additional pleather unitard that goes overtop, which is also tightly tailored to the body, and features a much more obvious insignia.  He gets a set of far more detailed boots, modeled after those worn by a boxer (fitting, given his background) as well as new hands in fists.  He also gets the gripping right hand, as well as a billy club in brown.

The last look in the set is Daredevil’s alter-ego, Matt Murdock.  He gets an unmasked head sculpt, which looks to use the same starting point as the masked heads.  It’s okay, but I’m not sure it works quite as well as just the basic masked head.  It’s got some very clean paintwork, so that’s nice.  Matt’s seen here wearing a suit, which was patterned off the classic Mego suits seen on Clark Kent and the like.  It’s rather baggy and more than a little goofy, but it fits the style and, if nothing else, it’s easy to get on the body.  He also includes a set of sunglasses (which stay on much better than the glasses included in the Spider-Man set), as well as standard flesh tone hands, an extra gripping right hand, his briefcase, and his cane.

Also included in this set is a booklet detailing the process of getting this figure made, as well as giving a detailed account of DD’s history in both toys and comics.  It was certainly an entertaining read, just like the other two I’ve gotten.

THE ME HALF OF THE EQUATION

Daredevil was given to me by my parents as a Christmas gift this year.  He’s a figure I kept meaning to get, but I just kept getting side-tracked.  When playing with my Dad’s Mego collection as a kid, Daredevil’s absence definitely bugged me, so getting this figure definitely feels nice.  The standard look is definitely my favorite of the three, but I like them all.  Given his uniqueness, I think this set offers a bit more value than the last two I looked at, but I’m still a little bit frustrated that only one body is included, especially since one of my spares broke while I was shooting the photos for this set.  Nevertheless, this is a fun set for sure, and essential for any Mego fan’s collection.