Tag Archives: Iron Man 2

#2827: Black Widow & James Rhodes in Mark II Armor

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

BLACK WIDOW & JAMES RHODES IN MARK II ARMOR

MARVEL MINIMATES

In light of Black Widow finally getting her long overdue solo film over this weekend, it’s always kind of interesting to look back at her beginnings, at least in terms of the MCU.In addition to introducing Widow, Iron Man 2 helped to set the stage for the larger MCU as a whole.  As such it was a film rather jam-packed with characters, each with a number of distinct looks.  The corresponding Minimates were quite all-encompassing, with the specialty and TRU assortments each pulling their weight to get as many of the primary players out there as possible.  It was through this venture that Widow got her first MCU-based ‘mate, alongside a variant of Rhodey.

THE FIGURES THEMSELVES

Black Widow and James Rhodes in Mark II Armor were part of the first TRU assortment of IM2 tie-ins for Marvel Minimates, which hit just before the film’s release in the spring of 2010.Both figures included here were totally exclusive to this pack-out, and would remain that way going forward.

BLACK WIDOW

Though her role in the finished product ended up a little smaller than some were anticipating, Widow is still one of the most important things to come out of Iron Man 2.  She had a pair of movie-based Minimates to come out of it.  This one is the first, and the one based on her actual, proper “Black Widow” design. The figure is built on the standard ‘mate body, so she’s about 2 1/4 inches tall and she has 14 points of articulation, Widow is markedly less sculpted than her pack-mate, but she still makes use of a handful of sculpted add-ons for her hair, widow’s stingers, and belt/holster. The hair piece was shared with the other Widow variant, and is a very well-detailed, exceptionally crafted recreation of Widow’s longer locks from the film.  The widow’s stingers are the same ones used on the Champions boxed set Widow.  They were good there and they’re just as good here.  The combined belt/holster piece is the only truly unique piece on this figure.  It accurately recreates what she was wearing in the film, but its design means it restricts the hip movement on the left leg, which is a little annoying.  That said, it’s far less obtrusive than earlier holster designs, which is a plus.  The paintwork on Widow is pretty decent stuff.  The face has a passable likeness of Scarlet Johansson.  Not the best DST’s done on the MCU Widow’s but certainly a good start.  The expression’s a little bland, though it’s hardly the end of the world. The detailing on her uniform is pretty solid stuff, with linework for all the piping.  She’s even got the SHIELD insignias on her shoulders; the proper classic ones from IM2, as opposed to the more Ultimate inspired one from later films.  Widow’s only accessory is a small handgun, which was in common usage around that time.  It’s a fine piece, but she does feel a little light.

JAMES RHODES IN MARK II ARMOR

There were no shortage of Rhodey figures in the IM2 assortments.  He got quite a bit of focus in the movie, and his three main looks were each represented.  His time in the unmodified Mark II armor is short-lived, but it is during one of the film’s best sequences, so its place in this assortment is certainly earned. The IM2 armored figures represent DST’s learning curve with sculpting on ‘mates.  These guys lost a lot of the connection to the base body, which makes them feel sort of alien amongst the other ‘mates.  Structurally, this figure is identical to Series 35’s Iron Man Mark IV.  Same helmet, torso, upper arms, gloves, and legs.  In turn, this means he shares his gloves and legs with the Marks II and III from Series 21.  This figure was *supposed* to also share his torso piece with those two, but due to a mix-up he ended up with the Mark IV piece, which is inaccurate to the film.  It’s not a huge difference, but it’s enough to be frustrating.  Paint on the Mark II is all rather basic.  He’s mostly just a straight silver, with detailing on the eyes and arc reactor, as well as a fully detailed James Rhodes face under the helmet (the same one on both the standard War Machine and the Uniformed Rhodes) and a look into the inner workings of the suit on the underlying torso block.  It’s pretty decent work overall, but it’s unfortunate that he doesn’t have the same rivets detailing that was present on the first Mark II Minimate. The Mark II is packed with a spare helmet with the face-plate flipped up.  It’s the same piece used for the other armors in this same assortment, and it’s a really cool idea.

THE ME HALF OF THE EQUATION

I snagged this set from TRU when it first hit. I was quite determined to get it, because I really wanted this Black Widow. Fortunately, it didn’t prove to hard for me to get, so that was nice. Widow was undoubtedly the star attraction of this particular set.  While she’s been outpaced by more recent variants, there’s still a lot to like about this figure. Rhodey in the Mark II armor is a variant that would have been pretty cool if the execution had been there.  Unfortunately, it really wasn’t, and as such, the figure ends up rather underwhelming.  Fortunately, he’s got his pack-mate to carry him.

#2108: Senate Hearing Tony Stark & Mark I Iron Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SENATE HEARING TONY STARK & MARK I IRON MAN

MARVEL MINIMATES

Though the first Iron Man got a pretty solid coverage of Minimates, by the time of Iron Man 2, the brand had moved to new heights and reached new audiences, and was just much larger in general.  The IM2 assortments had to pull double-duty, covering not only Iron Man 2, but also playing some slight catch-up on the first film for new fans.  Today’s set follows that, giving us new versions of the suited Tony Stark and his original Mark I armor.

THE FIGURES THEMSELVES

This pair was released in the first TRU-tie-in assortment of Marvel Minimates for Iron Man 2, alongside the more outwardly new Black Widow and Mark II pairing.

SENATE HEARING TONY STARK

Tony’s irreverent performance at the Senate hearing was heavily featured in the trailers leading up to IM2’s release.  As such, the appearance of his attire from that scene in this line wasn’t a huge shock.  Tony uses add-ons for his hair, jacket, and tie.  All three of these were re-used.  The hair is from the first film’s Tony, which is a good fit.  The jacket is from the “World of the Psychic” Peter Venkman; this was its first re-use, but it’s gone on to become a very common-place item.  Lastly, there’s the tie, re-purposed from the Spirit boxed set.  Again, the first re-use of many.  The willingness to use these new pieces, especially the sculpted tie, adds some quality to the figure that might have otherwise been missing.  The paintwork on Tony is pretty decent.  The big, goony grin on his face is certainly unique, and adds an extra bit of character to this particular figure.  There’s some impressive work on the pelvis piece, as well, delivering details that weren’t commonplace at the time.  They’re certainly appreciated here.  Perhaps the only other thing I’d have liked to see would be proper detailing under the tie on the torso, but that’s a minor flaw.  Tony included no accessories.  I can’t say I can think of what could have been included, though, so I can’t really hold it against him.

MARK I IRON MAN

The Mark I armor was one of the first Iron Man assortment’s real gems (really, only rivaled by Iron Monger), and he was also extraordinarily heavy on essentially one-off parts, so a re-release was warranted.  Like the first Mark I, he uses sculped add-ons for his helmet, chest plate, upper arm and leg armor, gauntlets, and boots.  The pieces are some of the finest sculpting from the line, especially from the period in which they appeared.  They were great the first time around, and this figure is the same.  The paint on the armor this time is somewhat changed.  It’s less silver and more of a gunmetal grey, with more wear and tear.  It loses some of the other colors, which is a shame, but it overall feels a lot more accurate, and differentiates the figure more than you might think.  What differentiates the figure most, however, isn’t what’s on the surface, but rather what’s under it.  The original Mark I gave us a pretty awesome captive Tony.  Through use of a spare hair piece, hands, and jacket, this one loosely replicates Tony’s entrance at the beginning of IM2, giving us Tony in a tux.  Sure, he was wearing it under the Mark IV in the movie, but this is still really cool.

THE ME HALF OF THE EQUATION

I found these new, and I was definitely more interested in the other exclusive two pack at the time, but there’s no denying that this one is a lot better than anyone expected.  Senate Hearing Tony’s not an essential figure by any means.  He certainly could have been drab and boring, had DST just phoned him in.  Fortunately, they didn’t, resulting in a pretty nifty little ‘mate.  This Mark I could have been a simple retread of the original release, but he gets a lot of added value from the alternate look.

#1566: Colonel James Rhodes & Air Assault Drone

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

COLONEL JAMES RHODES & AIR ASSAULT DRONE

MARVEL MINIMATES

Since Minimates do make up a rather sizable portion of my collection, they sort of are a regular fixture around these parts.  Some sets are awesome.  Some are less so.  Today, I look at one of the latter category.  That seems a bit harsh now that I’ve typed it out, but, well, you’ll see.

THE FIGURES THEMSELVES

Colonel Rhodes and the Air Assault Drone were from the second TRU-exclusive series of Iron Man 2-based Marvel Minimates.  Rhodey is unique to this set, while the Air Assault Drone was re-packed from the single-packed army builder assortment.

COLONEL JAMES RHODES

“A dedicated Lt. Colonel and patriotic member of the US military, James Rhodes’s testimony before Senator Stern’s committee forces Tony Stark to call his friend’s true loyalties into question.”

Iron Man 2 was pretty good for our pal Rhodey here.  Prior to the movie, he’d made two appearances as a Minimate, but IM2 gave us four new ones.  This one’s…probably the least exciting when you get right down to it.  Still, Rhodey spends a decent enough chunk of the movie in this uniform, so it’s not the worst inclusion, I suppose.  The figure stands 2 1/4 inches tall and has 14 points of articulation.  He’s built on the usual body, with an add-on for his jacket, borrowed from Series 22’s General Ross.  It’s a reasonable piece.  It’s not a perfect match for Rhodey’s uniform from the movie, but it’s close enough to warrant the re-use.  The paint work on Rhodey is respectable.  It’s all pretty cleanly applied, and the blue is fairly bright. The head is a match for the one that was under the War Machine ‘mate’s helmet.  While it’s not particularly strong Cheadle likeness, at least they went for some consistency.  Rhodey included no accessories, which is a bit of a bummer.  Not even a file folder or a clipboard or something?

AIR ASSAULT DRONE

“Specifically designed for aerial maneuvering and atmospheric combat conditions, a handful of these advanced Black Drones are capable of destroying entire squadrons of traditional fighter jets.”

After the slight mis-lead of the Series 35 Hammer Drone, we finally get one of the proper ones.  Woo!  This one’s dubbed the “Air Assault Drone” on all of the merchandising, because due to licensing things, it couldn’t be called the Air Force Drone.  This particular ‘mate makes use of a lot of the same pieces from the first Hammer Drone, but with a new head, hands, and a backpack glued onto the chest piece.  The ew pieces fit in well with the previously existing ones, and he makes for a pretty faithful recreation of the Drones from the movie.  The paint’s not super thrilling or anything, being mostly dark grey with just a small bit of white accenting.  But, I suppose it matches the movie.  Once again, no accessories for the Drone, but it’s slightly more forgivable given all of the sculpted add-ons.

THE ME HALF OF THE EQUATION

I picked this set up new from Toys R Us.  I didn’t go out searching for them or anything, I just came across them one day and I guess I had a moment of weakness.  If I recall correctly, I even put of opening them for a good several months, just due to a general lack of excitement.  Neither ‘mate in this set is bad.  They both check all of the boxes, and there are no glaring issues (well, except perhaps for the lack of any extras), but neither is really anything to write home about.  This pair really feels like DST just needed two fill two slots as easily as possible.  I suppose it’s fitting that a set of mediocre Minimates were based on Iron Man 2.

#1322: Pepper Potts, Happy Hogan, & Hammer Drones

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

PEPPER POTTS, HAPPY HOGAN, & HAMMER DRONES

MARVEL MINIMATES

I haven’t reviewed Minimates in over a month.  That seems slightly odd.  To be fair, I haven’t actually picked up any new sets since the Doctor Strange assortment, so that probably contributed somewhat.  Since I’m leaning pretty heavily on the back catalog at the moment, it’s only fair that I look back at a small sampling of my rather large Minimate collection.  Today, I’ll be going way back to 2010’s Iron Man 2, with Pepper, Happy, and a pair of Hammer Drones!

THE FIGURES THEMSELVES

Pepper, Happy, and the Hammer Drones were released in Series 35 of the main Marvel Minimates line, which tied-in with the previously mentioned Iron Man 2.  They were the two specialty exclusive sets; Pepper and Happy were each packed with a Hammer Drone, with Pepper being the more heavily packed and Happy as the one-per-case “chase” figure.

PEPPER POTTS

“Tasked with running all of Stark Industries as their new CEO, Pepper Potts must balance her personal friendship with Tony Stark against mounting evidence that the armor-clad hero may be unable to control his own demons.”

Definitely the heaviest-hitteriest-character featured here.  This was Pepper’s second time as a Minimate (her first ‘mate came from the first film).  The figure is a little under 2 1/2 inches tall and has the usual 14 points of articulation.  She’s built on the basic ‘mate body, with add-ons for her hair, skirt, and bracelets.  The skirt was a re-use from the Series 18 Gwen Stacy, and the rest of the add-ons were new to this figure.  I’m not sure exactly which part of the movie she’s from, but her general look is captured.  The end result is decent enough.  Not the most thrilling ‘mate of all time, but she gets the job done, I suppose.  As far as paint goes, she’s fairly bland again, but the colors seem appropriate to the movie, the application is pretty clean, and the Gwenyth Paltrow likeness is decent (certainly better then the first Pepper).  Since this series predates the standard inclusion of display stands, Pepper includes no accessories.  I suppose they could have given here, like, a phone or something, but it’s not a huge deal.

HAPPY HOGAN

“Not only Tony Stark’s bodyguard and chauffeur, Happy Hogan is also one of his closest advisors. As events unfold, however, Happy finds himself torn between his friendship with Tony and his feelings for another…”

Holy abandoned plot-lines Batman!  So, in the initial cut of Iron Man 2, Tony’s driver Harold “Happy” Hogan was supposed to at one point confess his romantic feelings towards Pepper, hinting at their pairing up in the comics.  It was ultimately cut for time, which is, honestly, for the best.  Happy got a greatly increased role in the second film (he doesn’t even get named in the first movie), and so he naturally got a Minimate.  This is, to date, the only action figure of Happy Hogan out there, which is pretty nifty.  Like Pepper, he’s built on the standard base body, plus he’s got add-ons for his hair and jacket.  The hair was new (and a decent enough match for Jon Favreau’s), and the jacket was re-used from Back to the Future’s George McFly.  The end result makes for a decent match-up to Happy’s on-sceen appearance.  The paint is pretty solid, but once again, not anything amazing.  He’s mostly molded in black, with some minor detailing for his shirt/tie, and his face.  The face doesn’t look a ton like Favreau to me, but he *does* look like Happy from the comics, so I don’t mind so much.  On his own, Happy’s another figure that’s not super thrilling.  Fortunately for him, he includes some pretty sweet extras.  He has a pair of boxing gloves (calling back to the boxing scene he has with Tony in the movie), as well as the Mark V in its un-deployed briefcase form, and a pair of handcuffs to hook the briefcase to his wrist.  You’ll need to do some very slight modding if you want one of the cuffs to actually go on the handle of the case, but that’s really the only issue.  Otherwise, it’s a really fun little set-up.

HAMMER DRONES

“Created using a fusion of technologies from Stark Industries, Hammer’s own company and Whiplash’s improvisations – the Hammer Drones are immensely powerful and potentially lethal in the wrong hands.”

That’s a great description…of the other Hammer Drones.  You know, the ones that were actually drones and that played a part in the film’s climax.  These guys?  Not those Hammer Drones.  No, these would be the prototype suits that Vanko scraps early into the film, that get no actual fight time, and aren’t even really drones.  I would guess these guys being in the main assortment instead of the ones that actually featured prominently is yet another example of plans changing in a movie after the reference materials have gone out to the licensees.  Worse things have happened.  At least it’s a decent design, right?  The figure uses the base ‘mate body as a starting point, but gets a non-standard head and thighs, as well as add-ons for the chest piece, gloves, belt, and boots.  The pieces actually make for a pretty cool little toy, though it’s rather far removed from the usual ‘mate aesthetic.  In terms of paint, it’s a lot of grey, but there’s nice work, especially on the little caution sections.  There’s a bit of slop and bleed over here, but nothing too terrible.  Like Pepper, the Hammer Drones include no accessories.

THE ME HALF OF THE EQUATION

Cosmic Comix got gipped on his Series 35 orders, which meant that I missed out on my usual way of getting the specialty exclusives.  I was able to get Pepper from Midtown Comics during a trip to New York that year, but they had already sold Happy by that point.  It took a year or so, but my parents eventually got me one as a Christmas present.  Pepper’s kind of bland and generic, and the Hammer Droids are ultimately rather inconsequential, but Happy is actually a pretty sweet figure!

#1198: Mark V Iron Man & War Machine

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

MARK V IRON MAN & WAR MACHINE

MARVEL MINIMATES

mkvwm1

Ah, Iron Man 2, the one entry in the MCU we all sort of pretend didn’t happen.  The first chink in the armor, if you will.  Admittedly, it’s not a bad movie, just an okay one, hurt by being the sequel to one of the biggest surprise hits of 2008.  Some of the ideas presented there really weren’t bad, and if nothing else, the toys from the movie were cool.  Two of my favorite parts of the movie (and thus some of my favorite entries from the toy lines) were the suitcase armor and Rhodey taking up the War Machine mantle.  The Mark V and War Machine just so happened to be packed together for their Minimates.  How convenient!

THE FIGURES THEMSELVES

The Mark V and War Machine were part of the Iron Man 2-tie-in assortment of Marvel Minimates.  They were one of the pair of two-packs shared between the TRU-exclusive assortment and specialty Series 35 (the other being Mark IV and Whiplash).

MARK V IRON MAN

mkvwm2Though somewhat short-lived, the Mark V suitcase armor was one of the real highlights of IM2, being a fun concept, a fun design, and getting easily the coolest fight scene in the movie.  The figure is about 2 1/4 inches tall and has 14 points of articulation.  The Mark V has add-ons for his helmet, shoulderpads, gloves, boots, and belt.  The helmet is the same piece used for Marks IV, VI, and VII, but aside from that these pieces were new to this guy.  They match up well enough with his on-screen design, and he doesn’t suffer from being overly bulked up like a lot of the Iron Man armors from this time period.  In addition to the add-on pieces, the IM2 ‘mates also ramped up the use of specialized pieces, especially for arms and legs.  The Mark V gets new upper arms and legs, which, like the add-on pieces follow the movie design quite well, and also help to prevent him for getting too big.  The paint on this guy is particularly nice, with the metallic red in particular really standing out as really sleek and polished.  Under his helmet, there’s a nice, angry/determined Tony Stark, who even shows some damage from his battle with Whiplash, making him a nice departure from the slew of other Tonys with the same basic face.  The Mark V was packed with an extra hairpiece (a recolored version of Kyle Reese’s), as well as a pair of flesh-toned hands.

WAR MACHINE

mkvwm4From the moment Rhodey quipped “Next time, baby” to the Mark II in Iron Man, I was anxiously awaiting War Machine’s introduction in the sequel.  Of course, we lost the first Rhodey in the mean time, so there was no “Next time” for that particular iteration of the character.  That being said, I think Cheadle ultimately brought more to the role, and was especially good for the transition of Rhodey to true super hero.  This was Cheadle’s first of several ‘mates.  This one’s particularly heavy on the extra sculpted pieces, with add-ons for the helmet, chest piece, and gloves/forearm guns, as well as unique legs and upper arms.  Pretty much the whole basic ‘mate body is covered when this guy’s armored up.  The parts are generally pretty well sculpted, but I do feel this guy suffers a bit from that overly bulked up look that I mentioned the Mark V avoided.  It’s not awful, nor is it super out of character for War Machine, but he still looks a little on the pudgy side from some angles.  Rhodey’s paint work is decent enough, if not as exciting or polished as the Mark V.  Under the armor, there’s some nice extra torso detailing, as well as a fully detailed Rodey head.  In lieu of the hair piece from the first movie’s Rhodey, this guy’s hair is painted on, which I think more accurately portrays the close-cropped look from the film.  As far as the likeness, I can’t say I see all that much of Cheadle in the face on this one, but it’s still a pretty nice head.  Rhodey included a large gattling gun and missile launcher to plug into his torso piece, as well as a separate helmet with the faceplate flipped up, and a pair of flesh-toned hands.

THE ME HALF OF THE EQUATION

This was around the time I was faithfully buying my Minimates from Cosmic Comix, but for whatever reason, his shipment of these guys never materialized.  I was hardly going to miss out on this pair, so I ended up grabbing them from TRU along with the two TRU-exclusive sets.  I find that a lot of these ‘mates haven’t aged the best, but these two still hold up pretty well, and I’m happy to still have them!

#0048: Iron Man Mark VI – Hologram

Posted by Ethan Wilson in Reviews and tagged with , , , ,

IRON MAN MARK VI – HOLOGRAM

IRON MAN 2 (HASBRO)

So, wacky variants.  They tend to be a staple of action figure lines, particularly those that are based on films and such where the main character might only have one or two looks.  And that’s nowhere near enough for toy makers.  They have to make the kids buy them all!  They reached their heyday back in the 90sm most prevalently with Batman, but they still appear from time to time.

Case in point with today’s figure in question: The Holographic version of Iron Man’s Mark VI armor.  He hails from Hasbro’s tie-in line to 2010’s Iron Man 2.

THE FIGURE ITSELF

The Holographic Mark VI, or HMVI as I’ll be referring to him, was released as part of a K-Mart exclusive three pack of armors.  It featured a War Machine in camo, and an Iron Monger painted to look like the Hulkbuster armor, but I don’t have either of them.  HMVI is not based on a look from the Movie, instead being totally made up so that the toymakers could make another figure out of the same Mark VI mold.  He stands just shy of 4 inches tall and has 18 points of articulation.  The sculpt is exactly the same as that of the basic Mark VI.  The difference is that he was molded in clear blue.  He features some minor paint to give him some kind of a crosshatching detail, which is actually pretty cool.  He features no accessories, which is a bit of a bummer, but since Hasbro has a tendency to just throw in a dumb missile launcher, I don’t feel like I’m missing out on anything.

THE ME HALF OF THE EQUATION

I bought this figure for one and only one reason:  it looked really cool.  And it still does.  Sometimes, you just have to buy a toy because of how awesome it looks.  Perhaps the toy companies are on to something…