#0736: War Machine

WAR MACHINE

MARVEL LEGENDS INFINITE SERIES

Warmachine1

Recently, Hasbro’s been putting a lot of effort into making sure that no Marvel Legends prototype gets left behind, so a decent percentage of just about every new series of the line in the last year has been made up of figures we’ve seen in some capacity before. Most of the time, these figures are comic-based figures who take advantage of movie popularity to get their sales, but today’s figure bucks that trend, actually being a movie-based figure who was salvaged from the scrap heap. So, let’s have a look at War Machine, shall we?

THE FIGURE ITSELF

WarMachine2War Machine is the second to last figure in the Hulkbuster Series of the Avengers Marvel Legends Infinite Series figures. He also has the notoriety of being the only movie-based figure in a series with a movie-based Build-A-Figure, which has caused some people a bit of frustration. This figure was originally supposed to be a part of the third series of the Iron Man 3 Marvel Legends, but that series ended up cancelled. He was meant to be based on the concept drawings for the pre-Iron Patriot War Machine 2.0 armor, but now he gets to be based on the actual armor design from Age of Ultron. Yes, it’s the same design, but now it’s more official, right? The figure stands roughly 6 ¼ inches tall and he has 34 points of articulation (counting the shoulder pads and the mounted gun). Sculpturally, this figure is an almost 100% re-use of the Iron Man 3 Marvel Legends Col. James Rhodes/Iron Patriot figure. Literally the only difference between the two sculpts is the left hand, which was open on the Iron Patriot figure, but is closed here. However, this is one of those cases where re-use is not only warranted, but pretty much necessary for the appropriate look. They’re supposed to be the same armor in-universe. It helps that the Iron Patriot sculpt was a pretty good one, too. The fine detail work is just great, it’s super accurate to the source material, and he has decent proportions to boot. The only real downside to this guy is the mounted gun, which doesn’t get the full mobility of the film version, resulting in it being stuck in a somewhat hard to work with pose. It’s workable, but a little frustrating. The main difference on this guy is that paint job. The Iron Patriot figure was (obviously) in more patriotic colors. This figure returns Rhodey to his more traditional black and grey color scheme for which he’s what he’s more known. It’s not the most exciting color selection of all time, but it’s accurate. Plus, he still has all the small writing and insignias that were seen on Iron Patriot, which is definitely nice to see. Another big difference between this guy and his predecessor is his accessory compliment. In addition to the requisite Hulkbuster piece, War Machine also gets an alternate head with his faceplate up, revealing a pretty decent Don Cheadle likeness.

THE ME HALF OF THE EQUATION

I definitely got this guy for the Hulkbuster piece. There’s no two ways about that. When he was initially announced for the IM3 Legends line-up, I was definitely going to pass. I like the armor design and all, but I find the Iron Patriot color-scheme much more exciting, so that was the figure for me. But, then he got moved to this set and I didn’t really have a choice in the matter. Honestly, he’s a pretty great figure. He’s the same great sculpt, plus he gets that cool new head sculpt, which really makes him work. I don’t regret getting this guy.

WarMachine3

#0735: Valkyrie

VALKYRIE – FEARLESS DEFENDERS

MARVEL LEGENDS INFINITE SERIES

Valkyrie1

One of the cool things about the Marvel Universe is that it actually has a pretty wide range of differing female heroes and villains. They aren’t simply limited to one single type of role, just like their male counterparts. So, a few years ago, when a lot of the interesting female characters got booted out of the spotlight in favor of a near-unending stream of gruff, emotionless women who must compensate for not being as physically strong as their male counterparts, I was a little bummed. Good ol’ Valkyrie here managed to not be totally cast aside, mostly due to already being a somewhat minor character to begin with. She hasn’t really been a focus character or anything, but rumor has it that she’ll be making an appearance in Thor: Ragnarok, which should certainly boost her visibility, at least a little bit!

THE FIGURE ITSELF

Valkyrie2Valkyrie is a part of the Hulkbuster Series (aka series 3) of the Avengers Marvel Legends Infinite Series. She’s listed as Fearless Defenders on the package, a name she shares with Thundra. The name is a much better fit for Valkyrie, given that she’s spent most of her career as a member of The Defenders, and she was in fact a main character in the recent Fearless Defenders comicbook. This figure opts to present Valkyrie in her most recent costume, which she started wearing towards the tail-end of the first volume of Secret Avengers, the same costume used for her Marvel Universe figure. I don’t find the design to be quite as striking as her classic look (I really miss the cape), but it’s a serviceable enough look. The figure stands just over 7 inches tall and has 30 points of articulation. She uses the same She-Hulk base body as Thundra and Hela, which is reasonable, but does have one notable issue: she’s just too tall! Her listed height is 6’3”, which puts her at just an inch taller than Captain America. At this scale, that should be a negligible difference; she certainly shouldn’t tower over the average male the way this figure does. On the other hand, Hasbro does seem to be up-scaling the Asgardians in general for this line, so compared to the most recent Thor figure, for instance, she isn’t quite as out of scale. Maybe the Asgardians have been juicing? Anyway, this figure has the same arms and legs as the other She-Hulk body figures, along with an all-new head and upper and lower torso pieces. The head is very nice piece. She’s got a nice, determined look to her; not as angry as Thundra, but certainly not as laid back as Wasp or even Captain Marvel. The face is much more angular than most female faces, which certainly works well conveying Valkyrie’s Nordic features. The hair is a separate, glued on piece, which is pretty nicely sculpted. The braids actually don’t look too ridiculous, which is always good, and the texturing on the various strands adds some nice dimension. She does have a pretty noticeable seam running along the right side of the hair, which is a bit distracting, but that’s the only real issue. The torso pieces are just a slight tweak on the more generic parts, really. One weird thing I noticed is that she’s got these weird ridges running down her backside; they aren’t present on any other figures using this body type, and I don’t believe they come from the comic design, so I’m not sure what they’re supposed to be. Weird. The collar and ….little circle things (?) are sculpted on, and look pretty good, certainly better than if they’d been painted. She also has an add-on for her belt, which is glued in place. The paintwork on Valkyrie is decent enough. It’s not terribly exciting (that’s kind of true to the comic design too, thought). The colors are pretty good and the transitions are pretty clean, so that’s good. The hair gets a nice warm brown wash to bring out the details. The face is pretty clean, even the eyes; not a huge fan of the bright red lips, but they don’t ruin the figure. Valkyrie includes her trusty sword Dragonfang, which is a little generic, but pretty good, as well as the arm of the Hulkbuster figure.

THE ME HALF OF THE EQUATION

This marks the second time that Valkyrie has made it into the Legends style; her first figure was part of a Fan’s Choice two-pack, which also included an Ed McGuinness-styled Hulk. However, the set wasn’t the easiest to procure and holds a pretty hefty after-market value.  What’s that got to do with this? Well, I missed out on the first Valkyrie, which kinda sucked. So, when this figure was announced, I was pretty excited. I was a little bit down on her at first (since the costume’s not the most exciting thing) but I have to say, the figure’s really grown on me, and I think she might very well be the best single release figure in the series.

#0733: Doctor Strange – Marvel Heroes

DOCTOR STRANGE – MARVEL HEROES

MARVEL LEGENDS INFINITE SERIES

DrStrange1

One does not simply review one or two Marvel Legends figures. Oh, no no. If you’re gonna review Legends, you gotta go all in, do a whole series. At least, that’s what I keep telling myself, anyway. Hey, so, Marvel Legends. Yaaaaay. Today, I’ll be looking at an up and coming player (for the MCU anyway) Doctor Stephen Strange (yes, that’s his real name), the Sorcerer Supreme!

THE FIGURE ITSELF

DrStrange2Doctor Strange is another figure from the recent Hulkbuster series of Avenger Marvel Legends Infinite Series figures. He is officially named “Marvel Heroes,” which he share with series-mate Vision. Still feel it’s a bit generic, but whatever. He is presented here in the look he received not too long before Marvel Now!, which was his primary look until the month this figure was released. Well, they tried to be topical, I guess. Honestly, it had a decent enough run in the comics that it feels worthy of a figure, so I can’t complain. The figure stands about 6 ¼ inches tall and has 32 points of articulation. Sculpturally, he is head-to-toe identical to the Astral Projection Doctor Strange from this year’s SDCC set. That seems sensible, since he’s the same guy and all. I liked the sculpt a lot there, and I continue to like it here. Rather than being molded in clear plastic, the good doctor is now showcased in full color. He’s…well, he’s alright. The paint is actually pretty clean for a Hasbro figure, so that’s good. The red and black looks pretty sharp as a color scheme, even if I do miss the classic blue look a bit. The only real trouble with the paint is the head, which isn’t bad, just kind of…meh. The eyes are definitely the worst part of it; they look just a bit off. If they were better, I think the figure as a whole would be better. Doctor Strange is packed with a pair of the same spell-casting pieces we saw with both Scarlet Witch and his Astral form, but in a nice, muted green this time. They still remain very cool pieces, though they are a little difficult to get seated properly on his wrists. He also includes the left leg of the Hulkbuster, which continues the trend amongst Hulkbuster pieces of being freaking ginormous.

THE ME HALF OF THE EQUATION

Doctor Strange is one of the four figures from this series I was able to grab at Walgreens. I’d actually been looking forward to him a little bit, since the Toy Biz version was always one of my favorite Legends figures. That being said, in-hand he was a little bit of a let-down. I think that’s largely due to having already seen the sculpt on the Astral version, which was aided by not having to rely on the Hasbro paint apps. Compared to that figure, this guy just feels like the inferior figure. Which is a shame, because I think he’s actually pretty well done, just not quite as well done as the last figure.

DrStrange4

#0733: Iron Man – Marvel Now!

IRON MAN – MARVEL NOW!

MARVEL LEGENDS INFINITE SERIES

IMNow1

Well, after looking at a totally new to toys, out of left field character with yesterday’s Thundra review, we jump right on over to a guy who’s had sooooooooooooooo many figures. Yep, it’s another Iron Man. Hey, somebody had to sell this series to retailers, right? Let’s look at the increasingly inaccurately named “Marvel Now! Iron Man.”

THE FIGURE ITSELF

IMNow2Iron Man is actually figure 1 in the latest set of Avengers Marvel Legends Infinite Series figures. He’s also one of the three figures in said series to actually get his own name on the box, but that’s not a huge shock. Hasbro was definitely not going to miss out on the chance to get Iron Man’s name on the box. The figure stands 6 ¼ inches tall and has 31 points of articulation, counting the shoulderpad movement. The hips are a little archaic in motion, and the neck is really loose, but the rest of the movement works very smoothly. Iron Man is seen here in the armor he was wearing at the beginning of the Marvel Now! relaunch from a few years ago. Structurally, this guy is 100% the same sculpt as the Iron Man 2 Mark IV figure. Since the Iron Man book’s primary artist Greg Land lifted his interpretation of the armor pretty much wholesale from the movie design (other artists actually stuck to more visually interesting look of the design sheet, but that’s another thing all together), this seems like a pretty reasonable bit of re-use on Hasbro’s part. The sculpt is certainly well-done, so that’s good. One thing I would note is that the shoulder pads have a tendency to pop off from time to time, so definitely be mindful of that. The paint work on this figure is kind of important, it being a repaint and all. Fortunately, the figure actually delivers quite nicely on that front. The gold parts are all nice and clean, and the changes are very sharp, especially for Hasbro. The various red dots don’t line up with the sculpt (except, obviously, the big central one) but they’re accurate to the design. The arc reactor even has a nice gradient bit going on, which is marred only by the small dash of missing paint at the center. Iron Man gets no accessories for him directly, but he does include the leg of the Hulkbuster, which distracts nicely from the lack of anything else. Seriously, it weighs twice as much as him.

THE ME HALF OF THE EQUATION

After finding four of the seven figures necessary to complete the Hulkbuster at Walgreens, I ended up splitting a full set of the series (courtesy of Big Bad Toy Store) with my dad. I wouldn’t have ever bought this figure if not for the Hulkbuster piece, but he’s actually not that bad. At the very least, the black/gold combo is sufficiently different from all the other Iron Men Hasbro’s given us, so he sticks out a little on the shelf.

IMNow3

#0732: Thundra – Fearless Defenders

THUNDRA – FEARLESS DEFENDERS

MARVEL LEGENDS INFINITE SERIES

Thundra1

While Marvel’s various licensors have been “politely discouraged” from releasing any Fantastic Four-related characters, there comes a point where the character is left-field enough that, despite their relation to the team, it doesn’t really give Fant4stic any real publicity. So, let’s talk about Thundra, member of the future-based Femizons (just go with it). Seriously, how many people would look at Thundra here and go: “Better go see that Fantastic Four movie.” No one. Because people who like Thundra have taste and people that actively wanted to see Fant4stic don’t. There’s next to no overlap, though that’s probably because no one seemed to actually *like* Fant4stic. I’m getting off-topic. Sorry, let’s just look at this here Thundra figure.

THE FIGURE ITSELF

Thundra2Thundra is part of the third series of Avengers Marvel Legends Infinite Series, which is officially dubbed the “Hulkbuster Series.” On the packaging, she is referred to as “Fearless Defenders,” a name she shares with series-mate Valkyrie. Given the two characters sharing the name, I feel like “Lady Liberators” may have been more comic appropriate, but I guess Fearless Defenders is a bit more gender neutral. The figure is a little over 7 inches tall and has 30 points of articulation. Thundra is based on the Red She-Hulk body (which we last saw on the SDCC exclusive Hela). It’s a decent sculpt overall, though the hip joints are still out of date. The body does feel just a touch on the skinny side for Thundra, especially on the legs, but it’s a close enough fit that it’s not a huge issue. She gets an all-new head/hair and hands (though, the hands are shared with Valkyrie). I had initially thought she might share some pieces with the un-released She-Hulk Lyra figure, but a quick look at that figure’s prototype shows that isn’t the case. The head is a pretty good sculpt; it’s nice to see a female facial expression that isn’t just vacant, but I wouldn’t have minded them taking her a bit angrier. The hair is certainly well sculpted and accurate to the source material, but it does render her neck movement essentially inert. In addition to the head and hands, Thundra also gets a new belt piece; it’s a fairly standard piece, which was certainly designed with re-use in mind, but it’s nicely sculpted and it sits well on the figure. Technically, to be properly accurate, Thundra should also get a set of cuffed boots, but a whole new set of shins presumably didn’t cost out for a low-tier character like Thundra. It’s honestly not that distracting in person, and some art for the character shows her this way, so it’s not totally inaccurate. Thundra’s paint work is passable. Most of it is pretty cleanly handled, and the colors are nice and vibrant. The gold lightning bolts on the sides of her legs are surprisingly sharp, which is cool, but they don’t match up with the boots, which is less cool. The “collar” of her shirt would probably look better if it were sculpted instead of painted, but it’s handled well enough, so I really can’t complain. One somewhat perplexing issue with the paint: for some reason, she’s got a bunch of red, right around her left elbow joint. No clue how that got there, but it’s kind of annoying. Thundra was packed with her signature “ball and chain” weapon thingy, which is a little awkward for her to hold, but looks pretty good in the right pose. She also has the Hulkbuster’s left arm, which is almost as big as she is!

THE ME HALF OF THE EQUATION

Like Vision, I came across Thundra here while at a nearby Walgreens. That was certainly a bit of a surprise. I’ve always liked Thundra in the comics, so I was pleased to see she was getting a figure. Sure, she’s not perfect, but it’s literally the only figure of Thundra ever produced, so I’m more willing to cut them some slack.

#0731: Vision – Marvel Heroes

VISION – MARVEL HEROES

MARVEL LEGENDS INFINITE SERIES

VisionNow1

With the exception of the AoU boxed set (which only kind of an honorary entry) it’s been a little while since I’ve looked at any Marvel Legends. That’ll change very quickly. Vision’s been making a pretty big splash recently. Something to do with a movie or something. The character’s renewed popularity reminded us all that we hadn’t gotten an ML Vision since very early in Hasbro’s run, and that one also wasn’t very good. So now there’s a new one! Let’s see how this one turned out.

THE FIGURE ITSELF

VisionNow2Vision is a part of the third series of Avengers Marvel Legends Infinite Series figures, referred to by Hasbro as the “Hulkbuster Series” in reference to the Build-A-Figure. On the package, Vision is officially called “Marvel Heroes,” which may just be the most generic shared name to date. I guess they couldn’t think of any other common traits for Vision and Dr. Strange. The figure stands about 6 inches tall and has 32 points of articulation. Vision is presented here in his Marvel Now! costume (which, it should be noted, is NOT his current costume) most commonly seen in his Avengers A.I. appearances. It’s not too far removed from his classic look and it also has a few elements in common with his movie design, so I can see the appeal of this design. The figure is built on the Bucky Cap body, which is clearly one of Hasbro’s favorites. It’s a good body, and certainly a good fit for the character, so it works. He also gets a pair of hands from the recent “pizza” Spidey, which certainly make more sense than a pair of fists. The cape is the same one we saw on Grim Reaper and Brother Voodoo, and it’s really not one of my favorites. It’s got a strange flow to it and it sticks out way too far in the back. Plus, it doesn’t work for the seamless continuation from the torso that the comic design sports. I really hope they realize how flawed this piece is before it makes its way onto too many other figures. Vision’s one new piece is his head sculpt. It’s passable, but not fantastic. Above all, it just feels a bit too wide. It could certainly be worse, though. The paintwork on the figure is generally pretty decent. The head has some slop going on around the edge of the cowl, which is kind of annoying. From the neck down, it’s much better, with very little bleed over or slop. I do wish the diamond of the logo were a little bigger, but that’s minor. The metallic greens are definitely a highlight, though. Vision’s only extra is the lower torso of the Hulkbuster.

THE ME HALF OF THE EQUATION

In case you hadn’t gleaned from prior Vision reviews, I’m a pretty big fan of the character. So, I was pretty excited to hear he was getting a new Legends figure, even if it was his Now! costume, of which I am only a moderate fan. Most of my Legends buying has been moved online, but I actually found this guy at a Walgreens, which was cool. He then ended up being part of the big “Unboxening” I did a few weeks ago, which was cool. I’d be lying if I said I wasn’t the tiniest bit let down by this figure. He’s not bad, but he lacks the excitement of other figures from the line. I will say my opinion of him did improve immensely once I ditched the cape for a spare of the old Toy Biz one.

VisionNow3

#0726: Captain Rex

CAPTAIN REX

STAR WARS: THE BLACK SERIES

CapRex1

If there’s one upside to the Star Wars prequels, it’s the fact that they allowed for the creation of both of the Clone Wars animated series.  They managed to do impossible things like not suck and be something other than the absolute worst, which the prequels never really got down. The second of the two shows had a heavy focus on the Clone Troopers themselves, and changed them from a faceless legion to a collection of actual characters. One of the central clones in the show was Clone Captain Rex, who ended up becoming one of the show’s most popular characters. He got several figures during the actual Clone Wars toylines, and just before the shift to the Force Awakens stuff, he even made his way into the smaller scale The Black Series line.

THE FIGURE ITSELF

CapRex2Captain Rex was figure #09 in the 2014 series of the 3 ¾ inch Star Wars: The Black Series figures. He was part of the second assortment of figures released that year (the same assortment that gave us Commander Doom, for those interested). The figure is a little over 3 ¾ inches in height and has 24 points of articulation. Rex is based on his design from towards the end of the show, after several improvements had been made to his armor. Unlike other Clone Troopers from the show, Rex never got a full Phase II style helmet, instead opting to stick with a slightly modified Phase I helmet. It’s kind of one of his more unique features, and it’s showcased here. Like Doom, Rex’s figure takes his design from the show and realizes it a bit, so that it can fit in with the other figures from this line. His sculpt does this translation pretty well, retaining most of his defining traits from his show design, while also brining him in line with the “real-life” Clone Troopers. The figure uses the same basic body as the one we saw on Doom. It’s less articulated than I’d like, but it’s a decent sculpt, so I can’t complain too much. He gets a unique helmet, shoulder piece, and “skirt” piece with holsters. The new parts are nice, sharp sculpts, and the helmet in particular has some fantastic fine detail work. Hasbro’s weak link is and always shall be its paint apps. It’s not to say they aren’t trying, mind you. Rex has some phenomenal work. The weird blue eyebrow things on his helmet are really sharp and the 163 (yes, I counted them all) tally marks placed all around his armor are a really cool touch. So, what’s the problem? It’s the base color work again. The areas around the holsters are definitely the worst offenders, with tons of overspray and slop, but all of the base work is pretty darn sloppy, which kind of ruins all the effort that was put into the finer detail work. Rex is packed with a pair of blaster pistols. They’re a bit hard to get into his holsters, but he holds them well enough. Like Doom, the accessories feel a bit light for a figure in the higher-priced line. It couldn’t be that hard to throw in a large blaster or something.

THE ME HALF OF THE EQUATION

Rex here was the second of the two pre-Force Awakens figures I found during my Force Friday travels. I couldn’t pass on Doom, but I didn’t need Rex. Of course, I was with Super Awesome Girlfriend at the time, and she absolutely refuses to let me put a figure back, no matter how many times I say I don’t need it. So, she bought him for me. I can’t say Rex was a figure I was desperately searching for or anything, but I did like the character on the show, and I thought this figure looked pretty cool. I’m glad to have him, because, paint issues aside, he’s actually a pretty great little figure.

#0720: Lifeline

LIFELINE

G.I. JOE: A REAL AMERICAN HERO

LifelineVint1

Despite having quite a high appreciation for G.I. Joe and its many military themed characters, I wouldn’t really consider myself a particularly military-minded person. As such, my favorite figures are very frequently those who deviate a bit more from the military structure of the line. One of my favorite characters from the line is Lifeline, who was one of the team’s medics and happened to be a pacifist, which definitely made him a little different from the rest of the Joes, and gave him a nice bit of contrast.

THE FIGURE ITSELF

LifelineVint2The original Lifeline was released in the 1986 series of Hasbro’s G.I. Joe: A Real American Hero (which, having looked into for the purposes of my review, may well be one of my favorite Series of ARAH. That was a good year). This Lifeline, however, is actually the exclusive Rice Krispies mail-in offer version of the character from 1991. The two are almost identical, but there’s one difference between them that I’ll get to in a moment. Lifeline, like all good G.I. Joes, stand 3 ¾ inches tall and has 14 points of articulation. Lifeline has a sculpt that is very much in line with the rest of his vintage compatriots. Sure, it’s not quite up to modern sensibilities of action figures, and there’s a bit of hokeyness to the sculpt, but it’s certainly a nicely detailed sculpt. Plus, it just has a certain charm to it. Lifeline has a helmet and a pair of sunglasses, so his face is a little hard to see, but what we do see looks nice and friendly, which certainly is befitting of the pacifist medic. So, about that minor change; yeah, Kellogg’s wasn’t super eager to have their mail-away figure sporting a firearm, so, in addition to dropping the original’s included handgun from the accessories list, they also had Hasbro change the figure’s legs to remove the holstered gun on his thigh. The final figure’s legs are shared with the 1985 Frostbite figure. The change isn’t a really big deal, what with the whole pacifist thing mentioned above. The only real issue is that the straps on the figure’s waist, which originally connected to his holster and a pouch on his right leg now just end with the waist piece. It’s a little odd, but admittedly not super obvious unless you’re looking right at it. Lifeline’s paintwork is pretty straightforward; the reds are molded plastic and the whites and silvers are painted on. While my figure sports a little bit of wear from play (that’ll happen to figures from the time before collectors started having the hermetically sealed), the paintwork is overall pretty clean, and I like the “RESCUE” printed on the left leg in particular.  While he may have lost his handgun, the mail-away Lifeline certainly isn’t lacking in terms of accessories. He includes a backpack that looks to double as a transmitter of some sort, as well as a rescue pack, befitting his status as a field medic.

THE ME HALF OF THE EQUATION

My appreciation for Lifeline came a little while after I got into G.I. Joe. He wasn’t amongst the Joes chosen to be updated for the 2000s incarnation of the line, so I had no figure of him, and therefore, no initial knowledge of the character. However, I got to know the character through his comic and cartoon appearances, which is how I came to really appreciate him, even if I didn’t have a figure. This figure is actually a fairly recent acquisition, having been picked up from a cool little store nearby called 2nd Chance Toyz. I didn’t realize until after getting him that he was the mail-in version, but I can’t say I mind, truth be told. Lifeline is very definitely a toy of his time, but I’m glad to have him in my collection.

#0719: Clone Commander Doom

CLONE COMMANDER DOOM

STAR WARS: THE BLACK SERIES

CommanderDoom1

DOOOOOOOOOOOM!!!! Yes it’s DOOOOOOOOOOOOM!!!! So, hey, you know one cool thing about Disney owning both Marvel and Star Wars AND Hasbro holding the toy licenses for both of those properties? They can do cool combo stuff, like today’s focus, Clone Commander Doom, who began his life as a minor, cool little reference character, who I’m sure no one ever thought would get an actual figure with that name. But, here he is! Isn’t that cool?

THE FIGURE ITSELF

CommanderDoom2Commander Doom was released in the second series of the 2014 round of the 3 ¾ inch Star Wars: The Black Series figures. Did you get all that? Should I repeat it? Yeah, Hasbro’s release schemes are just a tad confusing. Commander Doom here is based on his appearance in the Star Wars: The Clone Wars episode “The Unknown,” where his animation model was based on Dr. Doom, the Marvel Comics character. One has to wonder if Commander Doom has some sort of rivalry with Clone Commander Fantastic; that would be nifty. The figure stands just over 3 ¾ inches tall and has 24 points of articulation. Sadly, it seems that Hasbro’s cutting back on the articulation of the smaller-scale Black Series stuff again. Doom loses both the ball jointed hips and the mid-torso joint of prior Clone Troopers, which is a bit of a bummer to say the least. It might be hard to tell under that non-standard paintjob, but Doom’s armor is mostly standard issue stuff. He’s wearing a modified form of the Phase II trooper armor, with a visor/antenna added to his helmet (in a similar fashion to Commander Cody) and a battle “skirt” thing, which has holsters for his blasters. It’s worth noting that, while Doom hails from an animated show, this figure has been sculpted to fit in with the more realistic figures that make up the rest of the line. With that in mind, Doom’s sculpt does a pretty good job of taking his design from the show and translating it into “real life.” The sculpt is a little softer than I’d like in some areas, but it’s nicely handled overall. I’m still not 100% sold on the look of the wrist joints, but that’s a minor issue, and the movement they provide is certainly enough to warrant their inclusion. Now, this is a Hasbro figure, which means that, no matter how good the sculpt may be, the paint is likely to be a letdown. While I certainly wouldn’t say this figure has the worst paint I’ve ever seen on a Hasbro figure, he’s still got more than a few occurrences of bleed over and slop. Also, his arms and legs are just molded in a slight off-white, as opposed to being grey due to scuffs and dirt, which robs him just a bit of his uniqueness. Aside from those issues, I will say Doom’s a pretty vibrant figure, especially for a Star Wars figure, and I enjoy how the various customizations to his armor have been carried out. Doom is packed with a pair of blaster pistols, which can be held or stored in his holsters. This feels a little light, especially for the higher Black Series price.

THE ME HALF OF THE EQUATION

While I was out looking for new stuff on Force Friday (and also visiting Super Awesome Girlfriend for the weekend), one of the Walmarts I stopped by happened to have some of the pre-Force Awakens Black Series figures in stock, this guy included. I had actually been hoping to find this guy ever since I stumbled upon the pictures of his prototype online, so I was pretty happy about stumbling across him. Doom has his share of issues, but he definitely stands out from the rest of my Star Wars figures, and he’s a shout out to one of the best characters in comics to boot!

CommanderDoom3

#0716: Age of Ultron Boxed Set

THOR, BLACK WIDOW, BRUCE BANNER, & HAWKEYE

MARVEL LEGENDS INFINITE SERIES

AoUML1

Trying to get a full line-up of the whole Avengers team from Avengers: Age of Ultron has been a barren source of amusement. Hasbro’s 2 ½ inch line has given us all but Black Widow and Quicksilver. The 3 ¾ inch line is missing those two again, plus Hawkeye and Vision. Up until recently, the Marvel Legends figures had only given us movie versions of Hulk, Iron Man and Captain America. Amazon has stepped in to help us at least finish up the main team (sans new additions), giving us a boxed set containing Thor, Black Widow, and Hawkeye from the second film, as well as figure of Mark Ruffalo’s Bruce Banner for good measure.

THE FIGURES THEMSELVES

These four were sold as a single boxed set, which just started shipping out a few weeks ago. They’re technically an Amazon exclusive, but time will tell if that sticks or if other stores might start getting them.

THOR

AoUML2This guy’s probably the most surprising to see relegated to an online-only boxed set. I mean, he’s Thor. That seems pretty big. But, I guess stores are still afraid of him after the incredibly slow sales of the toys from his first solo movie (available at a Toys R Us near you!). The figure is about 7 inches tall and has 28 points of articulation. He’s based on his design from Dark World/Age of Ultron (They’re more or less the same), specifically the sleeveless look. Since he’s lacking the sleeves in both of AoU’s main fight scenes, that seems like a good choice. Structurally, this guy’s all-new, making him the only AoU figure outside of Ultron to get all-new tooling. The sculpt is really great, all around. The face isn’t a pitch-perfect Hemsworth, but it’s definitely the closest Hasbro’s gotten so far, and it really isn’t far off. The hair manages to be rather intricately detailed, and it doesn’t get too bunchy anywhere. It also doesn’t restrict movement nearly as much as you might think, which is a definite plus. The rest of the body is well proportioned and loaded with detail, all of which looks pretty accurate to the movie design. Even the cape is handled well, which doesn’t happen often. If there’s one drawback, it’s the choice to make both hands gripping; I feel like one of them being in a more outstretched pose could have added to the posing options. The paint on this figure is interesting, as it’s quite a bit different from what was seen on the prototype. In addition to the paint being much thicker than on the final figure, the prototype also had many of the accents painted gold, making the figure a Dark World figure, not an Age of Ultron figure. The final still has a slight tint of gold on those areas, but it’s minor enough that it won’t stand out as obviously wrong in an Avengers set up. It’s a happy medium, which is a good choice. Thor is armed with his mighty hammer Mjolnir, which is very nicely sculpted and painted and fits well in his hand to boot.

BLACK WIDOW

AoUML4On to opposite end of the spectrum from the all-new Thor figure is Black Widow, who is just a repaint. Yep, Widow here is head to toe a repaint of her Winter Soldier figure. You can read my opinions on the sculpt, here. Briefly recapping, it was a good sculpt then, and it still holds up pretty well here, aside from being too tall for Johansson. She uses the Avengers-styled head (the hair is seated a bit better this time around, so the likeness is better), which is sensible, since her hair in AoU was more or less the same. What wasn’t more or less the same was her costume, which actually had several differences between TWS and AoU. The figure uses paint to make these changes, but doesn’t quite make it work. The most notable change to the costume was the addition of red gauntlets, which this figure skips all together. There are these random red squares on the forearms, but they don’t even come close to being “gauntlets.” Widow also had full gloves this time, as opposed to the usual fingerless ones. Rather than actually changing the hands, Hasbro opted to just mold them in a solid black. It’s not immediately evident that they aren’t right, but to someone like me, who knows the lines for the ends of the gloves are there, it’s kind of annoying that nothing was done to fix this. They did at least get the blue “tron lines” right, so there’s that. Also, the kneepads seem a little too bright, but they are, at the very least, close to accurate. For accessories, Widow loses the extra head and hands of her TWS counterpart, and still has the non-removable guns. She does get her baton thingies from the movie, but they’re kind of a little…droopy.

BRUCE BANNER

AoUML5Believe it or not, this is the first proper, Marvel Legends-scale Bruce Banner we’ve ever gotten. We got a Banner figure from Toy Biz’s Hulk Classics line (packed with Series 2’s Gamma Hulk), but he had inferior articulation and was just slightly out of scale. We haven’t seen another until now. Civilian versions of heroes are kind of a hard sell, I guess. Banner appears to be based on his arriving at the Helicarrier look from the first Avengers movie, though it’s really just a basic business casual look, so it can work a lot of places. The figure stands about 6 inches tall and has 30 points of articulation. Banner uses the recently developed suit body (first used on Agent Coulson) as his base. It’s a well sculpted body, and it’s certainly the best suit body on the market, so it’s a good starting point. Bruce gets a unique head sculpt, as well as a new upper torso piece. The head is a halfway decent interpretation of Mark Ruffalo. It’s far from perfect, but you can see who it’s meant to be. I think a better paint job could bring the likeness a lot closer. The new upper torso piece is really just a minor tweak on the old, removing the tie and opening up the collar, and thereby giving Bruce a more movie-accurate look. The paintwork on Banner is alright, but not fantastic. As noted above, the paint on the head hides the sculpt; it’s just a bit too sloppy and there’s virtually no work done to play up the sculpt’s strengths. The rest of the paint is just sort of there; the colors are good and everything stays where it’s supposed to, but there’s not much that stands out. Banner includes no accessories.

HAWKEYE

AoUML3It’s everybody’s favorite punching bag, Hawkeye! After being somewhat pushed to the side in the first Avengers, Hawkeye was presented a more substantial role for Age of Ultron, where he took a slightly divergent path from his comics counterpart and went straight to work checking off every “I’m gonna die” box possible. Then he made it out without dying! And there was much rejoicing (yay).  Hawkeye is right at 6 inches tall (like Widow, he’s just too tall) and he has 30 points of articulation. The figure is largely made of re-used parts from the first movie’s Walmart exclusive Hawkeye; only the head and quiver are different, and even the quiver is re-used from the more recent Marvel Legends comic Hawkeye. This of course means that Hawkeye is in his costume from the first movie, as opposed to his snazzy jacketed look from AoU. This look does still appear during the final battle, though, and the first release of this figure wasn’t the easiest to find, so this look is pretty valid too, I guess. Overall, the sculpt is pretty decent. The articulation scheme is a little outdated and the proportions are a little wonky in some spots, but the texture work on the uniform is superb. The new head sculpt is noteworthy because it finally gives us Hawkeye without the sunglasses that every figure seems to saddle him with, despite him not wearing them in either film. The Renner likeness is pretty decent, though the head does feel just a touch too wide. The paintwork on Hawkeye is pretty good overall. The eyes are a little bit off, but not terribly so, and all of the colors are well chosen. I also appreciate that the quiver isn’t just a solid color. I do wish the spot for the SHIELD emblem had something on it, because it’s distracting for it to just be a differently textured but unpainted bit, but that’s minor. Hawkeye is packed with his trusty bow, but, like the other Hawkeyes from Hasbro, no arrows.

THE ME HALF OF THE EQUATION

Wanna take a guess as to where I got this here Amazon exclusive set? Yeah, I preordered this set pretty much as soon as it went up. Not gonna lie, I actually came pretty close to cancelling it, but Amazon went and shipped it without telling me it had arrived, so here it is. It’s not the most thrilling set of all time, but it does contain some pretty important figures. Thor’s definitely the star here, being the only truly new figure, and Widow’s definitely the weakest link (in terms of accuracy and not having anything new to offer. She’s still a good figure). Banner and Hawkeye both fall somewhere in between, being nonessential, but cool to have nonetheless. I think this set might be more exciting if Amazon were to follow it up with another 4-pack featuring Scarlet Witch, Quicksilver, Vision, and Falcon, so we could actually finish up the team, but that seems like wishful thinking.

AoUML6