Tag Archives: Hasbro

#2292: Valkyrie

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

VALKYRIE

MARVEL LEGENDS (HASBRO)

“An honored warrior, Valkyrie uses her strength and skill to defend Asgard.”

I started my first Valkyrie review on this site with a comment that I “sure hoped Valkyrie would get her due” and get to be in the focus…given that her action figure numbers have doubled and she’s been in two major motion pictures, I guess she finally did.  Can I get a resounding “yay”?  In 2017, when she made her first cinematic appearance in Ragnarok, she was fortunate enough to get a Legends release of one of her two looks from the film.  It was a pretty decent figure, but the scaling was a little wonky, and it was only one of the two looks.  When the other look appeared in Endgame, that gave Hasbro some leeway to get around to that other look, and give us a second version of the MCU’s Valkyrie.

THE FIGURE ITSELF

Valkyrie is another figure from the “Thor” Series (commonly referred to as the “Bro Thor” Series) of Marvel Legends, which was the third Endgame-themed assortment of 2019.  She’s wearing her proper Valkyrie armor, and that means the figure is pulling double duty, giving us Valkyrie not only as she appears in Endgame‘s final battle, but also Ragnarok‘s.  The figure is about 6 inches tall and she has 27 points of articulation.  This Valkyrie is a completely new sculpt from the last one, which is sensible.  The two costumes don’t really have much common ground, and that one was a little bit up-scaled (like a few of the Thor figures have been).  Also, while the Tessa Thompson likeness on the first figure was solid, this one is even better.  It’s amazing how much better Hasbro has gotten at capturing a likeness in just two years.  The hair is a separate piece (as has become the new normal), and hangs fairly naturally; the situating of the braids over her shoulder also helps to preserve her neck articulation, which is always a plus.  The rest of the body sculpt is a pretty decent offering; they’ve managed to capture the details of the armor quite nicely, and I certainly appreciate how well they’ve integrated the various overlays in order to keep the depth of the real design.  Her cape has a nice sort of dynamic flair to it, which I prefer to the totally flat cape of the prior release.  My only real complaint is that my figure has a hard time staying standing; I don’t know if that’s going to be an across the board thing or not.  Valkyrie’s paint work is all pretty solid.  The face print is definitely one of the better ones, and the rest of the color scheme has some nice pop to it.  I think she’s technically supposed to have some war paint on her face, but it’s a fairly small detail.  Valkyrie is packed with the same sword and sheath combo as before, though it feels like it scales a bit better this time.  She also includes the leg of the Thor BaF.

THE ME HALF OF THE EQUATION

I can’t say I had an undying need for this figure.  I was happy with the previous one, at least at the time it was released.  Of course, I wasn’t going to turn this figure down either.  After getting her in hand, now I feel even better about having her, because she’s ultimately a lot nicer than the prior offering, and makes for a strong addition to the growing Endgame ranks.

I picked up Valkyrie from my friends All Time Toys, and she’s still in stock here.  If you’re looking for other cool toys both old and new, please check out their website and their eBay Store.

#2291: Iron Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

IRON MAN

MARVEL LEGENDS (HASBRO)

“Tony Stark gears up in his highly advanced Mark LXXXV armor.”

When Iron Man first appeared on the big screen in 2008, he did so in a suit of armor that was a respectable recreation of his then current armor in the comics.  It was sensible from a marketing standpoint of course; having your character in the same basic costume across different forms of media is typically a good idea; but it was also sensible from the angle of making him work in a real world setting.  As cool as Tony’s classic armor may be, it’s hard to sell an audience on the classic skin-tight-looking design existing in the real world….or is it?  After 10 years with various modern reinterpretations, Endgame‘s Mark 85 armor, much like Cap’s new and improved uniform, finally got us something much closer to that classic Iron Man design.

THE FIGURE ITSELF

Iron Man is part of the “Thor” Series of Marvel Legends, the third Endgame-based assortment of 2019.  As noted in the intro, he’s sporting the Mark 85 armor, which made its debut in Endgame and is heavily inspired by Tony’s 60s/70s armor from the comics.  The figure stands 6 1/2 inches tall and he has 31 points of articulation.  The Mark 85 is an all-new sculpt, unsurprising given that this particular armor design is the most divergent standard armor from a design standpoint.  That said, its heavily rumored we’ll be seeing a lot of the sculpt turn up again for some sort of final battle release in some sort of exclusive or boxed set form.  Joint layout and integration on this figure is pretty similar to the Mark 50, but the actual construction of the figure feels a lot more solid, and the joints get a bit more range.  The all-new sculpt does a pretty respectable job of capturing the design of the armor from the movie in plastic form.  The decision to push him back to the third assortment was a solid one, since it allows for the figure to be more accurate to the final film design than other film Iron Men.  It’s still not perfect; like the Mark 50, it’s still not quite as sleek as the final film design, but it does still manage to land a bit closer.  The detail work is all pretty sharp, though, and the figure is as a whole a very cohesive sculpt.  He’s one of the most solidly assembled MCU Iron Men, really rivaled only by the Mark VII figure from 2018.  The paint work on Iron Man isn’t too complicated, but it gets all of the important details and, unlike the 50, it manages to actually stick to the movie’s color scheme.  I appreciate sticking with the painted gold as well; it ends up making for a nicer looking final product.  One of the biggest flaws with the Mark 50 was his lack of extras, and in that regard, the 85 definitely does a little better.  He gets a spare set of repuslor hands (which finally have actual universal joints on the wrists again, after far too many figures with simple cut joints on the extra hands), plus four repulsor effects, meaning you no longer have to choose between using them for the hands or feet.  That’s just what he gets for himself; he’s also got some extras for other figures.  The first is the other arm of the Thor figure (complete with a spare hand with the time travel device), and the second is an alternate nano-tech gauntlet for last series’ Hulk BaF.  It’s a little weird that he gets the gauntlet for another figure and not for himself, but that sort of adds fuel to those rumors of a second version of this armor.

THE ME HALF OF THE EQUATION

I wanted two things when I walked out of the theater after seeing Endgame the first time.  The first was Cap’s new costume.  The second was this guy.  As much as I like Iron Man, and as much as I can appreciate the various MCU armors purely aesthetically, by around Iron Man 3, I was really longing for a proper classic Iron Man, which resulted in each successive MCU figure not quite hitting the way I wanted.  Once this design was unveiled, I knew I wanted it, and I was definitely happy when he was shown off with this assortment.  He’s a really nice figure, and a great basic, clean Iron Man figure, easily rivaling the Mark VII in terms of being the best MCU Iron Man figure.  Definitely this assortment’s star piece.

Iron Man was purchased from my friends at All Time Toys, and he’s currently in-stock at their store, here. And, if you’re looking for other toys both old and new, please check out their website and their eBay storefront.

#2290: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

CAPTAIN AMERICA

MARVEL LEGENDS (HASBRO)

“The all-American hero Captain America charges into battle for justice.”

Back in 2012, Marvel Legends was kind of in hibernation, meaning the main line of Avengers figures were in the smaller 3 3/4-inch scale.  Walmart, however, carried an exclusive line of Legends-styled figures for the movie, to at least give us (most) of the main cast.  These figures were still a little rarer than the usual release, however, and over the course of the last eight years, Hasbro have done what they can to get some of those figures (or at least those looks) back to market.  A lengthy flashback sequence (plus an involved fight scene) in Endgame proved a fairly good excuse to put back out the first movie’s take on Cap.

THE FIGURE ITSELF

Captain America (affectionately referred to as “America’s Ass” Cap by the fanbase, due to the movie’s commentary on the costume’s…benefits to Cap’s physique) is part of the third Endgame-themed series of Marvel Legends.  While the assortment was officially a fall 2019 release, there was a definite split in distribution, which caused a lot of the figures to be pretty scarce until around the first week of 2020.  The figure stands 6 1/2 inches tall and he has 29 points of articulation.  As far as the sculpt is concerned, this figure’s completely re-use, though not all from the same source.  The majority of the figure is the old Walmart release, with the head of the Quantum Suit Cap (which I had pegged for re-use when it debuted).  The head was the most inaccurate part of the original figure, so the replacement is certainly an improvement.  Unfortunately, while the head may work in modern times, the body, though good in 2012, is really out of date eight years later.  The articulation on the hips his definitely the weakest bit, but the lack of proper wrists also holds him back, as does his limited range of the shoulders.  The head also sits a little high on the neck, and takes some pretty careful posing to not look super goony.  Also, despite the whole “America’s Ass” commentary from the movie, the old sculpt definitely doesn’t do that aspect of the costume any favors.  Obviously, Hasbro was looking for a figure to save some tooling costs on, but ultimately, this is a figure that should have warranted an all-new body sculpt; the old one just doesn’t quite pass muster anymore.  The paintwork on this figure changes things up a bit from the original release; the brighter colors of the Walmart figure have been toned down a fair bit, resulting in a more film-accurate color scheme.  Additionally, he’s got the face printing on the head, making the figure look a little more lifelike.  Cap gets the upgraded shield from the 10th Anniversary line in place of the old one, as well as one of the arms for the Thor Build-A-Figure.

THE ME HALF OF THE EQUATION

This Cap figure fills me with mixed emotions…which seems to have been a running theme for Cap Legends in 2019, honestly.  I never hated the 2012 costume the way others did, so I’m not put off by the prospect of an update, especially given it’s prominence in Endgame.  The 2012 figure certainly wasn’t bad for his time, and I reviewed him quite favorably when I looked at him back in 2018. Unfortunately, the rehash feels kind of hollow, especially when compared to some of the other work Hasbro put out last year, and it’s also hard not to view this figure as taking the regular retail slot from the standard Endgame Cap, who would have made far more sense in one of the standard assortments, and who still proves particularly hard to acquire for a lot of fans.  Obviously, there are things behind the scenes at Hasbro that I’m not privy to, so I can’t know exactly why they chose to do things this way, but it doesn’t stop this Cap figure from feeling somewhat lackluster, and not quite what I wanted.

Cap was purchased from my friends at All Time Toys, and he’s currently in-stock at their store, here. And, if you’re looking for other toys both old and new, please check out their website and their eBay storefront.

#2288: Spirit Iron-Knife

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SPIRIT IRON-KNIFE

G.I. JOE: SIGMA 6 (HASBRO)

“Spirit Iron-Knife started in field operations and was selected for the most difficult missions because of his outstanding ability to spot overlooked clues.  He became a lead investigator at special ops and solved complex cases with his ability to track suspects using shreds of information.  He was soon promoted to covert ops and used his tracking skills to to uncover criminals skilled at concealing their existence.  He is also an expert at creating small, precisely targeted explosions that disable mechanical or electronic systems without destroying the entire structure.  He is a highly skilled marksman with his bow, using technologically advanced arrows that deliver powerful explosions.”

In the last several months, I’ve taken some time to really look at the G.I. Joe franchise, with a real focus on its ’80s A Real American Hero incarnation, which was by far the franchises most popular and successful incarnation.  Now I’m taking a jump ahead to the incarnation that followed, Sigma 6.  Launched in the mid-00s, it tried to modernize things and tap into what was popular at the time, and it was honestly a pretty decent success. Well, purely commercially, anyway.  With the pre-existing fans?  Let’s just say they don’t deal well with change.  So, after a solid three year run, it was put to bed and replaced with a return to the old.  But, let’s not focus on the end, let’s focus on the beginning, with one of the line’s launch figures, a re-imagined Spirit Iron-Knife.

THE FIGURE ITSELF

Spirit Iron-Knife was one of the five figures released in the first Commando assortment of the Sigma 6 line, which launched the line in 2005.  Compared to the others in the assortment, Spirit was something of an oddball choice, not being amongst what people would typically consider the “core” Joes.  The figure stands 8 inches tall and he has 25 points of articulation.  His sculpt was all-new at launch (and would later be re-used for a second version of Spirit), though it certainly had some similarities to his team-mates, given the line’s general style and the uniformed nature of the Joes.  Spirit’s design is shared with his cartoon counterpart, and marked something of a departure from his original ’84 design (which was a little bit stereotypical for a Native American tracker).  He had received quite a redesign in the comics that accompanied the 2002 relaunch of ARAH, and his S6 design seemed to take a few elements from that, as well as being the first version of the character to tap into Billy from Predator as a design inspiration.  The final result is honestly the most unique of the five initial figures, not just when compared to the other four in the same set, but also compared to prior versions of Spirit himself.  The figure’s sculpt is definitely the coolest of the initial assortment, showing some neat deviations from the standard uniform, and giving us a head with a lot of character behind it.  As one of the more deluxe “Commando” releases, he also got to be a slightly mixed media affair.  Not only is his head band cloth, but he’s also got a pair of actual pants to wear over his Sigma suit, as well as the usual set of dogtags.  The figure was then armed with a bow, four arrows, a quiver, a knife, a sheath, a pair of axes, and his pet eagle.  As is the nature of the Sigma 6 beast, mine is incomplete, with only the bow and the knife sheath.  I know, for shame.

THE ME HALF OF THE EQUATION

As I’ve discussed before, Sigma 6 was a concept I very much enjoyed, but unfortunately not a line I was able to get much of when it was new.  Spirit was a figure I always wanted, but was just never able to get.  I was eventually able to track one down back in November of 2018.  It took a while to get him and he’s not complete, but it’s still very nice to have even just the core figure, because he’s quite a cool offering.

#2286: C-3PO

Posted by Ethan Wilson in Reviews and tagged with , , , ,

C-3PO

STAR WARS: GALAXY OF ADVENTURES (HASBRO)

C-3PO presents an interesting conundrum for toy makers.  He’s undoubtedly one of the most distinctive characters in the franchise, and certainly most fans are down for a toy of him.  That said, he’s never been particularly action-oriented, so he’s maybe not the easiest sell to kids.  If he’s produced in the same numbers as other main characters, he lingers, but if he’s under-produced he goes for silly money.  How do you distribute such a character?  Revision cases are, for once, not a bad solution.

THE FIGURE ITSELF

C-3PO joins Han as one of the two new figures in the second series of Galaxy of Adventures.  He’s only in this assortment right now, and given how things tend to work with 3PO, I wouldn’t be shocked if this is all we see of him for the time being.  3PO had essentially the same look for all three of the original trilogy films, and that’s the one that this figure goes for, which is a decent enough choice.  The figure stands a little under 5 inches tall and he has 21 points of articulation.  That’s a lower articulation count than the usual, due to the lack of elbow joints.  Admittedly, not even the initial Black Series version had those joints, so I can’t fault them for leaving those joints out here.  3PO is sporting another new sculpt for this line, and is again playing into the style of the line as a whole.  He’s not super different from how he usually looks, just a little more svelte in the limbs and lower face.  It’s kind of halfway between Clone Wars and Droids.  It certainly gets all of the appropriate elements to sum up the character, though.   If I have one minor complaint about the figure, it’s that his neck is a touch long for my taste, but beyond that, it’s another strong sculpt for the line.  3PO’s coloring is predominantly handled via molded plastic, which works fine, and is certainly better looking on a stylized figure like this than it would be on a more realistic 3PO.  The only paint is on the eyes, the wires, and the undersides of his hands.  It’s all pretty good on mine, but I know the eyes have been pretty wonky on most samples.  3PO doesn’t have any accessories, but he does have one of the most involved action features of the line.  Pressing the button on 3PO’s back sends his head, legs, and left arm flying off, as if he’s just been blasted to parts.  Given how frequently 3PO gets knocked apart, this is certainly an appropriate feature for him, and it works pretty nicely, without impeding his actual playability too much.

THE ME HALF OF THE EQUATION

I got 3PO at the same time as Han, again courtesy of Max.  I was definitely more interested in Han, but I’m loving the line enough to want to pick everything up right now, and 3PO was along for the ride.  He’s a little more gimmicky than most of the line, but it works for him, and he’s still a very fun figure.

#2285: Han Solo

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HAN SOLO

STAR WARS: GALAXY OF ADVENTURES (HASBRO)

At launch, Galaxy of Adventures‘ primary focus was on the latest installment in the Star Wars franchise, Rise of Skywalker, but it was not without a few throwback figures.  For the second assortment, they stepped the Original Trilogy content up, adding two of the trilogy’s core characters to the line-up.  It’s hard to imagine any Star Wars line without a Han Solo, and fortunately we don’t have to do that for Galaxy of Adventures, because here he is!

THE FIGURE ITSELF

Han is one of the two new figures in the Series 2 pack-out for Galaxy of Adventures.  As of right now, he’s only available in this particular assortment, but I fully expect that he’ll be mixed into another case packout this year, since that seems to be the way Galaxy of Adventures is going to be working.  While Luke was based on his Return of the Jedi appearance and Vader was definitely an amalgamation, Han is in his A New Hope attire.  It’s actually a little bit surprising, since his smaller GoA figure was in the Bespin look, but either one makes for a strong Han appearance.  The figure stands 5 inches tall and he has 23 points of articulation.  His articulation is pretty much the same as all of the other GoA articulation, meaning that he’s quite posable, and also quite steady on his feet.  There’s a slight restriction at the right hip, where he’s got the holster, but it’s actually not as bad as it is on most recent Hans.  You can still get him to sit without too much trouble.  Han’s sculpt follows the stylization of the rest of the line, and I really feel that Han translates the best of the human figures.  Something about his design just really jibes well with the aesthetic.  It helps that he’s also got one of the most expressive faces in the line to date; that cocky grin is perfect for Han, especially his earlier incarnation.  It’s not a Ford likeness, but it’s a good character likeness for Han, and not even trying for the Ford likeness honestly puts him ahead of most versions of Han that aim to be more realistic.  Like other figures in the line, he’s just generally got a very clean appearance about him, which works well in figure form.  Han’s paintwork is by and large pretty clean; there are some slight spots of bleed over on the stripes of the pants, but other then that he looks quite good.  Like the Rey from the two pack, the coloring on the face is stepped back a notch from the first series, making for a slightly better look in my eyes.  Han is packed with his usual blaster, which fits nicely in his hand or his holster without issue.  He also has a spring-loaded arm, much like others in the line.

THE ME HALF OF THE EQUATION

Han was on my list of figures I wanted even before I’d tried out the rest of the line, mostly because his prototype was just one of the better ones they showed off in that initial wave of photos.  He was definitely high on my want list.  Fortunately, Max was able to score one for me just before the holiday season.  He’s a very solid figure, and easily one of my favorites from the line so far.

#2284: Kylo Ren vs Rey

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SUPREME LEADER KYLO REN VS REY

STAR WARS: GALAXY OF ADVENTURES (HASBRO)

At the tail-end of last year, I covered the first chunk of figures offered in Hasbro’s recently-launched Galaxy of Advetures line.  There were a pretty sizable amount of figures available at the line’s launch, along with an exclusive Luke figure fairly shortly after.  Then it was time to move into the line’s real second round of product, made up of three new pieces.  I’ll be covering all three items this week, starting things off with the least “new” of the three, a Reylo-themed two-pack.

THE FIGURES THEMSELVES

Kylo and Rey are the line’s second multi-pack, following the Droids release from launch.  They’re a Target-exclusive item, which appears to have been a slightly later in the game decision, since there wasn’t really much promotion of that fact.  They started hitting shelves in late November of last year.  Both figures included are slight tweaks of their single releases.

KYLO REN

Definitely the selling point of the set for most, Kylo’s the figure that has the most noticeable changes, the most visible of which is the brand-new unmasked head.  It’s a decent piece, matching with the rest of the human heads in terms of styling and character vs actor likeness.  The paint seems like a slight toning down compared to some of the single releases, with less color throughout the face.  I like this a little more, so I’m glad to see them pulling it back a bit.  From the neck down, he’s the same as the single release, which is fine by me, as I liked that release a lot.  In terms of accessories, he loses the hooded cloak, which is a little sad, but gets to keep his helmeted head and lightsaber, so he ends up with the same number of extras.  The helmeted head is ever so slightly different from the regular in terms of paint, but it could honestly be a case by case thing.  Something that I certainly hope is more a case by case thing is how tight the neck joint is on my figure.  When I swapped the heads and went to swap back to the unmasked, the ball joint came out of the helmet the wrong way, and it took quite a bit of work to get them properly swapped back.  I’ve got both Kylos, so I’m fine with leaving this one unmasked, but that would be a very different situation for someone who only has this release.

REY

The core Rey figure here is far less changed from her single release than Kylo.  The only real differences are mostly superficial.  The face paint is again toned down a bit, and the joints seem a touch tighter on this Rey than my single.  Beyond that, they’re the same figure.  She does get one additional accessory this time: her bag, present on both the Vintage Collection and Black Series figures, but missing from the GoA release.  It’s nothing major, but it’s cool that they gave her a little something extra.

THE ME HALF OF THE EQUATION

I had contemplated holding off on the single Rey until this set was released, but ultimately didn’t, so then I wasn’t sure I was going to grab this set at all.  After falling in love with this line, though, I had a hard time saying no to another figure, especially when I had literally everything else they’d released.  The neck joint issue on Kylo is annoying, but I’m otherwise pretty happy with this set, and was even able to set Max up with the extra Rey figure.  Ultimately, I think most people will chose either the set or the singles for these, and if I’m honest, the set’s a slightly better value.

#2281: Major Vonreg

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MAJOR VONREG

STAR WARS RESISTANCE (HASBRO)

“A vicious, daring man of few words, Major Vonreg is known for his custom crimson TIE fighter and his lightning fast strikes against anyone who dares intrude into First Order territory.”

For my last day of Post-Christmas reviews for this year, I’m taking a look at another figure from Star Wars Resistance.  Yesterday’s figure, Kaz, was part of the show’s titular resistance, but today’s figure hails from the other side of the war, the First Order.  While the majority of the First Order we’ve seen have been their ground troops, Resistance‘s focus on pilots translated to both sides.  Kylo took the part of star pilot of the First Order in the films, but the show introduced its own villainous lean pilot, Major Vonreg.

THE FIGURE ITSELF

Major Vonreg is another basic figure from the first (and only) assortment of Star Wars Resistance figures.  He was one of three villains available present in the line-up.  The figure stands 3 3/4 inches tall and he has 5 points of articulation.  He’s an all-new sculpt, based on one of the show’s more distinctive designs.  Clearly, he’s got the standard First Order TIE pilot as a starting point, which is fine by me.  He’s a little more armored, and he’s got an all-new helmet design, which calls back to the Clone Pilots and is definitely one of the coolest First Order designs.  It’s sleek, it’s imposing, and it makes him pretty distinctive.  Of the three Resistance figures I’ve looked at so far, Vonreg is the only one to be fully armored up.  This makes the stylization from the show a little less evident, meaning this figure actually doesn’t look too out of place with the standard movie fare.  That makes him even more versatile, and I’m all about it.  The sculpt sports some decent detail work, especially on that underlying jumpsuit.  Despite not actually having a face, he’s actually one of the more detailed figures from the line.  The paintwork on Vonreg is a fairly distinctive look…or at least it was before we had a whole sub-division of all red troops.  Of course, I guess he could double as a Sith Trooper Pilot if you were so inclined.  Whatever the case, the all red look is a good look, and the variations of shades help him from being too bland.  Vonreg is packed with a small blaster pistol.

THE ME HALF OF THE EQUATION

Between yesterday’s review and today’s, I’ve managed to watch a few episodes of the show, so hey, I’m not a total novice.  Not that the first couple of episodes have much of Vonreg here, but at least I’ve got some background.  Like yesterday’s figure, Vonreg was given to me by Cheyenne, who was determined to get me at least a few figures I didn’t have.  Vonreg is another pretty fun figure, aided further by his ability to fit in not just with figures from this line, but also from the main movie line.  He’s a solid trooper figure, even if he is technically a named character.

#2280: Kaz Xiono

Posted by Ethan Wilson in Reviews and tagged with , , , ,

KAZ XIONO

STAR WARS RESISTANCE (HASBRO)

“Confident and skilled when piloting a New Republic X-wing fighter, Kaz now feels out of his element having been assigned to be a spy for the Resistance.”

The Post-Christmas reviews are finally starting to wrap up here, and for the last two days, I’ll be looking at a pair of items with a common theme.  In addition to keeping with my whole “back to the beginning” thing by bookending this year’s reviews with another set of Star Wars reviews, the two final figure reviews hail from Disney’s Star Wars Resistance, their two-season Sequel-era cartoon that launched in 2018.  In addition to a few returning faces (including my dude Poe), the show also introduced a sizable cast of new characters.  Today, I’m taking a look at the show’s main character Kaz Xiono!

THE FIGURE ITSELF

Kaz Xiono was released in the six figure basic figure assortment for Star Wars Resistance‘s launch assortment…of course the launch was all we ended up getting, so there’s that.  The figure stands 3 3/4 inches tall and he’s got 5 points of articulation.  He and the rest of his companions would of course end up being the last new 5POA figures we would receive, at least as of right now.  Kaz is based on his standard look from the show, with an all-new sculpt that is an impressive recreation of his animated design.  Though he’s little more than a basic civilian in appearance, the design is still quite sharply rendered, with even a separate jacket piece to help add some more depth to the design.  He’s a very clean looking figure.  He’s also a very playable figure; though he’s only got those basic joints, they’re all unimpeded by the sculpt, making this a figure that’s perfect for use in vehicles.  Shame there weren’t any to go with the line, but alas, no sense crying over that now.  The paintwork, like the sculpt is clean and basic.  The green is cool, since that’s a rarer color with your typical Star Wars character, making Kaz something of a standout amongst his peers.  Kaz is packed with a removable helmet and a blaster pistol.  The pistol is the same one included with Poe, but the helmet’s all-new, and another very nicely done piece, as it goes on and off without any trouble.  It’s also got a pretty fun pattern printed on it, continuing the trend of having him stand out a bit from other such figures.

THE ME HALF OF THE EQUATION

So, I have to admit, I’ve still yet to see a single episode of Resistance.  I didn’t have cable when it started airing.  Now I’ve got Disney+, so there’s really no excuse, but I still haven’t made the time to sit down and watch it.  That means I’m not actually familiar with Kaz here.  That said, the lack of a 5POA line for Rise of Skywalker made me really want something new of that style, and here was this pretty nifty line of figures I never actually bought.  Cheyenne (of Chey and Jess’ fun time reviews) was nice enough to get me Kaz here as a Christmas gift, and I gotta say, he’s just a really nifty little figure.  I’m happy to have him, and really feel like I should watch the show now.

#2279: Alpha Flight

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , , , , ,

VINDICATOR, PUCK, NORTHSTAR, AURORA, SHAMAN, & SNOWBIRD

MARVEL LEGENDS (HASBRO)

Remember when I reviewed Guardian back in September, and I mentioned that Hasbro had thrown out the concept of trying to release all of the Alpha Flight team-members one at a time in favor of dropping them all at once in one fell swoop as an Amazon-exclusive set?  Well, here we are.  Just about a whole team in one go.  It’s just how they do.  Introduced in the pages of Uncanny X-Men #120 as part of Wolverine’s backstory, they eventually got a book of their own, which ran for over a decade.  Since that original run, though, they’ve had a little trouble keeping in the public eye, which has made their toy prospects a little tricky, especially since they’ve got a rather sizable line-up.  One big drop is pretty much the only way any company has ever been able to get them out to market, and that’s exactly what Hasbro did here.

THE FIGURES THEMSELVES

This six figure set is an Amazon-exclusive Marvel Legends offering, which was first listed for pre-order last fall, and started shipping about a month or two ago.   It’s designed to augment the Guardian and Sasquatch figures recently released in the main line, as well as giving fans a second chance at the incredibly hard to complete Puck build-a-figure from the last series of Return of Marvel Legends.

VINDICATOR

“Heather McNeill Hudson, Calgary, Alberta”

In an effort to keep up with my claims of having reviewed 100% of the Heather Hudson figures in existence (it’s easy when there’s only three of them), here’s the latest one of those.  Whoooo.   Like the other two, this one is Heather in her version of the Vidicator costume, which she started wearing after her husband Mac’s (first) death.  The figure stands just over 6 inches tall and she has 28 points of articulation.  She’s built on the Phoenix body, which works reasonably well for Heather (and confirms that Wolverine’s got something of a type…that type being red heads of a certain build who are married).  She fortunately swaps out the high heels for a pair of flat soles, and ditches one of the open hands for a first.  She also gets an all-new head sculpt, which is quite a nice piece.  It’s fairly basic, but it’s clean and it sits well on the body.  It’s also got a posable ponytail, which is handy for different flight based poses. Heather’s paint work is okay, but not without a few issues.  The biggest is the change in red from James‘ suit to this one.  The figures were close enough in production time, that the two of them really should have been sporting the same colors.  As it is, they are’t terribly far off, but it’s enough of a difference to be grating when they’re displayed together.  Additionally, the maple leaf emblem has really lost the maple-leaf-ness this time around, looking far more like a bunch of random jagged lines.  My last complaint is more of personal preference, but the opaque coloring on the visor is a little bit of a bummer, especially since both of her prior figures have managed to do translucent.

PUCK

“Eugene Judd, Saskatoon, Saskatchewan”

Puck is the one figure who’s had a Legends release before, as the Build-A-Figure in the self-entitled “Puck Series,” an assortment put together to tie-in with The Wolverine‘s release that ended up dumped on Diamond Distrubutors and then wound up being incredibly hard to find.  That all resulted in Puck having a rather inflated after market price and being something of a barrier to entry for any prospective Alpha Flight fans.  Hasbro is throwing fans a bone here with an almost straight re-release of that figure.  He stands 3 1/2 inches tall and he has 24 points of articulation.  Apart from a missing waist joint, he’s otherwise very nicely articulated for a figure of his size and stature.  His sculpt is the same as his Build-A-Figure counterpart, aside from his head, which is an all-new, better scaled to the body, and just generally superior head sculpt.  Though I never owned the BaF, I did have the Marvel Universe Puck, which is actually quite similar stylistically to this one, apart from being about 2/3rds the size.  I liked that sculpt a lot, and I like this sculpt a lot.  Puck’s paintwork is alright; it’s a bit sloppy on his logo, but otherwise things look pretty decent.

NORTHSTAR

“Jean-Paul Beaubier, Montreal, Quebec”

Northstar’s never had a Legends figure before, but he *was* part of Hasbro’s 2007 poll run by ToyFare, alongside his sister Aurora.  Why they decided to run tow halves of a pair in a fan poll that was only going to produce a single figure is anyone’s guess, but hey, at least he finally made it.  First Appearance Storm has as of yet not been quite so lucky.  Though the character has had a few looks over the years, this figure goes for the same one as all of his other figures, which is his first appearance suit.  To be fair, it’s his best look by far, so I’m not complaining at all.  The figure stands 6 1/4 inches tall and he has 34 points of articulation.  Northstar is built on the ANAD 2099 body, which is a decent enough choice for the character given how he’s usually drawn in the comics.  His head’s better scaled to the body than Quicksilver, the last character to use the body, so he’s off to a decent start.  Said head is the figure’s one new piece, and it’s a respectable offering, doing a solid job of marrying Byrne’s depictions of the character with the general Legends aesthetic.  He’s certainly looks suitably pompous and stuck on himself, which is really what you need for the character.  Unfortunately, he misses out on the one other thing the character could really benefit from: an open hand.  Both of his are fists, meaning he can’t hold hands with his sister, which is a major bummer, what with that being a whole part of their power set and all.  His paintwork is also a little iffy, due to the transitions between black and white being rather fuzzy, and their also being a few errant marks of the opposing color on both sections.  The pearlescent white is pretty nice, though.

AURORA

“Jeanne-Marie Beaubier, Montreal, Quebec”

As noted above, Aurora appeared alongside her brother in the 2007 fan poll, but was likewise not the winning figure, thus giving her the lengthy 12 year wait for a proper figure, which this set finally brought to an end.  Like her brother, Aurora is sporting her original design, which is again the cleanest and most dynamic of her various designs.  The figure stands 6 1/4 inches tall and she has 27 points of articulation.  Aurora is built on the Psylocke body, which is a solid choice for the character, though suffers from some issues with the plastic that the original release didn’t.  The primary issue is with the elbows, which have had reports of major issues with breakage.  While I’ve not experienced this with either of my figure’s arms, I will say that the joints are a little tighter than I’d like, which has made me very cautious when posing her.  Beyond the re-used body, she also gets one of the may open gesture hands in place of Psylocke’s grip (making Northstar’s fists even more egregious), as well as a brand new headsculpt.  Like her brother’s, the sculpt does a respectable job of marrying Byrne’s style with the general Legends aesthetic.  Her paintwork is very similar to Northstar’s, meaning it’s a little iffy on the costume, but overall an okay offering.  It’s a little bit cleaner on her than on her brother.

SHAMAN

“Dr. Michael Twoyoungmen, Calgary, Alberta”

Perhaps the most straight-forwardly-named member of the team, Shaman is also the least fortunate member when it comes to toys, having only a Minimate release to date, in contrast to the rest of the team having at least a couple releases under their belts.  Why he gets left out is anyone’s guess, but at least he wasn’t left out this time.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  Shaman is built on the Bucky Cap body, a mold which seems be starting to wear out, because Shaman doesn’t feel anywhere near as solid as earlier figures on the body.  I don’t dislike it’s continued use, but it’s a bit of an issue when it’s quality starts to fall as it has here.  I suppose to make up for it slightly, Shaman gets the most new pieces of all the figures in the set, with a new head, plus add-ons for his belt/loincloth and wrist bracers.  The parts are all nice enough; the head’s a little devoid of personality, but then that’s kind of Shaman, isn’t it?  The paint on Shaman is unfortunately the worst in the set.  Typically, he’s depicted in green and orange, but this figure has yellow instead, which just doesn’t look quite as good.  Additionally, the application is really sloppy, especially on the torso, which makes the whole thing look kind of messy.

SNOWBIRD

“Narya, Resolute Bay, Northwest Territories”

Snowbird as a character was one of Byrne’s earliest creations, actually pre-dating his comics work, and being refitted into Alpha Flight in their first appearance.  It’s kind of a shame he never took the time to, you know, actually make her a full character.  Sorry, is my dislike of Snowbird showing?  I’ll do my best to keep that under wraps.  The figure stands 6 1/2 inches tall and has 27 points of articulation.  I’m gonna be real here guys, I don’t actually recognize the parts Snowbird is built from.  They have to be re-use, because every thing else in this set is, but I’m at a loss myself.  The head and cape are both new to be sure, though.  They do their job of recreating her design alright.  The cape’s maybe a little smaller than usually shown in the comics, but that comes with trying to make it more manageable and not have the figure falling over all of the time.  Snowbird’s paintwork is decent enough.  There’s a slight mismatch between the shades of white on various parts of her costume, but it’s not too noticeable in person, and the metallic blue is certainly very nice looking.

THE ME HALF OF THE EQUATION

With Sasquatch and Guardian already in my collection, I was certainly intrigued by the prospect of slowly building an Alpha Flight line-up.  I didn’t really expect to do it all at once, but that’s how it happened.  I ended up getting this set from my parents for Christmas.  The set’s really more spectacle than anything, sold on the novelty of completing the team in one go.  Removed from that novelty, most of the figure’s are kind of middle of the road, which I guess is only fair, since so are most of the characters.  Puck marks an improvement on the impossible to find Build-A-Figure, so he’s the star of the set for me.  The rest are okay, but virtually all of them are held back by some small production issue, which makes the set feel…underwhelming?  At least when looking at the figures individually.  As a unit, paired with the other figures?  They are pretty cool.