Tag Archives: Iron Man

#0066: War Machine

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

WAR MACHINE

MARVEL SELECT

Today, I’ll be taking a look at another figure from the Marvel Select line.  This time around, it’s from the small assortment of figures released in the line to coincide with the release of Iron Man 3 this past summer.

THE FIGURE ITSELF

War Machine was released as part of the Iron Man 3 subset of the Marvel Select line.  Like the rest of the Marvel Select line, they don’t have specific “series”.  They tend to just be released on their own, or in pairs.  This figure is of course based on the War Machine 2.0 look from the *Tie-In comics to the* Summer Blockbuster Iron Man 3.  Yeah, despite it’s presence throughout the tie-in toys, the actual War Machine paint scheme is only in the lead-in comic, and makes no actual appearance in the film.  And yet this is the main release figure, and the Iron Patriot is the store exclusive.  Bleh. The figure stands roughly 7 inches tall, and has 26 points of articulation.  The sculpt is accurate to the suit design from the movie, although it’s a bit thin in the waist area.  All the details are nicely done, but some of the armor details are slightly soft.  The paint is adequate.  It’s not that it’s bad, it’s just a bit bland.  It’s lots and lots of greys and silvers.  War Machine comes with a stand that resembles a stall from the hall of armor, and an alternate head sans faceplate, so you can see Rhodey’s face.  The stand is nice, but it takes up a lot of space.  The extra head is cool, and the Don Cheadle likeness is pretty good, although I feel like his skin tone is a tad light for Cheadle, and the eyes are a bit on the wonky side.

THE ME HALF OF THE EQUATION

Yeah, so right off the bat, this is a figure that ties into a movie where the look presented doesn’t appear in the film.  I like the sculpt, but I think with the more exciting Iron Patriot paint scheme, this figure would pop a lot more.  They actually did make an Iron Patriot from this sculpt, but it was a Disney Store exclusive, and is difficult to find.  And this figure was $12.  At $12, this figure is pretty good.

#0059: Rescue & Robot Hulk

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

RESCUE ARMOR IRON MAN & ROBOT HULK

MARVEL MINIMATES

Today marks the final entry from the most recent Toys R Us exclusive series of Diamond’s quite expansive Marvel Minimates line.  For the last review, I’ll be looking at not quite Iron Man, and not quite the Hulk.  So, maybe it’s not quite a review…

THE FIGURES THEMSELVES

These two were released as part of the 17th Toys R Us exclusive series of Marvel Minimates.

RESCUE ARMOR IRON MAN

First up, it’s Iron Man…according to the box anyway.  In actuality, it’s Pepper, Tony’s on-again-off-again-love-interest.  She recently (okay, in the last five years or so) got her own suit of armor and took up heroing under the name “Rescue.”  I guess Toys R Us wasn’t interested in a figure just called Rescue, but add Iron Man to the end, and their on board!  That ends up being a little awkward for Pepper, who really doesn’t qualify as Iron MAN, but if anyone can bend gender stereotypes, it’s Pepper Potts!  The figue is built on the basic Minimate body, with a few sculpted add-ons, so she’s got 12 points of articulation and stands about 2 ½ inches tall.  She’s got sculpted boots and gloves, as well as a slip over mask.  All these pieces have been used before, but are put to a good effect.  The paint on Rescue is quite well done, with no noticeable slop, smudges or fuzziness, and lots of fine detail work.  The metallic red and silver are also nice and consistent.  Rescue includes a blast off stand, a clear display stand and a spare hair piece to display Pepper unmasked.  That last accessory is great because, Pepper’s unmasked face is one of the highlights of the figure.

ROBOT HULK

Next, it’s Robot Hulk, the robot approximation of Hulk.  Yeah, it’s a complicated concept.  He’s based on…the minds of toy makers everywhere.  Robo Hulk is based on the basic Minimate body with sculpted parts, so he’s got 12 points of articulation and stands a little over 2 ½ inches tall.  He’s got sculpted hair, torso cover, hands, thigh covers and feet.  All but the hair were previously used on the Marvel vs Capcom Sentinel, and the hair is taken from one of the recent Colossuses.  The reuse is warranted and gives him a nice angular, robotic look.  The paint work is all nice and sharp.  Like yesterday’s Venom, Robot Hulk also has a whole nother Minimate underneath all of his sculpted parts.  This time around, it depicts a terminator like rob-suit, piloted by long-time Hulk and Iron Man foe the Gremlin.  It’s a great touch and really adds a lot to the figure.  Robot Hulk is topped off by a clear display stand.

THE ME HALF OF THE EQUATION

As with the rest of this series, the two were ordered from TRU’s online store, with a shocking amount of ease.  Rescue gives us a great comic styled Pepper, which has been a long time coming.  Robot Hulk is kind of filler, but he’s really cool filler, and his importance is helped by the little image of Gremlin piloting, kind of making this a new character.

#0048: Iron Man Mark VI – Hologram

Posted by Ethan Wilson in Reviews and tagged with , , , ,

IRON MAN MARK VI – HOLOGRAM

IRON MAN 2 (HASBRO)

So, wacky variants.  They tend to be a staple of action figure lines, particularly those that are based on films and such where the main character might only have one or two looks.  And that’s nowhere near enough for toy makers.  They have to make the kids buy them all!  They reached their heyday back in the 90sm most prevalently with Batman, but they still appear from time to time.

Case in point with today’s figure in question: The Holographic version of Iron Man’s Mark VI armor.  He hails from Hasbro’s tie-in line to 2010’s Iron Man 2.

THE FIGURE ITSELF

The Holographic Mark VI, or HMVI as I’ll be referring to him, was released as part of a K-Mart exclusive three pack of armors.  It featured a War Machine in camo, and an Iron Monger painted to look like the Hulkbuster armor, but I don’t have either of them.  HMVI is not based on a look from the Movie, instead being totally made up so that the toymakers could make another figure out of the same Mark VI mold.  He stands just shy of 4 inches tall and has 18 points of articulation.  The sculpt is exactly the same as that of the basic Mark VI.  The difference is that he was molded in clear blue.  He features some minor paint to give him some kind of a crosshatching detail, which is actually pretty cool.  He features no accessories, which is a bit of a bummer, but since Hasbro has a tendency to just throw in a dumb missile launcher, I don’t feel like I’m missing out on anything.

THE ME HALF OF THE EQUATION

I bought this figure for one and only one reason:  it looked really cool.  And it still does.  Sometimes, you just have to buy a toy because of how awesome it looks.  Perhaps the toy companies are on to something…

#0047: Iron Man & The Thing Minimates

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

IRON MAN & THE THING

MARVEL MINIMATES

Look!  It’s more Minimates!  Yes, I’ll be looking at even more Minimates, once again from the Marvel line.  This time I’ll be looking at a set from the “Best Of” sub series.  The idea behind this sub set was keeping the definitive versions of the main Marvel Heroes and villains on the market, while trying to produce the best possible minimates of those looks.  I’ll be taking a look at Iron Man and the Thing from that line.

THE FIGURES THEMSELVES

These guys were released as part of the first “Best Of” series of Marvel Minimates.

IRON MAN

First up is Iron Man.  He’s depicted in his classic red and yellow armor he wore for most of the 60s and 70s.  Unlike previous minimates of this particular look, the yellow is actually yellow on this one, instead of Gold.  Iron Man is built on the basic minimate body, so he’s about 2 ½ inches tall and has 14 points of articulation.  He features a sculpted helmet and belt, as well as sculpted boot and glove cuffs.  Paint-wise, the details are all well done, though some of the red paint is a little thin in places, and seems a bit fuzzy on the edges of the boots and gloves.  But since those are meant to be covered by the cuff pieces, it’s not really an issue.  Iron Man also features an extra left hand in a repulsor pose, a flying stand, and a hairpiece to display him sans helmet.  These are all reused pieces, but they work well here.

THE THING

Next is Benjamin J Grimm, The Ever-Lovin’ Blue-Eyed Thing.  Ben’s look is a bit more difficult to nail down than IM’s.  I think it’s meant to be Ben in his look from the mid 2000s, after he switched back to shorts from pants, but I can’t be certain.  The “4” on the belt buckle is throwing me off.   Anyway, he’s built on the basic minimate body, but with sculpted hands and feet instead of the regular ones.  As such, he stands a bit taller than IM and has 12 points of articulation.  In addition to the sculpted hands and feet, Ben’s other sculpted pieces are: Headpiece, upper arms, torso, waist and upper legs.  These are all slip over pieces, and have been used on previous Thing figures.  With that many sculpted pieces, the paint work on Ben is minimal.  He’s got detailing on his face, and on his belt and that’s about it.  They’re both clean and well done.  Ben also includes a clear display stand.

THE ME HALF OF THE EQUATION

I didn’t buy this set when it was initially released, as I already had a few classic Iron Men, and my default version of the Thing is the look John Byrne gave him in the 80s.  However, my comic book store was having a sale on minimates, and had these guys for about 40% off, so I decided to pick them up.  While the Thing is still not my go to, I think the Iron Man may very well become my new default Iron Man.

#0042: Tony Stark & Heartbreaker

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

TONY STARK & HEARTBREAKER

MARVEL MINIMATES

Hey, look!  It’s review number 42!  And it’s doubly funny, because the not only  is 42 the answer to life, the universe, and everything, but it’s also a significant number in this year’s Iron Man 3.  Today, I’ll be taking a look at another selection from my large Minimates collection.  This set once again comes from the Marvel Minimates line.  It’s Tony Stark and the Heartbreaker from the Iron Man 3 tie-in Minimates.

THE FIGURES THEMSELVES

These two were released as a Toys R Us exclusive set in Diamond’s Iron Man 3 series.

TONY STARK

Tony is depicted in his workshop gear from the film.  He’s built on the basic Minimate body, so he stands just over 2 inches tall and has either 14 or 12 points of articulation, depending on which pair of feet you decide to display him with.  He features sculpted hair, boots and gloves.  The hair piece is a generic piece that’s been used a few times before, but it’s accurate to Tony’s look from the film, so it works.  The boots and gloves are reused from the Mark 42 armor from this same wave of figures.  It’s a sensible reuse, given that they were just the boots and gloves from the Mark 42 in the film anyway.    Tony also includes a spare set of hands and feet.  They’re the basic Minimate pieces, molded/painted in the appropriate colors.  The rest of the detail on the figure is conveyed through paint.   The face is an okay depiction of RDJ, and is unique in that it has him wearing his control visor.  The detailing on the torso is also really cool, especially the texturing on the gray parts of the shirt.  Tony’s rounded off by a clear display stand.

HEARTBREAKER

The Heartbreaker armor is one of the many armors shown during the climactic battle in the film.  It’s a unique look, and one of my favorites from the film, so it was a good choice for the line.  The figure’s built on the base Minimate body, but with newly sculpted upper arms and legs.  He stands about 2 inches tall and has 12 points of articulation due to his sculpted boots.  Heartbreaker features a sculpted helmet, torso-cover, waist-armor, gloves and boots.  As far as I can tell, everything but the boots is a new sculpt.  The sculpt is nice and clean, if a bit bulky in places.  The paintwork is a bit less detailed than most Minimates, relying mostly on the sculpted pieces.  Heartbreaker also includes a hair piece to trade out with the helmet to show the Tony head underneath.  It’s the same piece as the one featured on the Tony in this set which makes for good consistency.  Like his pack mate, he’s rounded off by a clear display stand.

THE ME HALF OF THE EQUATION

These were yet another TRU.com purchase.  Like many TRU purchases, it was far from smooth.  In fact, if it weren’t for a very helpful poster on the Minimate Multiverse, who posted the SKUs for each set in the wave, I wouldn’t have been able to get this set, because TRU.com had every set in the wave labeled “Iron Man 3 Minimates Assortment”!  I’m really glad that I did get this set because I think it might be my favorite from the Iron Man 3 line.  In fact, one could say not getting this set would have been …heartbreaking!(Badumsh)

#0037: Mandarin & Dreadnought

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MODERN/CLASSIC MANDARIN & DREADNOUGHT

MARVEL MINIMATES

Today, it’s another look at the behemoth that is Marvel Minimates!  This time, we’ll be looking at Iron Man’s number one foe Mandarin in both his Modern and Classic looks, as well as his villainous robo-minions, the Dreadnoughts.

THE FIGURES THEMSELVES

The two Mandarins and the Dreadnoughts were released as part of the 36th series of Marvel Minimates, in order to tie in with 2010’s release of Iron Man 2.  Modern Mandarin was the regular set, with the Classic version as the one-per-case variant.

MODERN MANDARIN

First up, it’s the look that most would consider the definitive Mandarin, the “Modern” version.  This figure is based on his appearances from roughly the early 90s onward.  As usual for the line, Mandarin is built on the basic Minimate body.  He stands roughly 2 ½ ‘’ tall and has 14 points of articulation.  Instead of regular hands, Mandarin features sculpted claw like hands featuring his ten rings.  Mandarin also has a sculpted hair piece, robe, and sash.  I believe the sash is a reuse from an earlier figure, but the robe and hair are new pieces.  They are well done enough, though with the robe on, Mandarin is pretty much limited to standing with his arms raised, due to the robe’s solid construction.  This is less an issue with the figure itself, and more an issue with translating the design.  The ToyBiz Marvel Legends figure based on this design has the exact same issue.  Regardless, the robe can be removed, revealing a completely detailed torso underneath, if you desire to show off Mandarin sans robe and shirtless.  Whatever floats your boat…

CLASSIC MANDARIN

Next is the alternate look for the Mandarin.  This is the original design for the Mandarin from when he first appeared in the 60s.  I’m much more of a fan of this design and the resulting figure.  I know some people would find this design cheesy, but that’s the Mandarin for me.  Over the top cheesiness.  The figure’s the same basic body, standing about 2 ½ “ tall and featuring 14 points of articulation.  This Mandarin features the same sculpted hands as the previous one, which is fine as they suit the same purpose here.  Classic Mandarin features a sculpted mask, cape, wrist bands, sash/tunic combo, and cape.  All but the mask is reuse here, with the cape comic from Mephisto, the writ guards from Ocean Master, and the sash from Dr.  Strange.  This isn’t a bad thing, though, because all the reused parts work very well for their intended purpose.  The mask is well done, and accurately depicts Mandarin’s mask from the early comics.  The detailing on the figure is nice, especially the face, which has a nice crazed expression which really works great for the character.

DREADNOUGHT

Last up is the robotic Dreadnought!  A dreadnought was included with both versions of the Mandarin, which is great for those who want to do the whole army building thing.  Like the other two figures, the Dreadnought was built on the basic Minimate body.  He stands about 2 ½ “ tall and features 14 points of articulation.  In place of the basic parts, the Dreadnought features a sculpted head and hands.  The head is an all new piece, but the hands are a reuse from Viggo the Carpatian.   The Dreadnought also features a set of sculpted boot tops which I believe are a reuse from the Dark Avengers Ares.  The paint is relatively basic, but it is well done.  Plus the metallic blue is just so awesome!

THE ME HALF OF THE EQUATION

These guys were picked up at their time of release from my local comicbook store, Cosmic Comix.  I think the Mandarin is meant to be the main draw of these sets, but I actually really like the Dreadnoughts a lot.

#0006: Avengers First Appearance Boxed Set

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , , , , ,

ANT-MAN, WASP, HULK, IRON MAN, THOR, & GIANT-MAN

TOY BIZ AVENGERS FIRST APPEARANCE BOXED SET

Now a days, pretty much every one knows who the avengers are, but back in the mid 90s, they were  kind of obscure outside of the comic collecting community.  So, sets like the one I’m reviewing today were kind of a big deal.  I’ll be taking a different approach to these, and reviewing the whole set all in one shot.

ANT-MAN

THE FIGURE ITSELF

First up is Ant-Man, the first of the two Hank Pym figures included in this set.  He’s a good deal smaller than all of the other figures in the set, but that’s to be expected.  He’s got 7 points of articulation, which is good for the scale.  The most impressive part, I feel is the removable helmet, which is astounding on a figure this size.  And it looks great to boot!

WASP

THE FIGURE ITSELF

Next is Hank’s girlfriend, then wife, then ex-wife, then it got really complicated, Janet Van Dyne, aka The Wasp!  The Wasp is depicted in her original uniform, as is appropriate for an Avengers #1 set.  It’s not my favorite look of hers, but it’s not bad.  The figure shows the look off pretty well.  Wasp is about the same height as Ant-Man and has pretty much the same articulation, though his works better.  It would have been nice to get a regular sized Jan as well, but this one worked fine.

HULK

THE FIGURE ITSELF

Next is the jade giant, the Incredible Hulk.  Hulk is in his shown here wearing his Avenging shorts (I mean, that has to be their purpose, right?  Because we only ever see him wearing them with the Avengers).  Hulk is well sculpted, but the paint leaves a little bit to be desired.  Or more specifically the choice of plastic color.  They went with this sickly looking pale green, which doesn’t befit Dr Banner at all.  He looks like he needs a little sun.  Overall, a fine figure.

IRON MAN

THE FIGURE ITSELF

Onto the armored Avenger, Iron Man.  He’s depicted in his second suit of armor, the same as his original, but gold plated.  To emulate the coloring properly, Toybiz offered two versions of the set.  One came with a Vac Metalized shiny, gold chromey paint job, and the other came with a dull, brozish style of coloring.  My original was the dull version, but when his helmet got stepped on and crushed, I upgraded to the shiny one, found loose at a toy show.  Oh, and that helmet I mentioned?  Yeah, it was removable, which was definitely this figure’s coolest feature! Just look at Tony’s handsome mug!

THOR

THE FIGURE ITSELF

Oh boy.  This Thor.  Man this Thor.  This was not a good Thor.  Though, amazingly, it was the only Thor figure I owned until late into the Marvel Legends line.  But it’s not a very good figure.  The Chrome helmet and chest-circle-thingies (technical term!) are cool, and the basic body’s okay.  But then you look at that face.  Oh, man that face.  It’s bad.  And to top it all off, he has this weird poofy cloth cape, which pretty much never looked right.  I’m fairly certain this figure is the reason why I didn’t like Thor until the movie came out in 2011.

GIANT MAN

THE FIGURE ITSELF

Lastly, we have what I consider to be the best figure in the set:  Giant Man!  He’s the second version of Hank Pym we’re looking at in this set, and he’s actually not quite accurate, what with Hank not being Giant Man until Avengers # 2, but man this is a cool figure, so I’m willing to overlook it.  The coolest thing about this figure, I feel, is the size.  He had some serious scale on his side.  Plus he’s just about a picture perfect representation of Hank in this costume.  The paint is sharp, the sculpt is good.  This figure’s got some serious win on his side!  He once had a set of antenna, but they fell of after a few months of play.  But at least they both fell off, preserving the symmetry.

THE ME HALF OF THE EQUATION

These figures are pretty important to me, because they represent a first for me:  waiting for a figure to be released.  In the early days of the internet, I remember seeing the control art for these guys on Raving Toy Maniac.  I was absolutely thrilled.  I printed it out, and made paper figures to hold me over.

I finally saw these figures on an end-of-the-school-year shopping trip with my Nanna.  They were on an end cap and I eagerly picked them up and informed her that I didn’t need to look at anything else.  I was done.  She didn’t really get it.  Who were these characters?  Didn’t I want a Spider-Man, or a Batman instead?  Nope.  I wanted my Avengers and that’s what I got.  And man was it a great day!