#1587: Green Lantern

GREEN LANTERN

JUSTICE LEAGUE (MATTEL)

When assembling the final line-up for the Justice League animated series, the creators were faced with two slight issues.  First, the traditional roster of seven members was, apart from one woman and one alien, all white guys, which isn’t particularly diverse.  Second, the traditional roster was made up of characters with very set roles in the public eye, which doesn’t necessarily allow for lots of creative freedom in storytelling.  They solved both of these problems with a minor line-up tweak.  Founding member Aquaman was replaced with the lesser known Hawkgirl, and Green Lantern Hal Jordan was replaced with his less explored successor John Stewart.  It proved a success not just for the creators, but also for the two characters chosen.  For John Stewart in particular, it took him from being probably the least known of the Earth-based Lanterns to being THE Green Lantern for an generation of DC fans.  Sadly, he’s somewhat fallen out of fashion again, but let’s remember back to the times when he was at the top, shall we?

THE FIGURE ITSELF

Green Lantern was part of the first series of Mattel’s Justice League line.  Alongside Superman and Batman, he and Flash were definitely the lesser knowns, and as such was the short packs of the lot, which made GL a little hard to track down at first.  Fortunately, the popularity of both the show and the character saw this particular figure getting more than a few re-releases over the years.  The figure stands just shy of 4 1/2 inches tall (GL was the shortest of the founding 7 members, so this was accurately depicted here), and he has 5 points of articulation.  His sculpt was, like all of the Series 1 and 2 figures, done by DC Direct, and then handed over to Mattel when they won the DC license.  It’s really just a shrinking down of DCD’s GL Maquette from the time of the show’s premier, but that was a solid rendition of the character, and it still is on this figure.  The articulation’s not really good for a whole lot, and was certainly a low count, even at the time.  Nevertheless, it was consistent with the prior Kenner/Hasbro animated offerings, and it was really the best that could be hoped for in terms of preserving the aesthetics of the animated design.  As far as paintwork went, GL was pretty straightforward.  I always felt the main green could have stood to be a little lighter (and, going by its shading on the show, it probably should have been metallic), but it’s ultimately a decent offering.  One minor flaw?  His eyes have black pupils.  In the show, they were green, showing the effects of the power ring.  Future figures had this corrected, but this guy just has green irises instead.  Green Lantern was packed with a blue stand, which connected with those of the other main League-ers, to spell out the team’s name.  Lantern gets “JU” so he’s meant to go at the front.  It’s a decent piece, but a bit cumbersome for display purposes.  Sadly, that was all he had; no power battery or constructs for this release.

THE ME HALF OF THE EQUATION

While I was able to score a Flash figure pretty quickly when these figures first hit, GL proved to be slightly more difficult to find.  Fortunately, I was able to get some assistance from my friend Cindy Woods, who tracked down a GL for me in fairly short order.  He’s not the greatest John Stewart figure (though he’s certainly a large improvement over the last one I looked at on this site), but he was good for the time, and has remained a favorite of mine.

#1494: Firestorm

FIRESTORM

DC ICONS (DCC)

It is only now, on Black Friday, that I’ve realized that it might have been more clever to review Black Adam today instead of two weeks ago.  See, because they both have “Black” in their name.   Pretty good, right?  You’re just blown away by how clever I am, right?  True genius.  If only I’d thought ahead.  Instead, here’s Firestorm, an unnatural fusion created by ungodly science.  That’s sort of like Black Friday, right?

THE FIGURE ITSELF

Firestorm was released in the fourth series of DC Icons as figure 16, making him the final figure in the assortment numerically.  He’s listed as being based on “Justice League,” which isn’t the biggest help in narrowing things down.  Presumably, this refers to when Firestorm joined the team a few years ago during Ivan Reis’s tenure as the artist.  He’s sporting his second New 52 era look, which first showed up in issue #0 of Fury of Firestorm.  It was a return to form after the more divergent split looks from the initial launch.  It keeps all of the important classic Firestorm details, while still being “modern” so I think it’s not a bad choice at all.  The figure stands 6 1/2 inches tall at the top of his flame hair (so, just over 6 without it) and he has 31 points of articulation.  Series 4 marked the first official move to the “new” Icons scale, so he’ll fit in with the Rebirth boxed set.  He also features the drop hips, which add to his mobility quite a bit.  Firestorm’s sculpt is really one of the nicest to come out of Icons.  It’s really sleek and clean and captures the character very nicely.  The details are all very sharp, and he has a nice, balanced set of proportions.  If I’m getting super nit-picky, his shoulders seem perhaps a touch narrow, but that’s really reaching.  The paint is similarly top-notch.  The metallic red looks really sweet, and the clear plastic works really well for the flames.  The details are clean and crisp, and he just looks very polished.  He’s packed with a spare set of open-palmed hands (in a translucent yellow), as well as a spare set of forearms with a nuclear effect (in the same translucent plastic).  They swap in and out pretty easily, and they make for a decent selection when posing him.

THE ME HALF OF THE EQUATION

I ended up tracking down Firestorm on the recommendation of my friend Matt Thorpe, who I had run into at Barnes & Noble when I grabbed Lex and Black Adam.  He’d mentioned how much he liked the figure, so it made it’s way to the top of my list.  I grabbed the last one in stock at Cosmic Comix during their 26th Annual Annual Sale, meaning I got him for a pretty sweet 40% off of his original price.  I’m glad I picked him up because he’s definitely one of the best figures this line produced, and probably the best figure Firestorm’s ever gotten!

#1459: Justice League Rebirth Set

SUPERMAN, BATMAN, WONDER WOMAN, FLASH, GREEN LANTERN, AQUAMAN, & CYBORG

DC ICONS (DCC)

It’s Friday, which means it’s time for another entry in my latest recurring feature…F-DC F-icons Fridays?  Yeah, there’s a name that’s catchy and rolls right off the tongue.  Not content to just review one DC Icons figure a week, I’ve decided to continue my descent into madness and review seven of them in one day.  And you all get to be here for that descent.  Don’t you just feel so special? Without further ado, let’s look at the Justice League!

THE FIGURES THEMSELVES

Superman, Batman, Wonder Woman, Flash, Green Lantern, Aquaman, and Cyborg were released in March of this year in the “Justice League Rebirth” boxed set, as part of the DC Icons line.  The set’s actually been in progress since mid-2016, when it was initially shown as a New 52-themed set, before being updated to reflect the characters in their most recent looks (for the most part), and tying it into the DC Rebirth relaunch.

SUPERMAN

This figure’s my primary reason for grabbing this set, since Rebirth actually got me reading Superman and Action again.  This figure actually just saw a single release a few weeks ago, which looks to be identical, apart from the packaging.  The design of this figure comes from the initial Rebirth books, after the older Post-Crisis Clark took over the identity again.  It’s already been replaced by a tweaked design, but it’s not too far off.  I actually quite like this design; it’s not the classic look, but it’s way ahead of the other post-New 52 looks.  It’s still weird to see a Superman without the red shorts, but I think making his boots blue helps to alleviate some of the color imbalances caused by that.  The figure stands 6 1/4 inches tall and has 29 points of articulation.  Superman follows the “new” scale for Icons, meaning he’ll fit in best with figures from later in the line’s run.  He’ll also fit with some Marvel Legends depending on how much of a stickler you are for inter-character scaling.  He’s a little smaller than a Legends figure built on the Reaper body (as seen in the comparison pic with Cap).  Since he’s so sized up, he can’t really use any pieces from the first Icons Superman, making this figure an all-new sculpt.  It’s not bad work at all.  The build of the figure seems about right for Supes, and the proportions are all pretty balanced.  Detailing is all pretty clean and bold as well.  The head is pretty solid too; it’s got a nice friendly expression that seems right for Clark.  It feels maybe a touch wide, and perhaps a bit young for the more experienced Clark Kent this figure is meant to represent, but by and large I find myself really liking it.  The cape is made from a soft plastic, and it’s very nicely done.  After years of Mattel capes that have to be attached with a huge brick that utterly ruins the flow, this is a very refreshing piece.  In terms of paint, Superman is decent, if perhaps not fantastic.  The basic colors are all good matches for the source (the blue is a touch dark for my taste, but that’s accurate) and he looks pretty slick overall.  My only real issue is with the face, which just seems a little bit lopsided.  It’s the sort of thing that looks totally fine from most angles, but really goofy if you catch it the wrong way. Still, good work overall.  Superman includes no accessories.  Of course, that’s true of the entire set.  At least Supes doesn’t feel too light without the extras.

BATMAN

This guy also saw a single release, at the same time as the Superman figure.  It’s hardly a shock, what with it being Batman and all.  Batman is also sporting his look from Rebirth, but he’s been fortunate enough not to have it already change on him.  It’s another decent design.  It doesn’t speak to me quite as much as the Superman design, but that’s less about any particular element pulling me out, and more about it not being too terribly different from all the other Batman designs in recent years.  I can point out what’s different between this and the New 52 design if put on the spot, but they’re fundamentally the same.  Well, this one has less tactical-tech lines, which is certainly a plus.  The figure is 6 1/4 inches tall and he has 29 points of articulation.  Batman’s maybe a smidge taller than Superman, depending on posing.  I generally like for Bruce to be a little shorter, but it’s easy enough to have Clark standing straight and Bruce slightly hunching.  The important thing is that this Batman is taller than the Icons Nightwing, which can’t be said of the first Icons Batman (which is absolutely dwarfed by this release).  The very first prototypes of this set showed Batman using quite a few pieces from the older figure, but this guy ended up as a totally new sculpt.  It has its pluses and minuses, to be sure.  As a whole, I think it’s a strong sculpt, and it does a good job of conveying a modern era Batman.  He’s got a good, solid build, and the details on the costume appear to be more or less accurate to his new design.  The mouth seems ridiculously pouty, but Batman is the king of brood, so I guess that just goes with the territory.  His head is set a little higher on the barbel than other Icons figures, which can look a little off in straight standing poses, but actually affords him a good deal more range on his neck joint, which is pretty nice for a guy who does a lot of hunching.  The figure’s topped off with another nicely rendered cape, which has a flow to it that is just as well-crafted as, but completely unique from, Superman’s.  Paint on Batman is very solid work.  Nothing seems out of place like on Superman, and everything’s very bold and clean.  Perhaps the purple could be a little more noticeably different from the black on the cape, but that’s a very minor complaint.  Batman feels a little more hurt by the lack of extras; at the very least a batarang or something would have been nice.

WONDER WOMAN

This set’s Wonder Woman was actually the first in the line, though her single release wasn’t far behind. Unlike the last two, Wonder Woman’s single release was quite a bit different, leaving this one still exclusive to the larger set.  Wonder Woman was another big motivator for me buying this set since, like Superman, Rebirth got me reading her title again.  She’s sporting her first Rebirth look, which was sort of an update on her classic look, with a dash of the movie design thrown in.  She’s switched to something even more movie inspired since, but as with Superman, I sort of prefer this one.  The figure stands almost 6 3/4 inches tall and she has 29 points of articulation.  Yes, you read that height correctly; Wonder Woman really is almost a half an inch taller than Superman and Batman.  I’m not inherently opposed to her being taller than the other two (my favorite take on Diana is most certainly Darwyn Cooke’s, and he drew her as an inch or so taller than Clark), but this feels like a little much.  I think my issues ultimately stem from how the height is distributed; her proportions are a little out of whack, so her legs, specifically her thighs, end up taking most of the height and looking a bit longer than they should.  There’s a similar issue with the arms, where the forearms and biceps look really long relative to the shoulders and torso.  If you look at the comparison between her and the other two, you can see that despite her pelvis being a good half-inch higher than the other two, the hands all end in the same spot.  It’s not awful, but it does look a little off, at least in comparison to the other figures in the set.  On the plus side, it does make her the one figure in this set that fits in with Legends without any fudging.  Regarding the quality of the sculpt on its own, this figure’s a bit tricky.  Based on photos online and my initial reaction right out of the box, I was all ready to hate on the sculpt.  But then I took her out, and was messing with her for the photos and such and I realized it’s actually not a bad sculpt at all; it’s just an exceptionally hard to photograph one.  This figure looks very different based on the angle you catch her from, and she really doesn’t look great viewed from above.  But, head-on, she actually looks rather nice.  Yes, the proportions are still a little off, there’s no denying that, but I like more about this sculpt than I dislike.  Given the right pose, she actually looks pretty great, and given just how bad a lot of prior Wonder Woman figures have been, that’s very much a compliment. Wonder Woman’s paint work is definitely on the better end of things.  From what I’ve seen, there’s a bit of variance on the face, but mine seems to have turned out alright, and I really dig how bright all the colors are.  I didn’t know colors were allowed to go that bright on a DC figure.  Wonder Woman gets hit pretty hard by this set’s lack of accessories, because it means she loses her defining weapon: a big ol’ sword!  I jest, of course.  Who would ever think her defining weapon was a sword?  That’s just silly.  She’s actually missing her lasso, which is a real staple of the character, and a rather glaring omission.  It would have been nice to at the very least have it coiled up hanging from her belt.

THE FLASH

Flash is one of the two figures in this set who I’ve looked at an Icons figure of before.  I was overall impressed by the Series 2 figure, so I wasn’t really in the market for another, especially not one based on his super line-y New 52/Rebirth design.  And yet, here we are.  Flash’s design was essentially unchanged for Rebirth; the only noticeable difference here is the lack of chin strap, but a quick Google search shows that totally varies from artist to artist.  The figure stands 6 1/4 inches tall and has 31 points of articulation.  Flash’s sculpt is all-new to this figure, but looks to have used the prior figure as a starting point at the very least; the musculature and sizing are all about the same, but the specifics of the costume have changed.  All of the yellow lines are etched into place, and there’s added details on the boots.  The head is a completely original piece, totally different from the Series 2 figure.  Since the head was the only part of that figure I had an issue with, I was intrigued by this one.  I’m happy to say, I find this one to be a serious improvement over the original.  The yellow lines aren’t etched into the head, so there’s a part of me that’s tempted to try and remove them so I can put this head on the old body, because I like it that much.  The paint work on Flash is mostly good, aside from one glaring issue:  he’s got a big spot of missing paint on the right side of his chin.  It’s a pretty noticeable flaw, and I’m definitely going to have to break out my paints to fix it.  Not the sort of thing I like having to do right out of the box, but I feel confident this is a one-off.  The lack of accessories for Flash is a bit less of an issue, but I do wish his default hands were flat running hands instead of fists.

GREEN LANTERN

GL is the other character for whom I’ve already reviewed an Icons release, and this figure’s even less different than Flash.  At first glance, this is a straight re-release of the deluxe Hal Jordan figure from Series 2.  However, that’s not quite the case.  You see, that figure was 6 inches tall, but this one is 6 1/4.  He’s also got tweaked hips to add the drop-hips that the rest of the set feature, so my first thought was that they’d simply sculpted new thighs with added height. Upon closer examination, I found that the entire figure has actually been ever so slightly enlarged, in order to bring him into scale with the rest of the set.  What’s more, the details of this figure’s sculpt are a lot crisper than those of the earlier figure, and the green has been changed to a more metallic sheen.  I loved this figure the first time I got it, and I still love it here.  Of course, I’m also frustrated by it, because it’s just different enough that it’s not a straight duplicate, so now I have to keep it.

AQUAMAN

You know the old saying: “if an Aquaman figure is released without a trident, does he make a sound?”  …Maybe that’s not quite it.  Regardless, here’s this Aquaman figure.  He’s based on the Rebirth design, which isn’t that much different from his classic look, apart from the gold around the collar and the lack of black shorts.  This figure stands about the same height as all of the other figures in the set, and has 29 points of articulation.  He’s really just a reworking of the single-release Aquaman, though, like with GL, he seems to have been scaled up ever so slightly.  The real difference between the two Aquamen is the head.  I can’t say I’m much of a fan of this one.  It looks fine on the prototype and all, but something was definitely lost in translation, leaving him looking rather goony.  It’s possible it’s just the paint making it look that way, though.  The rest of the sculpt is pretty top-notch.  The build is appropriate for him, and I really like the detailing on the scales of his shirt.  His paint is fairly decent; the colors are bright, and, apart from the odd placement of his eyes and a little bit of bleed over from his belt, it’s fairly well applied.  Aquaman’s lack of accessories here means that he doesn’t include his trident.  And I’m okay with that, because despite what pretty much every Aquaman figure ever would have you believe, he doesn’t really use a trident all that often.

CYBORG

This figure’s presence in this set frustrates me, because it sort of continues a persistent problem I’ve had with DC for several years now.  They keep shoving Cyborg into the Justice League, and it just upsets me.  I like Cyborg.  I like the Justice League.  I don’t really like Cyborg in the Justice League.  Especially when it’s at the cost of Martian Manhunter as a member, which it almost always is.  And that’s what the case is here.  In a seven figure Justice League set, I kind of expect a Martian Manhunter.  But noooooo.  No, in this set, we got Cyborg.  Cyborg who also got a single release with accessories.  Instead of Martian Manhunter, who was completely left out of the line, leaving my Icons Justice League sadly incomplete.  And of course, now I have a Cyborg, but not Titans to go with him, meaning that’s another incomplete team.  Bleh.  I’m sorry, all that ranting is largely to do with the fact that I *actually like* this figure.  Quite a bit, in fact.  His sculpt, even though it’s based on a more modern Cyborg than I tend to go for, is top-notch.  It’s sleek, well put together, and just plain cool looking.  He’s got 31 points of articulation, and it all works really, really well.  The joints are smooth, and the mobility is pretty sound.  He’s probably one of the best in the set, posability-wise.  Perhaps the only drawback to the figure proper is his lack of extras, since his forearms have clearly been designed to swap out for other arm attachments.  Just one of those would have been really cool.

THE ME HALF OF THE EQUATION

After picking up Nightwing and Supergirl, and finding out that just about everything I wanted from Icons was cancelled, I was admittedly a little bummed.  That being said, I recalled that this set had been released, and I had checked it out a few times, before ultimately deciding it was a little bit on the pricey side for me.  I still really wanted that Superman, though, so I was excited to hear he was getting a single release.  I was less excited to hear that he was going to run me almost $30 and feature no additional accessories.  It was around this time that I discovered that Barnes & Noble’s website had marked this set down to half of it’s original value, and were also offering free shipping and $5 off orders over $25.  The final cost was $45, which is $6.43 a figure.  And that’s an amazing deal.  Superman’s awesome, as is Batman.  Wonder Woman’s better than I expected, if not perfect.  Flash isn’t my ideal costume choice, and has that one annoying paint flaw, but is a very good figure.  Green Lantern’s not the total repeat I expected, and fixes a few minor issues with the original.  Aquaman’s head sucks, but the single release has a spare head I can toss on the otherwise solid figure.  And I ranted a bit about Cyborg’s spot in the set, but he’s still a very, very well crafted figure.  If you want to give Icons a chance, I heartily recommend this set, and feel obligated to inform all of my readers that it’s still available at the discounted price on barnesandnoble.com.

#0977: Flash

FLASH

JUSTICE LEAGUE (MATTEL)

FlashJLU1

Yeah, so I’m kinda running out of things to say about the DCAU. It was really good. Far better than anything else DC’s done in a very long time. There, I got that out of the way. When the DCAU’s fourth series, Justice League, premiered most of the cast were not household names. While the Flash was decently well-known, the show undoubtedly contributed to character’s current state of popularity. During Hasbro’s run with the DC license, they only released three Flash figures over the course of a decade (and two of them were the same figure with a slight change in paint). Thanks to Justice League , when Mattel took over, Flash was amongst the earliest figures they released. I’ll be looking at that particular figure today.

THE FIGURE ITSELF

FlashJLU2Flash was released in the first half of the first series of Mattel’s Justice League line, alongside Superman, Batman, and Green Lantern. Both he and Green Lantern were short packed to two per case in initial shipments, so they were initially quite scarce. However, this basic Flash figure was released numerous times over the course of Mattel’s later Justice League line with virtually no changes. The figure stands 4 ½ inches tall and has 5 points of articulation. That articulation count was low even in 2002 (heck, ESPECIALLY in 2002, since that’s when Marvel Legends was started), but it both kept the figures somewhat consistent with the Kenner/Hasbro animated figures that preceded, and also preserved the figure’s overall aesthetic. The sculpt for Flash (and all of the other initial Justice League figures) was done not by anyone at Mattel, but rather by DC Direct (prior to Mattel’s holding of the DC license), who down-scaled their larger scale animation maquettes for the first seven figures. The end result is a figure that is quite faithful to Flash’s depiction on the show…mostly. Something’s always bugged me about the head, and I’ve never been quite able to put my finger on it. Other than that, the figure’s spot-on though. Flash’s paint is fairly simple. He’s molded in red, with painted details for the various yellow and white bits, as well as his face. The application is generally pretty clean, though he does have a bit of slop around the edge of his mask. In his initial release, Flash was packed with one of the light blue connecting stands that the first seven figures all came with, as well as a lenticular trading card.

THE ME HALF OF THE EQUATION

Boy were the Justice League figures a long wait. Even after they finally made it to shelves (a year after the show’s premier), getting a hold of them, especially the short-packed Flash and Green Lantern, was no easy feat. I ended up lucking into Flash: there was a comic book store near the church where my aunt was getting married. My dad and I went there to kill some time and the store had just gotten in their case of these figures and had one each of the short-packs. He’s not a perfect figure, but he was the figure I wanted, and he was one of my favorite Flash figures for a few years. Even with the lessened articulation, he still looks pretty good.

#0946: Green Lantern

GREEN LANTERN

JUSTICE LEAGUE (2013)

GLTarget1

Batman: Brave & the Bold is a show that really doesn’t get enough credit. It’s one of DC’s better outputs in recent years, giving us four seasons of episodes built around showcasing some of the more sidelined members of the DCU. While the show was great, the corresponding toyline was more than a little disappointing. Rather than focusing on the obscure characters the show had been designed to highlight, Mattel offered a litany of senseless Batman variants, with only the occasional non-Bat character. What’s more, the figures were plagued with rather pointless accessories, and every one of them had large, distracting plugs on their arms, legs, and backs, ruining the streamlined nature of the show’s designs. What does all this have to do with today’s review? Well, in 2013, after running the B:BatB line into the ground, Mattel decided to reuse some of the molds to create a line of figures based on the New 52 incarnation of the Justice League. While they were sticking more with heavy hitters, the line offered a few new faces, and, more importantly, removed the silly, gimmicky plugs. Today, I’ll be looking at the Green Lantern figure.

THE FIGURE ITSELF

GLTarget2Green Lantern was released in the first assortment of the Target-exclusive Justice League line, which hit in 2013. He’s patterned after Hal Jordan’s New 52 appearance, which kinda seems a little counter to Brave and the Bold’s more classical influences. Granted, the New 52 GL design was a less glaring departure than some of the others, so he doesn’t look super out of place. The figure stands 5 inches tall and has 8 points of articulation. That’s not a lot of movement. I mean, I get that the designs can be a little hard to articulate, but they didn’t even give him (or anyone else in the line) knee movement. That’s rather annoying. Structurally, he uses a slightly re-tooled version of the basic Brave and the Bold body, which removes the previously mentioned plugs. Brave and the Bold had a rather unique styling to it, which somewhat eschewed the proportions of the characters. It was one of those styles that looks pretty good in animation, but isn’t very easy to translate into three dimensions. This base body tries its best to make it work, but doesn’t really succeed. The biggest issue is that it’s just a lot more rigid and stiff than any of the characters on the show, which makes it look super off, and calls extra attention to the weird proportions. GL’s one new piece is his head. You would think they might base it on Hal’s Brave and the Bold appearance, so as to continue the styling started with the body, but instead, Mattel’s opted to go with their own, more realistic take on Hal. The more realistic styling only further pronounces the issues with the body, which is really unfortunate. Hal’s paint manages to be pretty decent. The colors are nice and vibrant, and the lines are all very clean. I wish the ring had a bit more to make it stand out, but at least it’s there. Hal included a construct accessory, which is nice in theory. In practice, it’s less nice, since it’s re-used from one of the JLU Lanterns, and therefore is nowhere near large enough to fit over tis figure’s hands.

THE ME HALF OF THE EQUATION

Being the GL geek that I am, I was a bit letdown by the lack of a Hal Jordan in the Brave and the Bold line. When I found out about this line, I quite excitedly went out and tracked down this figure. The final product isn’t quite what I wanted. He’s far from terrible, but there’s definitely some room for improvement, and the overall effort feels rather lackluster.

#0128: Superman

SUPERMAN

JUSTICE LEAGUE (MATTEL)

A large portion of my appreciation for DC characters comes from the DC Animated Universe, created back in the early 90s by Bruce Timm and Paul Dini, when they first started Batman: The Animated series.  Batman led to Superman and Batman Beyond, and eventually, they moved on to what many see as the greatest entry on the list: Justice League and Justice League Unlimited.
Kenner offered the initial figures for BTAS, and when they were bought out by Hasbro, Hasbro continued.  By the time of JL, Hasbro was interested solely in Batman and Superman variants, so they had no plans to release the team from the show.  Eventually, the license was moved to Mattel, and Mattel quickly released a set of the seven main characters.  Today, I’ll be looking at the Superman from that line.

THE FIGURE ITSELF

Superman was modeled after his design on the show, specifically his look from the first season, although the differences are minor.  He stands just shy of 5 inches tall and features 5 points of articulation.  The sculpt is really sharp, and  very accurately represents the design on the show.  The design doesn’t really translate well to articulation, so Mattel seemed to go for the looks over movement, and I actually greatly prefer it this way.  I do wish that he had a little less of a hunched look on his neck, but overall, it doesn’t look too bad.  For the most part, Superman is molded in the appropriate colors where necessary, but what paint is there is fairly cleanly applied, and has no real issues.

THE ME HALF OF THE EQUATION

While I rushed to get the rest of the members of the team, I had plenty of Batmen and Supermen, so the two of them kinda had to wait.  Superman was actually not picked up individually, but actually was included with the Javelin 7, which I believe my brother and I bought a few years ago from a local toystore.  My brother kept the Javelin 7 to himself, and I got the Superman.  It’s probably one of the best animated Superman figures released, and fits nicely with the rest of the line.