#3019: Tigra

TIGRA

MARVEL LEGENDS (HASBRO)

“Fast feline reflexes and a prehensile tail make Marvel’s Tigra a dazzling force to be reckoned with.”

How are you guys holding up with all these Marvel Legends reviews?  Ready for something slightly different?  Well, umm, the Legends aren’t going anywhere…just yet.  But, Marvel’s Merry Mutants have had their time to shine, so why not take a quick focus shift over to the Avengers side of things.  Today, we go for a more obscure selection, Greer Nelson, aka Tigra.  Greer, in her original super persona “The Cat,” is notable for being part of Marvel’s initiative to create super hero comics that would be more aimed at female readers, and would also feature at least one female creator per book.  The Cat actually had two, with Marie Severin handling the art duties and Linda Fite taking on the writing duties.  The series was sadly short-lived (as were its compatriots Night Nurse and Shanna The She-Devil), lasting only four issues before being cancelled due to low sales.  Greer was revamped in 1974, now as Tigra, under Marvel’s monsters banner.  Following that, she made her way to the Avengers, notably serving as a founding member and long-term fixture of their West Coast spin-off.  She’s not been a stranger to action figures, though it’s been a little while.  She’s gotten one more, courtesy of Hasbro, which I’m taking a look at today.

THE FIGURE ITSELF

Tigra is the most recent release in the Retro Collection sub-branding of Hasbro’s Marvel Legends.  She follows up closely on the Hercules figure, and is likewise a Fan Channel-exclusive one-off release.  She slipped in right at the end of last year.  This marks Tigra’s second time as a Legends release, following up on Hasbro’s own release of her from the Nemesis Series, way back in 2009.  The line’s certainly come a long way since then.  The figure stands a little over 6 inches tall and she has 30 points of articulation.  The last Legends Tigra was saddled with the articulation typical of the line’s worst era, which was a real shame.  Thankfully, this time around she’s hitting during perhaps the line’s best era from an articulation standpoint.  She’s got a really impressive range of motion, as well as double joints on both the elbows and knees.  The elbows and knees are also using the pinless construction, allowing for a much better appearance aesthetically.  Tigra is sporting an all-new sculpt, and a pretty strong one at that.  There are two head sculpts included here, one more feral and dynamic, and one more calm and human.  Both are impressive, but I definitely find myself more drawn to the dynamic sculpt.  The body sculpt is clean, with a balanced set of proportions, matching up with her usual depictions in the comics.  There’s some great attention to detail, notably there are even little tufts of fur at a few key points, which really sells the whole cat lady thing pretty effectively.  The color work on this release is a vast improvement on the last one.  Tigra is supposed to be orange…you know, like a tiger.  The first one was really more of a pale orange/yellow, but this one is the more appropriate vibrant shade.  The paint work on her is clean, sharp, and well applied, making for quite an eye catching look.  Tigra is packed with two sets of hands, one in fists, and the other in a claw-bearing pose.

THE ME HALF OF THE EQUATION

A combination of an early love of West Coast Avengers, as well as being one of the few people on the planet to actually like United They Stand has given me quite an appreciation of Tigra as a character.  I went out and spent a rather high amount (at the time, anyway) for the last one, and I was always disappointed by how lackluster it wound up being.  This one is a much, much better release, and I’m really glad to have gotten a figure that seems to really give the character her due after all this time.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3018: Colossus

COLOSSUS

MARVEL LEGENDS (HASBRO)

In the apocalyptic world of Age of…Apocalypse…clever there, the usually gentle giant Piotr Rasputin is re-imagined into a tough as nails drill sergeant, who spends his portion of the cross-over training child soldiers to take down Apocalypse’s regime.  Perhaps not the most noble effort, but I guess desperate times call for desperate measures.  Likewise, Colossus’ still building relationship with Kitty Pryde became a full-fledged marriage in this alternate universe, as the pair of them became instructors for the AoA versions of Generation X.  Like Kitty, Colossus has previously been without any toy coverage, but Hasbro’s addressed that in this assortment as well.

THE FIGURE ITSELF

Colossus is the Build-A-Figure for the eponymous series of Marvel Legends, serving as the line’s second AoA-themed BaF.  Prior Colossus figures in the line have been just shy of the scale for a BaF treatment, but the AoA version of the character was notably larger than the standard universe version, making the larger figure justified here.  The figure stands a little over 8 inches tall and he has 31 points of articulation.  Despite his larger size, this figure is actually a little more posable than the smaller Colossus figures, even getting full double-joint movement at the elbows and knees.  It’s impressive the amount of movement they were able to get into him, even with all the armor and everything.  AoA Colossus is an all-new sculpt, and he’s quite frankly the most impressive sculpt in this whole assortment.  There’s just a ton of detail work, especially with the banded metal texturing of his skin.  There’s also a real intensity to the expression on the face, which seems perfect for this version of the character.  The only part of the construction I’m not super crazy about is the way the shoulder strap works, since it’s not really secured in any way, so it rattles around a lot.  The suspenders help keep it from being totally loose, but a peg of some sort to hold it to the shoulder would go a long way.  His color work is largely handled with molded colors for the plastic, which works well for him.  The paint work that’s there is cleanly applied, and brings out some of the necessary details in the sculpt.  Colossus is a Build-A-Figure, so he’s really an accessory himself, but he nevertheless gets two sets of hands, one in fists, and the other in open gesture.  This matches with the set-up the the 80th Colossus figure got, which is nice to see continue.

THE ME HALF OF THE EQUATION

The Toy Biz Legends Colossus kind of started the character’s Legends run off with a pretty high bar to clear.  Thus far, Hasbro’s done everything in there power to make sure their own Colossus releases clear that bar.  I’ve been a fan of all of them so far, but this is Hasbro’s best version of the character so far.  As much as I appreciate the 80th release for what he is, I’d honestly love to see a mainstream version of the character with this level of quality.  Until then, this figure is really awesome, and not only my favorite of this particular assortment, but honestly my favorite of the AoA Legends as a whole.

While I was able to enjoy the first AoA assortment when it hit, it was, admittedly, focused a lot on the portions of the crossover I’m less invested in.  I was really hoping for a second assortment that was more focused on my own personal interests from the story, and this assortment really delivered at that.  Colossus is the real star piece here, no doubt about that.  Rogue was definitely a surprise hit for me, and is probably next in the ranking, though Sabretooth certainly gives her a run for the spot.  Magneto, Cyclops, and Shadowcat are all figures that don’t *quite* stick the landing, but are still really solid figures of character designs I really wanted to see.  Iceman and Legion are both characters that weren’t as high on my list personally, but the figures turned out really well.  In general, this is just a really strong assortment, and to me, it really makes the whole set with the first assortment a more cohesive thing in general.

#3016: Iceman

ICEMAN

MARVEL LEGENDS (HASBRO)

“Iceman joins with the X-Men to stop Apocalypse and prevent the catastrophic culling of humankind in a harsh dystopian future.”

A jovial and somewhat silly character in the mainstream universe, the “Age of Apocalypse” universe made Iceman into a far more serious character, with a much more effective mastery over his powers.  Elements of this were first shown before AoA, when Bobby’s body was taken over by Emma Frost for a period of time, and were built on post-AoA when the mainstream Bobby decided to try to train more seriously with his abilities, but they got a very definite focus in AoA.  The AoA Iceman is not without toy treatment, but rarely in such an explicit fashion, at least until now.

THE FIGURE ITSELF

Iceman is figure 5 in the Colossus Series of Marvel Legends.  This marks the AoA version’s first time as a Legend, as well as the first time a figure has been actually labeled as an AoA Iceman, rather than just being inspired by him.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  Iceman is a mix of old and new parts, at his core being built around the Bucky Cap base body.  The lower arms and legs are shared with the Juggernaut Series version of Iceman (who was actually built on the Pizza Spidey body, not Bucky Cap), and he gets a new torso, shoulders, and head.  While others in the set have been far more dialed-in on their specifically ’90s crossover designs, Iceman is notably based more on his more recent appearances, from the handful of revisits to the AoA universe.  It’s not a bad look, but it does mean he clashes ever so slightly with everything else we’ve gotten.  The biggest change is really the hair, which hung forward a little more on the earlier illustrations.  I personally would have preferred he stick a little more to the ’90s appearances, but this one translates well enough.  This release of Iceman is far bluer than the last couple of Legends releases, going for a rather dark shade that pretty closely matches the old “Muntant Armor” figure, which served as his ’90s AoA figure.  I can certainly dig that.  There’s some slight frost detailing airbrushed in a few places, which works out pretty well.  I do wish there were some of it on the face, again like the ’90s figure, but the overall application works nicely.  Iceman is packed with an alternate set of spikier hands, borrowed from Carnage, as well as the right arm to the Colossus figure.

THE ME HALF OF THE EQUATION

AoA Iceman’s not a major change-up from the standard in terms of design, but that actually gives his figure some extra appeal, since it means he’s got multiple purposes.  I’ve always liked the spikier Iceman look, so this one’s pretty cool.  I wouldn’t mind seeing a tweak on this mold that does the 616 version’s spiky look, but in the meantime, this one’s a pretty solid figure that does what he needs to, and adds a little more depth to the AoA display.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3015: Shadowcat

SHADOWCAT

MARVEL LEGENDS (HASBRO)

“After being captured by Sabretooth, Katherine Pryde becomes the youngest member of the X-Men and trains to become the team’s ghost assassin.”

While generally one of the team’s more peaceful and friendly members in the mainstream universe, Kitty Pryde of the “Age of Apocalypse” universe is a far harder-edged character, as today’s figure’s bio hints at above.  She was one of a number of characters to become more edgy and extreme in this altered universe, but perhaps the sharpest turn, at least of the character’s that still remained “good”-aligned.  She’s previously been one of the characters untouched by toy treatment, but that changed with the most recent assortment.

THE FIGURE ITSELF

Shadowcat is figure 4 in the Colossus Series of Marvel Legends.  She’s obviously the first AoA-version of the character, but also the fourth Legends release for Kitty, the third under the Hasbro banner.  The figure stands a little under 6 inches tall and she has 27 points of articulation.  At first glance, she appears to be an all-new sculpt, but her legs and feet are actually a rather clever re-use of Lady Deathstrike’s legs.  Apart from those pieces, she’s all-new, though.  Generally, it’s a pretty good sculpt.  The proportions on the body are well-balanced, and the details are sharp and clean.  The head has been a point of contention since the figure was shown off.  Much like last year’s Invisible Woman, the face has some definitely odd qualities to it, especially given how the expression works out.  Ultimately, much like Sue, this is a sculpt that looks a lot better in person than it did in the prototype shots.  It’s still a little wonky, but from proper angles, it’s actually not a bad sculpt at all.  The color work on Kitty is pretty strong.  The paint application is cleanly handled, and I really like how the metallic blue of her costume turned out.  Shadowcat is packed with two sets of hands, one set of fists and one of open gesture, as well as two pairs of gauntlets, one set with the claws extended, and the other without.  She also gets the torso and pelvis of the Colossus Build-A-Figure, which is by far the largest piece, offsetting that she’s the smallest of the individual figures.

THE ME HALF OF THE EQUATION

Kitty is a character that certainly ranks highly for my selection of favorite X-Men, and while the AoA interpretation isn’t really much like the character I like, I can still appreciate the distinctly divergent take on the character for the purposes of the story.  I also do kind of dig the changed up design, so I was certainly happy to see her crop up here.  The face is a little weird, but the figure is otherwise quite well-rendered, and it’s always cool to get a design we haven’t seen in toy form before.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3014: Sabretooth

SABRETOOTH

MARVEL LEGENDS (HASBRO)

“After betraying Apocalypse and making his escape, Sabretooth joins with the mutant rebels the X-Men to fight for good in a harsh dystopian future.”

While the mainstream counterpart to Magneto had flirted with being on the side of good before the “Age of Apocalypse” crossover, before his heroic turn in AoA, Victor Creed, aka Sabretooth, had been a pretty irredeemable villain, with no real signs of any other intentions.  So, it was a pretty major change, and one of the crossover’s best story angles, as the psuedo-paternal relationship between Sabretooth and Blink gave their portion of the story a real emotional core, removed from the purely “x-treme-ness” of the other storylines.  We got Blink before any of the other AoA stuff, as well as Sabretooth’s non-verbal partner Wild Child in the first AoA assortment, but without a proper Sabretooth to go along with them.  Fortunately, Hasbro’s coming in with the save on that one!

THE FIGURE ITSELF

Sabretooth is figure 3 in the Colossus Series of Marvel Legends.  It’s this design’s fourth time in figure form, and its second time getting the Legends treatment, though the last one was during Toy Biz’s run, and wrought with a lot of odd design choices.  This one sticks more cleanly to the actual design from the original crossover, which is a plus.  The figure stands just shy of 8 inches tall and he has 30 points of articulation.  While the last couple Sabretooths have been on the Hyperion body, this one moves him up to the Colossus body.  It makes a degree of sense, since he was depicted as a fair bit larger during the crossover, and it also makes it so he pairs off a bit better with Wild Child, it’s also somewhat amusing in light of Cyclops keeping his previous build, even in light of the crossover bulking him up.  Maybe Sabretooth is bigger because of when he was working with Apocalypse?  Sure, let’s go with that.  Honestly, anything that stops us from getting another Hyperion re-use is alright by me.  He gets a pretty solid assortment of new parts, including new arms, lower legs, and two different heads, as well as add-ons for the collar and belt.  The two heads give is the two different sides of Creed; one is angry and pupil-less, while the other is a much friendlier expression.  After getting a lot of prior Sabretooth figures without the option for a calmer expression, it’s really nice to get both versions here.  The other new parts jibe well with the prior core body parts, and feature a lot of cool little details.  Interestingly, despite the arms being seemingly new, they still have visible pins at the elbows.  I have to wonder if his is a sculpt that might have sat for a bit.  Sabretooth’s paint work is pretty decently handled.  The detailing on the facial and arm hair works a lot better than such details tend to, and everything else is actually pretty clean.  There’s a slight mis-match from the hips to the rest of the legs, but other than that, things work out pretty well.  Sabretooth is packed with two sets of hands, one in fists, and the other in gripping, as well as the head for Colossus.  Also, while it’s not packed with him, it’s worth noting that, surprising no one, the chain included with Wild Child is properly fitted to Sabretooth’s forearm, which is pretty cool.  In hindsidght, I wonder if that might be why he’s still got the pins at the elbows, since the mold would need to have been worked out earlier than the others in this assortment in that case.  Food for thought.

THE ME HALF OF THE EQUATION

The prior Legends AoA Sabretooth always disappointed me, so the prospect of a new one was certainly an exciting one.  While he wasn’t in the first line-up, the inclusion of Wild Child made it pretty clear that we’d be seeing him sooner than later, which is why it made a lot of sense that he was also the first of these figures we actually saw.  I gotta say, he turned out really nicely, even better than I was expecting.  He pairs of really nicely with Wild Child, but he’s also just a really strong figure in his own right.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3013: Cyclops

CYCLOPS

MARVEL LEGENDS (HASBRO)

“Cyclops helps prisoners escape from Apocalypse’s prison camps in an attempt to be a force for good in a harsh dystopian future.”

To quote Jimmy Woo: “It’s an oversimplification of events, but yes.”  While the Cyclops of the “Age of Apocalypse” universe ultimately joins the side of good and aids in helping the victims of Apocalypse, that’s not where he spends most of the story.  While AoA saw a lot of previously villainous characters on the side of good, it also saw Cyclops, a character previously very straight-laced and noble, pretty firmly in the villains camp, at least at the start.  Sure, his in-grained noble streak kept him from being truly villainous, but he’s also very far from a force for good.  But, here I am critiquing the bios again, when I could be reviewing a new Cyclops figure.  What am I even doing with my life?

THE FIGURE ITSELF

Cyclops is figure 2 in the Colossus Series of Marvel Legends.  Though far from the first Legends Cyclops, it’s still the first Legends release for AoA, and the third figure for the AoA design overall.  The figure stands 6 1/4 inches tall and he has 32 points of articulation.  Cyclops is built on the Bucky Cap base body, which has been the consistent choice of base for Cyclops since the Puck Series version.  The AoA version has at times been depicted as a little larger in build, but that can be chalked up to artistic license, and thus far all of the other AoA variants have maintained consistency with their main counterparts in terms of body choices.  I mean, that’s gonna sort of fall apart as we make it further into the assortment, but we’ll stand by it here.  Ultimately, I really don’t mind it.  He gets a new head, arms, and an overlay piece for his belt/shoulder strap.  The head’s not quite as extreme and 90s-tastic as some of the illustrations made him out to be, but the important elements of the design are all present, and his features are also internally consistent with the other Cyclops figures from the line.  His new arms bulk him up a little bit more compared to the standard Bucky Cap pieces, as well as transitioning him to the pinless construction on the elbows.  Some of his articulation is lost on said elbows, which can really only make it about 90 degrees.  It’s understandable given the nature of the design.  Cyclops’ paint is generally very basic.  Much of the color work is just molded plastic, and it’s honestly a pretty basic layout of colors for the costume anyway.  Kudos to Hasbro, though, they did actually do some weathering and wear on the gold armored parts, which looks pretty solid.  Cyclops includes no accessories of his own, which is kind of a shame.  A blast effect, or an alternate head, maybe with the hair swept back to better show off the missing eye and scarring, would have been pretty cool.  All he winds up getting is the left leg for Colossus, which definitely feels light compared to pretty much everyone else.

THE ME HALF OF THE EQUATION

While I do really like Cyclops, and I even kind of like some of the stuff they did with him within the AoA story, the actual AoA design for the character isn’t necessarily one of my favorites for him.  It’s kind of overkill on the worst of the ’90s tropes for character design, really.  That being said, if you’re gonna have an AoA set-up, it feels wrong to not have him.  He’s another figure I felt was really missing from the first go-round, and I’m glad he showed up here.  He’s light on extras, and perhaps a little skinny, but overall I do rather like him, and hey, it’s another Cyclops, right?

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3012: Rogue

ROGUE

MARVEL LEGENDS (HASBRO)

“Rogue moves her way up the ranks of Magneto’s X-Men, eventually leading a team of mutants to prevent the culling of humankind.”

In the early ’90s, Rogue really started to take off as one of the X-Men’s most popular members, placing her at the center of a few more of the team’s stories, including one in particular, which saw her and Magneto as unlikely allies stranded in the Savage Land.  There were some slight hints of a romantic angle, initially unexplored in the main universe, which would serve as the basis for the full-fledged marriage between the two within the alternate universe of “Age of Apocalypse.”  Given Magneto’s central position in the cross-over, this allowed Rogue to maintain her central place as well, making her rather pivotal to the overall course of the story.  So, it’s only fitting that she too would be part of the Legends tie-in for the story.

THE FIGURE ITSELF

Rogue is officially figure 1 in the Colossus Series of Marvel Legends, the second AoA-themed assortment.  It’s the third time this version’s gotten a toy…or possibly the fourth.  Toy Biz did two versions of the costume, but they were both kind of iffy on wether they were officially AoA versions, or just kind of similar designs.  The Minimate was explicit about it, though, so there’s at least that.  Her design was more changed than others, though Rogue had a history of frequently changing designs prior to this.  This one keeps a lot basic schemes from her Jim Lee design, at least in terms of color and general layout, mixed with a few more Magneto elements, much like the rest of the main X-team from the cross-over.  The figure stands a little over 6 inches tall and she has 27 points of articulation.  She uses the Phoenix base body as a starting point, with a new head, upper arms, legs, and add-ons for the collar, wrist cuffs, and the pouches on her leg.  All-in-all, it makes for a pretty good rendition of her design from the comics, certainly the best we’ve seen in toy form up to this point.  The head’s probably the best part of it; I think the hair turned out pretty well, and there’s a dynamic flow to it.  The shaping on the back of is a little weird, but it at least allows for rather unimpeded movement on the neck.   The arms, on the other hand, are rather restricted at the shoulders and elbows, due to the billowy nature of the sleeves.  There’s not a lot that can really be done about that, of course, without compromising the aesthetics.  The new legs give her the goody bulky snow boots, which turned out well, as well as removing the exposed pins on the knees.  Rogue’s color work is bright, bold, and rather eye-catching.  The application is generally pretty clean and consistent, but there are some fuzzy edges on some of the change overs, as well as a notable bit of slop on the left boot.  Otherwise, she looks pretty good.  Rogue includes two sets of hands in fists and open gesture, as well as the left arm and an alternate hand for the Colossus Build-A-Figure.  It does feel a little light, and it would have been nice to see either her cape or the robe thing she was seen wearing over the main suit, but at least she gets the extra hands, I suppose.

THE ME HALF OF THE EQUATION

While Rogue’s AoA look isn’t at the top of my list or anything, it’s still got some cool elements to it, and I certainly like the Magneto and Rogue angle.  So, I definitely wanted to see her turn up in the Legends line-up, especially if we were getting a Magneto as well.  She’s a pretty basic and straight forward figure, but one that turned out well.  This design has had trouble making the transition to toy form in the past, but this figure did it well, and she honestly surprised me with how well I like her in-hand.

Thanks to my sponsors at All Time Toys for setting me up with this figure for review.  If you’re looking for cool toys both old and new, please check out their website.

#3011: Magneto

MAGNETO

MARVEL LEGENDS (HASBRO)

“Magneto casts off his anti-human sentiments and carries on Xavier’s dream of peaceful coexistence, thereby founding the X-Men.”

2020 marked the 25th anniversary of the X-Men crossover “Age of Apocalypse” and 2021 marked the 25th anniversary of the tie-in toys for that crossover.  What’s the significance of 2022?  It’s the 25th anniversary of the toys being a year old, I guess.  That’s gotta count for something, right?  Well, I’m gonna make it count for something, because in my case, it counts for reviewing another round of AoA-themed Legends.  That’s pretty cool, all things considered.  Throughout the history of the X-Men, Magneto has flirted with the idea of not being such a bad guy, even aiding, or in some cases outright joining the team.  It rarely lasts, but AoA posited that, were Magneto to see his friend Xavier murdered at a young age, that might just be the thing to make him an objectively good character.  So, in the AoA universe, Magneto is an unquestionable force of good, founder and leader of the X-Men, and the most prominent force in the fight against the objectively evil Apocalypse.  As such, he’s a pretty perfect choice for headlining the second assortment of AoA Legends.

THE FIGURE ITSELF

Magneto is part of the Colossus Series of Marvel Legends.  He is the only figure in the set not to include a piece of the Build-A-Figure, and is likewise this assortment’s double pack, which is honestly pretty sensible.  This is the fourth time the AoA version of Magneto’s gotten a figure, following the original Toy Biz 5-inch figure, the Minimate, and the 3 3/4-inch Hasbro version.  The figure stands 6 1/2 inches tall and he has 32 points of articulation.  As with the last few Magnetos, he’s based on the Spider-UK body, which is a good fit for the character, so I’m pretty happy to see it continue to be in use for the character.  In terms of design, Magneto’s AoA look wasn’t a drastic change from his mainstream look, so there’s a lot of room for parts re-use.  That being said, the only part (aside from the base body), that’s shared with the standard Magneto is the belt.  He also shares his forearms and boots with the modern Magneto, which are generally pretty good matches for the updated designs from the AoA books.  He gets a few new parts as well, namely an all-new cape/shoulder pad piece, as well as two new heads.  The cape does seem a little tame for how the AoA Magneto’s cape was usually depicted, but it’s still a pretty nice piece, which at least keeps the figure well-balanced.  The new heads give him helmeted and un-helmeted looks.  The un-helmeted is certainly the stronger of the two.  The facial features are a bit more defined, and the hair turned out quite well.  The helmeted head’s not terrible, but the helmet seems a touch on the small side, and I do feel like there’s a missed opportunity in not doing the blacked-out face under the helmet, as he was frequently depicted in the books.  Magneto’s paint work is generally pretty decent.  It’s straight forward, and really rather minimal, but it does what it needs to for the most part.  There’s a little bit of misalignment on one of the eyebrows one un-helmeted head, but it generally looks pretty good.  The only odd part is the decision to leave off the purple trunks. Later illustrations of the character dropped them, but the actual cross-over itself always showed him having them.  Magneto is packed with two sets of hands, one in fists, the other in open gesture, as well as two electricity effects.  Not a ton of stuff, but it covers the basics.

THE ME HALF OF THE EQUATION

AoA Magneto is really one of my favorite parts of the whole AoA thing, something I brought up when I reviewed the Toy Biz figure, itself my favorite of the Toy Biz AoA figures.  I’ve definitely been hoping for an update in Legends form for quite some time.  I was bummed when he wasn’t included with the first assortment, but his absence felt like it really confirmed a second assortment, since how can you not do this guy?  I was happy to be right.  Ultimately, there are some elements of the figure that could stand to be a little stronger, but he’s generally still a pretty solid take on the character, and I’m glad we got the update.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website.

#3005: Wolverine, Callisto, Jason Wyngarde, Omega Red, & Cyber

WOLVERINE, CALLISTO, JASON WYNGARDE, OMEGA RED, & CYBER

MARVEL LEGENDS (HASBRO)

Wow, it’s been, like, weeks, plural even, since I reviewed any Marvel Legends.  That’s crazy.  I mean, technically, I haven’t reviewed any of them since last year.  Can you believe that?  I’m honestly still sort of wrapping my head around it after two months of un-filtered Legends reviews.  Well, there’s still more to be reviewed, so I’d best ease myself back in.  Today’s review fulfills the component of being both a Legends review *and* a post-Christmas review, so it’s the perfect choice!  The last couple of years running, Amazon has gotten a larger boxed Legends-exclusive nearer to the holiday season, and 2021 followed suit, with a five-pack of figures, all (sort of) Wolverine-themed.  And that’s the set I’m looking at today!

THE FIGURES THEMSELVES

Wolverine, Callisto, Jason Wyngarde, Omega Red, and Cyber make up the Amazon-exclusive Wolverine 5-pack of Marvel Legends.  Well, it started out as an Amazon-exclusive, anyway.  It didn’t stay that way for much time at all, though, and is already available through a number of other retailers, including my sponsors over at All Time Toys, if you’re feeling inclined to pick a set up.

WOLVERINE

It’s difficult to do a Wolverine-themed set and not include a Wolverine, so Hasbro opted to do that.  I suppose that’s a reasonable stance for them to take.  We’ve had no shortage of Wolverines in the line, especially recently, so a lot of the major looks have already been covered.  In an effort to be a little bit different, Hasbro’s gone with a look that appears to be at least a little bit inspired by the cover of X-Men #251, which features a beaten Wolverine in his brown costume, sans shirt, cowl, and gloves.  It’s an interesting twist on his usual design, and has a fairly distinctive visual to it, so it’s not a bad choice.  The figure stands just shy of 6 inches tall and he has 32 points of articulation.  He’s built on the same core body they’ve been using since the Juggernaut Series, which is especially fitting in this figure’s case, since it’s meant to be the same costume as that one and all.  He gets two new head sculpts, both of them unmasked.  As of yet, the unmasked Wolverine heads for modern-era Legends have all felt a little bit lacking, so there was definitely a big push to get some ones that worked a bit better to translate that crazy hair into three dimensions.  These two give us both crazy and slightly more neutral expressions, and are easily the best unmasked Wolverines that Hasbro has produced.  I myself really like the calmer expression, but they’re both quite impressive in how they capture that more ’80s style look for Logan.  Otherwise, Wolverine is using re-used parts, and doing pretty well with that.  The paint work on this guy is pretty strong, as making him shirtless gives him all that body hair to contend with.  Fun stuff, right?  It actually works pretty well, and doesn’t look as goofy as painted hair can, so kudos to Hasbro on that.  The heads get some pretty solid work, with the calmer expression actually getting some bruising and cuts.  It stops it from being a totally standard head, which is a slight bummer, but at the same time, it does look really cool.  Hopefully, they’ll just repack this head with a more standard paint app later down the line, for a best of both worlds sort of set-up.  In addition to the two varieties of head mentioned above, this figure is also packed with hands both with and without the claws.  No X-crucifix, but I can see why Hasbro might want to forego packing such a thing in.

CALLISTO

This set is, ostensibly, supposed to be Wolverine-themed, being Logan versus a bunch of his foes.  Two figures in, we’re already kind of loosing that.  Callisto was introduced alongside the rest of the Morlocks, a group of sewer-dwelling mutants, in X-Men #169, as an attempt to have a few more mutants who weren’t quite as physically pristine as a lot of the X-Men were.  While she and the other Morlocks have certainly been involved with Wolverine by virtue of being in the X-Men universe and all, it’s not like there’s any sort of particularly close ties there.  That being said, she’s been without any toy treatment up until this point, so an excuse to finally release her in some form isn’t unwarranted.  The figure stands just over 6 inches tall and she has 27 points of articulation.  For the most part, Callisto is really just an excuse to get another use out of the Mohawk Storm parts.  Everything but the head and hands are shared with that figure.  It’s really not a bad bit of re-use; the two designs are quite similar, and given Storm and Callisto’s history, I suppose it wouldn’t be the weirdest thing in the world for them to share a taste in fashion.  Callisto’s new head sculpt is perhaps a little more conventionally good looking than Callisto was classically portrayed, but it’s in line with her more modern incarnations, and it’s not a bad sculpt.  The detailing on the scarring and the eye patch is pretty decent, and I do like that they’ve gotten at least a little bit of her usual scowl going on there.  Her paint work is generally pretty straight forward.  There’s not a ton of work going into it, since there’s a lot of molded color work, but the work on the head is well-handled, and the application is overall clean and fairly consistent.  I’m not big on how the painted edge of her torn shirt looks, but it was unlikely that they were going to sculpt a new lower torso just for Callisto.  As it stands, it looks alright.  Callisto is packed with two sets of hands, one gripping, the other in fists, as well as two different knives.

JASON WYNGARDE

Remember this being a Wolverine-themed set?  Hasbro doesn’t seem to so much, because the third figure, much like the second, is kind of not fitting that mold.  Appearing during “The Dark Phoenix Saga,” Jason Wyngarde is key to Jean’s descent into madness and her eventual dark turn.  Late in the story, he is revealed to be former Brotherhood of Evil Mutants member Mastermind in disguise, leaving the Wyngarde identity largely discarded, though it does get dusted off from time to time.  Wyngarde has little to no actual interaction with Wolverine, since it’s Jean he’s attempting to seduce and Cyclops he’s in more direct conflict with.  Perhaps he’s here because he and Wolverine both sparred with Cyclops for Jean’s affections?  Or perhaps because they both share a love of unique facial hair?  I don’t know, and I won’t complain, because I really like the Wyngarde persona, so I’m down for whatever needs to be done to get it in figure form.  Well, within reason.  Like, you know, this.  This is actually about as far as I’d go, really.  So, it worked out, all things considered.  No real moral compromises or anything.  You know what?  I’m proud of us.  We knew where to draw the line.  Great.  Back in the land of actually reviewing this figure on this here toy review site, the figure stands about 6 1/4 inches tall and he has 32 points of articulation.  Wyngarde is largely using parts from the two male members of the Hellfire Club set released last year.  Since he’s of similar build and also wore the same basic attire as Shaw and Pierce, it’s a sensible and in fact an expected choice.  This is the first time I’ve gotten to mess with the body, but it’s a pretty decent piece of work, and matches up well with how the characters are depicted in the comics.  Wyngarde’s head sculpt does a good job of capturing Byrne’s design for the character, while also translating that into the more standard Legends styling.  He’s suitably smarmy, while also still looking suave enough to understand part of how Jean might be swayed by him.  Wyngarde’s color palette is an interesting choice, since he’s patterned not on this “Dark Phoenix” appearance, but rather on his more recent All New All Different X-Men appearance.  It’s a minor change, and it’s not a bad color scheme, it’s just odd that they went for something other than literally the one appearance everyone knows him from.  Wyngarde is packed with an alternate Mastermind head.  It’s an impressive piece, though one that’s a little out of place without a body to match.  I’m sure it should be easy enough to rig something up, though.

OMEGA RED

Okay, now we’re actually getting to something properly Wolverine-related.  How about that?  Omega Red has had the Legends treatment rather recently, and is mostly just here in this set because that particular release has gotten rather pricey on the aftermarket these days.  This figure, like that one, stands about 7 inches tall and he has 32 points of articulation.  Omega Red is using the same parts selection as his Sauron Series release.  That was quite a nice figure, and by extension so is his one.  The molds have held up pretty well, and they still suit the character quite nicely.  I really do like those butterfly joints a lot.  The color work marks a notable change-up.  The colors are even brighter than they were the last time, with more brilliant whites and reds, as well as a few changed out colors on certain parts of the costume.  Overall, I like the new color scheme more than the old, though I will admit that I miss the cool omega symbols on the backs of the hands.  Otherwise, he’s got more of a ’90s animation feel than the last release, and I really dig that.  Like the last release, this one gets the two sets of tendrils, and also adds in a second head sculpt, with a screaming expression, which gives him some more posing options.

CYBER

Certainly the most obscure of the figures included here, Cyber is also the one that’s really the most sensible, as he’s actually only got the ties to Wolverine, and not the rest of the X-Men, so he’d be kind of out of place in a main assortment.  The figure stands just shy of 8 inches tall and he has 30 points of articulation.  Cyber makes use of the Colossus body, which is honestly a kind of criminally under-used base body.  He makes use of a combination of parts from both Colossuses, as well as Death’s Head, in order to have the most basic selection of parts possible.  He also gets a new head, as well as forearms and hands in order to complete his look.  It’s a very basic look, but that’s true to the character, so I guess Hasbro got it right there.  He’s big and imposing, which is pretty cool.  Cyber’s paint work is actually surprisingly involved, given how basic the design is.  There’s some accenting going on for the blue sections, which helps them to look a lot better than they would if they were just flat blue plastic.  I can dig it.  There are no accessories included for Cyber, though I’m not entirely sure what exactly you could give him.

THE ME HALF OF THE EQUATION

I got this whole set as a Christmas gift from my parents this year.  It’s one of those sets that’s kind of a hard sell, if I’m honest.  It’s not that any of the figures are bad, but really that they don’t seem to make for much of a cohesive package.  I myself really just view this as a very expensive way to finally own a Jason Wyngarde figure.  A very nice Jason Wyngarde, mind you, and one I’m very happy to have.  The others are all nice figures on their own, but ones I might have just as well skipped if I’d been given the option.  They’ll all suit my collection well when divied up to go into various different sections, though, so I can’t really complain too much.

#3000: Captain America – Infinity War

CAPTAIN AMERICA

AVENGERS: INFINITY WAR (HOT TOYS)

In a turn of events that I suppose is all rather fitting, today, the last day of 2021, also marks my 3000th review here at the site.  Pretty crazy, huh?  I never really foresaw myself making it quite this far, and yet, here I am.  3000 is a very big number, and a bigger number than the the total quantity of figures I had in my collection when I started this thing.  Moreover, I’ve made it all the way to the end of 2021, a journey that I would very much be underselling with the description “turbulent.”  A lot’s happened, and it has not been easy.  But I’m here.  And I’ve got a thing to review.  And I suppose that’s the most important thing in the moment.  So, let’s jump back to 2018, back to the throws of Avengers: Infinity War, specifically Captain America and his rather disheveled look from his own rather turbulent year.  Fitting, I suppose.

THE FIGURE ITSELF

Captain America is part of the Infinity War tie-in component of Hot Toys’ Movie Masterpiece Series, where he’s figure MMS 481, which made him the sixth of the IW tie-in figures.  The figure arrived not too long after the film’s release, hitting in the fall of 2018.  There were two releases of him, a standard and a “Movie Promo Edition” which was a Sideshow-exclusive in the US.  The difference between the two comes down to a few accessories; the figure proper remains the same.  This Cap is based on his Nomad appearance from the film, which is of course the only look he actually has in Infinity War, so I guess that makes sense.  The figure stands about 12 1/2 inches tall and he has over 30 points of articulation.

While most Caps these days include multiple heads, this release only has the one.  It makes some degree of sense, since he doesn’t have the helmeted look in the film, so I suppose he only needs the one head.  It’s only the one facial expression, but that’s not uncommon for unmasked heads from Hot Toys.  This one does live up to Hot Toys’ usual penchant for very lifelike sculpts.  It sports a pretty spot-on likeness of Evans in the film, at least facially.  The hair is perhaps a little bit too orderly for proper film accuracy, but it’s not too far off, and it’s certainly closer than either Hasbro or Bandai’s attempts were.  It avoids the seam at the sides of the head that the Endgame release had, but trades it out for a rather noticeable join at the back of the head where the longer hair attaches.  It’s still not the worst thing, but at this price point, you do hope for a little better.  At the very least, the paint work topping it all off is really good, up to Hot Toys’ typical standards for face paint, with a very lifelike quality to the whole thing.

In Infinity War, Cap is, at least canonically, supposed to still be wearing the suit he had in Civil War, having had not time on the run between films to swap out.  In actuality, there are a few changes to the suit beyond just the expected wear and tear of being on the run, but they’re generally minor.  In terms of how the suit works on the figure, it’s pretty similar to the Endgame figure, being two main parts, with a lot of layers attached.  As with that figure, this one’s belt sets perhaps a little low, but it’s otherwise a well-tailored outfit that works well with the underlying body of the figure and captures the look of the outfit seen in the film quite nicely.

The underlying base body appears to be the same one used for Endgame Cap, which was a good fit for Evans’ build for the character, as well as doing a good job of balancing aesthetics and functionality.  As with that figure, the movement of the base body is somewhat impeded by the nature of the suit design, which does have some notable restrictions at the hips and shoulders.  Still, there’s plenty of movement to be had, and he can get some pretty solid range on most of the joints.

When it comes to accessories, Cap gets quite a few, including:

  • 8 hands
  • 2 Wakandan shields
  • Outrider corpse
  • Corvus Glaive’s Spear
  • Proxima Midnight’s staff
  • Display stand

The hands include a pair of fists, a pair of gripping, a pair of relaxed gesture, and a right pointing/left open gesture combo.  They give all the important needs for posing and working with the included accessories, and also do a good job of capturing the look of his gloves from the movie.  They’re a little tricky to swap out, but not impossibly so.  The two Wakandan shields are designed for specifically right and left sides, and are able to be fully collapsed or extended, which is certainly nice engineering.  The display stand is the same style as we saw on the Endgame figure.  I dig the hexagonal shape.  And that’s all of the standard release stuff.  The exclusive also adds a fallen Outrider corpse piece to sit atop the stand (along with a printed piece which looks like dirt ground), as well as both Corvus Glaive and Proxima Midnight’s weapons.

THE ME HALF OF THE EQUATION

I missed out on the standard release of this guy when he came into All Time.  I mean, not really missed out, I suppose, since he was in stock, and I just dragged my feet on him, because I wasn’t sure I wanted to jump back into Hot Toys.  Once the Endgame release truly broke me on that, I regretted passing on this guy, so he went on my list of figures I was definitely planning to snag should they get traded in.  As luck would have it, this guy wound up getting traded in within about a week of me getting the Endgame version, which was a solid thematic thing.  He’s the best version of this design available to be sure, and he’s honestly the version of Cap that most reflected my personal mind state as I navigated the last year. A little broken, a little lost, and his resolve a little shaken.  But he’s still him deep down.  A fitting send off to the year.

Thanks to my sponsors over at All Time Toys for setting me up with this figure to review.  If you’re looking for cool toys both old and new, please check out their website and their eBay storefront.