Tag Archives: NECA

#0843: Chopper Predator

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CHOPPER PREDATOR

PREDATORS (NECA)

Chopper1

Alien vs. Predator is NOT a good movie. It’s pretty terrible from start to finish. However, it’s failure as a film is more punctuated by the fact that there’s actually a lot decent ideas (or at least the beginnings of decent ideas/concepts) that are completely dropped in favor of making the film as generic and forgettable as possible. One of the most disappointing aspects of the film is it’s handling of the second titular character, the Predator, or more accurately to the film, the Predators. The movie presents us with three unique Predators. They look cool, and their super imposing, and you’re super excited to see what they can do. But, they spend the first half of the film cloaked, and when they finally engage the Aliens, two of the three are taken out in the space of 5 minutes (by the same Xeno, no less!), leaving us with only the least distinctive of the three Predators to carry the rest of the film. Fortunately, NECA’s currently in the process of making super cool toys of just about every Predator ever, so the AvP Preds have gotten new life via action figures. Today, I’ll be looking at my personal favorite of the trio, Chopper Predator.

THE FIGURE ITSELF

Chopper2Chopper Predator is part of the 14th Series of NECA’s Predators line, which is the first of a handful of series (in both the Predator and Aliens lines) based on AvP. The figure stands almost 9 inches tall and has 32 points of articulation. Chopper uses a new base body for the Predators, introduced in this series, and shared with his two series-mates. This new body is much larger than previous Predators, and also offers a much greater range of motion and posability. The body is nicely proportioned, and it has a ton of really great texturing and fine detail work. Seriously, every part of this sculpt is covered in texturing, which makes him look really cool. While a lot of the body is shared with the other two Predators, Chopper does get a unique head, forearms, and plasma caster. The head depicts Chopper’s bio mask very nicely; the texturing on it really makes it look like the real thing. The “hair” is a little bit unruly, but it’s made from Chopper3soft rubber, so it can be managed.  The forearms are the real star here, since the large blades are what he takes his name from. The gauntlets have some fantastically ornate work on them, while still being nice and sturdy, and the left one even has a flip-up display. The actual blades are well-handled, and surprisingly sharp; they’re included in both semi-stowed and fully extended lengths, which is a nice touch. One of Chopper’s more distinctive elements was the pair of skulls mounted on spikes on his back, which this figure replicates as best it can. They’re included as separate pieces; one is slotted into the base of the plasma caster, and the other is supposed to pop into the little clip on Chopper’s back. I say “supposed” because mine included the clip included on Celtic and Scar, rather than the smaller unique clip that Chopper was meant to have. Chopper4Fortunately, a carefully shaped and cut twisty tie was enough to keep it in place! The actual skulls are just as awesomely sculpted as the rest of the figure, and replicate the in-movie look very well. Chopper’s paint work is another pretty great area. There’s some nice variance in the sheens of the various parts of him, with the skin being shinier than the armor and cloth. He’s also got some fantastic accent work on the armor, which gives it a nice worn in look and adds a lot of depth to the figure. There are one or two spots of bleed over, but the overall work is good enough that they don’t jump out at you. In addition to the two Chopper5sets of blades, and the skulls on spikes, Chopper also includes a Combi Stick (in retracted form), a pretty brutal looking knife, and a shuriken looking thing (which he can’t hold, what with having two fists. It’s the thought that counts!). That’s incredibly impressive given that prior Predators were lucky to get more than one accessory!

THE ME HALF OF THE EQUATION

Despite not caring for the film, I’ve actually been anxiously awaiting this series’ release ever since they were announced. I was always bummed that Chopper was so under-utilized, and even more bummed when he was the only Predator left out of McFarlane’s tie-in line. I bought Chopper from All Time Toys, after catching their post on their FB page that this series was in stock. I’m so happy to have him, and he’s hands down my favorite Predator to date. NECA did an amazing job on this one!

NecaSnow1

 

#0796: The Joker

Posted by Ethan Wilson in Reviews and tagged with , , , ,

THE JOKER

THE DARK KNIGHT (NECA)

LedgerJoker1

Yesterday, we looked at a figure from 1979’s Superman: The Movie. Today, we jump to pretty much the exact opposite side of the “super hero” movie spectrum, with 2008’s The Dark Knight. It’s lauded by many fans as one of the greatest comic book films of all time. You guys ready for some blasphemy? I think The Dark Knight is just an alright movie. Like, it’s not bad, or anything, and there are some moments of it that I really quite like, but as a whole, I just found it to be rather middling. Guess gritty realism just isn’t high on my list of things I want from my super hero movies. However, the movie did give us Heath Ledger’s extraordinarily memorable turn in the role of the Joker. Ledger’s Joker has received his fair share of toys, including NECA’s pretty sweet 18 inch figure. He’s gotten one more figure from NECA, in their more usual 7-inch scale, which I’ll be looking at today.

THE FIGURE ITSELF

LedgerJoker2Joker is the last of the three figures offered in this year’s DVD-based partnership between NECA and Warner Brothers. He was available in Warner Brothers’ eBay store in a DVD bundle, as well as at select Toys R Us stores. The figure stands just over 7 inches tall and has 24 points of articulation. Like the other two figures in this set, Joker is a scaled down version of NECA’s 18-inch figure. The sculpt is really a great translation of Ledger’s appearance in the movie. His clothing is constructed through a number of add-on pieces atop an underlying body, which results in a really authentic layered look. Each level has a bunch of texturing and fine detailing work, which really sells the realism of the clothing. The chain of his pocket watch is an actual metal chain, which can be a slight pain while posing, but is a really nice touch. The head is made up of two parts, with the main head being one piece and the hair being separate. The face has a passable likeness to Ledger; it’s not 100% him, but it’s clear who he’s supposed to be. The hair is a rubber-like material, and it does a decent job of capturing Ledger’s hair. It’s a little bunchy and thick in a few areas, but that’s forgivable in this scale, and the overall look is good. Batman had some spectacular paint work, and Superman had passable paintwork, so how does Joker measure up? Well, I think he falls somewhere between the two. The overall look is really great, and the general application is pretty clean. The detail work on his shirt and tie is really great, and the washes and such used to highlight the sculpt are mostly pretty good. There’s a small degree of slop around the collars of the jackets, and the coverage of the darker wash on the legs is a little spotty, but that’s about it. The Joker includes a knife, a handgun, and a machine gun, which is a pretty decent assortment of extras.

THE ME HALF OF THE EQUATION

I missed my local TRU’s shipment of Jokers. Given my only moderate fandom of the movie, I wasn’t super bummed about this or anything, since I wasn’t 100% sold on getting the figure to begin with. Ledger’s Joker was a good performance, but appearance-wise, I don’t quite put him on the same level as Reeve and West in their roles. However, when I found Superman, there was also a fresh stock of Joker figures, and I liked the figure enough in person to pick him up. He’s definitely a solid figure, and I like how he turned out. Glad I found him!

LedgerJoker3

#0795: Superman

Posted by Ethan Wilson in Reviews and tagged with , , , ,

SUPERMAN

SUPERMAN: THE MOVIE (NECA)

ReeveSuperman1

I love 1979’s Superman: The Movie. No joke. To date, it remains one of my top movies, and it’s just about my favorite superhero movie ever. Sure, it’s a little dated, but it’s got great cinematography, some pretty decent effects, and a truly amazing score by John Williams. On top of that, it had Christopher Reeve in the title role, which may well be one of the most spot-on casting choices of all time. That guy was Superman. Literally the only downside to the movie is that, up until recently, there were no toys specifically based on the movie versions of the characters. Things changed when Hot Toys released their truly magnificent 1/6 scale version of Reeve’s Superman. However, if you wanted a more traditional, small scale version of the character, the only real option was the 3 ¾ inch Mattel figure, which was alright, but not the be-all-end-all. NECA also got in on the game with their 18-inch scale figure, but he was kind of on the large side. So, what was a fan to do? Do just a little more waiting. See, NECA worked just a little more of their licensing magic, and partnered with Warner Brothers in order to release their awesome 18-inch Superman sculpt in their more standard 7-inch scale.

THE FIGURE ITSELF

ReeveSuperman2Superman was one of the three figures, along with Adam West Batman and Heath Ledger Joker, released as part of a partnership between NECA and Warner Brothers for a DVD-based promotion.  The figure is a little over 7 inches tall and has 26 points of articulation. Superman is a pretty straight scale down of NECA’s larger Superman figure. I liked that one a lot, but I felt there were just a few small issues with the overall presentation. Well, it seems that the shrinking in scale has done the sculpt quite a few favors. Chief among them is the softening of the expression on Clark’s face. The 18-inch figure seemed just a bit too angry for Reeve’s Superman. This one’s still got an intense look, but it’s a fair bit less menacing, and therefore bears a much closer resemblance to Reeve in the role. That’s definitely his face, and even the hair’s pretty spot-on. The body also exhibits some truly awesome work; the musculature looks just right for Reeve, and the level of texturing on the uniform is just superb. Superman’s torso is handled via two separate pieces: there’s an underlying base torso, with an overlay piece for his shirt piece. This adds a nice touch of realism, but it also helps to facilitate the proper attachment of the cape. Like Batman, the cape ReeveSuperman4is cloth, but I actually think this one works a lot better. The fabric is a heftier material and hangs a lot better, and just all around looks better. There’s even a Superman symbol on the back, which looks great. The assembly of the torso is a little iffy on my figure, with it sticking up a little more on the right side than on the left. However, with the cape properly placed, it isn’t noticeable. The paintwork on Superman is decent overall, but mostly you just don’t want to look at it too closely. The face has some of the best work, with everything being pretty clean. On the costume, the colors are well chosen, but there are a few spots of slop, especially around the edges of the logo. There’s also a pretty noticeable spot of blue paint on his neck, which is slightly frustrating. Superman is a bit light on the accessories, only including a spare set of hands for flying. Be careful swapping them out, though, as the pegs are a little brittle.

THE ME HALF OF THE EQUATION

Superman was quite a chore to get. See, you either had to find him in a Toys R Us or by him in a bundle with a DVD from WB’s eBay store. I missed the window on getting him online, so that meant I had to keep checking all the nearby TRUs in my area. To make matters worse, Superman ended up shipping later than the other two figures, so there was no telling when he’d hit. I searched for three weeks with no luck and I was this close to just giving up entirely. It’s not NECA’s fault, of course, since WB handled all the distribution, but it was still frustrating. Then, I was out and about with my family, a little out of the way, and we came across another TRU, and I actually managed to find this guy (plus an extra for my mom, who loves Christopher Reeve. Because I’m an awesome son). I’m really happy I found him, because he is, no contest, my favorite Superman in my collection.

ReeveSuperman3

#0770: Batman

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BATMAN

BATMAN: CLASSIC TV SERIES (NECA)

Batman66a

So, can we just have it put down in writing that NECA are just the most successful bunch of miracle workers of all time? Because these dudes continue to do the seemingly impossible. Between Mattel and DC Collectibles, the DC license is pretty well tied up for most conventional scales. The best NECA could do was grab the ¼ scale license. That’s cool and their sculpts were always really well handled, but 18 inch figures can be a bit unwieldy for the average collector. NECA’s usual 7 inch scale works much better. Last year, through some crazy loopholery, they were able to get a Michael Keaton Batman released at the smaller scale, thanks to some help from Warner Brothers. This year, they’ve decided to top even themselves, offering three more DC figures, including today’s focus figure, Adam West as Batman.

THE FIGURE ITSELF

Batman66bBatman was released alongside Superman and Joker, but there isn’t really one overarching name for the line. He was produced by NECA and distributed as part of a DVD-based promotion by Warner Brothers. The figure stands just over 7 inches tall and has 28 points of articulation. He is, of course, based on Adam West’s performance as the character in the 1960s Batman show. The other 7-inch figures are all more or less just scaled down versions of the 18 inch figures, but Batman’s been tweaked ever so slightly. It’s really just been done to change the articulation scheme. The 18 inch West had a few extra joints, which may not have translated quite as well to the smaller scale. It’s not a huge loss, though, since he’s still on par with the average NECA release, so he’s plenty posable. As far as the actual sculpt goes,this guy’s just fantastic. The likeness on the head is definitely West, and the cowl piece over top is a near perfect replica of that from the show. The body sculpt captures West’s build really nicely (something I felt the Hot Toys version was unable to do), and the level of detail and texturing on the costume is great. The only real drawback to this figure is the cape, which is just a simple piece of shiny blue fabric. Still, it hangs decently enough and looks alright, so it hardly ruins the figure. It seems impossible to talk about this figure without at least mentioning the Mattel version. I’ve included a comparison shot, because the level of difference between these two Batman66dhas to be seen to be believed. Absolutely night and day. Topping off this fantastic sculpt is a pretty awesome paint job. It’s not perfect, mind you. There’s a little bit of slop here and there, and I had to choose the better of the two available paint jobs. However, the overall look of this guy is just spot on, and there are several bits that sport some really great detail work. The 18 inch version of this guy came pretty well packed with extras. This guy understandably notches that back a bit, but he still has a spare set of hands in gripping/relaxed poses, a batarang, and a bat-radio transmitter. That’s a pretty good selection.

THE ME HALF OF THE EQUATION

Somewhat unusually for someone my age, I love the 60s Batman show. I was really excited when Mattel announced their line of 6 inch figures, but was ultimately a bit let down by the final product. So, when word broke about NECA’s version hitting Toys R Us, I ran right out to get this guy, and lucked into one on my first stop. Little did I know he’d be such a hot commodity. It’s understandable, because this is easily the best figure of West as Batman available.

Batman66f

#0763: Jungle Disguise Dutch

Posted by Ethan Wilson in Reviews and tagged with , , ,

JUNGLE DISGUISE DUTCH

PREDATOR (NECA)

DutchJD1

I love Aliens. It’s my favorite movie. NECA Toys has been making some pretty awesome toys from that movie recently. But, before starting on their awesome Aliens line, NECA took their first stab at total awesome-ness with the other big alien franchise from the 80s, Predator. They actually started things off with the franchise’s third film, Predators, before eventually making their way to the first two films. Since the Predator films came before a time when things like actor’s likeness rights for merchandise were included standard in actor’s contracts, NECA had to stick with the titular Predators. They did manage to get Arnold Schwarzenegger’s likeness rights, and promptly put out a whole bundle of figures of his character Alan “Dutch” Schaefer, based on his various appearances in Predator. I’ll be taking a look at his smelly, gross, oh-god-I-hope-that’s-mud covered “Jungle Disguise” figure today.

THE FIGURE ITSELF

DutchJD2Jungle Disguise Dutch was released in the tenth series of Predators figures from NECA. Series 10 was the second series following the addition of Dutch to the line, and was one of two versions of the character from this particular assortment. The figure stands 7 ¼ inches tall and has 29 points of articulation. Dutch is based on his appearance during his final, one-on-one battle with the Jungle Hunter. At that point, he’s covered himself in mud in order to mask his body heat, to get the upper hand. It’s kind of a distinctive look for the guy, so it’s not a shock to see it turn up here. The figure uses the forearms, and lower half of Series 9’s Jungle Patrol Dutch. Those pieces were pretty good there, and the re-use makes sense, seeing as he is the same guy in the same basic gear. The head, upper arms, and upper and lower torso are new to this particular figure, and they are, simply put, fantastic. The torso and arms are very nicely textured, with all sorts of cracks and leaves and such. The strap hanging on the torso is a separate add-on piece, which fits well in place, and can be removed, if one were so inclined. The head is an area where NECA could have cheaped out and used the Patrol Dutch head, but they didn’t. The face has texturing of the mud, to match the torso and arms, and the hair is even properly plastered down at the sides. And, on top of that, the Schwarzenegger likeness is dead-on. The paintwork on Dutch is pretty awesome too. It’s got some great subtleties to it; there’s a whole level of detailing, below the brown of the mud. This is most evident on the pants, which have full camo detailing, with matches up with all of the other Dutch figures, below a thin layer of brown. And, he’s even got a bit of red on his lip, from where the Predator hit him. Seriously, the level of detail on this paint is super great.  Dutch is armed to the teeth, as is befitting of him from this sequence of the movie. He’s got his assortment of hand-made weapons, including a spear, a bow, three arrows, and a torch.

THE ME HALF OF THE EQUATION

When I started picking up NECA figures, the Predators line pulled me in pretty quickly. That being said, I totally planned on limiting myself to just two figures: Jungle Hunter and Dutch. I ended up picking up the Jungle Extraction Dutch first (and he’s a fantastic figure in his own right), so I figured that would keep me covered. Then I got City Hunter and the Hive Wars Predator, and…my resolve kind of broke. But, this guy was expensive by that point, so I didn’t get him. I ended up finding him for a reasonable price at this past Shoreleave, and my Super Awesome Girlfriend insisted on buying him for me. So, now I have him, and he’s really, really cool. Easily one of NECA’s best.

DutchJD3

#0741: Power Loader

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

POWER LOADER

ALIENS (NECA)

PowerLoader1

Okay, everybody, you should know the drill by now. Ethan’s got a new Aliens toy and he’s all excited. Were he not showing restraint, every sentence in this review would be all caps and end in 34 exclamation points. Because this sucker’s pretty darn fantastic.

Two years ago, when NECA’s Aliens line was only just two series into its run, before we had any large items and before the Sigourney Weaver likeness rights were secured, NECA teased fans at how great this line could be. They confirmed that the Alien Queen would be joining the line, but when Toy Fair rolled around, the Queen’s sculpt wasn’t ready to go, so they put something else in the case. The Power Loader, the exo-skeleton perfect for telling female dogs to get away from people. It was the first real indication that NECA might be working on securing Weaver’s likeness and succeeding where every Aliens line before had failed. I mean, why make the Loader without Ripley? Then the Queen and Ripley were shown and solicited and released, and this one just seemed to slip through the cracks. Fortunately, NECA had not forgotten, and was hard at work getting the Loader released. And now it’s here. Let’s do this!

THE FIGURE ITSELF

PowerLoader3Like the Alien Queen, the Power Loader has been released as a deluxe entry in NECA’s Aliens line, filling the gap between Series 6 and 7 of the main figure line. The Power Loader has made its way into several pieces of Aliens media over the years, but this one is definitely based on its debut appearance in the 1986 movie. After getting the downright enormous Queen figure, the Loader is actually a little more compact than I had expected. Once I placed it next to Ripley, I was certain that it was properly scaled, but it is definitely compact. It stands roughly 10 inches tall and has 28 points of articulation, as well as eight actual, working pistons. The range of motion on anything outside of the arms is mostly pretty limited, but that’s true to the film design as well, so one can hardly complain. The sculpt on this piece is nothing short of amazing. For starters, it’s a really great recreation of the machine from the movie. But, just looking at it from a purely aesthetic standpoint, every piece of it is carefully crafted and full of tons of detail; it looks like a working machine.  Adding to that, a variety of different materials have been used to craft it. The main base is hard plastic, but the hoses and tubes, as well as the padding and straps in the spot for the PowerLoader4operator are made from a soft rubber, and the tracks on which the pincers move are all made from metal, so you don’t have to worry about breaking them. If there’s one negative, it’s the netting material used on the top of the harness part. In the film it’s a metal grate sort of piece. It’s forgivable, though, since that sort of piece seams infeasible at a smaller scale, and I definitely prefer slightly inaccurate to broken. The paint on the Power Loader does a great job of accenting the already awesome sculpt. The various small details are all nice and sharp, and there’s plenty of weathering to help make it look more like an actual machine and less like a hunk of plastic. It’s truly outstanding work. The Power Loader is designed with NECA’s Series 6 Lt. Ellen Ripley in mind, so it fits to her pretty well. PowerLoader5Getting the harness to fasten is a bit of a pain, but it stays alright once you get her properly placed. Also, although the Loader includes a spare set of hands for her to hold the controls, getting her hands to hold said controls without popping off of the wrists is virtually impossible. I managed to get the left hand alright, but I just let the right sort of hover there. It makes for easier posing anyway. For those curious, the Loader is really only designed with this particular Ripley figure in mind, so other NECA figures won’t fit right. I’ve included a shot of their recent Adam West Batman operating it, and you can see he’s really squished in there.

THE ME HALF OF THE EQUATION

This was meant to be my main birthday present from my parents this year, but it ended up getting delayed a few times (which I was actually kind of expecting). It just arrived last week, and I can happily say that it was absolutely worth the wait. Ripley looks right at home piloting it, and the Alien Queen’s shelf presence increases ten-fold when facing off against it. If there’s one must-have item from NECA’s Aliens line, this is definitely it!

PowerLoader2

#0717: Ultimate T-800

Posted by Ethan Wilson in Reviews and tagged with , , ,

ULTIMATE T-800

TERMINATOR 2 (NECA)

T800Ult1

Duhduhduhduhduh! KSHH Duhduhduhduhduh! KSHH Duhduhduhduhduh!

Did you guys pick up on that being the percussion section from the Terminator theme? It’s harder to transcribe than you might think. So, a few years back, my first real introduction to NECA was courtesy of their immensely cool T2 line. While the sculpts on those figures are still top notch, there’s one thing that was just a teeny bit dated: articulation. The figures had a pretty good set-up above the waist, but the legs were essentially motionless, which held back otherwise great figures. Fortunately, NECA is well aware of this issue and is fixing it, courtesy of their new(ish) subline of “Ultimate” figures. They’re kicking things off with the main man of T2, the T-800, aka “Uncle Bob.”

THE FIGURE ITSELF

T800Ult2aThe Ultimate T-800 was a single release, who started hitting stores last month, which, coincidentally, was the same time as the Terminator Genisys figures. The figure stands a little over 7 inches tall and has 26 points of articulation. That’s a whole 8 points more than his original release brethren. By design, the large portion of this figure’s tooling is shared with the prior T-800 figures. This isn’t a bad thing by any stretch of the imagination, of course, since the detailing on those older figures was pretty darn good. The jacket is wonderfully textured, and even has the bullet holes from where the T-800 shielded John from the T-1000. The gloved hands are also very well textured, and hold all of the included weapons pretty well. And then there are the heads. Three different heads are included: clean with sunglasses, clean without sunglasses, and fully battle-damaged. All three heads feature a very good rendition of Arnold’s likeness, but the sunglass-ed head absolutely nails it, and is my favorite by far. It’s just got the look down. The damaged head is a nice enough sculpt, but it’s a little jarring to see the fully damaged head on a completely intact body. I kind of wonder if the partially damaged head might have been a better fit here. Enough about the old pieces, what about the new pieces? Well, essentially the entire lower half is new.  I think the boots may be reused, but that’s it. The joints on the legs are a little stiff at first, but once you get them moving, they make a pretty big difference. They also match up really well with the pre-existing parts, so you’d be hard pressed to find evidence that they weren’t sculpted at the same time if you weren’t already aware. If there’s one area that this figure could stand to improve, it’s paint. To be fair, T800Ult5with the exception of a single one-of-a-kind issue that is quite glaring, the paint on this figure is actually pretty decent. The paint on the clothing is great, and it does a nice job accenting the texture of the sculpt. The grey shirt isn’t technically accurate with the sunglass-ed head, but that’s a really minor thing. The sunglass-ed and damaged heads are a touch messy, but nothing exceedingly bad; just a few missed spots here and there. What throws the whole figure off is the normal head’s eyebrows, which are just badly misplaced, throwing the whole thing off. It’s totally limited to my figure, and to NECA’s credit, their CS is already working to get me a replacement (at which point I’ll re-shoot that one shot with the messed up head), but it definitely renders the head useless for the time being. Fortunately, there are those other two heads to let me still enjoy my figure as much as possible! In addition to the extra heads, the T-800 also includes a shotgun, a handgun, a grenade launcher, a bandolier, and (my favorite) his minigun from the Cyberdyne scene. All of these are done with incredible accuracy, and it’s a great assortment of parts in general, though I wouldn’t have minded getting a set of ungloved hands to go with the shotgun.

THE ME HALF OF THE EQUATION

I ordered this guy at the same time as the two Genisys figures, and I was just as eager to get him as I was the other two. I only ended up getting one figure from NECA’s old T2 line (the fully battle-damaged version), so I’m happy to finally have a T-800 that covers most of the movie’s looks. The paint on the regular head was a bit disappointing, but if I’m honest I was always planning to set him up with the (admittedly inaccurate) sunglasses and minigun combo. Just look at how cool he is at the top!

T800Ult4

#0708: T-1000 – Police Disguise

Posted by Ethan Wilson in Reviews and tagged with , , ,

T-1000 – POLICE DISGUISE

TERMINATOR GENISYS (NECA)

T1000Genisys1

One of the most distinctive parts of Terminator 2 is its main antagonist, the T-1000, played oh so menacingly by actor Robert Patrick (and some CGI). The T-1000 upped the threat presented by the original T-800 in spades. After T2, the movies really struggled to up the ante again, which was disappointing. Genisys not only successfully brought up the threat, but they also brought back the T-1000 for a second round. The new T-1000 was chosen as one of the characters to be represented in NECA’s line of figures based on the movie. I’ll be looking at that figure today.

THE FIGURE ITSELF

T1000Genisys2The T-1000 is the second figure in the first assortment of NECA’s Terminator Genisys figures. He’s based on Byung-hun Lee’s performance as the T-1000 in the movie. The figure is 7 inches in height and he has 22 points of articulation. As far as sculpt goes, he’s got more than a few parts in common with NECA’s previous Robert Patrick T-1000. Seeing as they wear more or less the same uniform and Lee’s build isn’t that different from Patrick’s, this is a pretty reasonable re-use. The re-used parts are generally pretty good, but they are just a tiny bit more stylized than NECA’s more recent stuff. It’s not horribly noticeable, but the arms are definitely longer than they would be realistically. Still, the line work is nice and sharp, and the overall look of the character is captured very nicely. The figure obviously gets a new head sculpt (well, technically two), but he also gets a new lower half, which has been updated to give him proper leg articulation. That’s much appreciated. The figure has two different heads and two T1000Genisys3fronts for his torso, with and without bullet wounds. I prefer the damaged pieces, as they quite succinctly illustrate the T-1000’s abilities, but both sets of parts are nicely handled. The head sculpts both do a decent job of capturing Byung-hun Lee’s likeness, though I think the one with the bullet hole looks a little more like him. The paint on the T-1000 is pretty solid work. Nothing extraordinary, but nothing particularly bad either. Hopefully, the color of the uniform on this one will match up with the upcoming Ultimate T-1000 figure, but only time will tell. In addition to the extra head and torso pieces, the T-1000 is packed with his standard issue sidearm, two alternate right hands (trigger finger and basic grip), an alternate nub piece for his left arm, and liquid metal javelin. Hook arms would have been nice, but I guess they had to draw the line somewhere.

THE ME HALF OF THE EQUATION

I ordered the T-1000, alongside the Guardian T-800, from NECA’s eBay store. The character’s relatively minor in the film, but I never got any of NECA’s previous T-1000s, so this one’s a good stand in, at least until the Ultimate version is released. But, you really can’t have too many T-1000s, can you? Plus, this guy makes for a pretty awesome pairing with the 1984 Guardian. He’s got a fair bit going for him!

T1000Genisys4

#0707: Guardian T-800

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GUARDIAN T-800

TERMINATOR GENISYS

GuardianT800c

Frequent readers of the site will recall that I was quite complimentary of Terminator Genisys. Ever since the movie’s release, I’ve been eagerly awaiting its tie-in toyline. The line is produced by NECA, who are one of my favorite toy companies of late. They’re starting off with a small assortment of three figures. Two of them are available, and the third will be out some time later this year. Today, I’ll be taking a look at the first version of Arnold Schwarzenegger’s Guardian T-800.

THE FIGURE ITSELF

GuardianT800bThe Guardian T-800, referred to in the film as “Pops,” was released in the first assortment of Terminator Genisys figures. He’s based on his appearance from the 1984 portion of the film. It’s ultimately not quite as important as the 2017 look (which will be the third figure in the line), but it is how we first see him, which is a defining moment, to be sure. Plus, it’s a pretty good move on NECA’s part to release this version first, as many people who might pass on this version were both available will be inclined to get this guy as a place holder. The figure stands a little over 7 inches tall and has 24 points of articulation. Pops gets an all-new sculpt, some of which will probably see re-use on the 2017 version. Overall, I really love the sculpt. The proportions are great, the articulation’s been worked in really well, and he has some superb detail work. His leather jacket is creased and worn, just like the real thing, and the rest of the clothing has great texturing and depth. If there’s one drawback to the sculpt, it’s the likeness on the head. It’s not terrible, or anything, just not as good as what we’ve seen from NECA’s previous Schwarzenegger sculpts. I think a lot of it’s the hair, which just seems a little too bulbous around the sides. The actual face seems more on point, though it’s better from some angles than it is from others. From one angle, it’s Arnold, from another, he looks not unlike John Larroquette. The paint is pretty decent, but there are a few minor issues here and there. Most of the issues are on the head; the hairline in particular is a little sloppy. It’s not noticeable from a normal viewing distance, but it’s there when he’s up close. Pops is packed with a shotgun, which is what he’s seen wielding during his introductory scene. It’s nicely sculpted and it fits well in his hand.

THE ME HALF OF THE EQUATION

As I mentioned above, I was anxiously awaiting these figures. When NECA tweeted that the first two figures were in stock in their eBay store, I ordered them as quickly as I could. The 2017 version is still the one I’m waiting for, but this guy is pretty awesome. He’s got a few minor issues here and there, but the overall figure is cool enough that it doesn’t really bug me. This guy’s definitely a solid figure, and I’m very happy to have him!

#0686: Bishop – Queen Attack

Posted by Ethan Wilson in Reviews and tagged with , , ,

BISHOP – QUEEN ATTACK

ALIENS (NECA)

BishopHalf1

If you thought we were done with the awesome coverage of toys from the greatest movie ever made, you were sadly mistaken. There’s always more Aliens stuff to cover. Always.

Back in Series 3 of NECA’s Aliens line, they released the always reliable Artificial Person assigned to the Sulaco, Bishop. When I reviewed that figure, I made mention of the tooling more than likely Being a one-off for that figure, and jokingly remarked that the only re-use I could see it getting would be if they did a “half-Bishop.” Well, umm, NECA seems to have done just that. Let’s look at the figure now!

THE FIGURE ITSELF

BishopHalf2Bishop is another figure from Series 5 of NECA’s Aliens line. For those of you less familiar with Aliens than I, the figure replicates Bishop from Ripley’s definitive final battle with the Alien Queen. The Queen makes her presence known on the Sulaco by impaling Bishop with her tail and tearing him in two. Fortunately for Bishop, he’s an artificial person, so this proves non-fatal, allowing to pull off a pretty sweet heroic rescue later in the fight. It’s a pretty darn important part for him, and it accents Series 5’s final battle Ripley pretty well. The figure is about 3 1/2 inches tall and has 12 points of articulation, which is actually really impressive for a guy who has no lower half. Bishop actually uses less of the first Bishop’s sculpt then you might think. He just uses the arms, with the head, torso, shirt, and robo-guts all being newly sculpted. The new parts are very nicely handled. The shirt was a ton of texture, and you can even make out the tear in the front where the Queen’s tail ripped through it. It’s actually sculpted flat on the back, which looks a little odd when viewed head on, but it makes it so that he can be laid down correctly, which is definitely a good thing. The guts are appropriately goopy, and I appreciate that they are somewhat articulated. The head features a pretty BishopHalf5decent resemblance to Lance Henriksen, and it’s definitely got Bishop’s alarmed look from the scene down. I had a few issues with the paint on the first Bishop figure, mostly with the head. This figure tends to do a bit better in that area. The first Bishop’s eyebrows looked sharpied in place, which really hurt the likeness, but this figure has a more appropriate set of details. The eyes on this figure still possess the outline present on the first Bishop, but the actual eyes are handled much better. The outline is actually okay by me, because it helps bridge the two figures a little bit, and it’s really not that noticeable here. The rest of the paint is quite well handled. He’s appropriately messy looking, but in a controlled way, so he looks like what we saw on screen. Now, this figure is literally only half the man that the last Bishop was, but the cost is still the same. In order to make up for that, NECA’s given him one of the best accessories we’ve seen in this line: a face hugger and egg*. Both pieces are based on their Aliens designs, which are slightly different from those in the preceding film. The face hugger is sculpted in a sprawled out pose, and features a posable tail, which really goes a long way. Both the face hugger and the egg are tremendously well-sculpted and painted, and they look pretty much spot-on to the props from the movie.

THE ME HALF OF THE EQUATION

Bishop was another piece of the set of Series 5 figures I got from my parents for my birthday. He’s more than a little over-shadowed by the Ripley from this same series, due to really being an accent piece instead of his own figure. That said, he accents really well, and I couldn’t be more thrilled to actually have a half-Bishop figure. That wraps up my reviews of Series 5. It should be noted that series also contained single releases the two Xenomorphs from the Aliens: Genocide two-pack, which are essentially the same figures. If you’d like to read my review of that set, head here.

*As I was looking over my previous Bishop review, I noticed that, in addition to asking for a half-Bishop, I also suggested that the last Bishop should have included a face hugger accessory to make him a bit more worthwhile. Neither thing is really all that out there as an idea, but it is amusing that I brought both up before.

BishopHalf4