#0837: First Order Stormtrooper

FIRST ORDER STORMTROOPER

STAR WARS: THE BLACK SERIES

FOTrooperWM1

“Equipped with sleek armor and powerful weapons, the Stormtroopers enforce the will of the First Order.”

Everybody’s gotta have some faceless minions, right? You just aren’t a credible threat without a few thousand faceless minions! So, why don’t I take a look at one of the quintessential faceless minions, the Imperial First Order Stormtrooper?

THE FIGURE ITSELF

FOTrooperWM2The First Order Stormtrooper is part of the second series of the Walmart-exclusive Star Wars: The Black Series figures. The figure stands just over 3 ¾ inches tall and has 26 points of articulation. The articulation still features the awkward hips, and the torso joint is rather loose, but hey, guess what! We finally have a 3 ¾ inch FO Trooper who can hold his blaster properly! Isn’t that swell? Well, it’s more bittersweet, really. I’ll get to that. The sculpt is all-new to this particular Trooper; it’s decent, but not as strong as some of the other Troopers we’ve gotten. He’s a bit on the scrawny side, especially for the rather bulky FO Troopers. Still, the basic design is pretty solid, and there’s some nice detail work, especially on the underlying bodysuit. Now, here’s where a few minor issues with the sculpt arise. First of all, there’s the issue of the neck peg, which is once again much larger than the other figures (such as Finn), preventing easy head swaps. Then there are the hands, which have a fairly loose grip, which, coupled with the slightly restrictive sculpt of the elbow joints, means the figure has a really difficult time holding his gun the right way. Which is a super bummer. What’s even more of a bummer is the paint; it’s all over the place. There’s pretty much no part of the figure that isn’t subject to a missed section of paint, or some bleed over. While he looks okay from a distance, he’s really sloppy up close. The FO Trooper is packed with both a large and a small blaster, just like his larger counterpart. As noted, the figure has difficulty holding them, but one can be stowed on his thigh, which is cool.

THE ME HALF OF THE EQUATION

I got the Stormtrooper at the same time as Finn, courtesy of Super Awesome Girlfriend. I’m a fan of the new Trooper design, so I was kind of looking forward to this particular figure. It’s hard to say I’m not disappointed a little by the end product. The joints aren’t as strong as they could be, the hands are badly sculpted, and the paint is pretty sloppy. That said, he’s not terrible, just a bit of a letdown. Could he be better? Absolutely. Could he be worse? Very much so.

FOTrooperWM3

#0836: Finn (Jakku)

FINN (JAKKU)

STAR WARS: THE BLACK SERIES

FinnWM1

“A trained warrior desperate to escape his past, Finn is plunged into adventure as his conscience drives him down a heroic, but dangerous, path.”

One can hardly have Poe without Finn. Those two have to stick together! So, let’s look at a Finn figure!

THE FIGURE ITSELF

FinnWM2Finn is another figure in the third series of the Walmart-exclusive Star Wars: The Black Series figures. As with Poe, the main draw of this figure is the higher detailing and higher articulation count than the regular 3 ¾ inch figures. The figure is about 3 ¾ inches tall and has 26 points of articulation. The articulation is much the same as Poe’s, which is to say it’s mostly good, apart from the slightly outdated hip joints (though they’re less of an issue here, since being able to sit easily isn’t essential for Finn). As the name notes, this is the Jakku version of Finn (though his Jakku look ends up being his main look for the movie). At first glance it looks like this figure might share a few parts (namely the head and coat) with the regular release Finn, but a closer look shows that all of these figure’s pieces are new to this release. The detail work on the sculpt is absolutely superb, and there’s tons of fine detail work that really makes this figure stand out. The level of texturing on the clothing, especially the incredibly subtle detailing on the shirt, are really impressive. The two previous Finn’s had a pretty decent John Boyega likeness, but I think this one beats both. While Poe’s figure was hampered by sub-par paint, Finn ends up a bit more lucky on that front. The base paint is all very clean, and the work on the face is some of the cleanest I’ve seen from Hasbro in some time. The jacket and the lower portion of his pants also get some nice accent work, which adds a touch of realism. The pants could stand to be a touch more subtle, but the overall look is good. Finn is packed with a blaster, the same one all the other Finn figures have had. He doesn’t really use it much in the movie, but it’s a unique looking gun. What’s more, the level of painted detail on this version is astoundingly good. If only Hasbro could handle all of the accessory paint this well!

THE ME HALF OF THE EQUATION

After finding Poe, I was eager to pick up the rest of the Force Awakens characters from this line. Finn here was purchased for me by my Super Awesome Girlfriend, at a slightly out of the way Walmart. Poe had a few issues that held him back, but Finn isn’t in the same boat, and ends up being the best version of the character we’ve gotten so far. Definitely glad I got him!

FinnWM3

#0815: River Song, The Narrator, & Donna Noble

RIVER SONG, THE NARRATOR, & DONNA NOBLE

DOCTOR WHO

DWHOS4a

It’s day 14 of the Post-Christmas gift reviews. Fun fact, 14 is one more than the number of cannon incarnations of the Doctor. That’s not really related to anything, but there it is. Anyway, I’ll be doing one last Doctor Who-based review for this gift-giving season. This time, I’ll be looking at three figures (sort of…), none of whom are the Doctor. So, let’s dive right into looking at the three “R”s: River, Rassilon (aka the Narrator), and… Rdonna…

THE FIGURES THEMSELVES

These three were released as the Series Four boxed set. All three are re-releases of single-packed figures from earlier in Character Options’ Doctor Who line.

RIVER SONG

River Song is a favorite character for a lot of Who fans. She is not really a favorite of mine, however. I liked her fine enough in her first appearance “Silence in the Library,” but in all subsequent appearances, I just found her incredibly…grating. Fortunately, this figure is from her initial appearance, back when I didn’t dislike her. Yay. The figure stands a little over 5 inches tall and has 18 points of articulation. As she’s from “Silence in the Library,” River is depicted here in her compression suit she wore for the entirety of the episode. The sculpt does a pretty nice job of translating her look from the episode into figure form. The suit has a nice amount of detailing and texturing, which makes the whole thing look pretty realistic. The proportions do seem just a touch skewed, though, especially if there’s supposed to be a normally proportioned person inside the sculpted suit. However, it’s not too far off. The head sculpt does a decent enough job of capturing Alex Kingston’s likeness. It’s not perfect, but you can identify who it’s supposed to be. Her hair is a bit perplexing, though; her hair in the episode is rather messy, but it didn’t quite look like this. She’s got this two-piece construction going on, which has a somewhat obvious seam. It looks alright from the front, but just looks odd from any other angle. The paintwork on River is decent. Nothing stands out as particularly good or bad; it’s just kind of there. Her eyes do seem a bit on the lifeless side, even more so than usual on a Who figure. Other than that, the paint generally goes where it’s supposed to. River is packed with a gun, and what appears to be a small sonic screwdriver (it’s been forever since I saw the episode, so I can’t remember what she has). It’s a bit perplexing that she doesn’t include her helmet for her suit, but the two included pieces aren’t bad.

THE NARRATOR

DWHOS4bRassilon is a rather minor character in the grand scheme of the show. He’s only in the last two episodes of Tennant’s run, and only actually plays a role in the story in the second part. Sure, he’s kind of involved with Ten’s death and subsequent regeneration into Eleven, but only kind of. Heck, his figure doesn’t even get his actual name! He’s just called “The Narrator.” I think most people remember him for being played by Timothy Dalton, which is probably one of the best things about the character. The figure stands 6 ¼ inches tall and has 18 points of articulation. There are parts of Rassilon’s sculpt that are pretty good, but there are also parts that are not as good. The underlying body is pretty decently handled; the torso’s a little flat, but the texture work on his outfit is pretty nice. His coat/robe is probably the weakest part of the figure. The main piece of it is reasonably handled (though lacking in texturing), but the arms are just very awkwardly constructed, and pretty flimsy to boot. At the very least, his metal hand is pretty well done. The headsculpt is overall pretty good, but not quite perfect. Looking at this guy, you can definitely see some of Dalton’s likeness, but it feels almost a little squashed, making the figure look more like Dalton’s lesser known brother. The paintwork here is pretty much on par with the rest of the line, which is to say it’s good, but not great. The detailing on the front of the robe is pretty nice, but the skintone used here feels a bit too yellow to be right. The Narrator includes a staff, which was a fairly key accessory for the guy.

DONNA NOBLE

Donna is the figure in this set I’ve looked at once before, as part of the Companions set. This figure does appear to have slightly better paintwork than the last one, but other than that, this is the same figure as before.

THE ME HALF OF THE EQUATION

This trio was given to me by (who else?) my Super Awesome Girlfriend, who is deadset on getting me just as many Doctor Who figures as possible. I’m not the biggest fan of River as a character, but this figure is a pretty decent one. The Narrator could probably be better, but I like Timothy Dalton, and he’s really not that bad. All in all, not a bad little set.

 

#0813: Silent

SILENT

DOCTOR WHO

Silence1

It’s day 12 of the Post-Christmas gift reviews, and today I’ll be jumping back over to the world of Doctor Who. Amazingly, the 11 Doctors boxed set has failed to break my spirit in reviewing these guys! My collection of Doctor Who figures is made up mostly of incarnations of the Doctor, as well as a handful of companions for doctors 10 and 11. I’ve looked at a few of the Doctor’s otherworldly foes, but they are definitely in the minority. Today, I’ll be looking at one of the more recent additions to the Doctor’s rogues gallery, the Silent, who were added to the show during the second year of Matt Smith’s tenure. …Hold on. Sorry, was I saying something? I can’t quite remember….

THE FIGURE ITSELF

Silence2The Silent was released in Series 6 of Character Options’ Doctor Who line of figures. This figure is meant to represent one of the many generic Silence we see in the show. The Silent came in two different configurations: open and closed mouth. Mine is one of the closed mouth ones. The figure stands 6 ¾ inches tall and has 20 points of articulation. This figure towers over the rest of my Who figures, which surprised me at first, but a quick double check on shots from their appearances show that this height is fairly accurate. The Silent had a fairly basic look on the show, being another alien race that just went around in normal suits. The actual creatures look not unlike the main figure of Munch’s “The Scream,” which is certainly an appropriately eerie look. The figure’s sculpt does a pretty admirable job of translating the design to toy form. The proportions of the figure all look about right, and the main “alien bits” are all decent matches for what we saw on the screen. The sculpt would probably benefit from a bit more texturing overall, but he’s no less detailed than any of the other Who figures. The paintwork on this figure is Silence3decent all around. The best work is easily on the head and hands, which feature a nice bit of texturing and such, to make him look real. The suit is a bit less impressive, mostly because, for some reason, they opted to make the black rather glossy, as opposed to the slightly more matte finish it should have. Still, nothing about it is outright bad, so that’s good. The Silent includes two electricity add-ons, which attach nicely to his hands, as well as a packet of “flesh.” That last thing has nothing to do with the Silence, but is instead meant to be the stuff that made up the gangers from “The Rebel Flesh.” Each figure in this series came with a packet of this stuff. Yay?

THE ME HALF OF THE EQUATION

The Silent was given to me by my Super Awesome Girlfriend, who is dead set on getting me as many Doctor Who figures as she can. The Silence have never been my favorite Who foes, but this is a pretty nicely done figure. Plus, I got to mess with people by pretending to forget what figure this was every time I turned the packaging over.

#0810: 11 Doctors Boxed Set

THE DOCTOR, INCARNATIONS 1-11

DOCTOR WHO

11Doctors1

Welcome to day 9 of the Post-Christmas gift reviews! We’ve gotten quite a ways into these reviews without seeing any entries from a regular fixture in all gift related reviews, Doctor Who! Today, I’ll be fixing that in spades!

One of the key elements of Doctor Who’s lead character is his ability to regenerate into a new body when he is dealt a fatal blow. In the real world, this has allowed the character to be portrayed by thirteen different actors (counting the War Doctor) over the course of fifty years. It’s a marvelous way of keeping the character fresh for all that time, and it doesn’t rely on everyone looking the other way in a similar fashion to, say, James Bond. So far, I’ve looked at figures of four(ish) of the Doctor’s incarnations, but today, I’ll be knocking out the other nine! I’ll be totally honest with you all, I’ve been dreading this review just the slightest bit, because I’ve never actually reviewed this many figures at once. Let’s see how this goes!

THE FIGURES THEMSELVES

These eleven figures were released as part of a special boxed-set following Matt Smith stepping into the role in 2011. It somewhat amusingly proclaims it “Contains All Eleven Incarnations of the Doctor!” That’s no longer as inclusive as it boasts, but it was all of them at the time. It’s not like they’re time travelers or anything….

FIRST DOCTOR

11Doctors2William Hartnell was the one who started it all, bringing the Doctor his first life back in the 60s. He portrayed the character a fair bit different, in a much more reserved, less eccentric way than those who would follow. The figure stands 5 ¼ inches tall and has 18 points of articulation. The articulation is a bit more primitive than some of the more recent Doctors, but that’s acceptable given he’s an earlier release. Hartnell had more or less the same look for his run as the character, with varying add-ons. This figure presents him in his most basic look, without the extras, which was his primary appearance in the show, so it’s a good choice. The sculpt exhibits some pretty sharp work, in keeping with most of the other Doctor Who figures. There isn’t much texture work, but there is some very sharp small details. The head sculpt sports a pretty spot on likeness of Hartnell, giving an ever so slight smile, which feels right for the character. The First Doctor’s paintwork is quite sharp and well detailed. It’s somewhat monochromatic, but there’s a surprising number of levels to the greys, and it looks quite good. The paint on the face is decent, though he does have these odd red rings around his eyes. Maybe he didn’t sleep well last night? The figure includes the Doctor’s signature cane, which he holds quite nicely.

SECOND DOCTOR

11Doctors3Patrick Troughton may not be the guy who originated the role of the Doctor, but he’s still an innovator in the role, being the first to emerge from one of the Doctor’s regeneration sequences. Had his introduction not worked, the very integral concept of the Doctor being played by many actors would have been lost. The figure stands 5 inches tall and has the same articulation scheme as the First Doctor. Troughton’s Doctor was to inject a bit of eccentricity into the character. He was somewhat disheveled, and embraced his goofier side with a bow tie. This figure replicates that look quite nicely. Like Hartnell, the Second Doctor’s sculpt is sharply detailed, but a bit lighter on texturing. The jacket has a ton of detailing, showing the various creases and folds in the coat, which successfully makes it look like the jacket has been rolled up in a ball before being put on. The head sculpt is a fairly spot on likeness of Troughton, right down to his mop top of hair. The paintwork is nice and clean, and it adds a splash more color than the First Doctor. There’s some pretty awesome work on the polka dots on the tie and the plaid of the pants, which gives him a bit of pop. There’s a little bit of slop around his pocket square, as well as the edges of the hair, but the ver all work is pretty sharp. The Second Doctor was the first to use the sonic screwdriver, but it wasn’t yet his main thing, so this figure includes his recorder, which is a well enough handled, but he can’t quite hold it right.

THIRD DOCTOR

11Doctors4After the Second Doctor cleared the idea of replacing the show’s lead actor every so often, actor Jon Pertwee was the next in line, becoming the third actor to bear the role. Troughton’s Doctor was a disheveled genius, with a very goofy strain deeply rooted in him. He was ever so slightly awkward. Pertwee changed things. While he kept his flair for the dramatic, and played up the eccentricities, he was also a suave charmer, of almost Sean Connery levels. The figure stands 5 ½ inches tall (tallest in the set. Pertwee was a big guy) and has the same articulation as the prior two. One of the things about Pertwee’s Doctor, in terms of looks, was that he didn’t really have one specific look, like his predecessors. He had a style, but the specific costume pieces changed from story to story. This figure seems to do a decent job of summing up the “character” of Pertwee’s Doctor. He’s got the smoking jacket, the boots, the ruffled shirt, and the tie, as well as an add-on part for the coat/cape, which can be removed if you so choose. The quality of the sculpt is definitely up there, though like the others, he doesn’t do a whole lot as far as texturing on the clothing. The head does a nice job capturing Pertwee’s likeness, and there’s some really nice work on his crazy hairstyle. One thing I did notice about this figure is he has a little difficulty staying standing, I think due to the shaping of the legs. The Third Doctor’s paint is definitely more colorful than the previous two, but it’s not quite as complex. There’s a lot of just solid patches of color, which looks perfectly fine, but isn’t the most exciting thing. On the plus side, his gerneral design is a bit more visually interesting, so it offsets it well enough. The general application is pretty clean, so that’s good. The Third Doctor is the first to include his sonic screwdriver, which is well sculpted and fits nicely in his hand.

FOURTH DOCTOR

11Doctors5For a large chunk of people, Tom Baker’s Fourth Doctor is THE Doctor. He has the longest run of any actor in the role, and held the role during one of the show’s highest points for viewership (he was also the Doctor while one of my personal heroes, Douglas Adams, was the main story editor on the show, which certainly elevates him in my eyes). Unlike most of the others in this set, this was not the Fourth Doctor’s first figure in this line, due to his immense popularity. But, that doesn’t make this figure any less cool. The figure stands 5 ½ inches tall and has the same articulation as the others. He has the most detailed sculpt by far of all the figures in this set. There’s just a ton of fantastic work, especially texture work, that’s just very well carried out. A lot of it’s easy to miss or overlook, just due to the level of detail included. The coat and scarf are both separate pieces, with a nice flow about them. Under those parts, the figure is more inline with the other figures in the set, with a bit less texture, but still plenty of detail. There have been a few figures of the Fourth Doctor, so there have been a few stabs at his likeness, with various differing zany expressions. This one is slightly more reserved, but still somewhat goofy, and it’s a pretty decent likeness of Baker. The paintwork on the figure is rather involved, and there’s some varying quality throughout. The underlying paint is really great, especially the pattern on his vest. The rest of the paint is decent, but the scarf and coat and such show a bit of slop in a few areas. The Fourth Doctor includes his sonic screwdriver, which appears to be the same sculpt as that of the Third Doctor, but with slightly different paint.

FIFTH DOCTOR

11Doctors6Replacing a fan-favorite is no one’s ideal job, but that’s what Peter Davison came into when he became the fifth main actor to take the role of the Doctor. He had the task of replacing Baker’s defining turn in the role, which he approached by taking a more subdued stance on the character. Gone were the absurdly long scarf and the loud colors, replaced with someone who wouldn’t look out of place playing cricket at a prep school. The figure is about 5 ¼ inches tall, with the same 18 points as all of the prior figures. His sculpt falls somewhere between Baker and the others. His sculpt is definitely quite sharp, and there’s a lot of nice detail work. The hair and vest have some very well-handled texture work, but the rest of sculpt is fairly smooth, much like the others in the set. I do like that the vest is a separate piece. His likeness to Davison is definitely there, but not as strongly as some of the others. His paint is reminiscent of the First Doctor’s; it’s a bit monochromatic, but there’s lots of levels to those similar colors, which help to make him a rather impressively painted figure. He includes his sonic screwdriver, which is almost identical to the Fourth Doctor’s.

SIXTH DOCTOR

11Doctors7And now we get to the two figures for which I know the least. This here is the Sixth Doctor, portrayed by Colin Baker, brother of prior Doctor Tom Baker (okay, not really). He took the more refined look of the Fifth Doctor, discarded it, and went for more the “I stole this out of a clown’s closet” sort of look. That’s all I know. The figure stands 5 ¼ inches tall and has the same articulation scheme as the others. Six’s sculpt is reasonable, but not as good as some of the others in this set. A lot of that has to do with the basic build of the figure, which is somewhat off. His chest is a bit flat and rather squared off, his hips seem too far set apart, and he’s perpetually stuck leaning just a bit forward. The actual detail work does fair a bit better. His likeness is pretty spot-on to Colin Baker, and they even managed to capture that wacky head of hair. I’m not really sure what’s going on with his expression, but it works alright, I guess. The paint on this figure is certainly an undertaking. I think that CO managed to pull it off reasonably well, but he does still exhibit a fair amount of slop. The Sixth Doctor is the only figure in the set not to get an accessory, which seems a little unfair.

SEVENTH DOCTOR

11Doctors8And this here is the Seventh Doctor, portrayed by Sylvestor McCoy. He came after Colin Baker, and before Paul McGann. And now I’m out of things to say. He’s the shortest figure in the set, at just under 5 inches tall. His sculpt is reasonable enough, though I feel like the clothing is a little softer in definition than it was on the others. The coat sort of runs together with the scarf, and the tie, vest and shirt also run together a bit. He’s not a bad sculpt, just a sort of “meh” one. The head sort of looks like McCoy, but it’s a weaker likeness than the others. I think that may partly have to do with him lacking the hat that this incarnation of the character seemed to almost always have, which was certainly an interesting way to go. On the plus side the paint is really good here. The colors are nice and vibrant, and the various patterning on his clothing looks really cool. The Seventh Doctor is packed with an umbrella, which is quite a nice piece.

EIGHTH DOCTOR

11Doctors9After the show was cancelled during McCoy’s run, Amblin Entertainment did their best to bring back Doctor Who in the 90s, in a slightly more Americanized form. The venture was…less than successful. But, people generally liked Paul McGann’s Eighth Doctor, and the 50th Anniversary build up did a fair bit to give him a good storyline. This figure pre-dates those developments, but I won’t hold it against him. He’s about 5 ¼ inches tall and has the same standard articulation as everyone else. This figure’s sculpt also feels just a bit soft, though not as bad as Seven. There is some more definition between the parts of his clothing, but some of them do still run together a bit. His likeness isn’t too bad; you can definitely see McGann in there. However, I think the extra head included with the War Doctor might be a better example (even if it is from later in McGann’s career). The overall look of the sculpt sums up the Eighth Doctor pretty well, and this one feels like he’s better than the sum of his parts. The paint is a little bit of a step down. It’s much more drab than the others (which is accurate, to be fair), and there’s a couple of pretty obvious instances of bleed over. Eight includes his sonic screwdriver, which appears to be the same one included with Three, Four, and Five, just painted differently.

NINTH DOCTOR

11Doctors10Doctor Who finally made its way back to tv airwaves in 2005, with Christopher Eccleston as the ninth incarnation of the main character. The Ninth Doctor was a back to the basics, no nonsense approach, in both personality and design. He had perhaps the most reserved, average look of any Doctor incarnation, which actually kind of makes him stand out, despite his rather indistinctive look. The figure stands 5 ¼ inches tall. His articulation is similar to the others in the set, but he lacks the thigh swivels. This has to do with him reusing the torso and legs of the regeneration version of Ten. He does get new arms, so he keeps the swivels on the biceps. The overall sculpt is pretty solid, and is in keeping with the better entries in this set. The best work is definitely on the coat, which has some great fine detail work and texturing. His head has a pretty good likeness to Eccleston, and it’s at least good enough that he doesn’t just look like a random guy in a black jacket. The paintwork on Nine is pretty decent overall, but he does have a few missing spots on his hairline, which are a little obvious. The best work is once again on the jacket, which nicely replicates the look of a beaten up leather jacket. Nine includes his sonic screwdriver, which is totally different from the previous one, and does a good job capturing the look.

TENTH DOCTOR

11Doctors11After Eccleston’s rather short run as the character, David Tennant took over, and gave a turn as the Doctor that rivaled Tom Baker’s in terms of popularity. His Doctor was a bit more out there than Eccleston’s, but one of his signature characteristics was his ability to jump back and forth between comedic and serious in quick succession. He’s also one of the two Doctors in this set I’ve already reviewed. He’s roughly 5 ¼ inches tall, but he loses four points of of movement, two in his biceps and two in his thighs. This is mostly to do with being pretty much entirely a re-used figure. The torso, legs, and head (but not the glasses) are the same as the Doctor from the previously reviewed Doomsday set. Those pieces were good there and they’re still good here. As a positive, the addition of Ten’s longcoat does a good job of masking the slight bulkiness of the jacket. I also like the glasses, which aren’t as bulky and ill-fitting as most examples in smaller scales. One of the best parts of the Doomsday Doctor was his fantastic paint. This figure lives up to that, which I was definitely happy about. Ten includes his sonic screwdriver, which is the same piece as the one included with Nine.

ELEVENTH DOCTOR

11Doctors12Like Davison, Matt Smith had some big shoes to fill in taking over for fan-favorite David Tennant. However, unlike Davison, Matt Smith didn’t shy away from the more eccentric side of the character, and successfully earned a pretty size able fan base of his own, which was almost enough to rival Baker and Tennant. His figure stands 5 ¼ inches tall and has the same articulation as all the others barring Ten and Nine. The figure’s sculpt is definitely well done. He definitely captures Smith’s unique build, which sells who he is pretty well. There’s also some pretty nice texturing on his tweed jacket, and the basic details of his clothing are pretty sharp. The head sports a pretty good likeness of Smith; close enough that you can tell easily who it’s supposed to be. The bangs on his hair are a separate piece, and you can clearly see the seam where it joins the head, which is kind of annoying. Fortunately, that’s the only real issue with the sculpt. The paintwork on Eleven is pretty solid; the base work is all pretty clean, and the jacket has a nice wash which helps accent the sculpt really nicely. Eleven is packed with his unique sonic screwdriver, which is quite nicely sculpted.

THE ME HALF OF THE EQUATION

This set was given to me this Christmas by my Super Awesome Girlfriend and her parents, who seem to have also gotten into the swing of supporting this insane habit of mine. This set is a massive set. Really. But, it’s also a fantastic set of figures. Just all around a lot of fun.

Look at that, I just wrote a 3000 word review! I’m gonna go fall down now…

11Doctors13

Guest Review #0036: Altair Idn-La’Ahad

ALTAIR IBN-LA’AHAD

ASSASSIN’S CREED (MCFARLANE)

Altair1

The following is a guest review by my Super Awesome Girlfriend, Jessica Headlee.  For more from Jess, check out her book review blog, Of Books and Pen.

Altair was the assassin that started the Assassin’s Creed franchise and he is the first ancestor that Desmond Miles relives through an animus. Altair was the main character of only one platform game and one or two mobile games. In a few of the later games he did appear briefly within the story, and a few times the players could play as the original assassin for a time within the main story. Within the games, Altair is credited with being the master behind the Assassin’s Order that Ezio Auditore is introduced to in the second game.

THE FIGURE ITSELF

Altair2The Altair figure is part of the 3rd series of McFarlane Toys’ Assassin’s Creed line. He is about 5 inches tall with 24 points of articulation. The outfit this figure is wearing is a good replication of the one from the first game. The figure is well textured, giving the appearance of rough linen, which has been added to by the shadowing done by the paint. The boots, trousers, sleeves, and hood also include natural folds, which adds to realism of the figure. I also enjoy the detailing of the belt, pouches, and arm guards, including the silver coloring on the buckles and the sword’s sheath. The paint of the figure is well enough, the only mistakes that I found were around the red sash, where stray bits of red paint got on the white of the robe.

While playing the game and seeing Altair in later installments I don’t believe I ever saw his face. In the games the hood was always up and shadowed his face so that you couldn’t see more than the lower half. The only time you see most of his face is in the promotional videos and pictures, and possibly in the intro of the first game before you get to the main menu. With this figure you can clearly see the face, which I expected. However, the face bothers me a little. It’s a nicely sculpted face, don’t get me wrong, but it looks too much like Desmond Miles to me. I understand that Altair is Desmond’s ancestor, but I never pictured him to be the spitting image of a descendent several centuries in the future. From the few glimpses of most of his face I never pictured him looking exactly like Desmond. All that aside, the face of the figure is fine, including the faint scar on his lips and the stubble of his facial hair.

Along with the figure came a collection of accessories that Altair had within the game. The two hidden blades are simple in design, just like in the game, one in the resting position and the other in the fully extended position. The famous Altair sword, one that makes me geek out completely, has a simple look as well, with subtle detailing in the hilt. The sword also fits rather well within the figure’s nicely sculpted sheath. Finally, the figure comes with four small throwing knives shaped like they were in the game with little markings on the hilt. The knives fit well enough in their sheaths on the belt, however, occasionally the knives on the upper part of the belt will pop out of the holders when the figure’s arms move and bump into them. Unfortunately, the figure does not come with the long dagger that Altair could use in battle, which is a little bit of a shame. Overall, the figure is a well-made representation of one of my favorite assassins from the franchise.

THE ME HALF OF THE EQUATION

Altair was given to me by my super awesome boyfriend, Ethan, for Christmas this year. He’s always so attentive, he was there when I bought a different Assassin’s Creed figure and later asked me about all of my favorite characters. Let’s say a few months later I got a handful of new Assassin’s Creed figures, including Altair. The figure is fantastic and I’m happy to add him to my growing collection of action figures.

#0801: The Curator

THE CURATOR

DOCTOR WHO

Curator1

It’s the most wonderful time of the year! Okay, well, it was. Provided, of course you view Christmas as the “most wonderful time of the year.” Which not everyone does. I’m getting sidetracked. Sorry! Point is, Christmas has just passed, and that means another round of Christmas reviews. However, before I can get to the Christmas reviews, I have to first do the anniversary gift, which is sort of kind of Christmas Review #0.

One year ago, I looked at the War Doctor, from the Doctor Who 50th Anniversary Special (the surrounding promotion of which was my primary reason for getting into Doctor Who in the first place). Today, I’ll be going back to the 50th Anniversary another time, to look at another figure from that special. Yes, it’s the Curator, played by legendary Doctor Who actor Tom Baker, who may or may not be a future incarnation of the Doctor!

THE FIGURE ITSELF

Curator2The Curator is a deluxe release from the Doctor Who line from Character Options. Despite the line’s supposed move to 3 ¾ inch scale, there seems to be a continuous stream of new product at the larger scale. I’m not complaining, though. The figure stands about 5 ½ inches tall and has 22 points of articulation. He’s certainly taller than lots of previous figures from the line, but seeing as Tom Baker is 6’3”, that seems about right scale-wise. The Curator is based on Tom Baker’s cameo appearance from the very end of “The Day of the Doctor.” His sculpt appears to be all-new to him, though I’m not familiar enough with the Doctor Who molds to know for sure. The sculpt is, overall, not a bad piece, but he does feel like a slight step back in quality after the fantastic work seen on the “Time of the Doctor” version of Eleven. The best work is definitely the head, which has some fantastic detail work, and sports a wonderful likeness of an older Tom Baker. The rest of the sculpt is alright, if not amazing. He’s better than the vast majority of the line, for what it’s worth. His proportions are a little exaggerated, but they aren’t terrible. The thing that holds the sculpt back the most is the lack of any real texturing on the clothing. It’s in keeping with most of the line, so I’d give it a pass, except that was one area that the recent version of Eleven really excelled in. Still, the basic sculpt is pretty decent, and it’s a pretty good translation of the look of the character from the episode.  The paintwork on this figure is generally pretty good, but there are some issues that hold him back a bit. The biggest is the substantial amount of paint slop on his right ear, but there are also a few other places with some missed lines and slightly iffy application. That being said, it isn’t the worst I’ve seen from this line, and he looks pretty good overall, as a whole. The Curator includes a cane, which he carries for the entirety of his appearance. It’s a fairly basic piece, and he holds it pretty well. The other accessory is what makes this a deluxe item. It’s the “Galifrey Falls” painting, which has been done as a lenticular image, so that it can change to “Galifrey Falls No More” as it does in the episode.  It’s a neat addition, and the frame is very well sculpted, but the lenticular image makes it hard to really clearly see a fully formed painting. Still a cool piece, though.

THE ME HALF OF THE EQUATION

The Curator was an anniversary gift from Super Awesome Girlfriend. Isn’t it clever how she got me another anniversary special figure for our anniversary? And, since our anniversary is on the 24th, he’s also a pseudo-Christmas gift! So, the Curator’s not as cool as Eleven or the War Doctor, but he’s still a pretty neat little figure, and certainly a cool novelty item. Not a bad addition to the collection!

Curator3

#0769: Cable & Stryfe

CABLE VS STRYFE

X-MEN: STEEL MUTANTS

CableStryfe1

The X-Men were so popular in the 90s that they not only had two books of their own, but also a whopping three spin-off titles. Two of those, Excalibur and X-Factor, had been launched in the 80s, and the other, X-Force, was a rebranding of the New Mutants in order to make them more “extreme.” This included adding Cable, a dude who’s mutant power was apparently being a big dude with a gun, aka being the personification of 90s comics. Cable had a twin/clone, called Stryfe. Let’s look at some figures of those two today!

THE FIGURES THEMSELVES

This pair was released in the second series of Toy Biz’s X-Men: Steel Mutants line, because apparently the X-Men just weren’t 90s enough.

CABLE

CableStryfe2Oh man, here’s Cable. Why’s he called Cable? God only knows. Maybe he used to work for Comcast. That would certainly explain his surly nature. The figure stands 2 ½ inches tall and he has 4 points of articulation. Cable had quite a few figures in the 5 inch X-Force line, and this one uses Series 2’s Rapid Rocket Firing Cable as sort of a reference point. I don’t know if it’s based on a specific look, but it does present a slightly more subdued look for the character than usual. He doesn’t even have shoulder pads! His sculpt is generally pretty well handled. He’s got a good amount of detail, and his build does set him apart from the other figures in the line. Plus, I do dig that assymetry. His pose is pretty straight forward, with no real outlandish poising or anything, and he’s decently balanced, so there are no issues with getting him to stand. Cable’s paint is pretty much on par with the rest of the Steel Mutants. There’s a fair degree of bleed over around the edges, but he doesn’t look atrocious. The colors are pretty well chosen, and he looks pretty sharp.

STRYFE

CableStryfe3Yes, you read that name right. He’s named Stryfe. And it’s spelled with a “y.” Because 90s. Strule also stands roughly 2 ½ inches tall and has those same 4 points of articulation. Stryfe is presented here in full 90s glory. Check out that head gear. Seriously, that helmet looks like Liefeld deliberately set out to out-Wolverine Wolverine. I suppose they succeeded in that effort. Doesn’t make it look any less stupid, but more power to him. He appears to be inspired by the Stryfe figure in the 5-inch line, though he’s lost most of that figure’s interesting armor detailing, which has the unintended side effect of drawing more attention to just how goofy the main design of the character is. It doesn’t help matters that his sculpt is just markedly inferior to that of his pack mate. Cable is nicely sized, full of detail, and not in a super goofy pose. Stryfe is the opposite of those things. The size is particularly egregious, since he’s a clone of Cable, and should therefore be about the same size. That coupled with the long monkey arms, the strange lunging pose of the legs, and the ill-fitting cape makes for a really rough looking figure. The paint doesn’t really do him any favors either. He’s mostly a somewhat drab silver, which only further highlights the blandness of the sculpt. It is, at the very least, clean, which I suppose is a plus.

THE ME HALF OF THE EQUATION

This pair was purchased for me from Yesterday’s Fun, alongside the previously reviewed Cyclops and Mr. Sinister set, courtesy of my Super Awesome Girlfriend. Unlike the other set, I never had either of these guys growing up. In fact, this set represents the first, and to date only, Stryfe figure in my collection. So, there’s that. Cable is a pretty solid figure, but Stryfe is easily one of the weakest figures this line had to offer, resulting in an oddly balanced set.

#0764: First Order Flame Trooper

FIRST ORDER FLAME TROOPER

STAR WARS: THE FORCE AWAKENS

Flametrooper1

Basic Stormtroopers are the bread and butter of Star Wars collecting, but if all you have are the basics, things can get a little bit boring. No, you’ve got to have some specialization, right? The original trilogy threw special troopers for piloting, scouting, cold climate, and even desert…stuff into the mix. The new trilogy of films looks to be following suit with all of those, as well as adding an all new brand of trooper, the Flame Trooper, into the mix. I’ll be looking at one of the figures of that design today.

THE FIGURE ITSELF

Flametrooper2Specialized Stormtroopers of the First Order, Flametroopers carry incendiary weapons that can transform any battlefield into an infernal blaze.” So, yeah, specialized troopers. Says it right there. The Flame Trooper is part of the first round of the basic 3 ¾ inch The Force Awakens line of figures.  He’s part of the first trio of the “Lava” sub-set of figures. The figure stands roughly 3 ¾ inches tall and has 5 points of articulation. The Flame Trooper gets an all-new sculpt, based, of course, on the upcoming film’s design. The design is a variation of the First Order Stormtrooper design, which makes sense. His armor has been tweaked in a few areas, most notably the helmet, which has a much thinner visor, no doubt to keep the Trooper from being blinded by his own blaze. He’s also got what appears to be a rebreather built into the bottom portion of the helmet, which makes sense. The rest of the armor has also all been tweaked in its own way, mostly to afford the wearer more protection. As far as the actual sculpt goes, the figure does a Flametrooper4pretty good job of capturing the design, at least from what I’ve seen. The figure is just a bit more pre-posed than most of the others from this line; his legs are in a slight step positioning, presumably to help balance the weight of his flame thrower’s fuel tank. The Flame Trooper’s paint is pretty straight forward. He’s molded in white plastic, with paint for the black and silver details. The application is generally pretty clean, so that’s good. The Trooper includes his flame thrower which, while well-sculpted, can’t actually be properly held. He also incudes another build-a-thing piece, for those who care (which doesn’t include me).

THE ME HALF OF THE EQUATION

I ended up finding the Flame Trooper during the same trip that got me PZ and Goss. I had actually seen the figure once before, while visiting Super Awesome Girlfriend, but ended up passing him up at the time. Of course I wasn’t able to find him anywhere else, which certainly bummed me out. So, I was glad to come across him again. I really like this particular design, and the figure does a good job translating it.

#0727: Gambit & Bishop

GAMBIT & BISHOP

X-MEN: STEEL MUTANTS

BishopGambit1

The 90s were a fantastic time for toy collecting. Admittedly, I’m a little biased, having begun my collection during that decade, but even without the bias, it was a pretty good time to get into things. Star Wars toys came back, virtually every cartoon got at least some sort of tie-in, and super heroes found themselves with a consistent presence on toy shelves. Toy Biz had the Marvel license (it was still just a license then. They hadn’t yet become a sub-division of Marvel), and they were offering the Marvel characters in just about every scale imaginable, with lots of different mediums, presumably to see what stuck. One of their more short-lived experiments were smaller scale, metal figures. They offered figures from several Marvel properties, but the X-Men definitely got the main focus, with their line of Steel Mutants. Now, let’s take a look at Gambit and Bishop, two characters who are very, very 90s.

THE FIGURES THEMSELVES

Gambit and Bishop were part of the second series of X-Men: Steel Mutants. While they function fine as figures from the comics of the time, they were definitely meant to be based on the cartoon of the time.

GAMBIT

BishopGambit3Hey! It’s everyone’s favorite sleezy, disreputable mutant, Gambit! Or is it Channing Tatum? Well, turns out they’re kind of the same thing now. Yay. Gambit is presented here in his 80s/90s costume, which is definitely his most Gambit-y costume to date. Also the only one he’d had at the time this figure was made, so not a shock. It’s a totally hideous design, but I love it so much. The figure stands 2 ½ inches tall and has 4-ish points of articulation. I say “ish” because the waist and neck are both fairly limited by the design of the costume. It should be noted that Gambit, like all of the Steel Mutants, is not totally metal. His torso and legs are diecast, but the arms and head are plastic. Metal isn’t the easiest thing to get fine detailing into, especially at a smaller scale, so the torso and legs are a little more simplified in terms of sculpt, really only getting the most basic details. He doesn’t even have the rippling chest muscles that were a signature of all the other X-Men of the time. Guy really needs to get back to his bowflex! Gambit is posed in a mid-step sort of thing (prevalent to this line) which looks like it should make him impossible to stand, but he actually is incredibly well-balanced, so kudos to Toy Biz there. The plastic parts have a bit more detailing, though not so much as to make them look out of place with the metal parts. He’s sculpted holding a charged card, which is permanently affixed to his hand. The paint work on Gambit is thickly applied, in pretty basic colors. There’s a fair bit of bleed over, but that’s more forgivable at this scale. The colors are, at the very least, nice and vibrant, which is a definite plus.

BISHOP

BishopGambit2Bishop. Because the X-Men just weren’t content with only one overly muscled, big gun toting, anti-hero from the future. We totally needed more of those. Bishop is also presented here in his 90s costume. Once again, not a huge surprise. It’s a less hideous design than Gambit’s I suppose, but I have less of a nostalgic tie to it. Bishop is roughly the same height as Gambit and has the same articulation. He’s got a bit more movement in the waist, but the neck is even more limited, due to the hair. The metal to plastic ratio is the same here as well. The metal parts seem a little more detailed here, though, and he definitely makes up for those rippling muscles Gambit lacked. He’s in an even deeper stance than Gambit, with looks a little dopey, but he’s still well-balanced, so I can’t really complain. The details on the head and arms are definitely a lot more involved on this guy, which certainly fits how the character was always portrayed. Paint-wise, he does seem to get better application that Gambit, overall. There’s noticeably less bleed over this time around. The colors are still nice and vibrant, as well. While Gambit had no extras, Bishop actually does get an accessory: a big gun. He’d hardly be complete without it, so it’s a good inclusion. As an added plus, he can even hold in either hand. Yay for ambidextrousness!

THE ME HALF OF THE EQUATION

This set’s actually been on the review docket for a while, just waiting for a good spot. I got it back in May, while at Balticon. I had spotted it at the table of a dealer whom I bought quite a few other things from, but decided to pass at the moment. Super Awesome Girlfriend (who could just as easily be called Super Attentive Girlfriend) took note of this and while I was doing a performance on stage she ran up and bought the set for me to present me with after the show.

Growing up, I only actually had a few of the Toy Biz Metal figures, mostly from the non-X-Men lines. My dad, however, had a nearly complete set of the X-Men ones, which he let me play with. Gambit was always one of my favorites, so I’m happy to have one of my own! Bishop’s not a bad figure, but I’m just not much of a fan of the character. Anyway, these are definitely a weird little item, but they possess a lot of charm.