Tag Archives: TRU Exclusive

#1559: Transforming Thing & Herald Silver Surfer

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

TRANSFORMING THING & HERALD SILVER SURFER

MARVEL MINIMATES

After quite a bit of time of having to start every Fantastic Four-based review with a woeful intro about how the team has fallen out of focus, it’s kind of nice to be able to see the light at the end of the tunnel.  In case you aren’t up to date on the comics world, the Fantastic Four, or half of them anyway, are finally making their grand resurgence at Marvel, thanks to the recently launched revival of Marvel Two-In-One.  The book served as a showcase for FF member Ben Grimm in the ‘70s and ‘80s, pairing him off with other heroes from Marvel’s rather impressive stable of characters.  The re-launch once again focuses on Ben, but also brings in fellow FFer Johnny Storm, and is hopefully serving as a prelude to a full-fledged Fantastic Four relaunch.  Anyway, in honor of Ben’s return to comic-star-dom, how about looking at one of his figures?

THE FIGURES THEMSELVES

This pair was released in the 15th Toys R Us-exclusive series of Marvel Minimates.  The set was pulling double duty, with Ben meant to go with Series 48 of the main line (which was an all FF-themed assortment), and the Surfer augmenting the TRU-exclusive “Heralds of Galactus” set.

TRANSFORMING THING

“Pilot Ben Grimm first turned into the Thing after being bathed in cosmic radiation, and his skin was transformed into orange rock. He has since reverted to human form several times, but rarely for very long.”

This was the Thing’s twelfth (and, to date, last) time as a Minimate.  This one’s based on his John Byrne designed Negative Zone costume.  Ben actually had a few different costume variants under Byrne, and I think Minimates have covered them all.  This is the one that sticks the closest to the classic design, just being the usual shorts.  The figure stands about 2 1/2 inches tall and has either 14 or 12 points of articulation, depending on which way you have him configured.  Just how to handled Ben’s bulky build on the Minimate frame has been the source of much experimenting on DST’s part.  This one is a lot like the recent Hulks and such, being a standard ‘mate body, with a rather extensive selection of add-on pieces.  He’s got a head piece, chest cap, upper arm and leg covers, a pelvis cap, and unique hands and feet.  The head piece goes all the way back to the very first Thing ‘mate from Series 5, and most of the other pieces come from the first really bulked up Thing from Series 37.  The only new pieces here are the hands.  The last two Thing hands hadn’t really fit well with the new bulked up pieces, so these newer parts looked much better.  The bulked up look for Thing has always seemed maybe a touch too large for me, but I don’t think it looks horrible, and there’s no denying that there’s some really great detail work going on.  In terms of paint, Ben’s rather on the simple side…at first glance.  The detailing on the face is really good, of course, and I particularly like that they went with a calm expression.  One can only have so many screaming Ben Grimms.  The shade of orange used is one of my favorites, but it’s bright enough that he looks a little weird without any other sort of detailing on the rocks.  Some sort of black outline would have been cool.  As it stands, he still looks fine, but his face stands out quite a bit.  Under all of the add-on pieces, there’s actually a fully detailed second figure!  Yes, with the help of a spare head/hair, pelvis, hands, and feet, you can transform Ben back into his old human self.  The detailing on this underlying figure is pretty great, and it’s awesome that we got this option.

HERALD SILVER SURFER

The Surfer hasn’t been quite so lucky with ‘mates as Ben, with this one only being his third (and, again, his last to date).  I suppose it’s hard to do too much new with a guy whose design has remained essentially identical for 50 years.  From a sculpting standpoint, there’s not much to say about this guy.  He’s just the standard body, as he should be.  Painted details are really where it’s at, and Diamond has done a pretty awesome job of conveying the Surfer’s cosmic shininess.  The first Surfer was more abstract, and the second perhaps a bit too heavy on the details.  This one went for a Goldilocks approach to detailing and gave us a Surfer whose detail paint was just right.  I also appreciate the slightly more intense expression on this guy, since the last two went more stoic.  The Surfer was packed with his signature surfboard, as well as two energy effects for his hands, a portal effect to plug onto the back of his board, and a flight stand.  It all adds up to easily the most exciting looking of the three Silver Surfer ‘mates.

THE ME HALF OF THE EQUATION

I got Series 48 before these guys showed up, and that was one of my favorite assortments of Marvel Minimates pretty much ever.  So, I knew I was tracking this set down to complete my team.  At the time, I wasn’t particularly keen about getting another variant of the Surfer, but he was sort of along for the ride.  When I finally tracked this set down, I ended up loving it just as much as the Series 48 guys, and both figures included are hands down my definitive versions of the characters.

#1472: Cyclops & Dark Phoenix

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CYCLOPS & DARK PHOENIX

MARVEL LEGENDS (HASBRO)

“Though Scott Summers and Jean Grey shared a psychic link, Cyclops was no match for the Dark Phoenix. As Grey came to possess the power of the Phoenix Force, the Dark Phoenix rose, mastering telekinesis to overthrow her opposition and ascend to cosmic dominance.”

There’s much fan debate over what’s truly the “definitive era” of the X-Men.  For most people, it’s really just the era that introduced you to the characters.  For me, it’s the “All-New, All-Different” era (the first one, not the Bendis one).  Few people would debate the impact of that era’s climactic story, The Dark Phoenix Saga, a story that not only helped define the course of the X-Men going forward, but also the course of the comics industry as a whole, for better or for worse.  The story has been the source of a handful of toy adaptations, including the item I’m looking at today, a two-pack of the two central players, Scott Summers and Jean Grey, aka Cyclops and the Dark Phoenix.

THE FIGURES THEMSELVES

Cyclops and Dark Phoenix (or Marvel’s Dark Phoenix, as the box so possessively names her) are a Toys R Us-exclusive two pack from Hasbro’s Marvel Legends.  They’re one of four such packs this year, and were the first one to hit shelves, back in June.

CYCLOPS

Cyclops has had a lot of looks over the years, and while I’ve quite liked some of them (the Jim Lee look in particular is a favorite), this one’s really the top of the game.  It’s also the one that seems most neglected in the realm of action figures.  It was only released once in Toy Biz’s 5-inch X-Men line, as a rather hasty repaint, and then later in a two-pack as another hasty repaint.  There was a Toy Biz Marvel Legends release, but the less said about that, the better. This figure follows the formula established by the Warlock Series release, taking advantage of Hasbro’s new system to make the best version of this design out there.  The figure stands about 6 1/4 inches tall and he has 32 points of articulation.  Like every other Hasbro Cyclops in the last five years, he’s built on the Bucky Cap base, which makes for some nice consistency, and also very much fits this incarnation of the character.  In addition to the base body, the figure makes use of the standard buccaneer boots, the special left hand from both the Warlock and Puck Series releases, and an all-new head and belt.  The belt is pretty standard fair; it’s a little floaty, but it gets the job done.  The head is very similar to the one we saw on the Lee Cyclops, just sans the hair. I liked the sculpt the first time around, and I still very much like it here. It definitely captures the character.  The paint’s an area of this figure that had the opportunity to be rather bland if not handled well.  In the comics, the bulk of the costume is blue, but it was always heavily shaded.  That’s a look that’s hard to pull off on a three-dimensional figure, and many others have tried an failed to make it work convincingly (including Hasbro themselves).  This figure looks a lot better than its predecessors.  The base color is a darker blue, and they’ve gone in and airbrushed in some light blue highlights.  The end result can be a little inconsistent in some spots, but it’s overall quite nice looking, and gets the idea across pretty well.  Cyclops includes no accessories, which is a slight letdown.  I would have liked an alternate screaming head, so as to help recreate the cover of #136.  As is, he certainly feels light.

DARK PHOENIX

We actually saw this figure a little while before this pairing was officially announced.  Her head sculpt was shown in one of Hasbro’s slideshows, unpainted.  It wasn’t much of a shock, mind you, since to date no company’s done a Phoenix without an accompanying Dark Phoenix close behind.  That guaranteed second use of tooling is definitely appealing.  The figure is about 6 inches tall and she has 27 points of articulation.  Despite what might seem like an obvious chance to re-use some parts from the original Phoenix release, this figure is actually rather different from that one.  She starts with the same basic starting point, but with a different upper torso, thighs, and feet, and a brand new head sculpt. Most of the changes are minor, and virtually unnoticeable.  I certainly appreciate the new feet with flat heels, since it makes her a fair bit easier to keep her standing than the last one.  The new head is a really nice piece.  The hair in particular is really lively and dynamic, and just generally cool looking.  In terms of paint, this figure’s pretty decent all around.  She’s got a similar style of shading to the Cyclops on the red sections, and the yellows are pretty much the same as the first Phoenix.  The head takes the cake, though; the eyes are blanked out, but not straight white as they’re usually depicted.  Instead, they’re metallic, and accented by black on all sides.  The hair starts as a normal dark red, and then slowly becomes translucent, creating an almost fire-like quality.  It’s pretty cool.  Dark Phoenix makes up for Cyclops’ lack of extras, with two extra heads and a phoenix flame construct.  The first head is the same as the standard one, but with fully opaque hair and pupils in the eyes.  It’s not quite as cool, but it’s perfect if you’re looking to upgrade your basic Phoenix.  The second head is my least favorite of the options; she’s just got a calm expression, pupils, and straight hair.  It’s well done, but not particularly exciting.

THE ME HALF OF THE EQUATION

I’ve been looking forward to this set ever since the prototypes were first shown off.  Unfortunately, the two-packs appear to be the new scalper bait.  I found a small stash of this set back in June, but only had the money for one, which went to my Dad, since he had neither of the single releases and is the one who got me into this whole X-Men thing.  I didn’t see another one of these for a whole four months, but when I finally saw them again, I picked them up so fast.  I like this pair a lot.  I’m happy I found them.

#1426: Clone Commander Gree

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CLONE COMMANDER GREE

STAR WARS: THE BLACK SERIES

“Clone Commander Gree, designation 1004, led the Elite Corps of clone troopers during the Clone Wars.  He saw deployments on such heated battlefronts as Kashyyyk.  Though a faithful commander who carried out the Jedi’s orders, Gree was ultimately loyal to the Republic.”

I’ve spent two whole weeks looking at the smaller scale offerings for The Last Jedi, but I’ve not yet looked at any of Hasbro’s other big line, The Black Series.  There’s a simple reason for this:  I’ve yet to see most of the new Black Series stuff anywhere.  I did manage grab at least one figure, albeit not one of the characters from the new movie.  Instead, we jump back to the Prequels (I know, not my first choice either), and take a look at one of my favorite clones, Clone Commander Gree!

THE FIGURE ITSELF

Commander Gree is a Toys R Us exclusive offering for Star Wars: The Black Series.  A smaller supply of this figure initially showed up at SDCC this year, but the vast majority of figures showed up at TRU retail stores for Force Friday, allowing Gree to take the slot taken by the Snowtrooper Commander and Hovertank Driver in years past.  The figure stands about 6 inches tall and has 31 points of articulation.  Gree is seen here in his Phase II Clone Trooper from Revenge of the Sith.  It’s definitely the more distinct of his two designs, and thus not a surprise for this figure at all.  Gree is largely built from the same pieces as the Clone Sergeant I reviewed way back when. It was a good sculpt then, and it’s still a good sculpt now.  Gree obviously gets the Phase II helmet in place of the Phase I version, and it fits well on the body and looks far more accurate than a good number of other Phase II trooper figures.  Gree gets a unique torso and left thigh piece as well, patterned after the standard pieces, but adding some of Gree’s extra straps and such.  The torso even gets a port for a removable antennae, which is a nice touch, though the antennae has a tendency to fall out of place a lot.  Paint is the most important part of a good Commander Gree figure, and this figure definitely delivers on that front.  All of the colors match up very nicely with his on-screen color scheme, and the level of detailing, especially on the camouflaged areas of the armor, is just top notch.  They’ve even included a good deal of silver detailing, showcasing the wear and tear that Gree’s armor’s undergone.  That’s a detail that’s largely been left off of the smaller figures, so I’m very glad to see it show up here.  Gree is actually quite well accessorized for a Black Series release, getting both small and large blaster rifles, and a pair of quadnoculars to hold.  I wouldn’t have minded an unmasked head as well, but that’s still more than what’s been included with prior 6″ troopers.

THE ME HALF OF THE EQUATION

When I first started collecting The Black Series, my one rule was no Prequel figures.  I broke that rule for the Clone Sergeant, but I’ve stuck to it since.  However, even when I decided on that rule, I knew this guy would be an exception.  Gree’s always been my favorite of the Clone Commanders, and I have just about every other figure of him, so I certainly wasn’t passing on this one.  My TRU didn’t get any Black Series figures on Force Friday, but this guy showed up about a week later.  This is easily the best Gree figure ever released, and definitely one of my favorite Black Series figures.

#1403: Silk Spectre & Ozymandias

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SILK SPECTRE & OZYMANDIAS

WATCHMEN MINIMATES

“A second-generation crimefighter, LAURIE JUSPECZYK followed in her mother’s footsteps as SILK SPECTRE.  Although she was never close to with the super-intelligent hero OZYMANDIAS, their paths would cross again when someone begins a campaign to kill or discredit former vigilantes.”

You know it’s a bad pairing when even the bio on the back of the box describes the characters as “never close.”  The last two days of Watchmen Minimates perhaps haven’t been the strongest partnerships, but at least they all had one or two key scenes together.  Today?  We got the left overs.  Without further ado, Silk Spectre and Ozmandias!

THE FIGURES THEMSELVES

The prior two sets were made up of characters shared between the specialty four-pack and Toys R Us-exclusive assortment of Watchmen Minimates.  Silk Spectre and Ozymandias, on the other hand, are both exclusively available in two-pack form through TRU.  Why these two ended up as the exclusives is kind of hard to figure out; I personally would have swapped out Comedian and Laurie, but at the end of the day, it’s not a huge deal, I guess.

SILK SPECTRE

Laurie Jupiter (It was Juspeczyk in the comics, but the movie never explains Sally’s changed  surname or has Laurie correct Rorschach’s use of “Jupiter” when he meets her, so it sticks) is patterned loosely on Charlton Comics character Nightshade.  Really, though, the only similarities the two share are a partnership with Captain Atom/Dr. Manhattan.  Beyond that, they’re rather different.  For the purposes of the movie, Silk Spectre’s look was rather changed.  The basic spirit of the original look is still there, I guess, but it’s more generic catsuit now than it was originally.  Meh.  The figure is about 2 1/4 inches tall and she has the standard 14 points of articulation.  Her only add-on is her hair, which is borrowed from Marvel Minimates’ New Mutant Magik.  Given it’s a near perfect match for her hair in the movie, the re-use is certainly warranted.  The rest of the work is done by the paint.  It’s all pretty solid.  She’s probably got the best paint in the series, to be honest.  The colors are sharp and bold, and there’s very little slop.  She includes a clear display stand and…that’s it.  Seems a little light, but I don’t really know what you could give her.  Maybe a more interesting character?  Oh wait, they did!

OZYMANDIAS

Jokes at Laurie’s expense aside, I can’t say Ozymandias is really a favorite of mine either.  He does at least get to be the villain (spoilers?).  He was originally meant to be Peter Cannon…Thunderbolt (yes, the ellipsis is part of his name) who never amounted to much on his own.  Ozy’s design in the film looks rather different at first glance, but the only truly major change was making the main bodysuit dark grey instead of gold.  It’s still the most easily distinguished of the designs, though.  Like Laurie, he’s built on the standard ‘mate body.  He gets add-ons for his hair, cape, and belt.  The hair and cape are new pieces.  They’re a little soft on the details, but look decent enough overall.  In terms of paint, Ozy’s okay.  Nothing truly amazing.  The pale, non-metallic gold isn’t the best look, but the application’s fairly solid.  The standard head sports his mask (seen only in flashbacks), but there’s also an extra head without the mask.  That’s more than the DC Direct figure gave us!  He also includes the usual clear display stand.  Fun times.

THE ME HALF OF THE EQUATION

Well, those reviews kind of went out with a whimper, didn’t they?  Sorry guys, I’m not trying to be a downer on this set at all.  Neither ‘mate is bad or anything, but neither one is as strong as the other four.  I really feel like splitting up this pair would do a lot to help both of them.  With that said, once you’ve got the whole set together, it makes for a pretty sweet display.  I’ve been waiting a long time for Watchmen Minimates, and while maybe I would have preferred comics-based ones, these are definitely a great set of ‘mates to have.  Now, to hold out hope for a second series with some Minute Men!

#1331: Chief Tyrol & Mortar Pack Cylon

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

CHIEF TYROL & MORTAR PACK CYLON

BATTLESTAR GALACTICA MINIMATES

One of the appealing things about collecting Minimates is the ability to have a very wide range of properties all in one consistent style.  Their main Marvel line is pretty much always running in tandem with at least one line based on a popular Sci-Fi property.  Currently, that’s Aliens, but a few years ago, their sci-fi line of choice was Battlestar Galactica.  While it was never a huge seller, the line ran for 4 series before getting cancelled, and even then it was picked up for another two series by Toys R Us.  I’ll be looking at one of those sets today, so let’s dive right into the review!

THE FIGURES THEMSELVES

Tyrol and the Mortar Pack Cylon were released in the second Toys R Us-exclusive series of Battlestar Galactica Minimates.  This pair is notable for being one for the few sets in the two TRU series not to be re-purposed from the cancelled Series 5 and 6 or New Caprica boxed-set line-ups.

CHIEF TYROL

“One of the more troubled members of the Final Five, Chief Galen Tyrol resigned his commission after the loss of his wife and tried to find happiness with his son Nicky before learning the truth about his family’s past.”

Poor Chief.  Dude was a serious punching bag, especially later in the series.  He was pretty lucky when it came to Minimates, though; this was his third.  The figure is about 2 1/4 inches tall and has the usual 14 points of articulation.  He’s built on the standard base body, with add-ons for his hair and the bottom of his shirt.  The shirt is a standard piece and the hair came from Ghostbusters’ Ray Stanz.  The hair seems a touch bulky for Chief, especially a later in the series Chief, but it’s not terrible.  The rest of the details are rendered via paint.  Early BSG Minimates were a bit more on the simplistic side, but when TRU brought the line back, the level of detail was brought up to par with the more current stuff.  Chief’s got some pretty solid detail work, especially on his uniform.  The likeness on the face is a bit iffy.  Personally, I’ve always felt it looked more like Tamoah Pinikett (who played Helo on the show) than Chief’s actor Aaron Douglas.  I think Douglas just has one of those faces that doesn’t really lend itself to the ‘mate aesthetic, as his earlier ‘mates weren’t much better.  Chief included no accessories, but I’m not exactly sure what you’d give him.

MORTAR PACK CYLON

“Capable of downing enemy aircraft from stealthily concealed positions, Cylon ground forces often include at least one Mortar Pack Cylon Centurion. When damaged in battle, these destructive units can even repair themselves on the fly.”

The Cylon Centurions were the bread and butter of this line, since they were kind of the easiest way of keeping the packs at least somewhat interesting.  Chief may just be a normal dude in drab clothes, but that’s okay, because he’s packed with this sweet ass robot, right?  The figure uses the same starting base,  as every other Minimate, but with add-ons for the faceplate, chest piece, hands, pelvis, and feet.  They’re the same pieces that had been used countless times before for other Cylons, though the chest piece has been tweaked ever so slightly to allow for the mortar pack to be plugged into it.  The pieces all make for a decent enough approximation of the Cylons from the show.  I wish the upper torso were a little more mobile, and I’d really like to be able to actually use the neck articulation, but it’s decent enough.  The details are nice and sharp, especially on the torso and face, and he looks suitably different from the standard Minimate, without deviating so much as to lose the aesthetic altogether.  The paint is a bit more lax on this guy, but it’s still pretty solid. The gunmetal grey is applied cleanly, and all of the detail work is pretty sharp.  The only accessory is the titular mortar pack.  I don’t know if this was ever actually used on the show, but it’s a pretty cool piece nonetheless.

THE ME HALF OF THE EQUATION

There’s not much of an exciting story behind this set.  It hit Toys R Us, and I went and got it from my local store.  That’s really it.  I had a lot of the BSG Minimtates, but I can’t say I was ever super into any of them.  This set’s about average for the line.  Both ‘mates are well made, but there’s not a whole lot of excitement here.  If you like the show and Minimates, I guess you’d like these.

#1264: Fire Fighters

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FIRE FIGHTERS

M.A.X. MINIMATES — ELITE HEROES

“Mobile Action Xtreme, the world’s premier action response team!”

A large piece of Minimates success is how closely tied they are to all sorts of pop-culture.  There’s a definite novelty to having all of your favorite characters from numerous media sources in one cohesive style.  With that being said, one of the biggest holes in just about any toy collectors collection isn’t the main, licensed heroes; no, it’s actually the everyday joes who populate the background of all our favorite stories.  The cops, firefighters, soldiers, etc.  In 2010, DST offered Minimates fans the chance to add a few of those average joes to their collections, under the banner of M.A.X. Elite Heroes.  The line was sadly limited to just two series of two-packs, a box-set, and a handful of vehicles, but what was released was pretty darn awesome.  Today, I’ll be taking a look at one of the line’s sets of Fire Fighters!

THE FIGURES THEMSELVES

There were actually five varieties of Fire Fighters available in the M.A.X. Minimates — Elite Heroes line.  This represent the most basic of the group (the others were Smoke Jumpers and Chiefs).  This set was offered in both Series 1 and 2 of the line, with one slight tweak;  mine is the Series 2 version.  Included in this set are effectively two versions of the same figure, albeit with brown hair for one and black hair for the other.  Both figures stand about 2 1/4 inches tall and have the usual 14 points of articulation.  They use the basic ‘mate body as a starting point.  Both figures include standard Fire Fighter garb, which includes a helmet, a jacket, sleeves for the wrists, and a unique set of feet with bulky pant cuffs attached.    The pieces all sit well on the body, and look like the gear gear that the real guys use.  The details are nice and clean, and fit well with the slightly simplistic stylings of ‘mates.  The second guy includes an extra set of arms, hands, and feet, as well as a belt piece and hair, allowing for a dressed-down appearance.  There’s also a clear torso piece to allow for storage of his jacket and arms when he’s not using them. The paint on the two figures is virtually identical, apart from the previously mentioned hair colors.  This means both guys have the same face.  Most of the M.A.X guys were really generic facially, but these two were less so.  They’re still generic enough to work, but they look a bit like twins.  Fortunately, the nature of Minimates makes it pretty easy to swap the heads out if you want to.  The rest of the paint is all pretty solid; there’s some slight bleed over here and there, but nothing beyond reason.  The set was quite heavy on the accessories.  In addition to the already mentioned extra body pieces, there was a hair piece for each figure, a helmet with a mask attached, an oxygen tank, a polearm, a flashlight, the jaws of life, and a fire extinguisher, and two axes.  That’s a fun selection of extras, and allows you to build your Fire Fighters pretty much how ever you want to.  There’s a reason these sets all ended up being rather hard to find.

THE ME HALF OF THE EQUATION

I completely missed the first series of M.A.X.  Literally never saw a single one in stores.  They were pretty popular, and hit at a time when I wasn’t able to just swing by Toys R Us every few days to check.  I almost missed these guys too.  One of my local TRUs was going out of business and had a good chunk of products marked down pretty far.  I ended up grabbing pretty much all of the Minimates they had in stock, which included most of the second series of M.A.X. (I never did get those Police Officers, though).  This is probably my least favorite from the set, but that’s kind of a hollow qualifier, since they were all really awesome.  It’s a shame we didn’t get more of these guys, but I’m happy I got the ones I did.

#1246: Strong Zealot & Astral Form Doctor Strange

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

STRONG ZEALOT & ASTRAL FORM DOCTOR STANGE

MARVEL MINIMATES

Okay, one more day of the Doctor Strange Minimates.  Well, unless I track down the two specialty exclusive sets.  Which I probably will, because that’s the sort of person I am.  Anyway, today we get another version of the film’s title character, who this time around is facing off against one of Kaecilius’s Zealot followers.  Specifically the strong one.  It says so on the box!

THE FIGURES THEMSELVES

The Strong Zealot and Astral Form Doctor Strange were the Toys R Us-exclusive set for the Doctor Strange assortment of Marvel Minimates.  It’s actually a pretty solid pairing, since the Strange fights this particular Zealot while in Astral Form.

STRONG ZEALOT

Okay, so the box just calls him “Strong Zealot,” but this guy was actually named Lucian (not that it’s ever said in the movie), and he was played by stunt man Scott Adkins.  This is actually the second time Adkins has gotten a Minimate; he portrayed Weapon XI in X-Men Origins: Wolverine.  Hey, it’s not his fault!  Anyway, this particular Zealot was actually fairly important, so it’s cool that he got his own specific ‘mate.  The figure is built on the standard ‘mate body, so he’s about 2 1/4 inches tall and he has the usual 14 points of articulation.  He has two add-on pieces for his hair and skirt piece. The hair s re-used from BSG’s Anders.  It’s not a perfect match for Lucian’s hair, but it’s close enough that it doesn’t look too off.  The skirt looks to be a new piece, and it’s about on par with the rest of the pieces from this particular assortment.  Actually, the details might even be a little sharper on this particular piece, which is always a good thing.  The paint on the Zealot is generally pretty top-notch.  He’s got all of the various shades of purple down pretty well, and there’s plenty of detail work therein.  He’s got the funky eyes to match Kaecilius’ alternate head, and it looks just as cool here as it did there, with the added bonus of being on a slightly better ‘mate.  Lucian’s only extra is a clear display stand.  While something else might have been nice, I can’t really think of anything else you could give him.  Maybe a head without the eye stuff?

ASTRAL FORM DOCTOR STRANGE

Astral Form Strange figures are pretty standard, since they mean you can get an easy re-use out of the already existing Strange molds.  That being said, this is actually the first time the look has shown up in ‘mate form, so it’s noteworthy in that respect.  Anyway, this figure uses all the same pieces as the regular Doctor Strange from this same series.  They were good there, and they remain good here.  He keeps the cloak of levitation, despite its absence during his main Astral Projection scene, but I’m hardly going to complain about getting an extra piece here.  The main difference here is the coloring; this figure is molded in a translucent pale yellow, which works well enough.  He still retained his overall coloring in the movie, with just a slight tint, but that’s a bit harder to do in plastic, so this is the look that most figure versions have been going with.  The actual details are lifted directly from the normal Strange figure as well.  While a different expression or something might have been nice, this is perfectly acceptable.  Like his pack-mate, Strange’s only extra is the display stand, which is a little frustrating on a figure that’s all parts re-use.  A flight stand or something would have been nice.

THE ME HALF OF THE EQUATION

Like the last two sets, this pair was a Valentine’s Day gift from Super Awesome Girlfriend.  This set is definitely less essential than the last two, but I find myself really liking it.  Lucian’s a cool minor character, and we finally get Strange in one of his more important looks (and you can probably pass this off as comic version if you really want to).  All in all, this is a pretty fun set.

#1237: Black Queen Jean Grey

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

BLACK QUEEN JEAN GREY

MARVEL LEGENDS (HASBRO)

I’ve spend the last week and a half hunting for the latest X-Men-themed series of Marvel Legends, which means I’m really in the mood to review some X-Men Legends.  Unfortunately, I haven’t exactly had much luck with finding those particular figures, so I’ll have to dig into my back catalogue to make up for it.  So, today I’ll be looking at one of Hasbro’s earlier X-Men figures, Black Queen Jean Grey!

THE FIGURE ITSELF

Black Queen Jean Grey was released as a Toys R Us exclusive, in between the 2nd and 3rd series of Hasbro’s first run with Marvel Legends.  She was one of three such figures that year, and also one of the two of those three to be built on this particular body.  The figure stands about 6 inches tall and has 29 points of articulation.  This version of Jean was mostly created to get an extra use out of the Series 1 Emma Frost mold.  Without getting into it too much, the Emma Frost figure isn’t exactly popular with fans.  Were it not for the Legendary Riders Scarlet Witch, she’d easily be the most hideous Marvel Legends figure ever produced.  The body is oddly lanky in all the wrong places, has incredibly obvious joints and large hands, and just generally looks pretty fragile, not befitting the usual depictions of Emma in the comics.  So, the fact that this figure was built on that body was not particularly a point in its favor.  Also, it’s worth noting that, while Emma’s and Jean’s designs were originally pretty close, the Emma figure from Marvel Legends was based on her Astonishing X-Men design, which was a fair bit different from the design Jean was sporting as Black Queen.  The corset’s too short (and not actually a corset if you look closely), and she’s wearing pants, rather than the tights she had in the comics.  With that said, there are some new pieces that sort of help bridge the gap between designs.  The figure gets a new head sculpt, as well as a slightly tweaked clasp on the cape, to remove the original figure’s X-logo (of course, the one on the waist still remains, but whatever).  The head does a lot, and I mean A LOT, to carry this figure, despite the flaws of the body.  It’s definitely some top notch work, and easily the best work Hasbro put out in their first few years with the license.  It manages to capture the character of the Black Queen incarnation of Jean pretty much spot on, with that incredibly devious look she was sporting for most of her time in the identity.  It’s really good work.  The paint also does a lot of the heavy lifting in terms of saving the figure from the body sculpt.  The over abundance of black helps to hide a number of the inaccurate details, as well as masking the joints and making the whole body flow just a bit better.  The paintwork is generally pretty cleanly handled, without too much bleed over or noticeable slop.  He palette is still flat, like a lot of the early Hasbro stuff, but it’s actually okay on this figure.  Jean was packed with a whip accessory, which I misplaced at some point over the years.

THE ME HALF OF THE EQUATION

I found this figure when it was brand new, at a Toys R Us that no longer exists.  I can’t even say why I was there, truth be told, since TRU was going through a particularly depressing period where they stocked absolutely nothing anyone was interested in.  At the time, all of my Legends figures were coming from Cosmic Comix, KB Toys, or Walmart.  But, I was in a TRU, and they had this figure, so I got her.  After the Emma Frost and X3 Jean Grey figures, this was the first figure to make it clear that not *every* female figure from Hasbro was going to totally suck.  Despite her questionable origins, this figure is actually pretty great, and shows how much of a difference a simple palette swap can make.

#1230: Hulkbuster Iron Man

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HULKBUSTER IRON MAN

MARVEL MINIMATES

hulkbusterimmate1

One of the cool things about Iron Man (and one of the most toyline-friendly things about Iron Man, as well) is the ability for creators to come up with story or mission-specific armors to suit whatever needs they had.  In the ‘90s, this came to a head with the Modular Armor (probably my personal favorite Iron Man armor), which was by design meant to allow for customization via armor add-ons.  While many of the derivations of the Modular Armor were rather short-lived, the Hulkbuster armor (first debuting in Iron Man #304) was a favorite of just about everyone.  Since it’s introduction in the ‘90s, there have been  no less than three updates to the design, and it’s made its way into just about every Iron Man toyline, and most forms of media.  So far, it’s made four appearances as a Minimate, and today I’ll be taking a look at the first of those.

THE FIGURE ITSELF

hulkbusterimmate2Hulkbuster Iron Man was released in the seventh TRU-exclusive series of Marvel Minimates, as part of a two-pack with Gamma Hulk.  The set was timed to coincide with the release of Series 36 of the specialty line, which was a comic-based assortment, itself designed to tie-in with the release of Iron Man 2 that summer.  The figure is built on the standard ‘mate body, but with the add-ons, he comes close to 3 inches tall and he has 12 points of articulation.  The armor is based on the second iteration of the Hulkbuster, from around the time of the “Extremis” arc, which is a popular choice for Hulbuster figures (and it was the one DST chose for their Marvel Select Hulkbuster as well).  It’s not my favorite Hulkbuster design, but it’s far from a bad one, and it was still more or less current at the time of the ‘mate’s release.  The figure uses add-ons for the helmet/torso, pelvis, hands, thighs, and boots.  All of these pieces were new to this particular figure, but they’ve been privy to reuse in subsequent years.  The best work is definitely in the hands and feet, which are pitch-perfect recreations of the comic design, and exhibit some really great mechanical detailing.  The rest of the pieces are pretty decent too, and I quite like the flip-up helmet piece on the torso.  Of course, it’s at the cost of some of the detail on the faceplate, but it’s not an awful amount of loss.  The paintwork on the figure is passable; it’s from just after the move to make most Iron Man ‘mates all metallic, which means there were still some lessons to be learned.  Namely, the gold is the sort of paint that doesn’t hold up very well to the test of time, which is why my figure looks really worn down.  Still, the red’s pretty nice, and the finish is really clean (also, while the boots look like a different color in the photos, they don’t look that way in person).  Under the torso armor, ther’s a fully detailed torso and head, made up to look like the Extremis armor, which is a pretty cool touch. 

THE ME HALF OF THE EQUATION

The Hulkbuster (and his pack ‘mate) was the last set of Minimates I ever bought from what was my local Toys R Us growing up.  I happened to stop in on my way home from work, and found the set.  It was only upon the cashier ringing the set up and applying a discount and sharpie-ing an “x” across the UPC that I realized the store was in the midst of closing down. It was kind of a sobering concept.  Of course, a month after they closed, another TRU opened right across the street, so it was something of an exercise in futility, so whatever.  I ended up giving the Gamma Hulk to my brother (since he’s a big Hulk fan), and keeping this guy for myself.  He hasn’t perhaps aged the best, but he was a pretty cool ‘mate for the time, and is still a solid ‘mate overall.

#1222: Havok & Storm

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

HAVOK & STORM

MARVEL MINIMATES

havokstormmm1

Hey, it’s been a month since I reviewed any Minimates.  That’s statistically too long a period given the make-up of my collection.  Guess I better review some more.  Today, I once again turn the Marvel license, looking at some comic-themed ‘mates (a bit of a rarity these days), based on more classic designs no-less!  So, let’s dive head-in and take a look at Havok and Storm!

THE FIGURES THEMSELVES

Havok and Storm were released in the 14th series of TRU-exclusive Marvel Minimates.  This pair in particular was designed to complete the Outback X-Men line-up released in Series 47 of the main line, which hit right around the same time.  Why they chose to pack these two together is anyone’s guess, since it’s not like Havok and Storm have a lot of history, but I’m not really going to complain.

HAVOK

havokstormmm2This marked Havok’s third entry as a Minimate, and his second comic-based ‘mate.  He’s more or less wearing the same costume as his first comic ‘mate, though if you want to get *really* technical, that ‘mate was in his ‘60s costume and this one is in his ‘80s one.  Not a lot of differences, but they’re there.  Also, it had been almost a decade at this point since his first ‘mate’s release, which would have made completing the team a bit difficult for newer collectors.  The figure is built on the usual ‘mate body, so he’s about 2 1/4 inches tall and he has 14 points of articulation.  He’s got one add-on piece for his mask, which is a separate piece this time, as opposed to being just painted on.  I like the sculpted design a bit better, and I also appreciate that they’ve gone for the slightly more splayed design of the antenna he was sporting in the ‘80s, thereby making him more specific to this team line-up.  In terms of paint, he’s a step-up from his predecessor in some ways, but a step down in some others.  The mask is rather on the sloppy side, which is frustrating.  Also, he’s saddled with a screaming expression again, although at least this time you can swap out the head under the mask for a calmer one for another ‘mate if you want (I find that the Series 38 Iron Fist works pretty well).  The added muscle detailing on the torso and legs is definitely nice, as is the clean detailing his energy tracker on his torso.  I do somewhat miss the printed energy detailing of the last figure, but the accessories make up for that.  He included a brand-new effect piece to simulate his powers, which is the same piece that would be modded to be Banshee’s scream effect.  He also includes a spare hair piece for an unmasked look.  He does NOT include the pictured display stand; I just forgot that wasn’t always a standard piece when I was taking this picture.

STORM

havokstormmm3As much as I love Havok, there’s no denying that this set’s heavy hitter is Storm.  This marked Storm’s seventh time as a ‘mate.  Unlike Havok, this isn’t a repeat of an earlier design, although it shares a few design elements with a few prior ‘mates.  This is her post mohawk look, but her pre-90s-shoulder pads look.  It doesn’t quite have the staying power of a lot her designs, but it’s decent enough, and shown up in a few toy lines over the years.  The figure uses add-ons for her hair, glove cuffs, and cape.  The cuffs are re-used from Battle-Damaged Spirit, but the rest of the pieces were new.  Both pieces are decent enough.  The hair doesn’t have the ears sculpted like most ‘mate hair pieces, which is a little odd, but it’s otherwise pretty solid.  The cape is okay, but seems a little on the stiff side.  In terms of paint, she’s not bad.  The glossy sheen on the black is a nice touch, and I like the bright grey detail lines.  The gold could probably stand out a bit more, and the skin tone could do with a more organic hue, but the application’s all pretty great.  Storm includes a pair of electricity effect pieces (the same ones included with six of her other ‘mates), as well as a flight stand.

THE ME HALF OF THE EQUATION

Okay, so Havok’s one of my favorite X-Men, so as soon as these figures hit, I made it a point to get this set.  I ordered them from TRU’s online store, which, as with most of the times I’ve done so, was quite an ordeal.  Of note, neither they, nor the other set I ordered (Heather Hudson & Box, for those who are curious) was actually listed under their name, instead being given the generic title of “Marvel Minimates 14: Figure.”  Fortunately, a kind soul over at the Minimate Multiverse provided the group with the SKUs, so I was able to determine which set I was ordering that way.  Havok is awesome.  A definite improvement over the prior release.  Storm is alright; hardly my go-to version of the character, but a solid ‘mate nonetheless.