Author Archives: Ethan Wilson

#0454: Hershel Greene

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HERSHEL GREENE

THE WALKING DEAD

Being a rather dark, usually bleak show, The Walking Dead is the kind of television show that needs to have some sort of moral compass, generally present in one character in particular. Unfortunately, on a show such as TWD, moral people don’t always hang around the longest, so it’s a role that has been handed down a few times. Perhaps the character to best fill the role is Hershel Greene, the subject of today’s review. He stared out jaded and harsh, but after about a season on the show, he grew into one of the most genuinely loveable characters on the show. McFarlane has seen fit to add him to their line of figures, so I’ll be taking a look at that figure today.

THE FIGURE ITSELF

Hershel is part of Series Six of the TV-based The Walking Dead line. The figure is about 5 inches in height, with 26 points of articulation (or 25, depending on which leg you use). Hershel’s appearance is based on his look from the show during the third and fourth seasons. The figure depicts Hershel following the loss of his leg. It’s a good look for Hershel, and it’s definitely the look I’d associate with the character while he was at his best. The figure has an all-new sculpt, although it’s worth noting that the majority of this figure will be re-released in Series Seven, along with a new head. Simply put, Hershel’s sculpt is fantastic. The head is the spitting image of actor Scott Wilson, and every inch of the figure is covered in some really great detail work, and all of the proportions are right on. In his default setup, Hershel has a stump where his right leg used to be. The leg is well done, and looks like a partial leg, so… umm… there’s that I guess. Paint can be spotty on the TWD line, but it doesn’t seem to have affected Hershel here. All of his paintwork is nice and clean, with no real slop or bleed over. He also got some incredible texture work, especially on his clothing. And, in what may be a first for this line, no wonky eyes! Yay! Hershel comes packed with a set of crutches, an alternate false leg to swap out for the “stump”, and a small handgun that goes in the holster on the front of his belt. The crutches are great, and he can actually balance on them, which is cool. The alternate leg is great for the season four look, and it swaps out nicely. Hershel has a little trouble holding the gun, but he wasn’t exactly known for his shooting, so that’s okay.

THE ME HALF OF THE EQUATION

Like Carol, Hershel was a purchase from Cosmic Comix. I wasn’t quite as excited for Hershel as I was for Carol, but he’s still one of my favorite characters from the show. This figure surprised me. I thought he’d be okay, but this figure may well be the best one in the line. He’s that good!

#0453: Carol Peletier

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CAROL PELETIER

THE WALKING DEAD

The Walking Dead television show has grown into something of its own beast. While it’s still following the comic in a few respects here and there, for the most part it’s taken a path all its own. The show has made a lot of its changes through characters who weren’t around in the comics, but occasionally they make changes to comic characters that are for the better. Case in point: Carol. In the comics, her character never really amounted to much of anything. In the show? She’s easily become one of the most important characters. And for good reason; she’s pretty darn awesome! McFarlane Toys has seen fit to add Carol to their line of figures based on the show (and there was much rejoicing!)  I’ll be taking a look at that figure today.

THE FIGURE ITSELF

Carol was released as part of Series Six of McFarlane’s TV-based The Walking Dead line. The figure is just shy of 5 inches tall and she sports 25 points of articulation. Most noteworthy, she has the new style of hip joint, first used on Daryl, which is a serious improvement over the Series 4 figures. Like many of the characters on the show, Carol’s look has gradually evolved. This figure is based on her look around the end of season 4/ beginning of season 5. It depicts her after she’s grown a bit more comfortable in the post-apocalyptic world. Gone is the really close cropped hair; in come the combat boots! It’s a pretty great look. In order to facilitate this look, McFarlane has given Carol an all-new sculpt. I have to say, I’ve warmed up to this sculpt a fair bit since first getting the figure. That aside, the sculpt isn’t quite as good as some of the others in the line. Overall, the proportions aren’t too bad, though she still has the skeletal looking wrists that plague most of the line. Most of the issues are with the head. It’s not terrible, though it seems to lack some of the more attractive features of Melissa McBride’s face. I can’t really point to anything specific, but something seems off. I don’t know. Another reason that diagnosing troubles with the sculpt is difficult is the paint work. The face really seems to get the worst of it. The eyebrows seem a bit misplaced and the eyes are too small and too close together. Also, her hair has too much black in it, which just further throws off her look. The weirdest bit of the paint is the black dots on her nostrils; I’m not sure what the idea was here, but it just ends up looking strange. All that said there are areas where the paint is magnificent; some of the detail on the clothes is really great. Carol is packed with a revolver (which is also sculpted tucked into the front of her belt), he signature knife, and a gas can, which has actual, readable instructions on how to use it! That’s quite impressive.

THE ME HALF OF THE EQUATION

Carol was purchased from Cosmic Comix, my comicbook store of choice. I’ve been anxiously awaiting the release of the Carol figure pretty much since she was announced, so I picked her up as soon as I saw her. While I have a fair share of complaints about the final figure, as a whole I think she turned out okay. She looks nice with the rest of the group and the figure’s really started to grow on me since getting it.

#0452: Future Wolverine

Posted by Ethan Wilson in Reviews and tagged with , , , ,

FUTURE WOLVERINE

MARVEL MINIMATES

Alright, the Christmas reviews appear to be done (though, as last year showed, looks can be deceiving on that front), so now it’s time to get to the glut of pre-Christmas purchases still awaiting review! That ends up being a fair number of Minimates (and other mini-figures). Bear with me. Up first is another figure from the ever plentiful Marvel Minimates line. There were quite a few releases in that line this past summer, so I had to do some picking and choosing. Fortunately, end of the year sales are good for allowing some catch-up. Today, I’ll be taking a look at one of the Wolverines released to tie-in with last year’s X-Men: Days of Future Past.

THE FIGURE ITSELF

Wolverine was released in Marvel Minimates Series 58, which was based on the Days of Future Past movie. He was originally packed with Storm, but I don’t have her. What’s more, he was originally slated to be released with Rogue, but then she was cut out of the movie. Not that any of that matters for this review. Wolverine is one of two versions of the character released in Series 58. This one, as the name at the top of the review implies, is based on the version of the character from the future timeline. The costume is a variation the black uniforms sported by the X-Men in all but First Class, though this time around it’s more practical than the previous leather costumes, and it has a bit more color. The figure is roughly 2 ½ inches in height and he sports the standard 14 points of articulation. He’s built on the usual Minimate body, with a set of clawed hands in place of the normal ones and an add-on for the hair. Both the hands and the hair are re-use from the Wolverines in Series 52. Your Super Awesome Girlfriend loves you very much. They’re a good approximation of the look from the movies, and the fact that they’re the same as the ones from the movie-based Series 52 figures adds a nice bit of continuity. The rest of the figure comes down to paint. Fortunately, the figure has some very nice paintwork. This is a design that could have been phoned in, but DST really did well here. All of the armor is outlined by highlights, and all of the color accents are in the right places. Wolverine has his DOFP-trademarked white sideburns, which, while perhaps a bit too bold, are cleanly done. To top it all off, the face is one of the better Hugh Jackman likenesses we’ve seen on the many Minimate incarnations. Wolverine included a clear display stand and nothing else. It would have been nice to get a spare set of hands, but it’s not like black hands are a rarity.

THE ME HALF OF THE EQUATION

I passed on Future Wolverine when he was first offered for a few reasons, though none really related to him. First of all, he was packed with the movie version of Storm, who I don’t have a real desire to own, and second, my local comicbook store didn’t have the set, preventing me from any pesky impulse buys. Recently, I’ve gotten into the habit of buying one loose Minimate at random from Luke’s Toy Store, just for the novelty. So, when I ordered a few things during his Cyber Monday sale, this was the random Minimate that arrived. I actually really like this figure. It’s simple, but very effective.

#0451: General Grievous

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

GENERAL GRIEVOUS

STAR WARS: REVEVENGE OF THE SITH

Here it is, Day 14, the last day of the Christmas Reviews. Today, I’ll be sticking with what I started yesterday: Star Wars reviews. Yep, it’s another SW prequel figure. This time around, it’s another of the characters I could actually tolerate, General Grievous (aside from the name. The name always bothered me. Seriously, his name’s just an adjective! What’s next, Savage Oppress? Oh, wait…) Grievous, like so much of the prequel stuff, was a good idea at the start. He’s got a cool design, an interesting enough backstory, and he had those four lightsabers! And then he went out like a punk. Well, at least he was in good company! Let’s look at the figure.

THE FIGURE ITSELF

Grievous was part of the first (and only) series of Star Wars: Revenge of the Sith 12-Inch figures. He’s a little over 12 inches in height (though not as over as he should be) and he features 17 points of articulation. I always marvel when companies manage to get less articulation into a character that has obvious joints built into their look. How do they miss the obvious joints? Anyway, the figure’s based on the character’s “live-action” appearance in Revenge of the Sith, which is, as I said in the intro, a pretty decent design. The sculpt of the figure is actually very well done, and it’s certainly above what Hasbro usually offered in this scale. For the most part, the sculpt follows the movies design pretty faithfully; the proportions all seem right, and all the little details and intricacies are present. The figure’s arms have been constructed so as to allow them to split as they do in the movie, and I believe this is the only of Hasbro’s figures of the character to actually do this the right way. Sadly, there isn’t really any mechanism to keep the arms together, so you have to fix them a lot. It’s also worth noting that, due to the lack of proper articulation, the figure is a bit pigeon-toed, which can make him difficult to stand. Given the character’s somewhat unique design, he’s mostly lacking the usual clothing seen on the 12-inch Star Wars figures. He does, however, get a rather nice cloth cape. It’s got two layers of fabric, so as to properly convey the two-toned nature of the cape, and it even has the pattern on the back like it does in the movie. It can easily go on and off of the figure, and it stays in place very well. The figure also has more paintwork than the average 12-incher. While it’s a bit basic in some areas, particularly the silver parts, there is some very nice work, especially on the lighter armor parts and around his eyes. Grievous included four lightsabers: two blue, two green. Unfortunately, due to the softer plastic used for his lower arms, it’s impossible for him to actually hold any of them.

THE ME HALF OF THE EQUATION

Like Obi Wan, Grievous was a Christmas gift from my pal Phil. What’s interesting about Grievous is that I fully intended to buy this figure when it was originally released. I wasn’t terribly impressed by the movie, but I remember seeing this guy on the shelf and thinking he looked pretty cool. But, then I never got around to it, and he vanished from shelves, so I didn’t think about it. I was quite happy to unwrap this figure after all these years. While the articulation isn’t the best and the plastic could be a bit stronger, there’s no denying that this is a pretty great looking figure.

#0450: Obi Wan Kenobi

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

OBI WAN KENOBI

STAR WARS: ATTACK OF THE CLONES

Today is Day 13, the penultimate day of my Christmas Reviews. In these last two reviews, I’ll be moving away from the Aliens and Doctor Who stuff. Instead, I’ll be focusing on that galaxy far, far away.

Generally speaking, I’m not much of a fan of the Star Wars prequels. To paraphrase the wonderful Hayden Christensen, they’re coarse and they get eeeeeverywhere. But, they aren’t completely without their merits. For one thing, the toys didn’t suck too badly (though some were worse than others.) And some of the actors made the best of their roles. One such actor was Ewan McGregor, who portrayed a younger version of Alec Guinness’s Obi Wan Kenobi. He did his best not to let that role suck (even when he was dealing with words like “midiclorians” or “younglings.” Eughghh!) and he ended up being tolerable for most of the three films’ runtime. So, let’s look at an Obi Wan figure.

THE FIGURE ITSELF

Obi Wan here was released as part of the first series of Star Wars: Attack of the Clones 12-inch figures. As you can probably gather, that means he’s based on his appearance in Attack of the Clones, which is alright, I suppose. The figure is 12 inches tall and features 22 points of articulation. Obi Wan’s underlying body is the standard Star Wars 12-Inch body of the time. Sadly, while Hasbro’s own GI Joe line had made leaps and bounds worth of improvement to its base body, the SW body was rather behind, even when this was released. It’s needlessly chunky, and the arms are noticeably stubby. And that’s not even touching on those oven mitts he’s got for hands! By Series Two of this line, they’d moved on to a better body, but not here. The figure has a uniquely sculpted head, as well as boots and a belt. The head is a passable resemblance to Ewan McGregor, which is more than can be said about most of the Kenobis offered for Attack of the Clones. The details are a little soft, but not too bad, especially when you’re dealing with rotocasting. The belt and boots are very nicely detailed, with lots of nice textures and such. The figure’s clothing is done with actual cloth, as is the standard for most 12-inch figures. It’s actually surprisingly well-tailored, although that body isn’t doing it any favors. The figure’s paint is minimal; it’s mostly on the head. What’s there is rather cleanly applied, and it seems all the colors are pretty spot on. Obi Wan is armed with a lightsaber that features a removable blade.

THE ME HALF OF THE EQUATION

Obi Wan was a Christmas gift from my good pal Phil. Phil and I frequently have discussions about our various Star Wars toys, so this was a pretty cool gift. What’s also kinda neat is that this is the only one of the three Series One figures that I never got (The Clone Trooper and Anakin were also given to me as gifts, years ago). Though the figure won’t be winning any awards for ingenuity or anything, but it’s not terrible figure. Opening him up filled me with a nice little twinge of nostalgia, which was really cool!

#0449: Alien Big Chap

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ALIEN BIG CHAP

S.H. MONSTERARTS

We’ve made it to Day Twelve of the Christmas Reviews and after today, there are just two days left. Today marks the last of the Alien-themed gifts from this year. This time around, it’s a slightly different type of Alien figure. This one comes from Bandai Japan’s S.H. MonsterArts line, which is a Monster-themed spin-off of their main FiguArts line. Usually, the line focuses on Japanese creatures, such as Godzilla, but in the last couple of years they’ve added a healthy dose of Alien and Predator figures. Today, I’ll be looking at their version of the original Alien, the Big Chap!

THE FIGURE ITSELF

As noted above, the Big Chap was released as part of the S.H. MonsterArts line. Like many of Bandai’s higher-end figures, the Big Chap is not part of a larger series or assortment; he’s a single release. The figure is about 5 ½ inches tall and features an astounding 61 points of articulation (20 of that’s in his tail!). Technically, he’s based on the creature from the first Alien movie, though, like Funko’s recent Metallic Alien, he’s actually based on the initial design of the Alien, prior to filming beginning and the dome being “misted.” Prototype shots show the dome looking like it does in the movie, but it’s completely clear on the final figure. I don’t mind, but I’m curious as to why they decided to change it. The Big Chap’s sculpt is very nicely done, and all of the detail work is nice and sharp (quite literally in some cases). There’s a definite style to the figure, which makes it fit in with the other MonsterArts figures, even if it has a unique design. The design is a little lankier and more bug life than the “real-life” Alien, which is properly in line with the idea of this being a “concept” figure. The figure sports die-cast metal pieces for the elbows, knees, and the tip of the tail. In the case of the elbows and knees, it helps make the figure a little bit sturdier, and in the case of the tail, it makes it appropriately strong and sharp. Like all the best Alien figures, it also has a secondary mouth, which you must “Please pull out in a state of downward face” according to the included instructions (which are a fantastically entertaining read, by the way. Did someone on staff just say “Hey I sort of know some English” and then have nobody double-checked them?) The piece is very nicely sculpted, though it would be nice if it were a slightly tighter fit; it kind of flops about as it is. Like so many Alien figures, there’s not a whole lot to be done with the paint, but what’s there looks nice. For the most part, the figure’s molded in black plastic, with a heavy silver dry brushing applied to help bring out the details. There’s also some pretty good paintwork on the skull under the dome, as well as some nice silver detailing on the claws, toenails, and teeth. The Big Chap included a spare set of hands, in a more gesturing pose than the regular pair, and a display stand. The stand is cool enough, though I’m a little thrown off by the splattered paint design of it, which doesn’t really fit with the style of the movies at all. But I guess it looks pretty cool.

THE ME HALF OF THE EQUATION

The Big Chap here was a Christmas gift from my boy Tim. Tim’s well aware of my Alien obsession, and had asked me a few months back whether the Aliens I owned were all NECA, in preparation for ordering this figure. As far as Alien figures go, he chose pretty well. This is a really great version of the original Alien. Plus, there’s that fantastic reading material too!

#0448: Carol Peletier

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

CAROL PELETIER

FUNKO POP!

For Day Eleven of the Christmas Reviews, let’s have a look at something a little (but not totally) different. The Doctor Who reviews have wrapped up and the Alien reviews will be finishing up tomorrow. So, today, I’ll be taking a look at another Funko Pop! figure, this time based on the widely popular comicbook turned TV show The Walking Dead. It’s a figure of one of the show’s rising stars Carol Peletier (whose last name I did not know until I owned this figure. So there.)

THE FIGURE ITSELF

Carol is figure #156 in the Funko Pop! Television line. This version is the Hot Topic exclusive blood splattered version. The figure is about 3 ½ inches tall and she has the requisite one point of articulation. It may not be much, but at least it’s consistent. Carol is based on her season 4/season 5 appearance. It’s a good choice because that’s when she truly becomes awesome. The design has been adjusted to fit into the Pop! style. It’s not a style that works for every character, but it works rather well for Carol. The sculpt is surprisingly well detailed for this style of figure. Her clothes are loaded with lots of wrinkles, to give them the appropriate worn look. She’s also got very nicely detailed boots, with all the proper straps and such. She’s even got her knife sheathed on her belt! Like many Funko offerings, this figure’s weakest point is its paint. Granted, Carol’s paint is a fair bit better than most other Pop! figures I’ve seen. Overall, the paint is alright, but there are a few areas with bleed over and fuzzy lines. Fortunately, this figure’s blood splattered look helps to hide some of the rougher spots of paint. Speaking of the blood splatter, it really adds to the figure. It’s very nicely done, and it gives her that messy look that one expects from a survivor of a zombie apocalypse.

THE ME HALF OF THE EQUATION

Carol is yet another gift from my Super Awesome Girlfriend Jessica. This one marks a change of pace from the Doctor Who theme present in all of her other gifts, but variety’s never a bad thing. Carol is one of my favorite characters on The Walking Dead (and Mellissa McBride is a pretty awesome person outside of the show), so I’m pretty thrilled to have her in figure form!

#0447: Aliens Minimates

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

CARTER BURKE, PVT WIERZBOWSKI, PVT SPUNKMEYER, ALIEN WARRIOR(S), ATTACKING ALIEN WARRIOR(S), & BATTLE DAMAGED ALIEN WARRIOR(S)

ALIENS MINIMATES

Today’s review marks Day Ten of my Christmas Reviews. If you were thinking there hadn’t been enough Aliens stuff, you’re in luck! If you’ve grown tired of Aliens, that’s unfortunate. You may have chosen the wrong action figure review site. Sorry!

It’s my opinion that Aliens is the greatest movie ever made. If I were pressed to pick my favorite toyline, I think Minimates would be the obvious answer. So, how do you make the greatest toys of all time? Well, putting it lightly, Aliens Minimates. There, I was able to get through that all calm. I totally didn’t break into hysterics over the fact THAT THERE ARE TOTALLY ALIENS MINIMATES!!!! THAT’S A REAL THING!!!! HOLY CRAP!!! ….Sorry about that. So, um, yeah. There are Aliens Minimates, and I’ll be taking a look at those today!

THE FIGURES THEMSELVES

These figures make up the first assortment of Aliens Minimates to be offered. Typically, I only review Minimates one set at a time. However, they all kind of make up one “set” of figures, so I’ll be keeping them together. These figures were released as the “Aliens VS Marines Army Dump.” The Army Dump is something that’s been done a few times before with Minimates. Essentially, it’s a case of 12 single-packed Minimates, where there are a few variations of an army builder packed in a few times, with a small number of unique characters, each packed one per case. In this set, there are three styles of alien warriors that take up nine of the slots collectively, and the remaining three slots are filled by Marines Wierzbowski and Spunkmeyer, and Weyland-Yutani employee Carter Burke.

CARTER BURKE

Can you get much sleazier than Carter J Burke? Not much. Dude’s just the worst. But Aliens need victims, so here he is! Burke here is easily the highest profile human character in this set, so he’s got that going for him. The figure is about 2 ½ inches tall and he has 14 points of articulation. He’s based on the look Burke sports for the majority of the movie. In a world of the coolest looking set of Space Marines imaginable, Burke’s a guy in a flannel shirt a vest. Real winner this one. It’s definitely the definitive look for the character, so it’s a good choice. Burke is assembled from the standard Minimate body, with add-ons for his hair, vest, sleeves, and wrist watch. The hair was previously used on the Ghostbusters Janosz, the sleeves first appeared on The Spirit, and both the vest and the watch are re-used from Knight Rider’s Michael Knight. Seems Burke raided Hasslehoff’s closet! For those of you following at home, you’ll note that Burke has no new pieces. He’s a great example of what you can do with re-used parts, because each piece looks spot on to the character. The figure’s paint fills me with great distress. The general application of the paint is fantastic. The figure’s face is a pretty decent likeness to Paul Reiser’s portrayal of the character, and the work on the flannel shirt is nothing short of astonishing. So, what’s the problem? Well, a combination of things. Seems the plastic on the hip joints is a little on the weak side. Combine that with some sticky paint, and you’ve got a Burke with two broken hip joints, which is what happened to mine. Fortunately, I was able to get a replacement set of legs (shout out to Minimate Multiverse member Bilbofett! Thanks so much!), but it’s a shame that this happened. Burke’s sole accessory (unless you count the ooze coming off his slimey personality) is a clear display stand.

PVT WIERZBOWSKI

Ah, Wierzbowski. The marine that is never actually on screen, but that everyone remembers because of his funny name being shouted several times during the big hive fight. I gotta be honest, the fact that Diamond is leading with Wierzbowski shows a commitment to this line that no other action could. Wierzbowski is about 2 ½ inches tall and he has 12 points of articulation. He’s built on the standard Minimate body, with add-ons for his helmet, chest armor, and boots. The add-ons are new to this figure and they offer the first glimpse at the pieces that will be used on future Marines. Simply put, they’re fantastic. Early images had me worried the armor might be too bulky, but that’s certainly not the case in person. Each piece of armor is a fantastic miniaturization of the movie’s designs. Wierzbowski’s paint work, while very good, does have a few issues that hold it back. The detail work is all nice and sharp (though I can’t speak to the quality of the likeness, not having seen the guy’s face). The fully detailed camo uniform under the armor is definitely a nice touch. However, the camo is only present on the front of the torso, leading to a jarring change when he’s viewed from the side. Also, the green chosen for the armor seems to be a bit too bright, which looks off. Neither of these is really a figure ruining issue. It would be nice if they could fix the camo thing on future marines. I don’t see the shade of green changing, mostly for consistency’s sake. Wierzbowski includes a fantastically sculpted pulse rifle, as well as an alternate hairpiece (originally used on the first Marvel Now! Hulk) and a clear display stand.

CREW CHIEF PVT SPUNKMEYER

Spunkmeyer is probably more notable than Wierzbowski, though not much. He’s totally absent from the definitive hive battle, and he’s nowhere near as memorable as his co-pilot Ferro. Like Wiezbowski, he’s mostly remembered for his odd name. In fact, when I first saw the pictures of these figures, I kinda though he was Lt. Gorman. Spunkmeyer is roughly 2 ½ inches tall and he has 14 points of articulation. Structurally, Spunkmeyer uses the standard Minimate body, with a sculpted helmet piece. It’s not bad, though it seems a touch too large. We don’t see him wearing it very much, so that might be throwing me off. The rest of Spunkmeyer’s look is done via paint. The detail lines are nice and sharp and he has a passing resemblance to the actor who plays him. The base paint isn’t quite as good. There’s more than a few wavy or fuzzy lines. That said, they got the colors right on this one, which is nice. Under his helmet, Spunkmeyer has a fully detailed shaved head, stubble and all. I wish that he didn’t have a peg hole in his head, but that seems to have been a necessity of the helmet. Spunkmeyer includes a handgun and a clear display stand.

ALIEN WARRIOR(S)

As I said in the into, this set offers three different varieties of the titular creatures. The first one is the basic Alien Warrior. There are four of this particular Alien in the set. The figure is about 2 ¾ inches tall and features 16 points of articulation (the additional two points are courtesy of the tail). Obviously, the Alien Warrior is based on the appearance of the creature in the second film of the franchise. The figure uses the basic Minimate body as a starting point, with all-new sculpted pieces for the torso, head, hands, tail, and feet. All of these pieces are exquisitely sculpted, with tons of small detail work. This version of the Alien has a closed mouth, which looks almost like an evil grin here, due to the stylizing of the character. What’s truly amazing about the sculpt is how it stays true to both the original design and the Minimate aesthetic. It’s very clearly the Alien, but it’s also very definitely a Minimate. That takes effort. The figure’s paint is on par with the sculpt. Diamond could have easily just relied on their sculpt for the creature’s details and left the paint a basic black, but they didn’t. Every flat surface has a plethora of texturing and detailing that perfectly captures the design in two dimensions. The figure also features some silver detailing to bring out the claws, toenails and teeth of the creature. The Alien Warrior includes a clear display stand.

ATTACKING ALIEN WARRIOR(S)

The second variation of the Alien Warrior is the “Attacking” version. There are three Attacking Aliens in the set. Like the regular Alien Warrior, this figure is about 2 ¾ inches in height and it has 16 points of articulation. From the neck down, all of the sculpted pieces on this figure are the same as those on the regular Warrior. The key difference is the head. While the regular version had a closed mouth, the Attacking Alien has its mouth open and its inner mouth sticking out. This depicts the Alien in one of its most distinctive looks, which is definitely cool. For the most part, the paint on this figure is the same quality as the first alien. The only difference is the addition of gray for the inner mouth. It might have been nice to get something other than a flat gray, but it’s not too bad. The Attacking Alien Warrior includes a clear display stand.

BATTLE DAMAGED ALIEN WARRIOR(S)

The last version of the Alien Warrior is the Battle Damaged version. There are two Battle Damaged Aliens in the set. The Aliens have a tendency to take some damage, so it’s a reasonable variant. The figure has the same height and articulation as the previous Aliens. Sculpturally, this one’s a little different. The hands, feet, and tail are the same as the other two Aliens. The head is that of the Attacking Alien, with the inner mouth removed, and the torso is the same as the previous two aliens, but with the back tubes shortened, as if they’ve broken off. The other key difference on this figure is the paint. The starting point is pretty much the same as the other two, but they’ve added splashes of bright green all over the figure, depicting the creature’s acidic blood. It’s a cool effect on one figure, but I’m not sure it’s very practical for an army builder. The Battle Damaged Alien Warrior includes a clear display stand.

THE ME HALF OF THE EQUATION

These figures were another Christmas gift from my always awesome parents. I’m over joyed to have these figures in my possession. About 5 years ago, I was really into customizing Minimates, and I made my own set of Aliens ‘mates, which I was quite proud of. I’m thrilled to say that these blow those out of the water. My personal favorite of the set is Wierzbowski, just for the preview he gives of the other marines, but the Alien Warrior is very definitely a thing of beauty. I can’t wait to get more of these!

#0446: The Doctor & Clara “Oswin” Oswald

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

THE DOCTOR & CLARA “OSWIN” OSWALD

DOCTOR WHO

It’s Day Nine of the Christmas Reviews, and we’re back with that funky British Sci-Fi show Doctor Who. If you’ve been closely following the reviews up to this point, you’ll probably notice that, while I have a fair assortment of Eleventh Doctor-related characters, I don’t actually have an Eleventh Doctor. That changes today! Also of note, I’ll be rounding out the main companions of the Eleventh Doctor (well, sort of). So, let’s have a look at The Doctor and Clara “Oswin” Oswald.

THE FIGURES THEMSELVES

These two figures were released in a two pack dubbed “The Impossible Set,” which is a clever name for a couple of reasons. From a show perspective, Clara, who makes up half of this is set, was dubbed “The Impossible Girl.” But, in addition to that, what’s also somewhat impossible about this set is the scale! See, right before Clara joined the cast of the show, Character Options, who make the Who toys, decided to change the scale of the line from 5-inch to 3 ¾-inch. This meant that the first Clara figure was not compatible with all the other Who companions, which was definitely a bummer. Fortunately, it didn’t last too long, and now we have a Clara in 5-inch scale (well, sort of… I’ll get to that.)

THE DOCTOR

First up, it’s the Doctor, who’s sort of the requisite figure in this set, what with it being his show and all. The figure is about 5 ½ inches tall (counting the hat) and he has 20 points of articulation. The Eleventh Doctor was no stranger to toys, and he ended up with a fair number of them, covering many of his looks. This particular figure is not one of the Doctor’s standard looks. Instead, it’s a specific look from the Series 7 Christmas episode “The Snowmen.” That episode was the first episode following the departure of longtime companions the Ponds, so the Doctor is in a somewhat distraught state, leading to the darker colors and the lack of his signature bow-tie. The episode is set in Victorian-era London, and the Doctor’s dressed to fit in, resulting in a rather unique look for Eleven. The figure is a mostly new sculpt, though he does re-use the hands and legs of the basic version of Eleven. Generally speaking, the sculpt is quite nice. It seems a bit gangly at first, but some re-watching of Smith’s episodes shows that this is pretty accurate. I really like the amount of texture present on the figure. This is something that’s frequently absent from Who figures, but that’s not the case here. I particularly love the hat, which has the perfect well-worn look to it. The figure’s face is a decent approximation of Matt Smith, though I think they’ve made him just a bit too conventionally good looking to be a spot on rendition of Smith. While the sculpt is quite good, and certainly up to par with other Who releases, the paint seems to have taken a slight down turn. It’s not bad, mind you; just not as good as previous Who figures. Overall, the general application and the color scheme are fine. However, there are a few issues with some bleed over, and the paint just seems to be thicker than usual. I’m also not a fan of how the eyebrows look, as if they’ve been drawn on with a pencil. The Doctor’s lone accessory is his Sonic Screwdriver, which seems to be well represented here.

CLARA “OSWIN” OSWALD

So, how is this figure only “sort of” a Clara Oswald figure? Well, it’s like this: this figure is based on Jenna Coleman’s character Oswin the Soufflé Girl, who appeared in Series 7’s “Asylum of the Daleks.” The episode was written, filmed, and shown following Coleman’s casting as the next Companion, but she wasn’t playing the character she would go on to play. However, through a convoluted series of events, the end of Series 7 revealed that Oswin had been a fragment of Clara the whole time, effectively making them the same person. So, this is essentially a Clara figure, more or less. Fortunately, Oswin and Clara had similar styles of dress, so it’s pretty easy to pass this off as either of them. The figure is a little under 5 inches tall, and she has 21 points of articulation (though, I’m not really sure why they even bothered with the neck joint, as the hair renders it useless.) The figure features a unique sculpt. It’s a pretty good one, too, with nice proportions and a good likeness of Jenna Coleman. The majority of the dress is a rubber slip-over piece, allowing for it to go seamlessly across the figure’s waist, while still maintaining a fair bit of the articulation. I’m not sure how well it’ll hold up over time, but it’s good in theory. The figure’s paint is pretty good overall. Everything is evenly applied, and it’s nice and clean. There’s no real issue with slop or bleed over. I’m not sure what’s going on with the eyes, though. They were definitely trying to capture Coleman’s wide-eyed look, but her pupils are a bit low, resulting in an almost frightened look, which, when coupled with the slight smile, looks a bit frightening. Like the Doctor, Oswin includes a single accessory: her soufflé. It’s a fun enough accessory, though she can’t hold it very well.

THE ME HALF OF THE EQUATION

The Doctor and Clara/Oswin, like all my Doctor Who figures, were a gift from my Super Awesome Girlfriend Jessica. I’m really happy to have an Eleventh Doctor for my shelf, and I really like this particular look. I’m also happy to have another Companion. While I’m not the biggest fan of Clara, I actually really liked Oswin during her short appearance on the show, so this figure’s even more of a win for me!

#0445: Falcon

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

FALCON

MARVEL SELECT

Today, we make our way into the back half of the Christmas Reviews, with Day Eight. This review breaks from the Doctor Who and Aliens theme, instead turning to the Marvel Super Heroes branch of things, which is something of an “old faithful” for me.

One of my favorite movies last year was Captain America: The Winter Soldier. Like any good superhero movie, it had its fair share of toys, offering the movie’s characters in a variety of scales. My personal favorite of the bunch were Hasbro’s Marvel Legends offerings. However, there was one issue; as cool as Hasbro’s versions of Cap, Widow, and the Winter Soldier were, the line did not include a figure of Falcon, one of my favorite additions from the movie. I tried to make do with the smaller scale 3 ¾ inch figure, but he just wasn’t the same quality. Enter Marvel Select.

THE FIGURE ITSELF

Falcon was released as part of Diamond Select’s Marvel Select line. Falcon is one of the two figures they released based on CA:TWS (The other was Stealth Suit Cap). The figure is based on the character’s appearance during the final battle sequence of the film, once he’s all decked out in his full uniform. Falcon is a little over 7 inches in height (making him a full inch taller than the Legends Cap) and he features 22 points of articulation. While he’s not as well articulated as the Legends figures, he’s certainly above the standard Select figure. The figure features a brand-new sculpt, just for Falcon. Overall, it’s pretty well done. The proportions are nice, the uniform has some great texturing and layering, and the head sculpt has a decent likeness of Anthony Mackie. It’s not without its faults, though. The head could stand to be a little more textured, and I’m not really sure what’s up with the positioning of his hands. It seems like he’s meant to have something to hold (maybe his guns from the movie?) but nothing is provided, so his hands are just doing this “Kung Fu Grip” sort of thing. The figure’s paint is pretty good, though still just shy of perfect. The work on the uniform is fantastic. It’s nice and clean, and there’s some very nice, small detail work. The paintwork on the head has similar issues to the sculpt; it’s just too smooth and clean. This is especially evident on his facial hair, which almost looks drawn on. That said, the paint really isn’t bad. Falcon included a pair of wings and a display stand made to look like a piece of the Helicarrier. The wings are well sculpted, but I really wish there were a way to pose them or attach them a bit differently. As it is, they each have a square peg on the end that plugs into his back harness, meaning they can only be attached sticking straight out. Something similar to the Minimate (which allowed the wings to either be attached to the harness or held in his hands) would have been much preferred here. The stand is pretty cool, I guess, though I don’t really see myself using it much.

THE ME HALF OF THE EQUATION

Falcon was another gift from my super cool, super supportive parents. Of all the gifts I received this year, Falcon seems the most “slow burn” (in fact he was the very last of my gifts to actually be taken out of its package, almost a week after Christmas. I kinda felt bad about that,) but he’s a great figure of a great character. Sure, he’s a little too large to fit with my Legends figures, but at least he’s a cool figure in his own right. Scale I can fudge, bad figure less so.