Author Archives: Ethan Wilson

#0510: Hoban Washburne

Posted by Ethan Wilson in Reviews and tagged with , , ,

HOBAN WASHBURNE

FUNKO POP! TELEVISION

WashPop1

Alright, I looked at the Pop! take on Captain Malcolm Reynolds. But, a captain’s only as good as his crew. So, today, let’s look at the line’s take on my personal favorite Firefly character, Hoban Washburne, or Wash for short, faithful pilot of the Serenity. Let’s see how he turned out!

THE FIGURE ITSELF

WashPop2Wash is figure #137 in the Funko Pop! Television line. He’s roughly 3 ½ inches tall and he has the usual single point of articulation at the neck. Wash is sporting a Hawaiian shirt and a flight suit, both of which are signature to the character. Like Mal, I’m fairly certain this particular combo shows up in the series’ pilot episode. It sums up the character really well, so it’s a well-chosen look. He’s been fitted into the style of the rest of the line. He’s got the typical large, square head and big circle eyes, and a smaller, slightly rounder body. Whereas Mal’s head looked rather generic, Wash’s head manages to sum up Alan Tudyk’s likeness perfectly in just a few scant details. The hair, in particular, really helps to sell it. It’s cleanly sculpted, and well-shaped, and it manages to be pretty decently textured. The body is pretty well done too. He’s in a more generic pose than Mal, but he still avoids the crouching pose of earlier Pop! figures. The details of the clothes are nicely sculpted, and pretty well-defined. And, of course, what kind of a Wash figure would it be if he didn’t have a dinosaur? That’s probably the piece of the sculpt that best sells the figure as the character it’s meant to represent, so it’s really great that they threw it in there. Paint typically isn’t Funko’s strong suit, and while that’s still sort of present here, Wash is actually pretty decent. There’s still a few issues with some fuzzy lines here and there, but the work on the shirt is quite nicely done, and it certainly adds some uniqueness to the figure.

THE ME HALF OF THE EQUATION

This was actually the figure that my Super Awesome Girlfriend wanted to get me for Valentine’s Day, but he wasn’t readily available, meaning she got me Mal instead. However, while we were at Farpoint this year, my friends Tim and Jill found Wash in the Dealer’s Room and were nice enough to pick him up for me (Seriously, nothing makes me feel better when I’m sick more than people bringing me action figures. Just in case anyone was wondering…). Wash is a really great figure, and I’d say he’s one of the best Pop!s I’ve gotten.

#0509: Malcolm Reynolds

Posted by Ethan Wilson in Reviews and tagged with , , , ,

MALCOLM REYNOLDS

FUNKO POP! TELEVISION

MalPop1

For years, cult favorite show Firefly went pretty much untouched by the toy-world. There were a few figures from the movie, Serenity, but that was it. No one seemed to be able to get the license. Enter Funko, masters of possessing the licenses to literally everything ever (seriously, they must know where all of the bodies are buried), who picked up the Firefly license and quickly pumped out an assortment of merchandise in all of their various styles, including their ever-popular Pop! Vinyl line. Today, I’ll be looking at that line’s take on Captain Malcolm Reynolds.

THE FIGURE ITSELF

MalPop2Mal is the 135th figure in the Funko Pop! Television line. The figure is about 3 ½ inches in height, with the standard one point of articulation at the neck. It’s not a lot, but that one point of movement does add a fair bit to what can be done with the figure. Mal is based on his standard coated look from the show, though it’s worth noting that he’s sporting a pair of gloves, which he only wore from time to time on the show. I think this might be meant to more represent his look in the pilot episode. Regardless of exactly where it’s from, it works as a decent summation of the character. The look has, of course, been reworked into the Pop! style, so he’s got the usual big square head, circle eyes, and no mouth. While some Pop!s are pretty good at conveying an actor’s likeness in these limited features, this one’s a little more on the generic side. It could still certainly be Mal/Fillion, but it doesn’t jump out immediately. Fortunately, the rest of the figure does a pretty great job of conveying the character. All the details of the clothing are nice and sharp, which is good to see. Furthermore, the figure moves away from the usual Pop! semi-crouch pose, instead opting for a much more character-appropriate look. It really sells this as Mal, and it’s refreshing to see Funko moving away from the more generic poses they were doing for so long. The weakest point of any Funko figure is typically the paintwork, and Mal is no exception. That said, the work here isn’t terrible. There’s a few missed spots and some occasional bleed over, but most things are pretty clean.

THE ME HALF OF THE EQUATION

Mal here was a Valentine’s Day gift from my Super Awesome Girlfriend. I know, it’s not the usual Doctor Who! She actually wanted to get me Wash, who’s my favorite character, but she was unable to find him. Mal’s definitely a good second choice, and this figure’s certainly a lot of fun!

#0508: Cyberman

Posted by Ethan Wilson in Reviews and tagged with , , ,

CYBERMAN

DOCTOR WHO (3.75)

Cyberman1

Hey look! Another Doctor Who review. It hasn’t been that long since the last one, and here’s another one. Well, most of my Doctor Who stuff has been the 5-ich scale stuff, which is the scale that Underground Toys really stuck with for a while (and still hasn’t completely let go of, either). But, nowadays, the line’s made a transition to a smaller 3 ¾ inch scale. A while back, I picked up the Tenth Doctor from that line, and he was getting a little lonely by himself. So, how about a Cyberman? Yeah, let’s have a look at that one.

THE FIGURE ITSELF

Cyberman2The Cyberman was released in the first series of the 3 ¾ inch Doctor Who line. He’s about 3 ¾ inches tall (surprising no one) and he has 13 points of articulation. That’s a bit of a step down from the Cyberman’s larger counterpart, but it’s in line with the rest of the 3 ¾ inch Who stuff. I just wish he had some waist articulation. The figure is based on the second Cyberman design from the new Who series, which premiered in Matt Smith’s last season on the show. This is the first time this design has shown up in the toyline. While it’s not quite as strong as the previous Cyberman design, it’s not bad. And, as the new standard look, it’s gonna show up some time. The sculpt does a pretty good job of replicating the show design. The details are all nice and sharp, and everything looks appropriately machined. The only nit with the sculpt is that the head is just a little bit too large, and by extension, slightly less detailed than the rest of the sculpt. Paintwork on the Cyberman is simply superb. It starts out with just a simple base level of silver paint, which is covered with a wash to bring out the details of the sculpt and then a fair bit of dry brushing to give the armor the appropriate worn-in look. The Cyberman’s loan accessory here is a DW logo base, which is the same as the one included with Ten, but in a dark blue. Which actually makes a lot more sense, color-wise.

THE ME HALF OF THE EQUATION

Three guesses as to who got this figure for me. Yep, this one’s from my Super Awesome Girlfriend. It was the last day of Farpoint, and I was rather sick and sleeping on the Con Suite (which I was totally supposed to be running). In came Super Awesome Girlfriend, who brought me two of my favorite things: Food and Action Figures! Remember how I said that Ten was lonely? Well, Super Awesome Girlfriend agreed! Ultimately, the Cyberman’s not quite as good as Ten, or even as good as the larger version, but it’s a neat little figure.

#0507: Orion

Posted by Ethan Wilson in Reviews and tagged with , , , ,

ORION

DC COMICS – THE NEW 52 (DC COLLECTIBLES)

Orion52a

What’s this? A New 52 review? On The Figure in Question? Is that right? Can we think of any more questions? We can? Should we stop? Yes. Yes we should.

Shocking as it may be, I have bought, and am now reviewing, a DC New 52 action figure. Of my own volition. Nobody’s pointing a gun at me or holding my family hostage or anything. Of course, it’s still me. Did I buy a Batman or a Superman or something? Of course not, that would be dumb. I bought Orion. If you don’t know who the heck Orion is, then that’s probably about right. But I know who he is, and that’s what really counts here. (If you really want to know: Orion is one of the New Gods, a group of characters created in the 70s by comics great Jack Kirby, after he left Marvel to work at DC. Orion is the son of the generally more known Darkseid.) So, let’s see how this guy turned out!

THE FIGURE ITSELF

Orion52bOrion is part of DC Collectibles’ expansive (and apparently soon to end) DC Comics – The New 52 line. He was released in August of 2014. According to the back of the box, his fellow figures are Super Girl and Batgirl, but I think Orion was sort of meant to be a solo release. The figure is just shy of 7 inches tall and he has 20 points of articulation (plus a flip up visor!). Articulation hasn’t been one of DCC’s strong suits in the past, but it’s actually pretty good here. The only key joints I’d say are missing would be some sort of hinge joint at the hips (a la DCUC) and some ankle joints, but the figure is serviceable without them. Orion is, as one would expect, based upon his appearance in DC’s New 52 line of comics. More specifically, he’s based on Cliff Chiang’s work with the character in Wonder Woman, which is where the majority of his New 52 appearances have occurred. His design has been changed a fair bit from his classic look. Admittedly, aside from the helmet, Orion’s classic look was a teeny bit on the bland side, so a re-design isn’t a terrible thing. The more conventional spandex and underwear on the outside look has been replaced with a look that has bit of a pulpy space biker look to it. It’s, and I can’t believe I’m saying this about a New 52 design, a pretty solid look. It isn’t needlessly detailed; there aren’t any odd bits and bobs sticking off of him; he doesn’t have lots of random etchings everywhere; it just looks good. The figure’s sculpt does a very nice job of translating this design into three dimensions. The proportions are all pretty good, and the whole sculpt is incredibly detailed. The rough texturing of the jacket and boots up against the smoother texture on the pants adds a great bit of dimension and realism to the figure, and they’ve managed to actually make the helmet look pretty good, which has always been a n issue with Orion figures in the past. The flip up visor is a little on the bulky side, but not too bad. I definitely like him more with the visor down, but the underlying face is a well done interpretation of Orion’s angry visage. Orion’s paint work is pretty good, but not great. It’s certainly not bad, but a few of the lines on his coat are out of place, and there’s a strip of up-painted plastic along the top of the left side of his collar. Also, the figure’s skin is really pale, especially when compared to the prototype pictures. On the plus side, the differing sheens on the various parts of the costume are a really cool touch, and do show that DCC is putting some thought into the figures. Orion includes his trusty Astro-Harness. It’s a bit awkwardly designed, and he kind of has to ride it like a Segway, which is a bit goofy looking. In addition, it can be a bit difficult to get the handles in and out of the hands. I actually broke one if the handles off the harness trying to remove it, so be careful. It’s a key piece for the character, so I’m glad it’s included.

THE ME HALF OF THE EQUATION

So, why did I get this New 52 figure months after it was released? It’s my comicbook store’s fault. I had a coupon for 40% off of one item in the store, and I used it on this guy. I’ve actually been contemplating getting this figure since before it was released. I’ve always liked Orion, and even though I haven’t read his recent appearances, I thought this was a pretty cool design. 40% off was enough to get me to cave. I’m glad I got him. He’s a very nice figure. And now he’s making me reconsider some of the other New 52 figures. Crap…

Orion52c

#0506: Han Solo – Bespin

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HAN SOLO – BESPIN

POWER OF THE FORCE II

HanBespin1

Hey! Do you like reading about Han Solo figures? I sure hope you do, cuz I’m reviewing another one today. Yes, after the barrel of laughs I had writing yesterday’s review, I thought, why not another one? So, I’ll be wrapping up this little subset of Power of the Force II reviews with another Han Solo. Yay!

THE FIGURE ITSELF

HanBespin2This particular Han found himself released in the second year of Kenner’s Power of the Force II line. After doing the primary looks of most of the main characters from A New Hope (as well as one or two figures from the other two movies), the second year turned to the later looks of the primary characters, just to make sure the line didn’t run out of Hans and Lukes. So, Han is based on his primary look from Empire Strikes Back, commonly referred to as his Bespin look, as it’s what he’s wearing during all of those scenes. It’s definitely a fan-favorite look, and I’d say its popularity rivals the ANH look. The figure is about 3 ¾ inches tall and he has 6 points of articulation. The figure’s sculpt is mostly new, with the exception of the head, which is re-used from the previous Han figure. That was definitely the best sculpted piece on the last figure, but it’s still saddled with its own set of issues, chief among them being it just doesn’t really look like Han Solo. That said, it’s on an entirely new body here, and that does the sculpt a few favors, chief amongst them being that the head is just a heck of a lot more proportional with the new body. Kenner kind of caught on to some of the complaints about the first assortment of POTF II figures’ proportions, so later assortments ended up at least a tad less ridiculous. Han is still a little bulky, but it’s more evenly spread this time. He lacks the laughable hour glass figure of the previous Han, and his arms don’t look like they’re about to bust the seams of his sleeves either. Those are both pretty big improvements. The figure’s clothes also have a fair bit more texture this time around, especially the shirt and coat, which helps make the figure at least a little more interesting looking. Sadly, he still has some oddly posed legs, but at least they look more like a deep step this time than the freaking side lunge that smuggler Han was doing. The paintwork on Han is overall pretty clean and well handled, and it seems to be better that the other Han. However, there’s a paint chip on his neck, which is rather annoying. Also, the most glaring issue with that paint is that they flat out got the color of his coat wrong. In the movie it’s very definitely blue. Here, it’s black for some reason. I wonder why that happened. Han includes his trademark (and still way oversized) blaster pistol, as a large gun, which I am once again pretty certain he never actually carries in the movies.

THE ME HALF OF THE EQUATION

Okay, so while I didn’t actually have this figure growing up, I did get to play with one on a fairly regular basis. See, my grandmother wanted my cousin Patrick and me to have some figures to play with when we stayed with her, so she had me pick out a handful of POTF II figures for the two of us. This version of Han was among them. Patrick and I had dug out a small little dirt pit in the back yard, which we used as a stand in for the Sarlac Pit, and one day, it started raining and we had to run back in. We thought we had grabbed all of the figures, but poor Han got left behind. The next time we were both at the house, our grandfather had filled in the pit. Patrick and I dug for a while, but Han was nowhere to be found. It’s always been that figure that got away. While at Farpoint this year, still high from the excitement of getting the other POTF II figures from the charity sale, I found this Han at one of the dealer’s tables. His package had yellowed so much that it looked like the poor guy had been encased in amber, but the figure was just fine. And now I have that Han figure again. Huzzah!

#0505: Han Solo

Posted by Ethan Wilson in Reviews and tagged with , , , ,

HAN SOLO

POWER OF THE FORCE II

HanANH1

I’m desperately trying to come up with a good intro here, and literally the only thing going through my head is “Han Solo Cup.” Of which I feel rather ashamed. Yesterday, I remarked that I never had any of the Power of the Force II Stormtroopers. Well, funny thing about that is, on the flip side, the only Han Solo I owned from the line was Stormtrooper disguise Han. And, in what seems to be the story of my adult collecting life in general, I’ve decided to fix that. So, let’s look at a Han Solo figure!

THE FIGURE ITSELF

HanANH2Han was released in the first assortment of POTF II figures, which shouldn’t really surprise anyone. He was Han freaking Solo after all. He’s roughly 3 ¾ inches in height, and he has the line’s standard 6 points of articulation. He’s based on Han’s primary look from A New Hope, which is generally the look most people associate with the character. Han’s sculpt was original to him, and it exhibits a lot of the same style cues present in other POTF II figures. Let’s start off with the basic proportions of the figure: he has an overall body-builder-esque physique, but even by body-builder standards, he’s a bit absurd. His shoulders are really broad, and his arms are practically bursting out of his sleeves. He also has the huge hands and impossibly thin waist that were prevalent in the line. Han, more so than others in the line, feels like a cartoon caricature, not a human being. On top of the proportions, Han’s sculpt is plagued by a few issues. Like a lot of the others in this line, Han’s legs are somewhat strangely posed, requiring that he stand in a deep stance to be even remotely balanced while standing. Also, though his hands may be large, they haven’t been sculpted to really hold anything. This is the worst on his right hand, you know, the one he holds his blaster with, which is sculpted flat, so he can’t actually do so. Finally, there’s the head. Now, to be fair, the head is easily the best part of this figure, especially from a technical standpoint. There’s some really nice detail and texturing. However, it seems like the sculptor was working from pictures of Harrison Ford at the time these figures were made, instead of at the time of the movies. And even then, it’s hard to see a lot of Ford in this sculpt. He looks a bit like the lovechild of Ford and Tommy Lee Jones, which, needless to say, isn’t Han Solo. Han’s paintwork is pretty much typical for the time. It’s certainly not bad, but it’s not anything amazing either. Everything is pretty much where it’s supposed to be, and there aren’t really any issues with bleed over or slop.  Han included his signature blaster pistol, which is hysterically oversized, and a larger blaster rifle, which doesn’t appear to be one he carries in the film.

THE ME HALF OF THE EQUATION

As I mentioned in the intro, this isn’t the Han I had growing up. I think part of what turned me off to Han figures in general was that likeness he had. I just didn’t like that Han looked so much older than he should. But, over time, the old Han figure has started to grow on me. So, Han ended up being one of the POTF II figures that I fished out of the charity sale box at this year’s Farpoint. Like the Stormtrooper, he’s definitely a goofy figure, but I feel a twinge of nostalgia for this guy.

#0504: Stormtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , ,

STORMTROOPER

POWER OF THE FORCE II

StormtrooperPOTF2a

When I was younger, I had my fair share of figures from Kenner’s Power of the Force II line. Seeing as it was the only Star Wars line around when I was younger, it was these guys or nothing. So, these guys it was. For whatever reason, however, I never found myself with a basic Stormtrooper figure. In fact, until recently, the only Stormtroopers I had were the vintage ones my Dad gave me. But, now I’m looking to change that (I guess), so here’s a Stormtrooper from POTF II!

THE FIGURE ITSELF

StormtrooperPOTF2bThe Stormtrooper was released in the first 1995 assortment of Power of the Force II figures. He stands roughly 3 ¾ inches tall and he has 6 whole points of articulation. This is usually the point of the review where I’d say that I don’t know which of the three Stormtrooper designs was used for the figure, but in actuality, it’s fairly clear that this figure is an amalgam of those three designs (and Arnold Schwarzenegger). The entirely of the POTF II line was stricken by some serious steroid use, but the Stormtrooper seems to have been hit the hardest. The most apparent problem with this figure’s sculpt is the fact that he clearly has no neck. Previous troopers didn’t actually show the neck, but they at least made the helmet long enough that you could actually believe there might be one under there. Not the case here. This guy’s just got a head and then some shoulders, with nothing in between. The head sits atop a huge barrel chest that goes into a serious hour glass at the waist, which is certainly an impressive feat, I’ll give him that. The figure then has the requisite arms and legs with a 45 degree bend, just so he can look a little extra awkward. The legs in particular are bad, because they make him rather difficult to keep standing. On top of the oddly proportioned body, the armor is forced to either cooperate with these new found proportions or go home. It’s chosen the former, which means that the details are kind of a rough estimate of what they were in the movies. The figure’s paint is the simplest of the simple, with only a few spots or black here and there, to break up all of that white. The paint is rather sloppily applied; I guess it just follows that rough estimate thing that the sculpt was doing. The Stormtrooper includes his standard blaster rifle, which he can only hold in one hand, and a larger rifle, which he can also only hold in one hand.

THE ME HALF OF THE EQUATION

Just like yesterday’s Obi-Wan, the Stormtrooper was fished out of a rather large box of Star Wars figures being sold to benefit the Farpoint charities. I must admit to being rather excited when I pulled this guy out. Sure, he’s goofy as hell, but he really resonates with me, for some odd reason. I mean, how could my collection possibly be complete without a muscle-bound Stormtrooper?

#0503: Obi-Wan Kenobi

Posted by Ethan Wilson in Reviews and tagged with , , , ,

OBI-WAN KENOBI

POWER OF THE FORCE II

ObiWanPOTF1

Power of the Force II is really important to me. The line is certainly rather dated by today’s standards, probably even more so than even the vintage line, but it brought the Star Wars brand back to shelves after almost 10 years of absence. And, more importantly, it was the line on the shelves in the mid-1990s, just as a certain toy reviewer was getting into action figures. So, today, let’s have a look at that line’s take on Obi-Wan Kenobi, from back in the days when he’d only been played by one actor!

THE FIGURE ITSELF

ObiWanPOTF2Obi-Wan was released in the first assortment of Power of the Force II figures, which started showing up in 1995-1996. The figure is about 3 ¾ inches in height and he had 6 points of articulation. Oh boy, that waist articulation! Obi-Wan is based on the character’s appearance in A New Hope. Like the rest of the POTF II line, Obi-Wan’s proportions are a little bit whacked. He doesn’t quite have the body builder’s physique that some of the others did, but he’s got some fairly broad shoulders, and man, just look at the size of those hands! Also, his legs have a pretty odd leg posing, which kind of makes him have to stand with a strange stance. For some reason, his outer robes have been done using a removable add-on. The end result is that the figure ends up quite a bit bulkier than he should be. Since the sleeves are still brown to match the outer robe, I honestly can’t think of the practical use for a removable piece. Admittedly, the head is actually a decent sculpt. It has a passing resemblance to Alec Guinness, if perhaps a little squashed. Obi-Wan’s paintwork is decent. Not great, but certainly not bad. There’s a little bit of bleed over in a few of the transition areas. Also, it’s true to the film, but the figure is rather dull, color-wise. You know what makes people want a figure of an old guy? Dull colors. Obi-Wan includes one accessory: his lightsaber. The lightsaber is absurdly long (taller than Obi-Wan), which kinda makes you wonder if old Ben is compensating for something.

THE ME HALF OF THE EQUATION

This marks the second of this figure that I have owned. I got my original around the same time as all the others I have from this line, which is when they were first released. I ended up trading that figure for a Val Kilmer Batman variant (what can I say, I was young and foolish!).  I’ve gone all these years without picking up another one. While I was at Farpoint this year, I fished Obi-Wan, along with a few other POTF II figures out of a box of various Star Wars figures that were being sold to benefit the two Farpoint charities. So, I not only got to replace my original figure, but I also got to feel sorta good about it. That’s pretty cool, I guess.

#0502: Vision & Quicksilver

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

VISION – MARVEL NOW & QUICKSILVER

MARVEL MINIMATES

Vision&Quicksilver1

Obviously, yesterday’s Marvel Minimates review wouldn’t be complete unless it were to be followed by another Marvel Minimates review, right? That’s just plain old sound logic right there. Obviously. So, how’s about we take a look at two pretty important Avengers who are undoubtedly certain to be thrown into super-stardom by this summer’s Avengers: Age of Ultron, Vision and Quicksilver!

THE FIGURES THEMSELVES

This pair of figures makes up another of the four two-packs released as the 19th series of Toys R Us exclusive Marvel Minimates. Unlike yesterday’s set, which augmented a boxed set, these two are just kind of stand-alones for this series. In fact, they don’t even represent the characters from the same period of time in the comics, so they aren’t even related to each other.

VISION – MARVEL NOW

Vision&Quicksilver2Vision is the next in a decently-sized of characters getting the requisite figures of their looks from the Marvel Now! re-branding. This marks the third figure named Vision in the line, but it’s really only the second figure of the “original” Vision (Vision 2.0 being a related, but separate character). While the last Vision represented the character’s classic look, this one is, as the name indicates, based on the look he received as a result of Marvel Now! For my money, it doesn’t quite live up to the classic design, but it’s not a bad look purely on its own. Vision is about 2 ½ inches tall and has 14 points of articulation. He’s built on the standard Minimate body, with an add-on for his cape. The cape is a re-use from DC Minimates Series 1 Superman. It’s a pretty straightforward normal cape piece, so it’s a fair choice. Other than that, the figure is just a vanilla ‘mate, which is pretty much to be expected for Vision. Vision’s paint is pretty spot on. The base colors are clean, and all the line work is nice and sharp. The colors could possibly stand to be a bit bolder, especially the greens, but they aren’t bad. Also, I would much prefer yellow to the gold on the figure, but that’s more of a personal preference. Vision includes a spare set of arms and legs which are translucent (to simulate his phasing abilities) and a clear display stand. The lack of a flight stand is a little annoying, but the extra limbs are pretty cool.

QUICKSILVER

Vision&Quicksilver3This marks Quicksilver’s second Minimate. He’s actually the same basic design as the last one, so this one’s more of an update than anything else. Both are based upon the character’s second, blue and white costume, which is the one he’s worn for the majority of his career, so it’s a pretty classic design. The figure is about 2 ½ inches in height and he has 14 points of articulation. He uses the standard Minimate body, with an add-on piece for the hair. The hair is re-used from one of the Wolverine Origins Wolverines. It’s something of a questionable choice. It’s not terrible, but it’s not a particularly close match. It would be nice if he’d gotten his own piece, but I guess this one works in a pinch. Quicksilver’s paint work is overall, pretty decent. The colors are nice and bold, and the detail lines are sharply applied. I do like that he has the proper black shorts that he tended to have in most depictions of the costume. Those were absent from the last Quicksilver, so it’s nice to see them here. Perhaps the only real issue with the figure’s paint is his face. Admittedly, the face is much better in person than it looks in pictures, but something about the mouth just seems really off. Maybe if he lost the dimples, it would look better. Quicksilver includes a dust cloud piece for running and a clear display stand.

THE ME HALF OF THE EQUATION

Like the last set, I got these from my local TRU (shout out to Minimate Multiverse member Ms. Marvel Fan, who helped make sure I got the set). This set isn’t perfect, but I really like it. Vision is one of my favorite Avengers, so getting a new version of him is pretty awesome. And Quicksilver offers a nice update to the original, which is a welcome addition.

Vision&Quicksilver4

#0501: Iron Man – Space Armor & Ronan the Accuser

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

IRON MAN – SPACE ARMOR & RONAN THE ACCUSER

MARVEL MINIMATES

IM&Ronan1

You know what I’ve missed reviewing? Marvel Minimates. Sure, I’ve reviewed a fair amount of figures from other Minimate lines, and a fair number of other Marvel figures as well, but it’s just not the same! As luck would have it, the latest set of TRU exclusive Marvel Minimates just started hitting stores, so new Marvel Minimates to review! First up, it’s two space-faring ‘mates, Space Armor Iron Man & Ronan the Accuser!

THE FIGURES THEMSELVES

These two comprise one of the four two-packs that make up the 19th Toys R Us exclusive series of Marvel Minimates. These two figures in particular were originally designed for the TRU exclusive Infinity tie-in set, but they weren’t amongst the four chosen for the actual set. It’s nice to see them turn up here.

IRON MAN – SPACE SUIT

IM&Ronan2Like Captain America before him, Iron Man has had quite a few Minimates in the past, but he had yet to join the ranks of the space worthy heroes. Now he’s an official member of the club, with a card and everything. Okay, there’s no card. Or club. It’s more of an “in my mind” sort of thing. Anyway, Iron Man was the other “heavy hitter” from the Infinity poll, so it’s no surprise to see that DST found a spot for him. The figure is roughly 2 ½ inches in height and he has 12 points of articulation. Tony’s had a few space armors over the years, but this ‘mate is based on the most recent one, which has made prominent appearances in the recent Guardians of the Galaxy comics, as well as being Tony’s main look in Infinity. Iron Man is built on the standard Minimate body, with non-standard pieces for the upper arms, hands, and feet, as well as add-ons for the helmet and torso armor. The figure features a fair bit of re-use from previous Iron Men. The upper arms come from the Series 35 Mark V, the hands are from Series 49’s Mark 42, and the feet are from Series 45’s Mark VII. The helmet and chest piece are both new to this figure, and both seem to be pretty great adaptations of the comic design. The re-use pieces are also pretty decent matches to the source material, which is always cool. It’s really awesome to see DST put their tremendous bank of prior IM pieces to good use. Iron Man’s paint is overall pretty good. The base colors are a little sloppy in some places, and it would be nice if the red and gold were just a little bit more distinguished. The biggest issue is one that isn’t apparent when the figure is all armored up. The underlying Stark face is set rather high on the head, resulting in a rather chubby looking Tony, and worst off all, the red paint from the helmet has bled onto the face, resulting in permanent red marks. Fortunately, these issues are hidden by the helmet, and the rest of the figure’s paint, particularly the detail work, looks nice and sharp. Iron Man includes a spare hair piece (re-used from the Series 51 Nova), a blast off base cast in yellow, and a clear display stand.

RONAN THE ACCUSER

IM&Ronan3Now we get to the real star of the set, Ronan the Accuser! This marks Ronan’s second venture into the world of Minimates, but it’s the first comic version of the character. As cool as the movie version was, it’s hard to beat the classic Ronan design. Ronan stands about 2 ½ inches tall, and has 14 points of articulation, although his head is a bit restricted by the hood. Ronan is based on his original comics design, which is the one he’s pretty much stuck with since his creation. It’s a solid piece of design work, and really holds that classic Marvel feel. The figure is built on the standard Minimate body, with add-ons for the hood/shoulder pads, belt/skirt, and glove and boot cuffs. The glove and boot cuffs are re-used from numerous classic Iron Man ‘mates. They’re pretty straightforward pieces, and they are pretty much perfect for Ronan’s look. The hood/shoulder pads and the belt/skirt are both new to this figure. Both pieces are very nicely sculpted and are pretty much spot-on for the character. The impediment of the neck movement by the hood is a little annoying, but I’m not sure how else it could be handled. Ronan features some pretty great paint work. The various greens are all very nicely chosen and all pop in their own way. The detail lines are fantastically handled, and the face in particular is perfect for Ronan. Ronan includes his signature hammer (and the head is right side up this time) and a clear display stand.

THE ME HALF OF THE EQUATION

I acquired these two from my local TRU, with the assistance of fellow Minimate Multiverse member Ms. Marvel Fan, who was super helpful in making sure I got a set. I’ve been anxiously awaiting this set’s release ever since I picked up the Infinity set, so I’m really happy to finally have them. Iron Man is a little “meh” but he’s not terrible. Ronan, on the other hand, is easily one of my favorite ‘mates in quite some time. He’s just so well done!

IM&Ronan4