Category Archives: Reviews

#2427: Trevor Fitzroy

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

TREVOR FITZROY

X-MEN (TOY BIZ)

“An evil criminal from the future, Trevor Fitzroy used his power to create portals through time to elude the authorities of his native era by escaping into the past. Now trapped in our century, he uses his mutant abilities and futuristic battlesuit to fulfill his every lethal wish – and to attempt the destruction of his arch-enemy Bishop!”

You didn’t think I was just going to walk away from 5-inch X-Men, did you?  Okay, actually, that would be pretty sensible.  I reviewed 19 of them all in one day, just over a week ago, and that’s like a 30% increase in the number of them reviewed for the site as a whole in the 6 1/2 years I’ve been running it.  I think I technically met my yearly quota already.  Well, in actuality, all the Day of the Wolverines really did was reignite my desire to review these guys, although perhaps not in quite as crazy a fashion.  So, I’m picking up where I left off and diving into the world of ’90s X-Men with a character that exists purely within that world and pretty much nowhere else, Trevor Fitzroy!

THE FIGURE ITSELF

Trevor Fitzroy was released in Series 6 of Toy Biz’s X-Men line, and was quite renowned for being a notorious peg warmer for the assortment.  Even at peak ’90s, nobody really wanted this guy.  Poor Trevor.  Despite general lack of interest in the character, there were two variants of Fiztroy produced, one as part of an FAO Schwarz-exclusive four pack (which traded out his blue for purple), and the other in a KB Toys-exclusive two-pack with the previously-reviewed Maverick, which is actually featured in the picture at the bottom of this review.  Whichever version of Fitzroy you get, the figure stands 5 inches tall and he has 9 points of articulation.  His sculpt was unique to him, and it’s honestly not a bad one.  He definitely reflects the trend of these figures bulking up as the line progressed, but this one looked okay.  He’s exaggerated, but not too insanely so.  The head’s got a decent bit of character to it, as well, and they were finally starting to really get a grip on translating some of those radical ’90s hair styles into plastic by this point.  His paintwork is decent enough; nothing amazing or anything to write home about, but it gets the basics down.  The standard release had a yellow stripe down the middle, while the two-pack version swaps it out for gold.  In general, the two pack version isn’t quite as nicely painted, I found.  Fitzroy is packed with some clip-op armor which, if I’m being totally honest here, was more than a little disappointing.  It pretty much won’t say on the figure at all.

THE ME HALF OF THE EQUATION

I didn’t have a Fitzroy growing up, but boy do I recall seeing Fitzroy…everywhere.  He was just all over the place.  That’s probably why I never bothered to get one, honestly.  Well, that, and his two episodes of X-Men: The Animated Series not being terribly impressive.  After getting Maverick all by his lonesome a few years ago, I tracked down the standard Fitzroy loose, and then discovered that the two-pack one was different, at which point I lost my drive for completion because it meant buying another Fitzroy.  However, when All Time got in their mega Wolverine collection, this pack was in there (because of the small diecast Wolverine included), and it was honestly easier than going through the trouble of getting Fitzroy by himself.  Fitzroy is perhaps not the most thrilling figure, but he’s better than I expected him to be, so I can’t really knock him all that much.

#2426: Snowtrooper

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

SNOWTROOPER

STAR WARS: POWER OF THE FORCE II (KENNER)

“The ice planet Hoth was the site of the terrible conflict between Rebel and Imperial forces called the Battle of Hoth. Though the alliance resisted the Imperial assault for a short period, they were eventually forced to abandon the Echo Base headquarters as it became overrun with fearsome snowtroopers, the Empire’s elite frozen-weather corps.”

Since its very first entry, the Star Wars universe has dabbled in environment-specific variants of its various troopers.  When Empire Strikes Back brought our heroes and villains to the icy planet of Hoth, it brought with it a whole set of cold-weather gear variants.  That included today’s figure, the Snowtrooper!

THE FIGURE ITSELF

The Snowtrooper was added to the Power of the Force line in 1997.  This was the Snowtrooper’s second time as an action figure, following his original vintage release.  The figure stands 4 inches tall and he has 5 points of articulation.  The Snowtrooper is a far more restricted figure than others in the line in terms of articulation.  The nature of the design means that he doesn’t have a neck joint, and the skirt piece means that the hip joints have reduced mobility as well.  The sculpt itself is a reasonable effort.  By this point, pre-posing and wonky proportions were mostly worked out of the line, and the Snowtrooper is reflective of that.  That said, the actual detailing on the sculpt is a little more on the soft side, so a lot of the details get a little lost.  The line was a bit up and down with the sharpness, so it’s too bad that the Snowtrooper falls more into the down, especially given the quality of the vintage sculpt.  The paintwork on the Snowtrooper is actually more complex than you might expect at first glance, with a good deal of weathering mixed in, in order to prevent it from just being an all-white design with nothing to break it up.  It honestly looks pretty good.  The Snowtrooper included a standard Stormtrooper blaster rifle and his supply pack, making for a pretty nice, fairly film-accurate package.

THE ME HALF OF THE EQUATION

The Snowtrooper was added to my collection during one of my PotF buying sprees, in the fall of 2018.  He was actually added to my collection by Max, so it’s technically his fault, I suppose.  The Snowtrooper isn’t one of the line’s most technically impressive figures by any means, but he’s respectable enough in his own right, I suppose.

#2425: Leonardo

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LEONARDO

TEENAGE MUTANT NINJA TURTLES: TURTLES IN TIME (NECA)

What?  No Legends review today?  But I’ve only reviewed half of the set!  How can this be?  Well, I got a lot of Legends in the last two weeks, so I’m going to be trying something a little different in terms of how I drop the reviews, so that I don’t get too Legends-ed out.  So, let’s jump over to something a little bit different: Ninja Turtles!  They’re hardly one of my primary interests, but the Turtles have been showing up with a decent amount of frequency on this site in the last year.  Back in March, I took a look at the Foot Soldier from NECA’s recently launched Turtles in Time line.  Now I’m following that up with a look at the Turtles’ leader, Leonardo!

THE FIGURE ITSELF

Like the Foot Soldier before him, Leonardo is part of the first series of NECA’s Turtles in Time line, which is somewhat of a follow-up to their arcade-based boxed sets from 2016.  Unlike those, however, these guys are available at mass retail.  The figure stands 5 1/2 inches tall and he has 29 points of articulation.  All of the figures in the first assortment barring Slash make use of the sculpts from the 2016 set, which, in the case of Leo, means he also shares his mold with all three of the cartoon-styled Leos released in the last three years as well.  It’s a nice, clean sculpt, which captures the design from the cartoon quite nicely.  It also does a pretty respectable job of working in the articulation, although in the case of this particular figure, I did have some troubles with stuck joints that took a little bit of working with.  Leo’s paintwork is much like the Foot’s, going with a slightly stylized approach to the game’s 16-bit graphics.  It’s a little more pronounced here than it was on the Foot, and is in fact an exact match for the boxed set release this time around.  It still looks pretty cool, and works in its own way.  Leo is packed with two sets of hands (gripping and gesturing), his twin swords (which are actually distinct sculpts from the one included with the Foot Soldier), and a hoverboard with a flight stand.  The board is again the coolest extra here, and I really dig the color coordination with Leo’s mask going on there.

THE ME HALF OF THE EQUATION

The Foot Soldier was really the only of the figures from the first assortment that I truly felt like I needed to own, since I’m starting to hit my limit on how many versions of the Turtles I can have in my collection.  If I’m going to break that rule, it’s also probably not going to be for Leo, what with him being my least favorite and all.  Why am I reviewing this guy, then?  Poor packaging design, that’s why.  While moving the figures from one location to another on the store floor at All Time, Leo’s hook broke off (that’s why you shouldn’t really make them out of cardboard), so since he was going to need to be opened anyway, Jason passed him along to me for a quick review.  He’s not a bad figure, and it’s nice to get a taste of the cartoon Turtles molds.  If you’re a Leo fan and just want a solid version of his ’80s look, you could do a lot worse than this one.

As mentioned above, I was given this guy to review by my friends at All Time Toys.  If you’d like one of your own, he’s still available via their webstore here.   Or, if you’re looking for other toys both old and new, please check out their website and their eBay storefront.

#2424: Taskmaster

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

TASKMASTER

MARVEL LEGENDS (HASBRO)

“Taskmaster is armed with the ability to mimic an enemy’s every move.”

As the MCU has evolved, so have the foes that its heroes face.  While Phase 1 is generally regarded as having well-crafted villains on the whole (we’ll overlook Whiplash), Phase 2 is generally agreed to have had some pretty lackluster ones.  Phase 3 again introduced some slightly more interesting ones, and the post Phase 3-slate will hopefully keep the trend going.  They’ve certainly grabbed a solid starting point for their first film out of the gate, going with classic Avengers foe Taskmaster as an opponent for Black Widow in her solo film.  It’s a solid match-up, and if nothing else it looks like it’s going to lead to some pretty fun fight scenes.

THE FIGURE ITSELF

Taskmaster is the one figure in the Crimson Dynamo Series of Marvel Legends not to get a number, due to being the one figure in the set to not include a piece of Dynamo.  He’s also the double-pack for this assortment, which might seem a little odd given it’s Widow’s movie and all, but she’s got the two separate figure releases, so it ultimately balances out.  Taskmaster has had a couple of somewhat divergent costume designs in the comics, and fans are a little split on which one is really the proper Taskmaster look.  For the film, it looks like they’ve somewhat split the difference, resulting in a design that’s actually a pretty solid hybrid of the character’s various looks.  The figure stands 6 1/4 inches tall and he has 35 points of articulation.   Taskmaster is sporting an all-new sculpt, based on his film design, and it’s a pretty impressive one at that.  There are a lot of layers in play here, making it look like it’s actually a bunch of armor assembled on a real person.  The detailing is all pretty sharply handled, and everything seems to line-up pretty closely to what we’ve seen of Taskmaster from the trailers.  The proportions are all nicely balanced, and Hasbro is again getting that articulation worked in as naturally as possible, all while trying to maintain that heightened poseablility we’ve gotten so used to.  The paintwork on Taskmaster is decent, if maybe not quite as impressive as it could be.  The base level stuff is all pretty good, but instead of a black bodysuit with blue armor plating, the bulk of the figure is just straight molded in a very dark blue.  It gets the same general effect, but it ends up not looking quite as sharp as the on-screen design.  Obviously, this is still a far cry from when the AoU figures lost most of their detailing on their backs, but it’s still not quite perfect.  Though Taskmaster is without a Build-A-Figure piece, he’s certainly not lacking in accessories.  He’s got three sets of hands (in fists, gripping, and panther claws), a bow, arrow, sword, and shield.  About the only thing I could really say he’s missing is an alternate head with the hood pulled down, but ultimately this is a pretty impressive assortment of extras.

THE ME HALF OF THE EQUATION

I’m definitely down for a good take on Taskmaster, and I’ve been pretty excited for this guy since he showed up in the concept art for the movie.  Hasbro definitely knows there’s a lot of interest in him, because they’ve definitely put there best foot forward on this release.  Dropping the BaF part in favor of more weaponry was definitely the right call, and it results in a figure that’s really the star of the movie figures in this line-up.

Taskmaster was purchased from my friends at All Time Toys.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2423: Red Guardian

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

RED GUARDIAN

MARVEL LEGENDS (HASBRO)

“Alexei Shostakov is a super soldier and spy who has lived a lifetime of triumph during the Cold War.”

Imitators of Captain America are no rare thing, in pretty much any incarnation of the Marvel universe.  In the span of the next year, we’ll have two of them introduced into the MCU.  The first is today’s subject, Alexei Shostakov, better known as the Red Guardian, the Soviet Union’s answer to Cap, and, at least in the comics, anyway, the ex-husband of Natasha Romanov.  I don’t think that’s quite going to be their relation in the movie, but only time will tell.  Whatever the case, Stranger Things alum David Harbour has been cast in the part for the film, presumably so that when you say “that comic book movie where David Harbour’s red,” nobody thinks of Hellboy anymore.

THE FIGURE ITSELF

Red Guardian is figure 3 in the Crimson Dynamo Series of Marvel Legends, and the second-to-last of the movie-based figures.  This is our second Red Guardian Legend, following the comics-based one from the Civil War tie-ins.  He’s theoretically based on the main design for the character from Black Widow, but…well, there’s a bit to that.  The figure stands 6 1/4 inches tall and he has 31 points of articulation.  In contrast to yesterday’s Yelena figure, which was too tall, this guy’s really not tall enough, given that David Harbour’s height of 6’3″ should actually make this figure roughly an inch taller than the two Widows, placing him more into Thor territory (since their actors are actually the same height, and all).  As it stands, he’s just about an average height, which does seem a little bit on the small side.  At the very least, his sculpt does seem to have the appropriate bulk to it, so there’s at least that.  What it doesn’t have, however, are two somewhat important things: Alexi’s somewhat disheveled appearance, and his uniform’s helmet.  In circumstances I can only assume are rather similar to what happened with the Infinity War Captain America, where Hasbro was working from early concept art for the character, rather than the final film’s appearance.  The end result is a figure that looks suitably like David Harbour in a Red Guardian costume, but doesn’t seem to be quite so accurate to the proper character as seen on screen.  Maybe there’s a flashback sequence where Alexei is a little more pulled together, but my money’s on that not being the case.  It’s honestly too bad, because it’s a good sculpt, and makes for a very playable figure.  The Harbour likeness is a strong one, too, and I like the general look of the design.  I will say that his paint work is probably the weakest out of this particular assortment, at least on my figure.  There are a few spots where it looks like the coverage wasn’t as consistent as it should be, and my figure is missing some noticeable paint for his beard at the bottom of his chin.  Red Guardian includes his shield and the left arm of Crimson Dynamo.  The lack of an extra head really stands out here, because he’s otherwise quite light compared to the rest of the assortment.

THE ME HALF OF THE EQUATION

I was pretty much prepped to be a little letdown by this figure.  It happened with IW Cap, and this feels pretty much the same.  The thing is, he’s honestly a good figure, and it’s a shame that a lot of people are probably going to miss that because he’s inaccurate.  I don’t know if Hasbro will be going back for a more proper version later down the line, but I can at least appreciate this guy for what he is until such a time that there may be a better one.

This guy was purchased from my friends at All Time Toys.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2422: Yelena Belova

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

YELENA BELOVA

MARVEL LEGENDS (HASBRO)

“A product of the Red Room’s ruthless training program, Yelena Belova is a fiery assassin.”

Though initially a name purely associated with Natasha Romanov, in 1999 it was revealed that “Black Widow” was actually a title used by Russia’s top assassin, who, following Natasha’s defection to the US, was Yelena Belova.  Yelena made her debut as an antagonist to Natasha, and has gone back and forth over the years.  For her MCU debut, she appears to be coming in on more friendly terms.  Of course, we won’t really know for sure until October now, so I guess we’ll just have to wait on that.  Well, might as well review the figure, I guess.

THE FIGURE ITSELF

Yelena Belova is figure 2 in the Crimson Dynamo Series of Marvel Legends, and the second of the MCU-based figures from the set.  It’s also our first Legends Yelena under Hasbro’s tenure, though we did get one previously waaaaay back in the Toy Biz days.  To say there have been advances since then is a bit of an understatement.  Yelena is sporting what appears to be her primary design from the film, an all-white suit similar to the one we’ve seen Natasha in, topped by a vest that looks suspiciously like the one Natasha had during Infinity War.  The figure stands 6 inches tall and has 27 points of articulation.  The height seems a bit much, because while Florence Pugh is taller than Scarlet Johannsen, it’s only by an inch, and given that this figure has flats, while Natasha is wearing heels, the height difference shouldn’t quite work out the way it does.  In terms of articulation, she tries out a slightly different articulation scheme, at least for the neck, which is a little more similar to how Black Series has been doing it recently.  I didn’t find the joint on mine to be quite as useful, however, and the neck ends up looking a bit longer than it should because of it.  Points for effort, though.  The sculpt on Yelena is a pretty solid one.  The likeness is respectably close to Pugh; perhaps a little thinner than in real life, but not by much.  The body sculpt is fairly realistically proportioned.  Interestingly, they’ve opted to sculpt the vest right onto the torso, instead of a removable one like on IW Widow, but I think the end result looks a little bit better.  Her paintwork is all pretty respectable.  She’s got the face printing, which looks better here than on Natasha.  The inclusion of the vest also helps break up her coloring a bit better than the all-white Natasha, making for a slightly more aesthetically pleasing figure to my eyes.  Yelena is packed with two sets of hands (fists and gripping), plus two more Markovs (though only one can be holstered this time; the other side has permanently sheathed knives instead), and the torso and shoulder pads to Crimson Dynamo.

THE ME HALF OF THE EQUATION

Classically, I’ve never had much attachment to Yelena as a character, so I didn’t really have much of an opinion about her introduction to the films (I was honestly fine with IW Widow serving as a nod and leaving it at that), but I did like the look of the figure.  In-hand, she’s quite nice, and a good match for Natasha.

Yelena was purchased from my friends at All Time Toys.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2421: Black Widow

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BLACK WIDOW

MARVEL LEGENDS (HASBRO)

“Natasha Romanoff reunites with a group of spies from her past to stop a lethal force.”

Hey, remember when I reviewed that one stray Black Widow figure last week?  Good, because if I’m honest, I only barely do.  It’s been like three weeks my time, so it’s but a distant memory.  Black Widow?  Now there’s a name I haven’t heard in quite some time.  Despite the film’s delay to October, all of the toys were set to arrive just before everything went nuts, meaning they’re all out there and ready to go for a movie that’s now six months out. Hey, who am I to knock new toys, though?  I’m kicking these reviews off with another figure of the title character herself, the Black Widow!

THE FIGURE ITSELF

Black Widow is figure 1 in the Crimson Dynamo Series of Marvel Legends, which is the dedicated Black Widow-tie-in assortment.  She’s the first of the four movie-based figures in the main line-up (there’s also the previously reviewed deluxe Widow, which is its own stand alone release).  The deluxe release gave us Natasha in her all-white number from a lot of the promotional material, while this one gives us her in her more standard color scheme.  I’m actually quite a fan of this particular design, as it’s really the closest that the MCU Widow has gotten to her classic ’70s costume from the comics.  The figure stands 5 3/4 inches tall and she has 27 points of articulation.  A lot of what’s here is shared with the deluxe release, as I assumed would be the case when I reviewed that figure.  It’s sensible, as it looks like the two designs are rather similar.  This figure gets a new upper torso piece, which changes out the webgear she’s sporting on her shoulders.  Now there’s a spot for her to stow her batons on her back, something I was happy to see after said feature was absent from her Infinity War release.  Beyond that, it’s the same sculpt I looked at before, which is fine by me, because it was a really good sculpt.  The paintwork on this release is overall an improvement on the deluxe’s.  The color scheme of the costume allows for more of the sculpted details to be properly accented, and is just generally a slightly more engaging design.  The only slight down turn is on the face, which doesn’t quite have the same lifelike quality to it that the deluxe release did.  I’m probably going to end up swapping those two heads for my display.  Though not packing quite the same impressive haul as the deluxe figure, this release of Widow still includes two sets of hands (fists and gripping), her dual Markovs, batons, and the left leg to the Crimson Dynamo Build-A-Figure.

THE ME HALF OF THE EQUATION

With things starting to head back into the beginnings of the path to normality, the floodgates have kind of opened up on toy distribution again, so I didn’t have quite as much of a wait for the full assortment of Widow figures as I’d thought I might.  Having quite liked the deluxe release, I was more invested in this one.  Though the face paint was a slight let-down, the figure is otherwise really solid, and definitely the best MCU Widow to date.  Even with the film pushed back, this figure is definitely worth getting a hold of.

Widow was purchased from my friends at All Time Toys.  If you’re looking for Marvel Legends, or other toys both old and new, please check out their website and their eBay storefront.

#2420: Daredevil & Bullseye

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

BATTLE DAMAGED DAREDEVIL, BULLSEYE, & UNMASKED DAREDEVIL

MARVEL MINIMATES

Though Daredevil and his supporting cast of players were removed and set out on their own for the purposes of Marvel Minimates very first assortment, when it came time to launch into their second year, old horn-head found himself once again grouped with the Spider-Man cast, accenting two straight Spidey-themed sets.  This time, he paired off with pretty much his last major foe not to be covered in the first series, Bullseye, and got two additional variants of himself, all of which I’ll be taking a look at today.

THE FIGURES THEMSELVES

Battle Damaged Daredevil and Bullseye were the final standard set in the specialty line-up for Series 4 of Marvel Minimates, with the variant DD swapping out for the standard in the one-per-case variant set.  As is the case with most of these earlier ‘mates, Battle Damaged DD and Bullseye were also available through the Target/Walmart packs, and were each available (albeit separately from each other) through Toys R Us’ larger boxed sets as well.  Unmasked Daredevil was only available in the Series 4 line-up, which is just really the best for everybody, I think.

BATTLE DAMAGED DD

Well, Spidey got in on this whole “Battle Damage” trend, so I guess DD wanted to be a part of it.  Given how much of beating Matt’s prone to taking on his usual exploits, it’s honestly not the worst choice for him.  The approach to creating this figure is much the same as the Spidey, starting with the standard version of the character and dropping some additional damaged details on top of it.  In that regard, this guy uses the same construction as the Series 1 release, with add-ons for his mask and belt.  As with that release, I feel these pieces still hold up, and they were definitely great at the time.  The paint’s where the changes occur.  Under it all, the very basic core details from the Red DD are all still there, but now there’s been a lot of scuffs and scratches added throughout, and a couple of exposed bits of skin are showing through.  Under his mask, we get a similar face to the other two DDs, but his expression has now changed, into something a bit more severe.  It’s a nice little change-up from the norm.  He may be a little battered, but Matt’s still rocking his two billy clubs, once again in all-red.

BULLSEYE

Bullseye was shown off a few times along the year one ‘mates, but didn’t quite make the cut, so we knew he was coming in some fashion.  This guy was also definitely a little swept up in the whole 2003 movie craze, but it’s not like Bullseye’s a really oddball character or anything like that.  His construction is pretty similar to his opponent, with add-ons for his mask and belt.  Both of these were new to Bullseye, and both would remain unique to him.  The mask was the first time we got visible eyes beneath a separate mask piece, and it handles them quite well.  The belt’s a pretty solid and pretty standard piece, so I’m a little surprised it wasn’t re-used, and honestly I might be wrong on that.  The paint on this guy is again pretty basic, but shows some of their trend towards higher levels of detailing.  When first shown, Bullseye was in a color scheme much closer to his modern comics appearance, but by time of release, the bulk of him is a much friendlier blue.  Not sure why the change, but it matches his classic appearances, so I guess that’s fine.  Bullseye is the master of turning anything into a weapon, so there are a lot of accessory options there, but this guy just goes for a single small knife.  Honestly, it’s not the end of the world, considering that the Legend didn’t even get that much.

UNMASKED DD

Man, did you think that Unmasked Spider-Man was a lazy excuse for a whole figure?  Well, feast your eyes on Unmasked Daredevil.  Literally, he’s the Series 1 Daredevil with Peter Parker’s hair/glasses.  You had to buy a second Bullseye in order to get a thing you stood a good chance of just doing on your own with parts you already had on hand.  What’s more, it’s not even all that great an unmasked figure, because, with the glasses and all, about the same amount of the face is visible.  Boy was this a weak, weak variant.  In a world where people pointed to the sanctity of preserving the rarity of the variants, I point to this guy and say “how do you preserve that?”, considering that an unmasked option literally became a standard for DDs after this.  I’m not a fan of this guy.

THE ME HALF OF THE EQUATION

I had Damaged DD and Bullseye when they were new, but over the years lost most of their pieces.  I recall liking them well enough at the time, and I can confirm I still think they’re pretty worthwhile.  Damaged DD in particular is a unique offering and does actually try to do something new and interesting.  Unmasked DD I didn’t have when he was new, in part because I wasn’t getting the variants, but also because even when they were still new, I felt he was a waste of space.  And now I have one and I still kinda feel like he’s a waste of space.  But I own him, so I guess he won in the end, now didn’t he?

All three of these specific ‘mates are new to me, and were purchased from my friends at All Time Toys.  They’ve still got a lot of that Minimate collection, and other cool toys both old and new, so please check out their website and their eBay Store.

#2419: AT-AT Driver

Posted by Ethan Wilson in Reviews and tagged with , , , , , ,

AT-AT DRIVER

STAR WARS: POWER OF THE FORCE II (KENNER)

“Drivers of the dreaded AT-AT walkers, specially trained “ground pilots”, played a vital role during the Empire’s assault on Hoth.”

Didn’t I *just* review an AT-AT Driver?  Oh, wait, that review ran like a month ago, didn’t it?  Well, in my defense, it’s only been like a week and a half from my time, so, there’s that.  Well, with it being the 40th Anniversary of Empire and all, I guess there’s no better time to double down on AT-AT Driver reviews, now is there?  Great, let’s look at another AT-AT driver then, shall we?

THE FIGURE ITSELF

This AT-AT Driver was actually the second to be released in the Power of the Force line.  The first was included with the AT-AT proper in 1997.  There was, however, only one of them included, despite there being two drivers per AT-AT, and it wasn’t exactly economical to get a second AT-AT just for the driver.  So, this guy got slotted for a standard release…in theory.  In practice, not so much, as the AT-AT Driver became one of the four PotF2 figures who didn’t make it to retail in 1998, and instead had to be offered exclusively through the Star Wars Collector’s Club, which made him a little tricky to get a hold of, until the excess stock was unloaded to Toys R Us, and they were suddenly available for a lot less than retail.  Quite a turbulent release path for a figure that’s not really much new.  Okay, that’s not quite true.  The figure was actually all-new, believe it or not, sharing no pieces with the pack-in figure from the AT-AT.  They had very similar sculpts, of course, but they were just different enough to be different.  The sculpt is pretty typical for this period of the line, being a fair bit bulkier than he should be, and a little lighter on the sculpted details than later figures would be.  All that said, it’s still a pretty nice sculpt, and not anywhere near as ridiculous as the basic Stormtrooper was.  In contrast to the pack-in, this guy has a little bit of pre-posing to him.  It’s rather minor, but there’s a slight shift in his step.  I kinda dig it; it makes him look a little more like a real person.  The paint work on this guy is pretty straight forward.  It’s rather on the basic side, although the head and the console on his chest both get a fair bit of smaller detail work that looks pretty sharp.  The AT-AT Driver included a blaster and a Freeze Frame slide.  Mine just has the blaster, I’m afraid.

THE ME HALF OF THE EQUATION

In my quest to complete my PotF collection, the Fan Club figures tend to be the ones I don’t run into quite as frequently, for obvious reasons.  I did end up getting this guy loose, however, which worked well enough for me. Obviously, he’s not as impressive as, say, the Black Series figure, but he’s got his own fun little flair to him, and I can definitely dig it.

I got this guy from my friends at All Time Toys.  They’ve got a decent back stock of Power of the Force, and other cool toys both old and new, so please check out their website and their eBay Store.

#2418: Wolverines (and friends)

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

WOLVERINE — MODERN AGE/BATTLE RAVAGED/POWER SLAMMER, LADY DEATHSTRIKE, & SABRETOOTH

X-MEN/MODERN AGE (TOY BIZ)

Alright, let’s wrap this bad boy up, bub! When I was divvying up the figures for these reviews, I was doing it by the year of release, and in the process, I actually erroneously listed one of today’s offerings as being from ’99, rather than ’97, as it should be.  With the ’97 review as crowded as it already was, I’m just going to give myself a slight break on that, and group it in here.  It fits better here anyway, since none of today’s figures are truly from the X-Men line proper.  It’s gonna get a little bit complicated, so I might as well jump right in, I suppose.

THE FIGURES THEMSELVES

“His past shrouded in mystery, the man known simply as Logan was once a Canadian secret agent.  As Wolverine, Logan is a deadly, living weapon.  Besides being a master of a myriad of both armed and unarmed combat, Wolverine’s senses are superhumanly acute and rival many animals, making him a superior tracker and hunter.  Wolverine’s skeleton is laced with an unbreakable metal known as adamantium.  Wolverine is also equipped with foot-long adamantium claws that retract into his hand and can slice through nearly anything.  Coupled with a mutant healing factor that automatically regenerates any damaged or destroyed cells in his body, Wolverine’s ferocity in combat makes him a virtually unstoppable opponent.” 

I’ve delved once before (and rather recently) into Toy Biz’s Modern Age line, which was a direct market line of figures dropped in ’99.  Obviously, Wolverine is a far less obscure entry than Captain Britain, and far less in need of yet another figure, but he was very likely the figure that actually got retailers to support such a venture in the first place.  In that regard, he’s actually a valid comics variant, being a new take on the Brown Costume, which hadn’t actually seen an update since the very first series of X-Men back in 1991.  An update was probably a good idea, though whether this update was an improvement is perhaps more up for debate.  The figure stands 4 1/2 inches tall and he has 11 points of articulation.  Structurally, there’s not anything new to this guy.  He’s the Ninja Wolverine with the forearms and lower legs of the Water Wars Wolverine.  It all meshes together well enough, I suppose, but it means the figure is as much a caricature of Wolverine as the Ninja figure was.  With the unmasked appearance, they’re clearly aiming to capture his appearance from the cover of his first solo series, but these parts are pretty far from that look stylistically.  I’m also just not a huge fan of this particular head.  He’s got some major underbite going on there.  Wolverine’s packed with a sword and dagger…and, well, I mean, I think they’re meant to tie into his being based on the miniseries, wherein Logan travels to Japan and makes use of such things.  Trouble is, they’re re-used from the Hercules and Xena lines respectively, so they don’t look even vaguely Japanese in origin.  On the plus side, this guy does bring the trading card back.  Nifty!

“Flying at each other with berserker rage and vengeance are Lady Deathstrike and Wolverine.  Each possessing claws infused with the super-strong metal adamantium, Wolverine and Lady Deathstrike are sworn archenemies.  Believing Wolverine to be the key to unlocking the secrets of her father’s research, Lady Deathstrike will stop at nothing until she has defeated the mutant X-Man.  With a rivalry sure to explode when they next meet, Wolverine and Lady Deathstrike are headed for trouble.”

We now enter into the realm that makes up the rest of this review: two-packs.  Toy Biz was rather fond of them, especially later in the 5-inch run, as they were a pretty quick and easy way to turn around some “new” product with a small, concise theme.  It was also a way to get slightly harder to find figures back out in a way that assured a sale of two figures instead of just one.  The “Greatest __” set-up was a popular one for the two-packs, and this particular set, made up of Wolverine and Lady Deathstrike, was dubbed “Greatest Archenemies,” and hit shelves in 1997 (yes, this is the offending item that broke my whole yearly break down).  I’m a little skeptical about Deathstrike being Logan’s greatest archenemy, but whatever.  The Wolverine included in this pack was a re-deco of the Invasion Series’ Battle-Ravaged Wolverine, which is honestly a pretty solid figure.  He stands 5 1/4 inches tall and he has 7 points of articulation.  Again, he’s quite tall for Wolverine.  And just kind of large in general, really.  This sculpt is one I’m fairly nostalgic about, the original release being my first Wolverine figure, and I do think it overall holds up pretty well.  The paint for this guy is rather drastically different, with it being a metallic paint scheme in contrast to the flat colors of the original.  This one also dials up the battle damage throughout, in contrast to the nature of the sculpt.  It’s not terrible, but I feel the coloring on the original is far superior to this release.  He was also given the weird armor from Patch, which isn’t a good fit for the body, or particularly great just as an accessory, but it sure is here.

Pairing off with this Wolverine was another go at Lady Deathstrike, previously seen in the Battle Brigade assortment.  She had two different decos there, but gets yet another here.  She stands 5 1/4 inches tall and has 7 points of articulation.  Her sculpt’s, uh, well, her sculpt’s not great.  I mean, I guess it’s not terrible, but it’s definitely not great.  I mean, all the important details are there, but the proportions are kinda wonky, and it’s really stiff.  It’s got those v-hips, and that’s pretty much never any fun for anyone.  For some reason, her forearms and hands are really soft and rubbery as well, and I’ve got no clue as to why.  Perhaps they were a safety hazard if cast in hard plastic?  She’s also got a radically changed color scheme, and I’m not really sure what it’s going for.  She’s pretty much only had the one color scheme in the comics, so this is an odd choice.  It’s also not very cleanly applied, and still feels kind of tacky in a number of places.  She gets the infrared headset and forearm cannon from the original Deathstrike release, but loses out on the big gross claw.  Also included in this set is a metal X-Men ring, if that’s the sort of thing you’re into.

In 2000, things began winding down for the 5-inch line.  To somewhat tie-in with the X-Men movie and the subsequent re-runs of the cartoon on Fox, Toy Biz put together a brief line of repaints and re-issues for the 5-inch figures.  There were three series of single-packed figures, and three different two-packs as well.  Wolverine and Sabretooth, whose rivalry was highlighted in the film, paired off for one of the sets.  The Wolverine figure in this set is essentially just a straight re-issue of the Wolverine included in the Power Slammers Series, one of the two Wolvies released in 1998 (a year I’ve pretty much skipped today). The figure stands just shy of 5 inches tall and he has 10 points of articulation.  While the Rogue and Gambit figures that accompanied this Wolverine figure in his original series were based on the Shi’ar attire they were wearing in the comics at the time, Wolverine had no such attire, so Toy Biz just sort of made up something to loosely match them, I suppose.  It’s not one of my favorite designs, and looks more like a snowboarding suit than something Wolverine would wear.  The sculpt is at least a relatively decent one, with a fair bit of detailing mixed in and a reasonable set of prioportions.  They even kept the pre-posing to a minimum.  It’s really just the costume design that’s whacky.  The original release came with a power slammer contraption, but this one instead gets the splitting door accessory from the Battle Ravaged Wolverine figure.

Packed in with Wolvie was a variant of Sabretooth.  Like Wolverine, the core figure is essentially the same as a prior figure, specifically the Sabretooth from 1997’s Ninja Series.  The figure stands 5 1/2 inches tall and he has 9 points of articulation.  His sculpt is suitably large and imposing, something prior Sabretooths hadn’t quite gotten down.  He’s also fairly well articulated, and generally looked as being the best general Sabretooth sculpt of the 5-inch days, despite being such a non-standard design.  He gets him some Wolverine hair (making it a little surprising that this figure was never repainted into Logan), and sort of a onesie.  It’s perhaps not as intimidating a look as his sheer size would tend to hint at, but then again, Sabretooth has never really had much of a sense of fashion.  This figure’s paint is largely unchanged from his single-pack, but he did get white boots in place of the original silver ones.  He gets the two pieces of clip-on armor from the Ninja release, but lacks that figure’s mask and tunic.

THE ME HALF OF THE EQUATION

Honestly, this last round of figures is pretty much all made up of figures that were on the chopping block when I was briefly considering *not* getting every figure I didn’t have from the collection at All Time.  I of course then came to my senses and realized how silly I was being not just filling in the set outright.  That said, this is definitely the weakest selection, with some kind of uninspired repaints, some really goofy toy-original designs that just don’t quite land, and a strangely not artist-specific take on an artist-specific concept.  Nothing here’s as terrible as, say Battle Blasters Wolverine, but none of its as fun as Unleashed or Missile Flyers.

Thanks to All Time Toys for setting me up with these guys to review.  If you’re looking for other cool toys both old and new, please check out their website and their eBay Store.