Category Archives: Reviews

#1748: Apocalypse

Posted by Ethan Wilson in Reviews and tagged with , , , ,

APOCALYPSE

X-MEN (TOY BIZ)

“Apocalypse is the evil mutant who has used his sinister genius and mutant ability to turn himself into a merciless one man army! Apocalypse is incredibly strong, able to change his size at will, and has created for himself a weapon system designed to destroy the X-Men. Apocalypse is the most frightening evil mutant on Earth when he turns himself into a giant, puts on this deadly arsenal and attacks!”

Following Magneto’s turn to the side of good in the ’80s, the X-Men spent quite a bit of time in search of a new over-arching big bad.  They found a number of potential offerings, none of whom quite hit that same spot, but perhaps the most successful of them was En Sabah Nur, aka Apocalypse.  He was a consistent foe in the back half of the ’80s, up into the ’90s, so his place early into Toy Biz’s run was certainly sensible.

THE FIGURE ITSELF

Apocalypse was one of the three villains released alongside our heroes in Series 1 of Toy Biz’s X-Men line.  He served as a rather sensible counterpart to the same series’ Archangel figure.  The figure stands 5 1/2 inches tall and he had 11 points of articulation (though two of those points can be somewhat debated, since they’re tied into his “action-feature”).  Apocalypse’s sculpt, like many others in this assortment, is definitely showing its age.  What’s interesting is that it’s due to slightly different factors than some of the others.  It’s not that he doesn’t quite live up to his comics appearance the way Archangel or Storm or Cyclops do, it’s actually that he’s too faithful to an Apocalypse design that itself has fallen out of fashion.  He depicts Apocalypse as he is seen in his earlier X-Factor appearances, when he was still rather lean, and still rather square and stiff.  It’s a very different take on the character, and his beefier revamp design from just a few years later would end up being the prevailing design and informing how the character was depicted for the three decades since his creation.  As such, this guy definitely looks out of place amongst the others, but paired with the Cyclops and Archangel from this assortment, he starts to fit in a bit better.  Ultimately, the actual sculpt is one of the more competent one from this first set.  I think I’d place him in the number three slot, after Nightcrawler and Magneto.  His proportions are certainly believable for this incarnation of the character, and his construction is quite sturdy.  Apocalypse’s paintwork is fairly standard stuff.  It’s rather limited, and the application is messy in some spots, especially the belt.   Apocalypse included a staff, which is supposed to have a “gem” at the top of it.  Mine’s gone missing, so my Apocalypse just looks like he’s holding a broken ball-point pen.  He also has an “Extending Body” feature, where his torso and legs extend outward, in sort of a stretching sort of fashion.  It’s rather goofy, and not really worth much extra, but it’s not like it impedes the figure overall.

THE ME HALF OF THE EQUATION

I’m not 100% sure how I got Apocalypse.  He was an earlier addition to the collection, I know that much, most likely gotten during my parents early efforts to expand my collection.  I was watching the cartoon by that point, so I knew the character.  Regardless of how I got the figure, he’s stuck with me for quite some time, despite my not being super into Apocalypse.  As I noted in the review, he’s a somewhat dated figure, based on an out-dated design, but he’s actually one of the stronger figures in the first assortment, and he depicts a version of the character we don’t often see.

Check out this review’s Flashback Friday Figure Addendum here!

#1747: Red Tornado

Posted by Ethan Wilson in Reviews and tagged with , ,

RED TORNADO

DC SUPERHEROES (IMAGINEXT)

Sometimes, it’s nice to remember when toys were just plain fun, and not necessarily aimed at pleasing only adult collectors.  One of the best lines out there for doing such things is Fisher Price’s Imaginext subset.  They’re definitely kid-oriented, but they’ve got some pretty amazing licenses, and the coverage of characters therein is nothing short of astounding.  They’re DC line in particular has made its way around to so many corners of the DCU, including more minor characters, such as today’s focus, the Red Tornado!

THE FIGURE ITSELF

Red Tornado was introduced into the DC Superheroes Imaginext line in 2018.  He’s sold as deluxe single figure, meaning it’s just him and a larger accessory, in a similar fashion to the previously reviewed Brainiac.  The figure stands 3 inches tall and has 8 points of articulation (as with all Imaginext offerings, his legs move as one).  Red Tornado has had a few distinct looks over the years; this figure goes for his more robotic, more stylized appearance from when he was working as Young Justice’s official Justice League-er sponsor.  It’s actually one of my favorite looks for the character, so I was pretty happy about this.  His sculpt is fairly standard stuff for this product spread, with highly stylized proportions and the like.  The blank portions of the sculpt are actually even more sensible with this particular figure than they were on other characters, given the robotic design.  Interestingly, the body gets a few more robotic details that aren’t traditionally seen on this particular design for the character, though I’m really not complaining about that.  Red Tornado’s cape is a combination of sculpted and cloth elements; the collar is plastic and the actual cape cloth, which is the best possible combo.  Tornado’s paintwork is fairly basic stuff, since he’s mostly just molded in the proper colors.  There’s some slop on his collar, but he’s otherwise pretty sharp, and he’s certainly bright and eye-catching.  The extra large accessory included with this guy is a pretty sensible one; it’s a tornado effect, demonstrating his powers.  When you wheel it along the ground, it will spin the figure, which is pretty fun.

THE ME HALF OF THE EQUATION

In the midst of Toys R Us closing, I was spending a lot of time at my closest store, and by extension, I was also spending a lot of time at the Target across the street.  They began their clearance process for their big reset a few months ago, and a bunch of Imaginext stuff was included.  Imaginext is already pretty reasonably priced to start with, so on clearance it’s an absolute steal.  It was hard to say no to Reddy at that point.  I quite like this guy, and I’m quite happy to have him.

#1746: Tenth Doctor

Posted by Ethan Wilson in Reviews and tagged with , , ,

TENTH DOCTOR

DOCTOR WHO (BIG CHIEF)

So, this week, I’ve mostly been playing catch-up with stuff that’s been piling up, which translated to an even split between Star Wars and Marvel, two of my most frequent subjects.  Today, I’m returning to a franchise I haven’t actually taken a look at in over a year, Doctor Who!  For the past few years, Big Chief Studios has been offering up some of the Doctor’s incarnations in high-end format.  Today, I’ll be having a look at their second version of fan-favorite Doctor, Ten!

THE FIGURE ITSELF

The Tenth Doctor was released by Big Chief in the fall of 2015.  He’s the second version of the Tenth Doctor released by Big Chief; by the time this figure was released, the first one was going for a rather hefty sum, so it was a sensible choice.  This figure is specifically based on Tennant from Series 4, his final year on the show.  The figure stands 12 inches tall and he has 30 points of articulation…at least going by the solicitation.  The exact articulation count is a bit difficult to get what with the outfit and all.  I’m willing to trust them on this one.

A lot of the cues that this is a Series 4 Doctor come from the head sculpt, or more specifically, the hair, which is notably springy and bouncy.  The sculpt is definitely one of this figure’s strongest suits.  It’s definitely a very close likeness of Tennant, though I’m not sure that it’s quite spot-on.  It’s a little hard to tell how much of that’s the sculpt, and how much of it’s the paint.  The prototype likeness is a little closer, which leads me to think it’s a paint thing.  It’s still not far off, of course, and as far as likeness goes, it’s about on par with a Hot Toys offering.  The paint’s not terrible.  In fact, it’s better than not terrible; it’s actually quite good.  You just have to accept that Big Chief is slightly less experienced than the likes of Hot Toys and Sideshow, and as such, they won’t be 100% the same quality.  The only real difference, I think, is that there’s a little bit less life behind the eyes.  It’s definitely a very minor, very subtle thing.

Ten’s outfit is made up of seven main pieces.  There’s the jacket, pants, shirt, tie, greatcoat, and shoes.  The clothes are all pretty well-tailored to the body.  Once again, not quite Hot Toys quality, but still pretty convincing for the scale.  The main suit is probably the best work, and replicates the styling of tight, very well-fitted suit that Tennant was known to wear in the show.  The tie is a little bit bulky, but admittedly, that’s the most difficult part to get right without risking it becoming too frail.  The shoes are a sculpted piece, which plug into place; they’re a very convincing recreation of his Chuck Taylors (as someone who wears a pair everyday, I can say they’re quite authentic).  Perhaps the weakest part of the whole ensemble is the great coat.  It’s not *terrible*, but it’s a little large for him, it’s kind of shapeless, and the fabric used doesn’t look quite right.  It’s also really light; it could have used some sort of weathering or something to help it look a little more “real”.  On the plus side, it has a wire running along it’s bottom edge, which allows for some nice, dynamic posing.

Ten is actually quite well-accessorized.  He comes with the basics, of course.  There’s an assortment of hands in all sorts of poses (including one holding the key to the TARDIS), as well as a pair of sonic screwdrivers (both extended and not).  There’s also a collection of episode-specific extras, largely geared towards Series 4-specific items.  He’s got three sets of eye wear: his glasses for when he’s being investigative, a pair of sunglasses, and his 3-D glasses from “Doomsday”. The arms on the glasses don’t quite fit properly over the hair, but you can get them pretty convincingly placed on his face.  He also includes his psychic paper with a note from River Song inviting him to the Library, his FOB watch in open and closed configurations, an Adipose, and an Adipose detector.  Lastly, he includes a display stand with a light up Galifreyian symbol.  And, if you want more display options, you can even remove the front flap of his box to use as a backdrop detailing the interior of the TARDIS.

THE ME HALF OF THE EQUATION

My Doctor Who collection has largely been given to me by my Super Awesome Fiancee, and it’s been understandably limited to smaller scale items, which have allowed me a wider range of characters for my display.  Big Chief got into the game just as I was weening myself off of the higher-end stuff, so I never bought myself any of them, despite a moderate interest.  While this figure isn’t quite on the level of a Hot Toys offering, he’s still quite a satisfying figure, and definitely great if you’re a Tennant fan.

As you may have pieced together, this figure isn’t from my personal collection.  He was provided to me for review by my friends over at All Time Toys.  They’ve actually got two of him available for purchase via they’re store, should you be interesting in owning this figure for yourself.  If you’re looking for other toys, both old and new, please also check out All Time’s full eBay store front, and take a look at their webstore at alltimetoys.com.

#1745: Iron Man

Posted by Ethan Wilson in Reviews and tagged with , , , , , , ,

IRON MAN

MARVEL LEGENDS (HASBRO)

“A Sleek suit design and technological upgrades let Tony Stark gear up as the Armored Avenger, Iron Man.”

I thought I was more or less done with the Infinity War-themed Marvel Legends, barring any late-game releases (which I’ve no doubt there will be), but no, no there was one more figure, that’s just been sitting there.  Waiting.  Watching.  Other “w” words as well…

Anyway, I’ve looked at most of the film’s major players, but there was one very prominent one missing, namely Tony Stark, aka Iron Man.  In a further effort to work my way through that pile of figures awaiting review, I’ll be looking at Stark’s latest Legends release today.

THE FIGURE ITSELF

Iron Man is the final figure in the Thanos Series of Marvel Legends, the first Infinity War-themed assortment of the year.  He’s also the last of the four specifically movie-based figures in the line-up.  And, most importantly, he’s the only figure in the set that isn’t needed to built the Thanos figure, which is why everyone was skipping him.  Tony’s wearing his Mark 50 armor from the film, which is also his *only* armor for the film, so I guess it’s a sensible choice, now isn’t it?  The figure stands 6 1/2 inches tall and he has 29 points of articulation.  His construction is very similar to the Mark 46 figure from the Giant Man series, but there are no actual pieces shared between the two.  This guy is an all-new sculpt, which does an okay job of capturing the Bleeding Edge armor’s design from the movie.  It’s not a spot-on recreation; it’s definitely not quite as sleek as the design in the movie.  There are far more pronounced ridges and connecting points, bringing its overall design closer to the Mark 46.  This is likely a symptom of Hasbro working from earlier designs to get the figure out before the movie.  Ultimately, it’s close enough that you know which armor it’s supposed to be, and it’s nowhere near as off as either Captain America or Cull Obsidian.  Fortunately, it’s got some pretty great proportions, and the articulation is also worked in pretty well.  Iron Man’s paintwork is decent and certainly eye-catching, but like the sculpt, it’s not 100% accurate.  The main culprit is the red.  It should really be a deeper, more metallic color than it is.  That being said, the color they’ve used is still nice to look at, so I’m not going to complain too much.  What I will complain about?  Just the figure’s single greatest failing: his accessories.  In the movie, Tony’s using this armor to create all sorts of nano-tech-based weaponry and tools.  What does this figure get?  An extra set of hands and the same blast effects pieces they’ve been using since the 46.  No extra attachments, no unmasked head, no build-a-figure piece.  The extra hands don’t even have hinges on the wrists.  That’s really weak.

THE ME HALF OF THE EQUATION

I passed on this figure quite a few times at retail.  After seeing the movie, I was really impressed by the armor.  I had some Cosmic Cash to spend at Cosmic Comix, so I ended up grabbing him from them.  And then he sat on my shelf for three months.  I know, bad Ethan.  I’ll be honest, I actually kept forgetting I hadn’t reviewed him, since I’d already looked at the basic figure.  The only real difference between the two is posability, and that’s a little sad.  He’s a figure that could have been a lot of fun–well, okay, he’s still a fair bit of fun, but he could have been a lot more fun than he is.  As it stands, he definitely feels phoned in.

#1744: Captain America

Posted by Ethan Wilson in Reviews and tagged with , , ,

CAPTAIN AMERICA

MARVEL MIGHTY MUGGS

Today I’m shifting gears, but only ever so slightly.  As with the last two days, I’m doing another Mighty Muggs review, because why not?  However, unlike the last two days, this one’s not a Star Wars review.  Yes, after only having Black Panther to start with, I did finally get a second Marvel character, paragon of all that good-natured, patriotic good-ness, Captain America!

THE FIGURE ITSELF

Captain America is figure 10 in the Marvel Mighty Muggs line.  That places him within the third assortment.  Cap is extra notable for being the first character in the whole relaunched line to get a second Mugg.  Who would have guessed it would be Cap?  Certainly not me.  The first Cap went for a more traditional design; this one instead gives us his Commander Rogers look, which has certainly gotten some mileage since its introduction in 2010.  It remains a favorite of mine, so I like seeing it turn up here.  Definitely a solid look.  The figure stands 3 1/2 inches tall and he has the usual movement at the shoulders, and some restricted movement at the neck.  Steve uses the basic Mugg body, with a new piece for the hair.  It’s definitely patterned after the look Chris Evans has been sporting in the movies, but there’s nothing wrong with that.  It’s a nice stylized translation of his look, and it works really well in conjunction with the painted details.  Cap, like all the other modern Muggs has three different faces, and a spring-loaded feature to show them all off.  Cap’s options include a confident smile, a goofy open-mouthed grin, and an angry teeth-bearing expression.  Of the three, my favorite’s definitely the confident smile, but all three are definitely fun.  As with the hair, all three faces appear to have some Evans influence going on.  Cap is the first of these guys I’ve reviewed to include an actual accessory: his shield!  Now, if you want to get super nit-picky, it’s a solid shield, and this costume should actually include his hard-light energy reconstruction, but that right there is a very minor thin, and if it bugs you too much, the shield can simply be removed from his hand.

THE ME HALF OF THE EQUATION

I had planned on grabbing the basic Captain America when he first hit, but this guy was shown off not too long after.  Given the choice, I opted to wait for this release.  I ended up grabbing him from a Walmart that had just put out a fresh case of the third assortment.  He’s I think my favorite so far of the modern Muggs.  He’s just a very good representation of the character, and given that he’s a variant, that’s really saying something.

#1743: Rey

Posted by Ethan Wilson in Reviews and tagged with , , , ,

REY

STAR WARS MIGHTY MUGGS

Remember how I was talking about having some Mighty Muggs piled up to review yesterday?  Well, yeah, let’s have a little bit more of that, shall we?  In fact, let’s have some more of the same subline from yesterday!  Yes, it’s time for some more Star Wars, specifically the franchise new lead character Rey!

THE FIGURE ITSELF

Rey is figure 02 in the Star Wars Mighty Muggs line, placing her second in the first assortment of figures.  Rey’s design here is taken from The Force Awakens, specifically her appearance from the Starkiller Base sequences.  It’s a little bit surprising given the general leaning towards the Last Jedi designs for the new trilogy characters, but it’s kind of a persistent look.  The figure stands 3 1/2 inches tall and she has three-ish points of articulation, if we’re counting the slight mobility at the neck joint.  Since she’s from TFA‘s final battle sequence, Rey uses the same lightsaber-weilding body that was used for Luke, with a unique hairpiece.  The hairpiece is a nice, stylized summation of her look from the movie, which fits in very well with the piece we saw on Luke.  For Rey’s three facial expressions, she goes for a similar selection to Luke.  She’s got a serious expression, a happy expression, and an angry expression.  Of the three, my definite favorite is the happy one, but the angry one works well, too.  Her stern expression is alright, but the mouth seems oddly small when compared to the other Muggs I’ve looked at.  It just throws her whole look off, and ends up making her look a bit more childish than the others.  But hey, 2 out of 3 ain’t bad, right?

THE ME HALF OF THE EQUATION

I saw Rey a few times before actually picking her up.  I think I was holding out that I might be just grabbing the whole set of the first series, but I never did get around to that.  I eventually got around to picking up Rey from GameStop while visiting Super Awesome Girlfriend Fiancé there one day.  She’s a nice companion piece to Poe and a pretty fun little figure all around.

#1742: Poe Dameron

Posted by Ethan Wilson in Reviews and tagged with , , ,

POE DAMERON

STAR WARS MIGHTY MUGGS

Man, I got a little side-tracked in my reviewing habits, and somehow, I’ve got this whole pile of “new” figures that have now gone months without being reviewed.  So, I guess I gotta make my way through some of that piles.  One of the lines that’s been the most neglected has been Hasbro’s relaunch of Mighty Muggs, which they’ve been trying to set-up as a competitor to Funko’s Pop! line.  Their primary focuses have been Marvel and Star Wars.  Today’s figure is Poe Dameron, from the latter license.

THE FIGURE ITSELF

Poe Dameron is figure 9, part of the second assortment of Star Wars Mighty Muggs, which hit shelves a couple months back, right around the time Last Jedi was released on home media, in fact.  Poe’s got a few different designs to go with, so this one goes with his pilot gear.  It’s the one that crosses over from Force Awakens and Last Jedi, so I guess that makes it a reasonable choice.  The figure stands 3 1/2 inches tall and has articulated shoulders, just like the other two I’ve looked at.  Also, since reviewing the last two Muggs, I’ve discovered that the head *can* turn; it’s just really tight, and only ratchets into one of four positions.  Still, it’s better than nothing.  Poe uses the same body as Luke and Black Panther, but with a unique helmet piece, patterned after the helmet he wears in the movie.  It’s pretty well-rendered and captures the look from the movie quite nicely.  Poe, like the other new Muggs, features three different facial expressions.  He’s got serious side-eyed, cocky smile, and intense and teeth-gritty.  They’re all pretty decent, and actually have a solid likeness of Oscar Isaac.  The slightly odd thing is that the cocky smile face doesn’t have the lenses like the other two.  Not really sure why, but it makes giving him an unhelmeted look even easier, provided you can find a proper hair piece.

THE ME HALF OF THE EQUATION

I grabbed Poe from Target when he was first release.  I was pretty happy when he was announced, and kept an eye out for him as soon as the line started to hit.  He’s not my preferred look for Poe, so I’d definitely like to see another one, but he’s a fun addition to my quickly growing Mighty Muggs collection nonetheless.

#1741: Hoth Rebel Soldier

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

HOTH REBEL SOLDIER

STAR WARS: POWER OF THE FORCE II (KENNER)

“The Empire has located the Alliance’s secret headquarters on the Ice Planet Hoth. During the consequent invasion, Rebel Soldiers hold out bravely against an unbeatable ground assault until a retreat salvages their heroic effort.”

When it comes to Star Wars-related army building, the Stormtroopers and their ilk get the lionshare of the attention.  I guess a lot of people like to stack the odds against the heroes a bit, but it’s also a little easier to buy lots of faceless minions.  The Rebels, by comparison, all have a face, making buying a bunch of the same figure for the purposes of an army a little more difficult.  Not impossible, but difficult.

THE FIGURE ITSELF

The Hoth Rebel Soldier was released in 1997, as part of the third year of Power of the Force II‘s run.  He was one of two Rebel Troopers released that year.  The figure stands 3 3/4 inches tall and has the usual 6 points of articulation.  The Hoth Rebel Soldier is a little different than the previously reviewed Endor Rebel Soldier, who was an amalgam of a few soldiers from the movie.  This guy’s actually directly based on one of the soldiers seen in the trenches on Hoth during the Empire’s attack.  The trooper he was based on was even shown on the packaging for this guy, allowing you to pick him out in the movie proper.  While this makes him more screen accurate, it does have the flipside of making him less an army builder and more a very specific background character from the movie.  Honestly, I’m a little surprised he doesn’t have a proper name, like Leber Reidlos or something.  That feels right up the Star Wars EU’s alley.  Wasted opportunity if you ask me.  Anyway, Leber’s sculpt is mostly unique. The legs were shared with the Deluxe Hoth Rebel Soldier from the same year, and the head would later be stuck on the Hoth Luke body for the Saga line in 2003.  That said, the parts were all pretty well sculpted.  The uniform is very sharply defined, especially compared to some of the earlier figures in the line.  There’s a lot of detail going on there.  His head matches up pretty decently with the guy we see on the back of the card (though his goggles are off of his face; a minor change), and likewise features some solid detailing.  Leber’s proportions are not terrible for this line.  I mean, they’re still way jacked up from real life, but at least he looks mostly human (which is better than can be said for another Rebel Trooper released that same year).  His paintwork is kind of monochromatic, as you would expect for a guy that’s trying not to stand out.  It matches pretty well with the movie, and it’s surprisingly well-detailed for a background character.  Leber is packed with a blaster rifle and a survival pack.

THE ME HALF OF THE EQUATION

Growing up, this was another of the figures that was jointly owned by me and my cousin and kept at our grandmother’s house.  When we finally divied them up, my cousin got this guy, since he was more of a Hoth fan than I.  The figure reviewed here was just recently added to my collection, courtesy of Lost in Time and one of their sidewalk sales.  He’s not a bad figure at all, and I’m actually pleasantly surprised by him.  That said, he’s less an army builder, and more a unique extra to fill up the background of your collection.

#1740: Classic White Tiger & Hand Ninja

Posted by Ethan Wilson in Reviews and tagged with , , , ,

CLASSIC WHITE TIGER & HAND NINJA

MARVEL MINIMATES

The 38th Series of Marvel Minimates was themed around Marvel’s Daredevil-centric “Shadowland” event.  It wasn’t exactly the most memorable event they’ve run in recent years, but the corresponding wave did at the very least serve to showcase a few of Marvel’s street level heroes, as well as giving us our first crack at one of the more established army builders of the Marvel Universe, the Hand.  Today’s set touches on both of those things, giving us lower-tier character White Tiger, alongside a generic Hand Ninja!

THE FIGURES THEMSELVES

Classic White Tiger and the Hand Ninja were the one-per-case variant set for Marvel Minimates Series 38, with this White Tiger being swapped out for the regular set’s more modern rendition.

CLASSIC WHITE TIGER

By the time of “Shadowland,” Hector Ayala had been dead for a little while, and had passed the title and the amulets that gave him his power on to his niece Angela del Toro (who was the White Tiger that participated in “Shadowland”).That said, how else were we going to get a classic White Tiger? The figure stands 2 1/4 inches tall and has 14 points of articulation.  White Tiger is almost a vanilla ‘mate.  The only deviation from the main base body is a pair of flared gloves.  I suppose an argument could be made for having the amulet be sculpted, but it honestly works fine as is.  Beyond that, the character’s design is meant to be pretty simple, and the ‘mate gets that right.  The paint on this guy is okay, but does have a few drawbacks.  The overall detail work is pretty solid, and I think they’ve done quite a nice job of capturing all of the musculature and such.  The detail lines don’t appear to be a clean black like others in the assortment.  This, coupled with the largely white palette, makes him look a look a little washed out.  I think the most disappointing thing about the paint, though, are the lines depicting the bands going around his shins.  They’re only on the front and outward-facing side of each leg, which looks rather silly, and is especially noticeable on a tampo-reliant figure such as this one.  There were no accessories included for White Tiger.  I’m not sure what he could have been given, but an extra unmasked head or something might have been nice.  As is, he’s quite light on parts.

HAND NINJA

The Hand were major players in the whole “Shadowland” event, and have been rather prominent over on the Daredevil side of things for a while.  Their inclusion here was definitely sensible, and at the time they were certainly a highly demanded army builder.  The Hand Ninja has no shortage of sculpted parts.  There’s a hood, a vest, a sash, wrapped hands, armored boots, and a pair of sheaths for his Sai.  Amazingly, there’s not a single unique piece on this figure.  The hood comes from Series 29’s Moon Knight, the vest from Series 9’s Lady Deathstrike (with the quiver from Series 20’s Hawkeye glued on the back), the sash from the Previews-exclusive Dark Phoenix, the boots from the Dark Avengers Ares, and the sheaths from Series 28’s Deadpool.  Only the wrapped hands are technically new, and they were actually sculpted for this very same series’ Iron Fist ‘mate.  Despite their multitude of origins, the pieces actually go together quite well, resulting in a very cohesive, and quite unique looking, Hand Ninja.  Most impressively, all of these extra parts can be removed and a standard pair of hands and feet swapped out, allowing for an almost completely different classic Hand Ninja. Paint is relatively simple on this guy when you get down to it.  He’s got two different tones of red, which go well together, and then some detail lines on his face/mask and his torso.  Not a lot going on, but it’s all very clean, and the main shade of red is really bright and eye-catching. In addition to the extra hands and feet that facilitate the classic Hand Ninja transition, this figure also includes two Sai, a large sword, a bow, and an arrow.  These weapons allow you to arm up your army of Hand Ninjas in all sorts of different ways, thus adding an extra level of fun to them.

THE ME HALF OF THE EQUATION

I purchased this pack and the rest of the series brand-new from Cosmic Comix, back when they were first released.  I remember they hit around the same time as the Thor series and Excalibur boxed set, so I had a lot of Minimates going on there.  They were one of my first sets to be purchased while living on my college campus, and I remember sitting at my desk in my dorm room opening them all up.  This set was a surprisingly solid pairing that quite stuck with me.  Classic White Tiger was a sensible choice for a variant.  He’s one of those characters that’s never really been in the focus, but it was nice to get him in figure form nevertheless.  This figure’s definitely on the simpler side, and he has some flaws, but he’s generally well-executed.  After a couple assortments of sort of weak army builders, the Hand Ninja was a breath of fresh air, not only in terms of choice of character, but also in terms of quality of the end figure.  DST put a lot of effort in on this guy, and also showed that you can really do a lot with re-used parts.  Hands (heh) down the strongest figure in this assortment.

#1739: Batman – The Dark Knight Returns

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

BATMAN — THE DARK KNIGHT RETURNS

ONE:12 COLLECTIVE (MEZCO)

I told you there’d be another Batman review this week.  See, I’m not a liar!

Today, I’m continuing the DC trend, but moving away from Mattel, and indeed moving away from the lower-end styling of figures they offer.  Instead, I’m turning my sights onto Mezco’s One:12 Collective line of high-end 6-inch-scale figures.  I’ve only looked at one figure from this line before (Space Ghost), but he very much impressed me, and I’ve been eager to check out more from the line.  Today, I’m going back to the very beginning of the line (as well as bookending my reviews for this week) and looking at Batman, based on Frank Miller’s classic The Dark Knight Returns story.

THE FIGURE ITSELF

Batman was the inaugural release in Mezco’s One:12 Collective line, released in the summer of 2015.  A consistent feature of the line has been single releases with a number of color variants all released around the same time through various different means.  Even amongst his peers, this release of Batman was kind of drowning in variants.  The one seen in this review is the Previews Exclusive release, based upon Batman’s more classically-inspired color scheme from early on in the story.  The figure stands 6 1/2 inches tall and he has over 30 points of articulation.  For that articulation count, I’m just going by the solicitation info for this guy, since he’s sewn into his costume, thereby making a 100% articulation count a little bit difficult.

Batman was packed with two different heads, though they both end up being pretty similar, with only the expression changing between them.  He’s packed wearing the angrier, teeth-baring head, but there’s also the second one, which is also angry, but you can’t see the teeth, so I guess his slightly less angry?  That’s just my teeth-to-anger scale though.  Yours may differ.  Both heads are very sharp sculpts, which pretty expertly capture Miller’s artwork from the series.  Particularly impressive is the slight texturing of the cowl on both heads; it’s very subtle, but enough to keep the mask from looking to simple, like a smoother surface might.  I’d be hard-pressed to pick my preferred of the two heads, because they’re both very good.  Which one is better really depends upon what sort of pose you want the figure in.  Paintwork on both heads is fairly internally consistent.  The application is quite clean, his palette is appropriately washed out, and there’s even a nice dark grey wash over the face to give him a more dynamic, comic book-inspired appearance.

Despite his smaller stature, Batman is built in a similar fashion to a 1/6th scale item, with an underlying body and a cloth costume.  Space Ghost was built on a smaller body than the one here, but they’re similar in construction.  It poses very well, which is the most important thing by my count.  The costume is made up from a mixed media effort.  The main body suit, shorts, and cape are all cloth items.  They’re pretty well tailored to the body, though the shorts could perhaps be a little tighter fitting.  They aren’t too off, but they definitely end up looking pretty similar to a Mego offering.  The body suit has the logo screened onto it.  It’s a rubbery sort of material, so it shoulded end up stretched out or anything over time. The cape is one of the more impressive Batman capes.  It’s a thin material with no internal wire or anything, so I wasn’t expecting much at first, but it hangs really well on the body and is a lot of fun to mess with during posing.  The belt, cuffs, and boots are all sculpted elements, as is the neck piece that goes under the cape and holds the costume in place.  The sculpted detail is quite impressive, and the boots and gloves in particular are very nice, as they’ve been done up with texturing to match the masks on the two heads.

The accessory complement for this Batman is definitely a solid selection of extras.  In addition to the two heads, he’s got four different sets of hands (in fists, open palm, gripping, and batarang-wielding configurations) which make for lots of fun options when posing.  He’s also got a leg strap of pouches, as he sports for some parts of the story, his rifle, a grappling hook, and a display stand.  The display stand can be used as either a standard pegged stand or a flight stand, and in the flight stand configuration, there’s an extra wired attachment, which can be used to dynamically pose the cape.  It definitely takes some getting used to, and I couldn’t really see myself using it for long term posing, but it certainly helps with some nice photo set-ups.

THE ME HALF OF THE EQUATION

I was very much tempted by this figure when he was originally released, but as only a moderate fan of Dark Knight Returns, I didn’t know if I could justify the higher price tag.  Still, I’ve been intrigued by this figure since its release, and having it in hand, I can definitely say this is one of the best Batman figures out there.  I’m now really interested in checking out Mezco’s follow-up Batman, the Ascending Knight.

The item reviewed here is not from my personal collection, but was instead provided to me for review by my friends at All Time Toys.  If you’re interested in owning the very Batman figure reviewed here today, head on over to their eBay listing for this item.  If you’re looking for other toys, both old and new, please also check out All Time’s full eBay store front, and take a look at their webstore at alltimetoys.com.