Category Archives: Reviews

#1460: Luke Skywalker in X-Wing Fighter Pilot Gear

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

LUKE SKYWALKER in X-WING FIGHTER PILOT GEAR

STAR WARS: POWER OF THE FORCE II (KENNER)

” Growing up on the twin-sun planet of Tatooine, Luke Skywalker had always looked tot he stars. He had been told that his father was a great star pilot, and it was clear that the young Luke had inherited some of his skills. In the arid deserts of the Jundland Wastes, Luke and his best friend Biggs Darklighter, would race their T-16 skyhoppers. Tagging womprats in Beggar’s Canyon or threading the Stone needle, Luke and Biggs were the best of friends, and daring pilots. Unfortunately, they were separated when Biggs went to the Academy, and Luke was forced to stay behind.”

Luke Skywalker figures are a hot commodity these days, due to his almost total absence from the main Star Wars toy lines for the better part of two years.  For a good portion of the franchise’s run, it was hard to go anywhere without tripping over a whole pile of Luke Skywalkers. There were a dozen Lukes in the Power of the Force II line alone, and I’ll be looking  at another one of that particular subset today, with Luke in his X-Wing Fighter Pilot Gear.

THE FIGURE ITSELF

Luke was released in Power of the Force II‘s first year, as a later addition to the assortment.  He was the second Luke in the line, and the second figure of Luke in this particular gear in general.  Despite the claims on the package that this is Luke in his “X-Wing Fighter Pilot Gear,” which is a little bit misleading.  The figure’s actually wearing his cold-weather flight gear that he puts on to pilot his Snowspeeder during the Hoth Battle from Empire.  He does eventually wear it while flying his X-Wing later, but it’s still more commonly viewed as his Snowspeeder gear.  Not that the two designs are that dissimilar, of course.  The figure is about 3 3/4 inches tall and he has 6 points of articulation.  The sculpt was unique to this guy at the time of his release, however the body ended up getting re-used later down the line for both Wedge and Dak.  Until around 2010 or so, this was actually the only Hoth flight-suited sculpt Hasbro had on hand.  Just like the rest of these early figure’s, it’s a rather dated sculpt.  He’s got the usual exaggerated proportions, albeit masked a little bit by the more padded nature of the design.  He’s still got the insane bulging muscles, and the crazy thin waist, of course.  On the plus side, the detailing on the costume is pretty decent; the ridges on the arms are pretty cool, and the helmet, while a bit on the tiny side, is quite accurate to the source material.  Said helmet is permanently attached to the head, and missing the visor, but removable helmets were still a ways off at this point, so this isn’t bad.  His face is a slightly different likeness than the other Luke’s from this line.  It’s still a bit off, looking more like Ron Howard than Mark Hammil, but that’s a step in the right direction at least.  The paint work on this figure is on par with the rest of this line’s offerings.  It’s pretty clean overall, apart from a few fuzzy lines on the edge of the vest.  Luke is packed with his lightsaber and a small blaster pistol.  The lightsaber is a lot shorter than the initial Luke saber, but I choose not to judge him for that; Hoth is very cold.

THE ME HALF OF THE EQUATION

I got this figure when he was relatively new.  I had gotten the PotF2 X-Wing Fighter as a gift, and didn’t yet have the proper Luke to fly it, so I obviously had to buy this guy.  Along the way, my original was lost, more than likely sold during one of my “purges” over the years.  The one reviewed here is a replacement, picked up at Farpoint a few years back.  He’s hardly the best pilot Luke figure out there, and he certainly shows the line’s flaws quite overtly, but he was my first pilot Luke, and he still holds an important spot in my collection.

#1459: Justice League Rebirth Set

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , , , , , , ,

SUPERMAN, BATMAN, WONDER WOMAN, FLASH, GREEN LANTERN, AQUAMAN, & CYBORG

DC ICONS (DCC)

It’s Friday, which means it’s time for another entry in my latest recurring feature…F-DC F-icons Fridays?  Yeah, there’s a name that’s catchy and rolls right off the tongue.  Not content to just review one DC Icons figure a week, I’ve decided to continue my descent into madness and review seven of them in one day.  And you all get to be here for that descent.  Don’t you just feel so special? Without further ado, let’s look at the Justice League!

THE FIGURES THEMSELVES

Superman, Batman, Wonder Woman, Flash, Green Lantern, Aquaman, and Cyborg were released in March of this year in the “Justice League Rebirth” boxed set, as part of the DC Icons line.  The set’s actually been in progress since mid-2016, when it was initially shown as a New 52-themed set, before being updated to reflect the characters in their most recent looks (for the most part), and tying it into the DC Rebirth relaunch.

SUPERMAN

This figure’s my primary reason for grabbing this set, since Rebirth actually got me reading Superman and Action again.  This figure actually just saw a single release a few weeks ago, which looks to be identical, apart from the packaging.  The design of this figure comes from the initial Rebirth books, after the older Post-Crisis Clark took over the identity again.  It’s already been replaced by a tweaked design, but it’s not too far off.  I actually quite like this design; it’s not the classic look, but it’s way ahead of the other post-New 52 looks.  It’s still weird to see a Superman without the red shorts, but I think making his boots blue helps to alleviate some of the color imbalances caused by that.  The figure stands 6 1/4 inches tall and has 29 points of articulation.  Superman follows the “new” scale for Icons, meaning he’ll fit in best with figures from later in the line’s run.  He’ll also fit with some Marvel Legends depending on how much of a stickler you are for inter-character scaling.  He’s a little smaller than a Legends figure built on the Reaper body (as seen in the comparison pic with Cap).  Since he’s so sized up, he can’t really use any pieces from the first Icons Superman, making this figure an all-new sculpt.  It’s not bad work at all.  The build of the figure seems about right for Supes, and the proportions are all pretty balanced.  Detailing is all pretty clean and bold as well.  The head is pretty solid too; it’s got a nice friendly expression that seems right for Clark.  It feels maybe a touch wide, and perhaps a bit young for the more experienced Clark Kent this figure is meant to represent, but by and large I find myself really liking it.  The cape is made from a soft plastic, and it’s very nicely done.  After years of Mattel capes that have to be attached with a huge brick that utterly ruins the flow, this is a very refreshing piece.  In terms of paint, Superman is decent, if perhaps not fantastic.  The basic colors are all good matches for the source (the blue is a touch dark for my taste, but that’s accurate) and he looks pretty slick overall.  My only real issue is with the face, which just seems a little bit lopsided.  It’s the sort of thing that looks totally fine from most angles, but really goofy if you catch it the wrong way. Still, good work overall.  Superman includes no accessories.  Of course, that’s true of the entire set.  At least Supes doesn’t feel too light without the extras.

BATMAN

This guy also saw a single release, at the same time as the Superman figure.  It’s hardly a shock, what with it being Batman and all.  Batman is also sporting his look from Rebirth, but he’s been fortunate enough not to have it already change on him.  It’s another decent design.  It doesn’t speak to me quite as much as the Superman design, but that’s less about any particular element pulling me out, and more about it not being too terribly different from all the other Batman designs in recent years.  I can point out what’s different between this and the New 52 design if put on the spot, but they’re fundamentally the same.  Well, this one has less tactical-tech lines, which is certainly a plus.  The figure is 6 1/4 inches tall and he has 29 points of articulation.  Batman’s maybe a smidge taller than Superman, depending on posing.  I generally like for Bruce to be a little shorter, but it’s easy enough to have Clark standing straight and Bruce slightly hunching.  The important thing is that this Batman is taller than the Icons Nightwing, which can’t be said of the first Icons Batman (which is absolutely dwarfed by this release).  The very first prototypes of this set showed Batman using quite a few pieces from the older figure, but this guy ended up as a totally new sculpt.  It has its pluses and minuses, to be sure.  As a whole, I think it’s a strong sculpt, and it does a good job of conveying a modern era Batman.  He’s got a good, solid build, and the details on the costume appear to be more or less accurate to his new design.  The mouth seems ridiculously pouty, but Batman is the king of brood, so I guess that just goes with the territory.  His head is set a little higher on the barbel than other Icons figures, which can look a little off in straight standing poses, but actually affords him a good deal more range on his neck joint, which is pretty nice for a guy who does a lot of hunching.  The figure’s topped off with another nicely rendered cape, which has a flow to it that is just as well-crafted as, but completely unique from, Superman’s.  Paint on Batman is very solid work.  Nothing seems out of place like on Superman, and everything’s very bold and clean.  Perhaps the purple could be a little more noticeably different from the black on the cape, but that’s a very minor complaint.  Batman feels a little more hurt by the lack of extras; at the very least a batarang or something would have been nice.

WONDER WOMAN

This set’s Wonder Woman was actually the first in the line, though her single release wasn’t far behind. Unlike the last two, Wonder Woman’s single release was quite a bit different, leaving this one still exclusive to the larger set.  Wonder Woman was another big motivator for me buying this set since, like Superman, Rebirth got me reading her title again.  She’s sporting her first Rebirth look, which was sort of an update on her classic look, with a dash of the movie design thrown in.  She’s switched to something even more movie inspired since, but as with Superman, I sort of prefer this one.  The figure stands almost 6 3/4 inches tall and she has 29 points of articulation.  Yes, you read that height correctly; Wonder Woman really is almost a half an inch taller than Superman and Batman.  I’m not inherently opposed to her being taller than the other two (my favorite take on Diana is most certainly Darwyn Cooke’s, and he drew her as an inch or so taller than Clark), but this feels like a little much.  I think my issues ultimately stem from how the height is distributed; her proportions are a little out of whack, so her legs, specifically her thighs, end up taking most of the height and looking a bit longer than they should.  There’s a similar issue with the arms, where the forearms and biceps look really long relative to the shoulders and torso.  If you look at the comparison between her and the other two, you can see that despite her pelvis being a good half-inch higher than the other two, the hands all end in the same spot.  It’s not awful, but it does look a little off, at least in comparison to the other figures in the set.  On the plus side, it does make her the one figure in this set that fits in with Legends without any fudging.  Regarding the quality of the sculpt on its own, this figure’s a bit tricky.  Based on photos online and my initial reaction right out of the box, I was all ready to hate on the sculpt.  But then I took her out, and was messing with her for the photos and such and I realized it’s actually not a bad sculpt at all; it’s just an exceptionally hard to photograph one.  This figure looks very different based on the angle you catch her from, and she really doesn’t look great viewed from above.  But, head-on, she actually looks rather nice.  Yes, the proportions are still a little off, there’s no denying that, but I like more about this sculpt than I dislike.  Given the right pose, she actually looks pretty great, and given just how bad a lot of prior Wonder Woman figures have been, that’s very much a compliment. Wonder Woman’s paint work is definitely on the better end of things.  From what I’ve seen, there’s a bit of variance on the face, but mine seems to have turned out alright, and I really dig how bright all the colors are.  I didn’t know colors were allowed to go that bright on a DC figure.  Wonder Woman gets hit pretty hard by this set’s lack of accessories, because it means she loses her defining weapon: a big ol’ sword!  I jest, of course.  Who would ever think her defining weapon was a sword?  That’s just silly.  She’s actually missing her lasso, which is a real staple of the character, and a rather glaring omission.  It would have been nice to at the very least have it coiled up hanging from her belt.

THE FLASH

Flash is one of the two figures in this set who I’ve looked at an Icons figure of before.  I was overall impressed by the Series 2 figure, so I wasn’t really in the market for another, especially not one based on his super line-y New 52/Rebirth design.  And yet, here we are.  Flash’s design was essentially unchanged for Rebirth; the only noticeable difference here is the lack of chin strap, but a quick Google search shows that totally varies from artist to artist.  The figure stands 6 1/4 inches tall and has 31 points of articulation.  Flash’s sculpt is all-new to this figure, but looks to have used the prior figure as a starting point at the very least; the musculature and sizing are all about the same, but the specifics of the costume have changed.  All of the yellow lines are etched into place, and there’s added details on the boots.  The head is a completely original piece, totally different from the Series 2 figure.  Since the head was the only part of that figure I had an issue with, I was intrigued by this one.  I’m happy to say, I find this one to be a serious improvement over the original.  The yellow lines aren’t etched into the head, so there’s a part of me that’s tempted to try and remove them so I can put this head on the old body, because I like it that much.  The paint work on Flash is mostly good, aside from one glaring issue:  he’s got a big spot of missing paint on the right side of his chin.  It’s a pretty noticeable flaw, and I’m definitely going to have to break out my paints to fix it.  Not the sort of thing I like having to do right out of the box, but I feel confident this is a one-off.  The lack of accessories for Flash is a bit less of an issue, but I do wish his default hands were flat running hands instead of fists.

GREEN LANTERN

GL is the other character for whom I’ve already reviewed an Icons release, and this figure’s even less different than Flash.  At first glance, this is a straight re-release of the deluxe Hal Jordan figure from Series 2.  However, that’s not quite the case.  You see, that figure was 6 inches tall, but this one is 6 1/4.  He’s also got tweaked hips to add the drop-hips that the rest of the set feature, so my first thought was that they’d simply sculpted new thighs with added height. Upon closer examination, I found that the entire figure has actually been ever so slightly enlarged, in order to bring him into scale with the rest of the set.  What’s more, the details of this figure’s sculpt are a lot crisper than those of the earlier figure, and the green has been changed to a more metallic sheen.  I loved this figure the first time I got it, and I still love it here.  Of course, I’m also frustrated by it, because it’s just different enough that it’s not a straight duplicate, so now I have to keep it.

AQUAMAN

You know the old saying: “if an Aquaman figure is released without a trident, does he make a sound?”  …Maybe that’s not quite it.  Regardless, here’s this Aquaman figure.  He’s based on the Rebirth design, which isn’t that much different from his classic look, apart from the gold around the collar and the lack of black shorts.  This figure stands about the same height as all of the other figures in the set, and has 29 points of articulation.  He’s really just a reworking of the single-release Aquaman, though, like with GL, he seems to have been scaled up ever so slightly.  The real difference between the two Aquamen is the head.  I can’t say I’m much of a fan of this one.  It looks fine on the prototype and all, but something was definitely lost in translation, leaving him looking rather goony.  It’s possible it’s just the paint making it look that way, though.  The rest of the sculpt is pretty top-notch.  The build is appropriate for him, and I really like the detailing on the scales of his shirt.  His paint is fairly decent; the colors are bright, and, apart from the odd placement of his eyes and a little bit of bleed over from his belt, it’s fairly well applied.  Aquaman’s lack of accessories here means that he doesn’t include his trident.  And I’m okay with that, because despite what pretty much every Aquaman figure ever would have you believe, he doesn’t really use a trident all that often.

CYBORG

This figure’s presence in this set frustrates me, because it sort of continues a persistent problem I’ve had with DC for several years now.  They keep shoving Cyborg into the Justice League, and it just upsets me.  I like Cyborg.  I like the Justice League.  I don’t really like Cyborg in the Justice League.  Especially when it’s at the cost of Martian Manhunter as a member, which it almost always is.  And that’s what the case is here.  In a seven figure Justice League set, I kind of expect a Martian Manhunter.  But noooooo.  No, in this set, we got Cyborg.  Cyborg who also got a single release with accessories.  Instead of Martian Manhunter, who was completely left out of the line, leaving my Icons Justice League sadly incomplete.  And of course, now I have a Cyborg, but not Titans to go with him, meaning that’s another incomplete team.  Bleh.  I’m sorry, all that ranting is largely to do with the fact that I *actually like* this figure.  Quite a bit, in fact.  His sculpt, even though it’s based on a more modern Cyborg than I tend to go for, is top-notch.  It’s sleek, well put together, and just plain cool looking.  He’s got 31 points of articulation, and it all works really, really well.  The joints are smooth, and the mobility is pretty sound.  He’s probably one of the best in the set, posability-wise.  Perhaps the only drawback to the figure proper is his lack of extras, since his forearms have clearly been designed to swap out for other arm attachments.  Just one of those would have been really cool.

THE ME HALF OF THE EQUATION

After picking up Nightwing and Supergirl, and finding out that just about everything I wanted from Icons was cancelled, I was admittedly a little bummed.  That being said, I recalled that this set had been released, and I had checked it out a few times, before ultimately deciding it was a little bit on the pricey side for me.  I still really wanted that Superman, though, so I was excited to hear he was getting a single release.  I was less excited to hear that he was going to run me almost $30 and feature no additional accessories.  It was around this time that I discovered that Barnes & Noble’s website had marked this set down to half of it’s original value, and were also offering free shipping and $5 off orders over $25.  The final cost was $45, which is $6.43 a figure.  And that’s an amazing deal.  Superman’s awesome, as is Batman.  Wonder Woman’s better than I expected, if not perfect.  Flash isn’t my ideal costume choice, and has that one annoying paint flaw, but is a very good figure.  Green Lantern’s not the total repeat I expected, and fixes a few minor issues with the original.  Aquaman’s head sucks, but the single release has a spare head I can toss on the otherwise solid figure.  And I ranted a bit about Cyborg’s spot in the set, but he’s still a very, very well crafted figure.  If you want to give Icons a chance, I heartily recommend this set, and feel obligated to inform all of my readers that it’s still available at the discounted price on barnesandnoble.com.

#1458: The Thing

Posted by Ethan Wilson in Reviews and tagged with , , , ,

THE THING

FANTASTIC FOUR (TOY BIZ)

“Ace test pilot Ben Grimm found his life was forever changed after a fateful trip on an untried spacecraft. Exposure to cosmic rays caused Grimm to evolve into a hulking, brutally strong creature, with a thick, orange, rock-like hide. Dubbing himself The Thing, Grimm, along with Mr. Fantastic, the Human Torch, and the Invisible Woman, decided to make the most of his transformation and aid humanity by becoming a valued member of the Fantastic Four. His unbelievable strength and endurance, combined with his bravery, loyalty and innate kindness make The Thing one of the most heroic humans ever to walk the Earth!”

Almost exactly four years ago, I spent several of my earliest reviews on this site looking at six of the seven figures in the first series of Toy Biz’s Fantastic Four line from the ’90s.  I didn’t review the seventh because he was the only one I didn’t own.  Now I own him, and so now, after four years, I’m completing my reviews of Fantastic Four Series 1.  Let’s look at Benjamin J Grimm, aka the ever-lovin’-blue-eyed-Thing!

THE FIGURE ITSELF

As touched on in the intro, the Thing is one of the seven figures in Series 1 of Toy Biz’s Fantastic Four line, based on the cartoon from the mid-90s.  Ben, like the rest of the titular team, is wearing a variant of his John Byrne-designed costume from the ’80s.  It’s a standard look, and was his main look in the cartoon, so it made sense here.  The figure stands about 5 1/4 inches tall and he has 10 points of articulation.  This version of Ben was sporting an all-new sculpt, which was only ever used for this one figure (barring a few direct re-releases).  Unlike later Thing figures from this line, this guy wasn’t directly based on the cartoon, and as such presents a slightly more detailed take on the character.  I think this may be the best sculpted Thing figure that Toy Biz ever released, quite frankly.  It’s really very good.  There’s a ton of detailing on his rocky skin, he’s got just the right build, and they even managed to very nicely convey Ben’s attitude on the face.  What’s more, the belt on his shorts even has little wrinkles and some stretching, which is an awesome touch.  Comparing this figure to something like Mole Man, who is from the very same series as this figure mind you, is like night and day.  Whoever sculpted this guy had a fun time.  Now, I’m not going to say that the paint ruins this figure, because it certainly doesn’t, but there’s a definite step down from the sculpt to the paint.  There’s paint for the eyes, the belt, and the shorts.  That’s it.  The rest is all the same shade of molded orange plastic.  That was Toy Biz’s style at the time.  That was the style of action figures in general at the time.  And it doesn’t ruin the figure.  But this sculpt would look a ton better with even the tiniest bit of accent work.  The Thing included no accessories, but he does have a “Clobberin’ Time Punh” action feature: when you turn him at the waist, his arms swing up and down. Fairly standard for this era of figures, but I like that it adds a little something to the figure without risk of ruining the sculpt or posability.

THE ME HALF OF THE EQUATION

Growing up, my main version of Ben was the trench coat-wearing variant from Series 3, so I never had this one.  I’ve been on the lookout for one for a few years now, but it was never a really a search I put a ton of effort into.  This year at Shore Leave, one of the vendors I buy from pretty regularly had gotten in a stock of new loose figures, and thrown some of the more beaten-up figures into the dollar bin.  I was mostly happy meal toys, knock-offs, and the like, but I did dig this guy out.  He was covered in god-knows-what, but I figured it was worth it to grab him and see what sort of condition he was in.  So, I got him home, and I sat down with my cleaning supplies, and after about a half an hour or so, I had a Thing figure that was in pretty great shape.  And now my Series 1 set is complete.  For a dollar.  Not bad.

#1457: Mercury

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

MERCURY

TRON 2.0 (NECA)

“Jet Bradley, a young computer engineer working for ENCOM, must step into the digital world in search of answers.  He uncovers a sinister plot spinning out of control that threatens to corrupt one reality and forever transform another.”

Tron Legacy is perhaps one of my favorite movies ever.  In terms of toys, though, it’s also one of the biggest disappointments ever, with some of the most lackluster offerings imaginable under its belt.  The Tron franchise in general hasn’t really tended to have much luck with toys.  The only entry to really escape this curse is Tron 2.0, 2003’s video game sequel to the original film.  In it, the son of one of the original film’s heroes goes into the digital world looking for his missing father, and he’s aided by a kick-butt female program sent by his father to help…wait, this sounds familiar.  Yeah, there are a few similarities between 2.0 and Legacy, but they’re actually pretty superficial.  Anyway, when 2.0 hit, they went all-out and had some figures made, which were produced by the fine folks at NECA.  Today, I’ll be looking at the previously mentioned kick-butt female program, Mercury.  No, she’s not Quorra, but I’ll try not to hold that against her.

THE FIGURE ITSELF

Mercury is one of the four Tron 2.0 figures NECA released in preparation for the game’s release.  She hit in early 2003, about 5 months before the release of the game.  The figure stands about 7 inches tall and she has 11 points of articulation.  She’s not the most mobile figure ever, but given that NECA was still moving past their usual McFarlane-style plastic statues at this point, she was actually pretty decent.  Honestly, my only real issue is with the v-hips; that’s a style of joint I’ve just never really lived.  Obviously, she’s based on her in-game design, though it’s a slightly idealized version.  Since the graphics of a 2003 video game were still a little bit compromised, this figure sort of smooths some things out and presents a slightly more realistic composition.  She’s still a bit6 stylized, of course, since she’d look a bit weird if she wasn’t.  They kept the essence of the character without the flaws, I suppose.  The sculpt does a nice job fitting in all of the details from the game, and I particularly dig the big bulky gloves.  Those are pretty awesome looking!  The paint on Mercury is a bit monochromatic by design, but NECA didn’t just phone it in; they actually put a lot of effort into getting all of those distinct shades of blue on the figure, and she’s better for it.  Even without translucent plastic or light-up features, this figure conveys the whole Tron aesthetic very well.  Kudos to NECA for that.  Rather than the usual disc, Mercury is armed with a cool fighting staff.  It’s translucent with dark blue piping, which has this nice holographic look about it, and it can be fairly easily held in either hand.

THE ME HALF OF THE EQUATION

This figure’s a recent acquisition for me, but it’s been housed in the same place as the rest of my collection for several years now.  It used to be owned by my brother, who decided over this past summer to part with a lot of his action figure collection.  I’ve taken most of the strays in, of course, because, as I’ve noted before, I’m the personification of the Island of Misfit Toys.  In the case of Mercury, it’s actually a figure that I might have tracked down on my own eventually.  I’ve never played Tron 2.0, but this is still a pretty fun figure, and an early sign of how good NECA would eventually get at making consistently awesome stuff.  One of these days, I’ll need to track down the rest of this particular line.

#1456: Annihilus

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ANNIHILUS

MARVEL SUPER HEROES (TOY BIZ)

“Power mad is the only word that can describe the flying nightmare known as Annihilus. He’s not satisfied being the merciless ruler of his own dimension, the bizarre Negative Zone – he wants to be the tyrant of Earth’s universe too! And because he carries the near-limitless force of the awesome Cosmic Control Rod on his chest, he has the power to make his wicked dream a reality! Only the Fantastic Four have been able to block his nightmarish plans of conquest.”

The foes of the Fantastic Four don’t ever seem to get much respect.  Beyond Doctor Doom and Galactus, it’s like they don’t exist.  And that’s a shame, because the FF have a lot of really fun villains.  One such villain is Annihilus, the ruler of the Phantom Zone.  Annihilus has had a few different figures over the years, but he got his very first in 1992, in what was effectively luck of the draw.  I’ll be looking at that figure today.

THE FIGURE ITSELF

Annihilus was released in Series 3 of Toy Biz’s Marvel Super Heroes line.  Series 3 included Toy Biz’s first versions of the Fantastic Four, and they needed a villain to go along with them.  However, Doctor Doom had already been released in Series 1, meaning TB needed another villain.  Why they chose Annihilus is anyone’s guess.  Perhaps they just thought he had the coolest design?  Who knows?  Annihilus is seen here sporting his classic design, which I believe was still the only one he had at the time of this figure’s release.  The figure stands about 5 inches tall and he has 10 points of articulation.  Like most of the others from this line, Annihilus’s sculpt is rather dated, and looks a little out of place with more modern items, or even figures from just a few years later in TB’s run.  The details are a little more simplified, and, most noticeably, he’s really scrawny.  This was a recurring issue, after Toy Biz moved away from the slightly stockier figures of the first two series, where everyone went too far the other direction.  I don’t believe Annihilus has ever been quite this small.  It should be noted, though, that this is still not a bad sculpt.  There’s some nice work on some of the smaller details, especially on the head, which looks good for the time, if perhaps a little goofy in this day and age.  Though jiust how they’d be handled on later figures would vary, the wings on this Annihilus are permanently affixed to the figure, and much like the original Toy Biz Archangel, there’s a wing-flapping action feature that’s operated by the little lever on the back.  It doesn’t offer a ton of motion, and the wings are sort of small and silly, but it’s a mildly amusing little feature.  Paint on Annihilus is fairly simple.  Mostly, he’s just molded in the proper colors, with only a few actual painted details, which are all just straight colors.  It’s hardly inaccurate to his original design, though, so it’s hard to really complain.  Perhaps some metallics would have added some flair, but beyond that, this feels decent enough. Annihilus included no accessories, but he’s got the wings, so that’s at least something.

THE ME HALF OF THE EQUATION

I didn’t have this figure growing up.  Instead, I had the later one from the main Fantastic Four line.  Unfortunately, that one had a removable head, and I lost mine, so I’ve been without a proper Annihilus for a little while.  I’m slowly working my way to getting a complete run of Toy Biz 5-inch figures, so I grabbed this guy at the Dave Hart Toy Show this past summer, in an effort to get one step closer to my goal. He’s sort of a goofy little figure. There’s no denying that.  But, he’s still entertaining, and that’s really all I look for in an action figure.

#1455: Elite Praetorian Guard

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

ELITE PRAETORIAN GUARD

STAR WARS: THE BLACK SERIES

“As the Supreme Leader of the First Order, Snoke was flanked by crimson-clad guardians, loyal protectors encased in ornate armor ready to defend the Supreme Leader from any threat.”

It’s been almost a month since I reviewed the Force Link reader and wrapped up my Last Jedi reviews.  Now I’m back with more!  Woooooo!  I’ve yet to find any of the post-Force Friday basic figure releases, but I have managed to find a few other things of interest.  As with The Force Awakens and Rogue One, there’s a Walmart-exclusive assortment of smaller-scale Black Series figures.  It would seem the timing is a little better this time around, since they started hitting only a week or two after the initial product.  Today, I’ll be looking at that series’ take on the Praetorian Guard!

THE FIGURE ITSELF

The Elite Praetorian Guard is one of the four figures in what is the final series of Walmart-exclusive Black Series figures (the line’s being replaced by the returning Vintage Collection next year).  This guy’s got a different helmet than the one in the two-pack with Rey, denoting he’s a different guard.  I like this one a little more than the last one.  Given the presence of this design in the big playset with Snoke and as the main release in the larger Black Series, I’ve got a sneaking suspicion that this guy might be the “lead” guard, but time will tell.  The figure stands about 4 inches tall and he has 28 points of articulation.  The Guard’s articulation is showing the same improvements we saw with the Rogue One figures, though I found his to be about on par with the Death Trooper, who was definitely the most limited of that bunch.  Still, he’s way easier to mess with than the TFA figures.  The Guard gets an all-new sculpt, which is pretty decent overall.  The upper half is really the best work; it’s sharply detailed, the articulation is pretty well integrated, and the build looks to match what we’ve seen so far of these guys.  The lower half has his skirt piece done with cloth, rather than sculpted.  It looks alright, and helps with porsablity, but the shaping’s definitely a bit off in basic standing poses.  His legs are also really skinny, at least to my eyes.  Like his more basic counterpart, the paint on this guy is pretty simple.  He’s mostly just molded in glossy red plastic, with some slight black detailing here and there.  It still looks pretty slick, and one can hardly fault them for following the film design.  This guy includes one accessory: his spear.  It’s a pretty cool piece, and this figure can hold it with both hands, which is a definite plus.

THE ME HALF OF THE EQUATION

I came across this assortment while I was out searching for a Voltron Keith (who I still haven’t found, by the way).  Luke and Rose weren’t different enough from the basic figures for me to feel they were worth it, and the Executioner’s built on the same body as the rather flawed FO Stormtrooper, so this guy was the only one that came home with me.  Admittedly, I don’t think he’s quite as strong as the Rogue One figures, but he’s still pretty fun, and I’m happy to have him.  Now, let’s wait and see if Hasbro decides to offer all of the helmet variations in this style.

#1454: Phoenix Ikki

Posted by Ethan Wilson in Reviews and tagged with , , , ,

PHOENIX IKKI

KNIGHTS OF THE ZODIAC (BANDAI)

And now for another installment of “Ethan reviews a figure from a source he’s completely unfamiliar with.”

Knights of the Zodiac is…this thing?  Hang on, I can do better than that.  It’s actually a manga and an anime, originally titled Saint Seyia, which showed up in Japan in the ’80s and eventually made its way to the US in the early 2000s.  It’s a story that’s rather heavily inspired by Greek myths…and that’s really it.  Not sure where the whole Zodiac thing came into it.  I’m gonna go ahead and blame the French, since they’re the ones that stuck it in the title when they imported it.  It’s always the French, isn’t it? Odd blaming of an entire nation aside, today I’ll be looking at one of the many figures to come out of the property, based on Phoenix Ikki!

THE FIGURE ITSELF

When the Knights of the Zodiac anime was imported to the US in the early ’00s, Bandai America picked up the license and put out few different styles of figures.  Phoenix Ikki comes from the deluxe line, which was larger scale a featured fancy removable armor.  The figure stands 8 inches tall and has 25 points of articulation.  All of the deluxe figures were built on the same standard body.  It’s well articulated, though perhaps a little mannequin -like in its build.  Given that it’s really just meant to be the starting point of a much more complicated design, it’s not a terrible sculpt.  He gets a unique headsculpt, which is decent, I suppose.  It’s a little bit odd, since Ikki has long hair and they still have account for the helmet and other armor, which means the shaping is a little weird.  Not awful-weird, but still no-human-could-have-that-weird.  At the very least it’s unique.  To complete his look, Ikki includes several pieces of clip-on armor.  There’s a helmet, chest piece, skirt/belt, wrist bracers, and shin guards.  They’re a little bulky, and any gold sections are rather flaky, but otherwise, it’s pretty cool.  The chrome is certainly eye-catching, and I really dig the wings, which are individually articulated.  My figure is missing the skirt and one half of each shin guard, but I find I actually like him better without those pieces.  In regards to paint, the figure’s somewhat basic and a little bit drab for my taste, but the application is at least clean, and nothing notable appears to be missing.  The armor was the main extra here, so no real other accessories were included, but he did include a small dummy to store the armor in, which was pretty cool.

THE ME HALF OF THE EQUATION

When I was much smaller, I watched this show called Mystic Knights, which had a toy line very similar to this one.  Many years later, I found a few of these figures on clearance at KB Toys, so I got them out of an odd bit of nostalgia.  I actually have several volumes of the manga, which I even read, but for the life of me, I couldn’t tell you what happened in any of them.  Nevertheless, this is actually a pretty fun figure, and I’m glad to have it.

#1453: Spider Racer (w/ Spider-Man)

Posted by Ethan Wilson in Reviews and tagged with , , , , ,

SPIDER-RACER (w/ SPIDER-MAN)

SPIDER-MAN: HOMECOMING (HASBRO)

Spider-Man: Homecoming hits physical media next week, and I’m definitely looking forward to giving it another watch.  It was an awesome film that felt a little bit crowded out this summer.  The actual film did great in theatres, but a lot of the tie-in stuff was scarce from day one.  I still haven’t seen the Legends figures in any substantial numbers, and while the more basic line’s coverage has been a little better, it still seemed a little small for a Spider-Man movie.  Back in May, I looked at one of the basic line’s takes on Spidey. I ended up picking up one more item from this line, though it’s admittedly not one directly aimed at my particular demographic.  So, without further ado, here’s Spider-Man driving a car!

THE VEHICLE ITSELF

The Spider-Racer was a mid-sized offering in Hasbro’s basic Spider-Man: Homecoming toyline.  It was released fairly early on, right around the same time as the first four basic figures.  The racer measures about 8 inches long by 5 1/2 inches wide, and it has working wheels and a pop-out Nerf feature.  The overall construction of the racer is new to this particular item, and it’s fairly well-rendered.  The racer is pretty solidly put together, so it’ll hold up to fair bit of play, which is good, since that’s kind of the whole point behind an item like this.  Design-wise, it’s totally concocted from the minds of Hasbro’s designers, of course, but they’ve at least managed to create a vehicle that’s plausible as a real thing.  It’s got consistency in its design as well, so it doesn’t just look like a bunch of random elements tacked together.  There’s a bit of an old-style Formula 1 race car look to it, mixed in with a little bit of the Tumbler from Batman Begins.  It’s hardly the most original thing ever, but I dig it. Throughout the body, there’s lots of little details that add a bit more character to the racer.  I appreciate that they didn’t just leave large chunks of this thing totally smooth and featureless.  The racer’s a single-seater, which is a little bit of a letdown if you’re like me and you want to put a couple of alternate reality Spideys in it for a cross-dimensional adventure, but seems reasonable enough within the confines of a movie-based-racing-centric-solo-hero-vehicle.  The latter’s probably a little more marketable than the former, so I can’t really blame Hasbro on this one.  Paint on the racer is pretty straightforward.  Lot of red and blue, which are the Spider-Man colors and all, so that makes sense.  It’s obviously on the toyetic side of things; it’s not like anyone will be mistaking this for a real scale model of a car or anything.  The application is all pretty clean, and the colors are fairly eye-catching.  One of the selling points of the Spider-Racer is its Nerf feature.  There’s a small Nerf gun built into the left side of the vehicle.  Press it in and it pops out, and then you can shoot a Nerf dart.  There are two Spidey-themed darts included, but only one can be loaded at a time.  It’s a mildly amusing feature, but not particularly powerful.  Since it’s Nerf, though, I did go ahead and get a few words from the FiQ’s resident Nerf-Expert Tim.  Here’s what he had to say about it:

“So, if there’s one defining thing Peter Parker does, besides the whole spider thing, it’s invent stuff.  And take photos.  And get bullied in school, but the inventing is the main thing. That’s why it’s a little disappointing to see that he chose to equip his car with one of the lamest Nerf mechanisms ever.  When you load the dart in the barrel, you press back on the collar piece around it which primes the blaster to fire.  It’s super compact, probably more so than even the Jolt and that means it can at least fold away neatly into the side panel of the car.  It’s the same setup we’ve seen on the Rogue One vehicles and that one Build-A-Saber lightsaber set and it wasn’t great then either.  Sure, it gets the job done, but it might have been nice to see a more  creative solution, especially given who’s driving.”

THE FIGURE ITSELF

A car’s no good without a driver, and by extension, a Spider-Car’s no good without a Spider-Driver.  Fortunately, this Spider-Car does have a Spider-Driver, in the form of an included Spider-Man Spider-Action Figure. Spider.  The figure is very much on the basic side.  He’s about 5 1/2 inches tall (the same scale as the other basic figures) and has 5 points of articulation.  The articulation is less than the other standard figures, but it’s enough to get him seated in the car and holding the controls, and that’s really all this figure needs to do.  Spidey uses the same head and torso as the standard Homecoming Spider-Man, with new arms and legs.  It’s a fairly decent sculpt. Nothing ground breaking, but the costume is translated pretty well here and the proportions look decent enough.  He’s even got all of the proper texture work!  The paint on Spider-Man, like the Racer, is fairly straightforward.  Basic color work with clean application.  At least he doesn’t have any of the weird flaking paint issues the he Homemade costume had.  This figure doesn’t have any accessories, but he’s really just an accessory himself, so it’s excusable here.

THE ME HALF OF THE EQUATION

Okay, I know what you’re thinking: “why’d you buy this, Ethan?” To explain that, I need to give a little history lesson.  Back in the ’70s, Mego was producing their World’s Greatest Super Heroes line.  The Batmobile was a strong seller, so they decided to give all of the big heroes their own themed vehicle.  This included Spider-Man, whose Spider-Car was sort of worked into the comics, albeit in the rather tweaked form of the Spider-Mobile.  The Spider-Mobile’s picked a sort of a cult following over the years (in no part due to some rather brilliant uses by Spider-Man scribe Dan Slott), and I’ve always been a fan of it, as goofy as it is.  So, I saw this on the shelf this summer, in the midst of trying desperately to find Marvel Legends, and it just called to me.  It’s not some amazing piece of unskippable merchandise, but it’s pretty amusing, and will at the very least hold me over until Hasbro releases an official, comics-accurate, Marvel Legends-scaled Spider-Mobile with a Spider-Ham pack-in figure.  Please?

#1452: Nightwing

Posted by Ethan Wilson in Reviews and tagged with , , , ,

NIGHTWING

DC ICONS

I’ve had a bit of theme to my purchases as of late, so for the next few Fridays, I’ll be sort of transferring that theme to the site and taking a weekly look at DC Collectibles’ DC Icons line.  Last week, of course, I looked at Supergirl, the first Icons figure I’ve bought in quite a while.  She was a pretty solid figure, so I went back for more, and grabbed the latest version of Dick Grayson, aka Nightwing.  I’m always in the market for a good Nightwing figure.  Is this one?  Let’s find out!

THE FIGURE ITSELF

Nightwing is part of the fifth series of DC Icons, alongside Supergirl and the Super Sons.  He’s figure 24, which makes him the first in the set numerically.  Poor Nightwing is actually the last man standing from his initial series-mates; last summer he was first shown off in a series with Shazam, Sinestro, and Deadshot, but those three ended up cancelled, and Nightwing was pushed back a ways to be released alongside Supergirl.  Lucky him?  Nightwing’s package cites that he’s based on his appearance in “Hush,” which has always been one of my favorite Nightwing designs.  It dates back to the Hush line’s Nightwing figure, which has long been my favorite figure of the character. Hush’s more streamlined Nightwing design is really strong, so the design makes a lot of sense here, but it’s still a bit weird to wrap my head around a Hush-based figure that doesn’t actually look like a Jim Lee drawing.  Of course, there are worse things than a figure that looks like an Ivan Reis drawing, so I’m hardly going to complain.  The figure stands 6 1/4 inches tall and he has 33 points of articulation.  The upscaling was somewhat evident on Supergirl, but it’s in full force on Nightwing.  He’s not really going to fit in with earlier Icons figures (especially not the Series 1 Batman, which is a little sad), but he’s now a little more at home with something like Marvel Legends.  Just for reference, he’s just a smidge shorter than a Bucky Cap-based figure; the only real inconsistency is the head size, but that’s minor.  Nightwing gets an all-new sculpt, and it’s a very strong one.  The articulation seems quite well worked in, and the figure feels very svelte and streamlined.  The build seems about right for Grayson and the etched-in edges to his logo are very nicely handled.  I wasn’t 100% sold on the head at first (it’s my love of that old DCD Nightwing’s head kicking in there), but after taking the figure out and viewing it from a number of different angles, I’m really happy with it.  Nightwing’s paint work is very strong, apart from one minor issue: the color of his mask.  If this is really a “Hush” Nightwing, then the mask really should be blue, not black.  To be fair to DCC, only the original release of the Hush Nightwing figure got that detail right; all of the re-issues changed it to black.  I have to wonder if it’s some sort of “brand identity” thing.  Beyond that, the paint’s great.  The glossy sheen helps the blue to pop really well up against the matte black, and I also like the high-gloss boots.  This is a very polished looking figure.  Nightwing is packed with his standard Escrima sticks, a batarang attacked to a grapple, and three pairs of hands in fists, and two variations of gripping.  Not a bad assortment.

THE ME HALF OF THE EQUATION

It’s all Cosmic Comix’s fault.  No, really.  They sold out of Nightwing initially, so I just bought Supergirl.  And I only would have bought her, content, and unaware of this figure’s existence.  And then they had to go and ask me if I wanted them to order me one.  Darn them and their clear knowledge of my collecting habits….

This figure’s a very strong offering.  I wasn’t sure about him, just based on how much I love that old Hush figure, but this one’s awesome, if for different reasons, maybe.  Regardless, this figure’s so awesome that I went online to see what other Icons figures were coming out, and that’s when I discovered that not only was the line essentially over, but that there were a ton of really cool figures that I wanted that got cancelled.  Now I am a sad Ethan.  But at least I got Nightwing, right?

#1451: Jedha Revolt

Posted by Ethan Wilson in Reviews and tagged with , , , , , , , ,

JYN ERSO, SAW GERRERA, EDRIO TWO TUBES, & IMPERIAL HOVERTANK PILOT

STAR WARS: ROGUE ONE (HASBRO)

With all of the Last Jedi product floating around, it can be a little difficult to fit in some of my older Star Wars products, especially when it’s stuff that’s only a single movie back.  At least the Power of the Force stuff is noticeably different, right?  Not so much the case with Rogue One, from which I still have a few lingering figures.  Today, I’ll be crossing a few of those off my list and taking a look at the Jedha Revolt boxed-set!

THE FIGURES THEMSELVES

The Jedha Revolt set is comprised of Jyn, Saw Gerrara, Edrio Two Tubes, and an Imperial Hovertank Pilot, all of whom came from the film’s first big set piece, Jedha.  This set is part of the Rogue One line, and is very similar to the Takodana Encounter set from The Force Awakens.  The real notable difference here is that there’s three new figures and one repack, instead of one new figure and three repacks.  Those numbers are better.

JYN ERSO

“Pushing behind a checkered past by lending her skills to a greater cause, Jyn Erso is impetuous, defiant, and eager to bring the battle to the empire.  Used to operating alone, she finds higher purpose by taking on a desperate mission for the Rebel Alliance.”

The Jyn in this set is the same one released in Series 2 of the main line.  I didn’t get that one, though, because I knew this set was coming.  That being said, the mold is also the same one used for the Jyn included with the AT-ACT.  It’s not a bad sculpt at all.  The paint’s a little different on this figure.  It’s not an incredible difference, but there’s enough to notice.  I prefer the work on the AT-ACT figure, truth be told, but I guess this one’s passable.  She gets the same blaster pistol, and adds in her scarf she wears on Jedha for good measure.

SAW GERRERA

“A battered veteran of the Clone Wars as well as ongoing rebellion against the Empire, Saw Gerrera leads a band of Rebel extremists.  Saw has lost much in his decades of combat, but occasional flashes of the charismatic ad caring man he once was shine through his calloused exterior.  Gerrera is bunkered on the ancient world of Jedha, coordinating a prolonged insurgency against the Imperial occupation.  Saw’s ailing health has not withered his resolve to fight.”

Saw is definitely a big selling point of this set, since he’s a fairly prominent character and this is literally the only proper figure of him released at this point.  We see Saw here in his garb from later on in the film, during the “present” sequences.  It’s a sensible choice, since his other look is only seen briefly and it’s not the one he’s sporting on Jedha.  The figure stands about 4 inches tall and has 5 points of articulation…in theory.  All of the joints are there, but you’re not really going to get much range out of any of them.  Saw’s not super agile or anything, so it’s not a big loss, but it’s still slightly frustrating.  The sculpt is all new to this figure, and it’s a fairly nice piece.  There’s quite a bit of detail work going on, and he certainly has a lot of depth.  The head has a passing resemblance to Forrest Whitaker, which is nice, and the overall design seems to have been translated quite nicely.  Saw’s paintwork is generally pretty decent and clean.  I do have one notable complaint, which has to do with the breathing apparatus.  It’s just molded in a solid off-white sort of color, which looks a little goofy.  It really would have looked better if they’d done it in clear plastic and added a few painted details.  Saw is packed with his walking stick which is almost seen carrying in the movie, as well as a small sidearm which he never uses, but is seen carrying on his hip just the same.  Both pieces are nicely detailed and great additions to the figure.

EDRIO TWO TUBES

“Edrio Two Tubes is a mercenary pilot who flies alongside his eggmate, Benthic.  They share the nickname derived from the breathing apparatus that allows Tognath physiology to process oxygen atmospheres.  Edrio’s notice world of Yar Tonga was conquered by the Empire, forcing him to flee as a refugee.  With a desire to strike back at the Empire, Edrio and Benthic have allied with Saw Gerra’s movement on Jedha.”

And now for the “who the heck is this guy?” portion of the set, it’s Edrio Two Tubes!  Yeah, I don’t know either.  But he looks cool, and that’s really the only necessary element for a successful Star Wars character (see: Boba Fett).  The figure stands 3 3/4 inches tall and has the same 5 points of articulation as the rest of the set, albeit in better working order than the ones on Saw.  Edrio gets another all-new sculpt, and it’s certainly top notch.   There’s a lot of really awesome detail work, especially on the jacket.  I dig the similarities between the chest piece and that of the Rebel Pilots.  Definitely a cool touch.  The only real complaint I have is that he’s a little hard to get standing, but once you get him there, he stays up alright.  Edrio’s paint is pretty solid, offering up clean base work, as well as some pretty sweet accent work on his jacket.  He definitely has the best work in the set.  He’s packed with a big ol’ rifle, which he sadly can’t hold particularly well, due to the limitations of his posability.  You can still get a decent “over the shoulder” sort of look, so it’s workable.

IMPERIAL HOVERTANK PILOT

“Imperial combat drivers operate the Empire’s arsenal of armored repulser vehicles, from troop transports to heavily armored hovertanks.  Combat drivers are lightly armored, relying instead on the thick skin of their vehicles to protect them in battle.” 

No set would be complete without some sort of Stormtrooper variant, and this one actually gets one of my favorites.  We got the Hovertank Pilot in the 6-inch line pretty early on, but it’s certainly still cool to get him again in the smaller scale.  The figure is largely built from re-purposed parts from the standard Shoretrooper.  It’s a more than adequate starting point, as that was a pretty solid figure in its own right.  He gets a new head and belt, both of which are incredibly sharp sculpts, which certainly add a lot of polish to the final figure.  The paint on this guy is pretty straightforward, off-white and dark brown.  It’s all cleanly applied, though, and he looks pretty spiffy.  He’s packed with a large blaster rifle, which is the same one we saw with the Shoretrooper, Scarif Squad Leader, and AT-ACT Driver.

THE ME HALF OF THE EQUATION

I was rather excited for this set when it was first shown off, but by the time it actually hit about 6 months later, I had sort of cooled down, and was actually in a bit of a tight spot financially.  Fortunately, it stuck around for a bit, and I was actually able to pick it up from Target for about half of its original value.  I will say, this one definitely has a lot more to offer than the TFA set, since most of the figures are new.  Saw, Edrio, and the Hovertank Pilot are all really solid offerings, and are among some of my favorite figures from the Rogue One line.